siemens setup manuals

Siemens

Setup Manuals

Siemens C-arm Arcadis Varic Orbic with LASER IMAGER Products

Author: [email protected], Edition: May ´05 1

Setup Siemens C-arm Arcadis Varic Orbic with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (1) ............................... 4

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1).................................................................... 6


n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 10

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 12


n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................ 16

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ............................. 18

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 20


n Kodak DryView 8900 LASER IMAGER......................................................................... 24 n Kodak DryView 8150 LASER IMAGER......................................................................... 26 n Kodak Color Medical Imager 1000 ................................................................................. 28

1 Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. 2 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER.



Siemens Arcadis Varic via DICOM with Kodak DryView 8300 LASER IMAGER

Requirements: Arcadis Varic syngo platform VB10B Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,

DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2256x2676, Medium Type=Blue Film, Film Destination=Processor, press button Save

- into Local Service/Config/DICOM LUT files set: XRF Image= xrfCorr16b-bspline, Max Density=3.00

8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group=4

Kodak DryView 8300

DICOM Network

Siemens C-armArcadis Varicsyngo platform



Siemens Arcadis Varic via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: Arcadis Varic syngo platform VB10B Requirements: 190 rel. 1.7.29 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190,

DICOM Node=k190, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4096x5120, Medium Type=Blue Film, Film Destination=Processor, press button Save

- into Local Service/Config/DICOM LUT files set : XRF Image= xrfCorr16b-bspline, Max Density=3.00

190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape= 0.0, Contrast=0, n Contrast Pivot Density=1.2, IPAddress=accordingly, n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

DICOM Network

Kodak 190 cameraSiemens C-armArcadis Varicsyngo platform



Arcadis Varic via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ)

Requirements: Arcadis Varic syngo platform VB10B Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File

syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700,



9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

on Device Setup, SCP PRINTERS, Current Providers:

Kodak DryView 8700 Plus

Kodak 9410 PACS Link

DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable




n Printer=8700, AE Title=9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle= accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60




Kodak DryView 8100 LASER IMAGER

Requirements: Arcadis Varic syngo platform VB10B Requirements: 9410 v1.6, 8100 v2.4.1 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100,



9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No

Kodak DryView 8100Kodak 9410 PACS Link

DICOM Network

COPCIL BoardCopper Cable Control 9-pin

Data 37-pin

RS4229-pole Plug




n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=ver693c0.w87 n on LOCAL PANEL: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even





Requirements: Arcadis Varic syngo platform VB10B Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,



9410 Setup: n on Device Setup, LOCAL PRINTERS:

n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u

n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No

Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin

COPCIL board Copper Cable




n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 ie Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1



Arcadis Varic via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 160 LASER IMAGER

Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, KELI 160 v7.2 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name= k160, Host Sel.= k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160,

DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save


MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set:

n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On

Kodak MIM 200

DICOM Network

Crossed Network Cable

Kodak 160 cameraSiemens C-armArcadis Varicsyngo platform



n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

160 Setup: no modality-specific setup needed




Kodak Ektascan 2180 LASER PRINTER

Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, 2180 v2.17H Syngo setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180,




n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set:

n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200




n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off

2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed





Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, 1120 v2.40/032 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120,

DICOM Node=kodak1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save




n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200




n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM 200 v6.1, DV8200 v3.5 Syngo setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name= k8200, Host Sel.= k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device= k8200, Type=DICOM Printer, Class=kodak8200,

DICOM Node= k8200, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4360x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save


MIM200 Setup: n on Configure, Network:

n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly

n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9

n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On

Kodak MIM 200

DICOM Network

CrossedNetwork Cable

Kodak DryView 8200




n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025





Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and in case of 8500 and HQ by installing 8500 and HQ into syngo DICOM Camera Config.File

syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700,


- into Local Service/Config/DICOM LUT files set XRF Image= xrfCorr16b-bspline, Max Density=3.00

MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:

n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:

n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue

Kodak DryView 8700 PlusKodak MIM 200

DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable




n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)= 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60





Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, 8100 v2.4.1 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100,





n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

Kodak DryView 8100Kodak MIM 200

DICOM Network


Data 37-pin

RS4229-pole Plug





n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even





Requirements: Arcadis Varic syngo platform VB10B Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,






n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Kodak DryView 8300

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin





n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= wrkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off




Arcadis Varic via DICOM with Kodak DryView 8900 LASER IMAGER

Requirements: Arcadis Varic syngo platform VB10B Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB

(or kodak8900 and in this case 2mm Border=No, or kodak8200), DICOM Node=kodak8900, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4448x5306, Medium Type=Blue Film, Film Destination=Processor, press button Save


8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:

n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination:

n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any

n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On

DICOM Network

Kodak DryView 8900




n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast=2 (Always=Y) n Smoothing Type=0 (Always=Y), Image Polarity=Normal (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=carm



Arcadis Varic via DICOM with Kodak DryView 8150 LASER IMAGER

Requirements: Arcadis Varic syngo platform VB10B Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200),

DICOM Node=kodak8150, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4438x5390, Medium Type=Blue Film, Film Destination=Processor, press button Save


8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On

DICOM Network

Kodak DryView 8150




n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=carm



Arcadis Varic via DICOM with Kodak Color Medical Imager 1000

Requirements: Arcadis syngo platform VB11A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer,

Class=kodakCMI1000 (or imation8300), DICOM Node=ek1000, Pixel Size=81x81, Film Sheet Formats: A4 (or A), it appears media sheet size=A4 (or A), Size/Pixel=2508x3134 (or 2508x2954), Medium Type=Paper, Film Destination=Processor, color appearance=Color 24 bit (or Grayscale 8 bit), background=white, Transformation=no magnification, press button Save


CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)

n Match Monitor Colors=default ie sRGB Color Space Profile.icm n Adjust Color Tones=default ie Default_Contrast_100.icm

n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP: n under Image Quality, Grayscale Image Quality:

DICOM Network

Kodak CMI 1000

Siemens C-armArcadis - Varic- Orbicsyngo platform



n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No

n under Modality Defaults: n Media Size=8.5x11 (Always=N), don’t care, this field plays no role n Image Resizing=Minify (Always=N), n Priority=Normal (Always=N), NeventReports=No (Always=Y), n Warnings=Yes, Color=Yes n (set Color=No when only b/w images are printed and set it to be sure n to apply to the b/w images the Greyscale Image Quality settings) n Page Annotation: n Hosp.Name=No, Modality ID=No, Page Nbr=No, Date=No, Time= No

n Save Changes and Exit

Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGER Products


Setup Siemens C-arm Siremobil Compact / ISO-C with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (1)............... 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8100 LASER IMAGER (1).................................................................... 8 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8300 LASER IMAGER (1).................................................................... 10 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 160 LASER IMAGER (2,3,4) ................................................................. 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 2180 LASER PRINTER (2,3,4) .............................................................. 17 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Kodak DryView 8200 LASER IMAGER (3,4,5) ............................................................... 23 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual) (4,5) ............ 26 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)(4,5) 29 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8100 LASER IMAGER (4,5).................................................................. 32 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8300 LASER IMAGER (4,5).................................................................. 35 n Kodak DryView 8900 LASER IMAGER......................................................................... 38 n Kodak DryView 8150 LASER IMAGER......................................................................... 41 n Kodak Color Medical Imager 1000 ................................................................................. 44




Siremobil Compact / ISO-C via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens C-armSiremobil CompactDICOM-bridge

Kodak DryView 8300

DICOM Network

Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8300; Destination alias name AE_TITLE = K8300 HOST_NAME = e.g., DV8300; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 104 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM; Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 8INX10IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 0; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity



- into file C:\bridge\hosts set: the-8300-IPaddress DV8300 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8300] PORT_NUMBER=104 HOST_NAME=IP address of 8300 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer 8300 Setup: n on 8300 Operator Menu into Configure User set:

n Density=16, Contrast=4, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set:

n Modality Group=2



Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)




DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: Siremobil Compact / ISO-C rel. VA00A, 9410 v1.6, 8500 v1.34 Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into 9410 Local Printers Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8500; Destination alias name AE_TITLE = 9410 HOST_NAME = e.g., PACSL_85; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 1024 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM; Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 11INX14IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type 2010,0100 BLACK; Border Density



2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-9410-IPaddress PACSL_85 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8500] PORT_NUMBER=1024 HOST_NAME=IP address of 9410 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer 9410 Setup: n on Device Setup, LOCAL PRINTERS:

n Printer=8500, Model=8500, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8500, AE Title=9410, Port=1024, Max Associations=5

n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8500, Copies=1, Contrast Table=15, TFT/ULUT=Siefl87b.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0





Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)




DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: Siremobil Compact / ISO-C rel. VA00A, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8700; Destination alias name AE_TITLE = 9410 HOST_NAME = e.g., PACSL_87; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 1024 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type 2010,0100 BLACK; Border Density



2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-9410-IPaddress PACSL_87 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8700] PORT_NUMBER=1024 HOST_NAME=IP address of 9410 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer 9410 Setup: n on Device Setup, LOCAL PRINTERS:











DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Siremobil Compact / ISO-C rel. VA00A, 9410 v1.6, 8100 v2.4.1 Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8100; Destination alias name AE_TITLE = 9410 HOST_NAME = e.g., PACSL_81; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 1024 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim



2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-9410-IPaddress PACSL_81 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8100] PORT_NUMBER=1024 HOST_NAME=IP address of 9410 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer 9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port=1024, Max Associations=5

on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=15, TFT/ULUT=Siefl87b.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8300; Destination alias name AE_TITLE = 9410 HOST_NAME = e.g., PACSL_83; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 1024 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 8INX10IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 0; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim



2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-9410-IPaddress PACSL_83 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8300] PORT_NUMBER=1024 HOST_NAME=IP address of 9410 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer 9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=4, TFT/ULUT=693c0.w8u n Max.Density=300, Border=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1



Siremobil Compact / ISO-C via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: Siremobil Compact / ISO-C rel. VA00A, 190 rel. 1.7.29 Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = KODAK_190; Destination alias name AE_TITLE = K190 HOST_NAME = e.g., MLP190; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 NORMAL; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity



- into file C:\bridge\hosts set: the-190-IPaddress MLP190 - into file C:\bridge\Mergecom.app set: [KODAK_190] PORT_NUMBER=5040 HOST_NAME=IP address of 190 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=MLP190, Connection Type=RJ45



Siremobil Compact / ISO-C via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = KODAK_160; Destination alias name AE_TITLE = K160 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 NORMAL; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density



2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [KODAK_160] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer MIM200 Setup: n on Configure, Network:

n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly


n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7



n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=4 i.e., 575 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200 Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = KODAK_2180; Destination alias name AE_TITLE = K2180 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 NORMAL; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density






n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7






DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200 Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = KODAK_1120; Destination alias name AE_TITLE = K1120 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 NORMAL; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density






n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7






Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8200; Destination alias name AE_TITLE = K8200 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density



2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8200] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y)



n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off





Kodak DryView 8500 LASER IMAGER / Plus (see also 8800/8500 Dual)



Kodak MIM 200

DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: Siremobil Compact / ISO-C rel. VA00A, MIM200 v6.1, 8500 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8500 Dual camera

by basically using the correspondent Model into MIM200 Destination Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8500; Destination alias name AE_TITLE = K8500 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM; Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 11INX14IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type



2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8500] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8500, Set: n General: Log.Name=8500 n General: Database Name=8500, Model=8500, Memory=32 n Media Info: Media=11x14in, 3388x4283, 4193, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=6 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7



n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=11INx14IN (Always=N), Negotiate Color Print=Off

8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60







Kodak MIM 200

DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: Siremobil Compact / ISO-C rel. VA00A, MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8700; Destination alias name AE_TITLE = K8700 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type



2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim 2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8700] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:

n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N)



n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Siremobil Compact / ISO-C rel. VA00A, MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer

Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed

Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8100; Destination alias name AE_TITLE = K8100 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 14INX17IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 2; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim



2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8100] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N)



n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0







Kodak DryView 8300

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin


Requirements: Siremobil Compact / ISO-C rel. VA00A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer

Note: on Siremobil Compact / ISO-C only a DICOM camera could be installed

Siremobil Compact / ISO-C Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8300; Destination alias name AE_TITLE = K8300 HOST_NAME = e.g., MIM; Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED; Print Priority 2000,0030 BLUE_FILM;Medium Type 2000,0040 PROCESSOR; Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT; Film Session Label 2010,0040 PORTRAIT; Film Orientation 2010,0050 8INX10IN; Film Size 2010,0060 CUBIC; Magnification Type 2010,0080 0; Smoothing Type 2010,0100 BLACK; Border Density 2010,0110 BLACK; Empty Image Density 2010,0130 300; Max density 2010,0140 NO; Trim



2020,0020 NORMAL; Polarity - into file C:\bridge\hosts set: the-MIM200-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8300] PORT_NUMBER=5040 HOST_NAME=IP address of MIM200 SERVICE_LIST=Print_Service_List - reboot the DICOM Bridge computer MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify:

n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=693c0.w8u (Always=Y), Contrast (dry)=4 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N)



n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1




Requirements: Siremobil Compact rel. VA00A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on Siremobil Compact only a DICOM camera could be installed Siremobil Compact Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8900 ;Destination alias name AE_TITLE = K8900 HOST_NAME = eg DV8900 ;Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED ;Print Priority 2000,0030 BLUE_FILM ;Medium Type 2000,0040 PROCESSOR ;Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT ;Film Session Label 2010,0040 PORTRAIT ;Film Orientation 2010,0050 14INX17IN ;Film Size 2010,0060 CUBIC ;Magnification Type 2010,0080 2 ;Smoothing Type 2010,0100 BLACK ;Border Density 2010,0110 BLACK ;Empty Image Density 2010,0130 300 ;Max density 2010,0140 NO ;Trim 2020,0020 NORMAL ;Polarity


DICOM Network

Kodak DryView 8900



- into file C:\bridge\hosts set: the-8900-IPaddress DV8900 - into file C:\bridge\Mergecom.app set: [DRYVIEW_8900] PORT_NUMBER=5040 HOST_NAME= IP address of 8900 SERVICE_LIST= Print_Service_List - reboot the DICOM Bridge computer 8900 Setup: n on Configuration, System, Network:

n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly

n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM

n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Siefl87b.w87 (Always=Y) n Contrast= 15 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=carm




Requirements: Siremobil Compact rel. VA00A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: on Siremobil Compact only a DICOM camera could be installed Siremobil Compact Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = DRYVIEW_8150 ;Destination alias name AE_TITLE = DV8150 HOST_NAME = eg MIM ;Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 STANDARD\3,3 STANDARD\4,5 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED ;Print Priority 2000,0030 BLUE_FILM ;Medium Type 2000,0040 PROCESSOR ;Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT ;Film Session Label 2010,0040 PORTRAIT ;Film Orientation 2010,0050 14INX17IN ;Film Size 2010,0060 CUBIC ;Magnification Type 2010,0080 2 ;Smoothing Type 2010,0100 BLACK ;Border Density 2010,0110 BLACK ;Empty Image Density 2010,0130 300 ;Max density 2010,0140 NO ;Trim 2020,0020 NORMAL ;Polarity


DICOM Network

Kodak DryView 8150



- into file C:\bridge\hosts set: the-8150-IPaddress MIM - into file C:\bridge\Mergecom.app set: [DRYVIEW_8150] PORT_NUMBER=5040 HOST_NAME= IP address of 81500 SERVICE_LIST= Print_Service_List - reboot the DICOM Bridge computer 8150 Setup: n on Configuration, System, Network:

n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly


n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name= Siefl87b.w87 (Always=Y) n Contrast=15 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=carm



Siremobil Compact / ISO-C via DICOM with Kodak Color Medical Imager 1000

Requirements: Siremobil Compact rel. VA00A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: on Siremobil Compact only a DICOM camera could be installed Siremobil Compact Setup: - into file C:\bridge\bridge.cfg set: [PRINT_NODE_1] DESCRIPTION = CMI_1000 ;Destination alias name AE_TITLE =CMI1000 HOST_NAME = eg CMI1000 ;Destination machine name IP_ADDRESS = accordingly PORT_NUM = 5040 FILM_FORMAT = STANDARD\1,1 STANDARD\2,2 STANDARD\2,3 NUMBER_COPIES = 1 MAX_NUMBER_COPIES = 10 COLLATION = DISABLED ASPECT_RATIO_CORRECTION = DISABLED ASPECT_RATIO_INTERPOLATION = REPLICATE 2000,0020 MED ;Print Priority 2000,0030 BLUE_FILM ;Medium Type 2000,0040 PROCESSOR ;Film Destination 2000,0050 SIEMENS_SIREMOBIL_COMPACT ;Film Session Label 2010,0040 PORTRAIT ;Film Orientation 2010,0050 8INX10IN ;Film Size 2010,0060 CUBIC ;Magnification Type 2010,0080 2 ;Smoothing Type 2010,0100 BLACK ;Border Density 2010,0110 BLACK ;Empty Image Density 2010,0130 300 ;Max density 2010,0140 NO ;Trim 2020,0020 NORMAL ;Polarity - into file C:\bridge\hosts set: the-CMI1000-IPaddress CMI1000

DICOM Network

Kodak CMI 1000




- into file C:\bridge\Mergecom.app set: [CMI_1000] PORT_NUMBER=5040 HOST_NAME= IP address of CMI1000 SERVICE_LIST= Print_Service_List - reboot the DICOM Bridge computer CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:

n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040

n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)



n Contrast=15 (Always=Y) n TFT Set (From list)=Siefl87b.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Siemens C-arm Siremobil ISO-C 3D with LASER IMAGER Products


Setup Siemens C-arm Siremobil ISO-C 3D with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /















Siemens Siremobil ISO-C 3D via DICOM with Kodak DryView 8300 LASER IMAGER

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,


- into Local Service/Config/DICOM LUT files set: XRF Image= xrf (or xrf_16bin), Max Density=3.00


Kodak DryView 8300

DICOM Network

Siemens C-armSiremobil ISO-C 3Dsyngo platform



Siemens Siremobil ISO-C 3D via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 190 rel. 1.7.29 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190,


- into Local Service/Config/DICOM LUT files set : XRF Image= xrf (or xrf_16bin), Max Density=3.00

190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape= 0.0, Contrast=0, n Contrast Pivot Density=1.2, IPAddress=accordingly, n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45

DICOM Network

Kodak 190 cameraSiemens C-armSiremobil ISO-C 3Dsyngo platform



Siremobil ISO-C 3D via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,


syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700,



9410 Setup:






DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable



n Printer=8700, AE Title=9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle= accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60





Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 9410 v1.6, 8100 v2.4.1 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100,



9410 Setup: on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=9410, Port= 1024, Max Associations= 5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No


DICOM Network


Data 37-pin

RS4229-pole Plug




n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0






Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,





n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port= 1024, Max Associations= 5 n on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No

Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin





Siremobil ISO-C 3D via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, KELI 160 v7.2 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name= k160, Host Sel.= k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160,

DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save




n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On

Kodak MIM 200

DICOM Network


Kodak 160 cameraSiemens C-armSiremobil ISO-C 3Dsyngo platform



n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, 2180 v2.17H Syngo setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180,





n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200





n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off






Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, 1120 v2.40/032 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120,

DICOM Node=kodak1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save




n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On

DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200




n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape= 0.0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM 200 v6.1, DV8200 v3.5 Syngo setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name= k8200, Host Sel.= k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device= k8200, Type=DICOM Printer, Class=kodak8200,

DICOM Node= k8200, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=eg Inch14x17, Size/Pixel=4360x5220, Medium Type=Blue Film, Film Destination=Processor, press button Save





n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On

Kodak MIM 200

DICOM Network


Kodak DryView 8200




n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space= On, Variable Border=On, PLUT Service= On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7







Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,


syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700,


- into Local Service/Config/DICOM LUT files set XRF Image= xrf (or xrf_16bin), Max Density=3.00



n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue


DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable




n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= Wrkstn2a.w87 (Always=Y), Contrast (dry)= 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off






Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, 8100 v2.4.1 syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100,





n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On


DICOM Network


Data 37-pin

RS4229-pole Plug





n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off

8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=90, P1,…,P6=0






Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,






n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Kodak DryView 8300

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin





n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= wrkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off




Siremobil ISO-C 3D via DICOM with Kodak DryView 8900 LASER IMAGER

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB







DICOM Network

Kodak DryView 8900





n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast=2 (Always=Y) n Smoothing Type=0 (Always=Y), Image Polarity=Normal (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=carm



Siremobil ISO-C 3D via DICOM with Kodak DryView 8150 LASER IMAGER

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200),






DICOM Network

Kodak DryView 8150





n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=carm



Siremobil ISO-C 3D via DICOM with Kodak Color Medical Imager 1000

Requirements: Siremobil ISO-C 3D syngo platform and 3D sw version VC00B Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer,






DICOM Network

Kodak CMI 1000


Siemens C-arm Uroskop Access with LASER IMAGER Products


Setup for Siemens C-arm Uroskop Access with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /















Uroskop Access via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens Uroskope AccessASPIA platform

Kodak DryView 8300

DICOM Network

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,


n into Local Service/Config/DICOM LUT files set: XRF Image=xrf, Max Density=3.00




Uroskop Access via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 190 rel. 1.7.29 Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190,


n into Local Service/Config/DICOM LUT files set : XRF Image=xrf, Max Density=3.00

190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=0.0, Contrast=0 n Contrast Pivot Density=1.2, IPAddress=accordingly n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Uroskop Access via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,


Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700,



9410 Setup:





n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100,



9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=1, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0



n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,





n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1



n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




Uroskop Access via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k160, Host Sel.=k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160,

DICOM Node=k160, Pixel Size=78x78, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4360x5348, Medium Type=Blue Film, Film Destination=Processor, press button Save


MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnification n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180,





n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On



n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnification n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120,

DICOM Node=kodak1120, Pixel Size=80x80, Film Sheet Formats: Inch14x17, it appears media sheet size=e.g., Inch14x17, Size/Pixel=4096x5132, Medium Type=Blue Film, Film Destination=Processor, press button Save




n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On



n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnification n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off







Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8200, Host Sel.=k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device=k8200, Type=DICOM Printer, Class=kodak8200,






n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On



n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7









DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,


Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Test step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700,






n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700



n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7


8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Disable Even, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100,





n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On



n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Wrkstn2a.w87 (Always=Y), Contrast (dry)=1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=Y) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off









DICOM Network

Control 9 pin

Data 37 pin


Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo configured Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,






n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On



n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=wkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off





Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB


- into Local Service/Config/DICOM LUT files set XRF Image= xrf, Max Density=3.00






DICOM Network

Kodak DryView 8900




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Wrkstn2a.w87 (Always=Y) n Contrast= 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=urosk




Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200),






Siemens Uroskop AccessASPIA platform

DICOM Network

Kodak DryView 8150




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=urosk



Uroskop Access via DICOM with Kodak Color Medical Imager 1000

Requirements: Uroskop Access platform ASPIA rel. VA13A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Image Data lutted by syngo, linear-in-Density LUT into Camera syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer,





n Note: Grayscale IQ settings used when images sent with Grayscale DICOM SOP:

DICOM Network

Kodak CMI 1000

Siemens Uroskop AccessASPIA platform



n under Image Quality, Grayscale Image Quality: n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Siemens CT platforms Somaris 2, 3, 4, based on SUN with LASER IMAGER Products


Setup for Siemens CT Plus-S, AR, Plus 4 with LASER IMAGERS

Important note: from beg. 2001 CT models Balance/Emotion/Esprit switched to the Somaris 5 syngo-based platform (see setup there).

Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8700 LASER IMAGER / Dual Printer.................................................. 3 n Kodak DryView 8700 LASER IMAGER / Plus............................................................... 4 n Kodak DryView 8700 LASER IMAGER / Standard ....................................................... 5 n Kodak DryView 8800 MULTI-INPUT MANAGER /


Kodak DryView 8300 LASER IMAGER / Dual Printer.................................................. 9 n Kodak DryView 8300 LASER IMAGER / Standalone.................................................... 10 n Kodak Digital Science 969 HQ LASER IMAGER...................................................... 11 n Kodak Digital Science 969 HQT LASER IMAGER ................................................... 12 n Kodak Digital Science 959 XL LASER IMAGER ...................................................... 13 n Kodak DryView 8100 LASER IMAGER......................................................................... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) ...... 15 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /

Kodak DryView 8100 LASER IMAGER......................................................................... 17 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /

Kodak DryView 8300 LASER IMAGER......................................................................... 19 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) /

Kodak Ektascan 160 LASER IMAGER .......................................................................... 21 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) /

Kodak Ektascan 2180 LASER PRINTER ....................................................................... 23 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) /

Kodak Ektascan 1120 LASER PRINTER ....................................................................... 25 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) . 27 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8100 LASER IMAGER (4).................................................................... 29 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Kodak DryView 8900 LASER IMAGER ........................................................................ 33




Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 35 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 36 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ)...... 37 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /






Kodak DryView 8200 LASER IMAGER......................................................................... 49 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /






Siemens CT with Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8700 LASER IMAGER / Dual Printer

DEIB

Fiber Cable Fiber Cable

8800 MIM

UKEIB

RS232 25-to-9 pin Host Adaptor Cable

Host

Siemens Host Protocol Translator

SPCI

SPDI

Keypad Siemens 25-pin Control Cable

Siemens 37-pin Data Cable

Siemens CT

8700 Dual Fiber Cable 3 M 8 7 0 0 D r y V i e w

3 M 8 8 0 0 M u l t i - I n p u t M a n a g e r

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, 8800 rel. 4.2, 8700 rel. 1.15 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT.

Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera:

into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 and press Set Parameters into Exposure->Job Controller: press Continue

n on SHPT Service Screen set Modality=Somatom, Camera Type=XL, Timeout=10 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9

8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak)

n TFT=B3C5, Dmax=3.00, Contrast=8, Density=14 n on HOST Menu:

n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=13

n on EIB Menu: Parity=Disable, Timeout=10



Siemens CT with Kodak DryView 8700 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB

RS232 25-to-9 pinHost Adaptor Cable

HostSPCI

SPDI

Siemens 25-pinControl Cable

Siemens 37-pinData Cable

Siemens CT

8700 Plus

3M 8700 DryView

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: 8700 rel. 1.15 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT.

Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera:


n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Right


8700 Plus Setup: n on COMM Menu: Siemens Default n on SIEMENS Menu:

n Modality=Somatom, Timeout=10, Smooth Beta=13, Sharp Beta=13 n on IMAGE Menu: (note: image quality setup proposed by Kodak)

n TFT=B3C5, Dmax=3.00, Contrast=8, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=10



Siemens CT with Kodak DryView 8700 LASER IMAGER / Standard


SPCI

SPDI



Siemens CT

8700 Standard

3M 8700 DryView

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: 8700 rel. 1.15 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera:


Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25

Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 8700 Standard Setup: n on TDB/C board: Jumpers=RS232, Switch=Right n on COMM Menu: Siemens Default n on SIEMENS Menu:

n Modality=Somatom, Timeout=10, Smooth Beta=13, Sharp Beta=13 n on IMAGE Menu: (note: image quality setup proposed by Kodak)

n TFT=B3C5, Dmax=3.00, Contrast=8, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=10



Siemens CT with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer

DEIB

Fiber Cable Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI



Siemens CT

8500 Dual Fiber Cable 3 M 8 7 0 0 D r y V i e w 3 M 8 8 0 0 M u l t i - I n p u t M a n a g e r


Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT to set Density and Contrast for the Camera:


n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=10 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right


8800/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak)






Siemens CT with Kodak DryView 8500 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB


Host


SPCI

SPDI

KeypadSiemens 25-pinControl Cable


Siemens CT

8500 Plus

3M 8700 DryView

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, 8500 rel. 1.22 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT.





8500 Plus Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak)



n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=10



Siemens CT with Kodak DryView 8500 LASER IMAGER / Standard

9-to-9-pinCopper Cable

UKEIB


Host


SPCI

SPDI



Siemens CT

8500 Standard

3M 8700 DryView

Imager

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, 8500 rel. 1.22 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT.





8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Center n on COMM Menu: 959 Default n on IMAGE Menu:(note: image quality setup proposed by Kodak)






Siemens CT with Kodak DryView 8800 MULTI-INPUT MANAGER /


8300 Dual

DEIB Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM

POEIB 37-pin Digital Cable

9-to-9-pin Copper Cable

UKEIB


Host


SPCI

SPDI



Siemens CT





8300 Setup: n on 8300 Operator Menu set: Film Layout: Format=1on 1, Mode=Portrait n on 8300 Service Menu set:

n Serial Control:1200,8,1,Even,3M; Digital Interface:Parity=None n Modality Group=0 (note: image quality setup proposed by Kodak)

8800 Setup: n on COMM Menu: 959 Default; on IMAGE Menu:Density=16, Contrast=7 n on HOST Menu:





Siemens CT with Kodak DryView 8300 LASER IMAGER / Standalone

UKEIB


ImagerHost


RS422 9-pinCopper Cable

SPCI

SPDI

Keypad



Siemens CT

8300

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, 8300 rel. 4.4 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT to set Density and Contrast for the Camera:



Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 8300 Setup: n on 8300 Operator Menu set:

n Density=16 n Contrast=7 n Film Layout: Format=1on 1, 2 on 1, 4 on 1, 6 on 1, Mode=Portrait

n on 8300 Service Menu set: n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8,

Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None, Modality Group=0



Siemens CT with Kodak Digital Science 969 HQ LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M969 HQ

UKEIB


Host


SPCI

SPDI



Siemens CT

3 M H Q L a s e r I m a g e r

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, HQ rel. 4.2 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT.





M969 HQ Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak)

n TFT=693C0, Dmax=3.00, Contrast=6, Density=14 n on HOST Menu:

n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on EIB Menu: Parity=Disable, Timeout=10



Siemens CT with Kodak Digital Science 969 HQT LASER IMAGER

M969 HQTRS232 25-to-9 pinHost Adaptor Cable

SPCI

SPDI



Siemens CT


Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0. Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT to set Density and Contrast for the Camera:



Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 M969 HQT Setup: n on TDB/C board:

n Jumpers=RS232, Switch=Right n on COMM Menu:

n Siemens Default n on SIEMENS Menu:

n Modality=Somatom, Timeout=10 n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry)

n TFT=693C0, Contrast=8, Density=6, on OIC Menu: Chemistry=2 n on SYSTEM Menu:

n Memory Management=Best Fit n on EIB Menu:

n Parity=Disable, Timeout=10



Siemens CT with Kodak Digital Science 959 XL LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M959 XL

UKEIB


Host


SPCI

SPDI



Siemens CT

3M L a ser I m ag er

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT rel. 1.3, XL rel. 3.8 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File XL n on Siemens CT to set Density and Contrast for the Camera:

into Exposure->Job Controller: press Stop into System->Camera: set Density & LUT depending on chemistry

into System->Camera: press Set Parameters into Exposure->Job Controller: press Continue

n on SHPT Service Screen set Modality=Somatom, Camera Type=XL, Timeout=10 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 M959 XL Setup: n on COMM Menu: 959 Default n on EIB Menu: Parity=Disable, Timeout=10



Siemens CT with Kodak DryView 8100 LASER IMAGER


UKEIB


Host


SPCI

SPDI



Siemens CT

DryView 8100

Imager

RS422 9-pole Plug

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT v1.3, 8100 v1.1 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. Setup: n on Siemens CT install Camera Config.File XL or HQ or DRYVIEW n on Siemens CT to set Density and Contrast for the Camera:

into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 and press Set Parameters

into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=XL, Timeout=10 n on SHPT Service Screen set Sharp Beta=13, Smooth Beta=13 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=10, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=13 n on IMAGE QUALITY-> TFT FILES Menu: TFT=PMS n on LOCAL PANEL Menu: Contrast=9, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Disable



Siemens CT via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


DPCCopper Cable

DPI4-to-DPC Cable

UKEIB


Host


SPCI

SPDI



Siemens CT

Fiber Cable

Fiber Cable

25-9 DPC-UKEIB Cable


3M8700 DryView

Kodak DryView 8700 Plus Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT v1.3, 9410 v1.6, 8700 v1.26 Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers. Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera:

into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8


n on SHPT Service Screen set Modality=Somatom,Camera Type=XL, Timeout=10 n on SHPT Service Screen set Sharp Beta=13, Smooth Beta=13 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right




9410 Setup: on Device Setup, LOCAL PRINTERS:

n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=10, Parity=None, Memory=7 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200

on Device Setup, HOST KEYPADS: n Kpad=ct, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=b3c5.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Dest.=Printer 1, Media Size=14x17, C=8, D=14 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60





DPCCopper Cable

DPI4 Cable

UKEIB


Host


SPCI

SPDI



Siemens CT

Kodak DryView 8100

Control 9-pin

Data 37 pin

DPC-to-UKEIB Cable


COPCIL BoardCopper Cable

RS4229-pole Plug

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT v1.3, 9410 v1.6, 8100 v2.1.2 Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File XL or HQ or DRYVIEW n on Siemens CT to set Density and Contrast for the Camera:

into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=8 and press Set Parameters

into Exposure->Job Controller: press Continue n on SHPT Service Screen set Modality=Somatom, Camera Type=XL, Timeout=10 n on SHPT Service Screen set Sharp Beta=13, Smooth Beta=13 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right




n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


on Device Setup, HOST KEYPADS: n Kpad=ct, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=B3c5ax4.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=8, D=14 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even





DPCCopper Cable

DPI4 Cable

UKEIB


Host


SPCI

SPDI



Siemens CT

Kodak DryView 8300

Control 9-pin

Data 37 pin

DPC-to-UKEIB Cable



Imager

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: SHPT v1.3, 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B, 8300 16 MB Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File 3M_HQ n on Siemens CT to set Density and Contrast for the Camera:


n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=10 n on SHPT Service Screen set Sharp Beta=0, Smooth Beta=0 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right Note: n power-up the UKEIB separately so that the UKEIB is always on, i.e., not from CT,

otherwise when CT is switched-off, also UKEIB is off and host control link is lost. n on Siemens CT select on Exposure->Settings the film size 8x10 and the format 6:1.

In this case CT image matrix is 512, due to max. 8300 printable format i.e., 6:1, max 6 images will be printed on each 8300 film. Note that for the Somaris 2 platform a 512 patch must be installed on CT, otherwise the matrix is 1024 and therefore only 4:1 format is possible on 8300 (due to the max printable pixels of 8300).




n Printer=8300, Model=8300 Copper, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u


on Device Setup, HOST KEYPADS: n Kpad=ct, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8300, Film Destination=Processor, Printer1=8300(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=u1_109b.w8u, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=8x10, C=7, D=14 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1



Siemens CT via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


RS23-to-RS42225-to-15 pinConverter Box



Kodak MIM 200

Siemens CT

SPCI

SPDI

Kodak 160 camera

RS422 37-to-50 pinDigital Adaptor Cable

Kpad / Host Control Octopus Adaptor Cable

Fiber Cable

25-to-25 NullModem Cable

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM 200 v6.1, KELI 160 v5.2 Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File Kodak XLP n on Siemens CT to set Density and Contrast for the Camera:

into Exposure->Job Controller: press Stop into System->Camera: set Density=280 (i.e., Dmax), LUT=3 (i.e., Curve Shape=3.0)

Contrast=500 (i.e., Film Contrast=0) and press Set Parameters into Exposure->Job Controller: press Continue

MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON

i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network:


n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Somatom Power: n Board/Channel=Digital Board 1 Channel 1, Logical Name=siemct, n Mod.Name=ct, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off

n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8

n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd

n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On



n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:

n into Machine Setup Menu set: Tonescaling=CurveShape n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup:

n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=2.80, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On









Kodak MIM 200

Siemens CT

SPCI

SPDI

Kodak 2180 camera



Fiber Cable


Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File Kodak XLP n on Siemens CT to set Density and Contrast for the Camera:









n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:


n Select Destination=KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:










Kodak MIM 200

Siemens CT

SPCI

SPDI

Kodak 1120 camera



Fiber Cable


Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File Kodak XLP n on Siemens CT to set Density and Contrast for the Camera:









n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:












Kodak MIM 200

Siemens CT

SPCI

SPDI


Fiber Cable


Fiber Cable

3M 8700 DryView


25cm=10inch Extension(not mandatory) Cable +Kpad / Host Control Octopus Adaptor Cable

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for MIM 200 v5.0.1, v5.2, v6.0 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations and if HQ by installing HQ into Siemens Camera Config.File. Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera:




i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Somatom Power:

n Board/Channel=Digital Board 1 Channel 1, Logical Name=sct, n Mod.Name=sct, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off


n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=13, Interpolation Smooth=13



n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=13, Film Contrast=8 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=B3c5ax4.w87, Auto Study=Off, Console=On, Annotation=Off









Kodak MIM 200

Siemens CT

SPCI

SPDI


25cm=10inch Extension(not mandatory) Cable +Kpad / Host Control Octopus Adaptor Cable25-to-25 Null

Modem Cable COPCIL BoardCopper Cable

Control 9-pin

Data 37 pin

Kodak DryView 8100

RS4229-pole Plug

Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for MIM 200 v5.0.1, v5.2, v6.0 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File DRYVIEW (if not available HQ) n on Siemens CT to set Density and Contrast for the Camera:




i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Somatom Power: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sct, n Mod.Name=sct, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=13, Interpolation Smooth=13 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:

n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even



n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=13, Film Contrast=8 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=B3c5ax4.w87, Auto Study=Off, Console=On, Annotation=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even








Kodak MIM 200

Siemens CT

SPCI

SPDI


25-to-25 NullModem Cable COPCIL Board

Copper Cable

Control 9-pin

Data 37 pin

Kodak DryView 8300


Requirements: CT series from Somatom Plus till Somatom Plus 4 (i.e., Somaris 2,3,4) Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for MIM 200 v5.0.1, v5.2, v6.0 Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT. CT Setup: n on Siemens CT install Camera Config.File HQ n on Siemens CT select on Exposure->Settings the film size 8x10 and the format 6:1 n on Siemens CT to set Density and Contrast for the Camera:




i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Somatom Power: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sct, n Mod.Name=sct, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=0, Interpolation Smooth=0 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue



n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8300, Media Size Select=8x10in n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=0, Film Contrast=7 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=u1_109b.w8u, Auto Study=Off, Console=On, Annotation=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1 on 1=Portrait n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1





Requirements: CT series from Somatom Plus till Somatom Plus 4 (ie Somaris 2,3,4) Requirements: MIM200 v6.1 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on some old CT, if you want to configure a new camera because you are replacing an existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera, i.e., on Siemens CT configure CT with camera=None, boot CT like this, and then install the new camera, i.e., on Siemens CT configure CT with, e.g., camera=3M 959 and reboot CT CT Setup: n on Siemens CT install Camera Config.File Kodak 2180 (or XLP) n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=280 (ie Dmax),

LUT=3 (ie Curve Shape=3.0) Contrast=500 (ie Film Contrast=0) and press Set Parameters

into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON

ie delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.= Somatom Power:

n Board/Channel=Digital Board 1 Channel 1, Logical Name= sct, n Mod.Name=sct, Primary Control: Type= Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off


n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1

n on Configure, Destination, Add, Print, Network, Qualified, 8900, Set:




Kodak MIM 200

Siemens CT

SPCI

SPDI



Kodak DryView 8900


DICOM Network



n General: Log.Name=8900, IPAddr=accordingly n General: Database=8900, Model=8900, Memory=32 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040,AETitle=NER_8900,Counter=40,Response=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.3 n SCU: Luminance Space= On, Variable Border Density=On n SCU: Curve Shape=On, Perception LUT =On, PLUT Service=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8900, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=13, Film Contrast=8 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=B3c5ax4.w87, Auto Study=Off, Console=On, Annotation=Off

8900 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any



n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= B3c5ax4.w87 (Always=Y) n Contrast= 8 (Always=Y), Smoothing Type=13 (Always=Y) n Dmin=0.00 (Always=N), Dmax= 3.00 (Always=Y) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ct



Siemens CT via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens CTSomaris 4 platform- AR Star (not ART)- Plus 4 seriesSomaris 45 platform- Emotion / Balance / Esprit

Kodak DryView 8300

DICOM Network

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: 8300 DICOM parameters: port=104, AE title=IMN_8300. Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera

in this case use Dmax=300, C=10, Modality Group=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera

in this case use Dmax=300, C=1, Modality Group=4 CT Setup: n on CT into System/Config/Network declare camera IP Addr, AE Title, Port n on CT into System/Config/Camera/Details set:

Filmsize=8x10, Orient.=Portrait, Division=e.g., STANDARD 3x2 Add, MaxD=300 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT or LUT_022 (i.e., Image lutted by CT, linear LUT in Camera)

n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=a) 10 or b) 1, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set: Modality Group=a) 0 or b) 4



Siemens CT via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Siemens CTSomaris 4 platform- ARStar (not ART)- Plus 4 seriesSomaris 45 platform- Emotion / Balance / Esprit

DICOM Network

Kodak 190 camera

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: 190 rel. 1.7.29 Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 (use a) configuration in case also a Virtuoso workstation is printing on same camera) b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 CT Setup: n on CT into System/Config/Network declare for the camera:

Basic Print, Host Name, Log.Name, IP Addr, Port, AE Title, SUN, Online n on CT into System/Config/Camera/Details set:

Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (i.e., Image lutted by CT, linear LUT in Camera)

n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=2.80, Curve Shape=a) 3.0 or b) 0.0, Contrast=0 n Contrast Pivot Density=1.2, IPAddress=accordingly n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Siemens CT via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /




DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable


Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: 9410 v1.6, 8700 v1.26 Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers. Note: CT AE Title ends with last 4 digits DBPR (not 0000) e.g., 049SA1CTXYDBPR. Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=8, TFT=B3C5 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera:


Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=a) 300 or b) 280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT or CTdry (i.e., Image lutted by CT, linear LUT in Camera)

n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) 9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0



n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87 on Device Setup, SCP PRINTERS, Current Providers:

n Printer=8700, AE Title=IMN_9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=e.g., 049SA1CTXYDBPR, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 8 or b) 3 n TFT/ULUT=a) b3c5.w87 or b) Wrkstn2a.w87 n Max.Density=a) 300 or b) 280, Border=0, Mag.Type=8, Smoothing=13 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60





Siemens CTSomaris 4 platform- AR Star (not ART)- Plus 4 seriesSomaris 45 platform- Emotion / Balance / Esprit


DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: 9410 v1.6, 8100 v2.1.2 Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: CT AE Title ends with last 4 digits DBPR (not 0000) e.g., 049SA1CTXYDBPR Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=8, TFT=B3C5 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=1, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera:


Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=a) 300 or b) 280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT or CTdry (i.e., Image lutted by CT, linear LUT in Camera)


on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interp.Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

on Device Setup, SCP PRINTERS, Current Providers: n Printer=8100, AE Title=IMN_9410, Port=1024, Max Associations=5

on Device Setup, SCP PRINTERS, Registered Users:



n SCU AETitle=e.g., 049SA1CTXYDBPR, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=a) 8 or b) 1 n TFT/ULUT=a) b3c5.w87 or b) Wrkstn2a.w87 n Max.Density=a) 300 or b) 280, Border Density=0, Mag.Type=8, Smoothing=13 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 9410 v1.3.1a and v1.5.1 Note: CT AE Title ends with last 4 digits DBPR (not 0000) e.g., 049SA1CTXYDBPR. Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=10, Modality group=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, Modality group=4 CT Setup: n on CT into System/Config/Network declare for the camera:


Filmsize=8x10, Orient.=Portrait, Division=e.g., STANDARD 3x2 Add, Max Density=300 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT or LUT_022 (i.e., Image lutted by CT, linear LUT in Camera)



on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=IMN_9410, Port=1024, Max Associations=5




n SCU AETitle=e.g., 049SA1CTXYDBPR, IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 10 or b) 1, n TFT/ULUT=a) u1_109b.w8u or b) wrkstn83a.w8u n Max.Density=300, Border=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




Siemens CT via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, KELI 160 v5.2 Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=280, Curve Shape=434 (i.e., 3.0), Film Contrast=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 CT Setup: n on CT into System/Config/Network declare for the camera:



n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On



n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off 160 Setup: no modality-specific setup needed



Siemens CT via DICOM with PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200 Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 CT Setup: n on CT into System/Config/Network declare for the camera:






n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation= Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200 Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 1120 v2.40/032 Note: This setup is basically also valid for MIM 200 v3.2.1, v4.0, v5.0, v5.2, v6.0 Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 CT Setup: n on CT into System/Config/Network declare for the camera:






n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue)



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7








Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for MIM 200 v4.0, v5.0, v5.2, v6.0 Note: This setup is basically also valid for 25 PS computer Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=280, C=8, TFT=B3C5AX4 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera:



n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear)



n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +8 or b) +3 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=13 (Always=N), Border=3.99 (Always=N), n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off








DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for MIM 200 v5.0, v5.2, v6.0 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination. Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=8, TFT=B3C5AX4 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera:


Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=a) 300 or b) 280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (i.e., Image lutted by CT, linear LUT in Camera)

n on CT into Exposure/Settings set Graduation=smt (i.e., smooth)






n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 8 or b) 3 (Always=Y) n ImageDmin=0.00(Always=N),ImageDmax=a)3.00 or b)2.80(Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=13 (Always=N), Border=3.99 (Always=N), n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off

8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for MIM 200 v5.0, v5.2, v6.0 Note: This setup is basically also valid for 25 PS computer Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=8, TFT=B3C5AX4 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=280, C=1, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera:


Filmsize=14x17, Orient.=Portrait, Division=e.g., STANDARD 5x4 Add, Max Density=a) 300 or b) 280 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (i.e., Image lutted by CT, linear LUT in Camera)

n on CT into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:






n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 8 or b) 3 (Always=Y) n ImageDmin=0.00(Always=N),ImageDmax=a)3.00 or b)2.80(Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=13 (Always=N), Border=3.99 (Always=N), n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off







Siemens CTSomaris 4 platform- ARStar (not ART)- Plus 4 seriesSomaris 45 platform- Emotion / Balance/Esprit


DICOM Network

Control 9 pin

Data 37 pin


Requirements: CT AR VB41A, CT Plus 4 VB40A, CT Balance/Emotion/Esprit VA10A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for MIM 200 v5.0, v5.2, v6.0 Note: This setup is basically also valid for 25 PS computer Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT a) if LUT=linear then Image Data not lutted by CT, lutted by Camera in this case use Dmax=300, C=10, Modality group=0 b) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, Modality group=4 CT Setup: n on CT into System/Config/Network declare for the camera:


Filmsize=8x10, Orient.=Portrait, Division=e.g., STANDARD 3x2 Add, Max Density=300 a) LUT=linear (i.e., Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT or LUT_022 (i.e., Image lutted by CT, linear LUT in Camera)




n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) u1_109b.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 10 or b) 1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N), Border=3.99 (Always=N), n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off





Requirements: CT AR VB41A, CT Plus 4 VB40A Requirements: CT Balance/Emotion/Esprit VA10A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT c) if LUT=linear then Image Data not lutted by CT, lutted by Camera

in this case use Dmax=300, C=8, TFT=B3C5AX4 d) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera

in this case use Dmax=280, C=3, TFT=WRKSTN2A CT Setup: n on CT into System/Config/Network declare for the camera:


Filmsize=14x17, Orient.=Portrait, Division=eg STANDARD 5x4 Add, Max Density=a) 300 or b) 280 a) LUT=linear (ie Image Data not lutted by CT, lutted by Camera) b) LUT=CTLUT (ie Image lutted by CT, linear LUT in Camera)

n on CT into Exposure/Settings set Graduation=smt (ie smooth) 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:



n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On


DICOM Network

Kodak DryView 8900



n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 8 or b) 3 (Always=Y), Smoothing Type=13 (Always=N) n Dmin=0.00 (Always=N), Dmax= a)3.00 or b)2.80 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ct




Requirements: CT AR VB41A, CT Plus 4 VB40A Requirements: CT Balance/Emotion/Esprit VA10A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT e) if LUT=linear then Image Data not lutted by CT, lutted by Camera

in this case use Dmax=300, C=8, TFT=B3C5AX4 f) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera




n on CT into Exposure/Settings set Graduation=smt (ie smooth) 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On


DICOM Network

Kodak DryView 8150




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name= a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 8 or b) 1 (Always=Y), Smoothing Type=13 (Always=N) n Dmin=0.00 (Always=N), Dmax=a)3.00 or b)2.80 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ct



Siemens CT via DICOM with Kodak Color Medical Imager 1000

Requirements: CT AR VB41A, CT Plus 4 VB40A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Siemens CT could be configured with a) LUT=linear or b) LUT=CTLUT g) if LUT=linear then Image Data not lutted by CT, lutted by Camera

in this case use Dmax=300, C=8, TFT=B3C5AX4 h) if LUT=CTLUT then Image Data lutted by CT, linear-in-Density LUT into Camera




n on CT into Exposure/Settings set Graduation=smt (ie smooth) CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)



n Contrast=a) 8 or b) 7 (Always=Y)

DICOM Network

Kodak CMI 1000

Siemens CTSomaris 4 platform- ARStar (not ART)- Plus 4 series



n TFT Set (From list)=a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=13 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Siemens CT platform Somaris 5, based on syngo with LASER IMAGER Products


Setup for Siemens CT Volume Zoom / Access / Balance / Emotion / Esprit / Sensation / Smile / Spirit with LASER IMAGERS Important note: from beg. 2001 CT models Balance/Emotion/Esprit switched to the Somaris 5 syngo-based platform (see here below). Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /














Siemens CT syngo platform via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens CTSomaris 5 syngo platform- Volume Zoom / Access- Emotion / Balance / Esprit- Sensation- Smile

Kodak DryView 8300

DICOM Network

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00

if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=10, Modality Group=0

b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4

syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=104 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,


n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT (or CTLUTdry), Max Density=a) 3.00 or b) 2.80

8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=a) 10 or b) 1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set: Modality Group=a) 0 or b) 4



Siemens CT syngo platform via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=2.80 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 (use a) config. in case also a Virtuoso workstation is printing on same camera) b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190,


n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT, Max Density=2.80

190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=2.80, Curve Shape=a) 3.0 or b) 0.0, Contrast=0 n Contrast Pivot Density=1.2, IPAddress=accordingly n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Siemens CT syngo platform via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /




DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable


Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers and if HQ by installing HQ into syngo DICOM Camera Config.File

Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=9410, Port=1024 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700,



9410 Setup:





on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 9 or b) 3 n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 n Max.Density=a) 300 or b) 280, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 9410 v1.6, 8100 v2.4.1

Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=1, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100,



9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831



n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=a) 9 or b) 1 n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 n Max.Density=a) 300 or b) 280, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=10, Modality Group=0 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=9410, Port=1024 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,




n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0



n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u n on Device Setup, SCP PRINTERS, Current Providers: n Printer=8300, AE Title=9410, Port=1024, Max Associations=5 n on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 10 or b) 1 n TFT/ULUT=a) u1_109b.w8u or b) wrkstn83a.w8u n Max.Density=a) 300 or b) 280, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




Siemens CT syngo platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=2.80 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=280, Curve Shape=434 (i.e., 3.0), Film Contrast=0 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k160, Host Sel.=k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160,


n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT, Max Density=2.80 SC Image=a) linear or b) CTLUT, Max Density=2.80





n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=2.80 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k2180, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k2180, Host Sel.=k2180, AE Title=2180, Port=5040 press button Save and then press button Verification step 3: HC Device=k2180, Type=DICOM Printer, Class=kodak2180,




n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9






DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=2.80 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=280, Curve Shape=3.0, Film Contrast=0 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, Curve Shape=0.0, Film Contrast=0 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120,










Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=2.80 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=280, C=8, TFT=B3C5AX4 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k8200, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8200, Host Sel.=k8200, AE Title=8200, Port=5040 press button Save and then press button Verification step 3: HC Device=k8200, Type=DICOM Printer, Class=kodak8200,


n into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT (or CTLUTdry), Max Density=2.80



n on Configure, Input, Network, Add:




n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) B3c5ax4.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +8 or b) +3 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination and if HQ by installing HQ into Siemens CT DICOM Camera Config.File

Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700,








n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 3 (Always=Y) n Dmin=0.00 (Always=N), Dmax=a) 3.00 or b) 2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=1, TFT=WRKSTN2A syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8100, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8100, Host Sel.=dv8100, AE Title=8100, Port=5040 press button Save and then press button Test step 3: HC Device=dv8100, Type=DICOM Printer, Class=imation8100,








n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 1 (Always=Y) n Image Dmin=0.00 (Always=N) n Image Dmax=a) 3.00 or b) 2.80 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off









DICOM Network

Control 9 pin

Data 37 pin


Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT a) into Local Service/Config/DICOM LUT files set CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use D=16, C=10, Modality Group=0 b) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4 syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8300, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8300, Host Sel.=dv8300, AE Title=8300, Port=5040 press button Save and then press button Test step 3: HC Device=dv8300, Type=DICOM Printer, Class=imation8300,









n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) u1_109b.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 10 or b) 1 (Always=N) n Image Dmin=0.00 (Always=N) n Image Dmax=a) 300 or b) 280 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Film Output Dest=Bin 9 (Always=N)





Requirements: CT Zoom/Access VA20A, CT Balance/Emotion/Esprit VA30A Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40A Requirements: CT Sensation VA50A/VA60A/VA70A/VB10A, CT Smile VA10A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT c) into Local Service/Config/DICOM LUT files set

CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K

d) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=3, TFT= WRKSTN2A

syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8900, Host Sel.=dv8900, AE Title=8900, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8900, Type=DICOM Printer, Class=kodak8900_smallB


- into Local Service/Config/DICOM LUT files set CT Image=a) linear or b) CTLUT, Max Density=a) 3.00 or b) 2.80

8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly


DICOM Network

Kodak DryView 8900



n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 9 or b) 3 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax= a) 3.00 or b) 2.80 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ct




Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40C/VA47A Requirements: CT Sensation VA50A/VA60A/VA70A/VB19C, Smile VA10A Requirements: CT Sensation/Emotion VB10B Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT e) into Local Service/Config/DICOM LUT files set

CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB

f) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=1, TFT= WRKSTN2A

syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150,Type=DICOM Printer, Class=kodak8150(or kodak8200),



8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly


DICOM Network

Kodak DryView 8150





n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 9 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=a) 3.00 or b) 2.80 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ct



Siemens CT syngo platform via DICOM with Kodak Color Medical Imager 1000

Requirements: CT Zoom/Access/Balance/Emotion/Esprit VA40C/VA47A Requirements: CT Sensation VA50A/VA60A/VA70A/VB19C, Smile VA10A Requirements: CT Sensation/Emotion/Spirit VB10B/VB20A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=CTLUT g) into Local Service/Config/DICOM LUT files set

CT Image=linear , MaxDens=3.00 if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K

h) into Local Service/Config/DICOM LUT files set CT Image=CTLUT, MaxDens=2.80 if LUT=CTLUT then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=280, C=7, TFT= WRKSTN2A

syngo Setup: - into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=cmi1000, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=ek1000, Host Sel.=cmi1000, AE Title=CMI1000, Port=5040 press button Save and then press button Test step 3: HC Device=kodak1000, Type=DICOM Printer,



CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y):

DICOM Network

Kodak CMI 1000

Siemens CTSomaris 5 syngo platform- Volume Zoom / Access- Emotion / Balance / Esprit- Sensation- Smile / Spirit



at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)



n Contrast=a) 9 or b) 7 (Always=Y) n TFT Set (From list)=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Siemens DR model FD Thorax / Multix / Vertix / Aristos with LASER IMAGER Products


Setup for Siemens DR FD Thorax / Multix / Vertix / Aristos with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) .................................... 4

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER......................................................................... 6


n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER .......................................................................... 10

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ....................................................................... 12


n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (3,4,5) / Kodak DryView 8200 LASER IMAGER......................................................................... 16








Siemens FD via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens FD Flat DetectorThorax / MultixRADIS syngo platform

Kodak DryView 8300

DICOM Network

Requirements: FD syngo platform VA20K Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00


b) into Local Service/Config/DICOM LUT files set set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4



n into Local Service/Config/DICOM LUT files set: CR Image=a) linear or b) CR, Max Density=3.00




Siemens FD via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: FD syngo platform VA20K Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00

if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0

b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0

syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k190, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k190, Host Sel.=k190, AE Title=190, Port=5040 press button Save and then press button Verification step 3: HC Device=k190, Type=DICOM Printer, Class=kodak190,



190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=a) 3.0 or b) 0.0, Contrast=0, n Contrast Pivot Density=1.2, IPAddress=accordingly, n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Siemens FD via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: FD syngo platform VA20K Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,


Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00

if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=4, TFT=SIEFL87B

b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A







n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 4 or b) 2 n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: FD syngo platform VA20K Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00


b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A




9410 Setup:





on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=a) 4 or b) 2 n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin

COPCIL boardCopper Cable

Requirements: FD syngo platform VA20K Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear, MaxDens=3.00





n into Local Service/Config/DICOM LUT files set CR Image=a) linear or b) CR, Max Density=3.00






n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 4 or b) 1 n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




Siemens FD via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00

if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, Curve Shape=434 (i.e., 3.0), Film Contrast=0




n into Local Service/Config/DICOM LUT files set : CR Image=a) linear or b) CR, Max Density=3.00



n General: Log.Name=KELI 160, IPAddr=100.100.100.30,



n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7








DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00








n General: Log.Name=KELP2180, Database Name=KELP 2180



n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Modality=OT (Always=N) n Border=3.99 (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00



syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120,








n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off







Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00









n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40,



n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +4 or b) +2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off








DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,


Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00


b) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A

syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8700, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8700, Host Sel.=dv8700, AE Title=8700, Port=5040 press button Save and then press button Verification step 3: HC Device=dv8700, Type=DICOM Printer, Class=imation8700,



MIM200 Setup:



n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:



n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 4 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off








DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00











n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 4 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Negotiate Color Print=Off








Kodak DryView 8300

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin


Requirements: FD syngo platform VA20K Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=CR a) into Local Service/Config/DICOM LUT files set CR Image=linear, MaxDens=3.00









n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set:



n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 4 or b) 1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off





Requirements: FD syngo platform VA20K Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=CR c) into Local Service/Config/DICOM LUT files set CR Image=linear, MaxDens=3.00


d) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A



- into Local Service/Config/DICOM LUT files set CR Image=a) linear or b) CR, Max Density=3.00



n General: Log.Name=8900

DICOM Network

Kodak DryView 8900

Siemens Flat DetectorFD Image SystemRADIS syngo platform-Thorax / Multix / Vertix- Axiom Aristos



n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any


n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 4 or b) 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=fd




Requirements: FD syngo platform VA20K Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=CR e) into Local Service/Config/DICOM LUT files set CR Image=linear , MaxDens=3.00


f) into Local Service/Config/DICOM LUT files set CR Image=CR, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, TFT=WRKSTN2A






n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any

DICOM Network

Kodak DryView 8150




n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 4 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=fd



Siemens FD via DICOM with Kodak Color Medical Imager 1000

Requirements: FD platform Syngo VA20K Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=CR g) into Local Service/Config/DICOM LUT files set CR Image=linear


h) into Local Service/Config/DICOM LUT files set CR Image=CR if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=7, TFT=WRKSTN2A




CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000

DICOM Network

Kodak CMI 1000




n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)



n Contrast=a) 4 or b) 7 (Always=Y) n TFT Set (From list)=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Siemens DSA Axiom Artis with LASER IMAGER Products


Setup for Siemens DSA Axiom Artis with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /














Axiom Artis via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens Axiom Artissyngo platform

Kodak DryView 8300

DICOM Network

Requirements: Axiom Artis syngo platform VA10B Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00


b) into Local Service/Config/DICOM LUT files set set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4



n into Local Service/Config/DICOM LUT files set: XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00




Axiom Artis via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Siemens Axiom Artis syngo platform

DICOM Network

Kodak 190 camera

Requirements: Axiom Artis syngo platform VA10B Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00


b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0



n into Local Service/Config/DICOM LUT files set : XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00




Axiom Artis via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: Axiom Artis syngo platform VA10B Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras


Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00


b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A




9410 Setup:





on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 4 or b) 2 n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Axiom Artis syngo platform VA10B Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00


b) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=xa then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A




9410 Setup:







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Axiom Artis syngo platform VA10B Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00







n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831



n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u






Axiom Artis via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00











n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off







Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 2180 camera

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00













Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 1120 camera

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00



syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120,










Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00









n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +4 or b) +2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025







DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination and if HQ by installing HQ into syngo DICOM Camera Config.File






n into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00






n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 4 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00










n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7









Kodak DryView 8300

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin


Requirements: Axiom Artis syngo platform VA10B Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00












n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 4 or b) 1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off





Requirements: Axiom Artis syngo platform VA10B Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=xa c) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00


d) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A



- into Local Service/Config/DICOM LUT files set XA Image=a) linear or b) xa, Max Density=3.00 XRF Image=a) linear or b) xrf, Max Density=3.00 XABiPlane Image=a) linear or b) xabipl, Max Density=3.00


n Port=5040, Association Limit=12, Source Name=DICOM


DICOM Network

Kodak DryView 8900





n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 4 or b) 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=artis




Requirements: Axiom Artis syngo platform VB11 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=xa e) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00


f) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, TFT=WRKSTN2A







DICOM Network

Kodak DryView 8150



n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 4 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=artis



Axiom Artis via DICOM with Kodak Color Medical Imager 1000

Requirements: Axiom Artis syngo platform VB11 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=xa g) into Local Service/Config/DICOM LUT files set XA Image=linear


h) into Local Service/Config/DICOM LUT files set XA Image=xa if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=7, TFT=WRKSTN2A




CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly

DICOM Network

Kodak CMI 1000




n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)






Siemens DSA Fluorospot Compact with LASER IMAGER Products


Setup for Siemens DSA Fluorospot Compact with LASER IMAGERS (note: different models of Iconos, Siregraph, Sireskop could have either the setup of Fluorospot TOP or the setup of Fluorospot Compact) Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER /



Kodak DryView 8300 LASER IMAGER / Dual Printer.................................................. 9 n Kodak DryView 8300 LASER IMAGER / Standalone.................................................... 10 n Kodak Digital Science 969 HQ LASER IMAGER...................................................... 11 n Kodak Digital Science 969 HQT LASER IMAGER ................................................... 12 n Kodak Digital Science 959 XL LASER IMAGER ...................................................... 13 n Kodak DryView 8100 LASER IMAGER......................................................................... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /






n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4) ............................... 25

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4).................................................................... 27




Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 29 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 30 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /







n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................43







Siemens Fluorospot Compact with Kodak DryView 8800 MULTI-INPUT MANAGER /


DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB

Keypad

SPDI

Keypad


SiemensFluorospot Compact

8700 DualFiber Cable

3M 8700 DryView

3M8800Multi-Input Manager

Video Cable for FootswitchFootswitch

Requirements: Fluoro Compact rel. VA01A, 8800 rel. 5.1, 8700 rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8800/8700 Dual Setup: n on COMM Menu:

n 969 Default n on IMAGE Menu:

n TFT=SIEFL87B, Dmax=3.00, Contrast=4, Density=14 n on EIB Menu:

n Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200



Siemens Fluorospot Compact with Kodak DryView 8700 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB

Keypad

SPDI

Keypad



8700 Plus

3M 8700 DryView


Requirements: Siemens Fluoro Compact rel. VA01A, 8700 Plus rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8700 Plus Setup: n on COMM Menu:


n TFT=SIEFL87B, Dmax=3.00, Contrast=4, Density=14 n on SYSTEM Menu:





Siemens Fluorospot Compact with Kodak DryView 8700 LASER IMAGER / Standard

Video cable for Footswitch

Keypad

SPDI



8700 Standard

3M 8700 DryView

Requirements: Fluorospot Compact rel. VA01A, 8700 Standard rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. 8700 Standard Setup: n on TDB/C board:

n Jumpers=RS422, Switch=Left n on COMM Menu:

n 8700 Keypad Default n on IMAGE Menu:

n TFT=SIEFL87B, Dmax=3.00, Contrast=4, Density=14 n on SYSTEM Menu:







DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB

Keypad

SPDI

Keypad




3M 8700 DryView



Requirements: Fluoro Compact rel. VA01A, 8800 rel. 5.1, 8500 rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8800/8500 Dual Setup: n on COMM Menu:


n TFT=SIEFC969 (or SIEFL87B), Dmax=3.00, Contrast=2, Density=14 n on EIB Menu:




Siemens Fluorospot Compact with Kodak DryView 8500 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB

Keypad

SPDI

Keypad



8500 Plus

3M 8700 DryView

FootswitchVideo cable for Footswitch

Requirements: Fluorospot Compact rel. VA01A, 8500 Plus rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8500 Plus Setup: n on COMM Menu:


n TFT=SIEFC969 (or SIEFL87B), Dmax=3.00, Contrast=2, Density=14 n on SYSTEM Menu:


n Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200 n on KEYPAD Menu:

n Smooth Beta=2



Siemens Fluorospot Compact with Kodak DryView 8500 LASER IMAGER / Standard


Keypad

SPDI



8500 Standard

3M 8700 DryView

Requirements: Fluoro Compact rel. VA01A, 8500 Standard rel. 1.22 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8500 Standard Setup: n on TDB/C board:



n TFT=SIEFC969 (or SIEFL87B), Dmax=3.00, Contrast=2, Density=14 n on SYSTEM Menu:







8300 Dual

DEIB

Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM

POEIB37-pin Digital Cable


UKEIB

Keypad

SPDI

Keypad



3M8800M ulti-Input Manager

FootswitchVideo Cable for Footswitch

Requirements: Fluoro Compact rel. VA01A, 8800 rel. 5.1, 8300 rel. 4.4 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8300 Setup: n on 8300 Operator Menu set:

n Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set:

n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Protocol=3M

n Digital Interface: Parity=None n Modality Group=2

8800 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: Density=15, Contrast=4 n on EIB Menu: Parity=Enable Even, Timeout=30, T6=255, T7=200, T10=200



Siemens Fluorospot Compact with Kodak DryView 8300 LASER IMAGER / Standalone

Keypad

SPDI


SiemensFluorospot Compact 8300

Video Cable for Footswitch

Requirements: Siemens Fluorospot Compact rel. VA01A, 8300 rel. 4.4 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. 8300 Setup: n on 8300 Operator Menu set:

n Density=15 n Contrast=4 n Film Layout : Format=1on 1, Mode=Portrait

n on 8300 Service Menu set: n Serial Control Interface: Protocol=Keypad n Digital Interface: Parity=Even n Modality Group=2



Siemens Fluorospot Compact with Kodak Digital Science 969 HQ LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M969 HQ

UKEIB

Keypad

SPDI

Keypad





Requirements: Fluorospot Compact rel. VA01A, M969 HQ rel. 5.1 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON M969 HQ Setup: n on COMM Menu:


n TFT=SIEFC969 (or SIEFL87B), Dmax=3.00, Contrast=4, Density=14 n on EIB Menu:




Siemens Fluorospot Compact with Kodak Digital Science 969 HQT LASER IMAGER

M969 HQT

Keypad

SPDI





Requirements: Fluorospot Compact rel. VA01A, M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0. Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. M969 HQT Setup: n on TDB/C board:


n 8700 Keypad Default n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry)

n TFT=PMS, Contrast=15, Density=7, on OIC Menu: Chemistry=2 n on SYSTEM Menu:





Siemens Fluorospot Compact with Kodak Digital Science 959 XL LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M959 XL

KEIB

XL Keypad

SPDI

Keypad




Footswitch


Requirements: Fluorospot Compact rel. VA01A, M959 XL rel. 3.8 Note: a footswitch possibility is available with VA01A Fluoro Compact sw release. Setup: n on XL Control Panel set Density & Contrast depending on chemistry n on KEIB set Jumper=RS422 n on XL Input Module install LUT 322A0 M959 XL Setup: n on COMM Menu:

n 959 Default n on EIB Menu:




Siemens Fluorospot Compact with Kodak DryView 8100 LASER IMAGER

Copper Cable

UKEIB

Keypad

SPDI

Keypad



DryView 8100

Imager

RS422 9-pole Plug

Requirements: Fluoro Compact version 3 rel. VC00C, 8100 v2.4.1 Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=2, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=75, Transmission rate=0 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=30, P1,…,P6=0

n on IMAGE QLTY-> Pixel Correct=On, 952 Override=2 n on IMAGE QUALITY-> TFT FILES Menu: TFT=SIEFL87B n on LOCAL PANEL Menu: Contrast=4, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Even, Timeout=60



Fluorospot Compact via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual, and HQ)

DPCCopper Cable

DPI4 Cable

UKEIB

Keypad

SPDI

Keypad


Siemens Fluorospot Compact


3M 8700 DryView

Fiber Cable

Fiber Cable

DPC-to-UKEIB Cable


Requirements: Fluoro Compact version 3 rel. VC00C, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers.

Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=SuperSet n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87



on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=30, Parity=Even, Memory=7 n Serial Port: Protocol=SuperSet, Parity=None, Baud Rate=19200

on Device Setup, IMS KEYPADS: n Kpad=flc, Hosp=sms, Serial Port=DPI4 A KPAD, Image Card=DPI4 A DATA n Available Printers=8700, Film Destination=Processor, TFT/ULUT=Siefl87b.w87 n into Defaults: Dest=8700, Size=14x17, C=4, D=14, Dmax=3.0, Bit=8 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60





DPCCopper Cable

DPI4 Cable

UKEIB

Keypad

SPDI

Keypad



Kodak DryView 8100

Control 9-pin

Data 37 pin

DPC-to-UKEIB Cable



RS4229-pole Plug

Requirements: Fluoro Compact version 3 rel. VC00C, 9410 v1.6, 8100 v2.4.1 Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 9410 Setup:


on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=30, Parity=Even, Memory=7 n Serial Port: Protocol=SuperSet, Parity=None, Baud Rate=19200

on Device Setup, IMS KEYPADS: n Kpad=flc, Hosp=sms, Serial Port=DPI4 A KPAD, Image Card=DPI4 A DATA n Available Printers=8100, Film Destination=Processor, TFT/ULUT=Siefl87b.w87 n into Defaults: Dest=8100, Size=14x17, C=4, D=14, Dmax=3.0, Bit=8



Fluorospot Compact with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200


SPDI

Kodak 160 camera




Keypad

Requirements: Fluorospot Compact rel. VB00A Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 MIM200 Setup: n on Configure, Network:


n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot Compact DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=flc, n Primary Control Type=Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off


n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0



n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELI 160, Media Size Select=35x43

n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=4.0, Auto Study=Off, Console=On

n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape







Kodak MIM 200


SPDI

Kodak 2180 camera



Keypad

Fiber Cable

Requirements: Fluorospot Compact rel. VB00A Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 MIM200 Setup: n on Configure, Network:




n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On



n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 2180, Media Size Select=35x43









Kodak MIM 200


SPDI

Kodak 1120 camera



Keypad

Fiber Cable

Requirements: Fluorospot Compact VB00A Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 MIM200 Setup: n on Configure, Network:




n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On



n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELP 1120, Media Size Select=35x43








Keypad


Kodak MIM 200


Fiber Cable

Fiber Cable

3M8700DryView


SPDI



Requirements: Fluoro Compact version 3 rel. VC00C Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations.

Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot Compact DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=flc, n Primary Control Type=Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=880, Lines=880, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On



n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=4 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Siefl87b.w87, Auto Study=Off, Console=On, Annotation=Off






Keypad


Kodak MIM 200



Control 9-pin

Data 37 pin

RS4229-pole Plug

Kodak DryView 8100

SPDI



Requirements: Fluoro Compact version 3 rel. VC00C Requirements: MIM200 v6.1, 8100 v2.4.1 Note: a footswitch possibility is available. Fluorospot Compact Setup: n into Set, Service icon, password, select: Spdi Settings n set: Request Timeout=5, Manual=Yes (note: if footswitch available then Manual=No) n Parity=Even, LUT=No, Auto Mode=85, Transmission rate=0 MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot Compact DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=flc, n Primary Control Type=Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=880, Lines=880, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:

n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On




n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=4 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Siefl87b.w87, Auto Study=Off, Console=On, Annotation=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0




Fluorospot Compact via DICOM with Kodak DryView 8300 LASER IMAGER


DryView 8300

DICOM Network

Requirements: Fluorospot Compact rel. VD10A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=DV8300 and in Network Settings set: n AET=IMN_8300, Host name=DV8300, IPAddr=accordingly, Port=104 n Create New and set: Camera=Imation_gen n set: Size=8INx10IN, Format=1x1,1x2,2x2 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 8300 Setup: n on 8300 Operator Menu into Configure User set:


n Modality Group=2



Fluorospot Compact via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: Fluorospot Compact rel. VD10A Requirements: 190 rel. 1.7.29 Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K190 and in Network Settings set: n AET=190, Host name=K190, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45






8700 Plus

9410 PACS Link

DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: Fluorospot Compact rel. VD10A, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers

Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=DV8700 and in Network Settings set: n AET=9410, Host name=DV8700, IPAddr=accordingly, Port=1024 n Create New and set: Camera=Imation_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 9410 Setup: n on Device Setup, LOCAL PRINTERS:








DryView 81009410 PACS Link

DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Fluorospot Compact rel. VD10A, 9410 v1.6, 8100 v2.4.1 Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=DV8100 and in Network Settings set: n AET=9410, Host name=DV8100, IPAddr=accordingly, Port=1024 n Create New and set: Camera=Imation_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 9410 Setup:



on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=15, TFT/ULUT=Siefl87b.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down



n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Fluorospot Compact rel. VD10A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=DV8300 and in Network Settings set: n AET=9410, Host name=DV8300, IPAddr=accordingly, Port=1024 n Create New and set: Camera=Imation_gen n set: Size=8INx10IN, Format=1x1,1x2,2x2 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 9410 Setup:



on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=4, TFT/ULUT=693c0.w8u n Max.Density=300, Border=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto



n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1



Fluorospot Compact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, KELI 160 v7.2 Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K160 and in Network Settings set: n AET=160, Host name=K160, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On






DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200 Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 2180 rel. 2.17H Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K2180 and in Network Settings set: n AET=2180, Host name=K2180, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On



n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=4 i.e., 575 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K1120 and in Network Settings set: n AET=1120, Host name=K1120, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On






Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K8200 and in Network Settings set: n AET=8200, Host name=K8200, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On



n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination

Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K8700 and in Network Settings set: n AET=8700, Host name=K8700, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set:

n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On



n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=K8100 and in Network Settings set: n AET=8100, Host name=K8100, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Kodak_gen n set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On



n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Siefl87b.w87 (Always=Y), Contrast (dry)=15 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








Kodak DryView 8300

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin


Requirements: Fluorospot Compact rel. VD10A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Fluorospot Compact Setup: n into Service select: Set, Configuration, Dicom Print Settings n set Alias=DV8300 and in Network Settings set: n AET=8300, Host name=DV8300, IPAddr=accordingly, Port=5040 n Create New and set: Camera=Imation_gen n set: Size=8INx10IN, Format=1x1,1x2,2x2 n set: Own Print AET=e.g., FLC_PRINT_SCU and Retry=0 MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On



n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify:

n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=693c0.w8u (Always=Y), Contrast (dry)=4 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off





Requirements: Fluorospot Compact rel. VD10A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Fluorospot Compact Setup: - into Service select: Set, Configuration, Dicom Print Settings - set Alias=K8900 and in Network Settings set: - AET=8900, Host name=K8900, IPAddr=accordingly, Port=5040 - Create New and set: Camera=Kodak_gen - set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 - set: Own Print AET=eg FLC_PRINT_SCU and Retry=0 8900 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0


DICOM Network

Kodak DryView 8900



n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Siefl87b.w87 (Always=Y) n Contrast= 15 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=flc




Requirements: Fluorospot Compact rel. VD10A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Fluorospot Compact Setup: - into Service select: Set, Configuration, Dicom Print Settings - set Alias=K8150 and in Network Settings set: - AET=DV8150, Host name=K8150, IPAddr=accordingly, Port=5040 - Create New and set: Camera=Kodak_gen - set: Size=14INx17IN, Format=1x1,1x2,2x2,2x3,3x3,3x4,3x5,4x4,4x5 - set: Own Print AET=eg FLC_PRINT_SCU and Retry=0 8150 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2


DICOM Network

Kodak DryView 8150



n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:

n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name= Siefl87b.w87 (Always=Y) n Contrast=15 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=flc



Fluorospot Compact via DICOM with Kodak Color Medical Imager 1000

Requirements: Fluorospot Compact rel. VD10A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Fluorospot Compact Setup: - into Service select: Set, Configuration, Dicom Print Settings - set Alias=CMI1000 and in Network Settings set: - AET=CMI1000, Host name=CMI1000, IPAddr=accordingly, Port=5040 - Create New and set: Camera=Imation_gen - set: Size=8INx10IN, Format=1x1,1x2,2x2 - set: Own Print AET=eg FLC_PRINT_SCU and Retry=0 CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:





n Contrast=15 (Always=Y) n TFT Set (From list)=Siefl87b.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=N), Polarity=Positive (Always=N)

DICOM Network

Kodak CMI 1000




n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Siemens DSA Fluorospot H with some LASER IMAGER Products

Author: [email protected], Edition: November ́ 04 1

Setup for Siemens DSA Fluorospot H with LASER IMAGERS (old Siemens modality, no more in production) Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8700 LASER IMAGER / Dual Printer ..................................................... 2 n Kodak DryView 8700 LASER IMAGER / Plus................................................................. 3 n Kodak DryView 8700 LASER IMAGER / Standard ......................................................... 4 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8500 LASER IMAGER / Dual Printer ..................................................... 5 n Kodak DryView 8500 LASER IMAGER / Plus ................................................................. 6 n Kodak DryView 8500 LASER IMAGER / Standard ......................................................... 7 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8300 LASER IMAGER / Dual Printer ..................................................... 8 n Kodak DryView 8300 LASER IMAGER / Standalone ...................................................... 9 n Kodak Digital Science 969 HQ LASER IMAGER ....................................................... 10 n Kodak Digital Science 969 HQT LASER IMAGER..................................................... 11 n Kodak Digital Science 959 XL LASER IMAGER ........................................................ 12 n Kodak DryView 8100 LASER IMAGER.......................................................................... 13 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ).......... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /

Kodak DryView 8100 LASER IMAGER.......................................................................... 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) /

Kodak Ektascan 160 LASER IMAGER........................................................................... 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) /

Kodak Ektascan 2180 LASER PRINTER........................................................................ 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) /

Kodak Ektascan 1120 LASER PRINTER........................................................................ 22 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) ..... 24 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8100 LASER IMAGER (4) ..................................................................... 26 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8900 LASER IMAGER ......................................................................... 28

1 Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. 2 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0.



Siemens Fluorospot H with Kodak DryView 8800 MULTI-INPUT MANAGER /


DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI



Siemens Fluorospot H


3M 8700 DryView

3M8800Mul ti- Input Manager

Requirements: SHPT rel. 1.3, 8800 rel. 4.2, 8700 rel. 1.15 Setup: n on Siemens Fluoro-H install Camera Config.File DRYVIEW (if not available HQ) n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=XL, Timeout=30 n on SHPT set Density=14 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right


8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu:

n TFT=SIEFL87B (or SIEFL87C), Dmax=3.00, Contrast=4, Density=14 n on HOST Menu:





Siemens Fluorospot H with Kodak DryView 8700 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB


HostSPCI

SPDI




8700 Plus

3M 8700 DryView

Requirements: 8700 rel. 1.15 Setup: n on Siemens Fluoro-H install Camera Config.File DRYVIEW (if not available HQ) n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Right


8700 Plus Setup: n on COMM Menu:


n Modality=Fluoro-H, Timeout=30, Smooth Beta=2, Sharp Beta=2 n on IMAGE Menu:

n TFT=SIEFL87B (or SIEFL87C), Dmax=3.00, Contrast=4, Density=14 n on SYSTEM Menu:





Siemens Fluorospot H with Kodak DryView 8700 LASER IMAGER / Standard


SPCI

SPDI




8700 Standard

3M8700 DryView

Requirements: 8700 rel. 1.15 Setup: n on Siemens Fluoro-H install Camera Config.File DRYVIEW (if not available HQ)


8700 Standard Setup: n on TDB/C board:



n Modality=Fluoro-H, Timeout=30, Smooth Beta=2, Sharp Beta=2 n on IMAGE Menu:

n TFT=SIEFL87B (or SIEFL87C), Dmax=3.00, Contrast=4, Density=14 n on SYSTEM Menu:







DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI





3M 8700 DryView 3M8800Mult i- Input Manager

Requirements: SHPT rel. 1.3, 8800 rel. 5.1, 8500 rel. 1.22 Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=14 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right








Siemens Fluorospot H with Kodak DryView 8500 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB


Host


SPCI

SPDI




8500 Plus

3M 8700 DryView

Requirements: SHPT rel. 1.3, 8500 rel. 1.22 Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=14 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right


8500 Plus Setup: n on COMM Menu:




n on SYSTEM Menu: n Memory Management=Best Fit

n on EIB Menu: n Parity=Disable, Timeout=30



Siemens Fluorospot H with Kodak DryView 8500 LASER IMAGER / Standard


UKEIB


Host


SPCI

SPDI




8500 Standard

3M8700DryView

Imager

Requirements: SHPT rel. 1.3, 8500 rel. 1.22 Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=14 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right


8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Center n on COMM Menu: 959 Default n on IMAGE Menu:








8300 Dual

DEIB Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM



UKEIB


Host


SPCI

SPDI




Requirements: SHPT rel. 1.3, 8800 rel. 5.1, 8300 rel. 4.4 Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=15 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right


8300 Setup: n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set:

n Serial: Baud=1200, Data=8, Stop=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None, Modality Group=2

8800 Setup: n on COMM Menu: 959 Default n on IMAGE Menu: Density=15, Contrast=4 n on HOST Menu:

n Pixel CorreCtion=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2




Siemens Fluorospot H with Kodak DryView 8300 LASER IMAGER / Standalone

UKEIB


ImagerHost



SPCI

SPDI

Keypad




8300

Requirements: SHPT v1.3, 8300 v4.6, 8300 LUT v3.0.3 Note: in case no Pritzel Boxes are used between Fluorospot-H and 8300 (ie direct copper

digital Data Cable from Fluorospot-H cabinet to 8300 digital Input Module), then use a short digital Data Cable between Fluorospot-H and 8300 (eg 10mt. max) for image transfer to avoid image acquisition problems.

Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=15 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right


8300 Setup: n on 8300 Operator Menu set: D=15, C=4, Sharp/Smooth=0 ie Auto n on 8300 Service Menu set:

n Serial Control Interface: Baud Rate=1200, Nbr. of Data bits=8, Nbr. of Stop bits=1, Parity=Even, Delimiter=Comma, Protocol=3M

n Digital Interface: Parity=None, Modality Group=2



Siemens Fluorospot H with Kodak Digital Science 969 HQ LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M969 HQ

UKEIB


Host


SPCI

SPDI





Requirements: SHPT rel. 1.3, HQ rel. 4.2 Setup: n on Siemens Fluoro-H install Camera Config.File HQ n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=HQ, Timeout=30 n on SHPT set Density=14 and Contrast=4 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right







Siemens Fluorospot H with Kodak Digital Science 969 HQT LASER IMAGER

M969 HQT


SPCI

SPDI





Requirements: M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 Setup: n on Siemens Fluoro-H install Camera Config.File HQ


M969 HQT Setup: n on TDB/C board:



n Modality=Fluoro-H, Timeout=30 n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry)






Siemens Fluorospot H with Kodak Digital Science 959 XL LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M959 XL

UKEIB


Host


SPCI

SPDI




3 M L a se r I ma g er

Requirements: SHPT rel. 1.3, XL rel. 3.8 Setup: n on Siemens Fluoro-H install Camera Config.File XL n on SHPT Service Screen set Modality=Fluoro-H,Camera Type=XL, Timeout=30 n on SHPT set Density & Contrast depending on chemistry n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n on XL Input Module install LUT 322A0


M959 XL Setup: n on COMM Menu:





Siemens Fluorospot H with Kodak DryView 8100 LASER IMAGER


UKEIB


Host


SPCI

SPDI




DryView 8100

Imager

RS422 9-pole Plug

Requirements: SHPT v1.3, 8100 v1.1 Setup: n on Siemens Fluoro-H install Camera Config.File DRY_VIEW (if not available HQ) n on SHPT Service Screen set Modality=Fluorospot, Camera Type=XL, Timeout=30 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on SHPT set Density=14 and Contrast=9 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=30, P1,…,P6=0

n on IMAGE QUALITY-> TFT FILES Menu: TFT=SIEPOLY n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=Off n on LOCAL PANEL Menu: Contrast=9, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Disable



Siemens Fluorospot H via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


DPCCopper Cable

DPI4 Cable

UKEIB


Host


SPCI

SPDI




8700 Plus

3M8700DryView

Fiber Cable

Fiber Cable

DPC-to-UKEIB Cable

9410 PACS Link

Requirements: SHPT v1.3, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers. Setup: n on Fluorospot H install Camera Config.File DRYVIEW (if not available HQ) n on SHPT set: Contrast=4, Density=14 n on SHPT Service Screen set Modality=Fluoro-H, Camera=XL, Timeout=30 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right






on Device Setup, HOST KEYPADS: n Kpad=flH, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Siefl87b.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Dest.=Printer 1, Media Size=14x17, C=4, D=14 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60



Siemens Fluorospot H via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


DPCCopper Cable

DPI4 Cable

UKEIB


Host


SPCI

SPDI




DryView 8100

Control 9-pin

Data 37 pin

DPC-to-UKEIB Cable

9410 PACS Link


RS4229-pole Plug

Requirements: SHPT v1.3, 9410 v1.6, 8100 v2.4.1 Setup: n on Siemens Fluoro-H install Camera Config.File DRYVIEW (if not available HQ) n on SHPT set: Contrast=4, Density=14 n on SHPT Service Screen set Modality=Fluoro-H, Camera=XL, Timeout=30 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right






on Device Setup, HOST KEYPADS: n Kpad=flH, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Siefl87b.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=4, D=14 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0




Fluorospot H via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /





Kodak MIM 200

SPCI

SPDI

Kodak 160 camera



Fiber Cable


SiemensFluorospot H

Requirements: MIM 200 v6.1, KELI 160 v7.2 Fluoro-H Setup: on Siemens Fluoro-H install Camera Config.File XLP MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON



n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sieflh, n Mod.Name=flh, Primary Control: Type=Siemens FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off



n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0



n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:











Siemens37-pinData Cable

Kodak MIM 200

SPCI

SPDI

Kodak 2180 camera



Fiber Cable


SiemensFluorospot H

Requirements: MIM 200 v6.1, KELP 2180 v2.17H Fluoro-H Setup: on Siemens Fluoro-H install Camera Config.File XLP MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON



n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sieflh, n Mod.Name=flh, Primary Control: Type=Siemens FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On



n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:











Siemens37-pinData Cable

Kodak MIM 200

SPCI

SPDI

Kodak 1120 camera



Fiber Cable


SiemensFluorospot H

Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Fluoro-H Setup: on Siemens Fluoro-H install Camera Config.File XLP MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON



n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sieflh, n Mod.Name=flh, Primary Control: Type=Siemens FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off



n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On








Kodak MIM 200

SiemensFluorospot H

SPCI

SPDI


Fiber Cable


Fiber Cable

3 M 8700 DryView



Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM 200 Destinations and if HQ by installing HQ into Siemens Camera Config.File

Fluoro-H Setup: on Fluoro-H install Camera Config.File DRYVIEW (if not available HQ) MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON

i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF:

n Board/Channel=Digital Board 1 Channel 1, Logical Name=flH, n Mod.Name=flH, Primary Control: Type=3M - FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off



n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On



n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=4 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Siefl87b.w87, Auto Study=Off, Console=On, Annotation=Off









Kodak MIM 200

SiemensFluorospot H

SPCI

SPDI




Control 9-pin

Data 37 pin

Kodak DryView 8100

RS4229-pole Plug

Requirements: MIM200 v6.1, 8100 v2.4.1 Fluoro-H Setup: on Fluoro-H install Camera Config.File DRYVIEW (if not available HQ) MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON



n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=flH, n Mod.Name=flH, Primary Control: Type=3M - FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=2, Interpolation Smooth=2 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:

n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On




n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=4 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Siefl87b.w87, Auto Study=Off, Console=On, Annotation=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even





Requirements: Fluorospot-H rel. VE10, MIM 200 v6.1 Requirements: 8900 release 2.0 (ie DRE v2.00.b3, MIM v5.6.b3, MCS v2.00) Fluoro-H Setup: on Siemens Fluoro-H install Camera Config.File Kodak 2180 MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON

ie delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network:

n Computer Name=eg MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly

n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot H DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name= sieflh, n Mod.Name=flh, Primary Control: Type=Siemens FSPOT, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off



n on Configure, Destination, Add, Print, Network, Qualified, 8900, Set: n General: Log.Name=8900, IPAddr=accordingly n General: Database=8900, Model=8900, Memory=32 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040,AETitle=NER_8900,Counter=40,Response=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On




Kodak MIM 200

SPCI

SPDI




SiemensFluorospot H

Kodak DryView 8900

DICOM Network



n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.3 n SCU: Luminance Space= On, Variable Border Density=On n SCU: Curve Shape=On, Perception LUT =On, PLUT Service=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:

n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup:

n Select Destination= 8900, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=15 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Siefl87b.w87, Auto Study=Off, Console=On, Annotation=Off




n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On



n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Siefl87b.w87 (Always=Y) n Contrast= 15 (Always=Y), Smoothing Type=2 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=Y) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=fH

Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGER Products


Setup for Siemens DSA Fluorospot TOP / Polystar (TOP) with LASER IMAGERS (note: different models of Iconos, Siregraph, Sireskop could have either the setup of Fluorospot TOP or the setup of Fluorospot Compact)


Kodak DryView 8700 LASER IMAGER / Dual Printer ................................ ................................ ............ 3 n Kodak DryView 8700 LASER IMAGER / Plus................................ ................................ ......................... 4 n Kodak DryView 8700 LASER IMAGER / Standard ................................ ................................ ................. 5 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8500 LASER IMAGER / Dual Printer ................................ ................................ ............ 6 n Kodak DryView 8500 LASER IMAGER / Plus................................ ................................ ......................... 7 n Kodak DryView 8500 LASER IMAGER / Standard ................................ ................................ ................. 8 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8300 LASER IMAGER / Dual Printer ................................ ................................ ............ 9 n Kodak DryView 8300 LASER IMAGER / Standalone ................................ ................................ .............. 10 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8700 LASER IMAGER / Dual Printer / Kodak DryView 8300 LASER IMAGER / Dual Printer ................................ ................................ ............ 11

n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer / Kodak DryView 8500 LASER IMAGER / Dual Printer ................................ ................................ ............ 13

n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual Printer / Kodak DryView 8300 LASER IMAGER / Dual Printer ................................ ................................ ............ 14

n Kodak Digital Science 969 HQ LASER IMAGER................................ ................................ ................ 16 n Kodak Digital Science 969 HQT LASER IMAGER ................................ ................................ ............. 17 n Kodak Digital Science 959 XL LASER IMAGER ................................ ................................ ................ 18 n Kodak DryView 8100 LASER IMAGER................................ ................................ ................................ ... 19 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ ) ................................ .............................. 21

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER................................ ................................ ................................ ... 23

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER ................................ ................................ ................................ .... 25

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ................................ ................................ ................................ . 27

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ................................ ................................ ................................ . 29

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4) ................................ ......................... 31

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4)................................ ................................ .............................. 33




Connection via DICOM: n Kodak DryView 8300 LASER IMAGER..................................................................................... 35 n Kodak Digital Science 190 MEDICAL LASER PRINTER .................................................... 36 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ)................................................ 37

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8100 LASER IMAGER..................................................................................... 39

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 (1) / Kodak DryView 8300 LASER IMAGER..................................................................................... 41

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 160 LASER IMAGER...................................................................................... 43

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 2180 LASER PRINTER ................................................................................... 45

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 (2,3,4) / Kodak Ektascan 1120 LASER PRINTER ................................................................................... 47

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)..................................................................... 49

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ..................................... 51

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4,5)....................................................................... 53


n Kodak DryView 8900 LASER IMAGER..................................................................................... 57 n Kodak DryView 8150 LASER IMAGER..................................................................................... 59 n Kodak Color Medical Imager 1000............................................................................................. 61



Siemens Fluoro-TOP VB14 with Kodak DryView 8800 MULTI-INPUT MANAGER /


DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI



Siemens Fluorospot TOP


3M 8700 DryView


Requirements: Fluoro TOP rel. VB14, SHPT rel. 1.3, 8800 rel. 5.1, 8700 rel. 1.22

Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear

Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_DV8700 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right


8800/8700 Dual Setup: n on COMM Menu:


n if a) images to cam=lin, TFT=SIEFL87B, set at SHPT: C=4, D=14 n if b) images to cam=non-lin, TFT=SIEWS87B, Dmax=3.00, C=2, D=14

n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=0

n on EIB Menu: Parity=Enable Even, Timeout=75



Siemens Fluoro-TOP VB14 with Kodak DryView 8700 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB


HostSPCI

SPDI




8700 Plus

3M 8700 DryView

Requirements: Siemens Fluoro TOP rel. VB14, 8700 Plus rel. 1.15 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_DV8700 n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Right

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 8700 Plus Setup: n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Sienet, Timeout=75 n on IMAGE Menu:

n if a) images to cam=lin, TFT=SIEFL87B, Dmax=3.00, C=4, D=14 n if b) images to cam=non-lin, TFT=SIEWS87B, Dmax=3.00, C=2, D=14

n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even, Timeout=75



Siemens Fluoro-TOP VB14 with Kodak DryView 8700 LASER IMAGER / Standard


SPCI

SPDI




8700 Standard

3M 8700 DryView

Requirements: Siemens Fluorospot TOP rel. VB14, 8700 Standard rel. 1.15 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_DV8700

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 8700 Standard Setup: n on TDB/C board:

n Jumpers=RS232, Switch=Center n on COMM Menu:


n Modality=Sienet, Timeout=75 n on IMAGE Menu:

n if a) images to cam=lin, TFT=SIEFL87B, Dmax=3.00, C=4, D=14 n if b) images to cam=non-lin, TFT=SIEWS87B, Dmax=3.00, C=2, D=14

n on SYSTEM Menu: n Memory Management=Best Fit

n on EIB Menu: n Parity=Enable Even, Timeout=75





DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI





3M 8700 DryView 3M8800 Multi-InputManager

Requirements: Fluoro TOP rel. VB14, SHPT rel. 1.3, 8800 rel. 5.1, 8500 rel. 1.22


Setup: n on Siemens Fluorospot TOP rel. VB14 install Camera Config.File Imation_DV8500 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right








Siemens Fluoro-TOP VB14 with Kodak DryView 8500 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB


Host


SPCI

SPDI




8500 Plus

3M8700 DryView

Requirements: Fluorospot TOP rel. VB14, SHPT rel. 1.3, 8500 Plus rel. 1.22


Setup: n on Siemens Fluorospot TOP rel. VB14 install Camera Config.File Imation_DV8500 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right


8500 Plus Setup: n on COMM Menu: 959 Default n on IMAGE Menu:






Siemens Fluoro-TOP VB14 with Kodak DryView 8500 LASER IMAGER / Standard


UKEIB


Host


SPCI

SPDI




8500 Standard

3M 8700 DryView

Imager

Requirements: Fluoro TOP rel. VB14, SHPT rel. 1.3, 8500 Standard rel. 1.22


Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_DV8500 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Center n on COMM Menu: 959 Default n on IMAGE Menu:








8300 Dual

DEIB

Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM



UKEIB


Host


SPCI

SPDI




3M8800Multi-InputM

anager

Requirements: Fluoro TOP rel. VB14, SHPT rel. 1.3, 8800 rel. 5.1 Requirements: 8300 rel. 4.6, 8300 LUT rel. 2.0.0


Setup: n on Siemens Fluorospot TOP rel. VB14 install Camera Config.File Imation_DV8300 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n if a), set at SHPT: Contrast=4, Density=15


n Serial Control Interface: 1200, 8, 1, Even, Protocol=3M n Digital Interface: Parity=None, if a) Modality Group=2, if b) Modality Group=4

8800 Setup: n on COMM Menu: 959 Default n on IMAGE Menu: Density=15, Contrast=4




Siemens Fluoro-TOP VB14 with Kodak DryView 8300 LASER IMAGER / Standalone

UKEIB


ImagerHost



SPCI

SPDI

Keypad




8300

Requirements: Siemens Fluorospot TOP rel. VB14, SHPT rel. 1.3 Requirements: 8300 rel. 4.6, 8300 LUT rel. 2.0.0 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluorospot TOP rel. VB14 install Camera Config.File Imation_DV8300 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n if a), set at SHPT: Contrast=4, Density=14




n Digital Interface: Parity=Even n if a) set Modality Group=2, if b) set Modality Group=4




Kodak DryView 8700 LASER IMAGER / Dual Printer / Kodak DryView 8300 LASER IMAGER / Dual Printer

DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI




8300 Dual

Fiber Cable

3M8800Multi-InputM

anager

3M8700DryView

8700 Dual

Fiber Cable

POEIB


37-pin Digital Cable

Requirements: Fluoro TOP VB14, SHPT 1.3, 8800 v.5.1, 8700 v.1.22 Requirements: 8300 rel. 4.6, 8300 LUT rel. 2.0.0 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_MIM8800 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n if a), set at SHPT: Contrast=4, Density=15






n Digital Interface: Parity=None n if a) set Modality Group=2, if b) set Modality Group=4


n if a), set TFT=SIEFL87B, set at SHPT: Contrast=4, Density=14 n if b), set TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14







DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI





3M 8700 DryView

3M8800 Multi-Input Manager

3M 8700 DryView

8500 Dual

Fiber Cable

Requirements: Fluoro TOP VB14, SHPT 1.3, 8800 v.5.1, 8700 v.1.22, 8500 v.1.22 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_MIM8800 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8800/8700 Dual/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: if a), set TFT=SIEFL87B, set at SHPT: C=4, D=14 n on IMAGE Menu: if b), set TFT=SIEWS87B, Dmax=3.00, C=2, D=14 n on HOST Menu:







DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI




8300 Dual

Fiber Cable

3M8800Multi-InputM

anager

3M8700DryView

8500 Dual

Fiber Cable

POEIB



Requirements: Fluoro TOP VB14, SHPT 1.3, 8800 v.5.1, 8500 v.1.22 Requirements: 8300 rel. 4.6, 8300 LUT rel. 2.0.0 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_MIM8800 n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n if a), set at SHPT: Contrast=4, Density=15






n Digital Interface: Parity=None n if a) set Modality Group=2, if b) set Modality Group=4


n if a), set TFT=SIEFL87B, set at SHPT: Contrast=4, Density=14 n if b), set TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14





Siemens Fluoro-TOP VB14 with Kodak Digital Science 969 HQ LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M969 HQ

UKEIB


Host


SPCI

SPDI





Requirements: Flurospot TOP rel. VB14, SHPT rel. 1.3, M969 HQ rel. 5.1 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluorospot TOP rel. VB14 install Camera Config.File Imation_M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 M969 HQ Setup: n on COMM Menu:


n if a), set TFT=SIEFC969 (or SIEFL87B), set at SHPT: C=4, D=14 n if b), set TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14

n on HOST Menu: n Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes

n on EIB Menu: n Parity=Enable Even, Timeout=75



Siemens Fluoro-TOP VB14 with Kodak Digital Science 969 HQT LASER IMAGER

M969 HQT


SPCI

SPDI





Requirements: Fluoro TOP rel. VB14, M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0. Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_M969_HQ

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 M969 HQT Setup: n on TDB/C board: Jumpers=RS232, Switch=Center n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Sienet, Timeout=75 n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry)

n if a), TFT=PMS, C=15, D=7, on OIC Menu: Chemistry=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even, Timeout=75



Siemens Fluoro-TOP VB14 with Kodak Digital Science 959 XL LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M959 XL

UKEIB


Host


SPCI

SPDI




3M L aser I m ag er

Requirements: Siemens Fluoro TOP rel. VB14, SHPT rel. 1.3, M959 XL rel. 3.8 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_M959_XL n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n if a), on SHPT set Density & Contrast depending on chemistry n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n on XL Input Module install LUT 322A0

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 M959 XL Setup: n on COMM Menu:


n Parity=Enable Even, Timeout=75



Siemens Fluorospot TOP VB14 with Kodak DryView 8100 LASER IMAGER


UKEIB


Host


SPCI

SPDI




DryView 8100

Imager

RS422 9-pole Plug

Requirements: Siemens Fluoro TOP rel. VB14, SHPT v1.3, 8100 v1.1 Note: Fluoro-TOP VB14 could be configured with: a) edit/parameter/update/images to camera=linear b) edit/parameter/update/images to camera=non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera, in

this case use Dmax=300, C=4, TFT=SIEFL87B d) if images to camera non-linear then Image Data lutted by F-TOP, linear-in-Density,

LUT into Camera, then in this case use Dmax=300, C=2, TFT=WRKSTN2A. Note: Fluoro-TOP VB14 could be with: edit/parameter/update/Optimize Image set to Yes or No n if Optimize Image=No image sent from F-TOP to camera is always 20 Meg n if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Setup: n on Siemens Fluoro TOP rel. VB14 install Camera Config.File Imation_DV8700 n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n in case of a) on SHPT set Contrast=4, Density=14 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right




n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=Off n on IMAGE QUALITY-> TFT FILES: TFT=a) SIEFL87B or b) WRKSTN2A n on LOCAL PANEL: Contrast=a) 4 or b) 2, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4096 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Even



Fluoro-TOP via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


DPCCopper Cable

DPI4 Cable

UKEIB


Host


SPCI

SPDI




8700 Plus

3M8700 DryView

Fiber Cable

Fiber Cable

DPC-to-UKEIB Cable

9410 PACS Link

Requirements: Fluorospot TOP VB14A, SHPT v1.3, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into Fluorospot TOP Camera Config.File

Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP



Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera

in this case use Dmax=300, C=4, TFT=SIEFL87B d) if images to camera non-linear then Image Data lutted by F-TOP, linear-in-Density

LUT into Camera, then in this case use Dmax=300, C=2, TFT=WRKSTN2A

Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Setup: n on Siemens Fluoro TOP rel. VB14A install Camera Config.File Imation_DV8700 n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n in case of a) on SHPT set Contrast=4, Density=14 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 9410 Setup:


on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=75, Parity=Even, Memory=22 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200

on Device Setup, HOST KEYPADS: n Kpad=flTOP, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87, Multi-Printer Resp.=Off n Autoswitching=Off, Mem.Full =On, Image Size =On, Alarm Mode=On n into Defaults: Dest.=Printer 1, Media Size=14x17, C=a) 4 or b) 2, D=14 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60



Fluorospot TOP via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


DPCCopper Cable

DPI4 Cable

UKEIB


Host


SPCI

SPDI




DryView 8100

Control 9-pin

Data 37 pin

DPC-to-UKEIB Cable

9410 PACS Link


RS4229-pole Plug

Requirements: Fluorospot TOP VB14A, SHPT v1.3, 9410 v1.6, 8100 v2.4.1 Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera





Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Setup: n on Fluoro TOP install Camera Config.File Imation_DV8700 (or if problems XL_959) n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n in case of a) on SHPT set Contrast=4, Density=14 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 9410 Setup:


on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=75, Parity=Even, Memory=22 n Serial Port: Protocol=952, Parity=Even, Baud Rate=1200

on Device Setup, HOST KEYPADS: n Kpad=flTOP, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87, Multi-Printer Resp.=Off n Autoswitching=Off, Mem.Full =On, Image Size =On, Alarm Mode=On n into Defaults: Dest.=Printer 1, Media Size=14x17, C=a) 4 or b) 2, D=14 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0




Fluorospot TOP via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /





Kodak MIM 200

SPCI

SPDI

Kodak 160 camera



Fiber Cable


SiemensFluorospotTOP

Requirements: Fluorospot TOP VB14A Requirements: MIM 200 v6.1, KELI 160 v7.2 Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera

in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 d) if images to camera non-linear then Image Data lutted by F-TOP, linear-in-Density

LUT into Camera, then use Dmax=300, Curve Shape=0.0, Film Contrast=0

Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Fluoro-TOP Setup: on Fluoro TOP VB14A install Camera Config.File Kodak_190






n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot TOP DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=ftop, n Mod.Name=ftop, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off

n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=Even, Timer=5, Sync=On, Pixel=8

n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:



n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=a) 3.0 or b) 0.0, Auto Study=Off, Console=On









Kodak MIM 200

SPCI

SPDI

Kodak 2180 camera



Fiber Cable



Requirements: Fluorospot TOP VB14A Requirements: MIM 200 v6.1, KELP 2180 v2.17H Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera











n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:












Kodak MIM 200

SPCI

SPDI

Kodak 1120 camera



Fiber Cable



Requirements: Fluorospot TOP VB14A Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera











n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n 2400, RS422, 7, 2, Odd n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:












Kodak MIM 200


SPCI

SPDI


Fiber Cable


Fiber Cable

3M 8700 DryView



Requirements: Fluorospot TOP VB14A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations and in case of 8500 and HQ by installing 8500 and HQ into Fluorospot TOP Camera Config.File.

Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera



Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No



Fluoro-TOP Setup: on Fluoro TOP VB14A install Camera Config.File Imation_DV8700 MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON

i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot TOP DF:

n Board/Channel=Digital Board 1 Channel 1, Logical Name=ftop, n Mod.Name=ftop, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off



n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2 n Film Contrast=a) 4 or b) 2, Image Dmax=3.00, Border=Black, Collation=Off n Auto Print=On, TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Auto Study=Off, Console=On, Annotation=Off








Kodak MIM 200


SPCI

SPDI




Control 9-pin

Data 37 pin

Kodak DryView 8100

RS4229-pole Plug

Requirements: Fluorospot TOP VB14A Requirements: MIM200 v6.1, 8100 v2.4.1 Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/update n Is it a DFR-N with local camera server? yes n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP VB14 could be configured with: a) images to camera linear or b) images to camera non-linear c) if images to camera linear then Image Data not lutted by F-TOP, lutted by Camera



Note: Fluoro-TOP VB14 could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No Fluoro-TOP Setup: on Fluoro TOP VB14A install Camera Config.File Imation_DV8700 (or if problems XL_959)






n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Fluorospot TOP DF: n Board/Channel=Digital Board 1 Channel 1, Logical Name=sct, n Mod.Name=sct, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=Even, Timer=5, Sync=On, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=2, Interpolation Smooth=2 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:


n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2 n Film Contrast=a) 4 or b) 2, Image Dmax=3.00, Border=Black, Collation=Off n Auto Print=On, TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Auto Study=Off, Console=On, Annotation=Off



8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even



Fluorospot TOP via DICOM with Kodak DryView 8300 LASER IMAGER


DryView 8300

DICOM Network

Requirements: Siemens Fluorospot TOP rel. VC01B Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8300_Dicom, n DICOM services=PRINT_SCP, aet=IMN_8300, port=104, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always aprox 5 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 5 Meg In case any formats-problem appears on F-TOP (e.g., 2:1 not ok), set Optimize Image=No 8300 Setup: n on 8300 Operator Menu into Configure User set:

n Density=16, Contrast=1, Sharp/Smooth=1 n on 8300 Service Menu into Configure User set:

n Modality Group=4 (i.e., LUT=linear-in-Density)



Fluorospot TOP via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: Fluorospot TOP rel. VC01B Requirements: 190 rel. 1.7.29 Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=K190 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Kodak_190_Dicom, n DICOM services=PRINT_SCP, aet=190, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=0.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Fluorospot TOP via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /



8700 Plus

9410 PACS Link

DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: Fluorospot TOP rel. VC01B Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers and if HQ by installing HQ into Fluoro-TOP DICOM Camera Config.File

Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8700 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8700_Dicom, n DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No 9410 Setup:



n on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber n Command Set=Superset, Baud=19200, Data=8, Stop=1, Parity=None n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0








DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Fluorospot TOP rel. VC01B Requirements: 9410 v1.6, 8100 v2.4.1 Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8100 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8100_Dicom, n DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No






on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Fluorospot TOP rel. VC01B Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8300_Dicom, n DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always aprox 5 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 5 Meg In case any formats-problem appears on F-TOP (e.g., 2:1 not ok), set Optimize Image=No






n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




Fluorospot TOP via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, KELI 160 v7.2 Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=K160 Dicom Printer, n modality type=DICOM_PRINTER, n camera type=Kodak_160_Dicom (or Kodak_190_Dicom), n DICOM services=PRINT_SCP, aet=160, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No







n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200

Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=K2180 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Kodak_2180_Dicom, n DICOM services=PRINT_SCP, aet=2180, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No







n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200

Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=K1120 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Kodak_1120_Dicom, n DICOM services=PRINT_SCP, aet=1120, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No






Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: Fluorospot TOP rel. VD10A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: on Fluoro-TOP only a DICOM camera could be installed Note: on Fluoro-TOP Service-CD nbr.7 is present 8200 Camera Config.File Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=K8200 Dicom Printer, n modality type=DICOM_PRINTER, n camera type=Kodak_8200_Dicom (or Kodak_190_Dicom), n DICOM services=PRINT_SCP, aet=8200, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No MIM200 Setup: n on Configure, Network:





n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7









DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: on Fluoro-TOP only a DICOM camera could be installed Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination and if HQ by installing HQ into Fluoro-TOP DICOM Camera Config.File

Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8700 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8700_Dicom, n DICOM services=PRINT_SCP, aet=8700, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8100 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8100_Dicom, n DICOM services=PRINT_SCP, aet=8100, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case any formats-problem appears on F-TOP (e.g., 12:1 not ok), set Optimize Image=No MIM200 Setup: n on Configure, Network:








Kodak DryView 8300

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin


Requirements: Fluorospot TOP rel. VC01B Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: n into Sevice Login (at Unix level), from service menu do sit install: n from main menu do: edit/config/create n node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, n modality type=DICOM_PRINTER, camera type=Imation_DV8300_Dicom, n DICOM services=PRINT_SCP, aet=8300, port=5040, IPaddr=accordingly n RETURN, exit, exit (i.e., in order to return to main menu) n edit/parameter/update n DICOM Print Camera=kodakd n images to camera=non-linear n optimize matrix size for camera=no n HCC density=300 n exit/exit (i.e., in order to return to main menu) n from main menu do: install/net n exit/exit (i.e., in order to return to main menu) n dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always aprox 5 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 5 Meg In case any formats-problem appears on F-TOP (e.g., 2:1 not ok), set Optimize Image=No



MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify:

n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=wkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off





Requirements: Fluorospot TOP rel. VC01B Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup (using Imation 969 HQ Config.file): - into Sevice Login (at Unix level), from service menu do sit install: - from main menu do: edit/config/create - node name=kodakd (max 6 chars), component name=DV8900 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Imation_969_HQ_Dicom, - DICOM services=PRINT_SCP, aet=8900, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - edit/parameter/update - DICOM Print Camera=kodakd - images to camera=non-linear - optimize matrix size for camera=no - HCC density=300 - exit/exit (ie in order to return to main menu) - from main menu do: install/net - exit/exit (ie in order to return to main menu) - dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case of formats-problem on F-TOP (eg 12:1 not ok), set Optimize Image=No 8900 Setup: n on Configuration, System, Network:




DICOM Network

Kodak DryView 8900




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Wrkstn2a.w87 (Always=Y) n Contrast= 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ftop




Requirements: Fluorospot TOP rel. VC01B Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: on Fluoro-TOP only a DICOM camera could be installed Note: on Fluoro-TOP Service-CD nbr.7 is present 8200 Camera Config.File Fluorospot TOP Setup (using Imation 969 HQ Config.file): - into Sevice Login (at Unix level), from service menu do sit install: - from main menu do: edit/config/create - node name=kodakd (max 6 chars), component name=DV8150 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_8200_Dicom, - DICOM services=PRINT_SCP, aet=DV8150, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - edit/parameter/update - DICOM Print Camera=kodakd - images to camera=non-linear - optimize matrix size for camera=no - HCC density=300 - exit/exit (ie in order to return to main menu) - from main menu do: install/net - exit/exit (ie in order to return to main menu) - dfr to return to application and reboot Fluorospot TOP Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always 20 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 20 Meg In case of formats-problem on F-TOP (eg 12:1 not ok), set Optimize Image=No 8150 Setup: n on Configuration, System, Network:


n on Configuration, DICOM SCP, Communications:

SiemensFluorospot TOP

DICOM Network

Kodak DryView 8150




n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ftop



Fluorospot TOP via DICOM with Kodak Color Medical Imager 1000

Requirements: Fluorospot TOP rel. VC01B Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: on Fluoro-TOP only a DICOM camera could be installed Fluorospot TOP Setup: - into Sevice Login (at Unix level), from service menu do sit install: - from main menu do: edit/config/create - node name=kodakd (max 6 chars), component name=CMI1000 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Imation_DV8300_Dicom, - DICOM services=PRINT_SCP, aet=CMI1000, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - edit/parameter/update - DICOM Print Camera=kodakd - images to camera=non-linear - optimize matrix size for camera=no - HCC density=300 - exit/exit (ie in order to return to main menu) - from main menu do: install/net - exit/exit (ie in order to return to main menu) - dfr to return to application and reboot Fluorospot TOP

Note: Fluoro-TOP could be configured with Optimize Image set to Yes or No: - if Optimize Image=No image sent from F-TOP to camera is always aprox 5 Meg - if Optimize Image=Yes image sent from F-TOP to camera is less or equal 5 Meg In case formats-problem appears on F-TOP (eg 2:1 not ok), set Optimize Image=No CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:


n Edit Host Name/AE Title=CMI1000

DICOM Network

Kodak CMI 1000

SiemensFluorospot TOP

Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGER Products


Setup for Siemens DSA HICOR / ACOM / BICOR / COROSCOP with LASER IMAGERS Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER /



Kodak DryView 8300 LASER IMAGER / Dual Printer ..................................................... 8 n Kodak Digital Science 969 HQ LASER IMAGER ....................................................... 9 n Kodak Digital Science 969 HQT LASER IMAGER..................................................... 10 n Kodak Digital Science 959 XL LASER IMAGER ........................................................ 11 n Kodak DryView 8100 LASER IMAGER.......................................................................... 12 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (1)................................... 13

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1) ..................................................................... 15

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) .................................................................. 17

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4)............................................................... 19


n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4)................................... 23

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4) ..................................................................... 25




Siemens HICOR / ACOM with| Kodak DryView 8800 MULTI-INPUT MANAGER /


VEIB with PLL

Fiber Cable

Fiber Cable

8800 MIM

UKEIB

Keypad

Video OUT

Keypad

Video Cable

SiemensHICOR


3M 8700 DryView


Requirements: 8800 rel. 5.1, 8700 rel. 1.22 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8800/8700 Dual Setup: n on COMM Menu:


n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on EIB Menu:

n Vert.Del.=70, Image Lines=1092, Horiz.Del.=258, Horiz.Act.=1092 n Clock Delay=3, Fine Pixel Delay=103, Black Level=109 n Pixel Clock Freq.=45, Horiz.Freq.=16-48, Double Gain=0.5-1 n Passes=15, Window Width=3, Retries=2 n Clock Range=44-50, Clocks per Line=1440, Interlaced, Odd



Siemens HICOR / ACOM with Kodak DryView 8700 LASER IMAGER / Plus

VEIB with PLL

Fiber Cable

Fiber Cable

UKEIB

Keypad

Video OUT

Keypad

Video Cable

SiemensHICOR

8700 Plus

3M 8700 DryView

Requirements: 8700 Plus rel. 1.22 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8700 Plus Setup: n on COMM Menu:


n TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on SYSTEM Menu:





Siemens HICOR / ACOM with Kodak DryView 8700 LASER IMAGER / Standard

Keypad

Video OUTVideo Cable

SiemensHICOR

8700 Standard

3M8700 DryView

Requirements: 8700 Standard rel. 1.22 8700 Standard Setup: n on TDB/C board:








Siemens HICOR / ACOM with Kodak DryView 8800 MULTI-INPUT MANAGER /


VEIB with PLL

Fiber Cable

Fiber Cable

8800 MIM

UKEIB

Keypad

Video OUT

Keypad

Video Cable

SiemensHICOR


3M 8700 DryView


Requirements: 8800 rel. 5.1, 8500 rel. 1.22 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8800/8500 Dual Setup: n on COMM Menu:






Siemens HICOR / ACOM with Kodak DryView 8500 LASER IMAGER / Plus

VEIB with PLL

Fiber Cable

Fiber Cable

UKEIB

Keypad

Video OUT

Keypad

Video Cable

SiemensHICOR

8500 Plus

3M 8700 DryView

Requirements: 8500 Plus rel. 1.22 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8500 Plus Setup: n on COMM Menu:







Siemens HICOR / ACOM with Kodak DryView 8500 LASER IMAGER / Standard

Keypad


SiemensHICOR

8500 Standard

3M8700 DryView

Requirements: 8500 Standard rel. 1.22 Setup: n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Left n on COMM Menu: 8700 Keypad Default n on IMAGE Menu: TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu:




Siemens HICOR / ACOM with Kodak DryView 8800 MULTI-INPUT MANAGER /


8300 Dual

VEIB with PLL Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM



UKEIB

Keypad

Video OUT

Keypad

Video Cable

Siemens HICOR

Requirements: 8800 rel. 5.1, 8300 rel. 4.4 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8300 Setup: n on 8300 Operator Menu set:




8800 Setup: n on COMM Menu:


n Density=16, Contrast=10 n on EIB Menu:




Siemens HICOR / ACOM with Kodak Digital Science 969 HQ LASER IMAGER

VEIB with PLL

Fiber Cable

Fiber Cable

M969 HQ

UKEIB

Keypad

Video OUT

Keypad

Video Cable

SiemensHICOR


Requirements: M969 HQ rel. 5.1 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON M969 HQ Setup: n on COMM Menu:






Siemens HICOR / ACOM with Kodak Digital Science 969 HQT LASER IMAGER

M969 HQT

Keypad


SiemensHICOR


Requirements: M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 M969 HQT Setup: n on TDB/C board: Jumpers=RS422, Switch=Left n on COMM Menu: 8700 Keypad Default n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry)

n TFT=PMS, Contrast=15, Density=7, on OIC Menu: Chemistry=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu:




Siemens HICOR / ACOM with Kodak Digital Science 959 XL LASER IMAGER

VEIB with PLL

Fiber Cable

Fiber Cable

M959 XL

KEIB

XL Keypad

Video OUT

Keypad

Video Cable

SiemensHICOR


Requirements: M959 XL rel. 3.8 Setup: n on XL Control Panel set Density & Contrast depending on chemistry n on KEIB set Jumper=RS422 n on XL Input Module install LUT 322A0 M959 XL Setup: n on COMM Menu:





Siemens HICOR/ACOM with Kodak DryView 8100 LASER IMAGER

Copper Cable

UKEIB

Keypad

Video OUT

Keypad

Video Cable

SiemensHICOR

DryView 8100

Imager

RS422 9-pole Plug

Requirements: 8100 v1.1 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=10, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=2 n on IMAGE QUALITY-> TFT FILES Menu: TFT=SIEPOLY n on LOCAL PANEL Menu: Contrast=12, Density=2.90 n on SYSTEM Menu: Acquire=Video n on VIDEO Menu: Parameters as per autosync

aprox Interlace=ON, Image Height=1092, Horiz.Tot=1440, Image Width=1092



Siemens HICOR / ACOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Copper CableImagraph CardOctopus Cable

UKEIB

Keypad

Video OUT

KeypadSiemens HICOR

DryView 8700 Plus

RS422 CopperConverter Cable

9410 PACS Link

Fiber Cable

Video Cable

Imager

Fiber Cable

3M8700DryView

Requirements: Hicor rel. VA30E, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for

8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers.

Hicor Setup: on Hicor set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 9410 Setup:


on I/O CARD SETUP, Serial Ports Menu: n COM3: Protocol=SuperSet, Parity=None, Baud Rate=19200



on I/O CARD SETUP, Imagraph Video Menu (aprox): n Vert.Tot=1249, Frame Period=40, Interlace=ON, Vert.Back Porch=71.0 n Image Height=1022, Horiz.Tot=1440, Horiz.Back Sync=310 n Image Width=1024, Horiz.Sync Width=2486, Horiz.Back Porch=297

on Device Setup, IMS KEYPADS: n Kpad=hicor, Hosp=siemens, Serial Port=COM3, Image Card=Imagraph, Ch=A1 n Available Printers=8700, Film Destination=Processor, TFT/ULUT=Siepoly.w87 n into Defaults: Dest=8700, Size=14x17, C=10, D=15, Dmax=3.1, Bit=8 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60



Siemens HICOR / ACOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Copper CableImagraph CardOctopus Cable

UKEIB

Keypad

Video OUT

KeypadSiemens HICOR

DryView 8100

Control 9-pin

Data 37 pin

RS422 CopperConverter Cable

9410 PACS Link


RS4229-pole Plug

Video Cable

Imager

Requirements: Hicor rel. VA30E, 9410 v1.6, 8100 v2.4.1 Hicor Setup: n on Hicor set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 9410 Setup:


on I/O CARD SETUP, Serial Ports Menu: n COM3: Protocol=SuperSet, Parity=None, Baud Rate=19200

on I/O CARD SETUP, Imagraph Video Menu (aprox): n Vert.Tot=1249, Frame Period=40, Interlace=ON, Vert.Back Porch=71.0 n Image Height=1022, Horiz.Tot=1440, Horiz.Back Sync=310 n Image Width=1024, Horiz.Sync Width=2486, Horiz.Back Porch=297



on Device Setup, IMS KEYPADS: n Kpad=hicor, Hosp=siemens, Serial Port=COM3, Image Card=Imagraph, Ch=A1 n Available Printers=8100, Film Destination=Processor, TFT/ULUT=Siepoly.w87 n into Defaults: Dest=8100, Size=14x17, C=10, D=15, Dmax=3.1, Bit=8 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0




Siemens HICOR/ACOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Hicor rel. VA30E Requirements: MIM 200 v6.1, KELI 160 v7.2 Hicor Setup: set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input,Direct Conn, Config.Add, Video, Qual.=Hicor/Bicor 1024 50Hz: n Board/Channel=Video60 Board 1 Channel 1, Logical Name= hicor, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n HL=32, HD=22.75, Clk=45, Tot.Pxls=1440, Image Pxls=1024 n HS=2.49, HFP=0, HBP=4.44, HB=0 n Image Lines=1024, Tot.Lines=1248, VBP=70, VS=3, PreE=PostE=3 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On

Keypad

Video CableVideo OUT

SiemensHICOR

Kodak MIM 200

Video CardOctopus Cable


Kodak 160 cameraCrossedNetwork Cable



n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:








Requirements: Hicor rel. VA30E Requirements: MIM 200 v6.1, KELP 2180 v2.17H Hicor Setup: set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input,Direct Conn, Config.Add, Video, Qual.=Hicor/Bicor 1024 50Hz: n Board/Channel=Video60 Board 1 Channel 1, Logical Name= hicor, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n HL=32, HD=22.75, Clk=45, Tot.Pxls=1440, Image Pxls=1024 n HS=2.49, HFP=0, HBP=4.44, HB=0 n Image Lines=1024, Tot.Lines=1248, VBP=70, VS=3, PreE=PostE=3 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Keypad


SiemensHICOR

Kodak MIM 200



Kodak 2180 camera

Fiber Cable



n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination= KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:








Requirements: Hicor rel. VA30E Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Hicor Setup: set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input,Direct Conn, Config.Add, Video, Qual.=Hicor/Bicor 1024 50Hz: n Board/Channel=Video60 Board 1 Channel 1, Logical Name= hicor, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n HL=32, HD=22.75, Clk=45, Tot.Pxls=1440, Image Pxls=1024 n HS=2.49, HFP=0, HBP=4.44, HB=0 n Image Lines=1024, Tot.Lines=1248, VBP=70, VS=3, PreE=PostE=3 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Keypad


SiemensHICOR

Kodak MIM 200



Kodak 1120 camera

Fiber Cable



n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination= KELP 1120, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:








Requirements: Hicor rel. VA30E Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for

8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations

Hicor Setup: set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input,Direct Conn, Config.Add, Video, Qual.=Hicor/Bicor 1024 50Hz: n Board/Channel=Video60 Board 1 Channel 1, Logical Name= hicor, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n HL=32, HD=22.75, Clk=45, Tot.Pxls=1440, Image Pxls=1024 n HS=2.49, HFP=0, HBP=4.44, HB=0 n Image Lines=1024, Tot.Lines=1248, VBP=70, VS=3, PreE=PostE=3 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On

Keypad


SiemensHICOR

Kodak MIM 200



Fiber Cable

Fiber Cable

3M8700Dr yView




n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=11, Film Contrast=10 n Image Dmax=2.90, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Siepoly.w87, Auto Study=Off, Console=On, Annotation=Off






Requirements: Hicor rel. VA30E Requirements: MIM200 v6.1, 8100 v2.4.1 Hicor Setup: set HCD=Video_N (for 512 matrix) or Video_H (for 1024 matrix) MIM200 Setup: n on Configure, Network:


n on Config,Input,Direct Conn, Config.Add, Video, Qual.=Hicor/Bicor 1024 50Hz: n Board/Channel=Video60 Board 1 Channel 1, Logical Name= hicor, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n HL=32, HD=22.75, Clk=45, Tot.Pxls=1440, Image Pxls=1024 n HS=2.49, HFP=0, HBP=4.44, HB=0 n Image Lines=1024, Tot.Lines=1248, VBP=70, VS=3, PreE=PostE=3 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:

n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Keypad

Video Cable

Kodak MIM 200




Control 9-pin

Data 37 pin

RS4229-pole Plug

Kodak DryView8100

SiemensHICOR

Video OUT



n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=11, Film Contrast=10 n Image Dmax=2.90, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Siepoly.w87, Auto Study=Off, Console=On, Annotation=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Siemens DSA Polytron TOP/Angiostar/Multistar/Neurostar with LASER IMAGER Products


Siemens DSA Polytron TOP / Angiostar / Multistar / Neurostar with LASER IMAGERS Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER /


Kodak DryView 8500 LASER IMAGER / Dual................................................................ 5 n Kodak DryView 8500 LASER IMAGER / Plus ................................................................. 6 n Kodak DryView 8500 LASER IMAGER / Standard ......................................................... 7 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8300 LASER IMAGER / Dual Printer ..................................................... 8 n Kodak DryView 8300 LASER IMAGER / Standalone ...................................................... 9 n Kodak Digital Science 969 HQ LASER IMAGER ....................................................... 10 n Kodak Digital Science 969 HQT LASER IMAGER..................................................... 11 n Kodak Digital Science 959 XL LASER IMAGER ........................................................ 12 n Kodak DryView 8100 LASER IMAGER.......................................................................... 13 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (1)................................... 14

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1) ..................................................................... 16

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) .................................................................. 18



n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4)................................... 24

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4) ..................................................................... 26




Siemens Polytron TOP with Kodak DryView 8800 MULTI-INPUT MANAGER /


DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB

Keypad

SPDI

Keypad


SiemensPolytron TOP


3M 8700 DryView



Requirements: Polytron TOP rel. VD07E, 8800 rel. 5.1, 8700 rel. 1.22 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8800/8700 Dual Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on EIB Menu: Parity=Enable Odd, Timeout=10



Siemens Polytron TOP with Kodak DryView 8700 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB

Keypad

SPDI

Keypad


SiemensPolytron TOP

8700 Plus

3M 8700 DryView


Requirements: Siemens Polytron TOP rel. VD07E, 8700 Plus rel. 1.22 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8700 Plus Setup: n on COMM Menu:




n Parity=Enable Odd, Timeout=10



Siemens Polytron TOP with Kodak DryView 8700 LASER IMAGER / Standard


Keypad

SPDI


SiemensPolytron TOP

8700 Standard

3M8700 DryView

Requirements: Siemens Polytron TOP rel. VD07E, 8700 Standard rel. 1.22 8700 Standard Setup: n on TDB/C board:









Kodak DryView 8500 LASER IMAGER / Dual

DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB

Keypad

SPDI

Keypad


SiemensPolytron TOP


3M 8700 DryView



Requirements: Polytron TOP rel. VD07E, 8800 rel. 5.1, 8500 rel. 1.22 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8800/8500 Dual Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=SIEPOLY, Dmax=2.90, Contrast=12, Density=14 n on EIB Menu: Parity=Enable Odd, Timeout=10



Siemens Polytron TOP with Kodak DryView 8500 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB

Keypad

SPDI

Keypad


SiemensPolytron TOP

8500 Plus

3M 8700 DryView

FootswitchVideo cable for Footswitch

Requirements: Polytron TOP rel. VD07E, 8500 Plus rel. 1.22 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8500 Plus Setup: n on COMM Menu:







Siemens Polytron TOP with Kodak DryView 8500 LASER IMAGER / Standard


Keypad

SPDI


SiemensPolytron TOP

8500 Standard

3M8700 DryView

Requirements: Polytron TOP rel. VD07E, 8500 Standard rel. 1.22 8500 Standard Setup: n on TDB/C board:










8300 Dual

DEIB

Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM



UKEIB

Keypad

SPDI

Keypad


SiemensPolytron TOP

3M 8800Mul ti- Input Manager


Requirements: Polytron TOP rel. VD07E, 8800 rel. 5.1, 8300 rel. 4.2 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON 8300 Setup: n on 8300 Operator Menu set:




8800 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: Density=16, Contrast=10 n on EIB Menu: Parity=Enable Odd, Timeout=10



Siemens Polytron TOP with Kodak DryView 8300 LASER IMAGER / Standalone

Keypad

SPDI


SiemensPolytron TOP 8300


Requirements: Siemens Polytron TOP rel. VD07E, 8300 rel. 4.2 8300 Setup: n on 8300 Operator Menu set:


n on 8300 Service Menu set: n Serial Control Interface: Protocol=Keypad n Digital Interface: Parity=Odd n Modality Group=0



Siemens Polytron TOP with Kodak Digital Science 969 HQ LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M969 HQ

UKEIB

Keypad

SPDI

Keypad


SiemensPolytron TOP



Requirements: Polytron TOP rel. VD07E, M969 HQ rel. 5.1 Note: for Perivision (Long Leg) special Custom Formats must be loaded into Keypad Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON M969 HQ Setup: n on COMM Menu:






Siemens Polytron TOP with Kodak Digital Science 969 HQT LASER IMAGER

M969 HQT

Keypad

SPDI


SiemensPolytron TOP



Requirements: Polytron TOP rel. VD07E, M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 M969 HQT Setup: n on TDB/C board:








Siemens Polytron TOP with Kodak Digital Science 959 XL LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M959 XL

KEIB

XL Keypad

SPDI

Keypad


SiemensPolytron TOP


Footswitch


Requirements: Siemens Polytron TOP rel. VD07E, M959 XL rel. 3.8 Setup: n on XL Control Panel set Density & Contrast depending on chemistry n on KEIB set Jumper=RS422 n on XL Input Module install LUT 322A0 M959 XL Setup: n on COMM Menu:





Siemens Polytron TOP with Kodak DryView 8100 LASER IMAGER

Copper Cable

UKEIB

Keypad

SPDI

Keypad


SiemensPolytron TOP

DryView 8100

Imager

RS422 9-pole Plug


Requirements: Polytron TOP rel. VD07E, 8100 v1.1 Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=10, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=2 n on IMAGE QUALITY-> TFT FILES Menu: TFT=SIEPOLY n on LOCAL PANEL Menu: Contrast=12, Density=2.90 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Odd



Siemens Polytron TOP with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


DPCCopper Cable

DPI4 Cable

UKEIB

Keypad

SPDI

Keypad


Siemens Polytron TOP

8700 Plus

3M8700DryView

Fiber Cable

Fiber Cable

DPC-to-UKEIB Cable

9410 PACS Link


Requirements: Polytron TOP rel. VD07E, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for

8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers.

Note: a footswitch possibility is available Polytron TOP Setup: n press Shift F4 to enter in Service Mode n into the menu Install/Config.System/Image/HC Type n set SPDI to disable Footswitch or Remote SPDI to enable Footswitch Setup: n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center





on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=10, Parity=Odd, Memory=7 n Serial Port: Protocol=SuperSet, Parity=None, Baud Rate=19200

on Device Setup, IMS KEYPADS: n Kpad=polyTOP, Hosp=sms, Serial Port=DPI4 A KPAD, Image=DPI4 A DATA n Available Printers=8700, Film Destination=Processor, TFT/ULUT=Siepoly.w87 n into Defaults: Dest=8700, Size=14x17, C=10, D=13, Dmax=2.9, Bit=8 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60



Siemens Polytron TOP with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


DPCCopper Cable

DPI4 Cable

UKEIB

Keypad

SPDI

Keypad


SiemensPolytron TOP

DryView 8100

Control 9-pin

Data 37 pin

DPC-to-UKEIB Cable

9410 PACS Link


RS4229-pole Plug


Requirements: Polytron TOP rel. VD07E, 9410 v1.6, 8100 v2.4.1 Note: a footswitch possibility is available Polytron TOP Setup: n press Shift F4 to enter in Service Mode n into the menu Install/Config.System/Image/HC Type n set SPDI to disable Footswitch or Remote SPDI to enable Footswitch Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 9410 Setup:


on I/O CARD SETUP, DPI4 Digital Menu: n Image Data Port: Header, 8 bit, Timeout=10, Parity=Odd, Memory=7 n Serial Port: Protocol=SuperSet, Parity=None, Baud Rate=19200

on Device Setup, IMS KEYPADS: n Kpad=polyTOP, Hosp=sms, Serial Port=DPI4 A KPAD, Image=DPI4 A DATA



n Available Printers=8100, Film Destination=Processor, TFT/ULUT=Siepoly.w87 n into Defaults: Dest=8100, Size=14x17, C=10, D=13, Dmax=2.9, Bit=8



Siemens Polytron TOP with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Polytron TOP rel. VD07E Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: a footswitch possibility is available Footswitch adaptation pinout: Siemens Coaxial Video cable Coaxial Video side central

pin extern shield

to coax-to-RJ-connector pinout

RJ connector side viewed as you would

insert the RJ plug into your mouth, with the

click up

Very left ! ! ! ! !

Middle right ! ! ! ! !

Polytron TOP Setup: - press Shift F4 to enter in Service Mode - into the menu Install/Config.System/Image/HC Type - set SPDI to disable Footswitch or Remote SPDI to enable Footswitch MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input, Direct Conn,Config.Add, Digital,Qual=Polytron/Multistar TOP:

n Board/Channel=Digital Board 1 Channel 1, Logical Name= ptop, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off


n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear)


Kodak MIM 200

SiemensPolytron TOP

SPDI

Kodak 160 camera




Keypad



n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:








Requirements: Polytron TOP rel. VD07E Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: a footswitch possibility is available Footswitch adaptation pinout: Siemens Coaxial Video cable Coaxial Video side central

pin extern shield




click up

Very left ! ! ! ! !


Polytron TOP Setup: - press Shift F4 to enter in Service Mode - into the menu Install/Config.System/Image/HC Type - set SPDI to disable Footswitch or Remote SPDI to enable Footswitch MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input, Direct Conn,Config.Add, Digital,Qual=Polytron/Multistar TOP: n Board/Channel=Digital Board 1 Channel 1, Logical Name= ptop, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue)


Kodak MIM 200

SiemensPolytron TOP

SPDI

Kodak 2180 camera



Keypad

Fiber Cable



n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2

n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination= KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:







Kodak Ektascan 1120 LASER PRINTER Siemens Polytron TOP with Kodak MIM 200 / KELP 1120

Requirements: Polytron TOP rel. VD07E Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: a footswitch possibility is available Footswitch adaptation pinout: Siemens Coaxial Video cable Coaxial Video side central

pin extern shield




click up

Very left ! ! ! ! !


Polytron TOP Setup: - press Shift F4 to enter in Service Mode - into the menu Install/Config.System/Image/HC Type - set SPDI to disable Footswitch or Remote SPDI to enable Footswitch MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input, Direct Conn,Config.Add, Digital,Qual=Polytron/Multistar TOP: n Board/Channel=Digital Board 1 Channel 1, Logical Name= ptop, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue)


Kodak MIM 200

SiemensPolytron TOP

SPDI

Kodak 1120 camera



Keypad

Fiber Cable



n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8

n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination= KELP 1120, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:








Requirements: Polytron TOP rel. VD07E Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for

8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM 200 Destinations

Note: a footswitch possibility is available Footswitch adaptation pinout: Siemens Coaxial Video cable Coaxial Video side central

pin extern shield




click up

Very left ! ! ! ! !


Polytron TOP Setup: - press Shift F4 to enter in Service Mode - into the menu Install/Config.System/Image/HC Type - set SPDI to disable Footswitch or Remote SPDI to enable Footswitch MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config,Input, Direct Conn,Config.Add, Digital,Qual=Polytron/Multistar TOP: n Board/Channel=Digital Board 1 Channel 1, Logical Name= ptop, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set:

Keypad

Kodak MIM 200


Fiber Cable

Fiber Cable

3M 8700DryView


SPDI



SiemensPolytron TOP



n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=11, Film Contrast=10 n Image Dmax=2.90, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Siepoly.w87, Auto Study=Off, Console=On, Annotation=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60





Requirements: Polytron TOP rel. VD07E Requirements: MIM200 v6.1, 8100 v2.4.1 Note: a footswitch possibility is available Footswitch adaptation pinout: Siemens Coaxial Video cable Coaxial Video side central

pin extern shield




click up

Very left ! ! ! ! !


Polytron TOP Setup: - press Shift F4 to enter in Service Mode - into the menu Install/Config.System/Image/HC Type - set SPDI to disable Footswitch or Remote SPDI to enable Footswitch MIM200 Setup: n on Configure, Network:


n on Config., Input, Direct Connect, Conf.Add, Dig.,Qual.=Polytron/Multistar TOP: n Board/Channel=Digital Board 1 Channel 1, Logical Name= ptop, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=884, Lines=884, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:

KeypadSiemensPolytron TOP

Kodak MIM 200



Control 9-pin

Data 37 pin

RS4229-pole Plug

Kodak DryView8100

SPDI



Siemens CoaxialVideoCable for Footswitch

Coaxial-to-RJ-connectorFootswitch Adaptor Cable



n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=11, Film Contrast=10 n Image Dmax=2.90, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Siepoly.w87, Auto Study=Off, Console=On, Annotation=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even

Siemens Mammography Digiscan M (Acquisition Console) with LASER IMAGER Products

Author: [email protected], Edition: November ´04 1

Setup for Siemens Mammography Digiscan M with LASER IMAGERS (old Siemens modality, no more in production)

Siemens Digiscan M (Acquisition Console) Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8610 LASER IMAGER (see also 8600) .................................................................................................................. 2

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGER (see also 8600) (1) ............................................................................................................. 4

n Kodak DryView 8900 LASER IMAGER with Mammography Accessory.......................... 6

1 Setup valid also for Kodak PACS LINK 25 PRINT SERVER.



Siemens Digiscan M (Acquisition Console) via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600)

Requirements: Digiscan M syngo platform VC20B Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by syngo, linear-in-Density LUT into Camera Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=PL9410, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8610, Host Sel.=PL9410, AE Title=9410, Port=1024

press button Save and then press button Verification step 3: HC Device=k8610, Type=DICOM Printer, Class=kodak8610,

DICOM Node= dv8610, Pixel Size=39x39, select Film Sheet Formats Portrait: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=5024x6200, select Film Sheet Formats Landscape: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=6200x5024, Medium Type=Blue Film, Film Destination=Processor, Color Appearance=monochrome, Background=black, Transformation=no magnification, press button Save

- on syngo into Local Service/Config/DICOM LUT files syngo configured with DXMG Image=CR, Max Density=3.50 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case setup used Dmax=350, C=6, Modality Group=1

9410 Setup:

n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5

Siemens Mammomat 3000 NovaDigiscan M CR-readersyngo platformOperator Console

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin




n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=6 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

n on LOCAL PRINTER Menu: n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=90, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=6, Border Density=0

8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:

n Imager=2.4, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, Contrast=6.G.7, Conv.Kernel=1.0.5)

n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma= Linear OD, Image Size=Scale To Fit, Detector Size=don’t care

n on 8610 Service Menu into Configure User set: n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1



Siemens Digiscan M (Acquisition Console) via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Digiscan M syngo platform VC20B Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by syngo, linear-in-Density LUT into Camera Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=MIM, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8610, Host Sel.=MIM, AE Title=8610, Port=5040



- on syngo into Local Service/Config/DICOM LUT files syngo configured with DXMG Image=CR, Max Density=3.50 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case setup used Dmax=350, C=1, Modality Group=1



Kodak DryView 8610

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200



n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=6 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=digm n Print Priority=Normal (Always=N), Border=Black (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:


n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care



Siemens Digiscan M (Acquisition Console) via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: Digiscan M syngo platform VC20B Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8900, Host Sel.=dv8900, AE Title=8900, Port=5040

press button Save and then press button Verification step 3: HC Device=8900, Type=DICOM Printer,

Class= kodak8900HiRes_smallB (or kodak8610), DICOM Node= k8900, Pixel Size=39x39, select Film Sheet Formats Portrait: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=5056x6368, select Film Sheet Formats Landscape: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=6368x5056, Medium Type=Blue Film, Film Destination=Processor, Color Appearance=monochrome, Background=black, Transformation=no magnification, press button Save

- on syngo into Local Service/Config/DICOM LUT files syngo configured with DXMG Image=CR, Max Density=3.50 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case setup used Dmax=350, C=1, TFT=Wrkstn2a


n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr= accordingly

n on Configuration, System, Software License: n License Status=Mammo Key is ON


DICOM Network

Kodak DryView 8900





n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (Always=N), Contrast=1 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws

Siemens Mammography MagicView 1000 (Review Console) with LASER IMAGER Products


Setup for Siemens Mammography MagicView 1000 with LASER IMAGERS (old Siemens modality, no more in production) Siemens MagicView 1000 (Review Console) Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGER (see also 8600) .................................................................................................................. 5




Siemens MagicView 1000 (Review Console) via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: MagicView 1000 rel.VB33 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by MagicView, linear-in-Density LUT into Camera MagicView Setup (using 8600 Config.File): - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8610 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8600_Dicom, - DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8600_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView To verify True Size on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set:

Segment Type=anatomical, Scale=ON To eliminate white bands on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set:

Background R=0, G=0, B=0 MagicView Setup to print images with Dmax=350:

Siemens Mammomat 3000 NovaMagicView 1000 platformReview Console

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin




- into Service Login (at Unix level), edit density.dat file and set 350 Dmax value for digital-mammo images ie

cd /home/cs_root/data/lut vi density.dat change the following 6 lines as follows:

0 DX 350 0 CR 350 0 MG 350 0 CT 350 (this line needed when Ref.Test Patterns eg SMPTE are used) 0 OT 350 0 DEFAULT 350

reboot MagicView MagicView Setup to print with Image Data lutted by MV, not lutted by 8610 (setup: Gamma=Lin.in Density, C=6, Modality Group=1): - into Service Login (at Unix level),

edit LUT^CR.def file and modify it with following exp / density value pairs ie cd /home/cs_root/data/lut vi LUT^CR.def change the lines as follows: 0 20 25 31 51 42 76 56 102 73 127 93 153 115 178 143 204 182 229 230 255 300 copy LUT^CR.def file into the LUT^CT.def, LUT^MG.def and LUT^DX.def files (ie LUT^CR.def is the file with LUT applied by MV to image data and is copied into LUT^CT.def, LUT^MG.def and LUT^DX.def to be sure to have same LUT applied by MV to image data no matter which Modality-tag have the image data) ie cd /home/cs_root/data/lut cp LUT^CR.def LUT^CT.def (needed when Ref. Test Patterns eg SMPTE used) cp LUT^CR.def LUT^MG.def cp LUT^CR.def LUT^DX.def reboot MagicView



9410 Setup: n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr= accordingly n SCP=8610, Copies=1, Contrast Table=6 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma=Linear OD, Image Size=Scale To Fit, Detector Size= don’t care




Siemens MagicView 1000 (Review Console) via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: MagicView 1000 rel.VB33 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by MagicView, linear-in-Density LUT into Camera MagicView Setup (using 8600 Config.File): - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8610 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8600_Dicom, - DICOM services=PRINT_SCP, aet=8610, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8600_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView To verify True Size on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set:


Background R=0, G=0, B=0 MagicView Setup to print images with Dmax=350:


Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin




- into Service Login (at Unix level), edit density.dat file and set 350 Dmax value for digital-mammo images ie





MIM200 Setup:



n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly

n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set:

n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Mem=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600),Header/Line,Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=6 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=nova n Print Priority=Normal (Always=N), Border=Black (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:


n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1:1P



n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care n on 8610 Service Menu into Configure User set:

n Ratio=1.00, Serial Control Intf.=1200,8,1,Even,Comma,3M, Memory=255 n Digital Interface: Parity=Even, Modality Group=1, Smoothing Group=1



Siemens MagicView 1000 (Review Console) via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: MagicView 1000 rel.VB33 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) MagicView Setup (using 3M M969 HQ Config.file, easier configuration): - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8900 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_M969_HQ_Dicom, - DICOM services=PRINT_SCP, aet=8900, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_M969_HQ_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView - note: into 8900 Config., DICOM SCP, SCP Services, set Smoothing=0 (Always=Y) MagicView Setup (creating 8900 by modifying files, only if True Size needed): - into Service Login (at Unix level) in /home/cs_root/data/camera directory

dbp_format.dat and dbp_camera_types.dat files needs to be edited by adding the DV8900 matrixes ie cd /home/cs_root/data/camera vi dbp_format.dat add the following lines:

Kodak_DryView_8900_Hires_Dicom 14x17 350.75x427.03 8976x10928 650 Kodak_DryView_8900_Hires_Dicom 14x14 350.75x350.75 8976x8976 650 Kodak_DryView_8900_Hires_Dicom 11x14 274.63x350.75 7028x8976 650 Kodak_DryView_8900_Hires_Dicom 10x12 248.84x299.17 6368x7656 650 Kodak_DryView_8900_Hires_Dicom 8x10 197.57x248.84 5056x6368 650

DICOM Network

Kodak DryView 8900




cd /home/cs_root/data/camera vi dbp_camera_types.dat add the following line:

Kodak_DryView_8900_ Hires_Dicom - reboot MagicView - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8900 Dicom Printer, - modality type=DICOM_PRINTER, - camera type=Kodak_DryView_8900_ Hires_Dicom, - DICOM services=PRINT_SCP, aet=8900, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter nbr of printer to install eg 1=kodakd Kodak_DryView_8900_ Hires_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView - at this point only a default-Layout ie printing format is available for 8900 - other Layouts ie other printing formats could be manually genarated

by using the Layout-Editor which is present inside MagicView application - otherwise other Layouts ie other printing formats could be automatically

generated deriving them from the Layouts of an already existing camera - to automatic generate other Layouts ie other printing formats

from main menu do: hc_install/modify/copy layouts input=Kodak_KELP_2180_Dicom output=Kodak_DryView_8900_ Hires_Dicom

- reboot MagicView To verify True Size on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set:


Background R=0, G=0, B=0 MagicView Setup to print images with Dmax=350: - into Service Login (at Unix level),

edit density.dat file and set 350 Dmax value for digital-mammo images ie





reboot MagicView MagicView Setup to print with Image Data lutted by MV, not lutted by 8900 (setup: C=1, TFT=Wrkstn2a): - into Service Login (at Unix level),

edit LUT^CR.def file and modify it with following exp / density value pairs ie cd /home/cs_root/data/lut vi LUT^CR.def change the lines as follows: 2 20 27 31 53 42 78 56 104 73 129 93 155 115 180 143 206 182 231 230 255 300 copy LUT^CR.def file into LUT^CT.def, LUT^MG.def and LUT^DX.def files (ie LUT^CR.def is the file with LUT applied by MV to image data and is copied into LUT^CT.def, LUT^MG.def and LUT^DX.def to be sure to have same LUT applied by MV to image data no matter which Modality-tag have the image data) ie cd /home/cs_root/data/lut cp LUT^CR.def LUT^CT.def (needed when Ref. Test Patterns eg SMPTE used) cp LUT^CR.def LUT^MG.def cp LUT^CR.def LUT^DX.def reboot MagicView




n on Configuration, DICOM SCP, Communications:




n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (Always=N), Contrast=1 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws

Siemens Mammography Novation DR (Acq.Console) DROC platform with LASER IMAGER Products


Setup for Siemens Mammography Novation DR (Acquisition Console) DROC platform with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) .................................................................................................................. 2

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ............................................................................................................. 4





Novation DR (Acquisition Console) DROC platform via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Novation DROC platform MAMMODROC v3_0_0_15 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens DROC Setup: n Log as Service n into Service Tools under Service Shortcut menu select Add New Output Device n here Browse Directory ./installable/vdevices/output/laser_cameras n here Install the Kodak DV8610 laser imager connected via Kodak PL MIM200 n here select Return to updated Software Configuration Page n here click on Service Tools n into Service Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit Kodak 8610 connected via MIM200 (aliased to Kodak DryView 8610) n ALIAS NAME=Kodak 8610, n EXPLICIT_INSTALL=TRUE, SERVER ACTIVE=FALSE n click Update n click on Service Tools n into Service Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit the Kodak DV8610 connected via MIM200 (aliased to Kodak 8610) n here Edit configuration file /linx_mp/resources/installed/raw/

vdevdryview8610_001/dryview8610.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DRYVIEW, n device name (ie Aetitle)=9410,

Kodak DryView 8610

DICOM Network

Control 9 pin

Data 37 pin


Siemens mammography Mammomat Novation DRAcquisition WorkStationDROC platform




n device address (ie IPaddr : Port)= eg 150.224.150.22:1024 n request annotation SOP class=false, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n photometric interpr.=automatic, copies=1, medium type=BLUE FILM, n film destination=PROCESSOR, film session label=DROC film, n memory allocation=0, Print priority=MED, n available image display formats=PORTRAIT\1,1 n image display format=PORTRAIT\1,1, annotation display format id=6 n number of annotation boxes=6, annotation boxes per text line=3 n max annotation box text string size=64, annotation string= n max text line size=189, number of image text lines=5, image text position=left n image text overlap=overwrite, image text reorient=reorient_0 n film size id=8INX10IN, n film magnification type=REPLICATE, film smoothing type=NONE, n border density=BLACK, empty image density=BLACK, full pixel range=true, n min density=20, max density=350, configuration info= LUT=0,5, trim=NO, n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type= REPLICATE, image smoothing type= NONE, n true size capable=true, pixel size=70, pad=false, image text line 1 till 5= n annotation position=1 till 6, text string=<off>, n width=2781, height=3430 n click Update, click Return to Updated Installation page, click on Service Tools n (note if any parameter changed, click on Update and reboot DROC to be effective) n Log as Application n into Edit/Outputs/New input the output name Kodak DryView 8610, click OK n select Kodak DryView 8610 and click Edit n select laser_cameras tab, select Kodak 8610, click Add, click Accept, click OK n to print select Admin/Spool Management/Patient and select Outputs=Kodak 8610 9410 Setup:

n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=5 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

n on LOCAL PRINTER Menu: n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=90, Transfer Rate=2 MHz



n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=6, Border Density=0







Novation DR (Acquisition Console) DROC platform via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Novation DROC platform MAMMODROC v3_0_0_15 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens DROC Setup: n Log as Service n into Service Tools under Service Shortcut menu select Add New Output Device n here Browse Directory ./installable/vdevices/output/laser_cameras n here Install the Kodak DV8610 laser imager connected via Kodak PL MIM200 n here select Return to updated Software Configuration Page n here click on Service Tools n into Service Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit Kodak 8610 connected via MIM200 (aliased to Kodak DryView 8610) n ALIAS NAME=Kodak 8610, n EXPLICIT_INSTALL=TRUE, SERVER ACTIVE=FALSE n click Update n click on Service Tools n into Service Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit the Kodak DV8610 connected via MIM200 (aliased to Kodak 8610) n here Edit configuration file /linx_mp/resources/installed/raw/

vdevdryview8610_001/dryview8610.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DRYVIEW, n device name (ie Aetitle)=8610,

Kodak DryView 8610

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200




n device address (ie IPaddr : Port)= eg 150.224.150.22:5040 n request annotation SOP class=false, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file= n photometric interpr.=automatic, copies=1, medium type=BLUE FILM, n film destination=PROCESSOR, film session label=DROC film, n memory allocation=0, Print priority=MED, n available image display formats=PORTRAIT\1,1 n image display format=PORTRAIT\1,1, annotation display format id=6 n number of annotation boxes=6, annotation boxes per text line=3 n max annotation box text string size=64, annotation string= n max text line size=189, number of image text lines=5, image text position=left n image text overlap=overwrite, image text reorient=reorient_0 n film size id=8INX10IN, n film magnification type=REPLICATE, film smoothing type=NONE, n border density=BLACK, empty image density=BLACK, full pixel range=true, n min density=20, max density=350, configuration info= LUT=0,5, trim=NO, n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type= REPLICATE, image smoothing type= NONE, n true size capable=true, pixel size=70, pad=false, image text line 1 till 5= n annotation position=1 till 6, text string=<off>, n width=2781, height=3430 n click Update, click Return to Updated Installation page, click on Service Tools n (note if any parameter changed, click on Update and reboot DROC to be effective) n Log as Application n into Edit/Outputs/New input the output name Kodak DryView 8610, click OK n select Kodak DryView 8610 and click Edit n select laser_cameras tab, select Kodak 8610, click Add, click Accept, click OK n to print select Admin/Spool Management/Patient and select Outputs=Kodak 8610 MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On



n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n Contrast (dry)=5 (Always=N) n Modality Group=1 (which corresponds to TFT/ULUT=upmsv3kp.w8u) n Conv.Group=1, Gamma Table=Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=droc n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:






Novation DR (Acquisition Console) DROC platform via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: Novation DROC platform MAMMODROC v3_0_0_15 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens DROC Setup: n Log as Service n into Service Tools under Service Shortcut menu select Add New Output Device n here Browse Directory ./installable/vdevices/output/laser_cameras n here Install the Kodak DV8610 laser imager connected via Kodak PL MIM200 n here select Return to updated Software Configuration Page n here click on Service Tools n into Servic e Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit Kodak 8610 connected via MIM200 (aliased to Kodak DryView 8610) n ALIAS NAME=Kodak 8900, n EXPLICIT_INSTALL=TRUE, SERVER ACTIVE=FALSE n click Update n click on Service Tools n into Service Tools under Service Shortcut menu select Configure Output Devices n here Browse Directory ./ installed/vdevices/output/laser_cameras n here Edit the Kodak DV8610 connected via MIM200 (aliased to Kodak 8900) n here Edit configuration file /linx_mp/resources/installed/raw/

vdevdryview8610_001/dryview8610.cfg n factory object name=supplied by system, spooler name=DicomPrintSpooler, n priority=normal, max retries=20, device type=DRYVIEW, n device name (ie Aetitle)=8900, n device address (ie IPaddr : Port)= eg 150.224.150.22:5040 n request annotation SOP class=false, request print job SOP class=false, n print job poll period=15, print job timeout=300, printer poll period=15, n association timeout=0, collate=false, custom lut file=

DICOM Network

Kodak DryView 8900




n photometric interpr.=automatic, copies=1, medium type=BLUE FILM, n film destination=PROCESSOR, film session label=DROC film, n memory allocation=0, Print priority=MED, n available image display formats=PORTRAIT\1,1 n image display format=PORTRAIT\1,1, annotation display format id=6 n number of annotation boxes=6, annotation boxes per text line=3 n max annotation box text string size=64, annotation string= n max text line size=189, number of image text lines=5, image text position=left n image text overlap=overwrite, image text reorient=reorient_0 n film size id=automatic, n film magnification type=REPLICATE, film smoothing type=NONE, n border density=BLACK, empty image density=BLACK, full pixel range=true, n min density=20, max density=350, trim=NO, n configuration info=LUT=Wrkstn2a.w87,1 n polarity=NORMAL, available image mag.types=REPLICATE BILINEAR CUBIC n image mag.type= REPLICATE, image smoothing type= NONE, n true size capable=true, pixel size=70, pad=false, image text line 1 till 5= n annotation position=1 till 6, text string=<off>, n width=3337, height=4114 n click Update, click Return to Updated Installation page, click on Service Tools n (note if any parameter changed, click on Update and reboot DROC to be effective) n Log as Application n into Edit/Outputs/New input the output name Kodak DryView 8900, click OK n select Kodak DryView 8900 and click Edit n select laser_cameras tab, select Kodak 8900, click Add, click Accept, click OK n to print select Admin/Spool Management/Patient and select Outputs=Kodak 8900 8900 Setup: n on Configuration, System, Network:



n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On



n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=Wrkstn2a.w87 (Always=N), Contrast=1 (Always=N) n Smoothing Type=15 (Always=N), Image Dmin=0.00 (Always=N), n Image Dmax=3.50 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws

Siemens Mammography Novation DR Women’s Health Acquisition WorkStation with LASER IMAGER Products


Setup for Siemens Mammography Novation DR (Acquisition Console) WH-AWS syngo platform with LASER IMAGERS Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGER (see also 8600) (1) ............................................................................................................. 4





Novation DR Women’s Health Acquisition WorkStation via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: WH-AWS VA10A Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=PL9410, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8610, Host Sel.=PL9410, AE Title=9410, Port=1024



- on syngo into Local Service/Config/DICOM LUT files syngo configured with DXMG Image=CR, Max Density=3.50 then Image Data lutted by syngo, linear-in-Density LUT into Camera

9410 Setup:

n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=6

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin


Siemens mammographyMammomat Novation DR Women’s HealthAcquisition WorkStationsyngo platform



n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0








Novation DR Women’s Health Acquisition WorkStation via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: WH-AWS VA10A Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=MIM, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=dv8610, Host Sel.=MIM, AE Title=8610, Port=5040





Kodak DryView 8610

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200




n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=6 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=ws n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:






Novation DR Women’s Health Acquisition WorkStation via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: WH-AWS VA10A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Siemens syngo Setup: - on syngo into Local Service/Config/print devices declare: step 1: Host Name=dv8900, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k8900, Host Sel.=dv8900, AE Title=8900, Port=5040

press button Save and then press button Verification step 3: HC Device=8900, Type=DICOM Printer,

Class= kodak8900HiRes_smallB (or kodak8610), DICOM Node= k8900, Pixel Size=39x39, select Film Sheet Formats Portrait: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=5056x6368, select Film Sheet Formats Landscape: Inch8x10, it appears Film Sheet Format=Inch8x10, Nbr.Pixel (cols,rows)=6368x5056, Medium Type=Blue Film, Film Destination=Processor, Color Appearance=monochrome, Background=black, Transformation=no magnification, press button Save






n on Configuration, Destination:

DICOM Network

Kodak DryView 8900




n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=Wrkstn2a.w87 (Always=N), Contrast=1 (Always=N) n Smoothing Type=5 (Always=N), Image Dmin=0.00 (Always=N), n Image Dmax=3.50 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws

Siemens Mammography Opdima with LASER IMAGER Products


Setup for Siemens Mammography Opdima with LASER IMAGERS (old Siemens modality, no more in production) Siemens Opdima Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /







Siemens Opdima via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Opdima v3.1 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data not lutted by Opdima, lutted by Camera Siemens Opdima Setup: - under Service/Advanced Service/Network Setup/DICOM Nodes/Add: - Node Name=Kodak, AEtitle=9410, Host Name=9410MFG01, - IPaddr=accordingly, Port=1024, Printer=selected 9410 Setup:

n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=3 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma=Linear in Transmittance, Contrast Group=6, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

n on LOCAL PRINTER Menu: n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831

Siemens Opdima workstation

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin




n Interp Num=1, Installed TFT/ULUT= don’t care n Max.Density=350, Contrast=3, Border Density=0



n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care




Siemens Opdima via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Opdima v3.1 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data not lutted by Opdima, lutted by Camera Siemens Opdima Setup: - under Service/Advanced Service/Network Setup/DICOM Nodes/Add: - Node Name=Kodak, AEtitle=8610, Host Name=MIM, - IPaddr=accordingly, Port=5040, Printer=selected MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On


Kodak DryView 8610

DICOM Network

Control 9 pin

Data 37 pin


Kodak MIM 200



n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n Contrast (dry)=3 (Always=N) n Modality Group=6 (which corresponds to TFT/ULUT=gsdfaa0p.w8u) n Conv.Group=1, Gamma Table=Linear in Transmittance n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=ws n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:


n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1 n Gamma=Xmittance, Image Size=Scale To Fit, Detector Size=don’t care




Siemens Opdima via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: Opdima v3.1 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Image Data not lutted by Opdima, lutted by Camera Siemens Opdima Setup: - under Service/Advanced Service/Network Setup/DICOM Nodes/Add: - Node Name=Kodak, AEtitle=8900, Host Name=DV8900, - IPaddr=accordingly, Port=5040, Printer=selected 8900 Setup: n on Configuration, System, Network:


n on Configuration, System, Software License: n License Status=Mammo Key is ON n on Configuration, DICOM SCP, Communications:


n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On,


DICOM Network

Kodak DryView 8900



n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=gsdfaa0p.w8u (Always=N), Contrast=3 (Always=N) n Smoothing Type=15 (Always=N), Image Dmin=0.00 (Always=N), n Image Dmax=3.50 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=ws

Siemens Mammography Mammo Report Plus (Review Console) with LASER IMAGER Products


Setup for Siemens Mammography Mammo Report Plus with LASER IMAGERS Siemens Mammo Report Plus (Review Console) Connection via DICOM: n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /







Siemens Mammo Report Plus (Review Console) via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Requirements: Mammo Report Plus VA20 Requirements: 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: in sw VA20 Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens Mammo Report Plus Setup: - login as Service - into Administration / DICOM / Setup / DICOM Setup set: - Entity Type: Printer=On, AEtitle=9410, IPaddr=accordingly, Port=1024 - into Administration / DICOM / Printer set: - Printer Name=Kodak 8610, Dmax=350 - Printer Setup: Config.Info=LUT=0,5 - Portrait matrix (Columns x Rows)=5024 x 6200 - Landscape matrix (Columns x Rows)=6200 x 5024 - Graylevel 16(12)=On (Off if 8600), 8=Off (On if 8600) - Medium=Blue Film, Medium Size=8INX10IN 9410 Setup:

n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations= 5 n on SCP PRINTER Menu, Registered User: n SCU AETitle= accordingly, SCU IPAddr= accordingly n SCP=8610, Copies=1, Contrast Table=5 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=Yes, N-Event Printer=No

Siemens Mammomat 3000 NovaMammo Report PlusReview Console

Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin








n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma Table= Xmittance, Image Size=Scale To Fit n Detector Size= don’t care




Siemens Mammo Report Plus (Review Console) via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: Mammo Report Plus VA20 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: in sw VA20 Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens Mammo Report Plus Setup: - login as Service - into Administration / DICOM / Setup / DICOM Setup set: - Entity Type: Printer=On, AEtitle=8610, IPaddr=accordingly, Port=5040 - into Administration / DICOM / Printer set: - Printer Name=Kodak 8610, Dmax=350 - Printer Setup: Config.Info=LUT=0,5 - Portrait matrix (Columns x Rows)=5024 x 6200 - Landscape matrix (Columns x Rows)=6200 x 5024 - Graylevel 16(12)=On (Off if 8600), 8=Off (On if 8600) - Medium=Blue Film, Medium Size=8INX10IN MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database Name=8610 (or 8600), Model=8610 (or 8600), Memory=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue


Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin




n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600), Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y), Contrast (dry)=5 (Always=N), n Modality Group=1 (which corresponds to TFT/ULUT=upmsv3kp.w8u), n Conv.Group=1, Gamma Table= Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=rplus n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:


n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma= Xmittance, Image Size=Scale To Fit, Detector Size= don’t care




Siemens Mammo Report Plus (Review Console) via DICOM with Kodak DryView 8900 LASER IMAGER with Mammography Accessory

Requirements: Mammo Report Plus VA20 Requirements: 8900 rev.E ie release 2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: in sw VA20 Image Data lutted by Siemens, linear-in-Density LUT into Camera Siemens Mammo Report Plus Setup: - login as Service - into Administration / DICOM / Setup / DICOM Setup set: - Entity Type: Printer=On, AEtitle=8900, IPaddr=accordingly, Port=5040 - into Administration / DICOM / Printer set: - Printer Name=Kodak 8900, Dmax=350 - Printer Setup: Config.Info= LUT=Wrkstn2a.w87,1 - Printer Setup: Portrait matrix (Columns x Rows)=5056 x 6368 (for 8x10) - Printer Setup: Landscape matrix (Columns x Rows)=6368 x 5056 (for 8x10) - Printer Setup: Medium=Blue Film, Medium Size=8INx10IN - Printer Setup: Graylevel 16(12)=On, 8=Off - Printer Setup: Portrait matrix (Columns x Rows)=6368 x 7656 (for 10x12) - Printer Setup: Landscape matrix (Columns x Rows)=7656 x 6368 (for 10x12) - Printer Setup: Medium=Blue Film, Medium Size=10INx12IN 8900 Setup: n on Configuration, System, Network:




n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any

DICOM Network

Kodak DryView 8900




n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT=Wrkstn2a.w87 (Always=N), Contrast=1 (Always=N) n Smoothing Type=0 (Always=N), Image Polarity=Normal (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Mammo Blue Film (Always=Y) n Film Size=8INx10IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=ws

Siemens MR platform Numaris 4, based on syngo with LASER IMAGER Products


Setup for Siemens MR Harmony / Symphony / Sonata / Rhapsody / Concerto / Trio / Allegra / Avanto / Espree with LASER IMAGERS

Important note: from mid 2000 MR models Harmony/Symphony/Sonata switched to the Numaris 4 syngo-based platform. Here you find Harmony/Symphony/Sonata syngo-based setup

Connection via DICOM: n Kodak DryView 8300 LASER IMAGER..................................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER .................................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1)............. 4 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8100 LASER IMAGER (1)................................................................................ 6 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8300 LASER IMAGER (1)................................................................................ 8 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 160 LASER IMAGER (2,3,4) ............................................................................. 10 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 2180 LASER PRINTER (2,3,4) .......................................................................... 12 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak Ektascan 1120 LASER PRINTER (2,3,4) .......................................................................... 14 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8200 LASER IMAGER (3,4,5)............................................................................ 16 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4,5) ......... 18 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8100 LASER IMAGER (4,5)....................................................................... 20 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /

Kodak DryView 8300 LASER IMAGER (4,5)....................................................................... 22 n Kodak DryView 8900 LASER IMAGER..................................................................................... 24 n Kodak DryView 8150 LASER IMAGER..................................................................................... 26 n Kodak Color Medical Imager 1000............................................................................................. 28

1 Setup valid also for Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.3 and v1.5.1. 2 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v3.2.1. 3 Setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v4.0. 4 setup valid also for Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v5.0, v5.2, v6.0. 5 setup valid also for Kodak PACS LINK 25 PRINT SERVER



MR based on syngo via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens MR- Harmony/Symphony/Sonata- Rhapsody/ConcertoNumaris 4 syngo platform

Kodak DryView 8300

DICOM Network

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00


b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4



n into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00




MR based on syngo via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00

if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use use Dmax=300, Curve Shape=3.0, Film Contrast=0 (use this config. in case also a Virtuoso workstation is printing on same camera)

b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0




190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=a) 3.0 or b) 0.0, Contrast=0 n Contrast Pivot Density=1.2, IPAddress=accordingly n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



MR based on syngo via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers and if HQ by installing HQ into syngo DICOM Camera Config.File.

Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00

if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSV3K

b) into Local Service/Config/DICOM LUT files set MR Image=MR1, MaxDens=3.00 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A




9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber



n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 9 or b) 2 n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00

if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use Dmax=300, C=9, TFT=PMSB





9410 Setup:





on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=a) 9 or b) 2 n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00











n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 10 or b) 1 n TFT/ULUT=a) u1_109b.w8u or b) wrkstn2a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




MR based on syngo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00

if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use use Dmax=300, Curve Shape=434 (i.e., 3.0), Film Contrast=0







n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160



n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7








DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00

if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use use Dmax=300, Curve Shape=3.0, Film Contrast=0













DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00

if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use use Dmax=300, Curve Shape=3.0, Film Contrast=0







n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly



n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7








Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00

if LUT=linear then Image Data not lutted by syngo, lutted by Camera in this case use use Dmax=300, C=9, TFT=PMSB









n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +9 or b) +2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination and if HQ by installing HQ into syngo DICOM Camera Config.File.

Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00









n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00











n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off









DICOM Network

Control 9 pin

Data 37 pin


Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear , MaxDens=3.00













n on Admin, Update SCU Connection Database, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) u1_109b.w8u or b) wrkstn2a.w8u (Always=Y) n Contrast (dry)=a) 10 or b) 1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off





Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) into Local Service/Config/DICOM LUT files set MR Image=linear, MaxDens=3.00





- into Local Service/Config/DICOM LUT files set MR Image=a) linear or b) MR1, Max Density=3.00



DICOM Network

Kodak DryView 8900

Siemens MR- Harmony/Symphony/Sonata- Rhapsody/Concerto- Trio/Allegra/AvantoNumaris 4 syngo platform





n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 9 or b) 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mr




Requirements: MREase VA21B and VA25D, for the model Avanto VB11A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) in Local Service/Config/DICOM LUT files set MR Image=linear,MaxDens=3.0








n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any

Siemens MR- Harmony/Symphony/Sonata- Rhapsody/Concerto- Trio/Allegra/AvantoNumaris 4 syngo platform

DICOM Network

Kodak DryView 8150



n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 9 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=mr



MR based on syngo via DICOM with Kodak Color Medical Imager 1000

Requirements: MREase VA21B and VA25D and VB11A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=MR1 a) in Local Service/Config/DICOM LUT files set MR Image=linear


b) into Local Service/Config/DICOM LUT files set MR Image=MR1 if LUT=MR1 then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=7, TFT=WRKSTN2A





DICOM Network

Kodak CMI 1000

Siemens MR- Harmony/Symphony/Sonata- Rhapsody/Concerto- Trio/Allegra/Avanto/EspreeNumaris 4 syngo platform






n Contrast=a) 9 or b) 7 (Always=Y) n TFT Set (From list)=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Siemens MR Jazz with LASER IMAGER Products


Setup for Siemens MR Jazz with LASER IMAGERS Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER /



Kodak DryView 8300 LASER IMAGER / Dual Printer.................................................. 9 n Kodak DryView 8300 LASER IMAGER / Standalone.................................................... 10 n Kodak Digital Science 969 HQ LASER IMAGER...................................................... 11 n Kodak Digital Science 969 HQT LASER IMAGER ................................................... 12 n Kodak Digital Science 959 XL LASER IMAGER ...................................................... 13 n Kodak DryView 8100 LASER IMAGER......................................................................... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (not ok, image transfer incompatibility)

n Kodak PACS LINK 9410 ACQUISITION SYSTEM / Kodak DryView 8100 LASER IMAGER (not ok, image transfer incompatibility)




n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) . 21

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4).................................................................... 23



Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 25 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 26 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /







Kodak DryView 8200 LASER IMAGER (3,4,5)................................................................ 39 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /







Siemens MR Magnetom Jazz with Kodak DryView 8800 MULTI-INPUT MANAGER /


DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB

Keypad

Digital Board Data output

Keypad

Data Cable 37-pin

Siemens Magnetom Jazz MR


3M 8700 DryView

3M8800Multi-In

putManag

er

Requirements: Magnetom Jazz rel. VA12A, 8800 rel. 5.1, 8700 rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set:

with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd

Note: on MR in case of image acquisition error try to reset the MR Digital Board by entering in Menu: Help->Exposure: Reset Dig. Prn.

To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8800/8700 Dual Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Siemens MR Magnetom Jazz with Kodak DryView 8700 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB

Keypad


Keypad

Data Cable 37-pin


8700 Plus

3M 8700 DryView

Requirements: Siemens Magnetom Jazz rel. VA12A, 8700 Plus rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu:

n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Siemens MR Magnetom Jazz with Kodak DryView 8700 LASER IMAGER / Standard

Keypad


Data Cable 37-pin


8700 Standard

3M 8700 DryView

Requirements: Siemens Magnetom Jazz rel. VA12A, 8700 Standard rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad 8700 Standard Setup: n on TDB/C board:



n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu:


n Parity=Enable Even (if error set to Disable), Timeout=10





DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB

Keypad


Keypad

Data Cable 37-pin



3M 8700 DryView

3M8800Multi-In

putManag

er

Requirements: Magnetom Jazz rel. VA12A, 8800 rel. 5.1, 8500 rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8800/8500 Dual Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Siemens MR Magnetom Jazz with Kodak DryView 8500 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB

Keypad


Keypad

Data Cable 37-pin


8500 Plus

3M 8700 DryView

Requirements: Magnetom Jazz rel. VA12A, 8500 Plus rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8500 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Siemens MR Magnetom Jazz with Kodak DryView 8500 LASER IMAGER / Standard

Keypad


Data Cable 37-pin


8500 Standard

3M 8700 DryView

Requirements: Magnetom Jazz rel. VA12A, 8500 Standard rel. 1.22 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad 8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Left n on COMM Menu: 8700 Keypad Default n on IMAGE Menu: TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10





DryView 8300 Dual

DEIB

Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM



UKEIB

Keypad


Keypad

Data Cable 37-pin


3M8800Multi-InputManager

Requirements: Magnetom Jazz rel. VA12A, 8800 rel. 5.1, 8300 rel. 4.2

Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd


To Print: Select an image on MR monitor, press acquire button at camera keypad

Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center


n Serial: Baud=1200, Data=8, Stop=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None, Modality Group=0

8800 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: Density=16, Contrast=10 n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Siemens MR Magnetom Jazz with Kodak DryView 8300 LASER IMAGER / Standalone

Keypad

Digital Board Data outputData Cable 37-pin

Siemens Magnetom Jazz MRDryView 8300

Requirements: n Siemens Magnetom Jazz MR rel. 5.4 n 8300 rel. 4.2 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad 8300 Setup: n on 8300 Operator Menu into Configure User set:

n Density=16 n Contrast=10 n Sharp/Smooth=0

n on 8300 Service Menu into Configure User set: n Serial Control Interface: Protocol=Keypad n Digital Interface: Parity=Even (if error set to Disable) n Modality Group=0



Siemens MR Magnetom Jazz with Kodak Digital Science 969 HQ LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M969 HQ

UKEIB

Keypad


Keypad

Data Cable 37-pin



Requirements: Magnetom Jazz rel. VA12A, M969 HQ rel. 5.1 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center M969 HQ Setup: n on COMM Menu:


n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on EIB Menu:




Siemens MR Magnetom Jazz with Kodak Digital Science 969 HQT LASER IMAGER

Keypad


Data Cable 37-pin


M969 HQT


Requirements: Magnetom Jazz rel. VA12A, M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad M969 HQT Setup: n on TDB/C board:








Siemens MR Magnetom Jazz with Kodak Digital Science 959 XL LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M959 XL

UKEIB

XL Keypad


Keypad

Data Cable 37-pin


3 M L a ser I m ag er

Requirements: Siemens Magnetom Jazz rel. VA12A, M959 XL rel. 3.8 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: n on XL Control Panel set Density & Contrast depending on chemistry n on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center n on XL Input Module install LUT 322A0 M959 XL Setup: n on COMM Menu: 959 Default n on EIB Menu: Parity=Enable Even (if error set to Disable), Timeout=10



Siemens MR Magnetom Jazz with Kodak DryView 8100 LASER IMAGER

Copper Cable

UKEIB

Keypad

Digital Board Data OUT

Keypad

Data Cable 37-pin

Siemens MRMagnetom Jazz

DryView 8100

Imager

RS422 9-pole Plug

Requirements: Magnetom Jazz rel. VA12A, 8100 v1.1 Note: on Magnetom Jazz Digital Board, with jumper W12 image data parity is set:



To Print: Select an image on MR monitor, press acquire button at camera keypad Setup: on UKEIB set ON/OFF/ON/ON/ON/ON, Switch=Center 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=10, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=2 n on IMAGE QUALITY-> TFT FILES Menu: TFT=PMSB n on LOCAL PANEL Menu: Contrast=9, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Even (if error Disable)



Siemens MR Magnetom Jazz with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Requirements: Magnetom Jazz rel. VA12A Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board

by entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name= smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On

Data Cable 37-pin

Kodak MIM 200

Siemens MR Magnetom Jazz

Digital BoardData OUT

Kodak 160 camera




Keypad



n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination=KELI 160, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape 160 Setup: no modality-specific setup needed





Requirements: Magnetom Jazz rel. VA12A Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Data Cable 37-pin

Kodak MIM 200



Kodak 2180 camera



Keypad

Fiber Cable



n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination= KELP 2180, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape 2180 Setup: n Optical Interface board will automatic configure into 2180, no setup needed





Requirements: Magnetom Jazz rel. VA12A Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Computer Name=eg Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Data Cable 37-pin

Kodak MIM 200



Kodak 1120 camera



Keypad

Fiber Cable



n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup: n Select Destination= KELP 1120, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Film Contrast=+0, Interpolation=Cubic Spline n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n Curve Shape=3.0, Auto Study=Off, Console=On n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=CurveShape 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed





Requirements: Magnetom Jazz rel. VA12A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM 200 Destinations Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network: n Computer Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On

Keypad

Kodak MIM 200


Fiber Cable

Fiber Cable

3M8700DryView





Data Cable 37-pin



n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Pmsv3k.w87, Auto Study=Off, Console=On, Annotation=Off






Requirements: Magnetom Jazz rel. VA12A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: on MR Digital Board, with jumper W12 image data parity is set: with W12 not inserted (default) Image Parity=Even, with W12 inserted Image Parity=Odd Note: Image Data not lutted by MR, lutted by Camera Note: on MR in case of image acquisition error try to reset the MR Digital Board entering in Menu: Help->Exposure: Reset Dig. Prn. To Print: Select an image on MR monitor, press acquire button at camera keypad MIM200 Setup: n on Configure, Network:


n on Config., Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Jazz: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Primary Control Type= Conv.Kpad, Com Port=9 n Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=480, Parity=None, Timer=10, Sync=Off, Pixel=8 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On

Keypad


Kodak MIM 200



Control 9-pin

Data 37 pin

RS4229-pole Plug

Kodak DryView 8100


Data Cable 37-pinRS422 37-to-50 pinDigital Adaptor Cable



n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Pmsb.w87, Auto Study=Off, Console=On, Annotation=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (ie external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even



Siemens MR Jazz via DICOM with Kodak DryView 8300 LASER IMAGER


DryView 8300

DICOM Network

Requirements: n Siemens Magnetom Jazz platform Numaris Ortho rel. rel. VA13A (build 6.1F) n 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera

in this case use Dmax=300, Contrast=10, Modality Group=0 Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set:

n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=104, Printer AE title=8300

n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=0, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Information=LUT=0,10, Trim=YES (is always yes)

n in Menu: Help->Exposure set: Film Size=8x10, e.g., Division=6 (i.e., Format=6:1) n to acquire image on screen, press F9 or in Menu: Help->Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 8300 Setup: n on 8300 Operator Menu into Configure User set:


n Modality Group=0



Siemens MR Jazz via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: Jazz MR platform Numaris Ortho rel. VA13A preliminary (build 6.1F) Requirements: 190 rel. 1.7.29 Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera

in this case use Dmax=300, Curve Shape=3.0, Film Contrast=0 Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set:

n Printer host name=k190, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=190

n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=ANY n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=NORMAL, Border Density=BLACK n Empty img.density=BLACK, Max Density=300, Min Density=0 n Config.Information=CS435, Trim=YES (is always yes)

n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



MR Jazz via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /



DryView 8700 Plus

9410 PACS Link

DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSV3K Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set:



n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film




n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interp.Type=831, Interp.Num=2 n Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=E_MRI_SCANNER, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: 9410 v1.6, 8100 v2.4.1 Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSB Magnetom Jazz MR Setup: n in Help/Service/Options/DICOM 3 Option set:



n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8100, Model=8100 4096 pxls/line, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interp.Type=831, Interp Num=2 n Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87





n SCU AETitle=E_MRI_SCANNER, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera




n in Menu: Help->Exposure set: Film Size=8x10, e.g., Division=6 (i.e., Format=6:1) n to acquire image on screen, press F9 or in Menu: Help->Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u





n SCU AETitle=E_MRI_SCANNER, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1



MR Jazz via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, KELI 160 v7.2 Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera







MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 434 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 160 Setup: no modality-specific setup needed






DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 2180 rel. 2.17H Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera










DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera







MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 1120 Setup: n Optical Interface board will automatic configure into 1120, no setup needed






Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera



n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK n Empty img.density=BLACK, Max Density=300, Min Density=0 n Max Density=300, Config.Information=LUT=0,9, Trim=YES (is always yes)

n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film MIM200 Setup: n on Configure, Network:






n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera







MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by MR, lutted by Camera




n in Help/Exposure set: Film Size=14x17, e.g., Division=20 (i.e., Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue



n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin


Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera




n in Menu: Help->Exposure set: Film Size=8x10, e.g., Division=6 (i.e., Format=6:1) n to acquire image on screen, press F9 or in Menu: Help->Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film






n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.9048 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off




MR Jazz via DICOM with Kodak DryView 8900 LASER IMAGER

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera



n in Help/Service/Options/PrinterOption set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Info=LUT=0,9, Trim=YES (is always yes)

n in Help/Exposure set: Film Size=14x17, eg Division=20 (ie Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 8900 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any


DICOM Network

Kodak DryView 8900



n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Pmsv3k.w87 (Always=Y) n Contrast= 9 (Always=N), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=jazz



MR Jazz via DICOM with Kodak DryView 8150 LASER IMAGER

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: on Jazz MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera


n Printer host name=dryview, Printer IP addr=accordingly n Printer TCP port=5040, Printer AE title=DV8150

n in Help/Service/Options/Printer Option set (writing parameters with capital letters !): n Film Orientation=PORTRAIT, Medium Type=BLUE FILM n Film Destination=PROCESSOR, Magnification Type=CUBIC n Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK n Max Density=300, Config.Info=LUT=0,9, Trim=YES (is always yes)

n in Help/Exposure set: Film Size=14x17, eg Division=20 (ie Format=20:1) n to acquire image on screen, press F9 or in Help/Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film 8150 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On


DICOM Network

Kodak DryView 8150



n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Pmsb.w87 (Always=Y) n Contrast=9 (Always=N), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=mr



MR Jazz via DICOM with Kodak Color Medical Imager 1000

Requirements: Jazz MR platform Numaris Ortho rel. VA13A (build 6.1F) Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: on MR only one DICOM camera could be defined Note: Image Data not lutted by Jazz MR, lutted by Camera


- Printer host name=CMI1000, Printer IP addr=accordingly - Printer TCP port=5040, Printer AE title=CMI1000

n in Help/Service/Options/Printer Option set (writing params with capital letters !): - Film Orientation=PORTRAIT, Medium Type=BLUE FILM - Film Destination=PROCESSOR, Magnification Type=CUBIC - Print Smoothing=2, Border Density=BLACK, Empty img.density=BLACK - Max Density=300, Config.Information=LUT=0,9, Trim=YES (is always yes)

n in Menu: Help->Exposure set: Film Size=8x10, eg Division=6 (ie Format=6:1) n to acquire image on screen, press F9 or in Menu: Help->Exposure set: Expo Screen n automatic print after last F9 totally filled the film or in Help/Exposure: Print Film CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:






DICOM Network

Kodak CMI 1000



n under Image Quality, Grayscale Image Quality: n Contrast=9 (Always=Y), TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Siemens MR platform Numaris 3, based on SUN with some LASER IMAGER Products


Setup Manual for Siemens MR Open / Vision / Impact with LASER IMAGERS

Important note: from mid 2000 MR models Harmony/Symphony/Sonata switched to the Numaris 4 syngo based platform (see setup there).




Kodak DryView 8300 LASER IMAGER / Dual Printer.................................................. 9 n Kodak DryView 8300 LASER IMAGER /Standalone..................................................... 10 n Kodak Digital Science 969 HQ LASER IMAGER...................................................... 11 n Kodak Digital Science 969 HQT LASER IMAGER ................................................... 12 n Kodak Digital Science 959 XL LASER IMAGER ...................................................... 13 n Kodak DryView 8100 LASER IMAGER......................................................................... 14 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v 1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (1) . 15 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v 1.6 /





Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) .25 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Kodak DryView 8900 LASER IMAGER ........................................................................ 29




Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 31 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 32 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /







Kodak DryView 8200 LASER IMAGER(3,4,5)................................................................. 45 n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /






Siemens MR with Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual Printer

DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI



Siemens MR


3M 8700 DryView


Requirements: SHPT rel. 1.3, 8800 rel. 4.2, 8700 rel. 1.15 Note: on some old MR, if you want to configure a new camera because you are replacing an

existing one (e.g., you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with e.g., camera=3M 952 with SIB and reboot MR.

Setup: n on Siemens MR install Camera Config.File DRYVIEW (if not available HQ) n on Siemens MR to set Density and Contrast for the Camera:


n on SHPT Service Screen set Modality=Magnetom,Camera Type=XL, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak)

n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on HOST Menu: Pixel Correct=Yes, Scale Format=Yes, Scale Magnif=Yes n on HOST Menu: Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on EIB Menu: Parity=Disable, Timeout=50



Siemens MR with Kodak DryView 8700 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB


HostSPCI

SPDI



Siemens MR

8700 Plus

3M 8700 DryView

Requirements: 8700 rel. 1.15 Note: on some old MR, if you want to configure a new camera because you are replacing an




n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Right


8700 Plus Setup: n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Magnetom, Timeout=50, Smooth Beta=2, Sharp Beta=2 n on IMAGE Menu: (note: image quality setup proposed by Kodak)

n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=50



Siemens MR with Kodak DryView 8700 LASER IMAGER / Standard


SPCI

SPDI



Siemens MR

8700 Standard

3M 8700 DryView

Requirements: 8700 rel. 1.15 Note: on some old MR, if you want to configure a new camera because you are replacing an





Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 8700 Standard Setup: n on TDB/C board: Jumpers=RS232, Switch=Right n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Magnetom, Timeout=50, Smooth Beta=2, Sharp Beta=2 n on IMAGE Menu: (note: image quality setup proposed by Kodak)

n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=50




DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI



Siemens MR


3M 8700 DryView3M8800Multi-In

putManager



Setup: n on Siemens MR install Camera Config.File HQ n on Siemens MR to set Density and Contrast for the Camera:


n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8800/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak)

n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on HOST Menu: Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on EIB Menu: Parity=Disable, Timeout=50



Siemens MR with Kodak DryView 8500 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB


Host


SPCI

SPDI



Siemens MR

8500 Plus

3M 8700 DryView

Requirements: SHPT rel. 1.3, 8500 rel. 1.22 Note: on some old MR, if you want to configure a new camera because you are replacing an




n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8500 Plus Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak)

n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on HOST Menu: Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=50



Siemens MR with Kodak DryView 8500 LASER IMAGER / Standard


UKEIB


Host


SPCI

SPDI



Siemens MR

8500 Standard

3M 8700 DryView

Imager





n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Center n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak)

n TFT=PMS, Dmax=3.00, Contrast=9, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on HOST Menu: Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=50




8300 Dual

DEIB

Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM



UKEIB


Host


SPCI

SPDI



Siemens MR





into Exposure->Job Controller: press Stop into System->Camera: set Density=16,LUT=10 and press Set Parameters into Exposure->Job Controller: press Continue

n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 8300 Setup: (image quality proposed by Kodak) n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu: Serial: Baud=1200, Data=8, Stop=1, Parity=Even, Protocol=3M n on 8300 Service Menu: Digital Parity=None, Modality Group=0 8800 Setup: n UKEIB:ON/OFF/ON/OFF/OFF/ON,Switch=Right,on EIB:Parity=Disable,Timeout=50 n on COMM Menu: 959 Default; on IMAGE Menu:Density=16, Contrast=10 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on HOST Menu: Override 952 Beta=Yes, 831 Cmd Set Beta Tables: Horiz. Sharp=2



Siemens MR with Kodak DryView 8300 LASER IMAGER / Standalone

UKEIB


ImagerHost



SPCI

SPDI

Keypad



Siemens MR

8300




into Exposure->Job Controller: press Stop into System->Camera: set Density=16,LUT=10 and press Set Parameters into Exposure->Job Controller: press Continue

n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right


n Density=16 n Contrast=10 n Film Layout : Format=1on 1, 2 on 1, 4 on 1, 6 on 1, Mode=Portrait


Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None n Modality Group=0 (note: image quality setup proposed by Kodak)



Siemens MR with Kodak Digital Science 969 HQ LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M969 HQ

UKEIB


Host


SPCI

SPDI



Siemens MR


Requirements: SHPT rel. 1.3, HQ rel. 4.2 Note: on some old MR, if you want to configure a new camera because you are replacing an




n on SHPT Service Screen set Modality=Magnetom,Camera Type=HQ, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 M969 HQ Setup: n on COMM Menu: 959 Default n on IMAGE Menu: (note: image quality setup proposed by Kodak)

n TFT=693C0, Dmax=3.00, Contrast=6, Density=14 n on HOST Menu:




Siemens MR with Kodak Digital Science 969 HQT LASER IMAGER

M969 HQTRS232 25-to-9 pinHost Adaptor Cable

SPCI

SPDI



Siemens MR


Requirements: M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 Note: on some old MR, if you want to configure a new camera because you are replacing an





Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 M969 HQT Setup: n on TDB/C board: Jumpers=RS232, Switch=Right n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Magnetom, Timeout=50 n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry)

n TFT=PMSV3K, Contrast=11, Density=4, on OIC Menu: Chemistry=2 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=50



Siemens MR with Kodak Digital Science 959 XL LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M959 XL

UKEIB


Host


SPCI

SPDI



Siemens MR


Requirements: SHPT rel. 1.3, XL rel. 3.8 Note: on some old MR, if you want to configure a new camera because you are replacing an

existing one (eg you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with eg camera=3M 952 with SIB and reboot MR.

Setup: n on Siemens MR install Camera Config.File XL n on Siemens MR to set Density and Contrast for the Camera:

into Exposure->Job Controller: press Stop into System->Camera: set Density & LUT depending on chemistry


n on SHPT Service Screen set Modality=Magnetom,Camera Type=XL, Timeout=50 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 M959 XL Setup: n on COMM Menu: 959 Default n on EIB Menu: Parity=Disable, Timeout=50



Siemens MR with Kodak DryView 8100 LASER IMAGER


UKEIB


Host


SPCI

SPDI



Siemens MR

DryView 8100

Imager

RS422 9-pole Plug

Requirements: SHPT v1.3, 8100 v1.1 Note: on some old MR, if you want to configure a new camera because you are replacing an

existing one (eg you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with eg camera=3M 952 with SIB and reboot MR



n on SHPT Service Screen set Modality=Magnetom,Camera Type=XL, Timeout=50 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=50, P1,…,P6=0 n Alarm=Old, Acquire Timeout=50, P1,…,P6=0

n on IMAGE QUALITY-> TFT FILES Menu: TFT=PMSB n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=2 n on LOCAL PANEL Menu: Contrast=9, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Disable



Siemens MR with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


DPCCopper Cable

DPI4-to-DPC Cable

UKEIB


Host


SPCI

SPDI



Siemens MR

Fiber Cable

Fiber Cable


9410 PACS Link

3M 8700 DryView

DryView 8700 Plus

Requirements: SHPT v1.3, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras by basically

using the correspondent Model into 9410 Local Printers Note: on some old MR, if you want to configure a new camera because you are replacing an





n on SHPT Service Screen set Modality=Magnetom,Camera Type=XL, Timeout=50 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right






on Device Setup, HOST KEYPADS: n Kpad=mr, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Pmsv3k.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Dest.=Printer 1, Media Size=14x17, C=9, D=14 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60



Siemens MR with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


DPCCopper Cable

DPI4 Cable

UKEIB


Host


SPCI

SPDI



Siemens MR

DryView 8100

Control 9-pin

Data 37 pin

DPC-to-UKEIB Cable

9410 PACS Link


RS4229-pole Plug

Requirements: SHPT v1.3, 9410 v1.6, 8100 v2.4.1 Note: on some old MR, if you want to configure a new camera because you are replacing an

existing one (eg you are replacing a Kodak wet with a 3M dry camera), first you have to uninstall the old camera i.e., on Siemens MR configure MR with camera=None, boot MR like this, and then install the new camera i.e., on Siemens MR configure MR with eg camera=3M 952 with SIB and reboot MR.


into Exposure->Job Controller: press Stop into System->Camera: set Density=14, LUT=9 and press Set Parameter into Exposure->Job Controller: press Continue

n on SHPT Service Screen set Modality=Magnetom, Camera Type=XL, Timeout=50 n on SHPT Service Screen set Sharp Beta=2, Smooth Beta=2 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right






on Device Setup, HOST KEYPADS: n Kpad=mr, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Pmsb.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=9, D=14 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0




Siemens MR via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /





Kodak MIM 200

Siemens MR

SPCI

SPDI

Kodak 160 camera



Fiber Cable


Requirements: MIM 200 v6.1, KELI 160 v7.2 MR Setup: n on Siemens MR install Camera Config.File XLP n on Siemens MR to set Density and Contrast for the Camera:

into Exposure->Job Controller: press Stop into System-> Camera: Density=265 (i.e., Dmax), LUT=3 (i.e., Curve Shape=3.0)




n Computer Name=eg Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly

n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Vision: n Board/Channel=Digital Board 1 Channel 1, Logical Name=siemmr, n Mod.Name=mr, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off



n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On








Kodak MIM 200

Siemens MR

SPCI

SPDI

Kodak 2180 camera



Fiber Cable


Requirements: MIM 200 v6.1, KELP 2180 v2.17H MR Setup: n on Siemens MR install Camera Config.File XLP n on Siemens MR to set Density and Contrast for the Camera:









n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On



n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:












Kodak MIM 200

Siemens MR

SPCI

SPDI

Kodak 1120 camera



Fiber Cable


Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 MR Setup: n on Siemens MR install Camera Config.File XLP n on Siemens MR to set Density and Contrast for the Camera:









n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On



n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:












Kodak MIM 200

Siemens MR

SPCI

SPDI


Fiber Cable


Fiber Cable

3M 8700 DryView



Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras


MR Setup: n on Siemens MR install Camera Config.File DRYVIEW (if not available HQ) n on Siemens MR to set Density and Contrast for the Camera:




i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Vision:

n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Mod.Name=smr, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off



n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Pmsv3k.w87, Auto Study=Off, Console=On, Annotation=Off









Kodak MIM 200

Siemens MR

SPCI

SPDI


25-to-25 NullModem Cable COPCIL Board

Copper Cable

Control 9-pin

Data 37 pin

Kodak DryView 8100

RS4229-pole Plug


Requirements: MIM200 v6.1, 8100 v2.4.1 MR Setup: n on Siemens MR install Camera Config.File DRYVIEW (if not available HQ) n on Siemens MR to set Density and Contrast for the Camera:






n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=Magnetom Vision: n Board/Channel=Digital Board 1 Channel 1, Logical Name=smr, n Mod.Name=smr, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=512, Lines=512, Parity=None, Timer=1, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=2, Interpolation Smooth=2 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:

n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On



n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Pmsb.w87, Auto Study=Off, Console=On, Annotation=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even





Requirements: MIM200 v6.1 Requirements: 8900 release 2.0 (ie DRE v2.00.b3, MIM v5.6.b3, MCS v2.00) Note: on some old MR, if you want to configure a new camera because you are replacing an


MR Setup: n on Siemens CT install Camera Config.File Kodak 2180 (or XLP) n on Siemens CT to set Density and Contrast for the Camera: into Exposure->Job Controller: press Stop into System->Camera: set Density=265 (ie Dmax),

LUT=3 (ie Curve Shape=3.0) Contrast=500 (ie Film Contrast=0) and press Set Parameters

into Exposure->Job Controller: press Continue MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON

ie delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.= Somatom Power:

n Board/Channel=Digital Board 1 Channel 1, Logical Name= sct, n Mod.Name=sct, Primary Control: Type= Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off


n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1

n on Configure, Destination, Add, Print, Network, Qualified, 8900, Set:




Kodak MIM 200

Siemens MR

SPCI

SPDI



Kodak DryView 8900


DICOM Network



n General: Log.Name=8900, IPAddr=accordingly n General: Database=8900, Model=8900, Memory=32 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n DICOM Info: Protocol=DICOM 3.0, Service Class=Basic Grayscale Print n DICOM Info: Port=5040,AETitle=NER_8900,Counter=40,Response=100 n Supported Items: Collation=On, Common Text=On, Tonescaling=On n Supported Items: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnif=On, Bilinear=On, Replic=On, Cubic Spline=On n Interpolation: Cubic Convolution 2=On, Cubic Convolution 3=On n Format Types: Custom Formats=On, Row Symm.=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.3 n SCU: Luminance Space= On, Variable Border Density=On n SCU: Curve Shape=On, Perception LUT =On, PLUT Service=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination= 8900, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=2, Film Contrast=9 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT= Pmsv3k.w87, Auto Study=Off, Console=On, Annotation=Off




n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any



n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Pmsv3k.w87 (Always=Y) n Contrast= 9 (Always=Y), Smoothing Type=2 (Always=Y) n Dmin=0.00 (Always=N), Dmax= 3.00 (Always=Y) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mr



Siemens MR Open/Vision/Impact via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens MR- Harmony/Symphony ie Numaris 3.5 platform- Open/Vision/Impact ie Numaris 3 platform

DryView 8300

DICOM Network

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300 and on 8300 use D=16, C=10, Modality Group=0 b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera

in this case use Dmax=300 and on 8300 use D=16, C=1, Modality Group=4 Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8300, Port=104 n on MR into System/Run/DICOM Basic Print Configuration set:

Matrix=512 (if this field is not available, 512 is default i.e., already set) Filmsize=8x10, Orient=Portrait, Format=eg 3x2 Add, Density=300 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera)

n on MR into Exposure/Settings set Graduation=smt (i.e., smooth) 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=a) 10 or b) 1, Sharp/Smooth=0 i.e., Auto n Film Layout : Format=1 on 1, Mode=Portrait, 2:1P, 4:1P, 6:1P n on 8300 Service Menu into Configure User set: Modality Group=a) 0 or b) 4



Siemens MR Open/Vision/Impact via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 190 rel. 1.7.29 Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use

Dmax=300, Curve Shape=3.0, Film Contrast=0 (use a) configuration in case also a Virtuoso workstation is printing on same camera)

b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case use Dmax=265, Curve Shape=0.0, Film Contrast=0

Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=190, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set:

Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera)

n on MR into Exposure/Settings set Graduation=smt (i.e., smooth) 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=a) 3.00 or b) 2.65, Curve Shape=a) 3.0 or b) 0.0, Contrast=0 n Contrast Pivot Density=1.2, IPAddress=accordingly n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Siemens MR Open/Vision/Impact via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /



DryView 8700 Plus

9410 PACS Link

DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use

Dmax=300, C=9, TFT=PMSV3K b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case

use Dmax=260, C=4, TFT=WRKSTN2A Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=9410, Port=1024 n on MR into System/Run/DICOM Basic Print Configuration set:


n on MR into Exposure/Settings set Graduation=smt (i.e., smooth)




n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=8, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interp.Type=831, Interp.Num=2 n Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 9 or b) 4 n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 n Max.Density=a) 300 or b) 260, Border=0, Mag.Type=8, Smoothing=2 (or 13) n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No, Print Always=Yes n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=8, Header/Line, Parity=Enable Even, Port=0, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 9410 v1.6, 8100 v2.4.1 Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use

Dmax=300, C=9, TFT=PMSB b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case

use Dmax=260, C=2, TFT=WRKSTN2A MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=9410, Port=1024 n on MR into System/Run/DICOM Basic Print Configuration set:

Filmsize=14x17, Orient.=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera)







on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=a) 9 or b) 2 n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 n Max.Density=a) 300 or b) 260, Border=0, Mag.Type=8, Smoothing=2 (or 13) n Polarity=1, Orientation=1, Req.Image Size=0, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No, Print Always=Yes n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use

Dmax=300 and on 8300 use D=16, C=10, Modality Group=0 b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case

use Dmax=300 and on 8300 use D=16, C=1, Modality Group=4 MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=9410, Port=1024 n on MR into System/Run/DICOM Basic Print Configuration set:

Matrix=512 (if this field is not available, 512 is default i.e., already set) Filmsize=8x10, Orient.=Portrait, Format=eg 3x2 Add, Density=300 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera)





n Printer=8300, Model=8300 Copper, Output=Copper n Baud=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=a) 10 or b) 1 n TFT/ULUT=a) u1_109b.w8u or b) wrkstn83a.w8u n Max.Density=300, Border=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No, Print Always=Yes n Contrast Test Mode=No, Contrast Test Mode Density=0 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1



MR Open/Vision/Impact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Siemens MR- Harmony/Symphony/Sonata ie Numaris 3.5 platform- Open/Vision/Impact ie Numaris 3 platform

Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use

Dmax=300, Curve Shape=3.0, Film Contrast=0 b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case

use Dmax=265, Curve Shape=0.0, Film Contrast=0 Harmony/Symphony/Sonata or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=160, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set:





Siemens MR Open/Vision/Impact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Siemens MR- Harmony/Symphony

ie Numaris 3.5 platform- Open/Vision/Impact

ie Numaris 3 platform

DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200 Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 2180 v2.17H Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use


use Dmax=265, Curve Shape=0.0, Film Contrast=0 Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=2180, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set:









n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off









DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200 Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use


use Dmax=265, Curve Shape=0.0, Film Contrast=0 Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=1120, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set:





MR Open/Vision/Impact via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /


Siemens MR- Harmony/Symphony/Sonata ie Numaris 3.5 platform- Open/Vision/Impact ie Numaris 3 platform

Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use


use Dmax=265, C=4, TFT=WRKSTN2A Harmony/Symphony/Sonata or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8200, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set:


n on MR into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On



n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +9 or b) +4 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025





Siemens MR- Harmony/Symphony/Sonata




DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use

Dmax=300, C=9, TFT=PMSV3K b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case

use Dmax=260, C=4, TFT=WRKSTN2A Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8700, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set:









n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 4 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (or 13) (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off










DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use


use Dmax=260, C=2, TFT=WRKSTN2A MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8100, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set:

Filmsize=14x17, Orient.=Portrait, Transfer Matrix=1024 Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera)

n on MR into Exposure/Settings set Graduation=smt (i.e., smooth) MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On




n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 9 or b) 2 (Always=Y) n ImageDmin=0.00 (Always=N), ImageDmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (or 13) (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off










Kodak DryView 8300

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin


Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 a) if LUT=10 then Image Data not lutted by MR, lutted by Camera in this case use

Dmax=300 and on 8300 use D=16, C=10, Modality Group=0 b) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera in this case

use Dmax=300 and on 8300 use D=16, C=1, Modality Group=4 MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8300, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set:

Matrix=512 (if this field is not available, 512 is default i.e., already set) Filmsize=8x10, Orient.=Portrait, Format=eg 3x2 Add, Density=300 a) LUT=10 (i.e., Image Data not lutted by MR, lutted by Camera) b) LUT=1 (i.e., Image lutted by MR, linear-in-Density LUT in Camera)




MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Admin, Update SCU Connection Database, select the specific modality, Modify:

n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) u1_109b.w8u or b) wrkstn2a.w8u (Always=Y) n Contrast (dry)=a) 10 or b) 1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off





Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 c) if LUT=10 then Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSB d) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera

in this case use Dmax=260, C=4, TFT=WRKSTN2A Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=8900, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set:

Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024, Format=eg 5x4 Add, Density=a) 300 or b) 265 a) LUT=10 (ie Image Data not lutted by MR, lutted by Camera) b) LUT=1 (ie Image lutted by MR, linear-in-Density LUT in Camera)

n on MR into Exposure/Settings set Graduation=smt (ie smooth) 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On




DICOM Network

Kodak DryView 8900



n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:

n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 9 or b) 4 (Always=Y), n Smoothing Type=2 (or 13) (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mr




Requirements: MR Numaris 3.5 rel. VA13A or MR Numaris 3 rel. VB33A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 e) if LUT=10 then Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSB f) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera

in this case use Dmax=300, C=1, TFT=WRKSTN2A Harmony/Symphony or Open/Vision/Impact MR Setup: n on MR into System/Service declare camera IP Addr, AE Title=DV8150, Port=5040 n on MR into System/Run/DICOM Basic Print Configuration set:

Filmsize=14x17, Orient=Portrait, Transfer Matrix=1024, Format=eg 5x4 Add, Density=300 a) LUT=10 (ie Image Data not lutted by MR, lutted by Camera) b) LUT=1 (ie Image lutted by MR, linear-in-Density LUT in Camera)

n on MR into Exposure/Settings set Graduation=smt (ie smooth) 8150 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On




DICOM Network

Kodak DryView 8150



n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Pmsb.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 9 or b) 1 (Always=Y),Smoothing Type=2 (or 13) (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=mr



Siemens MR Open/Vision/Impact via DICOM with Kodak Color Medical Imager 1000

Requirements: MR Numaris 3 rel. VB33A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Siemens MR could be configured with a) LUT=10 or b) LUT=1 g) if LUT=10 then Image Data not lutted by MR, lutted by Camera

in this case use Dmax=300, C=9, TFT=PMSB h) if LUT=1 then Image Data lutted by MR, linear-in-Density LUT into Camera

in this case use Dmax=300, C=7, TFT=WRKSTN2A MR Setup: n on MR into System/Service declare camera IP Addr, AE Title, Port n on MR into System/Run/DICOM Basic Print Configuration set:

Matrix=512 (if this field is not available, 512 is default ie already set) Filmsize=8x10, Orient.=Portrait, Format=eg 3x2 Add, Density=300 a) LUT=10 (ie Image Data not lutted by MR, lutted by Camera) b) LUT=1 (ie Image lutted by MR, linear-in-Density LUT in Camera)

n on MR into Exposure/Settings set Graduation=smt (ie smooth) CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:





n Contrast=a) 9 or b) 7 (Always=Y)

DICOM Network

Kodak CMI 1000

Siemens MR- Open/Vision/Impact




n TFT Set (From list)=a) Pmsv3k.w87 or b) Wrkstn2a.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (or 13) (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Siemens Nuc.Med. model e.soft with LASER IMAGER Products


Setup for Siemens Nuc.Med. e.soft with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /














Nuc.Med. e.soft via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens e.softNuc. Med. workstationsyngo platform

Kodak DryView 8300

DICOM Network

Requirements: e.soft v3.5 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00


b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use D=16, C=1, Modality Group=4


DICOM Node=dv8300, Pixel Size=85x85, Film Sheet Formats: Inch8x10, it appears media sheet size=Inch8x10, Size/Pixel=2736x2136 (since Landscape), Medium Type=Blue Film, Film Destination=Processor, press button Save

n into Local Service/Config/DICOM LUT files set: NM Image=a) linear or b) NM, Max Density=3.00




Nuc.Med. e.soft via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: e.soft v3.5 Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00


b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, Curve Shape=0.0, Film Contrast=0



n into Local Service/Config/DICOM LUT files set : NM Image=a) linear or b) NM, Max Density=3.00




Nuc.Med. e.soft via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: e.soft v3.5 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras


Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00


b) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=3, TFT=WRKSTN2A




9410 Setup:

on Device Setup, LOCAL PRINTERS: n Printer=8700, Model=8700, Output=Fiber



n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 15 or b) 3 n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: e.soft v3.5 Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00






9410 Setup:







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: e.soft v3.5 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00










Nuc.Med. e.soft via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00



Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=k160, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=k160, Host Sel.=k160, AE Title=160, Port=5040 press button Save and then press button Verification step 3: HC Device=k160, Type=DICOM Printer, Class=kodak160,





n General: Log.Name=KELI 160, IPAddr=100.100.100.30,



n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7








DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00














DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00



Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120,








n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7








Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00





n into Local Service/Config/DICOM LUT files set NM Image=a) linear or b) NM, Max Density=3.00

MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set:



n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +15 or b) +3 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025







DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination and if HQ by installing HQ into syngo DICOM Camera Config.File

Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00






MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly



n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:



n on Admin, Update SCU Connection Database, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 15 or b) 3 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00











n on Admin, Update SCU Connection Database, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) 15 or b) 3 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off









DICOM Network

Control 9 pin

Data 37 pin


Requirements: e.soft v3.5 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00













n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 4 or b) 1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n ICCProfile=Off (Always=N), Modality=OT (Always=N) n BodyPart=Default (Always=N), Modality Group=1 n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Conv.Group=1, Gamma Table=1, Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off





Requirements: e.soft v3.5 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=NM a) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00





- into Local Service/Config/DICOM LUT files set Usage of Presentation LUT=disabled NM Image=a) linear (if not there, choose nothing selected) or b) NM SC Image=a) linear (if not there, choose nothing selected) or b) NM Max Density=3.00



DICOM Network

Kodak DryView 8900






n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 15 or b) 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=esoft




Requirements: e.soft v3.5 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=NM c) into Local Service/Config/DICOM LUT files set NM Image=linear , MaxDens=3.00


d) into Local Service/Config/DICOM LUT files set NM Image=NM, MaxDens=3.00 if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, TFT=WRKSTN2A



- into Local Service/Config/DICOM LUT files set Usage of Presentation LUT=disabled NM Image=a) linear (if not there, choose nothing selected) or b) NM SC Image=a) linear (if not there, choose nothing selected) or b) NM Max Density=3.00




DICOM Network

Kodak DryView 8150




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast=a) 15 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=esoft



Nuc.Med. e.soft via DICOM with Kodak Color Medical Imager 1000

Requirements: e.soft v4.0 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=NM e) into Local Service/Config/DICOM LUT files set NM Image=linear


f) into Local Service/Config/DICOM LUT files set NM Image=NM if LUT=NM then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=7, TFT=WRKSTN2A



- into Local Service/Config/DICOM LUT files set NM Image=a) linear or b) NM, Max Density=3.00


DICOM Network

Kodak CMI 1000


Siemens Nuc.Med. ICON with LASER IMAGER Products


Setup for Siemens Nuc.Med. ICON with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /














Siemens ICON via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens ICONNuc. Med. workstationMcIntosh platform

Kodak DryView 8300

DICOM Network

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8300 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8300, Port=104 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=0 i.e., Auto n on 8300 Service Menu into Configure User set: Modality Group=0



Siemens ICON via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 190 rel. 1.7.29 Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=k190 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=190, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=3.0, Contrast=0, n Contrast Pivot Density=1.2, IPAddress=accordingly, n Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



Siemens ICON via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into 9410 Local Printers Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8700 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=9410, Port=1024 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 9410 Setup:





n Printer=8700, AE Title=9410, Port=1024, Max Associations=5 on Device Setup, SCP PRINTERS, Registered Users:

n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Density=14, Dmax=3.00, Contrast=6 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 9410 v1.6, 8100 v2.4.1 Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8100 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=9410, Port=1024 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 9410 Setup:



on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly



n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsb.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=2 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8300 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=9410, Port=1024 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 9410 Setup: n on Device Setup, LOCAL PRINTERS:



n SCU AETitle=accordingly, SCU IPAddr=accordingly



n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




Siemens ICON via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, KELI 160 v7.2 Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=k160 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=160, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak160, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On



n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off







Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 2180 camera

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 2180 v2.17H Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=k2180 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=2180, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak2180, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue)



n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off







Kodak MIM 200

DICOM Network

Fiber Cable

Kodak 1120 camera

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 1120 v2.40/032 Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=k1120 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=1120, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Computer Name=e.g., Kodak1120, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue)



n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=3 i.e., 435 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=Cubic, n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off







Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8200 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8200, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32 n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear)



n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025







DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras

by basically using the correspondent Model into MIM200 Destination Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8700 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8700, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:


n General: Log.Name=8700



n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7

n on Admin, Update SCU Connection Database, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8100 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8100, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:






n on Admin, Update SCU Connection Database, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off









DICOM Network

Control 9 pin

Data 37 pin


Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8300 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8300, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even



n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=u1_109b.w8u (Always=Y), Contrast (dry)=10 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off





Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8900 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=8900, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:



n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On


DICOM Network

Kodak DryView 8900



n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= Pmsv3k.w87 (Always=Y) n Contrast= 9 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=icon




Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W n set Host Name=dv8150 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=DV8150, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:


n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On


DICOM Network

Kodak DryView 8150




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Pmsb.w87 (Always=Y) n Contrast=9 (Always=Y), Smoothing Type=2 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=icon



Siemens ICON via DICOM with Kodak Color Medical Imager 1000

Requirements: Siemens ICON v6.0.3, Dicom Link v1.3 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Image Data not lutted by Siemens ICON, lutted by Camera ICON Setup: n into DICOMtools folder, double-click DICOMlink application icon n into Configuration/Remote Nodes/New set Service=Print B/W (or Color) n set Host Name=CMI1000 n (note: remember in System Folder into Hosts file to map Host Name=IPaddress) n set Application AE=CMI1000, Port=5040 from ICON application: n into File/Print: Copies=1, Interpolation=Cubic n into File/Page Setup: Polarity=Normal, Orientation=Landscape n into File/Page Setup: minD=0.20, maxD=3.00, Format=1:1 n into File/Page Setup: border=Black, empty=Black n into File/Page Setup: DPI=don’t care, use doc window size=don’t care CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)



DICOM Network

Kodak CMI 1000




n Contrast=9 (Always=Y) n TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=2 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



Siemens workstation Leonardo with LASER IMAGER Products


Setup for Siemens workstation Leonardo with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /















Siemens Leonardo via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens LeonardoWorkstationsyngo platform

DryView 8300

DICOM Network

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00









Siemens Leonardo via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 190 rel. 1.7.29 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00









Leonardo via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


Siemens LeonardoWorkstationSyngo platform

DryView 8700 Plus

9410 PACS Link

DICOM Network

3M 8700 DryView

Fiber Cable

Fiber Cable

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,











n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, IPAddr=accordingly n SCP=8700, Copies=1, Contrast Table=a) 4 or b) 2 n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60





Siemens LeonardoWorkstationSyngo platform


DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 9410 v1.6, 8100 v2.4.1 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00






9410 Setup:







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00







n Printer=8300, Model=8300 Copper, Output=Copper n Command Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Pixel=8, Header/Line, Timeout=60, Transfer Rate=1 MHz n Film Mismatch=Print Always, Interpolation Type=831



n Interp Num=0, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=upmsv3k.w8u






Leonardo via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, KELI 160 v7.2 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00













DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 2180 v2.17H Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00











n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=a) 3 i.e., 434 or b) 0.0 (Always=Y) n Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 1120 v2.40/032 Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00



Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=kodak1120, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak1120, Host Sel.=kodak1120, AE Title=1120, Port=5040 press button Save and then press button Verification step 3: HC Device=kodak1120, Type=DICOM Printer, Class=kodak1120,










Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00












n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast (dry)=a) +4 or b) +2 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=0 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,








MIM200 Setup:



n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:











DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00






MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly



n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On, Landscape=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7









Kodak DryView 8300

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin


Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: syngo could be configured with a) LUT=linear or b) LUT=xa a) into Local Service/Config/DICOM LUT files set XA Image=linear, MaxDens=3.00













n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=a) 693c0.w8u or b) wrkstn83a.w8u (Always=Y) n Contrast (dry)=a) 4 or b) 1 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off




Leonardo via DICOM with Kodak DryView 8900 LASER IMAGER

Requirements: Leonardo syngo platform rel. VD10A 2004A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: syngo could be configured with a) LUT=linear or b) LUT=xa c) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00


d) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=2, TFT=WRKSTN2A







DICOM Network

Kodak DryView 8900





n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT/ULUT= a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 4 or b) 2 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=leo



Leonardo via DICOM with Kodak DryView 8150 LASER IMAGER

Requirements: Leonardo syngo platform VB30B Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: syngo could be configured with a) LUT=linear or b) LUT=xa e) into Local Service/Config/DICOM LUT files set XA Image=linear , MaxDens=3.00


f) into Local Service/Config/DICOM LUT files set XA Image=xa, MaxDens=3.00 if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=1, TFT=WRKSTN2A

syngo Setup: n into Local Service/Config/DICOM Hardcopy Devices declare: step 1: Host Name=dv8150, IP Addr=accordingly, press button Test, press Save step 2: Log.Name=kodak8150, Host Sel.=dv8150, AE Title=DV8150, Port=5040 press button Save and then press button Verification step 3: HC Device=ek8150, Type=DICOM Printer,Class=kodak8150,

DICOM Node=kodak8150, Pixel Size=78.12x78.12, Film Sheet Formats: Inch14x17, it appears media sheet size=Inch14x17, Size/Pixel=4438x5390, Medium Type=Blue Film, Film Destination=Processor, press button Save





DICOM Network

Kodak DryView 8150




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name= a) Siefl87b.w87 or b) Wrkstn2a.w87 (Always=Y) n Contrast= a) 4 or b) 1 (Always=Y), Smoothing Type=0 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=leo



Leonardo via DICOM with Kodak Color Medical Imager 1000

Requirements: Leonardo platform syngo VD30A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: syngo could be configured with a) LUT=linear or b) LUT=xa g) into Local Service/Config/DICOM LUT files set XA Image=linear


h) into Local Service/Config/DICOM LUT files set XA Image=xa if LUT=ax then Image Data lutted by syngo, linear-in-Density LUT into Camera in this case use Dmax=300, C=7, TFT=WRKSTN2A




CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup: n IPAddr=accordingly, Subnet Mask=accordingly, Gateway=accordingly

DICOM Network

Kodak CMI 1000




n under More Settings: DICOM Port=5040 n Edit Host Name/AE Title=CMI1000 n Modality (SCU) Config (or after modality recognition): n Select Modality=accordingly, Modality Config.Assistant=Yes, Reset Config=No n Note: Color IQ settings used when images sent with Color DICOM SOP n under Image Quality, Color Image Quality: (no need to adjust, leave defaults)






Siemens workstation MagicView 300 with LASER IMAGER Products


Setup for Siemens workstation MagicView 300 with LASER IMAGERS Connection via DICOM: n Kodak DryView 8300 LASER IMAGER......................................................................... 2 n Kodak Digital Science 190 MEDICAL LASER PRINTER......................................... 3 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /















Siemens Magicview 300 via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens MagicView 300

Kodak DryView 8300

DICOM Network

Requirements: Siemens Magicview 300 rel. VA30B Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Names: Printer Type=Kodak 8300, Alias=Kodak DV8300, AET=8300 TCP/IP: Host =PC-name of DV8300, Port=104, DNS/WINS=clicked

- Save - into Film Sheet set:

Film Job: Printer Alias=Kodak DV8300, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=0, Border=BLACK, Empty=BLACK, Trim=NO

- into Advanced set: Nbr.Retries=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked

- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of DV8300 must be inserted in hosts of MV300 PC 8300 Setup: n on 8300 Operator Menu into Configure User set: n Density=16, Contrast=10, Sharp/Smooth=Auto n Film Layout : Format=1 on 1, Mode=Portrait, 2:1P, 4:1P, 6:1P n on 8300 Service Menu into Configure User set: Modality Group=0



Siemens MagicView 300 via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER


DICOM Network

Kodak 190 camera

Requirements: Siemens MagicView 300 rel. VA30B, 190 rel. 1.7.29 Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Names: Printer Type=Kodak 190, Alias=Kodak MLP190, AET=190 TCP/IP: Host =PC-name of MLP190, Port=5040, DNS/WINS=clicked


Film Job: Printer Alias=Kodak MLP190, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO


- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MLP190 must be inserted in hosts of MV300 PC 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=30.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45



MagicView 300 via DICOM with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /





DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Siemens MagicView 300 rel. VA30B, 9410 v1.6, 8700 v1.34 Note: Image Data not lutted by MV300, lutted by Camera Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into MagicView Camera Config.File

MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Network Names: Printer Type=Kodak 8700, Alias=Kodak DV8700, AET=9410 TCP/IP: Host =PC-name of 9410, Port=1024, DNS/WINS=clicked




- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of 9410 must be inserted in hosts of MV300 PC




n Printer=dv8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87

n on Device Setup, SCP PRINTERS, Current Providers: n Printer=dv8700, AE Title=9410, Port=1024, Max Associations=5

n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=dv8700, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60





Siemens MagicView


DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Siemens MagicView 300 rel. VA30B, 9410 v1.6, 8100 v2.4.1 Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Network Names: Printer Type=Kodak 8100, Alias=Kodak DV8100, AET=9410 TCP/IP: Host =PC-name of 9410, Port=1024, DNS/WINS=clicked










on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=9, TFT/ULUT=Pmsv3k.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=11 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Siemens MagicView 300 rel. VA30B Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Names: Printer Type=Kodak 8300, Alias=Kodak DV8300, AET=9410 TCP/IP: Host =PC-name of 9410, Port=1024, DNS/WINS=clicked










n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=10, TFT/ULUT=u1_109b.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=No, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0




MagicView 300 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /



Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, KELI 160 v7.2 Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Network Names: Printer Type=Kodak 160, Alias=Kodak KELI160, AET=160 TCP/IP: Host =PC-name of MIM200, Port=5040, DNS/WINS=clicked


Film Job: Printer Alias=Kodak KELI160, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO


- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MIM200 must be inserted in hosts of MV300 PC





n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7








DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200 Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 2180 v2.17H Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Names: Printer Type=Kodak 2180, Alias=Kodak KELP2180, AET=2180 TCP/IP: Host =PC-name of DPS, Port=5040, DNS/WINS=clicked


Film Job: Printer Alias=Kodak KELP2180, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO


- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of DPS must be inserted in hosts of MV300 PC





n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7








DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 1120 rel. 2.40/032 Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Names: Printer Type=Kodak 1120, Alias=Kodak KELP1120, AET=1120 TCP/IP: Host =PC-name of DPS, Port=5040, DNS/WINS=clicked


Film Job: Printer Alias=Kodak KELP1120, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO


- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of DPS must be inserted in hosts of MV300 PC





n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7







Siemens workstationMagicView 300

Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Network Names: Printer Type=Kodak 8200,Alias=Kodak DV8200,AET=8200 TCP/IP: Host =PC-name of MIM200, Port=5040, DNS/WINS=clicked



- into Advanced set: Nbr.Retri.e.,s=5, Print Retry Delay=180, Print Timeout=300, Refresh=180 Enable Hospital Information=not clicked

- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MIM200 must be inserted in hosts of MV300 PC MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8200, Set: n General: Log.Name=8200, IPAddr=100.100.100.40, n General: Database Name=8200, Model=8200, Memory=32



n Media Info: Media=35x43cm, 4361x5223, 5133, Any (Blue,Clear) n Media Info: Media=35x35cm, 4361x4247, 4157, Any (Blue,Clear) n Media Info: Media=11x14in, 3272x4361, 4271, Any (Blue,Clear) n Supported Item: Collation=On, Common Text=On, Tonescaling=On n Supported Item: Remote Image Deletion=On, Rotation=On n Interpolation: No Magnification=On, Bilin=On, Repl=On n Interpolation: Cubic Spline=On, Cubic Convolution 2=On n Format Types: Custom=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n SCU: Density Space=On, Variable Border=On, PLUT Service=On n SCU: Curve Shape Tonescaling=On, Perception LUT Tonescaling=On n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8200 Setup on CONFIGURATION Menu: n on IMAGE QUALITY-> TFT FILES Menu: TFT=Ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on DICOM Menu: SCU Config.: AE=MIM, TFT=VER693C0, C=6, Smoothing=0 n on DICOM Menu: DICOM Config.: AE=NER_ANY, Port=1025







DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and in case of 8500 and HQ by installing 8500 and HQ into MagicView Camera Config.File

Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Names: Printer Type=Kodak 8700, Alias=Kodak DV8700, AET=8700 TCP/IP: Host =PC-name of MIM200, Port=5040, DNS/WINS=clicked




- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MIM200 must be inserted in hosts of MV300 PC



MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsv3k.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off 8700 Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Port=0, Parity=Enable Even, Timeout=60







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):





- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MIM200 must be inserted in hosts of MV300 PC MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add:





n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=Pmsb.w87 (Always=Y), Contrast (dry)=9 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=11 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Negotiate Color Print=Off








Kodak DryView 8300

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin


Requirements: Siemens MagicView 300 rel. VA30B Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):





- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of MIM200 must be inserted in hosts of MV300 PC MIM200 Setup: n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32



n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=u1_109s.w8u (Always=Y), Contrast (dry)=10 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=2 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off 8300 Setup: n on Operator Menu set: D=16, C=6, Sharp/Smooth=0 i.e., Auto n on Operator Menu set: Film Layout: 1:1 Portrait, 2:1P, 4:1P, 6:1P n on Service Menu set: Ratio=1.00, Serial=1200,8,1,Even,Comma,3M, Memory=16 n on Service Menu set: Digital Interface: Parity=Even, Modality Group=1



MagicView 300 via DICOM with Kodak DryView 8900 LASER IMAGER

Requirements: Siemens MagicView 300 rel. VA40A Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Names: Printer Type=Kodak 8900 (or 8100), Alias=Kodak DV8900, AET=8900 TCP/IP: Host =PC-name of 8900, Port=5040, DNS/WINS=clicked




- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of 8900 must be inserted in hosts of MV300 PC 8900 Setup: n on Configuration, System, Network: n Host Name=DV8900, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications:



n Media Types: Media=8x10in, 5167x6490, 6234, Any


DICOM Network

Kodak DryView 8900



n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Pmsv3k.w87 (Always=Y), Contrast=9 (Always=Y) n Smoothing Type=11 (Always=N) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mv300




Requirements: Siemens MagicView 300 rel. VA40A Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Names: Printer Type=Kodak 8150 (or 8100),Alias=Kodak DV8150,AET=DV8150 TCP/IP: Host =PC-name of 8150, Port=5040, DNS/WINS=clicked




- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of 8150 must be inserted in hosts of MV300 PC 8150 Setup: n on Configuration, System, Network: n Host Name=DV8150DRE, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Configuration, DICOM SCP, Communications: n Port=5040, Association Limit=12, Source Name=DICOM n on Configuration, Destination: n AE Title: Log.Name=DV8150 n Media Types: Media=35x43cm, 4438x5390, 5262, Any n Media Types: Media=35x35cm, 4438x4414,4286, Any n Media Types: Media=11x14in, 3440x4438, 4310, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On


DICOM Network

Kodak DryView 8150



n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0 n Formatting: Max Img Rows=0, Pixel Pitch=12.8000, Min Horiz Sep=2 n Formatting: Min Vert Sep=2, Trim Width Enabled=2 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.10 n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Pmsb.w87 (Always=Y) n Contrast=9 (Always=N), Smoothing Type=11 (Always=N) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=mv300



MagicView 300 via DICOM with Kodak Color Medical Imager 1000

Requirements: Siemens MagicView 300 rel. VA40A Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) Note: Image Data not lutted by MV300, lutted by Camera MagicView 300 Setup: - into Patient/Settings - Create New - into Network set (note: choose the camera from the Printer Type list):

Names: Printer Type=Kodak CMI1000, Alias=Kodak CMI1000, AET=CMI1000 TCP/IP: Host =PC-name of CMI1000, Port=5040, DNS/WINS=clicked


Film Job: Printer Alias=Kodak CMI1000, Medium Type=BLUE FILM Sheet: Magnif=CUBIC, Smooth=11, Border=BLACK, Empty=BLACK, Trim=NO


- note: when Camera Config. is completed, select the camera from the Alias list - note: IP-addr and PC-name of CMI1000 must be inserted in hosts of MV300 PC CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:





DICOM Network

Kodak CMI 1000




n under Image Quality, Grayscale Image Quality: n Contrast=9 (Always=Y) n TFT Set (From list)=Pmsv3k.w87 (Always=Y) n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=11 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No





Setup for Siemens workstation MagicView 1000 with LASER IMAGERS Connection POINT-TO-POINT: n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8700 LASER IMAGER / Dual.......................................................................... 3 n Kodak DryView 8700 LASER IMAGER / Plus .......................................................................... 4 n Kodak DryView 8700 LASER IMAGER / Standard ................................................................... 5 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8500 LASER IMAGER / Dual.......................................................................... 6 n Kodak DryView 8500 LASER IMAGER / Plus .......................................................................... 7 n Kodak DryView 8500 LASER IMAGER / Standard ................................................................... 8 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8300 LASER IMAGER / Dual.......................................................................... 9 n Kodak DryView 8300 LASER IMAGER / Standalone................................................................ 10 n Kodak DryView 8800 MULTI-INPUT MANAGER /

Kodak DryView 8700 LASER IMAGER / Dual / Kodak DryView 8300 LASER IMAGER / Dual.......................................................................... 11

n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8700 LASER IMAGER / Dual / Kodak DryView 8500 LASER IMAGER / Dual.......................................................................... 12

n Kodak DryView 8800 MULTI-INPUT MANAGER / Kodak DryView 8500 LASER IMAGER / Dual / Kodak DryView 8300 LASER IMAGER / Dual.......................................................................... 13

n Kodak Digital Science 969 HQ LASER IMAGER.................................................................. 14 n Kodak Digital Science 969 HQT LASER IMAGER ............................................................... 15 n Kodak Digital Science 959 XL LASER IMAGER.................................................................. 16 n Kodak DryView 8100 LASER IMAGER..................................................................................... 17 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (1) ........................................... 18

n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8100 LASER IMAGER (1)................................................................................ 20

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ............................................................................. 22

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 2180 LASER PRINTER (2,3,4) .......................................................................... 24


n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual and HQ) (4) ........... 28

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8100 LASER IMAGER (4)......................................................................... 30




Connection via DICOM: n Kodak DryView 8300 LASER IMAGER..................................................................................... 32 n Kodak Digital Science 190 MEDICAL LASER PRINTER .................................................... 33 n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /

Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual,8500 Plus, 8800/8500 Dual and HQ) (1) ............................................ 34



n Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (1) ........................................................................................................................ 40

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak Ektascan 160 LASER IMAGER (2,3,4) ............................................................................. 42



n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8200 LASER IMAGER (3,4,5)..................................................................... 48

n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8700 LASER IMAGER / Plus (see also 8800/8700 Dual, 8500 Plus, 8800/8500 Dual and HQ) (4,5) ..................................... 50



n Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography (see also 8600) (5) .............................................................................................................. 56

n Kodak DryView 8900 LASER IMAGER..................................................................................... 59 n Kodak DryView 8150 LASER IMAGER..................................................................................... 62 n Kodak Color Medical Imager 1000............................................................................................. 65



Siemens MagicView VA31B with Kodak DryView 8800 MULTI-INPUT MANAGER /


DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI



Siemens Camera Server


3M 8700 DryView


Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, 8800 rel. 4.2, 8700 rel. 1.15 Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31B install Camera Config.File DRY_VIEW n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes n on EIB Menu: Parity=Disable, Timeout=75



Siemens MagicView VA31B with Kodak DryView 8700 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB


HostSPCI

SPDI




8700 Plus

3M 8700 DryView

Requirements: Siemens MagicView rel. VA31B, 8700 Plus rel. 1.15 Note: Magicview could be linked to 8700 direct (Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31B install Camera Config.File DRY_VIEW n on UKEIB set OFF/ON/OFF/OFF/ON/OFF, Switch=Right

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 8700 Plus Setup: n on COMM Menu:



n TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on SYSTEM Menu:





Siemens MagicView VA31B with Kodak DryView 8700 LASER IMAGER / Standard


SPCI

SPDI




8700 Standard

3M 8700 DryView

Requirements: Siemens MagicView rel. VA31B, 8700 Standard rel. 1.15 Note: Magicview could be linked to 8700 direct (Local Print) or over Camera Server Setup: on Siemens MagicView rel. VA31B install Camera Config.File DRY_VIEW

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 8700 Standard Setup: n on TDB/C board:




n TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on SYSTEM Menu:







DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI





3M 8700 DryView 3M8800Multi-Input Manager

Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, 8800 rel. 5.1, 8500 rel. 1.22 Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 8800/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes n on EIB Menu: Parity=Disable, Timeout=75



Siemens MagicView VA31B with Kodak DryView 8500 LASER IMAGER / Plus

DEIB

Fiber Cable

Fiber Cable

UKEIB


Host


SPCI

SPDI




8500 Plus

3M 8700 DryView

Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, 8500 Plus rel. 1.22 Note: Magicview could be linked to 8500 direct (Local Print) or over Camera Server Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 8500 Plus Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=75



Siemens MagicView VA31B with Kodak DryView 8500 LASER IMAGER / Standard


UKEIB


Host


SPCI

SPDI




8500 Standard

3M 8700 DryView

Imager

Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, 8500 Standard rel. 1.22 Note: Magicview could be linked to 8500 direct (Local Print) or over Camera Server Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right


8500 Standard Setup: n on TDB/C board: Jumpers=RS422, Switch=Center n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=75





8300 Dual

DEIB

Fiber Cable

Fiber Cable

Fiber Cable

8800 MIM



UKEIB


Host


SPCI

SPDI





Requirements: Siemens MagicView rel. VA31C, SHPT rel. 1.3, 8800 rel. 5.1, 8300 rel. 4.4 Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31C install Camera Config.File 8300 n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8300 Setup: n on 8300 Operator Menu set: Film Layout : Format=1on 1, Mode=Portrait n on 8300 Service Menu set:



8800 Setup: n on COMM Menu: 959 Default n on IMAGE Menu: Density=16, Contrast=1 n on HOST Menu: Pixel Corr.=Yes, Scale Format=Yes, Scale Mag.=Yes n on EIB Menu: Parity=Disable, Timeout=75



Siemens MagicView VA31B with Kodak DryView 8300 LASER IMAGER / Standalone

UKEIB


ImagerHost



SPCI

SPDI

Keypad




8300

Requirements: Siemens MagicView rel. VA31C, SHPT rel. 1.3, 8300 rel. 4.4 Note: Magicview could be linked to 8300 direct (i.e., Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31C install Camera Config.File 8300 n on SHPT Service Screen set Modality=Somatom, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right




Nbr. of Stop bits=1, Parity=Even, Protocol=3M n Digital Interface: Parity=None n Modality Group=4




Kodak DryView 8700 LASER IMAGER / Dual / Kodak DryView 8300 LASER IMAGER / Dual

DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI




8300 Dual

Fiber Cable


3M8700DryView

8700 Dual

Fiber Cable

POEIB



Requirements: Siemens MagicView VA31B, SHPT 1.3, 8800 v.5.1, 8700 v.1.22, 8300 v.4.4 Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8300 Setup: n on 8300 Operator Menu set:



n Digital Interface: Parity=None, Modality Group=4 8800/8700 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif.=Yes n on EIB Menu: Parity=Disable, Timeout=75





DEIB

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI





3M 8700 DryView

3M8800Multi-In

putManag

er

3M 8700 DryView

8500 Dual

Fiber Cable

Requirements: Siemens MagicView VA31B, SHPT 1.3, 8800 v.5.1, 8700 v.1.22, 8500 v.1.22

Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server

Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right


8800/8700 Dual/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnification=Yes n on EIB Menu: Parity=Disable, Timeout=75





DEIB

Fiber Cable

Fiber Cable

8800 MIM

UKEIB


Host


SPCI

SPDI




8300 Dual

Fiber Cable


3M8700DryView

8500 Dual

Fiber Cable

POEIB



Requirements: Siemens MagicView VA31B, SHPT 1.3, 8800 v.5.1, 8500 v.1.22, 8300 v.4.4 Note: Magicview could be linked to 8800 direct (Local Print) or over Camera Server Setup: n on MagicView VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8300 Setup: n on 8300 Operator Menu set:



n Digital Interface: Parity=None, Modality Group=4 8800/8500 Dual Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif.=Yes n on EIB Menu: Parity=Disable, Timeout=75



Siemens MagicView VA31B with Kodak Digital Science 969 HQ LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M969 HQ

UKEIB


Host


SPCI

SPDI





Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, M969 HQ rel. 4.2 Note: Magicview could be linked to HQ direct (i.e., Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31B install Camera Config.File M969_HQ n on SHPT Service Screen set Modality=Sienet, Camera Type=HQ, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 M969 HQ Setup: n on COMM Menu: 959 Default n on IMAGE Menu: TFT=SIEWS87B, Dmax=3.00, Contrast=2, Density=14 n on HOST Menu: Pixel Correction=Yes, Scale Format=Yes, Scale Magnif=Yes n on EIB Menu: Parity=Disable, Timeout=75



Siemens MagicView VA31B with Kodak Digital Science 969 HQT LASER IMAGER

M969 HQT


SPCI

SPDI





Requirements: Siemens MagicView rel. VA31B, M969 HQT rel. 1.0 Note: in case of image quality problems update HQT to rel. 2.0 Note: Magicview could be linked to HQT direct (Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31B install Camera Config.File M959_XL

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 M969 HQT Setup: n on TDB/C board: Jumpers=RS232, Switch=Right n on COMM Menu: Siemens Default n on SIEMENS Menu: Modality=Sienet, Timeout=75 n on IMAGE Menu: (note: values suitable for 60 secs Kodak APS chemistry)

n TFT=TLII, Contrast=5, Density=7, on OIC Menu: Chemistry=1 n on SYSTEM Menu: Memory Management=Best Fit n on EIB Menu: Parity=Disable, Timeout=75



Siemens MagicView VA31B with Kodak Digital Science 959 XL LASER IMAGER

DEIB

Fiber Cable

Fiber Cable

M959 XL

UKEIB


Host


SPCI

SPDI





Requirements: Siemens MagicView rel. VA31B, SHPT rel. 1.3, M959 XL rel. 3.8 Note: Magicview could be linked to XL direct (i.e., Local Print) or over Camera Server Setup: n on Siemens MagicView rel. VA31B install Camera Config.File M959_XL n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on SHPT set Density & Contrast depending on chemistry n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right n on XL Input Module install LUT TLII_959 Linear-in-Density p/n 78.8079.9817.0

Siemens RS232 25-to-9 25 pin side 2 3 7,1 18 25 Host Adaptor Cable pinout 9 pin side 4 6 1 5 9 M959 XL Setup: n on COMM Menu:





Siemens MagicView VA31B with Kodak DryView 8100 LASER IMAGER


UKEIB


Host


SPCI

SPDI




DryView 8100

Imager

RS422 9-pole Plug

Requirements: Siemens MagicView rel. VA31B, SHPT v1.3, 8100 v1.1 Note: Magicview could be linked to 9410 direct (Local Print) or over Camera Server Setup: n on Siemens MagicView rel.VA31B install Camera Config.File DRY_VIEW n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=75, P1,…,P6=0

n on IMAGE QLTY-> Mag Scaling=On, Pixel Correct=On, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=WRKSTN2A n on LOCAL PANEL Menu: Contrast=2, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=8, Header/Line, Parity=Disable



MagicView 1000 with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


DPCCopper Cable

DPI4-to-DPC Cable

UKEIB


Host


SPCI

SPDI




Fiber Cable

Fiber Cable


9410 PACS Link

3M 8700 DryView

DryView 8700 Plus

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: SHPT v1.3, 9410 v1.6, 8700 v1.34 Note: Magicview could be linked to 9410 direct (Local Print) or over Camera Server Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into MagicView Camera Config.File

Setup: n on Siemens MagicView rel.VA31B install Camera Config.File DRY_VIEW n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right






on Device Setup, HOST KEYPADS: n Kpad=mv, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8700, Film Destination=Processor, Printer1=8700(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Wrkstn2a.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=2, D=14 8700 Plus Setup: n on COMM Menu: 969 Default n on IMAGE Menu: TFT=VER693C0, Dmax=3.00, Contrast=6, Density=14 n on EIB Menu: Pixel=12, Header/Line, Parity=Enable Even, Port=0, Timeout=60



MagicView 1000 via SPCI/SPDI with Kodak PACS LINK 9410 ACQUISITION SYSTEM Software v1.6 /


DPCCopper Cable

DPI4 Cable

UKEIB


Host


SPCI

SPDI




DryView 8100

Control 9-pin

Data 37 pin

DPC-to-UKEIB Cable

9410 PACS Link


RS4229-pole Plug

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: SHPT v1.3, 9410 v1.6, 8100 v2.4.1 Note: Magicview could be linked to 9410 direct (Local Print) or over Camera Server Setup: n on MagicView install Camera Config.File DRY_VIEW (or if problems XL) n on SHPT Service Screen set Modality=Sienet, Camera Type=XL, Timeout=75 n on UKEIB set ON/OFF/ON/OFF/OFF/ON, Switch=Right






on Device Setup, HOST KEYPADS: n Kpad=mv, Hosp=siemens, Serial=DPI4 A Host, Image=DPI4 A DATA n Available Printer=8100, Film Destination=Processor, Printer1=8100(Processor) n 300 DPI=Off, Scale Magnif.=Off, Scale Format / Pixel Correction=On n TFT/ULUT=Wrkstn2a.w87, Multi-Printer Response=Off, Autoswitching=Off n Mem.Full Response=On, Image Size Mode=On, Alarm Mode=On n into Defaults: Destination=Printer 1, Media Size=14x17, C=2, D=14 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0




MagicView 1000 via SPCI/SPDI with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 /





Kodak MIM 200

SPCI

SPDI

Kodak 160 camera



Fiber Cable


SiemensCameraServer

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: MIM 200 v6.1, KELI 160 v7.2 Note: Magicview could be linked to MIM200 direct (Local Print) or over Camera Server MagicView Setup: on MagicView VA31B install Camera Config.File XLP MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON



n on Config,, Input, Direct Connect, Config.Add, Digital, Qual.=MagicView Wkst.: n Board/Channel=Digital Board 1 Channel 1, Logical Name=mv, n Mod.Name=mv, Primary Control: Type=Siemens SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off



n on Configure, Destination, Add, Print, Direct, Qualified, KELI 160, Set: n General: Log.Name=KELI 160, IPAddr=100.100.100.30, n General: Database Name=KELI 160, Model=KELI 160 n Media Info: Media=35x43cm, 4361x5348, 5228, Any (Blue,Clear) n Supported Item: Collation=On, Text=On, Tonescaling on Image=On n Supported Item: Pivot Density=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On



n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:












Kodak MIM 200

SPCI

SPDI

Kodak 2180 camera



Fiber Cable


SiemensCameraServer

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: MIM 200 v6.1, KELP 2180 v2.17H Note: Magicview could be linked to MIM200 direct (Local Print) or over Camera Server MagicView Setup: on MagicView VA31B install Camera Config.File Kodak 2180 MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON






n on Configure, Destination, Add, Print, Direct, Qualified, KELP 2180, Set: n General: Log.Name=KELP2180, Database Name=KELP 2180 n General: Model=KELP 2180, Memory=24, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4136x5160, 5030, (Blue) n Media Info:Media=35x35cm,4136x4136,4006, (Blue) n Media Info: Media=11x14in, 3240x4136, 4006, (Blue) n Media Info: Media=8x10in, 2290x2840, 2710, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bil=On, Repl=On,Cubic=On, Cubic 2=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On



n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=2 n Formatting: Pixel Pitch=12.6582 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.2 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:












Kodak MIM 200

SPCI

SPDI

Kodak 1120 camera



Fiber Cable


SiemensCameraServer

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: MIM 200 v6.1, KELP 1120 v2.40/032 Note: Magicview could be linked to MIM200 direct (Local Print) or over Camera Server MagicView Setup: on MagicView VA31B install Camera Config.File Kodak 1120 MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON






n on Configure, Destination, Add, Print, Direct, Qualified, KELP 1120, Set: n General: Log.Name=KELP1120, Database Name=KELP 1120 n General: Model=KELP 1120, Memory=20, Node ID=6 or accordingly n Media Info: Media=35x43cm, 4096x5132, 5034, (Blue) n Media Info: Media=35x35cm, 4096x4108, 4010, (Blue) n Media Info: Media=11x14in, 4096x3232, 3134, (Blue) n Media Info: Media=8x10in, 2304x2900, 2802, (Blue) n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On



n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=3, Min Vert Sep=0 n Formatting: Trim Width Enabled=0, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.5 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=2.8 n M952 Usage: Min H/V Mag=0, Max H/V Mag=0, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu:












Kodak MIM 200

SiemensCameraServer

SPCI

SPDI


Fiber Cable


Fiber Cable

3M 8700 DryView



Requirements: Siemens MagicView 1000 rel. VA31B Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual and HQ cameras


MagicView Setup: on MagicView VA31B install Camera Config.File DRY_VIEW MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON

i.e., delivering +12V in case of Hirschmann converter on Siemens Control Cable n on Configure, Network: n Node Name=MIM, IPAddr=accordingly n Subnet Mask=accordingly, Gateway Addr=accordingly n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=MagicView Wkst:

n Board/Channel=Digital Board 1 Channel 1, Logical Name=mv, n Mod.Name=mv, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off



n on Configure, Destination, Add, Print, Direct, Qualified, 8700, Set: n General: Log.Name=8700 n General: Database Name=8700, Model=8700, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd=SuperSet,Baud=19200,Data=8,Stop=1,Parity=None n Output Params: Pixel=12, Header/Line, Transfer=2000 KHz, Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On



n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=12.8205 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3.1 n M952 Usage: Min H/V Mag=1, Max H/V Mag=64, Min Dmax 952=1.7 n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8700, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options:

n Orientation=P, Copies=01, Smoothing Type=0, Film Contrast=2 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Wrkstn2a.w87, Auto Study=Off, Console=On, Annotation=Off









Kodak MIM 200

SPCI

SPDI




Control 9-pin

Data 37 pin

Kodak DryView 8100

RS4229-pole Plug

SiemensCameraServer

Requirements: Siemens MagicView 1000 rel. VA31B Requirements: MIM200 v6.1, 8100 v2.4.1 MagicView Setup: on MagicView VA31B install Camera Config.File DRY_VIEW MIM200 Setup: n inside the 232-to-422 25-to-15-pin Converter Box set S1.1=ON, S1.2=ON



n on Config, Input, Direct Connect, Config.Add, Digital, Qual.=MagicView Wkst: n Board/Channel=Digital Board 1 Channel 1, Logical Name=mv, n Mod.Name=mv, Primary Control: Type=3M - SPCI, Com Port=4 n Aux.Control=Conv.Kpad, Com Port=5, Ratio=1,1, Page Prealloc.=Off n on Configure, Input, Direct Connect, Parameters Acquisition, Modify, Set: n Pixels=64, Lines=64, Parity=None, Timer=59, Sync=Off, Pixel=8 n on Configure, Input, Direct Connect, Parameters Autofilming, Modify, Set: n COM4, 2400, RS422, 7, 2, Odd, Ack Wait Timer=2, Start Timer=1 n Interpolation Sharp=0, Interpolation Smooth=0 n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set:

n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On




n at MIM Kpad: press Control (Ready to Store appears), Menu, Service Menu: n into Machine Setup Menu set: Tonescaling=Perception LUT n at MIM Kpad: press Control (Ready to Store appears), Menu, Destination Setup n Select Destination=8100, Media Size Select=35x43 n at MIM Kpad: press Control (Ready to Store appears), Menu, Imaging Options: n Orientation=P, Copies=01, Smoothing Type=0, Film Contrast=2 n Image Dmax=3.00, Border=Black, Collation=Off, Auto Print=On n TFT/ULUT=Wrkstn2a.w87, Auto Study=Off, Console=On, Annotation=Off 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0 n on IMAGE QLTY-> Mag Scaling=Off, Pixel Correct=Off, 952 Override=Off n on IMAGE QUALITY-> TFT FILES Menu: TFT=ver693c0.w87 n on LOCAL PANEL Menu: Contrast=6, Density=3.00 n on SYSTEM Menu: Acquire=Digital, Max.Img.Columns=4361 n on DIGITAL Menu: Pixel Depth=12, Header/Line, Parity=Even



Siemens Magicview via DICOM with Kodak DryView 8300 LASER IMAGER

Siemens Magicview

DryView 8300

DICOM Network

Requirements: Siemens Magicview rel. VA32 Requirements: 8300 v4.9.1, 8300 DICOM board v3.3, 8300 LUT v3.0.3B Note: Image Data lutted by MagicView, linear-in-Density LUT into Camera MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8300_Dicom, - DICOM services=PRINT_SCP, aet=8300, port=104, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed e.g., 1=kodakd 3M_DryView_8300_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView 8300 Setup: n on 8300 Operator Menu into Configure User set:

n Density=16 n Contrast=1 n Sharp/Smooth=1 n Film Layout : Format=1 on 1, Mode=Portrait

n on 8300 Service Menu into Configure User set: n Modality Group=4 (i.e., LUT=linear-in-Density)



Siemens MagicView VA32 via DICOM with Kodak Digital Science 190 MEDICAL LASER PRINTER

Siemens MagicView

DICOM Network

Kodak 190 camera

Requirements: Siemens MagicView rel. VA32, 190 rel. 1.7.29 MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=K190 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_190_Dicom, - DICOM services=PRINT_SCP, aet=190, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed e.g., 1=kodakd Kodak_190_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView 190 Setup: n On 190 Control Panel press Menu, Setup: n Printer Density=3.00, Curve Shape=0.0, Contrast=0, Contrast Pivot Density=1.2 n IPAddress=accordingly, Subnet Mask=accordingly, Gateway Address=accordingly n Port=5040, Network Node Name=Kodak MLP190, Connection Type=RJ45





Siemens MagicView

8700 Plus

9410 PACS Link

DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Siemens MagicView 1000 rel. VB32, 9410 v1.6, 8700 v1.34 Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into 9410 Local Printers and in case of 8500 and HQ by installing 8500 and HQ into MagicView DICOM Camera Config.File

MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8700 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8700_Dicom, - DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8700_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView




n Printer=8700, Model=8700, Output=Fiber n Baud=19200, Parity=None, Data=8, Stop=1, Command Set=Superset n Pixel=12, Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=2, Max.Density=300, Contrast=6, Border Density=0 n TFT/ULUT Emulation=On, Installed TFT/ULUT=Ver693c0.w87


n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=SCU_DBP, SCU IPAddr=accordingly, SCP=8700 n SCP=8700, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0






Siemens MagicView


DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Siemens MagicView 1000 rel. VB32, 9410 v1.6, 8100 v2.4.1 MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8100 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8100_Dicom, - DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8100_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView






on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8100, Copies=1, Contrast Table=2, TFT/ULUT=Wrkstn2a.w87 n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=0 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0 8100 Setup on CONFIGURATION Menu: n on SIB board (i.e., external switch below Control plugs): SW1=Down n on COMMUNICATIONS Menu: n Parity=Even, Stop=1, Data=8, 1200 baud, EOM=CR, Protocol=831/952 n Mem.Full=BSY, Alarm=Old, Acquire Timeout=60, P1,…,P6=0







Kodak DryView 8300


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Siemens MagicView 1000 rel. VB32 Requirements: 9410 v1.6, 8300 v4.9.1, 8300 LUT v3.0.3B MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8300_Dicom, - DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8300_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView






n on Device Setup, SCP PRINTERS, Registered Users: n SCU AETitle=MERGE_PRINT_SCU, SCU IPAddr=accordingly n SCP=8300, Copies=1, Contrast Table=1, TFT/ULUT=wrkstn83a.w8u n Max.Density=300, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=No, Priority=Low n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0







Kodak DryView 8610


DICOM Network

Control 9 pin

Data 37 pin


Requirements: Siemens MagicView 1000 rel.VB33, 9410 v1.6, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by MagicView, linear-in-Density LUT into Camera MagicView Setup (using 8600 Config.File): - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8610 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8600_Dicom, - DICOM services=PRINT_SCP, aet=9410, port=1024, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8600_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView To verify True Size on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set:


Background R=0, G=0, B=0



9410 Setup: n on SCP PRINTER Menu, Current Provider, SCP Parameters: n Printer=8610, SCP AETitle=9410, Port=1024, Max.Associations=5 n on SCP PRINTER Menu, Registered User: n SCU AETitle=accordingly, SCU IPAddr=accordingly n SCP=8610, Copies=1, Contrast Table=6 n Max.Density=350, Border Density=0, Mag.Type=8, Smoothing=1 n Polarity=1, Orientation=1, Set Req.Image Size=Off, Priority=Low n Gamma Table=Linear in Density, Contrast Group=1, Kernel Group=1 n Interceptor=Yes, N-Event-Print Job=No, N-Event Printer=No n Trim=No, Attribute Warning=No n Contrast Test Mode=No, Contrast Test Mode Density=0

n on LOCAL PRINTER Menu: n Printer Name=8610, Model=8600/8610, Output Board=Copper n Baud Rate=1200, Parity=Even, Data=8, Stop=1, Command Set=952 n Pixel=12 (8 if 8600), Header/Line, Timeout=60, Transfer Rate=2 MHz n Film Mismatch=Print Always, Interpolation Type=831 n Interp Num=1, Installed TFT/ULUT=don’t care n Max.Density=350, Contrast=6, Border Density=0


n Imager=2.4, VRTX32=1.08, Contrast=6.P.2, Conv.Kernel=M.1.0 n (if 8600: Imager=2.5, VRTX32=1.08, Contrast=6.G.7, Conv.Kernel=1.0.5)

n on 8610 Operator Menu into Configure User set: n Density=16, Contrast=6, Sharp/Smooth=1, Film Layout: 1 on 1=Portrait n Gamma Table=Linear OD, Image Size=Scale To Fit, Detector Size=don’t care






Siemens MagicView

Kodak MIM 200

DICOM Network


Kodak 160 camera

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, KELI 160 v6.1 MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=K160 Dicom Printer, - modality type=DICOM_PRINTER, - camera type=Kodak_KELI_160_Dicom (or Kodak_MLP_190_Dicom), - DICOM services=PRINT_SCP, aet=160, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd Kodak_KELI_160_Dicom

(or 1=kodakd Kodak_MLP_190_Dicom ) - exit/exit (i.e., in order to return to main menu) and reboot MagicView






DICOM Network

Fiber Cable

Kodak 2180 camera

Kodak MIM 200 Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, 2180 v2.17H MagicView Setup: - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=K2180 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_2180_Dicom, - DICOM services=PRINT_SCP, aet=2180, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd Kodak_2180_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView







n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=Curve Shape (Always=Y) n Curve Shape=0 (Always=Y), Contrast (wet)=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Interpolation=No Magnif n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Film Output Dest=Bin 9 (Always=N) n Negotiate Color Print=Off







DICOM Network

Fiber Cable

Kodak 1120 camera

Kodak MIM 200 Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, 1120 v2.40/032 Note: due to a swap of the columns with rows the film size 11x14 is not working MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=K1120 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_1120_Dicom, - DICOM services=PRINT_SCP, aet=1120, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd Kodak_1120_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView






Kodak MIM 200

DICOM Network


Kodak DryView 8200

Requirements: Siemens MagicView 1000 rel. VB32B Requirements: MIM200 v6.1, 8200 v3.5 Note: This setup is basically also valid for 25 PS computer MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=K8200 Dicom Printer, - modality type=DICOM_PRINTER, - camera type=Kodak_DryView_8200_Dicom (or Kodak_MLP_190_Dicom), - DICOM services=PRINT_SCP, aet=8200, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8200_Dicom

(or 1=kodakd Kodak_MLP_190_Dicom ) - exit/exit (i.e., in order to return to main menu) and reboot MagicView MIM200 Setup: n on Configure, Network:









DICOM Network

3M8700 DryView

Fiber Cable

Fiber Cable

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, 8700 v1.34 Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8800/8700 Dual, 8500 Plus,

8800/8500 Dual and HQ cameras by basically using the correspondent Model into MIM200 Destination and in case of 8500 and HQ by installing 8500 and HQ into MagicView Camera Config.File

MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8700 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8700_Dicom, - DICOM services=PRINT_SCP, aet=8700, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8700_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView







DICOM Network


Data 37-pin

RS4229-pole Plug

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, 8100 v2.4.1 Note: This setup is basically also valid for 25 PS computer MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8100 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8100_Dicom, - DICOM services=PRINT_SCP, aet=8100, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8100_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView MIM200 Setup: n on Configure, Network:



n on Configure, Destination, Add, Print, Direct, Qualified, 8100, Set: n General: Log.Name=8100 n General: Database Name=8100, Model=8100, Memory=32 n Media Info: Media=35x43cm, 4096x5223, 5133, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12, Header/Line, Transfer=1000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On







DICOM Network

Control 9 pin

Data 37 pin


Requirements: Siemens MagicView 1000 rel. VB32 Requirements: MIM200 v6.1, 8300 v4.9.1, 8300 LUT v3.0.3B Note: This setup is basically also valid for 25 PS computer MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (i.e., to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8300 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8300_Dicom, - DICOM services=PRINT_SCP, aet=8300, port=5040, IPaddr=accordingly - RETURN, exit, exit (i.e., in order to return to main menu) - from main menu do: install/net - exit (i.e., in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (i.e., to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8300_Dicom - exit/exit (i.e., in order to return to main menu) and reboot MagicView MIM200 Setup: n on Configure, Network:


n on Configure, Input, Network, Add: n Protocol=DICOM 3.0, Log.Name=DICOM, Type/Com=Keypad/COM9 n on Configure, Destination, Add, Print, Direct, Qualified, 8300, Set: n General: Log.Name=8300 n General: Database Name=8300, Model=8300, Memory=32 n Media Info: Media=8x10in, 2256x2676, 2596, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=8, Header/Line, Transfer=2000 KHz, Acquire=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On



n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On, SuperSlide=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix on Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img per Band=20, Max Band per Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=11.811 n Image Processing: Grayscale=On, Minify=On, Max Image Dmax=3 n M952 Usage: Min H/V Mag=1, Max H/V Mag=16, Min Dmax 952=1.5 n on Configure, SCP Services, select the specific modality, Modify:

n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT=wkstn83a.w8u (Always=Y), Contrast (dry)=1 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Print Priority=Normal (Always=N), Image Polarity=Normal (Always=N) n Smoothing Type=1 (Always=N) n Border=Black (Always=N), Film Base=Blue Film (Always=N) n Film Size=8INx10IN (Always=N), Negotiate Color Print=Off




MagicView 1000 via DICOM with Kodak PACS LINK MEDICAL IMAGE MANAGER 200 Software v6.1 / Kodak DryView 8610 LASER IMAGING SYSTEM / for Mammography

(see also 8600)

Requirements: MagicView 1000 rel.VB33 Requirements: MIM200 v6.1, 8610 v2.4 (if 8600 v2.5) Note: This setup is basically also valid for 25 PS computer Note: This setup is basically also valid for 8600 camera Note: Image Data lutted by MagicView, linear-in-Density LUT into Camera MagicView Setup (using 8600 Config.File): - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8610 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8600_Dicom, - DICOM services=PRINT_SCP, aet=8610, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter number of printer to be installed eg 1=kodakd Kodak_DryView_8600_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView To verify True Size on the printed film, set on MagicView: - select the Print icon and into menu Setup/Layout under Segment Settings set:


Background R=0, G=0, B=0 MagicView Setup to print images with Dmax=350: - into Service Login (at Unix level),

edit density.dat file and set 350 Dmax value for digital-mammo images ie


Kodak DryView 8610

Kodak MIM 200

DICOM Network

Control 9 pin

Data 37 pin




n on Configure, Destination, Add, Print, Direct, Qualified, 8610 (or 8600), Set: n General: Log.Name=8610 (or 8600) n General: Database=8610 (or 8600), Model=8610 (or 8600), Mem=32 n Media Info: Media=8x10in, 5025x6200, 6020, Blue n Output Params: Cmd Set=952, Baud=1200, Data=8, Stop=1, Parity=Even n Output Params: Pixel=12 (8 if 8600),Header/Line,Transfer=2000,Acq=60 n Supported Item: Collation=On, Text=On, Tonescaling=On, Rotation=On n Interpolation: NoMag=On, Bilin=On, Repl=On,Cubic Spline=On n Format Types: Custom=On, Slide=On, Row Symmetric=On n Format Types: 1, 2, 4, 6, 8, 9, 12, 15, 16, 20, 24, 30, 35=On n Formatting: Aspect Ratio Mix Page=On, Image Size Mix in Std Fmt=On n Formatting: DICOM Annotation Box=On, Req.Size Scale=On n Formatting: Req.Size Mix in Row=On, Trim=On n Formatting: Aspect Ratio Mix in Row=On, Image Size Mix in Row=On n Formatting: Req.Image Size=On, Req.Size Mix on Page=On n Formatting: True Landscape=On n Formatting: Max Img Band=20, Max Band Page=20, Max Img Col=0 n Formatting: Max Img Row=0, Min Horiz Sep=2, Min Vert Sep=2 n Formatting: Trim Width Enabled=2, Trim Width Disabled=0 n Formatting: Pixel Pitch=25.8065 n Image Processing: Grayscale=On, Minify/Crop=On, Max Image Dmax=3.5 n M952 Usage: Min H/V Mag=0.26, Max H/V Mag=16, Min Dmax 952=2

n on Configure, SCP Services, select the specific modality, Modify: n PLUT=N, ToneScaling=PerceptionLUT (Always=Y) n TFT/ULUT= upmsv3kp.w8u (Always=N), Contrast (dry)=6 (Always=N) n Modality Group=1, Conv.Group=1, Gamma Table=Linear in Density n Image Dmin=0.00 (Always=N), Image Dmax=3.50 (Always=N) n Smoothing Type=1 (Always=N), Image Polarity=Normal (Always=N) n NeventReports=Off (Always=Y), Warning Status=On n Print Date=Off, Print Time=Off, Page Number=Off, Hosp.Name=Off n Modality ID=Off, Annotation Override=Off (Always=N) n Minify/Scale=On, Crop=Off, Source ID=nova n Print Priority=Normal (Always=N), Border=Black (Always=N) n Film Base=Blue Film (Always=N), Film Size=8INx10IN (Always=N) n Negotiate Color Print=Off 8610 Setup: on 8610 Operator Menu into Test Menu, Software Version, verify:







Requirements: Siemens MagicView 1000 rel. VB32 Requirements: 8900 rev.E ie v2.11 (ie DRE v2.11, MIM v5.6.b5, MCS v2.10) MV Setup (using Kodak 8200 or 3M M969 HQ Config.file, easier config.): - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8900 Dicom Printer, - modality type=DICOM_PRINTER, camera type= Kodak_DryView_8200_Dicom, - DICOM services=PRINT_SCP, aet=8900, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter nbr of the printer to be installed eg 1=kodakd Kodak_DryView_8200_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView MagicView Setup (creating 8900 by modifying files, only if True Size needed): - into Service Login (at Unix level) in /home/cs_root/data/camera directory


Kodak_DryView_8900_Dicom 14x17 350.75x427.03 4488x5464 325 Kodak_DryView_8900_Dicom 14x14 350.75x350.75 4488x4488 325 Kodak_DryView_8900_Dicom 11x14 274.63x350.75 3514x4488 325 Kodak_DryView_8900_Dicom 10x12 248.84x299.17 3184x3828 325 Kodak_DryView_8900_Dicom 8x10 197.57x248.84 2528x3184 325

cd /home/cs_root/data/camera vi dbp_camera_types.dat

SiemensMagicView 1000workstation

DICOM Network

Kodak DryView 8900



add the following line: Kodak_DryView_8900_Dicom - reboot MagicView - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8900 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8900_Dicom, - DICOM services=PRINT_SCP, aet=8900, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter number of the printer to be installed eg 1=kodakd Kodak_DryView_8900_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView - at this point only a default-Layout ie printing format is available for 8900 - other Layouts ie other printing formats could be manually genarated



from main menu do: hc_install/modify/copy layouts input=Kodak_KELP_2180_Dicom output=Kodak_DryView_8900_Dicom

- reboot MagicView 8900 Setup: n on Configuration, System, Network:



n on Configuration, Destination: n General: Log.Name=8900 n Media Types: Media=35x43cm, 9100x11037, 10781, Any n Media Types: Media=35x35cm,9100x9087, 8831, Any n Media Types: Media=11x14in, 7137x9100, 8844, Any n Media Types: Media=10x12in, 6490x7767, 7511, Any n Media Types: Media=8x10in, 5167x6490, 6234, Any n Formatting: Aspect Ratio Mix Page=On, Aspect Ratio Mix Row=On n Formatting: Image Size Mix in Std Fmt=On, Image Size Mix Row=On n Formatting: DICOM Annotation Box=On, Req.Image Size=On n Formatting: Req.Size Scale=On, Req.Size Mix Page=On n Formatting: Req.Size Mix Row=On, Trim=On, n Formatting: True Landscape=On, Rotation=On n Formatting: Minify/Crop=On, Tonescaling on Image Basis=On n Formatting: Max Img Band=7, Max Band Page=7, Max Img Cols=0



n Formatting: Max Img Rows=0, Pixel Pitch=25.5910, Min Horiz Sep=4 n Formatting: Min Vert Sep=4, Trim Width Enabled=4 n Formatting: Trim Width Disabled=0, Maximum DMAX=3.30

n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify: n Negotiate Presentation LUT=No, Negotiate Color Print=No n TFT= Wrkstn2a.w87 (Always=Y), Contrast=2 (Always=Y) n Smoothing Type=0 (Always=Y) n Image Dmin=0.00 (Always=N), Image Dmax=3.00 (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, Film Base=Blue Film (Always=N) n Film Size=14INx17IN (Always=N), Sorter Bin=Bin1 (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N) n Text Box Location=None, Source ID=mv




Requirements: Siemens MagicView 1000 rel. VB32 Requirements: 8150 v0.08.b6 (DRE=DV8150_DRE_0.08.b6, MIM=MIM_v5.7.b6) MV Setup (using Kodak 8200 or 3M M969 HQ Config.file, easier config.): - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8150 Dicom Printer, - modality type=DICOM_PRINTER, camera type= Kodak_DryView_8200_Dicom, - DICOM services=PRINT_SCP, aet=DV8150, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter nbr of the printer to be installed eg 1=kodakd Kodak_DryView_8200_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView MagicView Setup (creating 8150 by modifying files, only if True Size needed): - into Service Login (at Unix level) in /home/cs_root/data/camera directory


Kodak_DryView_8150_Dicom 14x17 346.70x421.07 4438x5390 325 Kodak_DryView_8150_Dicom 14x14 346.70x344.82 4438x4414 325 Kodak_DryView_8150_Dicom 11x14 268.73x346.70 3440x4438 325

cd /home/cs_root/data/camera vi dbp_camera_types.dat add the following line:

Kodak_DryView_8150_Dicom


DICOM Network

Kodak DryView 8150



- reboot MagicView - into Service Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=DV8150 Dicom Printer, - modality type=DICOM_PRINTER, camera type=Kodak_DryView_8150_Dicom, - DICOM services=PRINT_SCP, aet=DV8150, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter numbr of the printer to be installed eg 1=kodakd Kodak_DryView_8150_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView - at this point only a default-Layout ie printing format is available for 8150 - other Layouts ie other printing formats could be manually genarated



from main menu do: hc_install/modify/copy layouts input=Kodak_KELP_2180_Dicom output=Kodak_DryView_8150_Dicom

- reboot MagicView 8150 Setup: n on Configuration, System, Network:




n on Configuration, DICOM SCP, SCP Services, select specific modality, Modify:



n Negotiate Presentation LUT=No, Negotiate Color Print=No, n TFT Set Name=Wrkstn2a.w87 (Always=Y) n Contrast=1 (Always=Y), Smoothing Type=0 (Always=Y) n Dmin=0.00 (Always=N), Dmax=3.00 (Always=N) n Image Polarity=Normal (Always=N) n NeventReports=No (Always=Y), Warnings=Yes n Print Priority=Normal (Always=N), Border=3.99 (Always=N) n 2mm Border=Yes, Film Clip Border=No, n Film Base=Blue Film (Always=N), Film Size=14INx17IN (Always=N) n Print Date=No, Print Time=No, Page Nbr=No, Hosp.Name=No, n Modality ID=No, Annotation Override=No, Density Patch=No n Image Resizing=Minify/Scale (Always=N), n Text Box Location=None, Source ID=mv



MagicView 1000 via DICOM with Kodak Color Medical Imager 1000

Requirements: Siemens MagicView 1000 rel. VB32 Requirements: CMI-1000 v1.0.b8 (DRE=v1.0.b8, MIMCore=v2.0.b3) MagicView Setup: - into Sevice Login (at Unix level), logged as sit install from main menu do: - edit/config/create (ie to configure the DICOM printer as separate node) - node name=kodakd (max 6 chars), component name=CMI1000 Dicom Printer, - modality type=DICOM_PRINTER, camera type=3M_DryView_8300_Dicom, - DICOM services=PRINT_SCP, aet=CMI1000, port=5040, IPaddr=accordingly - RETURN, exit, exit (ie in order to return to main menu) - from main menu do: install/net - exit (ie in order to return to main menu) and reboot MagicView - from main menu do: hc_install/install devices/install (ie to select the printer) - enter number of the printer to be installed eg 1=kodakd 3M_DryView_8300_Dicom - exit/exit (ie in order to return to main menu) and reboot MagicView CMI-1000 Setup: at Local Panel, under Media, set A4 or Letter ie what inside Paper Tray (CMI-1000 sw considers only this field and uses it as A4 or Letter (Always=Y): at Local Panel, under Menu, Imager Setup: n Network Setup:





n Contrast=7 (Always=Y) n TFT Set (From list)=Wrkstn2a.w87 (Always=Y)

DICOM Network

Kodak CMI 1000




n Wet Contrast=0 (Always=N), Curve Shape=429 (Always=N) n under More Quality Settings: n Tonescaling=Presentation LUT (Always=N), n Image Dmax=220 (Always=N), Image Dmin=10 (Always=N) n Smoothing=0 (Always=N), Polarity=Positive (Always=N) n Interpolation=CUBIC (Always=N), Trim=No (Always=N) n Page Orientation=PORTRAIT (Always=N), Negotiate PLUT=No



siemens setup manuals

Documents