kpr institute of engineering and technology, · mahindra & mahindra ltd. chennai. 8754442297,...

LIST OF PROGRAMS ORGANIZED

1.0 LIST OF WORKSHOP ORGANIZED:

Sl. No.

Date Name of the Programme

Topics in the session

Name of the speaker with contact details

No of participants Faculty Co-ordinator

KPRIET Others Total

1. 20/06/2018

to 21/06/2018

Two days

Workshop on 5’S

Concepts 5’S Concepts

Mrs.S.Yogeswari, Secretary, QCFI Coimbatore Chapter, Coimbatore. 9842253472, [email protected] 30 - 30 Dr.R.Saravana Kumar

Mr.A.S.Shiva Kumaran, QCFI Coimbatore Chapter, Coimbatore, 9345477697

2. 17/03/2018

One day national

level workshop

on “Awareness

in IPR”

Awareness in IPR

Dr.D.Balaji, Assistant Professor (Sl.G.) KPRIET, Coimbatore 7338714790

4 12 16 Dr.D.Balaji

3. 17/03/2018

One day national

level workshop

on “3D Printing” 3D Printing

Mr. Dhanabal, CEO, SPAAR 3D Creative, Coimbatore. 9791903763, [email protected]

61 0 61 Dr.D.Balaji

4. 12/8/2017

one day national

level workshop

on “Welding &

Welding & NDT Techniques used in Oil &

1. K.Senthil Prabhu, Managing Director, (NDT Certified Trainer), UIHMS, Coimbatore.

190 - 190 Mr.B.Arulmurugan &

Mr.D.Balaji

KPR INSTITUTE OF ENGINEERING AND TECHNOLOGY,

Arasur, Coimbatore–641407.

(Approved by AICTE, New Delhi,

Affiliated to Anna University, Chennai)

Accredited by NBA & NAAC with ‘A’ grade

DEPARTMENT OF MECHANICAL ENGINEERING

NDT Techniques

used in Oil &

Gas Industries”

Gas Industries #9894201267 2.K.Manikandan, Engineering Expert, UIHMS, Coimbatore. #9894644890 [email protected]

5. 30/09/2016

& 1/10/2016

Two days

workshop on

“Recent Trends

In Engine

Technology &

Vehicle

Architecture”

SAE and its activities ( Automobile Systems, Job Opportunities, SAE SKIP , Internships and project funding)

Mr. Pradeep Chandrasekaran, President of SAE India Southern Section & DGM, Dimension Division, Mahindra & Mahindra Ltd, Chennai,

102 - 102 Dr.R.Saravanakumar

Mr.S.Sivalingam

Emerging trends in Automobile

Mr. Satinder Kumar Dwivedi, Senior Manager, (Engine, Brake, Transmission,Suspension), Mahindra & Mahindra Ltd. Chennai . 8754442297, [email protected]

Emerging trends in Automobile

Mr. Sathish Kumar B, Senior Manager, Body System, Mahindra & Mahindra Ltd, Chennai , 9884601982, [email protected].

SAE Baja

Mr. Srinivasan Sundaraj S, Deputy General Manager, DESIGN TO MARKETING, Mahindra & Mahindra Ltd, Chennai , 9840720337, [email protected]

6. 6/4/2016 &

7/4/2016

Two days Hands on Training in “Automotive Advancements”

i) 750 cc Single cylinder DI engine ii) 3600 cc four cylinder IDI engine iii) 2600 cc 3 cylinder engine with electronic pump

Mr.Arun.S.K, Chief Engineer, Mr.Vivek.V, General Manager, Audi, Coimbatore. 7373737620, [email protected], 7373737652, [email protected]

20 35 55 Dr.R.Saravanakumar

Mr.S.Sivalingam

7. 21/2/2016 One day Hands on Training in “IC Engines”

IC Engines

Mr.Syed Mohammad Mr.Vasanthakumar, Chief Mechanic, Force Motors, Coimbatore 7868922929

50 - 50 Dr.R.Saravanakumar

Mr.S.Sivalingam

8. 19/2/2016 &

20/2/2016

Two days workshop on “CFD”

Ansys & CFD

Mr. Shrish Shukla, Computational Mechanics Researcher & Research Fellow, Aeronautics Research and Development Board (ARDB), IIT-Delhi.

5 26 31 Mr.P.Suresh kumar

Mr.Vivekananthan

9. 12/2/2016 &

13/2/2016

Two days workshop on “Quadrotor”

Fundamental & Advancements

in “Quadrotor & Unmanned

Aerial Vehiles”

Mr.K.Gopal, Head - Roboversity, Skyfi Labs

Pvt. Ltd, Bangalore. Mobile No. 978832123

40 5 45 Mr.SP.Sathyaprasanth

Mr.S.Ambalarajan

10.22/12/2015

& 23/12/2015

Two Days Hands on Training on “Gasoline & Diesel Engine Management”

Gasoline & Diesel Engine Management

Mr.Kiran G Nair, Training Manager, Bosch Training

Centre, Chennai. 08281077223,

[email protected]

14 Nil 14 Mr.R.Anand kumar

11. 23/09/2015

One Day Work Shop on "Geometric Dimensioning & Tolerancing"

Geometric Dimensioning & Tolerancing

Dr.K.Ganesh, Associate Professor, Department of Mechnical Engineering, PSG Institute of Engineering & Technology, Coimbatore. 9894123331

21 23 44

Mr.Vivekanandan

Mr.D.Vinoth kumar

Mr.Boopala Krishnan

12. 19/9/2015

Inauguration of IWS student Chapter & One day National Level workshop on Welding Technology

Welding Metallurgy

Dr.Mohammed Nazurudheen, Professor, PSG College of Technology, [email protected] Coimbatore.

124 40 164 Dr.M.Manikandam

Mr.B.Arulmurugan

Welding Stress & Distortion Analysis

Dr.N.Raju, DGM, WRI, BHEL,Trichy. [email protected] 9994722100

Fundamentals of welding process& Friction Stir welding

Dr.N.Murugan, Professor, CIT, Coimbatore [email protected] 9751824123

13.28/03/2015

to 29/03/2015

Two wheeler and Four wheeler Technologies

1. IC engines 2. Gearbox 3. Clutch 4. Transmission 5. Differential

Ambal Autos training centre 84 -- 84 Mr.James Deepak D

Mr. Jayanth.D

14.6/09/2014 & 7/09/2014

Advanced IC Engine – Design and Development

2 days industry oriented skill training on IC engines

1. Dr. S. Prabaharan Consultant, Ford India 2.Mr.Praveen PrasathKV Asst. Manager, Mahindra & Mahindra 3. Mr. Rajasekaran M Asst. Manager, Hyundai Motors

103 -- 103 Mr.James Deepak D Mr.N.Vigneshkumar

15. 25/08/2014 Recent trends in IC Engines

Automobile parts and their working

1.Mr.G.Krishnamoorthi Research Scholar, IIT-Madras 2. Mr. S. Prabhu

138 -- 138 Dr.R.Saravanakumar

Mr.James Deepak D

Assistant Professor, KCT

16.27/06/2013 to 29/06/2013

CSIR Sponsored workshop on “Environmental Conscious Technology in Thermal Engineering Systems”

Different IC engine cycles and its improvement areas Heat recovery equipment and their relevance in energy savings

Dr.M.Udaya kumar Professor , Department of Mechanical Engineering, National Institute of Technology, Tiruchirappalli

27 6 33 Mr. Rajesh Kana.S Mr. Nakul Sreedhar

Exergy analysis and it utilization in daily routine

Dr.T.Sridhar Associate Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore

1. Renewable energy 2. Modes of heat transfer

Mr. Rajesh Kana.S Mr. R. Saravana Kumar Mr. G. Krishnamoorthi

17.7/03/2013 & 8/03/2013

CSIR Sponsored National level two days workshop on “TQM Practices in Indian Industries”

1. Quality 2. Basic concepts of TQM 3. Leadership and supplier partnership

Mr.H.Ramasubramaniam Senior General manager Brakes India Ltd., Chennai

46 15 51 Mr. B.Ganesh Mr. A.Saravana Kumar 1. PDSA

2. 5S 3. Kaizen 4. Six Sigma 5. Bench Marking

Mr.K.S.Srinivasan Visiting faculty Catholic University, Kenya

6. FMEA

1. Quality circles 2. Quality function Development 3. Tachuchi method 4. Need for quality 5. Case studies

Mr.R.Vasu Vice president, Brakes India Ltd., Chennai

18.20/09/2013 & 21/09/2013

CSIR Sponsored two days National workshop on “Energy efficient Mechatronics system for Industrial automation”

(i) Control Systems in Mechatronics (ii) Energy efficient Mechatronic systems in HVAC

Mr.Sekar Ramasubramaniam Chief Executive Sigma Solutions, Peelamedu, Coimbatore, 7708733266 [email protected]

84 -- 84 Mr.James Deepak D Mr. N.Vignesh Kumar

Sensors and actuators

Dr.N.Rajam Ramaswamy Associate professor, Department of Mechanical Engineering Coimbatore Institute of Technology Mobile: 9787110150 [email protected]

(i)Industrial automation - Recent trends (ii)Industrial robotics

Dr.B.Vinodh Professor & Head Department of Robotics & Automation Engg. Room No. K309, PSG College of Technology

Coimbatore- 641 004 91 98430 42223 [email protected]

Adaptive control system in CNC machines

Mr. N.Vignesh Kumar

PLC ladder diagrams

Mr.James Deepak D

PLC applications in Automated Industries.

Mr.Siva Sakthi Business development Engineer AGIIT, Peelamedu, Coimbatore. 9655758759 [email protected]

19.28/09/2012 & 29/9/2012

Mechatronics systems and their applications

Sensors, Actuators and Control Systems

Mr.Sathyamoorthy Manager, Technical, Sunrise Automation, Coimbatore

65 48 113 Mr.James Deepak D Dr.M.Sivakumar

PLC, Ladder logics, Signal conditioning

Mr.K.V.Sivasamy Chief Executive, Fullfill Electric Corporation, Coimbatore

Modeling and Simulation of Mechatronics Systems

Dr.T.Periyasamy Manager, R&D-Engines, Mahendra Research Valley, Chennai

Micro Electro Mechanical Systems (MEMS)

Dr.Bindu Salim Department of Electronics and Communication Engineering, PSG Institute of Advanced Studies, Coimbatore

CNC Mr.K. Gowrishankar, Manager

Controllers Senior Sales Manager, LMWMTD, Coimbatore

20. 31/08/2012

Design and development of jigs and fixture for advanced manufacturing industries

Design and development of jigs and fixture

Mr. Ram Prakash Holla, Managing Director, Distinct productivity Solutions, Bangalore

60 177 237 Dr. S.Sivasankaran Mr. T.Prakash

21.

24/8/2012 & 25/8/2012

Composite materials (Curriculum based Programme)

(i)Introduction and overview of composite materials and (ii)Fatigue behavior of particle and whisker reinforced composites

Dr. M. Ramachandra Bhatt, Chief Research Scientist Department of Aerospace Engineering, Indian Institute of Science, Bangalore. Phone: -22933025/22932420 Fax: -23600134, Email:- [email protected]

70 125 195 Dr. P.Sasikumar Dr.S.Sivasankaran Mr.A.Saravana Kumar

(i) Manufacturing of Polymer-Matrix Composites (ii) GFRP with graphite particulate fillers (iii) Need for low velocity impact

Dr. N. Rajesh Mathivanan, Professor Department of Mechanical Engg., P. E. S. Institute of Technology Bangalore 560 085. Mobile: 09483986569

1. Manufacturing, properties and applications of

Dr. V. Krishnaraj, Professor , Department of Mechanical Engineering, PSG College of Technology,

glass fibre, carbon fibre and Kevlar fibre. 2. Processing of polymer matrix composites

Coimbatore, Email: [email protected], Phone: 0422 4344750, Mobile No: 9788454142

(i) Composite Structures and (ii) Composite Joints

Dr.M.Senthilkumar, Professor Department of Mechanical Engineering, PSG College of Technology, Coimbatore, Email: [email protected], Phone: 0422 – 4344252, Mobile No: 9443751578

Smart Materials and its applications

Dr.K.P.Arulshri, Principal, KPR IET

Mechanics of Laminated Composites

Dr. V. Sivakumar, Professor Department of Aerospace Engineering, Amirta University, Coimbatore Campus, Email: - [email protected], Coimbatore.

(i) Thermoplastic composites (ii) Flammability behaviour of fabrics and composites

Dr. R Indu Shekar, Scientist & Additional Director, Defence Bio Engg. & Electro medical Laboratory, DEBEL, DRDO, ADE Campus, CV Raman Nagar, Bangalore 560 09.

22.

9/03/2012 & 10/03/2012

Automotive Engineering

IC Engines Mr. P.S.Gill Mentor and Research Analyst, Paramek Technologies, New Delhi

125 62 187 Mr.James Deepak D Mr.G.Krishnamoorthi

23.

7/10/2011 & 8/10/2011

Recent Trends in Composite Materials and its Processing

1. Nano materials 2. Processing of metal matrix composites 3. Casting of MMC’s

Dr.T.P.D. RAJAN Scientist E-11 Light Metals Alloys and Composites, National Institute for Interdisciplinary Science and Technology, Council of Scientific & Industrial Research, India, Thiruvananthapuram.

04 86 90 Dr. P.Sasikumar Dr.S.Sivasankaran

1. Processing of ceramic matrix composites 2. Characterization and mechanical properties of CMC’s

Dr. A. UDAYAKUMAR Scientist E-11 Materials Science Division, National Aerospace Laboratories, Post Bag NO: 1779, Airport Road, Bangalore. 560017 [email protected] [email protected]

Nanoidentification

Dr. RAMYA HARIHARAN Expert Consultant National Aerospace Laboratories, Post Bag NO: 1779, Airport Road, Bangalore. 560017

1. Polymer nanocompositer and its processing

Dr. M. RAMACHANDRA BHAT Principal Research Scientist Dr. M. RAMACHANDRA

methods 2. Fracture behavior of CFRP’s 3. NDT methods for FRP’s

BHAT Principal Research Scientist Department of Aerospace Engg., Indian Institute of Science, Bangalore

Formability of nanocomposite prepared by mechanical alloying

Dr.R.NARAYANASAMY Professor Department of Production Engg. National Institute of Technology, Tiruchirappalli

1. Processing and characterization of ultra-high temperature structural ceramic composites 2. Mechanical behavior of ceramic matrix composites

Dr. N.V. RAVI KUMAR Assistant Professor Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras

1. Processing and mechanical properties of CNT’s 2. Tribological behavior of CNT’s reinforced Aluminum matrix composites

Dr. SRINIVASA RAO BAKSHI Assistant Professor Department of Metallurgical and Materials Engineering Indian Institute of Technology Madras.

1. Deformation behavior of in-situ and ex-situ MMC’s 2. Mechanical alloying of nano composites

Dr K.SIVAPRASAD Assistant Professor Department of Metallurgical and Materials Engineering National Institute of Technology, Tiruchirappalli

Infiltration of graphite powders in resin for the fabrication of composite laminates and its properties

Prof. N. Rajesh Mathivanan Professor Department of Mechanical Engg. P. E. S. Institute of Technology, Bangalore

Natural fiber composites in resin for the fabrication of composite laminates and its properties

Dr. M. Thiru Chitrambalam, Professor and Dean Tamilnadu College of Engineering, Coimbatore.

2.0 LIST OF FACULTY DEVELOPMENT PROGRAMMES CONDUCTED:

Sl. No. Date Name of the Programme




KPRIET Others Total

1. 30/06/2015

One Day

FDP on

"Solid

Works"

Advances in Solid

Works

Mr.Thirumurugan (Application

Engineer) and Mr.R.S.Mohanraj

(Asst. Manager Technical) SIM

Technologies Pvt. Ltd, New

Siddhapudur, Coimbatore.

[email protected]

16 - 16 Mrs.S.Maivizhi selvi

[email protected]

9944990174

8754572185

2. 27/06/2014

Research proposals to funding Agencies

How to write research proposals

1.Dr.Vickram Jayaram Chairman & Professor, Department of Materials Science, IISc, Bangalore 2. Dr.K.Natarajan, Emeritus Professor, Department of Chemistry, Bharathiar University, Coimbatore

81 -- 81 Dr.S.Sivasankaran Dr.R.SaravanaKumar

3. 03/06/2014 Teaching and Research

Teaching and Research

Dr.R.S.Parmar, Emeritus Professor, Indian Institute of Technology, Delhi

56 -- 56 Dr.S.Sivasankaran

4. 09/07/2012 to 13/07/2012

Engineering Drawing

Geometric construction Mr.M.Sivakumar

06 06 12 Dr. P.Sasikumar Dr.S.Sivasankaran Mr.James Deepak D

Cycloids

Tutorials Mr.A.Saravana kumar Mr.L.Rajesh Kumar

Projection of points

Dr. P.Sasikumar

Projection of lines Dr. P.Sasikumar

Projection of planes

Dr.S.Sivasankaran Mr. G.Krishnamoorthi

Tutorials Mr.T.Prakash Mr.L.Rajesh Kumar

Projection of solids

Dr.S.Sivasankaran Mr. G.Krishnamoorthi

Section of solids Dr.S.Sivasankaran Mr. G.Krishnamoorthi

Tutorials Mr.T.Prakash Mr.L.Rajesh Kumar

Development of surfaces

Dr.S.Sivasankaran Mr. D.James Deepak

Isometric projections

Mr.T.Prakash Dr.R.Saravana kumar

Tutorials Mr.A.Saravanakumar Mr.L.Rajesh Kumar

Orthographic projections

Dr.M.Sivakumar

Perspective Projections

Dr.S.Sivasankaran Mr. D.James Deepak

Tutorials Mr.A.Saravanakumar Mr.L.Rajesh Kumar

5.

10/12/2012to 14/12/2012

Heat and Mass Transfer

1. Basics of convection 2.Forced convection 3.Free convection

Dr.Madhuganesh Visiting Professor, PSG College of Technology, Coimbatore

08 04 12 Dr.R.SaravanaKumar Mr.S.Sivalingam Mr. Rajesh Kana.S

1. Phase change heat transfer 2. Heat exchangers and LMTD 3. NTU method

Dr.M.Mohanraj, Professor Department of Mechanical Engineering, INFO Institute of Engineering

1. Radiation 2. Gas radiation

Dr.A.S.Krishnan Professor Department of Mechanical Engineering, Coimbatore Institute of Technology, Coimbatore

1. Introduction to conduction 2. Steady and unsteady state heat transfer

Dr.Rathana Kishore Professor Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore

Tutorial Dr.R.Saravana Kumar

3.0 LIST OF SYMPOSIUM & TECHNICAL PROGRAMMES ORGANIZED:

Sl. No.


Topics in the session No of participants Faculty Co-ordinator

KPRIET

Others Total

1. 04/10/2017 SAE Student convention tier-1 event

1. Paper presentation

2. Quiz contest

3. CAD Modeling

4.CAD Analysis

100 - 100 Mr.S.Sivalingam Mr.R.Vignesh

2. 24/3/2017 Yantrik’17

1. Paper presentation 2. Quiz contest

3. Project Presentation 102 102

Mr.R.Vivekananthan Mr.P.Suresh kumar

3. 29/1/2016 Enthusia’16

1.Best Machinist 2.Best Molder 3.Best Engine Assembler 4.Best Designer 5.Best Welder 6.PPT by experts from Audi, Coimbatore

- 348 348 Mr.R.M.Sivaraj Mr.P.Sathyamoorthy

4. 15/8/2015

Intra Department Events (Engineers Day Celebration)

1. Quiz Competition 2. Mini Bike Display 3. Design Contest

100 Nil 100 Mr.A.Avinash Mr.R.M.Sivaraj

5. 25/03/2015

National Level project Exhibition, HEPHAESTUS`15

1. Project presentation 2. RC racing 3. Technical Quiz

45 44 89 Mr.S.Sivalingam

6. 31/01/2015 &

6/02/2015

Intra department Paper presentation

Paper presentation 67 -- 67 Mr. N.Vignesh Kumar Mr. Arul Murugan.B

7. 15/09/2014 Project Exhibition on Engineering and Technology

Project Exhibition 84 -- 84 Mr.James Deepak D Mr. A.Saravana Kumar

8. 1/03/2014 Intra department technical paper

1. Paper presentation 46 -- 46 Mr. N.Vignesh Kumar Mr.James Deepak D

presentation and Quiz contest

2. Quiz contest

9. 18/09/2013 CSIR Sponsored National Level Technical Symposium “TEKNIKRIG”


2. Project exhibition

3. Modelling contest4.

120 37 157 Mr.James Deepak D Mr. A.Saravana Kumar

10. 14/12/2012 Manual drafting competition

1. Manual drafting

2. Quiz

100 -- 100 Mr.James Deepak D Mr. L.Rajesh Kumar

11. 15/09/2012 Project Exhibition on Engineering and Technology

Inter department project exhibition 586 -- 586 Mr.James Deepak D Mr. A.Saravana Kumar

12. 21/01/2012 Intra department technical paper presentation and Design contest


2. Modeling contest

55 -- 55 Mr.G.Krishnamoorthi Mr. A.Saravana Kumar

13. 29/01/2011 State Level Technical Symposium ‘TEKNIKRIG’

Design Contest 19 -- 19 Mr. A.Saravana Kumar

4.0 LIST OF ENTREPRENEURSHIP DEVELOPMENT PROGRAMMES ORGANIZED:

Sl. No.





KPRIET Others Total

1. DST sponsored three days “Entrepreneurship Awareness Camp”

Mr R. Vivekanandan

2. 15/2/2017 to 17/2/2017

DST sponsored three days “Entrepreneurship Awareness Camp”

i) Entrepreneurship

Awareness

Lectures &

activities

Er.C.K.Arivazhagan,

Soft Skill Trainer, SME

Enterprises,

Coimbatore.

78 - 78 Mr.S.P.Sathyaprasanth Mr R. Vivekanandan

ii) factory visit 9842685547

Dr. Senthil kumar CEO You Turn Aspire Coimbatore. Pon. Rathinavel Ex-Chairman rotract downtown Coimbatore

3. 11/4/16 to 13/4/16

AICTE & DST sponsored three days “Entrepreneurship Awareness Camp”

i) Entrepreneurship

Awareness

Lectures

ii)Entrepreneurship

Awareness

activities

iii)Sharing the

experience of first

generation

Entrepreneurs

Er.C.K.Arivazhagan,


Enterprises,

Coimbatore.

9842685547

35 - 35 Dr.P.Sasikumar Mr.S.P.Sathyaprasanth

Ms.P.Ramya, Founder,

Ara education,

Coimbatore,

9944069122,

araeducationcoimbatore

@gmail.com

N.Ramakrishnan,

9095576622,

[email protected]

4. 16/3/2016 to 18/3/2016


i) Entrepreneurship

Awareness

Lectures

ii)Entrepreneurship

Awareness

B.Kayalvizhi , MSME

DI Assistant Director

(Food).

[email protected]

m, mob no: 9486114285

100 - 100 Dr.P.Sasikumar Mr.S.P.Sathyaprasanth

activities

iii)Sharing the

experience of first

generation

Entrepreneurs

Er.C.K.Arivazhagan,


Enterprises,

Coimbatore.

9842685547

Mr.Nadhakumar

Krishnaswamy, & NRR.

Vijayakumar, Founder,

Passion& Angel

Investor, Coimbatore,

9952752696,

nandu@founderpassion.

com

Ms.P.Ramya, Founder,

Ara education,

Coimbatore,

9944069122,

araeducationcoimbatore

@gmail.com

5. 18/9/2015 AICTE & DST sponsored Guest Lecture on "Entrepreneurial Engineers"

"How to become a successful Entrepreneur"

Mr.Navaneeth Mylsamy, M.M.Gears Private Limited, Coimbatore. 9943017774, [email protected]

130 - - Mr.Sathyamoorthy Mr.M.Sathish

6.

26/06/2015

AICTE & DST

sponsored One Day

FDP clubbed with

an Investor

Awareness

Program

Soft Skills focussed

on behavioural

changes &

Inculcate the habit

of saving and

investments

Er.C.K.Arivazhagan,


Enterprises,

Coimbatore.

[email protected],

9842685547

68 Nil 68 B.Arulmurugan & S.P.Sathyaprasanth

7. 28/03/2015 to

31/03/2015


Team Building for entrepreneurs

Dr.R.Jagajeevan, Associate Professor, PSG Institute of management, Coimbatore

75 -- 75 Dr.P.Sasi Kumar

Mr.S.P.Sathya Prasanth

Mr.Arul Murugan.B

Entrepreneurship opportunities in Medical Textile

Mr.S.Thirupathi, Textile Engineer & Scientist, SITRA, Cbe

1. Behavioral changes to be a successful entrepreneur 2. Success stories of entrepreneurs

Er.C.K.Arivalazhgan Training Manager, SMEs, Coimbatore

8. 21/02/2015 One day workshop on Medical Textile

Medical Textile Mr.S.Thirupathi, Textile Engineer & Scientist, SITRA, Cbe

30 -- 30 Mr.S.P.Sathya Prasath

9. 11/08/2014 Inauguration of “Young Entrepreneurial Club”

“Opportunities For Young Entrepreneurs And Importance Of Entrepreneurship Development For Our Nation”

Mr. Vishwanathan Sahasranamam General Manager, Coimbatore Innovation & Business Incubator (CIBI), Management Consultant, Startup Coach, Innovation Strategist,


Coimbatore.

10. 13/09/2014 One day workshop on team building and brain storming techniques for an entrepreneur

Team Building

Dr.R.Jagajeevan, Associate Professor, PSG Institute of management, Coimbatore


11. 04/09/2014 to

06/09/2014


Preparation Of A Good Project Proposals And Approaching A Bank For Loan To Become A Successful Entrepreneur

Mr.J.Vanangamudi Lead District Bank Manager, CANARA Bank.


Roll Of Tamilnadu Industrial Investment Corporation (TIIC) For The New Entrepreneurs And Its Various Schemes Various Subsidies/Incentives To Industries

Mr.P.Gunasekaran Branch Manager, TIIC, Coimbatore

Be Your Own Boss And (Ii) Smart SME Products For Smart Businesses

Mr.S.V.Narayan Retired General Manager, State Bank of India, Coimbatore.

Steps To Start A Small Scale Industry , (Ii) Characteristic & Qualities Of Entrepreneur

Mr.V.Saravanan Krishnan Branch Manager, National Small Industries Corporation (NSIC), Coimbatore

Creativity And Idea Generation

Mr.P.Jeganathan Chief Executive Officer, Energetic Byz Plus, Coimbatore.

Man Behind The Venture - Soft Skills For Entrepreneurs

Er.C.K.Arivalazhgan Training Manager, SMEs, Coimbatore

12.

20.02.2014 & 21.02.2014

AICTE Sponsored Two Day Event on “SOFT SKILL ENRICHMENT PROGRAMME”

SOFT SKILL ENRICHMENT PROGRAMME

Er.C.K.Arivalazhgan, Training Manager SMEs, Coimbatore


13.

21-01-2014 to

23-01-2014

AICTE sponsored three days programme on “Web design”

HTML & CSS Mr.N.Prasath, AP(CSE), KPRIET


Javascript Mr. P.N.Senthil Prakash, AP(CSE), KPRIET

PHP Mr.T.Rajasekaran AP(CSE), KPRIET

14. 06/01/2014 to

08/01/2014


Importance of entrepreneurship and opportunities for entrepreneurs

Mr N Subramaniam, Managing Director Habasit Iakoka Private Limited, Coimbatore


Preparation of a good project proposals and approaching a bank.

Mr.J.Vanangamudi, Lead District Bank Manager CANARA Bank, R.S.Puram, Coimbatore

Role of TIIC for the new entrepreneurs and its various schemes, various subsidies/

Mr.P.Gunasekaran, Branch Manager Tamilnadu Industrial Investment Corporation (TIIC), Kurichi Branch, Coimbatore

incentives to industries

Importance of entrepreneurship for our nation

Mr. M. Kandaswami, Managing Director M/S Anandha Fabrication Pvt. Ltd, Coimbatore

Be your own boss, SME products for smart business

Mr.S.V.Narayan, Retired General Manager State Bank of India, Coimbatore

Steps to start a small scale industry, characteristic and qualities of an entrepreneur

Mr.V.Saravanan Krishnan, Branch Manager National Small Industries Corporation (NSIC), Coimbatore

How to become a successful entrepreneur

Mr.S.Prabakaran, Managing Director SPIN AQM Technologies India (P) Lt.d.

Young entrepreneurial role for our nation

Mr. Anmol Vij, Director Keyslab Software India Private Limited, Coimbatore

Man behind the venture-Soft skills for entrepreneurs

Er.C.K.Arivalazhgan, Training Manager SMEs, Coimbatore

15. 20/12/2013 &

21/12/2013

AICTE Sponsored Two Days Intensive Hands-on Training Programme on “PHOTOSHOP”

Photoshop Mr.M.Raja, Multi

Media Professional,

KVT Professional

Educational, Madurai


16. 10/10/2013 Entrepreneurship development skills

How to become Successful & Ethical Entrepreneur and their roles for our Nation

Mr.A.Muruganantham, Managing Director and Founder, Jayaashri Industries, Coimbatore


Paper presentation topics 1. Role of an entrepreneur in economic development of a country 2. Motivating factors required for the growth of a business enterprise. Debate Good idea and bad idea of business

17. 19/09/2013 to

21/09/2013

DST & AICTE sponsored three days “Entrepreneurship Awareness Camp”

Camp objectives, Importance of entrepreneurship –An overview

Mr.D.Jayagopal, Chairman EDP Cell – CODISSIA, Coimbatore


Preparation of a good Project Proposals and approaching a Bank for loan to become a successful Entrepreneur

Mr.J.Vanangamudi, Lead District Bank Manager, CANARA Bank, Coimbatore

Financial aspects of small scale industry (SSI) unit including salient features of a project report

Mr.P.Gunasekaran, Branch Manager, Tamilnadu Industrial Investment Corporation (TIIC), Kurichi, Branch, Coimbatore

Importance of Entrepreneurship Development for our Nation

Mr. Vignesh Damodharaswamy, Managing Director, Ellen Group of Industries (P) Ltd, Coimbatore

Opportunities for Entrepreneurs and Banking schemes available for Entrepreneurs

Mr.S.V.Narayan, Retired General Manager, State Bank of India, Coimbatore

(i) Steps to start a small scale industry (ii) Characteristic & Qualities of Entrepreneur

Mr.V.Saravana Krishnan, Business Development Manager, National Small Industries Corporation (NSIC), Coimbatore

Historical values and Indian Values on entrepreneurship

Dr.R.Chandrasekar Menon, Professor, AEGIS Global Academy, Coimbatore

“Man behind the venture” - Soft skills for entrepreneurs

Er.C.K.Arivalazhgan Training Manager, Small Medium Enterprise (SMEs), Coimbatore

18. 04/03/2013 to

06/03/2013

DST sponsored three days “Entrepreneurship Awareness Camp”

1. Why entrepreneurship in general 2. Historical values and Indian values on entrepreneurship

Dr.R.Chandrasekar Menon Professor, AEGIS Global Academy, Coimbatore


1. How to start a SSI 2. Technical and commercial aspects of SSI

Er.K.S.Naaganathan Project Consultant, SMEs, Coimbatore

1. Identification of business opportunities and

Mr.S.Krishna CEO, Aravinda Sai Business Ventures

mechanisms for selection of a product 2. Technology assistance from R&D labs and other institutions of choice of technology 1. Man behind the venture for soft skills for entrepreneurs 2. Positive psychology for entrepreneurs

Er.C.K.Arivalazhgan Training Manger, SMEs, Coimbatore

1. Financial aspects of SSI and project preparation 2. Schemes and assistance available by government agencies

Er.P.Rangasamy Asst.Director, DIC, Coimbatore

5.0 LIST OF SEMINAR ORGANIZED

Sl. No.


Topics in the session Name of the speaker with contact details


KPRIET

Others Total

1. 23/9/2015 International seminar on Career guidance and development

Career guidance and development

Ram Ramachandran, Quality Engineering specialist (Rtd.), Department of Energy, US. 900378486,

35 nil 35 Mr.A.Avinash

[email protected]

2. 19/03/2015 &

20/03/2015

Two days National level seminar on Finite Element Analysis

Role of CAE and Simulation in NPD

Mr. A. Gomathinayagam, Manager-Design & Analysis, L&T, Coimbatore

33 63 96 Mr. L.Prabhu

Application of FEM to Medical Applications

Dr.S.Shankar, Associate Professor, Kongu Engineering College, Perundurai

Application of FEM to Vibration problems

Dr. M.Ramu, Assistant Professor, PSG College of Technology, Coimbatore

Calculus of variation and variational formulation in FEM

Dr. K. Prabhakaran Nair, Professor, NIT, Calicut

Application of FEM in Bio Mechanics

Dr. N. Siva Shanmugam, Assistant Professor, Mechanical Engineering, NIT Trichy

Application of FEM to Structural Problems

Dr. P.R. Thyla, Associate Professor, PSG College of Technology, Coimbatore

3. 23/08/2013 & 24/08/2013

CSIR Sponsored National Seminar on “Mechanics, Processing and Characterization of high performance hybrid composite

(i) Introduction and applications of hybrid composites (ii) Hybrid Composite Shell Modeling for Morphing Application

Dr. Dinesh Kumar Harursampath, Professor, IISc, Bangalore

45 55 90 Dr. P.Sasikumar

Dr.S.Sivasankaran

(i) Processing of Hybrid Laminate Composites (ii) Drilling of Hybrid Laminate Composites

Dr. V. Krishnaraj, Associate Professor, Department of Mechanical Engineering,PSG College of Technology,

materials” Coimbatore, Email: [email protected] Phone: 0422 4344750, Mobile No: 9788454142

(i) Mechanics-Lamina constitutive Law, orthotropic & isotropic lamina, stiffness matrix, rule of mixtures (ii) Micro and macro mechanics of laminates and hybrid laminates

Dr. V.Sivakumar, Associate Professor Department of Aerospace Engineering, Amirta University, Coimbatore Campus, Email: [email protected]

(i) Fracture behavior of woven fabric hybrid composite laminates (ii) Defects and Non-destructive techniques for hybrid composites

Dr. M. Ramachandra Bhat, Chief Research Scientist Department of Aerospace Engineering, Indian Institute of Science, Bangalore. Phone: 22933025/22932420 Fax:-23600134, Email:[email protected]

4. 1/02/2013 & 2/02/2013

CSIR sponsored national seminar on “Advanced modeling techniques for heat transfer equipment and its applications

Advanced modeling and simulation techniques on vapor absorption refrigeration system models

Dr.A.Mani, Professor & head Department of R & AC, IIT Madras

24 20 44 Mr. S. Sivalingam

Enhancing heat transfer in thermal equipment and its related modeling techniques

Dr.S.Suresh, Associate Professor Department of Mechanical Engineering, National Institute of Technology,

Tiruchirappalli.

Boiler design using CFD techniques

Dr.R.Elangovan Manager/Boiler, BHEL, Tiruchirappalli

Mathematical modeling of heat transfer problems along with the use of CFD techniques in challenging heat transfer problems

Dr.Rathana Kishore Professor Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore

5. 5/10/2012 & 6/10/2012

CSIR sponsored two days national level seminar on “Processing and Mechanical Behavior of Structural Nano materials”

1. Various synthesis routes for nanostructured materials 2. Grain size and mechanical properties of nanostructured materials

Dr.T.P.D. Rajan, Scientist E-11, NIIST, CSIR, Thiruvanthapuram

20 40 60 Dr.P.Sasikumar

Dr.S.Sivasankaran

1. Fabrication of ultra-fine grained and NC materials through severe plastic deformation techniques 2. Elevated temperature deformation behavior of nano structured materials

Dr. V. Subramaniay Sarma, Associate Professor, IIT Madras

Creep behavior of microcrystalline and nano crystalline

Dr. Ashok Kumar Mondal, Assisstant Professor, NIT Rourkela

materials

Mechanical behavior of nano structural materials

Dr. A. Thirugnanam, Assistant Professor, NIT Rourkela

1. Characterization of structural nano materials 2. Structural and mechanical behavior of Nano composites

Dr. K.R.Ravi, Assistant Professor, PSG Institute of Advanced studies Coimbatore

Fabrication and tribological behavior of nano structured materials by FSP

Dr.N.Murugan, Professor, CIT Coimbatore

Synthesis, characterization and mechanical behavior of mechanically alloyed dispersion strengthened ferritic steel

Dr. R. Subramanian, Associate Professor, PSG Tech, Coimbatore

6.0 LIST OF CONFERENCE ORGANIZED: Sl. No.





KPRIET

Others Total

1. 04/03/2016

& 05/03/2016

International Conference on “Technological

Advancements in Materials and

Manufacturing for Industrial

Modeling & Simulation of manufacturing process

Dr.S.Saikumar, Scientist G, DRDL, Hydrabad

25 175 200 Dr.K.E.K.Vimal

Dr.M.Manikandan Latest Trends in Nuclear Technology

Dr.S.Krishna kumar, Scientist G, DRDO, Chennai

Environment – TAMMIE 2016” Material

Characterization & Synthesis

Dr.Kim Ill Soo, Mokpo

National University,

South Korea

Latest Trends in Aviation Technology

Mr.M.Ganapathi, GM, Tech Mahindra, Bangalore.

2. 27/03/2015

National Conference on “Technological Advancements in

Materials and Manufacturing for

Industrial Environment –

TAMMIE 2015”

Laser surface engineering for

industrial solutions

Dr. M.Durai Selvam, Associate Professor and

Head, Department of

production engineering, National Institute of

Technology, Tiruchirappalli

78 -- 78

Dr. P.Sasikumar Mr. L.Rajesh Kumar

Mr.S.Sivalingam

3. 14/02/2013 CSIR sponsored Second National Conference on “Technological Advancements in Materials and Manufacturing for Industrial Environment – TAMMIE 2013”

Recent advancement in materials and manufacturing

Dr.M.Elangovan, Professor Department of Mechanical Engineering, Amrita School of Engineering, Coimbatore

12 42 54 Dr. P.Sasikumar Mr. L.Rajesh Kumar

4. 16/03/2012 Technological Advancements in Materials, Manufacturing and Industrial Engineering– TAMMIE 2012

Chief guest and keynote speaker for National Conference

Dr.K.RAMESHKUMAR Professor & Chairman, Department of Mechanical Engineering, Amrita University, Coimbatore

20 24 44 Dr. P.Sasikumar Mr. L.Rajesh Kumar

7.0 LIST OF GUEST LECTURES ARRANGED

Sl. No.





KPRIET Others Total

1. 28/02/2018 Guest Lecture

Product Development cycle

in Automobile Technology

Mr.S.Vivekanandan, Operations & Business

Development, Tiger Jump (Vehicle Tracking & Fleet

Mangement), Erode

200 - 200 Mr.Manoj kumar


Present Industrial Expectations

Mr. C.Ravi Raja Singh Deputy General Manager, Tools room division, Priol

Ltd, Coimbatore. [email protected]

+91 98947 99628

202 - 202 Mr.Sriram


Recent advancements in

CAD

Mr.K.R.Santhosh kumar, Senior Engineer, CADD

Center, Chennai, 9578087972,

[email protected]

202 - 202 Mr.B.Arulmurugan


Expectation of Industry from

Fresh Engineer

Mr.J.Jagadeesh & Mr.N.Sampath kumar, HR Manager, Roots Industries, Coimbatore, 9597776673,

[email protected], 9994343303,

[email protected]

202 - 202 Mr.R.Anand kumar

5. 12/08/2017 Association Inauguration

& Guest Lecture

Knowledge acquiring from books & myths

Mr.Saravanan.K, Country Manager, STM SpA, Italy

502 - 502 Mr.D.Balaji


Career Advancement

Studies

Mr. RajKumar, Co-Founder of ARA overseas

education, Coimbatore

124 - 124 Mr.Vivekanandhan


Career Competency And Internship

Awareness

Mr.VIBIN CHANDAR,

Head of ICT, Blue crest university college,

Ghanna

124 - 124 Dr.T.Laxmanan


Latest Trends & Job opportunities in

CAE

1) Mr.S.Kandasamy, Senior Design Engineer & Project

Manager 2) M.Sathyamoorthy, Senior

Design Engineer 3) Mr.K.Karthik, Manager,

VES Academy Private Limited, Coimbatore, 0422-

4210222

124 - 124 Mr.R.M.Sivaraj


“IELTS Exam Overview And How

To Score Better”

1) Mr.Anil Peruka Regional Manager, IELTS Operations & Business Development (South India) IDP Education Pvt Ltd 2. Mr. Dinesh kumar.M Business Development IDP Education India Pvt. Ltd. 1055/7,First Floor,Gowtham Centre,Avinashi Road Coimbatore – 641018, Tamilnadu


10. 01/10/2016 Guest Lecture & ISHARE

Vapour Absorption Refrigeration

Systems

Mr.C.P.Jawahar, Students Chairman, Coimbatore Sub

Chapter,

90 - 90 Mr.N.Vignesh kumar & Mr.G.B.Amarnath

Chapter Re installation

[email protected], 7708733266


“Product Design & Development”

Mr.S.Velmurugan, AGM, Defence Vehicles, Ashok

Leyland, Chennai, 9940029132.

[email protected]

340 - 340 Mr.P.Suresh kumar


Lean – Six Sigma Mr. Jamal Musthafa , Director at Mastro Lee

Engineering and Management Consultants,

Coimbatore

131 - 131 Mr.S.Deepan


Challenges in New Product

Development

Dr.M.Natarajan, Professor & Consultant, Adithya Institute

of Technology & Franco Technology, Coimbatore,


130 - 130 Mr.P.Suresh kumar & Mr.P.Udhyakumar


Design & Testing of Space craft Structures

Mr.P.Sathishkumar, Scientist 'E', Structures Division,

ISRO, Bangalore, 09972653988

[email protected]



Recent Trends in Automobiles

Mr. H.Ramsubramaniam Senior General Manager Advanced Engineering

Engineering Research & Development

Brakes India Limited Padi, Chennai – 600 050

E-Mail: Ramsubramaniam.H@brakes

india.co.in Mobile: 9841265493

446 - 446 Dr.S.Ramesh Babu

16. 9/7/2016 Guest Lecture &

Association inaguaration

Composite Materials Dr. A. Udayakumar Principal Scientist (Scientist

E-11) Materials Science Division, CSIR – National Aerospace

Laboratories, Bangalore. 560017

E-mail: [email protected] Mobile: 09449836811




Laser Technology Dr. M. Duraiselvam Associate Professor & Head Department of Production Engineering, National Institute of Technology, Tiruchirappalli – 620 015 E-Mail: [email protected] Mobile: 9994373486




Welding Stress & Distortion Analysis

Dr.N.Raju, DGM, WRI, BHEL,Trichy. [email protected] 9994722100



Demo

3D Printing Technology

Mr.D.Mahesh, V Engineering Solutions, Coimbatore,

9942806054 [email protected]



Role of Mechanical Engineering in

Planning & Execution in

Industry

Mr.S.Sankar Subramanian, Head - Plant Engineer, Roots

India Industries Pvt. Ltd., Coimbatore

156 - 156 Mr.S.Ambalarajan


Lean Manufacturing Mr. S R SHANKAR, Senior Lean Consultant in RG

Management consultants, Coimbatore

131 - 131 Mr.S.Deepan

22. 12/2/2016 Guest "Career Mr.V.Pradeep kumar, 35 - 35 Mr.N.Vigneh kumar

Lecture Opportunities in HVAC Design"

Managing Director, Velsons Engineers Pvt. Ltd.

Coimbatore, 9842513149, [email protected]


Pre-Placement

Talk

Career Development in CAD

Mr. Sathyanarayanan, HR, USAM Technologies, Coimbatore.-641012.

Ph:0422-2524343 / 2521027 E-mail : [email protected]



Opportunities for Mechanical Engineer

in Core Industries

Mr.Natarajan Perumal, HR, Mold Master, Coimbatore,

9787076125



Opportunities for Mechanical Engineer

in Core Industries

Mr. Jinu Thomas, General Manager & HR, Ceasefire, Coimbatore. 9048001460



SAE Student Chapter

inaguaration

Role and functions of SAE

Dr.A.Ramesh,Managing committee member,SAE-

india southern section. [email protected],

9363140941

69 - 69 Mr.S.Sivalingam


"Role of Mechanical Engineers"

Mrs.Anuradha, Manager- Mechanical, Kavin

Engineering & Services Pvt. Ltd. Coimbatore.


135 - 135 Mr.Sathish kumar Mr.V.Sathyamoorthy


"Personality Development"

Mr.Satis Babu Madhavan, General Manager, Business

Development, Kavin Engineering & Services Pvt.

Ltd. Coimbatore. [email protected],

9994389494

135 - 135 Mr.Sathish kumar Mr.V.Sathyamoorthy


Heating, Ventilation& Air

conditioning

Mr.M.Raakesh(2011– 2015 Batch Alumni)

Project Engineer,

100 - - Dr.M.Manikandan Mr.B.Arulmurugan

Siemens Ltd., Building Technologies,

SSP – Projects, Bangalore – 560 068 Mobile: 8807810108

E-mail: [email protected]


Recent Trends in Automobiles

Mr. H.Ramsubramaniam Senior General Manager Advanced Engineering

Engineering Research & Development

Brakes India Limited Padi, Chennai – 600 050

E-Mail: Ramsubramaniam.H@brakes

india.co.in Mobile: 9841265493

100 - - Dr.M.Manikandan


Composite Materials Dr. A. Udayakumar Principal Scientist (Scientist

E-11) Materials Science Division, CSIR – National Aerospace

Laboratories, Bangalore. 560017

E-mail: [email protected] Mobile: 09449836811



Laser Technology Dr. M. Duraiselvam Associate Professor & Head Department of Production Engineering, National Institute of Technology, Tiruchirappalli – 620 015 E-Mail: [email protected] Mobile: 9994373486


33. 14/8/2015 Reinstallation of ISHARE Students Chapter

Solar Cooling Technology

Mr.Sekar Ram, President, ISHARE Coimbatore Sub Chapter, [email protected], 9894396544

90 - 90 Mr.N.Vignesh kumar & Mr.G.B.Amarnath

Mr.C.P.Jawahar, Students Chairman, Coimbatore Sub Chapter, [email protected], 7708733266


Higher studies at Singapore

Roshan.K.J.M, Marketing Manager, Curtin university, Singapore. [email protected] 9871982562 +91-11 65029833



Corporate mentoring for Career Development

Mr.P.Vijayakumar, Senior VP, Bull Machines Private Limited,Coimbatore. 7373788770, svpexports @bullmachine.com

266 - 266 R.Anandkumar & M.Vignesh


"Innovation as it being"

Mr.G.D.Rajkumar, Director, Gedee Weiler Private Limited, Coimbatore. [email protected]

472 - 472 Mr.R.M.Sivaraj & Mr. Sureshkumar

37. 15/7/2015

Guest Lecture

Opportunities in Indian Armed Forces

Lt.Esan & Prof.Anto (The Training & Placement centre, Cbe)


38. 13/7/2015

Guest Lecture

Guest lecture on "Placement and training activities"

Mr.Selvakumar Vardharajan (Head Placement & Mentoring) DJ Academy, Coimbatore. 98435-48428 Mail:[email protected]

130 - 130 R.Anandkumar & Vishal Jaiswal


Opportunities in Civil services

Mr.A.Gunasekaran KPR IAS Academy Cbe

413 -- 413 Mrs. V.Bhuvaneshwari


Overseas higher education

Mr.M. Dineshkumar Technical Head EDWISE Education

136 -- 136 Mr.James Deepak D


Career development in Armed Force

Lt.Esan & Prof.Anto (The Training & Placement centre, Cbe)

136 -- 136 Mr.R.M.Sivaraj


What industry expects from fresh engineers”

Mr. Navaneeth, Vishnu gears

140 -- 140 Mr. S. Pradeep


Job opportunities in “CATIA”

EDS Technologies 140 -- 140 Mr. S. Pradeep


Job opportunities in “Tool designing option”

NTTF Coimbatore 140 -- 140 Mr. S. Pradeep


New vehicle/product development

Mr. Arun Palanikumar, HR Manager-Bharat Benz

140 -- 140 Mr.James Deepak D Mr. S. Pradeep


Fluid mechanics Mr. G.Krishnamoorthi Research Scholar, IIT-M

139 -- 139 Mr.James Deepak D Mrs.S.Maivizhiselvi


Stress analysis Dr. S. Cholai Murugan, HOD/MECH, Fathima College of Engineering



New product design and development

Mr. Charath Chander Director, Cybermax Project Solutions



Importance of GATE

Mr. Arunmozhi. G Assistant Manager – Student Relations, The Gate Academy

413 -- 413 Mr.James Deepak D Mr. A.Saravana Kumar


Engine kinematics and dynamics

Mr.R.Balraj, Director-Technical, Arris CADD,Coimbatore

413 -- 413 Mr.James Deepak D Mr. A.Saravana Kumar

51. 14/08/2014 Guest Organization needs Mr. Laxmesh BH 413 -- 413 Mr.James Deepak D

Lecture value growing engineers

Head - Precision Manufacturing Facility, L&T Heavy machines division, Coimbatore

Mr. A.Saravana Kumar


Applied hydraulics and pneumatics

Mr. R. Saravanna Kumar Assistant Manager, Prolific systems



Simulation in solid works

1. S.Gokul Rangarajan, Simulation-Application lead, 2. Gokul.R Basic design engineer, SIMTEK technologies, Coimbatore


54. 25/07/2014 Guest Lecture & ISHRAE Inaguration

HVAC &BMS introduction program

Mr.Sekar Ramasubramaniam, Chief Executive, Sigma Solutions, Coimbatore

140 -- 140 Mr. S. Pradeep


Current research on metal joining process

Dr.N.Murugan, Professor, CIT Coimbatore



Vehicle dynamics and vehicle design for SAE and Supra

Mr.R.Balraj, Director-Technical, Arris CADD,Coimbatore



Challenges and Opportunities towards mechanical vibrations

Dr.M.Senthilkumar, Associate Professor, PSG College of Technology, Coimbatore



Industrial Automation

Mr. Sangram Deshmukh Director, Educate To Automate, Pune



Material processing, modern materials and treatment

Dr.C.SathiyaNarayanan, Associate Professor, Department of Production Engineering, National Institute of Technology, Tiruchirappalli

140 -- 140 Mrs. V.Bhuvaneshwari


Freshers requirements in valve industry

Mr.Badri Narayanan, Executive – HR, Velan valves India (P) Ltd., Coimbatore

72 -- 72 Mr.S.Pradeep Mr. R.Anand Kumar


Bridging the gap Mr.Ganesan, Manager, HR & Admin, L&T Valves,Coimbatore

62.18/09/2013

Guest Lecture

Role of a Mechanical Engineer

Mr. Milandeep Singh, Senior Design Manager, Robert Bosch



How to prepare GATE Exam

Mr.A.Saravanakumar, Director, GATEFORUM



Current industry trend in Tool design

Mr.Meenakshi Sundaram, Assistant Testing Engineer, Y NOT Engineers, Coimbatore

72 -- 72 Mr.G.Krishnamoorthi


Current research on metal joining process

Dr.N.Murugan, Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology



Challenges of Mechanical Engineers in Indian Industries

Mr.P.Mahendran, Manager – Operations & Materials, PRICOL, Coimbatore



Opportunities and Challenges towards Mechanical Vibrations

Dr.M.Senthilkumar, Associate Professor, PSG College of Technology, Coimbatore



Non-destructive testing

Mr.Sangeeth, CEO, Decibel Nde Inspection and Training Institute

72 -- 72 Mr.G.Krishnamoorthi


HVAC and IBMS Mr.Sekar Ramasubramaniam, Chief Executive, Sigma Solutions, Coimbatore

72 -- 72 Mr.N.Vignesh Kumar


Non-destructive testing

Mr.R.Baskar, Managing Director, BIT

72 -- 72 Dr.P.Sasikumar

Inspection Technology, Chennai


Hydraulics and Pneumatics

Dr.M.AmirthagadeeswaranProfessor & Head, Department of Mechanical Engineering, Government College of Technology, Coimbatore

72 -- 72 Mr.R.Saravana Kumar


Hybrid Electric vehicles

Dr.T.Periyasamy, Manager, R&D (Engines), Mahindra Industries, Chennai

72 -- 72 Mr. M.Sivakumar


Recent trends in Industrial Automation

M/S.Axis Global Automation 72 -- 72 Mr.C.Maxwell Rejil


Current research on Metal Joining Process

Dr.N.Murugan, Professor, Department of Mechanical Engineering, Coimbatore Institute of Technology



Gears and Drives Mr.K.Saravanan, Country Manager, Rossi Gears and Motors

278 -- 278 Mr. R.Anand Kumar


Opportunities and Challenges towards Finite Element Analysis for Mechanical Engineers

Dr.P.R.Thyla, Associate Professor, PSG College of Technology, Coimbatore

72 -- 72 Mr.L.Prabhu


Research problems and investigation of machining behavior of composite materials

Dr.V.Krishnaraj, Assistant Professor (Senior Grade), PSG College of Technology, Coimbatore

65 -- 65 Mr.L.Prabhu


Opportunities and Challenges towards Mechanical Vibrations

Dr.M.Senthilkumar, Assistant Professor, PSG College of Technology, Coimbatore



Fiber reinforced plastics composites and its applications

Mr.P.Roosewelt, Reinforced Plastic Industries, Bangalore



Nuclear Power Dr.N.L.Parthasarathi, Scientific Officer D, IGCAR, Kalpakkam



CAD/CAM/CAE Mr.Nandakumar, Product Manager, CADD Centre



IC Engines Mr.C.Prakash, General Manager, Ashok Leyland



Need for GATE Mr. N.V.Subrahmanyan, Director of TIME Institute, Coimbatore

137 -- 137 Mr.James Deepak D Mr. G.Krishnamoorthi


Recent developments in CNC machine tools

Mr. Ganesh Parthasarathy, CEO & Director of TUSSOR Machine Tools India Pvt. Limited, Coimbatore

137 -- 137 Mr.James Deepak D Mr. G.Krishnamoorthi


Engineering materials and metallurgy

Dr.R.Subramanian, Associate Professor, Department of Metallurgical Engineering, PSG College of Technology, Coimbatore



Laser and its applications

Dr.M.Duraiselvam, Associate Professor, Department of Production Engineering, National Institute of Technology, Tiruchirappalli


8.0 International Seminar Organized

Sl. No.

Date Name of the

Programme


Name of the speaker with contact details No of participants Faculty Co-ordinator

KPRIET Others Total

1.03-08-2013

International

Seminar

International Interdisciplinary Research Seminar on “How to do Ph.D at International Standards”

1. Prof.C.Ramamoorthy, Director

(International Affairs), SGETS

2.Dr.S.Arunachalam, President, SGETS,

University of East London, UK.

49 Faculties & 8 PG students

nil 83 Dr.S.Sivasankaran

Dr.M.V.Sureshkumar

kpr institute of engineering and technology, · mahindra & mahindra ltd. chennai. 8754442297,...

Documents