label an icet laceent specification - la-z-boy files/workinstructions...label an icet laceent...
TRANSCRIPT
Page 1 of 793000522-00/Rev8.03/2015
Label and Ticket Placement Specification
Staple the law label to backside of right side (sitting) upholstered legrest, near the top edge and centered side-to-side.
* CA TB 117-2013 & SB1019 Label
Locate and staple adjacent to the law label.
RECLINERS & RECLINA-WAY MOTION SOFASWITH WOOD FRONT RAILS
The instructions on this page apply to the Recliners and Reclina-Way Motion Sofas listed below:Recliners010 Reclina-Rocker reclining chair016 Reclina-Way reclining chair017 Reclina-Glider swivel recliner01M Reclina-Rocker with 2-motor massage &
heat reclining chairP1M Power Reclina-Rocker with 2-motor
massage & heat reclining chairP10 Power Reclina-Rocker reclining chair1HR Power Reclina-Rocker reclining chair with
power lumbar and headrestP16 Power Reclina-Way reclining chair
Motion Sofas330 Reclina-Way reclining sofa320 Reclina-Way reclining loveseat390 Reclina-Way reclining loveseat with console33P Power Reclina-Way reclining sofa32P Power Reclina-Way reclining loveseat39P Power Reclina-Way reclining loveseat with
console
Rocking Loveseat Recliners30L Left side (sitting) rocker recliner30R Right side (sitting) rocker recliner3PL Power left side (sitting) rocker recliner3PR Power right side (sitting) rocker recliner
Luxury Lift Power Recliners1PL Luxury Lift Platinum power recliner 1PM Luxury Lift Platinum power recliner with
6-motor massage and heat4LP Luxury Lift Silver power recliner
Follow the instructions and illustrations on the right to attach the production ticket items, including: the law label, the product ID label and the fabric cleaning & patents label. Refer to the Stapling Specification on page 7.
*CA TB 117-2013 & SB1019 label, item no. 18.000033, must be attached adjacent to the law label using staples and to all products.
Right Side (Sitting) Unit
RECLINERS - Law Label Staple the law label to backside of upholstered legrest, near the top edge and centered side-to-side.
MOTION SOFAS - Product ID & Fabric Cleaning/Patents Labels Staple the labels on the backside of the right side (sitting) upholstered front rail.
RECLINERS - Product ID & Fabric Cleaning/Patents LabelsStaple the labels on the backside of the upholstered front rail.
Right Side(Sitting) Unit
MOTION SOFAS -Law Label
* CA TB 117-2013 & SB1019 Label
Locate and staple adjacent to the law label.
*
*
Page 2 of 793000522-00/Rev8.03/2015
Label and Ticket Placement Specification
The instructions on this page apply to the Recliners listed below:Luxury Lift Power Recliners1HL Luxury Lift Gold power recliner with heat1ML Luxury Lift Gold power recliner with
6-motor massage and heat
Follow the instructions and illustrations on the right to attach the production ticket items, including: the law label, the product ID label and the fabric cleaning & patents label. Refer to the Stapling Specification on page 7.
*CA TB 117-2013 & SB1019 label, item no. 18.000033, must be attached adjacent to the law label using staples and to all products.
LIFT RECLINERS WITH METAL FRONT RAILS
Staple the law label to backside of upholstered legrest, near the bottom edge of the legrest clevis assembly bracket and centered side-to-side.
LIFT CHAIRS - Law Label
LIFT CHAIRS - Product ID & Fabric Cleaning/Patents Labels Staple the product ID label to right side (sitting), rear inside arm panel. Staple the fabric cleaning/patents label to the left side (sitting), rear inside arm panel.
RSS - Product ID Label
LSS - Fabric Cleaning/Patents Label
* CA TB 117-2013 & SB1019 Label
Locate and staple adjacent to the law label.
*
Legrest Clevis Assembly Bracket
Page 3 of 793000522-00/Rev8.03/2015
Label and Ticket Placement Specification
MOTION MODULARS -Product ID & Fabric Cleaning/Patents Labels Staple the labels on the backside of the right side (sitting) front post. For units without a right arm, staple to the left side (sitting) front post. For armless units, staple to bottom side of the rear seat rail.
LA-Z-TIME RECLINERS & RECLINING SOFAS -Law LabelStaple the law label to backside of upholstered legrest, near the top edge and centered side-to-side. For sofa & loveseat styles, apply to the right side (sitting) legrest.
LA-Z-TIME RECLINING MOTION UPHOLSTERY & MOTION-MODULARS
The instructions on this page apply to the La-Z-Time Motion Upholstery and Motion-Modulars listed below:La-Z-Time Motion Upholstery410 La-Z-Time recliner430 La-Z-Time reclining sofa, 2 cushion440 La-Z-Time reclining sofa, 3 cushion480 La-Z-Time reclining loveseat490 La-Z-Time reclining loveseat with middle
console
Power La-Z-Time Motion Upholstery41P Power La-Z-Time recliner43P Power La-Z-Time reclining sofa, 2 cushion44P Power La-Z-Time reclining sofa, 3 cushion48P Power La-Z-Time reclining loveseat49P Power La-Z-Time reclining loveseat with
middle console
La-Z-Time Motion-Modular40A La-Z-Time left arm (sitting) recliner40B La-Z-Time right arm (sitting) recliner40D La-Z-Time left arm (sitting) recliner with
non-reclining armless middle40E La-Z-Time right arm (sitting) recliner with
non-reclining armless middle40S La-Z-Time armless recliner
Power La-Z-Time Motion-Modular4AP Power La-Z-Time left arm (sitting) recliner4BP Power La-Z-Time right arm (sitting) recliner4DP Power La-Z-Time left arm (sitting) reclining
loveseat4EP Power La-Z-Time right arm (sitting) reclining
loveseat4SP Power La-Z-Time armless recliner4AH PowerRecline+ La-Z-Time left arm (sitting)
recliner with power lumbar and headrest4BH PowerRecline+ La-Z-Time right arm (sitting)
recliner with power lumbar and headrest.4SH PowerRecline+ La-Z-Time armless recliner
with power lumbar and headrest
Follow the instructions and illustrations on the right to attach the production ticket items, including: the law label, the product ID label and the fabric cleaning & patents label. Refer to the Stapling Specification on page 7.*CA TB 117-2013 & SB1019 label, item no. 18.000033, must be attached adjacent to the law label using staples and to all products.
Right Side(Sitting) Unit
MOTION MODULARS - Law LabelStaple the law label to the backside of the right side (sitting) upholstered legrest, near the top edge and centered side-to-side. For units without a right arm, apply to the left side (sitting) legrest.
Left Side(Sitting)
Unit
LA-Z-TIME RECLINERS & RECLINING SOFAS - Product ID & Fabric Cleaning/Patents LabelsStaple the labels on the backside of the right side (sitting) front post.
Right Side(Sitting) Unit
Left Side(Sitting) Unit
*
* CA TB 117-2013 & SB1019 Label
Locate and staple adjacent to the law label.
* CA TB 117-2013 & SB1019 Label
Locate and staple adjacent to the law label.
*
Rear Seat Rail
Page 4 of 793000522-00/Rev8.03/2015
Label and Ticket Placement SpecificationCLASSICS HIGH LEG AND LOW PROFILE RECLINERS & COMPLEMENTS SWIVEL CHAIRS
The instructions on this page apply to the Classics Recliners, and the Swivel Chairs listed below:Classics Recliners025 Low profile recliner with 3-position
mechanism028 High leg recliner with 2-position
mechanism029 High leg recliner with 3-position
mechanism
Complements Swivel Chairs020 Swivel rocker021 Swivel occasional chair022 Swivel glider
Follow the instructions and illustrations on the right to attach the deck label and the production ticket items, including: the law label, the product ID label and the fabric cleaning & patents label. Refer to the Stapling Specification on page 7.
*CA TB 117-2013 & SB1019 label, item no. 18.000033, must be attached adjacent to the law label using staples and to all products.
CLASSICS - Law, Product ID & Fabric Cleaning/Patents LabelsStaple law, product ID & fabric cleaning/patents labels to bottom of mounting rail. If unit has two mounting rails, staple to the front one.
CLASSICS & SWIVEL CHAIRS - Deck LabelFor classics and swivel chairs with loose seats, adhere the deck label to the center seat deck, 1" - 2" from the front seam.
SWIVEL CHAIRS - Law, Product ID & Fabric Cleaning/Patents LabelsStaple labels as shown. The law label must be at the front of the unit. The product ID label must be on the bottom of the right side (sitting) arm rail.
Right Side
(Sitting)
* CA TB 117-2013 & SB1019 Label
Locate and staple adjacent to the law label.
* CA TB 117-2013 & SB1019 Label
Locate and staple adjacent to the law label.
**
Page 5 of 793000522-00/Rev8.03/2015
Label and Ticket Placement SpecificationSTATIONARY CHAIRS (COMPLEMENTS, STATIONARY, PREMIER), CHAISE LOUNGES & STATIONARY SECTIONALS (STATIONARY, PREMIER)
The instructions on this page apply to the Stationary Chairs, Chaise Lounges and Sectional Seating Units listed below:Stationary Chairs and Chaises023 Stationary chair230 Premier stationary chair02L Left side (sitting) chaise lounge02R Right side (sitting) chaise lounge20L Premier Left side (sitting) chaise lounge20R Premier Right side (sitting) chaise lounge
Stationary Sectional Seating Units03C Corner Unit03D Left arm (sitting) sofa03E Right arm (sitting) sofa03L Left arm (sitting) chaise03R Right arm (sitting) chaise03M Armless middle 03W Left arm (sitting) sofa with corner03X Right arm (sitting) sofa with corner
Premier Stationary Sectional Seating Units60A Left arm (sitting) chair60B Right arm (sitting) chair 60C Corner unit6CC 90-degree corner6CL Left arm (sitting) cuddler6CR Right arm (sitting) cuddler60L Left arm (sitting) chaise 60R Right arm (sitting) chaise60M Armless middle
Modular Seating Units04C Corner unit 04M Armless middle unit04T Armless middle unit with drawer and table 04Q Left arm (sitting) chaise04V Right arm (sitting) chaise 4QQ Left arm (sitting) reclining chaise4VV Right arm (sitting) reclining chaise
Follow the instructions and illustrations on the right to attach the deck label and the production ticket items, including: the law label, the product ID label and the fabric cleaning & patents label. Refer to the Stapling Specification on page 7.
*CA TB 117-2013 & SB1019 label, item no. 18.000033, must be attached adjacent to the law label using staples and to all products.
STATIONARY CHAIRS, CHAISE LOUNGES & SECTIONALS (with loose seats) - Deck Label
CHAISE LOUNGES & CHAISE SECTIONALS - Law, Product ID & Fabric Cleaning/Patents LabelsStaple labels as shown. The law label must be toward the front of unit. The product ID label must be on right side (sitting). For armless units, staple to the bottom rear seat rail.
STATIONARY CHAIRS & SECTIONALS - Law, Product ID & Fabric Cleaning/Patents Labels
Adhere the deck label to the center seat deck, 1" - 2" from the front seam.
RSS Bottom Rail
Front
Staple labels as shown. The law label must be toward the front of unit. The product ID label must be on right side (sitting).
* CA TB 117-2013 & SB1019 Label
Locate and staple adjacent to the law label.
* CA TB 117-2013 & SB1019 Label
Locate and staple adjacent to the law label.
Rear Bottom Rail
Fron
t
*
*
Page 6 of 793000522-00/Rev8.03/2015
Label and Ticket Placement SpecificationSOFAS AND SLEEP SOFAS (STATIONARY, PREMIER), SECTIONAL SOFAS AND SLEEP SOFAS (STATIONARY, PREMIER) AND MODULAR SOFAS AND SLEEP SOFAS
The instructions on this page apply to the Sofas, Sleep Sofas, Sectional and Modular Sofas and Sleep Sofa Units listed below:Stationary sofas and sleep sofas051 Queen sleep sofa 052 Full sleep sofa 05S Queen sleep sofa and ottoman with
chaise cushion550 Twin sleep chair061 Sofa062 Apartment size sofa 063 Loveseat 06S Sofa and ottoman with chaise cushion650 Chair and a half
Premier sofas and sleep sofas510 Queen sleep sofa 520 Full sleep sofa 555 Twin sleep chair and a half610 Sofa61S Sofa and ottoman w/chaise cushion620 Apartment size sofa 630 Loveseat 655 Chair and a half
Premier sectional sofas and sleep sofas60D Left arm (sitting) sofa60E Right arm (sitting) sofa 6MM Armless loveseat 6SP Armless full sleeper
Modular sofas and sleep sofas04H Armless full sleep sofa 4MM Armless loveseat
Follow the instructions and illustrations on the right to attach the deck label and the production ticket items, including: the law label, the product ID label and the fabric cleaning & patents label. Refer to the Stapling Specification on page 7.
*CA TB 117-2013 & SB1019 label, item no. 18.000033, must be attached adjacent to the law label using staples and to all products.
SLEEPERS - Law, Product ID & Fabric Cleaning/Patents LabelsStaple law label to top of inside front rail. Staple product ID & fabric cleaning/patents labels in the same location as the sofas and loveseats, detailed above.
SOFAS, LOVESEATS & SLEEPERS - Deck LabelFor sofa, loveseat and sleeper styles with (1) or (3) seats, adhere the deck label to the center seat deck, 1" - 2" from the front seam or from the front of the sleeper deck.
SOFAS & LOVESEATS - Law, Product ID & Fabric Cleaning/Patents LabelsStaple labels as shown. The law label must be toward the front of unit. The product ID label must be on right side (sitting). For left arm only units, staple to left side (sitting). For armless units, staple to bottom rear seat rail.
SOFAS, LOVESEATS & SLEEPERS - Deck LabelFor sofa, loveseat and sleeper styles with (2) seats, adhere the deck label to the left side (sitting) seat deck, 1" - 2" from front seam or from the front of the sleeper deck. Do not center.
Front Rail
*
* CA TB 117-2013 & SB1019 Label
Locate and staple adjacent to the law label.
* CA TB 117-2013 & SB1019 Label
Locate and staple adjacent to the law label.
RSS Bottom Rail
Front
*
Page 7 of 793000522-00/Rev8.03/2015
Label and Ticket Placement SpecificationOTTOMANS AND CONSOLES
The instructions on this page apply to the Ottomans, Consoles and Wedges listed below:Ottomans024 Ottoman240 Premier ottoman
Consoles3CS Storage console 4CN Narrow wedge console4CS Storage console4CW Wedge console
Follow the instructions and illustrations on the right to attach the production ticket items, including: the law label, the product ID label and the fabric cleaning & patents label. Refer to the Stapling Specification below.
*CA TB 117-2013 & SB1019 label, item no. 18.000033, must be attached adjacent to the law label using staples and to all products.
Size and location of bottom rails vary by style; staple the labels to available bottom rails. Do not let labels hang or protrude from underneath the unit.
OTTOMANS - Law, Product ID & Fabric Cleaning/Patents Labels Staple the labels to the bottom of the short side rails. The product ID & fabric cleaning/patents labels may be placed side-by-side.
CONSOLES & WEDGE CONSOLES - Law, Product ID & Fabric Cleaning/Patents Labels
Law Label, Production ID Label, Fabric Cleaning/Patents Label and *18.000033 Label
Attach all labels and production ticket items face up. Do not stack or overlap labels or ticket items.
Attach the production ticket items to the frame, using either two or four staples.
When attaching items to a wide wood rail, use four staples, one in each corner as shown here.
When attaching items to a narrow wood rail, use two staples. Position the production ID label and fabric cleaning/patents label with the plain edge parallel to the outside edge of the rail, and staple along the plain edge of the ticket. When using two staples, do not staple along the edge with the form feed holes.
To prevent the production ID label, fabric cleaning/patents label and *18.000033 label from drooping or dropping over time, the labels may be slightly angled and more staples may be used. Plain Edge
Staples Staples
Stapling Specification
* CA TB 117-2013 & SB1019 Label
Staple below the law label.
* CA TB 117-2013 & SB1019 Label
Staple to available bottom rail.
*