kojin mould case study
TRANSCRIPT
![Page 1: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/1.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Kojin Mould Case Kojin Mould Case StudyStudyLiu PeilingCAPT Group
NC Verification
![Page 2: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/2.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
AgendaAgenda Introduction NC Program Errors Requirements for Kojin Mould Commercial Solutions Our Approach
– “WhatYouSee is WhatYouCut” NC Verification Samples in
Practice
![Page 3: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/3.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Our Client --- Kojin MouldOur Client --- Kojin Mould
Design and manufacture plastic molds. A wholly owned subsidiary of Omni
Industries Limited. Over 60 employees including
– 3 mold designers– 7 NC programmers using 4 seats UG CAM– One seat VERICUT 4.0 for NC simulation
![Page 4: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/4.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
What is NC Verification?What is NC Verification?
Check NC Code Safety
– No cutter clash or damage– No cut clamps or fixtures
Quality – No undercut or gouge– All appropriate stock
removed – Surface finish and tolerance– Air cut
(33C1B-DIA 63-R6.0)(18-MAR-00)G90G0X0Y0Z100.G05P10000G00X-82.898Y14.76Z3.Z2.217G01Z-.783F1500X-52.898X-44.215Y-12.904...
![Page 5: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/5.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
NC Program Errors 1NC Program Errors 1
The Low Quality of The Low Quality of SurfacesSurfaces The surface deformation.
– Example: data exchange problem. The surface tolerances are too low.
– Example: 0.1mm. The geometry data defects.
– Example: there are gaps between surfaces.
![Page 6: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/6.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
NC Program Errors 2NC Program Errors 2
Unstable CAM AlgorithmsUnstable CAM Algorithms Path planning is a very difficult
task. There is no exact offset solution
for free form curves and surfaces The toolpath sampling method
varies quite differently.
![Page 7: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/7.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Toolpath planning errors, too many jumps Un-uniform water level cut
plungezigzag
Offset calculation errors Water level toolpath become zigzag
![Page 8: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/8.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
10 meters arc
10 meters arc
10 meters arc
NC Program Errors 3NC Program Errors 3
The Post-Processor BugsThe Post-Processor Bugs
![Page 9: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/9.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
NC Program Errors 4NC Program Errors 4
The Human ErrorsThe Human Errors The patching up of surfaces. Plan machining process. Wrong part face, check face and
boundary choice. Wrong machining set-up. Wrong cutting parameters
![Page 10: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/10.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Why They Need NC Verification? 1Why They Need NC Verification? 1
The 3D CAM MigrationThe 3D CAM Migration The 3D CAM requires more NC
programs and programmer than 2D CAM.– NC program exceeds one million
lines– One designer needs two NC
programmers– Using sub-contractor for NC
programming
![Page 11: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/11.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Why They Need NC Verification? 2Why They Need NC Verification? 2
High Speed MachiningHigh Speed Machining The fast NC verification of huge tool path
– The HSM requires over half million blocks of G/M code. The simulation process must be quicker than test cut.
Dynamic simulation of the cutting process– The HSM feed rate could be ten meter per minute. The cutter
will break under uneven load.
Automatic check over-cutting and gauging– Visual check is time consuming and unreliable.
![Page 12: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/12.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Why They Need NC Verification? 3Why They Need NC Verification? 3
Outsourcing Outsourcing ManufacturingManufacturing
Product designer - HP Contract manufacturer - Omni Industry
Mold maker - Kojin MouldMold designer - Super SolidCAM programmer - SINCAMElectrode maker - Atech
Outsourcing NC programs
![Page 13: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/13.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Requirements from Kojin Requirements from Kojin MoldMold Cut SafeCut Safe
– Instant check for overcut & gougingInstant check for overcut & gouging– Quick check for High Speed
Machining Cut better
– Surface roughness simulation Cut faster
– Air cut removal
![Page 14: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/14.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Commercial SolutionsCommercial Solutions Animated pictures made of pixels Rough View
angle dependent
Machining load ?
zoomed pixels
![Page 15: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/15.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Problem with view-angle dependant:Strait edges become zigzag after rotation
![Page 16: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/16.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Our ApproachOur Approach 1 1
WYSWYC WYSWYC what you see is what you cut
machine table
block
roughing
finishing
![Page 17: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/17.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
smooth vertical walls along curves
Our Approach 2 Our Approach 2
Rotate & Zoom to See Rotate & Zoom to See DetailDetail
![Page 18: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/18.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Overcut error
toolpath
car model
Our Approach 3Our Approach 3
Instant Check for Overcut Instant Check for Overcut
![Page 19: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/19.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Our Approach 4Our Approach 4
FasterFaster Batch ProcessingBatch Processing Traditional simulation does it step by step
Read one block of NC code Parsing to check grammar errors Generating sweeping volume Subtract this sweeping volume from Z buffer Update display
There is no grammar error for CAM NC! We can read and simulate the whole NC
file ten times faster than traditional simulation.
![Page 20: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/20.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Our Approach 5Our Approach 5
Interactive Toolpath Interactive Toolpath ControlControl
The NC data text file can be turned off
![Page 21: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/21.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Our ApproachOur Approach 6 6
In-process Stock In-process Stock is a must for next is a must for next step Cutting Plan. step Cutting Plan.
roughing
Middle roughing
Semi finishing
Finishing
We can define We can define intermediate intermediate model as a set model as a set of NC toolpath, of NC toolpath, cutter and initial cutter and initial stock. We only stock. We only need to store need to store these three these three parameters in a parameters in a database. We database. We cancan regenerate regenerate the the intermediate intermediate model anytime model anytime using a NC using a NC simulator. simulator.
![Page 22: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/22.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Out Approach 7Out Approach 7
Output Process Data SheetOutput Process Data Sheet
![Page 23: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/23.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Our Approach 8Our Approach 8 GUI CustomizationGUI CustomizationView toolbarToolpath control stock
Multiple view
inspection
![Page 24: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/24.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Implementation in Kojin Implementation in Kojin MouldMould One seat for CAD/CAM department– with direct UG CLSF interface & STL import– In-process stock to help CAM programmer– Quick process sheet and post-processing
One seat for CAM out-sourcing– G/M code simulation for different CAM
system– Automatic check and documentation
One seat for shop floor machinists– NC tool path and setup preview
![Page 25: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/25.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
How to help NC programmer?How to help NC programmer?
Cut Mould InsertCut Mould Insert
![Page 26: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/26.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
How to Help NC How to Help NC Programmer?Programmer?
Plane
Curve surface
Plane
EDM
Slot
![Page 27: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/27.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 28: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/28.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
How to help NC programmer? 1 How to help NC programmer? 1
Planer Mill to Cut Plane Planer Mill to Cut Plane AreaArea
planer area
![Page 29: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/29.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
planer area
![Page 30: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/30.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
How to help NC programmer? 2 How to help NC programmer? 2
Rough and Finish the Rough and Finish the SurfacesSurfaces
Cut curved surface
Fill this pocket
![Page 31: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/31.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 32: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/32.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
How to help NC programmer? 3 How to help NC programmer? 3
Finish the Small DetailsFinish the Small DetailsLocal mill for small area
![Page 33: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/33.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 34: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/34.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
How to help NC programmer? 4How to help NC programmer? 4
Roughing Pocket for EDMRoughing Pocket for EDM
Clear pocket for EDM
![Page 35: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/35.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
The cutter cannot cut to the designed part shape due to the limitation of cutter size. The EDM process will clean the remaining stock.
![Page 36: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/36.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 37: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/37.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Detail zoom in
![Page 38: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/38.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Detail zoom in
![Page 39: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/39.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 40: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/40.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 41: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/41.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Cellar Phone Mould Core Cellar Phone Mould Core InsertInsert
Plane
Flush face
Curved surface
EDM
![Page 42: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/42.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 43: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/43.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 44: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/44.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 45: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/45.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Fixed Contour for FinishingFixed Contour for Finishing
![Page 46: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/46.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 47: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/47.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 48: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/48.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 49: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/49.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Over cut? Over cut?
Over cut?
![Page 50: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/50.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Over cut?
Over cut?
![Page 51: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/51.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Over cut ?
![Page 52: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/52.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Over cut 0.02?
![Page 53: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/53.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Over cut >0.02?
![Page 54: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/54.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 55: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/55.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 56: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/56.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 57: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/57.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
![Page 58: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/58.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Feedback from Kojin MoldFeedback from Kojin Mold As of early 1999... At present this software not only able to create
the model by the program data , it also : provide the lowest Z value checking of Z level from the model import the actual model and compare both parts together edit of tool path and re-post the program direct read in the CLS files from UG able to zoom in/out with good display able to have dynamic rotation
Lastly we would like to express our appreciation...
![Page 59: Kojin mould case study](https://reader036.vdocuments.net/reader036/viewer/2022070601/587fbfc11a28ab3b158b4e39/html5/thumbnails/59.jpg)
Institute of Manufacturing Technology
Manufacturing Information Technology Division
Thank Thank YouYouLiu PeilingLiu Peiling
Tel: (65) 7938356Tel: (65) [email protected]@gintic.gov.sg