l n h commitment to excellence o d - shaws of brighton · alpro’s flexible facilities enable...

Commitment to

Excellence

door handles

alpro

®

Commitment to

Excellence

Alpro Architectural Hardware located in Poole, Dorset is an independent company and part of IECLimited which is a family owned business founded in 1938 to supply quality mechanical components.

Alpro supplies a range of electro-mechanical access control products and a complete range of doorhard ware, including door handles, door closers, locks, flushbolts and cylinders specifically tailored tothe needs of the OEM marketplace.

Alpro’s UK based manufacturingAlpro provides high quality products and customerservice. To ensure this standard is achieved,significant investment has been made in themanufacturing facilities for Alpro handles. Thisenables Alpro to control material quality and cutlead times. Any defective materials are rejected onreceipt and the finished Alpro handles are inspectedimmediately prior to despatch to ensure they aredefect free.

Standard stainless steel handles are made fromgrade 304 stainless steel. Grade 316 stainless steelcan be used as an alternative if specified in theoriginal order.

To guarantee customer satisfaction, Alpro’s in-houseQuality Management System run seamlessly fromgoods inwards inspection, across the manufacturingprocesses and ends with a final check forappearance and accuracy. Alpro handles and theirfixing kits are then packed with care in robustcardboard containers for safe delivery.

Alpro’s flexible facilities enable one-off bespokedesigns to be produced in addition to the standardranges. Customer’s specialised needs are met usingAlpro’s in-house design capability. Changes can bemade to appearance, materials, or designspecification to meet changes in legislation or DDAcompliance. High quality enhanced manufacturingensures a speedy turn-round for special requirementsmeeting customer needs in full.

As an independent door hardware manufacturer andspe cialist Alpro provides a tailor made solution fromthe initial enquiry, through to final de livery. Reinforcedby its specialised internal sales and sup port structureand its competitive pricing, Alpro stays at theforefront of the industry and continues to offer FirstChoice solutions.

©

About Alpro Architectural Hardware

alpro

2 About Alpro www.alpro.co.uk 01202 676262

©

2

©

3

Quality

pull handles

Quality www.alpro.co.uk 01202 676262 3

Quality PolicyOur success is built on our ability to provide ourcustomers with quality products and standardsof service that meet or exceed theirexpectations.

We shall continue to be successful by:• Ensuring that quality is everybody’sresponsibility

• Maintaining an environment in whichteamwork and involvement results incontinuous improvements in the way we work

• Improving our skills by effective training anddevelopment

• Working on our Quality Management Systemwhich meets ISO 9001:2008

• Providing our customers with the rightproducts at the right time from our specialistsuppliers.

The Managing Director is ultimately responsiblefor the implementation of this policy with theassistance of our Quality Manager who controlsthe reviews, audits and works to ensure theunfailing maintenance of our quality standards.

Our policy is to provide an unrivalled serviceby getting it right first time and every timethereafter.

Environmental FactorsAlpro Hardware endeavors where ever possibleto use environmentally friendly materials in theconstruction of its products and customerservices. In line with its environmental policyAlpro handles are manufactured from bothaluminium and stainless steel, both of which are100% recyclable.

As the third most abundant element in theworld (Bauxite) aluminium is both sustainableand recyclable. This means that as well asaesthetic advantages, savings can be madethrough superior performance (longevity anddurability) of the material by reducingmaintenance costs. Added to this is the non-toxicity of the material making for a saferworking environment.

A recent report by EUROFER (January 1999)“Manufacturer Processing and Use ofStainless Steel: A Review of Health Effects”concluded that:

Stainless steel does not cause adverse effectson health and so does not need to beclassified as hazardous to health.

There is no data available to suggestmanufacture of stainless steel affects the healthof the workers.

The grinding and cutting of stainless steel donot appear to carry any adverse health effects

In addition stainless steel allows theminimization of waste, with

all discarded parts,collected, recycledand returned to thefurnace for re-use.

In addition to theabove economic and

environmental benefits,Alpro handles also conform to all relevantlegislation regarding the Disability andDiscrimination Act 2004.

If the finish yourequire is not shownplease contact us

Finishes• Satin Anodised (SAA)• Satin Stainless Steel (SSS)• Polished Stainless Steel (PSS)• Powder Coated (PC)• Nylon Coated (NC)Handles are available in both Rilsan nylon and powdercoating.

However since the costs of both nylon and powdercoating are virtually identical we strongly recommend theuse of Rilsan nylon. The nylon coat gives a superiordurability and conforms to the Disability andDiscrimination Act 2004 (Part 3 Provision of Ser vices) withregard to the improvement of thermal conductivity. Rilsannylon is applied to the base material of the handle(70/100 microns thick) and is available in five ex-stockcolours, as show in the colour chart below.

Additional colours are available with a 10 working dayturn-around and some colours also carry an addi tionalprice surcharge.

Additional finishes are available. If thefinish required is not shown, pleasecontact our sales office on01202 676262 for further help.

Ex Stock Colours

WhiteRAL9010

Ultra Marine BlueRAL5002

BlackRAL9005

Agate GreyRAL7038

White AluminiumRAL9006

This colour chart is for guidance only.We recommend you check your finalcolour choice

Finishes / RAL Colours www.alpro.co.uk 01202 676262

pull handlesFinishes / RAL Colours

4

Handle Range www.alpro.co.uk 01202 676262

pull handlesHandle Range

Impressionist Range

The Impressionist range of door handles are bold and modern in appearance, as well as beingpractical in everyday use. Manufactured in 32 and 38mm diameters, the look and feel is strong androbust, yet aesthetically pleasing to the eye. Available from stock in aluminium, stainless steel and anumerous range of powder and nylon coated colours; this range truly does make “an impression”.

01 Series Straight pull handles 02 Series Offset cranked pull handles

03 Series Circular pull handle 05 Series Spigot mounted circular pull handle

Impressionist handles are designed for aluminium, timber and glass door applications.

Functional Range

97 SeriesThe 97 series of pull handles are manufactured in 41mm diameter. They come in a range of sizesfrom 305mm to 3000mm.All sizes are available in either straight or offset versions and are suitable for bolt-thro (single side fixing)or back to back fixing.Note: Handles over 2400mm long required a centre fixing bracket.

98 SeriesThe 98 series of pull handles are manufactured in 32 and 38mm diameters. They come in a range ofsizes from 400mm to 1400mm.All versions are suitable for bolt-thro (single side fixing) or back to back fixing.Also available with straight or offset pillar (327 straight / 328 offset)

99 Series Pad HandlesThe 99 series is a range of attractive pad handles.Functional handles are designed for aluminium, timber or glass door applications.

Selecta Range

This handle design embodies all the features of the other handle ranges available, but with the stylishdouble grooved design offers the client an additional aesthetic element to complement the mostcontemporary of both internal and external door appearance. Manufactured in a unique one piecedesign the Selecta range of door handles comes in a variety of standard fixing centres available fromour extensive ex-stock range.

Additionally bespoke Selecta handles can be made to order with a turn-around time of 10 workingdays from receipt of official order. However please note bespoke Selecta handles do not have agrooved design.

5

Impressionist 01 series www.alpro.co.uk 01202 676262

pull handlesImpressionist 01 series

6

Series Diameter Ø Centres Projection Throw Overrun Finish Code

Imp 01 32 250 / 300 / 400 80 N/A N/A Satin Anodised SAA

Imp 01 38 250 / 300 / 400 80 N/A N/A Satin Stainless SSS

Polished Stainless PSS

Powder Coated PC

Nylon Coated NC

Ordering Guide - please specify the following details:

Series ø Size Fixing Kit Finish Door Type

Imp 01 32 250 F19 SSS Aluminium

Colour options

For Powder coated and Nyloncoated handles please contactour Sales Team on 01202 676262for price and availability.Notes

Handles can be produced to your special requirements.Handles are supplied with bolt-thro or back to back fixing asstandard.Fixing kit information can be found at the back of this catalogue.Stainless steel handles are manufactured from 304 grade stainlesssteel. Grade 316 is available on request. Please specify at time oforder.Powder coated and Nylon coated handle colours are not ex-stockcolours. Additional lead times should be allowed for these itemsand may be subject to a paint surcharge.

All dimensions shown are in millimetres 80

Ø32

mm

ce

ntr

e li

ne

rad

ius

= 48

mm

38m

m c

en

tre

lin

e ra

diu

s =

57m

m

Fixi

ng

Ce

nrt

es

Grub Screw Handle

F19 FixingsM12-85mm with M6 Grub Screw




Imp 02 32 250 / 300 / 400 80 140 N/A Satin Anodised SAA

Imp 02 38 250 / 300 / 400 80 140 N/A Satin Stainless SSS


Powder Coated PC

Nylon Coated NC




The following Nylon coatedcolours are available ex stock in32mm Ø only:

Black (RAL9005)White (RAL9010)Ultra Marine Blue (RAL5002)White Aluminium (RAL9006)Agate Grey (RAL7038)

Additional colours are availableat extra cost with a 10 workingday lead time.If the finish you require is notshown please contact us.

NotesHandles can be produced to your special requirements.Handles are supplied with bolt-thro or back to back fixing asstandard.Fixing kit information can be found at the back of this catalogue.Stainless steel handles are manufactured from 304 gradestainless steel. Grade 316 is available on request. Please specifyat time of order.

14080

32m

m c

en

tre

lin

e ra

diu

s =

48m

m38

mm

ce

ntr

e li

ne

rad

ius

= 5

7mm

Fixi

ng

Ce

nrt

es

Grub Screw Handle


All dimensions shown are in millimetres

7


pull handlesImpressionist 03 Series

8


Imp 03 32 250 80 N/A N/A Satin Anodised SAA

Imp 03 38 350 80 N/A N/A Satin Stainless SSS


Powder Coated PC

Nylon Coated NC




Colour options


Handles can be produced to your special requirements.Handles are supplied with bolt-thro or back to back fixing asstandard.Fixing kit information can be found at the back of this catalogue.Stainless steel handles are manufactured from 304 grade stainlesssteel. Grade 316 is available on request. Please specify at time oforder.Powder coated and Nylon coated handle colours are not ex-stockcolours. Additional lead times should be allowed for these itemsand may be subject to a paint surcharge.

80

Fixi

ng

Ce

nrt

es

Grub Screw Handle






Imp 05 32 300 / 400 80 N/A 5 Satin Anodised SAA

Imp 05 38 300 / 400 80 N/A 5 Satin Stainless SSS


Powder Coated PC

Nylon Coated NC




The following Nylon coatedcolours are available ex stock in32mm Ø only:

Black (RAL9005)White (RAL9010)Ultra Marine Blue (RAL5002)White Aluminium (RAL9006)Agate Grey (RAL7038)

Additional colours are availableat extra cost with a 10 workingday lead time.If the finish you require is notshown please contact us.

NotesHandles can be produced to your special requirements.Handles are supplied with bolt-thro or back to back fixing asstandard.Fixing kit information can be found at the back of this catalogue.Stainless steel handles are manufactured from 304 grade stainlesssteel. Grade 316 is available on request. Please specify at time oforder.Powder coated and Nylon coated handle colours are not ex-stockcolours. Additional lead times should be allowed for these itemsand may be subject to a paint surcharge.

80

25Ø

Centre Line Radius

as per Fixing Centre

17

300

& 4

00m

m F

ixin

g C

en

rte

s

Grub Screw Handle



9


97-325 41 305 - 3000 82 N/A N/A Satin Anodised SAA

97-325.b/b 41 305 - 3000 82 N/A N/A Satin Stainless SSS

97-326 41 305 - 3000 82 39 N/A Polished Stainless PSS

97-326.b/b 41 305 - 3000 82 39 N/A Powder Coated PC

Nylon Coated NC



97-325 41 305 F27 SSS Aluminium

Colour options

For Powder coated and Nyloncoated handles please contactour Sales Team on 01202 676262for price and availability.

NotesHandles can be produced to your special requirements.Handles are supplied with bolt-thro or back to back fixing asstandard.Fixing kit information can be found at the back of this catalogue.Stainless steel handles are manufactured from 316 grade stainlesssteel.Powder coated and Nylon coated handle colours are not ex-stockcolours. Additional lead times should be allowed for these itemsand may be subject to a paint surcharge.Centre bracket recommended for applications of 2400mm andover. Please specify at time of order if the length given is overallhandle length or the cross centres of the fixing holes. THIS ISIMPORTANT.

Functional 97 series www.alpro.co.uk 01202 676262

pull handlesFunctional 97 Series

50

65°

82

3838

Note

: centre b

racke

t re

com

mended fo

r 253

0mm

and o

ver a

pplic

atio

ns

Desir

ed Length

19m

m to H

ole

CentreBack to

Back Shown

Mirror Image

Ends Capped

45

82

Ends Capped

97-325Straight pull handle

97-326Offset pull handle


10

Functional 98 series www.alpro.co.uk 01202 676262

pull handlesFunctional 98 series


98-327 32 & 38 400 - 1600 80 N/A 50 Satin Anodised SAA

98-327.b/b 32 & 38 400 - 1600 80 N/A 50 Satin Stainless SSS

98-328 32 & 38 400 - 1600 80 N/A 50 Polished Stainless PSS

98-328.b/b 32 & 38 400 - 1600 80 N/A 50 Powder Coated PC

Nylon Coated NC



98-327 32 400 F21 SSS Aluminium

Colour options


98-327 Straight pull handle98-328 Offset pull handleHandles can be produced to your special requirements.Handles are supplied with bolt-thro or back to back fixing asstandard.Fixing kit information can be found at the back of this catalogue.Stainless steel handles are manufactured from 304 gradestainless steel. Grade 316 is available on request. Please specifyat time of order.Powder coated and Nylon coated handle colours are not ex-stock colours. Additional lead times should be allowed for theseitems and may be subject to a paint surcharge.

50Ø

32Ø

Len

gth

Grub Screw

32Ø Handle

32ØHandle

50m

m50

mm



11


99-329 N/A N/A 50 N/A N/A Satin Anodised SAA

99-330 N/A N/A 30 N/A N/A Powder Coated PC

Mill MILL



99-329 N/A N/A N/A SSS Aluminium

Colour options


Fixing kit information can be found at the back of this catalogue.Powder coated and Nylon coated handle colours are not ex-stockcolours. Additional lead times should be allowed for these itemsand may be subject to a paint surcharge.

Functional 99 series - Pad handles www.alpro.co.uk 01202 676262

pull handlesFunctional 99 series - Pad Handles

30 200

50

99-329

99-330

200

9595


12

Selecta 01 Range www.alpro.co.uk 01202 676262

pull handlesSelecta 01 Range


Selecta 01 32 300 / 400 / 600 80 N/A N/A Satin Anodised SAA

38 300 / 400 / 600 80 N/A N/A Satin Stainless SSS


Powder Coated PC

Nylon Coated NC



Selecta 01 32 300 F19 SSS Aluminium

Colour options


Addiitionally bespoke handles can be made to order.However please note bespoke Selecta handles do not have agrooved design.Handles are supplied with bolt-thro or back to back fixingas standard.Fixing kit information can be found at the back of this catalogue.

Straight ‘D’ Handle

80

Ø

32m

m c

en

tre

lin

e ra

diu

s =

48m

m38

mm

ce

ntr

e li

ne

rad

ius

= 57

mm

Fixi

ng

Ce

ntr

e

Grub Screw Handle



13

Colour options

For Powder coated and Nyloncoated handles please contactour Sales Team on 01202 676262for price and availability.

Selecta 02 range www.alpro.co.uk 01202 676262

pull handlesSelecta 02 range


Selecta 02 32 300 / 400 / 600 80 140 N/A Satin Anodised SAA

38 300 / 400 / 600 80 140 N/A Satin Stainless SSS


Powder Coated PC

Nylon Coated NC




NotesAddiitionally bespoke handles can be made to order.However please note bespoke Selecta handles do not have agrooved design.Handles are supplied with bolt-thro or back to back fixingas standard.Fixing kit information can be found at the back of this catalogue.

Offset Cranked ‘D’ Handle

80140

Ø

32m

m c

en

tre

lin

e ra

diu

s =

48m

m38

mm

ce

ntr

e li

ne

rad

ius

= 57

mm

Fixi

ng

Ce

ntr

e

Grub Screw Handle



14

Selecta 98 range www.alpro.co.uk 01202 676262

pull handlesSelecta 98 range


Selecta 98 32 300 / 400 / 600 80 N/A 50 Satin Anodised SAA

38 300 / 400 / 600 80 N/A 50 Satin Stainless SSS


Powder Coated PC

Nylon Coated NC




Straight Pull Handle

Colour options


Addiitionally bespoke handles can be made to order.However please note bespoke Selecta handles do not have agrooved design.Handles are supplied with bolt-thro or back to back fixingas standard.Fixing kit information can be found at the back of this catalogue.

5050

Ø

25Ø

50

Fixi

ng C

ent

re

Grub Screw HandleHandle



15

Fixing information www.alpro.co.uk 01202 676262

pull handlesFixing information

All Alpro handles are supplied with their own dedicated fixing packs, which suit all the possible doormaterials available. Full fixing and maintenance instructions are included in the handle kits, to ensurethe correct methodology is employed when fixing the handles. In the event of the fixing kits beingmislaid or broken, replacement kits are available by contacting the Alpro sales office on 01202676262 and specifying the necessary requirements.

F1739-54mm thick doors

For 32 & 38mm Ø Impressionist handles

M12-70mm countersunk



M12-95mm countersunk



M12-85mm with M6 grub screw




16



32Ø HANDLE32Ø HANDLE

F21Glass doors



F22 Secret fixingFor fixing to a wooden door 25mm deep


NB - Use these fixings for timber doors only



M12-70mm countersunk with dome cap

F276.5mm Ø clearance hole required

For Functional 97 Series handles



17



F34M12 fixings


M12 x 25mm long hexagon headed bolt

grade 8.8.

F38For Functional 97 Series handles only

M6 x 20mm long countersunk bolt and 4 off

No. 8 x 25 long wood screws

HOLE SIZES FOR FIXING THROUGH:

For M12 fixing - Wood & Aluminium = 13mm Ø

For M12 fixing - Glass = 18mm Ø



18

Bespoke Handles www.alpro.co.uk 01202 676262

pull handlesBespoke Handles

As an independent door hardware manufacturer, AlproArchitectural Hardware is able to offer customers tailor madesolutions to accommodate all of their design requirements.Illustrated below is just a sample of the various design solutionsprovided by Alpro in response to various criteria specified bythe clients involved.

These solutions include St Margaret Mary’s church atSouthampton, where Alpro provided polished stainless steelhandles fitted to large glass entrance doors to complete animposing aesthetic design for the building.

When an international bathroom organization needed abespoke handle for their new range of shower enclosures, theyturned to Alpro to design and manufacture a slim andaesthetically looking stainless steel handle. Delivered inscheduled consignments, Alpro manufactured, packed andbar coded the product in accordance with client requirementsto ensure a successful launch and continuity of manufacture.

Stannah Lifts needed stainless steel handles to a particularhandle size and again Alpro were able to supply the requiredhandle to their specification, for use on the Stannah platformlifts for the disabled. Stannah Managing Director AlistairStannah commented “The quality and service we receivedfrom Alpro, coupled with a competitive price, made thedecision to use Alpro a simple one. As a company we are verysatisfied with every aspect of the association with Alpro.”

As part of a refurbishment at Greville Secondary School, Alprowas tasked with manufacturing "Selecta" modular designedhandles for the new entrance doors. Manufactured in polishedstainless steel the handles were 600mm centres and 32mm indiameter. The modular design allowed Alpro to take individualcomponents and construct a particular design for the client.The modular design of the handles further allowed delivery andinstallation time to be kept to an absolute minimum, therebyallowing the client peace of mind with regard to completiondates. Another example of Alpro working in tandem withcustomers to fulfil demanding contractual requirements on site.

Alpro manufacturing facility is further reinforced by the internalsales and support structure to ensure a comprehensive servicefrom initial order enquiry through to final delivery and invoicing.Once again offering the customer First Choice solutions.

St MargaretMary’sChurch

IdealStandardShowerEnclosure

StannahLifts

GrevilleSecondarySchool

19

Disabilites Discrimination Act 2004 www.alpro.co.uk 01202 676262

pull handlesDisabilities Discrimination Act 2004

QWhat are the new regulationsdesigned to achieve?

A In a word, Equality. The newlegislation is about the civil rights ofdisabled people receiving the sameservices and provisions that areavailable for the non disabled. It isabout removing barriers, in areassuch as attitude, environment andorganisation.

QHow will this affect ingress andegress to and from buildings?

A Disabled people need to be able toget inside buildings, move aroundfreely once inside and exit in a safeway. This may mean wider doorways,signage that can be seen from aseated or standing position, colourcontrasts for door furniture, autodoor operators, audio information,adequate way finding and levelaccess or lift access.

QHow will this affect door design?A The requirements for the design ofdoors will vary according to locationand context. These requirements arecomprehensively covered by BS8300and Document M. Contained withinthese publications are door closerstrengths and colour contrastinformation with regard to doorfurniture. Although it should be notedthat both of these areas are thesubject of ongoing debate, with theOffice of the Deputy Prime Minister.Once these areas have beenagreed and resolved it may be thatBS8300 is rewritten, incorporatingnew or additional requirements.

QDo I have to comply with the newlegislation?

A Yes, but the major issue here is whatis seen as “Reasonable Adjustment”on the part of the service provider.The context of the building has to betaken into account and whetherthere are other ways of achievingcompliance. For example is there anadditional entrance into thebuilding, other than the primary frontentrance? Perhaps access to thebuilding can be achieved through aside entrance that is already wideenough to accept wheelchairs.Advice needs to sought from theBuilding Control officer. SinceDecember 1996 it has been unlawfulto treat disabled people lessfavourably because of theirdisability. Since October 2004service providers have a duty tomake “Reasonable Adjustments”.

QWhat are the requirements for doorfurniture?

A The regulations at present state thatthere should be a colour contrastbetween the door finish and thedoor furniture, and that the doorfurniture is not cold to the touch.Recent research has shown that amatt finish is better suited for thevisually impaired. Currentlydiscussions are ongoing with theOffice of the Deputy Prime Minister toclarify the exact requirements.Additional information can beobtained from Alpro.

QHow will the legislation beenforced?

A Enforcement of Part 3 of the DDAlegislation will be by individualstaking service providers to court tosue if they feel they have beentreated unfairly. The court will thenlook at the “ReasonableAdjustments” made. Discriminationwill be deemed to have taken placeif the service provider cannot showthat the treatment in question isjustified. The court will judge on“What is reasonable in all thecircumstances of the case”. Part Mrequires “Reasonable Provision” tomake buildings accessible,compliance with Part M can be usedto establish “Reasonable Adjustment”under the DDA legislation.

QWho has to comply with the act?A Anybody who provides a service.The provision of services includes theprovision of any goods or facilities.It is irrelevant whether the service isprovided without payment.

Additional Information• Local planning authority.• Building Regulations Part M 2004Edition “Access to and use ofbuildings”.

• BS8300 (2001) “Design of buildingsand their approaches to meet theneeds of disabled people”.

• BS7036 Code of Practice for Safetyat Powered Doors for pedestrian use.

DDA Part 3 Provision of Services December 1996 - October 2004The building regulations control how you carry out construction and modifications to your property.

The legislation that governs the accessibility of buildings, with regards to disabled people has been significantly revised. TheDisability and Discrimination Act Part 3, Provision of Services, became law on the 1st October 2004. From this moment intime the requirements for service providers to make “Reasonable adjustments” to their buildings to ensure disabled peoplecan access services has changed. You need therefore to be aware of how this legislation will affect you.

The LegislationThe Discrimination Act 1995, as amended by the Special Education Needs and Disability Act 2001 (SENDA). BuildingRegulations Part M revised to meet new standards (May 2004). These standards are comprehensively summarised in BS8300(2001), Design of Buildings and their approaches to meet the needs of disabled people.

This information has been designed to help you, to continue to order and use Alpro products, with the confidence that therequirements of the new legislation are being met.

20

Care & Maintenance www.alpro.co.uk 01202 676262

pull handlesCare & Maintenance

Factors Affecting MaintenanceSurface contamination and the formation of depositsmust be prevented. These deposits may be minuteparticles of iron or rust from other sources used on thebuilding of new premises and not removed until afterthe stainless steel items have been fixed. Industrial andeven naturally occurring atmospheric conditions canproduce deposits, which can be equally corrosive,e.g. salt deposits from marine conditions.Working environments can also provide aggressiveconditions such as heat and humidity, in swimmingpool buildings. These conditions can result in surfacediscoloration of stainless steels and so maintenanceon a more frequent basis may be required.Modern processes use many cleaners, sterilizers andbleaches for hygienic purposes. Proprietary solutions,when used in accordance with makers’ instructions,should be safe but if used incorrectly (e.g. warm orconcentrated), may cause discolouration or corrosionon stainless steels. Strong acid solutions are sometimesused to clean masonry and tiling of buildings. Theseacids should never be used where contact withmetals, including stainless steel is possible, but if thishappens, the acid solution must be removedimmediately, followed by dilution and rinsing withclean water.

Maintenance ProgrammeWith care taken during fabrication and installation,cleaning before “hand-over” should not present anyproblems. More attention may be required if theinstallation period has been prolonged or hand-overdelayed. Where surface contamination is suspected,immediate cleaning after site fixing should avoidproblems later. Food handling, pharmaceutical,aerospace and certain nuclear applications requiredextremely high levels of cleanliness applicable toeach industry.The frequency of cleaning is dependent on theapplication; a simple rule is; “Clean the metal when itis dirty in order to restore its original appearance”. Thismay vary from once to four times a year for externalapplications, but may be daily for items in “hygienic”applications. Recommendations on cleaningfrequencies in architectural applications are shown inTable 2.

Cleaning MethodsStainless steel is easy to clean. Washing with soap ormild detergent and warm water followed by a clearwater rinse is usually quite adequate for domestic andarchitectural equipment.Where stainless steel has become extremely dirty withsigns of surface discolouration (perhaps followingperiods of neglect, or misuse) alternative methods ofcleaning can be used, as outlined in the Table 1.

AcknowledgementsStainless Steel Advisory Service 12th March 2001.

ReferencesAssessment of Cleaners and Polishes for use onStainless SteelBritish Steel Swinden technology Centre-ConfidentialReport SL/SSE/RGC/S1147/1/97/RPF Freeman.

Architects Guide to Stainless SteelSteel Construction Insititute-SCI-P-179N Baddoo,R Burgan,R Ogden.

PLEASE NOTE: before commencing any tasks ensurethat you have received the appropriate health andsafety literature from the supplier and that you fullyunderstand it. If in any doubt please seek advice.The advice provided is given in good faith butwithout responsibility.

Care & Maintenance of Alpro Coatedand Anodised HandlesFor the maintenance of coated handles, a mildsolution of warm water and appropriate detergent issuggested. All surfaces of the handle should becleaned, using a soft cloth or brush and driedthoroughly. Again a frequency of every three to sixmonths is suggested.

Satin anodised door furniture, should be wiped overwith a damp cloth and thoroughly dried, a wipe overwith wax polish is then suggested to ensure ongoingaesthetics. Never use metal cleaning agents onaluminium anodised furniture.

Care & Maintenance of Alpro Stainless Steel Handles

IntroductionStainless steels are selected in applications where their inherent corrosion resistance, strength and aestheticappeal are required. However, dependent on the service conditions, stainless steels will stain and discolour dueto surface deposits and so cannot be assumed to be completely maintenance free. In order to achievemaximum corrosion resistance and aesthetic appeal, the surface of the stainless steel must be kept clean.Provided the grade of stainless steel and the surface finish are correctly selected, and cleaning schedulescarried out on a regular basis, good performance and long service life will result.

21

Care & Maintenance www.alpro.co.uk 01202 676262

pull handlesCare & Maintenance

Table 1 - Summary of Cleaning Methods for Stainless Steel

Table 2 - Cleaning Frequency in Architectural Applications for Common StainlessSteel Grades Specified (See reference 2)Location 1.4016 (430) 1.4301 (304) 1.4401 (316)

Internal As required to maintain appearance or design

Suburban or rural 6-12 month intervals (as appropriate to location and design)

Industrial or urban Not recommended 3-6 months 6-12 months

Coastal or marine Not Recommended Not recommended 6-12 months

RequirementRoutine cleaning of lightsoiling

Fingerprints

Oil and grease marks

Stubborn spots, stains andlight discolouration.Watermarking. Light ruststaining

Burnt on food or carbondeposits

Tannin (tea) stains and oilydeposits in coffee urns

Adherent hard water scalesand mortar/cementsplashes

Heating or heavydiscolouration

Badly neglected surfaceswith accumulated grimedeposits

Paint, graffiti

Suggested MethodSoap, detergent or dilute (1%) ammoniasolution in warm clean water. Apply witha clean sponge, soft cloth or soft-fibrebrush then rinse in clean water and dry.

Detergent and warm water, alternatively,hydrocarbon solvent.

Hydrocarbon solvents (methylated spirit,isopropyl alcohol or acetone).

Mild, non-scratching creams andpolishes. Apply with soft cloth or softsponge and rinse off residues with cleanwater and dry.

Pre-soak in hot water with detergent orammonia solution. Remove deposits withnylon brush and fine scouring powder ifnecessary. Repeat if necessary andfinish with ”routine cleaning”.

Tannin stains - soak a hot solution ofwashing soda i.e. sodium carbonateCoffee deposits - soak in a hot solutionof baking soda (sodium bicarbonate).

10-15 volume % solution of phosphoricacid. Use warm neutralise with diluteammonia solution, rinse with clean waterand dry. Alternatively soak in a 25%vinegar solution and use a nylon brushto remove deposits.

a) Non-scratching cream or polish e.g.Solvol Auto Chrome Metal Polish.

b) Nylon-type pad, e.g.’Scotchbrite’.

A fine, abrasive paste as used for carbody refinishing, e.g. ‘T-Cut’ rinsed cleanto remove all paste material & dried.

Proprietary alkaline or solvent paintstrippers, depending upon paint type.Use soft nylon or bristle brush onpatterned surfaces.

CommentsSatisfactory on most surfaces.

Proprietary spray-applied polishes availableto clean and minimise remarking.

Alkaline formulations are also available withsurfactant additionse.g.”D7” Polish.

Avoid cleaning pastes with abrasive additions.Suitable cream cleansers are available withsoft calcium carbonate additions, e.g. “Cif”,or with the addition of citric acid, e.g. “ShinySinks”. Do not use chloride solutions.

Abrasive scouring powder can leave scratchmarks on polished surfaces.

These solutions can also applied with a softcloth or sponge. Rinse with clean water.Satisfactory on most surfaces.

Proprietary formulations available withsurfactant additions Take special care whenusing hydrochloric acid based mortarremovers.

Creams are suitable for most finishes, but onlyuse “Solvol” on bright polished surfaces. Someslight scratching can be left. Use on brushedand polished finishes along the grain.

May brighten dull finishes.To avoid a patchy appearance, the wholesurface may need to be treated.

Apply as directed by manufacturer.

22

Other products www.alpro.co.uk 01202 676262

alproOther products Architectural Hardware

©

Door HardwareAlpro offer a complete range ofaluminium door hardware offeringexcellent levels of security and quality.

The range includes:

• Europrofile Deadlocks• Round Mortise Cylinder Deadlocks• Europrofile Deadlatches• Round Mortise Cylinder Deadlatches• Lever & Paddle Handles• Lock Accessories• Flush Bolts• Armoured Strikes• Digital Locks• Door Closers• Magnets

Access ControlAlpro also offer a comprehensiverange of high quality, high securityaccess control products to suit eventhe most demanding of situations.

The range includes:

• Electric Strikes• Solenoid Bolts• Mini Solenoid Bolts• Infrared Proximity Switches• Compact Shearlocks• Cabinet Locks• Waterproof Keypads• Waterproof HID Prox Keypads• Waterproof Exit Switches• Interlock Controllers• Power Supply Units

23

012 0 2 6 7 6 2 6 2 0 1 2 0 2 6 8 01 0 [email protected] www.alpro.co.uk

TFEW

We are a family owned company founded in 1938 tosupply quality mechanical components. Today we servea broad band of industry with a wide range of qualityproducts.

These are manufactured by companies of internationalrepute who are each specialists in their own field.

We are approved to BS EN ISO 9001:2008.

• Experienced informative staff give fast, effectiveand friendly service.

• Technical support nationwide.

• Competitive and cost effective solutions.

• CAD design facility.

• Large stocks - same day despatch - Kanban andJIT deliveries.

• Modern technology combined with people.

• Listen, communicate - no surprises!

• Think long term - everlasting customers.

We a im to p rov ide the bes t in bo th p roduc t s and se r v i ce

Our difference...

alpro®

... the team that cares

Integr i ty • Exper t i se • Commitment

IEC Limited, Harwell Road, Nuffield Estate, Poole, Dorset BH17 0BD Great Britain

Registered in England 1925537 RS00117

l n h commitment to excellence o d - shaws of brighton · alpro’s flexible facilities enable...

Documents