laboratory& blood bank equipmentls 110.2 b `eltek’ lab stirrer, 1/8 hp motor, stirring shaft ss...

PRICELIST01-08-2018 CONTENTS–EASYLOCATE

EquipmentName PageNo.Terms&Conditionsofoffer 2

STIRRER Stirrers 3-8

CENTRIFUGES (9to28)Centrifuges–Medico,clinical,Pathology 9-10Centrifuges-GeneralPurpose&Cooling 10-11Centrifuges–Heamatocrite 11-12Centrifuges–Heamatocrite(Cooling) 12-15Centrifuge–Lowspeed/Cooling 15-20Centrifuge–HighSpeed/Cooling 20-22Centrifuge–OilTesting 23-25Centrifuge–HighVolume(Biotech/Pharma) 25-28

LABORATORYEQUIPMENTS (29to40)BacteriologicalIncubator 31CoolingB.O.D.Incubator 32DeepFreezer-20°C 29DeepFreezer-40°C 30DeepFreezer-80°C 30HotAirOvens 35-36MagneticStirrers 7-8Muf�leFurnace 36OilBaths 39-40OrbitalShakers 32-33Refrigerators2-8°C 29ShakingIncubators 33VacuumOvens 37-38VDRLShakers 32VortexMixer 8WaterBaths 38-39Waterstill 40SeedGerminator 34StabilityChamber 34

BLOODBANKEQUIPMENTS (41to44)BloodBagTubeSealers 43BloodBankCentrifuges 27-28BloodBankRefrigerators 41-42BloodCollectionMonitors 43BloodDonorCouch 41PlasmaExtractors 44PlasmaFreezers-40°C 42PlasmaThawingBaths 43PlateletAgitators 44PlateletIncubators 31RollerMixers 44UltraPlasmaFreezers-80°C 42

LABORATORY& BLOOD BANK EQUIPMENT

3

LABORATORYSTIRRERSWITHVARIABLESPEEDCONTROL

HIGHSPEEDLABORATORYSTIRRERS

Model Description HSNcode

GST%

LS 102 A èltek’ Lab Stirrer, 1/20 HP Motor with chuck & mount on speed regulator. Stirring Shaft ss 316- 6 x 250mm Long with 38 mm marine impeller. Cap.6-8 L

8479 18

LS 102 B èltek’ Lab Stirrer, 1/20 HP Motor with chuck, autovariac speed regulator. Stirring Shaft ss 316- 6 x 250mm long with 38 mm marine impeller Cap. 6-8 L

8479 18

LS 104.1 B èltek’ Lab Stirrer, 1/8 HP Motor with chuck and autovariac speed regulator. Stirring Shaft ss 316- 10 x 350mm Long with 50 mm marine impeller Cap 15-20 Liters.

8479 18

LS 104.2 B èltek’ Lab Stirrer, High Speed Homogenizer, 1/8 HP . Motor with autovariac speed regulator. Grinding pestle ss 316- 10 x 250mm Long with Te�lon pestle with either 25ml or 50 ml cup and pestle.

8479 18

SpareHomogenizerCupandGrindingPestleforusewithLS104.2B

LS 104.2B1 5 ml, 10 ml or 15 ml Capacity. 8479 18

LS 104.2B2 25 ml Capacity. 8479 18

LS 104.2B3 50 ml Capacity. 8479 18

LS 104.2B4 100 ml Capacity. 8479 18

LS 104.3 èltek’ High speed Soil Stirrer 1/8 HP Motor 14000 RPM, s. s. shaft 160 mm Long 3 bladed propeller 20mm sweep and 3 speed Selector Switch Cap.750ml.

8479 18

HEAVYDUTYBELTDRIVENSTIRRERWITHHOLLOWSHAFT&TILTINGARRANGEMENTWITHDIMMERSTATAUTOVARIACSPEEDREGULATOR.

LS 105.3 B èltek’ Lab Stirrer, 1/2 HP Motor, Hollow shaft assembly with belt drive, Stirring shaft ss 316, 12 x 1100 ml long with 2 Nos. 75 mm sweep marine impellers. Cap. 60-90 L.

8479 18

LS 105.5 B èltek’ Lab Stirrer, 1 HP Motor, Hollow shaft assembly with belt drive, Stirring shaft ss 316,12 x 1100 ml long with 2 Nos. 75 mm sweep marine impellers. Cap. 125 150Liters.

8479 18

HEAVYDUTYDIRECTDRIVENSTIRRER,S.S.SHAFTWITHCHUCK&DIMMERSTATAUTOVARIACSPEEDREGULATOR.

LS 107.1 B èltek’ Lab Stirrer, 1/4 HP Motor with chuck, ss 316 stirring shaft 12x 550 mm Long with marine impeller 75 mm sweep. Step less autovariac speed control Cap. 35-50 L.

8479 18

LS 107.3 B èltek’ Lab Stirrer, 1/2 HP Motor with chuck, ss 316 stirring shaft 12x 550 mm Long with marine impeller 75 mm sweep. Step less autovariac speed control Cap. 85-100 Liters.

8479 18

LS 107.4 B èltek’ Lab Stirrer, 3/4 HP Motor with chuck, ss 316 stirring shaft 12x 550 mm Long with marine impeller 75 mm sweep. Step less autovariac speed control Cap. 100-125 L

8479 18

LS 107.5 B èltek’ Lab Stirrer, 1HP Motor with chuck, ss 316 stirring shaft 12 x 550 mm Long with marine impeller 75 mm sweep. Step less autovariac speed control Cap. 120-160 L.

8479 18

HIGHSPEEDEMULSIFIERWITHDIMMERSTATAUTOVARIACSPEEDREGULATORLS 109 B èltek’ Emulsi�ier, 1/8 HP Motor with Max. Speed 5000 RPM. Stirring shaft &

emulsi�ier cup assembly ss 316. 10 mm x 225 mm long with 38mm marine impeller. Cap. 6-10 Liters.

8479 18

4


GST%

LS 109.1 B èltek’ Emulsi�ier, 1/4 HP Motor with Max. Speed 5000 RPM Cap. SS 316 contact parts.15-20 Liters

8479 18

LS 109.3 B èltek’ Emulsi�ier, 1/2 HP Motor with Max. Speed 6000 RPM. Stirring shaft & emulsi�ier cup assembly ss 316. 12 mm x 500 mm long with 65mm marine impeller. Cap. 25-35 Liters.

8479 18

LS 109.4 B èltek’ Emulsi�ier, èltek’ Emulsi�ier, 3/4 HP Motor with Max. Speed 8000 RPM. Stirring shaft & emulsi�ier cup assembly ss 316. 12 mm x 500 mm long with 65 mm marine impeller. Cap. 35-50 Liters

8479 18

LS 109.5 B èltek’ Emulsi�ier, 1 HP Motor with Max. Speed 10000 RPM. Stirring shaft & emulsi�ier cup assembly ss 316. 12 mm x 500 mm long with 65 mm marine impeller. Cap. 40-60

8479 18

LOWSPEEDGEAREDMOTORSTIRRERS

LS 110 B èltek’ Lab Stirrer, 1/20 HP Motor, Stirring shaft ss 316 10 x 250 mm long with 90 mm sweep turbine impeller. Autovariac speed regulator Max. Speed 170 RPM Cap. 3-5 KGs.

8479 18

LS 110.2 B èltek’ Lab Stirrer, 1/8 HP Motor, Stirring shaft ss 316 10 x 350 mm long with 90 mm sweep turbine impeller. Autovariac speed regulator. Max. Speed 200 RPM Cap. 8-12KGs.

8479 18

LS 111.1 B èltek’ Lab Stirrer, 1/4 HP Motor, Stirring shaft ss 316 12 x 550 mm long with 120 mm sweep turbine impeller. Autovariac speed regulator. Max. Speed 240 RPM Cap.10 -20KGs.

8479 18

LS 111.3 B èltek’ Lab Stirrer, 1/2 HP Motor, Stirring shaft ss 316 12 x 550 mm long with 120 mm sweep turbine impeller. Autovariac speed regulator Max. Speed 280 RPM Cap. 20-40 KGs.

8479 18

ACCONTINUOUSDUTYSINGLESPEEDSTIRRERS

LS 108 èltek’ Lab Stirrer, 1/12 HP Motor, stirring shaft ss 316, 10 x350 mm long with 75 mm sweep marine impeller. Constant Speed 1400 RPM. Cap. 20-30 Liters.

8479 18

LS 108.1 èltek’ Lab Stirrer, 1/8 HP Motor, stirring shaft ss 316, 10 x350 mm long with 75 mm sweep marine impeller. Constant Speed 1400 RPM cap. 30-40 Liters.

8479 18

LS 108.3 èltek’ Lab Stirrer, 1/8 HP Motor, stirring shaft ss 316, 10 x350 mm long with 75 mm sweep marine impeller. Constant Speed 2800 RPM. Cap. 25-35 Liters.

8479 18

CONTINUOUSDUTYACSINGLESPEEDGEAREDMOTORSTIRRERS.

LS 112.1 èltek’ Lab Stirrer, 1/12 HP Motor, s. s. 316 stirring shaft 10 x 350 mm long with 90 mm sweep turbine impeller. Constant speed 100 RPM. Cap. 6-10 KGs.

8479 18

LS 112.2 èltek’ Lab Stirrer, 1/12 HP Motor, s. s. 316 stirring shaft 10 x 350 mm long with 90 mm sweep turbine impeller. Constant speed 200RPM. Cap. 6-10 KGs.

8479 18

LS 114.1 èltek’ Lab Stirrer, 1/4 HP Motor, s. s. 316 stirring shaft 12 x 550 mm long with 90 mm sweep turbine impeller. Constant speed 130 RPM. Cap. 20-30 KGs.

8479 18

HEAVYDUTYACVARIABLESPEEDDRIVESTIRRERFORCONTINUOUSDUTYAPPLICATION

LS 10 F èltek’Labstirr with 1/20 HP maintenance free Brushless Induction motor and Variable Frequency Drive for speed control. Stirring shaft ss 316, 6 x250mm long with 50 mm sweep marine impeller. Cap 8 -10 Liters of Light Liquid.

8479 18

5


GST%

LS 20 F èltek’Labstirr with 1/8 HP maintenance free Brushless Induction motor and Variable Frequency Drive for speed control. Stirring shaft ss 316, 10 x 350mm long with 50 mm sweep marine impeller. Cap 16-20 Liters of Light Liquid.

8479 18

LS 40 F èltek’Labstirr with 1/4 HP maintenance free Brushless Induction motor and Variable Frequency Drive for speed control. Stirring shaft ss 316, 12 x 550mm long with 75 mm sweep marine impeller. Cap 35-40 Liters of Light Liquid.

8479 18

LS 40 HF èltek’Labstirr with 1/4 HP maintenance free Brushless Induction motor and Variable Frequency Drive for speed control. Stirring shaft ss 316, 12 x 550mm long with 75 mm sweep 3 bladed marine impeller. Speed range option: (a) 300 to 3000 RPM Cap 40-50 liters. (b) 600 to 6000 RPM. Cap 40-50 liters.

8479 18

LS 10 FP èltek’Labstirr with 1/20 HP maintenance free Brushless AC Induction motor. Micro controller with soft touch key pad for setting speed in the range of 700 to 4500 RPM, user de�inable acceleration/deceleration in the range of 40 to 510 seconds, timer 1to 99 minutes with in�inite mode, 25 program memory. LCD display of working parameters like speed, remaining time. Stirring shaft ss 316, 6 x 250 mm long with 38 mm sweep 3 bladed marine impeller. Cap 8 -10 Liters.

8479 18

LS 20 FP èltek’Labstirr with 1/8 HP maintenance free Brushless AC Induction motor. Micro controller with soft touch key pad for setting speed in the range of 700 to 4500 RPM, user de�inable acceleration/deceleration in the range of 40 to 510 seconds, timer 1to 99 minutes with in�inite mode, 25 program memory. LCD display of working parameters like speed, remaining time. Stirring shaft ss 316, 10 x 350 mm long with 50 mm sweep 3 bladed marine impeller. Cap 16-20Liters.

8479 18

LS 40 FP èltek’Labstirr with 1/4 HP maintenance free Brushless AC Induction motor. Micro controller with soft touch key pad for setting speed in the range of 700 to 4500 RPM, user de�inable acceleration/deceleration in the range of 40 to 510 seconds, timer 1to 99 minutes with in�inite mode, 25 program memory. LCD display of working parameters like speed, remaining time. Stirring shaft ss 316, 12 x 550 mm long with 75 mm sweep 3 bladed marine impeller. Cap 35-40Liters.

8479 18

LGS 20 FP èltek’Labstirr with Variable Frequency Drive, maintenance free Brushless AC Induction motor. Micro controller with soft touch key pad for setting speed in the range of 30 to 200 RPM, user de�inable acceleration/deceleration in the range of 40 to 510 seconds, timer 1to 99 minutes with in�inite mode, 25 program memory. LCD display of working parameters like speed, remaining time. Cap 15-20 Liters semi liquids.

8479 18

LGS 20 F èltek’Labstirr with 1/6 HP maintenance free Brushless Induction motor and Variable Frequency Drive for speed control. Stirring shaft 12 x 550 mm long with 90 mm sweep turbine impeller. Speed range 30 to 200 RPM. Cap 15 -20 Liters of Semi Liquids.

8479 18

LGS 40 F èltek’Labstirr with 1/4 HP maintenance free Brushless Induction motor and Variable Frequency Drive for speed control. Stirring shaft 12 x 550 mm long with 90 mm sweep turbine impeller. Speed range 30 to 200 RPM. Cap 30-40 Liters of Semi Liquids.

8479 18

SpareSpeedRegulatorsforAC/DCMotors

LVS 132 Speed regulator, mount on type for 1/20 HP AC/DC Universal Motors. 8479 18

LVS 137 Speed regulator, autovariac for 1/20, 1/12 & 1/8 HP Motors. Rating 1 Amp. 8479 18

LVS 138 Speed regulator, autovariac for 1/4, 1/3 & 1/2 HP Motors, Rating 2 Amps. 8479 18

LVS 139 Speed regulator, autovariac for 3/4 & 1 HP Motors. Rating 3 Amp s. 8479 18

6

Model Description HSN

codeGST%

DIGISTIRR-LABSTIRWITHVARIABLESPEEDPERMANENTMAGNETDCMOTORA range of Laboratory Stirrers with Permanent Magnet DC. Motors suitable for continues duty application in process laboratories and research centers. Microprocessor based control panel provided for variable speed control and working time setting. The touch button control can program the speed, working time, acceleration and deceleration time. Last used program is held in memory for repeat applications. Digital display of working speed and remaining time provided. Reversible switch for rotation on both directions offered

DS 10 èltek’DigistirrwithPMDCMotor, Digital speed control with LED Display for speed and timer range 1 to 99 minutes with in�inite mode, last used program memory, axial turbine propeller with variable speed in the range of 200 to 2000 RPM. The s. s.316 stirring shaft coupled to the drive motor with self-centering chuck. Capacity 10 Liters of light liquids.

8479 18

DS 25 èltek’DigistirrwithPMDCMotor, Digital speed control with LED Display for speed and timer range 1 to 99 minutes with in�inite mode, last used program memory, axial turbine propeller with variable speed in the range of 200 to 2000 RPM. The s. s.316 stirring shaft coupled to the drive motor with self-centering chuck. Capacity 25 Liters of light liquids.

8479 18

DS 50 èltek’DigistirrwithPMDCMotor, Digital speed control with LED Display for speed and timer range 1 to 99 minutes with in�inite mode, last used program memory, axial turbine propeller with variable speed in the range of 200 to 2000 RPM. The s. s.316 stirring shaft coupled to the drive motor with self -centering chuck. Capacity 50 Liters of light liquids.

8479 18

DGS 10 èltek’DigistirrwithPMDCMotor, Digital speed control with LED display of speed and timer 1-99 Minutes with in�inite mode, last used program memory, turbine propeller with variable speed in the range of 50 to 650 RPM. The s. s.316 stirring shaft coupled to the drive motor with self -centering chuck. Capacity 10 Liters of semi liquids or 5 KGs viscous materials.

8479 18

DGS 50 èltek’DigistirrwithPMDCMotor, Digital speed control with LED display of speed and timer 1-99 Minutes with in�inite mode, last used program memory, turbine propeller with variable speed in the range of 50 to 650 RPM. The s. s.316 stirring shaft coupled to the drive motor with self- centering chuck. Capacity 50 Liters of semi liquids or 15 KGs viscous materials

8479 18

FLUXSTIR(MOTORLESSMAGNETICSTIRRER)WITHMICROPROCESSORSUITABLEFORCONTINUESDUTYAPPLICATIONS.

FS 3 èltek’Fluxstir (Motor less Magnetic Stirrer) with stirring capacity of 50 ml to 3 Liters. The Functional features include Microprocessor basedspeed control in the range of 50 to 1200 RPM, Timer in the range of 1 to 9999 Minutes with digital LCD Display. Soft touch key pad for setting parameters. Clock Wise / Counter Clock Wise rotation selection, pulse mode setting for auto direction change.

8479 18

FSH 3 èltek’Fluxstir (Motor less Magnetic Stirrer) with hot plate, stirring capacity of 50 ml to 3 Liters. Heating capacity of up to 250°C Hot Plate surface temperature. The Functional features include Microprocessor based speed control in the range of 50 to 1200 RPM, Timer in the range of 1 to 9999 Minutes, Temperature PT 100 thermostatic control ambient to 250°C with digital LCD Display. Soft touch key pad for setting parameters. Clock Wise / Counter Clock Wise rotation selection, pulse mode setting for auto direction change.

8479 18

7


GST%

FSH3R èltek’ Fluxstir (Motor less Magnetic Stirrer) with hot plate, stirring capacity of 50 ml to 3 Liters. Heating capacity of up to 350°C Hot Plate surface temperature. The Functional features include Microprocessor based speed control in the range of 50 to 1200 RPM, Timer in the range of 1 to 9999 Minutes, Temperature PT 100 thermostatic control ambient to 350°C with digital LCD Display. Soft touch key pad for setting parameters. Clock Wise / Counter Clock Wise rotation selection, pulse mode setting for auto direction change. The unit split in to functional magnetic stirrer and separate control panel with cable connection. Facilitate keeping the stirring unit on controlled environment and the control panel away for operating convenience.

8479 18

MAGNETICSTIRRERWITHPMDCMOTOR

èltek’DIGIMAG’MAGNETICSTIRRERSWITHPMDCMOTOR,SOFTTOUCHKEYFORSETTINGSPEED,TIMER.TEMPERATURECONTROLWITHHOTPLATEMODELS.DIGITALDISPLAYOFWORKINGSPEED,REMAININGTIMEANDPERCENTATGEOFHEATINGCAPACITY.LASTUSEDPROGRAMMEMMORY.

M 2 D 2 Liters Cap. Without hot plate 8479 18

M 3 D 2 Liters. Cap with Hot Plate. 8479 18


M 5 D 5 Liters Cap. with Hot Plate. 8479 18


M11 D 10 Liters Cap. With Hot Plate. 8479 18


M 21D 20 Liters Cap. With Hot plate. 8479 18

PT 100.1 Thermostatic temperature control with PT 100 sensor for sensing Hot Plate Temperature. Suitable for M 3 D, M 5 D model of Digimag.

8479 18

PT 100.2 Thermostatic temperature control with PT 100 sensor External probe for Liquid temperature with holding stand assembly suitable for M 3 D & M 5 D models of Digimag

8479 18

MAGNETICSTIRRERSFORHIGHVOLUMEWITHSPEEDCONTROLSUITABLEFORPHARMA&BIOTHECH

MS 250 50 Liters Cap. Without hot plate 8479 18

MS 275 75Liters Cap. Without hot plate 8479 18

MS 100 100 Liters Cap. Without hot plate 8479 18

MS 200 200 Liters Capacity without hot plate. 8479 18

MULTIPOINTMAGNETICSTIRRER

MM 6 H èltek’MULTIMAG,6stationmagneticstirrerwithheating. Advanced Micro Control for programming speed in the range of 100 to 1200 RPM, Heating 1 to 100% of heater capacity and timer1 to 9999 Mts. Soft touch key pad for programming parameters like speed, time and Heating Percentage for individual stations independently. Digital LCD display of working speed of individual stirring station. The housing is made of s.s.304. Maximum Stirring 2 liters capacity per each station.

8479 18

8


GST%

MM6 èltek’MULTIMAG, 6 station magnetic stirrer with advanced Micro Control for programming speed in the range of 100 to 1200 RPM and timer 1 to 9999 Mts. Soft touch key pad for settingparameters like speed and time independently for each stirring stations. Digital LCD display of working speed of individual stirring station. The housing is made of s.s.304. Maximum Stirring 2 liters capacity per each station.

8479 18

MM 12 èltek’MULTIMAG, 12 station magnetic stirrer with advanced Micro Control for programming speed in the range of 100 to 1200 RPM and timer 1 to 9999 Mts.Soft touch keypad for program setting of speed, time independently for each stirring stations. Digital LCD display of working speed and remaining time of individual stirring station. The housing is made of s.s.304. Maximum Stirring 2 liters capacity per each station.

8479 18

ROTAMANTLE(MAGNETICSTIRRERWITHHEATINGMANTLE)WITHPMDCMOTOR,SOFTTOUCHKEYFORSETTINGSPEED,TIMER&TEMPERATURE.DIGITALDISPLAYOFWORKINGSPEED,REMAININGTIMEAND

PERCENTAGEOFHEATINGCAPACITY.LASTUSEDPROGRAMMEMORY

R 1 D èltek' Rota Mantle �itted with PMDC Motor and provided with variable speed control, digital display of speed, remaining time and temperature. Last used program memory.Cap.1 Liter. light liquid.

8479 18

R 2 D èltek" Rota Mantle �itted with PMDC Motor and provided with variable speed control, digital display of speed, remaining time and temperature. Last used program memoryCap.2 Liter. light liquid.

8479 18

R 3 D èltek" Rota Mantle �itted with PMDC Motor and provided with variable speed control, digital display of speed, remaining time and temperature. Last used program memory Cap.3 Liter. light liquid.

5479 18

R 5 D èltek" Rota Mantle �itted with PMDC Motor and provided with variable speed control, digital display of speed, remaining time and temperature. Last used program memory. Cap.5 Liter Light liquid.

8479 18

RT 100.2 Thermostatic temperature control with external PT 100 sensor for all models of Rota Mantles

8479 18

RotaMantlesforstandardsize�latbottomround�lasksupto20Literscapcanbesupplied.CallforpriceExtraStirringPaddles

MS 251 PTFE coated magnetized stirring paddle 8 mm dia.x25 mm long. 8479 18




VORTEXMIXER

VM 301 èltek’ Vortex Mixer (Quick tube Mixer) suitable for use with 15, 25, 50 & 100 ml tubes with speed control. The unit pisr oavlisdoe d with an attachment for multiple tube holder- 6x0.4 ml, 6x05. ml, 6x1.5 ml to be used as a slow speed shaker.

8479 18

9

CENTRIFUGES

MEDICO,CLINICAL,PATHOLOGICALCENTRIFUGES

MEDICOCENTRIFUGESWITHSWINGOUTROTORHEAD


GST%

TC 415 ES èltek’ Medico Centrifuge 4x15 ml capacity, Dome type with swing out rotor head.

8421 18

TC 815 S èltek’ Medico Centrifuge 8 x 15 ml capacity, with swing out rotor head. 8421 18

CLINICALCENTRIFUGESWITHFIXEDANGLEROTORHEAD

TC 815 A èltek’ Clinical Centrifuges with 8 x 15 ml capacity Angle Rotor Head. 8421 18

PATHOLOGICALCENTRIFUGESWITHFIXEDANGLEROTORHEAD

TC 245 A èltek’ Pathological Centrifuge with 24 x 5 ml (RIA) tubes capacity Angle Rotor Head.

8421 18

TC 725 A èltek’ Pathological Centrifuge Angle Rotor head to carry 60 Nos. RIA tubes (60 x 5ml)

8421 18

Mechanical Timer –60 Mts. for Medico, Clinical & Pathological centrifuges can be provided at additional Cost of Rs. 300/- each

MEDICO CENTRIFUGES with 4 tube, & 6 Tubes and CLINICAL CENTRIFUGES with 4 tubes and 6 tubes can be supplied with a minimum quantity of 10 Nos. per lot. Bulk quantity best price shall be offered.

LABSPINCENTRIFUGESWITHADVANCEDMICROCONTROLLER&STURDYANDSAFESTEELHOUSING

TC 450 D èltek’LabspinCentrifuge with Programmable Advanced Microcontroller with soft touch key pad for setting speed 500 RPM to the maximum of the rotor, operation time 1 to 99 mints, rotor selection, acceleration time Range 30 to 300 seconds. LCD Display of set and working parameters, Display of RCF Value, Safety Lid switch, Imbalance detection and safety cut off mechanism. Last used program memory. Sturdy and safe metal fabricated body with corrosion resistant epoxy coating. Max. Capacity 200 ml. Max. Speed 5000 RPM, Max. RCF 3650xg. depending on rotor heads (without Rotor Heads)

8421 18

TC 450 D ( CE

Marked)

èltek’LabspinCentrifugewith Programmable Advanced Microcontroller with soft touch key pad for setting speed 500 RPM to the maximum of the rotor, operation time 1 to 99 mints, rotor selection, acceleration time Range 30 to 300 seconds, solenoid safety lock. LCD Display of set and working parameters, Display of RCF Value, Safety Lid switch, Imbalance detection and safety cut off mechanism. Last used program memory. Sturdy and safe metal fabricated body with corrosion resistant epoxy coating. Max. Capacity 200 ml. Max. Speed 5000 RPM, Max. RCF 3650xg. depending on rotor heads (without Rotor Heads)

8421 18

InterchangeableRotorHeadsForTC450DCentrifuge

TC 451 8 x 15 ml Swing Out Rotor head, metal carrier. Max. speed 4000 RPM, RCF 2400 x g 8421 18

TC 452 8 x 15 ml Angle Rotor Head with metal carrier & polypropylene tubes. Max. speed 5000 RPM, RCF 3450 x g 8421 18

TC 453 4 x 50 ml Swing Out Rotor head with metal carrier. Max. speed 4000 RPM, RCF 2400 xg

8421 18

10


GST%

TC 454 4 x 50 ml Angle Rotor Head with metal carrier and polypropylene tubes. Max. speed 5000 RPM, RCF 3650 xg 8421 18

TC 455 12 x 15 ml Angle Rotor Head with metal carrier & polypropylene tubes. Max. speed 4000 RPM, RCF 2950 x g 8421 18

TC 456 2 Place Swing Out Head to accommodate 2 nos. PRP Tubes of sizes 15 x 106 mm, 15 x 105 mm and 16 x 130 mm tubes 8421 18

TC 457 4 Place Swing Out Head to accommodate 4 nos. PRP Special Designed NakodaTubes. 8421 18

TC 458 24 x2/1.5 ml Angle Rotor head with taper bottom Eppendorff tubes. Max. Speed 5000 RPM Max. RCF 2300xg 8421 18

ReductionAdapterssuitableforSwing-outheads(NoDiscount)

TC 471 Reduction rubber adapters to carry 1 wintrob tubes each suitable for 15 ml Carrier

8421 18

TC 472 Reduction rubber adapters to carry 3 ml tu ebaech suitable for 15 ml carrier. 8421 18

TC 473 Reduction rubber adapters to carry 5 ml RIA/ 2 m (12x82 mm), 3ml(12x82mm), 4ml(12x82mm) vacutainer tube each suitable for 15 ml carrier. Vacutainer tubes NOT offered.

8421 18

TC 474 Reduction rubber adapters to carry 8 ml glass tube, 5 ml (12x108mm),6 ml (12x108mm) Vacutainer tube each suitable for 15 ml Carrier. Vacutainer Tube NOT offered

8421 18

TC 475 Reduction rubber adapters to carry 15 ml glass tubes suitable for 50 ml Carrier.

8421 18

MULTISPINCENTRIFUGESWITHADVANCEDMICROCONTROLLER&STURDYANDSAFESTEELHOUSING

TC 650 T

`eltek’ Multispin Centrifugewith 4.3” Color TFT Touch Screen for setting speed- range 500 to the maximum for the rotor, RCF value , time -1 to 120 minutes with infinite mode, User definable acceleration and deceleration time setting in the range of 30 to 510 seconds and rotor selection with 10 program memory. LCD Color Display of set and working parameters. Maintenance free low noise brush less AC induction motor with variable Frequency drive. Safety features include electrical lid switch, Solenoid and mechanical lid lock, Gas hinges to lift and hold the lid, Imbalance detection and auto cut off in case of undue imbalance in rotor. Max. Capacity 300 ml. Max. Speed 6000 RPM, Max. RCF 3950xg. depending on rotor heads (without Rotor Heads)

8421 18

TC 650 D `eltek’MultispinCentrifuge with Programmable Advanced Microcontroller with soft touch key pad for setting speed 500 RPM to the maximum of the rotor, operation time 1 to 99 mints, rotor selection, acceleration time Range 30 to 300 seconds. LCD Display of set and working parameters, Display of RCF Value, Safety Lid switch, Imbalance detection and automatic switch off mechanism. Last used program memory. Sturdy and safe metal fabricated body with ss chamber. Max. Capacity 300 ml. Max. Speed 5500 RPM, Max. RCF 3950xg. depending on rotor heads (without Rotor Heads)

8421 18

TFT TOUCH SCREEN

11


GST%

TC 650 D (CE marked)

èltek’MultispinCentrifuge with Programmable Advanced Microcontroller with soft touch key pad for setting speed 500 RPM to the maximum of the rotor, operation time 1 to 99 mints, rotor selection, acceleration time Range 30 to 300 seconds. LCD Display of set and working parameters, Display of RCF Value, Safety Lid switch Solenoid lock, Lid with gas spring for easy operation. Imbalance detection and safety cut off mechanism. Last used program memory. Sturdy and safe metal fabricated body with ss chamber. Max. Capacity 300 ml. Max. Speed 5500 RPM, Max. RCF 3950xg. depending on rotor heads (without Rotor Heads)

8421 18

TC 650 F èltek’ Multispin Centrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive. Advance Micro controller with soft touch key pad for setting speed- range 500 to the maximum for the rotor, RCF value , time 1 to 120 minutes with infinite mode, User definable acceleration and deceleration time setting in the range of 30 to 510 seconds and rotor selection with 25 program memory. LCD Display of set and working parameters and lid switch. Solenoid safety lock, Lid with Gas spring for easy operation. Display of RPM/ RCF Value, remaining time, Imbalance detection and safety cut off mechanism. Sturdy and safe metal fabricated body with ss chamber. Max. Capacity 300 ml. Max. Speed 6000 RPM, Max. RCF 3950xg. depending on rotor heads (without Rotor Heads)

8421 18

RC 650 F

èltek’MultispinRefrigeratedCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive. Advance Micro controller with soft touch key pad for setting speed- range 500 to the maximum for the rotor, RCF value , time 1 to 120 minutes with in�inite mode, User de�inable acceleration and deceleration time setting in the range of 30 to 510 seconds , rotor selection, Temperature control in the range of -20°C to 40°C with working chamber temperature in the range of -10°C to +40°C with standby cooling and 25 program memory. LCD Display of set and working parameters and lid switch. Solenoid safety lock, Lid with Gas spring for easy operation. Display of RPM/ RCF Value, remaining time, Imbalance detection and safety cut off mechanism. Sturdy and safe metal fabricated body with ss chamber. Max. Capacity 300 ml. Max. Speed 6000 RPM, Max. RCF 3950xg. depending on rotor heads (without Rotor Heads)

8421 18

`CE’MARK:TC650FCentrifugewithCEmarkingofferedatadditionalcostRs.1000/-

Security:PasswordprotectionofparametersettingsatextracostRs.1000/-

InterchangeableRotorHeadsforallmodelsofTC650SeriesCentrifuges

TC 651 28x5 ml Swing Out Rotor Head for 5 ml RIA/2 ml (12x82 mm) 3ml (12x82 mm), 4ml (12x82mm) Vacutainer tube. Max. Speed 4500 RPM, Max. Vacutainer tubes NOT offered. RCF2800xg.( Vacutainer tube NOT offered)

8421 18

TC 652 16 x 15 ml Swing out Rotor Head with Metal carriers for 15 ml Glass tube, 9 ml (15x108 mm) Vacutainer tube. Max. Speed 4200 RPM. Max. RCF 2900 x g. Vacutainer tubes NOT offered

8421 18

TC 653 12 x 15 ml Swing out Rotor Head with Metal carriers for 15 ml Glass tube, 9 ml(15x108mm) Vacutainer Tube Max. Speed 4200 RPM. Max. RCF 2900 x g. Vacutainer Tube NOT offered.

8421 18

TC 654 8 x15 ml Swing out Rotor Head with Metal carriers and 15 ml Glass tubes. Max. Speed 4300 RPM. Max. RCF 3250 xg.

8421 18

NEW

12


GST%

TC 655 6 x50 ml Swing out Rotor Head with Metal carriers. Max. Speed 4350 RPM. Max. RCF 2950xg

8421 18

TC 656 4 x50 ml Swing out Rotor Head with Metal carriers. Max. Speed 4200 RPM. Max. RCF 3050xg

8421 18

TC 657 16 x15 ml Angle Rotor Head with Metal carriers & 15 ml polypropylene tubes. Max. Speed 5200 RPM. Max. RCF 3950 x g

8421 18

TC 658 12 x15 ml Angle Rotor Head with Metal carriers &15 ml polypropylene tubes. Max. Speed 5500 RPM. Max. RCF 3950 x g

8421 18

TC 659 8 x 15 ml Angle Rotor Head with Metal carriers & 15 ml polypropylene tubes. Max. Speed 5500 RPM. Max. RCF 2900 x g

8421 18

TC 660 6 x 50 ml Angle Rotor Head with Metal carriers & 50 mlpolypropylene tubes. Max. Speed 5100 RPM. Max. RCF 3750 x g

8421 18

TC 661 4 x 50 ml Angle Rotor Head with Metal carriers & polypropylene tubes. Max. Speed 5500 RPM. Max. RCF 3950 x g

8421 18

TC 662 24 x15 ml Angle Rotor Head with Metal carriers & 15 ml Polypropylene tubes. Max. Speed 5000 RPM. Max. RCF 3400 x g

8421 18

TC 663 36x 5ml Angle Rotor Head for 5 ml RIA or 2 ml (12x82 mm), 3ml (12x82 mm), 4ml (12x82 mm), 5ml (12x108mm) vacutainer tubes with metal carrier. Max. speed 5500 RPM, Max. RCF 3720xg (vacutainer Tubes NOT offered)

8421 18

TC 666 8 x15 ml Swing out Rotor Head with Metal carriers suitable for PRP tubes. Max. Speed 4300 RPM. Max. RCF 3250 x g.For this application of special tube, the centrifuge will be with Aluminum epoxy coated chamber.(PRP tubes not supplied)

8421 18

Reduction Adapters suitable for Swing-out heads (No Discount )

TC 671 Reduction adapter each 1 x wintrob tube for 15 ml Carrier 8421 18

TC 672 Reduction adaptor each to carry 3 ml glass tubes for 5 ml Carrier 8421 18

TC 673 Reduction adapters each 1 x 5 ml RIA Tube / 2 ml (12x82 mm),3ml (12x82 mm), 4 ml (12x82 mm) Vacutainer tubes suitable for 15 ml Carrier. (Vacutainer tube NOT offered.

8421 18

TC 674 Reduction adaptor each for 1x8 ml Glass tubes, 5 ml (12x106 mm), 6ml (12x106mm) Vacutainer Tubes for 15 ml Carrier. Vacutainer tubes NOT offered.

8421 18

TC 684 Reduction adapters each 1 x 15 ml suitable for 50 ml Carrier. 8421 18

MICROSPINCENTRIFUGESWITHADVANCEDMICROCONTROLLER&STURDYANDSAFESTEELHOUSING

TC 4815 D `eltek’Microspin Centrifuge with Programmable Advanced Microcontroller with soft touch key pad for setting speed 500 RPM to the maximum of the rotor, operation time 1 to 99 mints, rotor selection, acceleration time Range 30 to 300 seconds. LCD Display of set and working parameters, Display of RCF Value, Safety Lid switch, Imbalance detection and safety cut off mechanism. Last used program memory. Sturdy and safe metal fabricated body. Max. Capacity 48 ml. Max. Speed 16000 RPM, Max. RCF 17600 xg. depending on rotor heads (without Rotor Heads)

8421 18

13


GST%

TC 4815 D (WITH

CE)

`eltek’Microspin Centrifuge with Programmable Advanced Microcontroller with soft touch key pad for setting speed 500 RPM to the maximum of the rotor, operation time 1 to 99 mints, rotor selection, acceleration time Range 30 to 300 seconds. LCD Display of set and working parameters, Display of RCF Value, Safety Lid switch Solenoid lock, Lid with gas spring for easy operation. Imbalance detection and automatic switch off mechanism. Last used program memory. Sturdy and safe metal fabricated body. Max. Capacity 48 ml. Max. Speed 16000 RPM, Max. RCF 17600 x g. depending on rotor heads (without Rotor Heads)

8421 18

TC 4815 F `eltek’Microspin Centrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive. Advance Micro controller with soft touch key pad for setting speed- range 500 to the maximum for the rotor, RCF value , time 1 to 120 minutes with in�inite mode, User de�inable acceleration and deceleration time setting in the range of 30 to 510 seconds and rotor selection with 25 program memory. LCD Display of set and working parameters and lid switch. Solenoid safety lock, Lid with Gas spring for easy operation. Display of RPM/ RCF Value, remaining time, Imbalance detection and safety cut off mechanism. Sturdy and safe metal fabricated body. Max. Capacity 48 ml. Max. Speed 16000 RPM, Max. RCF 17600 x g. depending on rotor heads (price without Rotor Heads)

8421 18

TC4815FCentrifugewithCEmarkingofferedatadditionalcostRs.1000/

Security:PasswordprotectionofparametersettingsatextracostRs.1000/-

InterchangeableRotorHeadsforallmodelsofTC4815Microspincentrifuges

TC 481 24 x2/1.5 ml Angle Rotor head with taper bottom Eppendorff tubes. Max. Speed12000 RPM Max. RCF13500 x

8421 18

TC 482 24x PCR Tubes Angle rotor head. Max. Speed 12000 RPM Max. RCF 9800 x g 8421 18

TC 483 30 x 0.4 ml Angle Rotor head with taper bottom Eppendorff tubes. Max. Speed 12000 RPM Max. RCF 12300 x g

8421 18

TC 484 16 x 1 ml Angle Rotor head with taper bottom Eppendorff tubes. Max. Speed 12000 RPM Max. RCF 11700 x g

8421 18

TC 485 8 x 3 ml Angle Rotor head with taper bottom Eppendorff tubes. Max. Speed 12000 RPM Max. RCF 12500x g

8421 18

TC 486 6 x 5 ml Angle Rotor head with round bottom polypropylene tubes. Max. Speed 12000 RPM Max. RCF 11700 x g

8421 18

TC 487 8 x 5 ml Angle Rotor head with round bottom polypropylene tubes. Max. Speed 12000 RPM Max. RCF 11700 x g

8421 18

TC 491 10 x 1 ml Angle Rotor head with round bottom glass tubes. Max. Speed 16000 RPM Max. RCF 17500 x g

8421 18

TC 492 12 x 0.5 ml Angle Rotor head with round bottom glass tubes. Max. Speed 16000 RPM Max. RCF 17500 x g

8421 18

TC 495 Micro Haematocrite Rotor. Max. Speed 12000 RPM Max. RCF 15500 x g 8421 18

TC 495 R Reading Device for TC 495. 8421 18

14


GST%

TC 496 Micro Haematocrite Rotor 12xQBC-II plus system. Max. Speed 12000 RPM Max. RCF 15500xg

8421 18

TC 497 Angle Rotor Head for 4 strips of 8x2 ml PCR strips. Max. Speed 12000 RPM. Max. RCF 11910xg (without PCR strips.)

8421 18

AngleRotorHeadsforstandardmicrotubesofdifferencesizesandcapacitiescanbedesignedmanufactured.

REFRIGERATEDMICROSPINCENTRIFUGES

RC 4815 F `eltek’RefrigeratedMicrospin Centrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive. Advanced Microcontroller with soft touch key pad for setting speed- 500 to maximum rotor head speed, RCF Value, Temperature in the range of -10°C to +40°C, timer 1 to 120 minutes with in�inite mode, User de�inable acceleration and deceleration time setting in the range of 30 to 510 seconds and rotor selection with 25 program memories. LCD Display of working parameters. Lid switch & Solenoid safety lock, Display of RPM/ RCF Value, remaining time, Imbalance detection safety cut off mechanism. CFC Free cooling with pre cooling and stand by cooling facility. Lid with Gas Spring for easy operation. Sturdy and safe metal fabricated body with ss chamber. Max. Capacity 48 ml. Max. Speed 16000 RPM, Max. RCF 17600 x g. depending on rotor heads(price without Rotor Heads)

8421 18

Security Password Protection for parameter program settings offered at extra cost 8421 18

CE Mark RC 4815 F Centrifuge with CE marking offered at additional cost. 8421 18

Packing Packing charge for RC 4815 F models of Refrigerated Centrifuges 8421 18

Installation Prepaid installation and demonstration by our authorized service engineer is highly recommended and is a precondition for free service during the guarantee period.

9987 18

Use of Servo controlled voltage stabilizer is highly recommended and is a pre-condition for free service during guarantee period. Capacity recommended: 1kVA. Stabilizers are not supplied by us and are to be procured by the user separately.

MP 300 R ‘eltek’RefrigeratedMicroCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive, Advanced Microcontroller with soft touch key pad for setting Speed- 500 to maximum of rotor head speed, RCF Value, Rotor selection, Timer in the range 1 to 120 minutes with in�inite mode, Temperature in the range of -10°C to +40°C, and 25 program memory. LCD Display of working parameters and solenoid safety lock. The centrifuge is also provided with imbalance indication & safety cut off mechanism, Rotor in motion indication, safe lid open indication when rotor is static after the spin, working RCF reading, user de�inable acceleration and deceleration time setting in the range 30 to 510 seconds. CFC Free Refrigeration with Pre cooling and stand by cooling facility. Sturdy and safe metal fabricated body with ss chamber. Lid with Gas Spring for easy operation Max. Capacity 32 ml. Max. Speed 16000 RPM, Max. RCF 17600xg. (price without Rotor Heads)

8421 18


CE Mark MP 300 R Centrifuge with CE marking offered at additional cost 8421 18

Packing Packing charge for MP 300 R models of Refrigerated Centrifuges. 8421 18


9987 18

15


RotorHeadsforusewithRC4815FandMP300RCentrifuges


GST%

TC 481 R 24 x 2/1.5 ml Angle Rotor head with taper bottom Eppendorff tubes. Max. Speed 12000 RPM Max.RCF13500xg

8421 18

TC 482 R 24x PCR Tubes Angle rotor head. Max. Speed 12000 RPM Max. RCF 9800 x g 8421 18

TC 483 R 30 x 0.4 ml Angle Rotor head with taper bottom Eppendorff tubes. Max. Speed 12000 RPM Max. RCF 12300 x g

8421 18

TC 484 R 16 x 1 ml Angle Rotor head with taper bottom Eppendorff tubes. Max. Speed 12000 RPM Max. RCF 11700 x g

8421 18

TC 485 R 8 x 3 ml Angle Rotor head with taper bottom Eppendorff tubes. Max. Speed 12000 RPM Max. RCF 12500 x g

8421 18

TC 486 R 6 x 5 ml Angle Rotor head with round bottom polypropylene tubes. Max. Speed 12000 RPM Max. RCF 11700 x g

8421 18

TC 491 R 10 x 1 ml Angle Rotor head with round bottom glass tubes. Max. Speed 16000 RPM Max. RCF 17500 x g

8421 18

TC 492 R 12 x 0.5 ml Angle Rotor head with round bottom glass tubes. Max. Speed 16000 RPM Max. RCF 17500 x g

8421 18

TC 497 R Angle Rotor Head for 4 strips of 8x2 ml PCR strips. Max. Speed 12000 RPM. Max. RCF 11910xg (without PCR strips.)

8421 18

LOWSPEEDRESEARCHCENTRIFUGESWITHMICROCONTROLLER(TableTopModels)

TC 8100 F `eltek’ResearchCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive. Advance Micro controller with soft touch key pad for setting speed- range 500 to the maximum for the rotor, speed setting by RCF value , time 1 to 120 minutes with in�inite mode, User de�inable acceleration and deceleration time setting in the range of 12 to 610 seconds and rotor selection with 25 program memory. LCD Display of working parameters and lid switch. Solenoid safety lock, Lid with Gas spring for easy operation and hold. Display of RPM/ RCF Value, remaining time, Imbalance detection and safety cut off mechanism. Sturdy and safe metal fabricated body. Max. Capacity 1200 ml. Max. Speed 10000 RPM, Max. RCF 10500xg. depending on rotor heads (price without Rotor Heads)

8421 18


CE Mark TC 8100 F Centrifuge with CE marking offered at additional cost 8421 18

Packing Wooden Box packing charges for TC 8100 F Centrifuge 8421 18


9987 18

Use of Servo controlled voltage stabilizer is highly recommended and is a pre-condition for free service during guarantee period. Capacity recommended: 1kVA. Stabilizers are not supplied by us and are to be procured by the user separately

16


GST%

MP 800 ‘eltek’ResearchCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive, Advanced Microcontroller with soft touch key pad for setting Speed- 500 to maximum of rotor head speed , RCF Value , Rotor selection, Timer in the range 1 to 120 minutes with in�inite mode, and 99 program memory. LCD Display of working parameters and solenoid safety lock. The centrifuge is also provided with imbalance indication & safety cut off mechanism, Rotor in motion indication, safe lid open indication when rotor is static after the spin, working RCF reading, user de�inable acceleration and deceleration time setting in the range 12 to 610 seconds. Sturdy and safe metal fabricated body. Lid with Gas Spring for easy operation. Max. Capacity 1200 ml. Max. Speed 10000 RPM, Max. RCF 10500xg.(price without Rotor Heads)

8421 18

CE Mark MP 800 Centrifuge with CE marking offered at additional cost 8421 18

Packing Wooden Box packing charges for MP 800 Centrifuge 8421 18

Installation Prepaid installation and demonstration by our authorized service engineer is highly recommended and is a precondition for free service during the guarantee period..

9987 18


TC 8100 D `eltek’LowSpeedResearchCentrifuge with Programmable Advanced Microcontroller with soft touch key pad for setting speed 500 RPM to the maximum of the rotor, operation time 1 to 99 mints, rotor selection, acceleration time Range 30 to 300 seconds. LCD Display of set and working parameters, Display of RCF Value, safety cut off mechanism Solenoid lock, Lid with gas spring for easy operation. Imbalance detection and automatic switch off Last used program memory. Sturdy and safe metal fabricated body. Max. Capacity 1200 ml. Max. Speed 7000 RPM, Max. RCF 7250 x g. depending on rotor heads (price without Rotor Heads)

8421 18

Packing Wooden Box packing charges for TC 8100 D Centrifuge 8421 18


9987 18


REFRIGERATEDRESEARCHLOWSPEEDCENTRIFUGE

RC 8100 F eltek’LowSpeedRefrigeratedResearchCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive. Advanced Microcontroller with soft touch key pad for setting speed- 500 to maximum rotor head speed, RCF Value, Temperature in the range of -10°C to +40°C Timer 1 to 120 minutes with in�inite mode, User de�inable acceleration and deceleration time setting in the range of 30 to 510 seconds and rotor selection with 25 program memories. LCD Display of working parameters. Lid switch & Solenoid safety lock, Display of RPM/ RCF Value, remaining time, Imbalance detection and safety cut off mechanism. CFC Free cooling with pre cooling and stand by cooling facility. Lid with Gas Spring for easy operation. Sturdy and safe metal fabricated body with ss chamber. Max. Capacity 1200 ml. Max. Speed 10000 RPM, Max. RCF 10500 x g. depending on rotor heads (price without Rotor Heads)

8421 18

17


GST%


CE MARK RC 8100 F Centrifuge with CE marking offered at additional cost 8421 18

Packing Wooden Box Packing charge for RC 8100 F models of Refrigerated Centrifuges 8421 18


9987 18

MP 800 R ‘eltek’LowSpedRefrigeratedResearchCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive, Advanced Microcontroller with soft touch key pad for setting Speed- 500 to maximum of rotor head speed, RCF Value, Rotor selection, Timer in the range 1 to 120 minutes with in�inite mode, Temperature in the range of -10°C to +40°C, and 25 program memory. LCD Display of working parameters and solenoid safety lock. The centrifuge is also provided with imbalance indication & safety cut off mechanism, Rotor in motion indication, safe lid open indication when rotor is static after the spin, working RCF reading, user de�inable acceleration and deceleration time setting in the range 30 to 510 seconds. CFC Free Refrigeration with Pre cooling and stand by cooling facility. Sturdy and safe metal fabricated body with ss chamber. Lid with Gas Spring for easy operation. Max. Capacity 1200 ml. Max. Speed 10000 RPM, Max. RCF 10500xg. (price without Rotor Heads)

8421 18

Security Password protection offered at extra cost 8421 18

CE MARK MP 800 R Centrifuge with CE marking offered at additional cost 8421 18



9987 18


MP 800 RS eltek’RefrigeratedResearchCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive, Advanced Microcontroller with soft touch key pad for setting Speed- 500 to maximum of rotor head speed, RCF Value, Rotor selection, Timer in the range 1 to 120 minutes with in�inite mode, Temperature in the range of -10°C to +40°C, and 25 program memory. LCD Display of working parameters and solenoid safety lock. The centrifuge is also provided with imbalance indication & safety cut off mechanism, Rotor in motion indication, safe lid open indication when rotor is static after the spin, working RCF reading, user de�inable acceleration and deceleration time setting in the range 30 to 510 seconds. CFC Free Refrigeration with Pre cooling and stand by cooling facility. Sturdy and safe metal fabricated body with ss chamber. Lid with Gas Spring for easy operation. Max. Capacity 1200 ml. Max. Speed 18000 RPM, Max. RCF 28600xg. (price without Rotor Heads)

8421 18


CE MARK MP 800 RS Centrifuge with CE marking offered at additional cost 8421 18



9987 18

18



GST%

RC 8100 SF `eltek’RefrigeratedResearchCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive. Advanced Microcontroller with soft touch key pad for setting speed- 500 to maximum rotor head speed, RCF Value, Temperature in the range of -10°C to +40°C Timer 1 to 120 minutes with in�inite mode, User de�inable acceleration and deceleration time setting in the range of 30 to 510 seconds and rotor selection with 25 program memories. LCD Display of working parameters. Lid switch & Solenoid safety lock, Display of RPM/ RCF Value, remaining time, Imbalance detection and safety cut off mechanism. CFC Free cooling with pre cooling and stand by cooling facility. Lid with Gas Spring for easy operation. Sturdy and safe metal fabricated body with ss chamber. Max. Capacity 1200 ml. Max. Speed 18000 RPM, Max. RCF 28600xg. depending on rotor heads (price without Rotor Heads)

8421 18


CE MARK RC 8100 SF Centrifuge with CE marking offered at additional cost 8421 18



9987 18


InterchangeableRotorheadsforTC8100D,TC8100F,MP800,andRC8100F,MP800R&RC8100SFCentrifuges.

Note: All Rotor heads of TC 4100 & RC 4100 can be used with TC 8100, RC 8100, MP 800 and MP 800 R. at Maximum Speed of Centrifuge.

TC 8101 4 place swing out rotor head Suitable for TC 8101 A/B/C/V/VL/G/J carriers 8421 18

TC 8101 A 4 Metal carriers each 1 x 200 ml capacity with rubber cushions. Max. Speed 5200 RPM. Max. RCF5050 x g 8421 18

TC 8101 B 4 Metal carriers each 1 x 100ml capacity with rubber cushions. Max. Speed 6100 RPM. Max. RCF6600 x g 8421 18

TC 8101 C 4 Metal carriers each 1 x 18 RIA (5 ml) tubes capacity with rubber cushions. Max. Speed 5200 RPM. Max. RCF4200 x g

8421 18

TC 8101 V 4 Metal carriers each 1 x 9 Vacutainer tubes of 2, 3, 4 ml (12x82 mm) cap. Max. Speed 5200 RPM. Max. RCF4200 x g

8421 18

TC 8101VL 4 Metal carriers each 1x 9 Vacutainer tubes of 5 ml, 6 ml cap. Max. Speed 5200 RPM. Max. RCF4200 x g

8421 18

TC 8101 J 4 metal carriers each of 4 x 15 ml capacity suitable for use with TC 8101 Rotor head. Max. Speed 4500 RPM. Max. RCF2780 x g

8421 18

TC 8101 G 4 metal carriers each of 3 x 15 ml capacity suitable for use with TC 8101 Rotor head. Max. Speed 4500 RPM. Max. RCF2780 x g

8421 18

TC 8101 D 4 Place Swing out Rotor Head suitable for TC 8101 E & I 8421 18

TC 8101 E 4 Metal carriers suitable for TC 8101 D rotor head each to carry 27Nos.RIA 5ml) tubes, 2ml, 3ml, 4 ml Vacutainer tubes (12x82 mm). Max. Speed 5200 RPM. Max. RCF4200 x g. Vacutainer tubes NOT offered.

8421 18

19


GST%

TC 8101 F 4 Metal carriers suitable for TC 8101 D rotor head each to carry 21 Nos. 2ml/3ml/5ml Vacutainer tubes (size of the tubes 12.5mm dia 82mm long ) Max. Speed 5200 RPM. Max. RCF4200 x g.

8421 18

TC 8101 I 4 Metal carriers each 15 x 6 ml Vacutainer tubes capacity for use with TC 8101 D. Max. Speed 5200 RPM. Max. RCF4200 x g

8421 18

TC 8109 4 Place Swing out Rotor Head with metal carrier & 250 ml polypropylene bottles. Max. Speed 5200 RPM. Max. RCF5050 x g

8421 18

TC 8110 4 x 250 ml Angle Rotor Head with lid and polypropylene bottles. Max. Speed 7000 RPM. Max. RCF7250 x g

8421 18

TC 8102 12 x 25 ml Angle Rotor Head with lid and polypropylene tubes. Max. Speed 7000 RPM. Max. RCF7100 x g

8421 18

TC 8103 6 x 200 ml Angle Rotor Head with lid and polypropylene bottles. Max. Speed 7000 RPM. Max. RCF7250 x g

8421 18


8421 18


8421 18


8421 18

TC 4115 F 18x15 ml Angle Rotor Head with lid and polypropylene tubes. Max. Speed 10000 RPM. Max. RCF10500 x g

8421 18

TC 4111 F 24 x 2 ml / 1.5 ml Angle Rotor Head with lid and Eppendorff tubes. Max. Speed 10000 RPM. Max. RCF10500 x g

8421 18

TC 4118 F 24 x 3/4 ml Vacutainer tubes Angle Rotor Head epoxy coating. Max. Speed 7000 RPM. Max. RCF5000 x g

8421 18

TC 4118 D 24 x 3/4 ml Vacutainer tubes Angle Rotor Head epoxy coating. Max. Speed 5000 RPM. Max. RCF5000 x g. Vacutainer tubes NOT offered.

8421 18

TC 4119 D/F

36 x 6ml/5ml/3ml Vacutainer tubes Angle Rotor Head with lid and polypropylene tubes. Max. Speed 7000 RPM. Max. RCF7100 x g

8421 18

TC 8107 2 Place Swing out Rotor Head to carry 2 Nos. Micro titer trays, size 85 mm x 127 mm complete with 2 Nos. Metal carriers, but without Micro titer trays. Max. Speed 3400 RPM. Max. RCF1700 x g

8421 18

TC 8108 2 Place Swing our Rotor Head to carry 4 Nos. Micro titer trays each, size 85mm x 127 mm complete with 2 Nos. metal carries, but without micro titer trays. Max. Speed 3400 RPM. Max. RCF1700 x g

8421 18

ReductionadaptorssuitableforResearchCentrifuges

TC 8111 Set of 4 reduction adapters to carry 4 Nos.100 ml glass tubes, suitable for 200ml carriers.

8421 18

TC 8112 Set of 4 reduction adapters to carry 4 Nos.50 ml glass tubes, for 200 ml carriers

8421 18

TC 8113 Set of 4 reduction adapters to carry 3 x 30 ml glass tubes, for 200 ml. carriers 8421 18

TC 8114 Set of 4 reduction adapters to carry 7 x 15 ml glass tubes, 5 ml, 6 ml vacutainer (12x108 mm), for 200 ml carriers. Vacutainer tubes NOT offered.

8421 18

20


GST%

TC 8115 Set of 4 reduction adapters to carry 1 x 50 ml glass tubes, for 100 ml carriers 8421 18

TC 8116 Set of 4 reduction adapters to carry 1 x 25 ml glass tubes, for 100 ml carriers 8421 18

TC 8117 Set of 4 reduction adapters to carry 13 x 5ml glass tubes, suitable for 200ml carriers.

8421 18

TC 8118 Set of 4 reduction adaptors to carry 3x15 ml glass tubes, 5ml, 6ml Vacutainer Tubes (12x108mm)for 100 ml carriers. Vacutainer tubes NOT offered.

8421 18

TC 8119 Set of 4 reduction adaptors to carry 6 Vacutainer tubes of 4 ml capacity 8421 18

TC 8120 Set of 4 reduction adaptors to carry 5 Vacutainer tubes of 10 ml capacity 8421 18

TC 8121 Set of 4 reduction adaptors to carry 1 x 50 ml glass tubes, for 250 ml carriers 8421 18

TC 8122 Set of 4 reduction adaptors to carry 3 x 25 ml glass tubes, for 250 ml carriers 8421 18

TC 8123 Set of 4 reduction adaptors to carry 3 x 15 ml glass /P.Pt. ubes, for 250 ml carriers

8421 18

TC 8124 Set of 4 reduction adaptors to carry 13 x 5 ml glass / P.P.tubes, for 250 ml carriers

8421 18

HIGHSPEEDRESEARCHCENTRIFUGESWITHMICRCONTROLLER(TableTopModels)

TC 4100 F `eltek’HighSpedResearchCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive Advance Micro controller with soft touch key pad for setting speed- range 500 to the maximum for the rotor, RCF value, time 1 to 120 minutes with in�inite mode, User de�inable acceleration and deceleration time setting in the range of 30 to 510 seconds and rotor selection with 25 program memory. LCD Display of working parameters and lid switch. Solenoid safety lock, Lid with Gas spring for easy operation. Display of RPM/ RCF Value, remaining time, Imbalance detection and safety cut off mechanism. Sturdy and safe metal fabricated body. Max. Capacity 400 ml. Max. Speed 20000 RPM, Max. RCF 34500xg. depending on rotor heads (price without Rotor Heads)

8421 18


CE MARK TC 4100 F Centrifuge with CE marking offered at additional cost 8421 18

Packing Wooden Box Packing charge for TC4100 F models of Refrigerated Centrifuges 8421 18


9987 18


MP 400 ‘eltek’HighSpeedResearchCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive, Advanced Microcontroller with soft touch key pad for setting Speed- 500 to maximum of rotor head speed , RCF Value , Rotor selection, Timer in the range 1 to 120 minutes with in�inite mode, and 25 program memory. LCD Display of working parameters and solenoid safety lock. The centrifuge is also provided with imbalance indication & safety cut off mechanism, Rotor in motion indication, safe lid open indication when rotor is static after the spin, working RCF reading, user de�inable acceleration and deceleration time setting in the range 30 to 510 seconds. Sturdy and safe metal fabricated body. Lid with Gas Spring for easy operation. Max. Capacity 400 ml. Max. Speed 20000 RPM, Max. RCF 34500xg. (price without Rotor Heads)

8421 18

21


GST%


CE MARK MP 400 Centrifuge with CE marking offered at additional cost 8421 18

Packing Wooden Box Packing charge for MP 400 models of Refrigerated Centrifuges 8421 18


9987 18


TC 4100 D `eltek’HighSpeedResearchCentrifuge with Programmable Advanced Microcontroller with soft touch key pad for setting speed 500 RPM to the maximum of the rotor, operation time 1 to 99 mints, rotor selection, acceleration time range 30 to 300 seconds. LCD Display of set and working parameters, Display of RCF Value, Safety Lid switch Solenoid lock, Lid with gas spring for easy operation. Imbalance detection and safety cut off mechanism. Last used program memory. Sturdy and safe metal fabricated body. Max. Capacity 400 ml. Max. Speed 17500 RPM, Max.RCF 27500 x g. depending on rotor heads (price without Rotor Heads)

8421 18

Packing Wooden Box Packing charge for TC 4100 D models of Refrigerated Centrifuges 8421 18


9987 18


HIGHSPEEDREFRIGERATEDRESEARCHCENTRIFUGEWITHMICROCONTROLLER(TableTopModel)

RC 4100 F `eltek’HighSpeedRefrigeratedResearchCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive. Advanced Microcontroller with soft touch key pad for setting speed- 500 to maximum rotor head speed, RCF Value, Temperature in the range of -10°C to +40°C Timer 1 to 120 minutes with in�inite mode, User de�inable acceleration and deceleration time setting in the range of 30 to 510 seconds and rotor selection with 25 program memories. LCD Display of working parameters. Lid switch & Solenoid safety lock, Display of RPM/ RCF Value, remaining time, Imbalance detection and safety cut off mechanism. CFC Free cooling with pre cooling and stand by cooling facility. Lid with Gas Spring for easy operation. Sturdy and safe metal fabricated body with ss chamber. Max. Capacity 400 ml. Max. Speed 20000 RPM, Max. RCF 34500 x g. depending on rotor heads (price without Rotor Heads)

8421 18


CE MARK MP 400 Centrifuge with CE marking offered at additional cost 8421 18



9987 18


22


GST%

MP 400 R ‘eltek’HighSpedRefrigeratedResearchCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive, Advanced Microcontroller with soft touch key pad for setting Speed- 500 to maximum of rotor head speed, RCF Value, Rotor selection, Timer in the range 1 to 120 minutes with in�inite mode, Temperature in the range of -10°C to +40°C, and 25 program memory. LCD Display of working parameters and solenoid safety lock. The centrifuge is also provided with imbalance indication & safety cut off mechanism, Rotor in motion indication, safe lid open indication when rotor is static after the spin, working RCF reading, user de�inable acceleration and deceleration time setting in the range 30 to 510 seconds. CFC Free Refrigeration with Pre cooling and stand by cooling facility. Sturdy and safe metal fabricated body with ss chamber. Lid with Gas Spring for easy operation. Max. Capacity 400 ml. Max. Speed 20000 RPM, Max. RCF 34500xg. (price without Rotor Heads)

8421 18


CE MARK MP 400 R Centrifuge with CE marking offered at additional cost 8421 18

Packing Wooden Box Packing charge for MP 400 R models of Refrigerated Centrifuges 8421 18


9987 18


InterchangeableRotorHeadsSuitableforTC4100F,TC4100D,MP400,RC4100F&MP400RCentrifuges

TC 4101 4 x 100 ml Angle Rotor with lid, polypropylene tubes. Max. Speed 14000 RPM. Max. RCF 22100 x g

8421 18


8421 18


8421 18


8421 18

TC 4105 8x 25 ml Angle Rotor with lid, polypropylene tubes. Max. Speed 15000 RPM. Max. RCF 24000 x g

8421 18


8421 18

TC 4107 12 x 15ml Angle Rotor with lid, polypropylene tubes. Max. Speed 15000 RPM. Max. RCF 23670 x g

8421 18


8421 18


8421 18

TC 4110 4 x 10 ml Swing out Rotor with, Carriers rubber cushions & glass tubes. Max. Speed 12500 RPM. Max.RCF 16100 x g

8421 18

23


GST%

TC 4111 24 x 2 /1.5 ml Angle Rotor with lid, Eppendorff tubes. Max. Speed 20000 RPM. Max. RCF 30500 x g

8421 18

TC 4113 24 x 0.5 ml Angle Rotor with lid, Eppendorff tubes. Max. Speed 20000 RPM. Max. RCF 29000 x g

8421 18

TC 4114 4 x 25 ml Swing out Rotor with carriers, rubber cushions & glass tubes. Max. Speed 12000 RPM. Max. RCF 16000 x g

8421 18

TC 4115 18 x 15 ml Angle Rotor Head with lid and 18 Nos. Polypropylene tubes. Max. Speed 12000 RPM. Max. RCF 17600 x g

8421 18

TC 4116 192 x 0.5 ml Angle Rotor Head with lid & Eppendorff tubes. Max. Speed 14000 RPM. Max. RCF 24600xg

8421 18

TC 4117 48 x 2 / 1.5 ml Angle Rotor Head with lid and, Eppendorff tubes. Max. Speed 15000 RPM. Max. RCF 22100 x g

8421 18

TC 4118 24 x 3/4 ml Vacutainer tubes Angle Rotor Head without tubes. Max. Speed 10000 RPM. Max. RCF 10400 x g. Vacutainer Tubes NOT offered.

8421 18

TC 4119 4 Strip of 8 x 0.2ml Angle Rotor Head with Max. Speed of 11000 RPM. Max. RCF 12180xg

8421 18

TC 4120 6 Strip of 8 x 0.2ml Angle Rotor Head with Max. Speed of 11000 RPM. Max. RCF 12180xg

8421 18

RotorHeadstosuitspeci�icapplicationscanbedesignedandmanufactured.PricesonRequest.

OILTESTINGCENTRIFUGESWITHMICROCONTROLLER(FloorModel)

SC 6100 M ‘eltek’OilTestingCentrifugewith maintenance free Brush Less Induction Motor and Variable Frequency Drive, Advanced Microcontroller with soft touch key pad for setting Speed- 500 to 3000 RPM , RCF Value , Rotor selection, Timer in the range 1 to 120 minutes with in�inite mode, and 25 program memory. LCD Display of working parameters and solenoid safety lock. The centrifuge is also provided with imbalance indication & safety cut off mechanism, Rotor in motion indication, safe lid open indication when rotor is static after the spin, working RCF reading, user de�inable acceleration and deceleration time setting in the range 30 to 510 seconds. Sturdy and safe metal fabricated body with isolated chamber. Lid with Gas Spring for easy operation. Max. Capacity 600 ml. Max. Speed 3000 RPM, Max. RCF 1760xg. (price without Rotor Heads)

8421 18

Packing Wooden Box Packing charge for SC 6100 M models of Refrigerated Centrifuges

8421 18


9987 18

InterchangeableRotorHeadsuitableforSC6100Mcentrifuge

SC 6 P 6 Place Swing Out Rotor Head (without carriers) suitable for pear shaped glass tubes

8421 18

SC 6102 Set of 6 Metal carrier suitable for SC 6101 head to carry pear shaped tubes. Max. Speed 3000 RPM. Max. RCF 1760 x g

8421 18

24


GST%

SC 6103 Set of 6 pear shaped tubes 100 ml cap. For SC 6102 carriers for ASTM D-96-6 8tests

8421 18

SC 6 T 6 Place Swing Out Rotor Head (without carriers) suitable for Taper bottom glass tubes, Babcock bottles and sulfonation �lasks. Max. Speed 3000 RPM. Max. RCF 1760 x g

8421 18

SC 6104 Set of 6 Metal carriers for SC 6101 head to carry tapered bottom tubes of 100 ml Cap.

8421 18

SC 6105 Set of 6 tapered bottom tubes of 100 ml cap. 200 mm long for SC 6104 carrier. 8421 18

SC 6106 Set of 6 sulfonation �lasks, std. Babcock bottle 225 mm long for SC 6104 Carrier for ASTM D-483-61T test.

8421 18

SC 6107 Set of 6 modi�ied Babcock bottles 200 mm long for SC 6104 carrier for ASTMD 184-52, ASTM D-1019-68 & IP-145-55 tests.

8421 18

SC 6108 Set of 6 rubber cushions for tapered bottom tubes. 8421 18

SC 6109 Set of 6 rubber cushions for Babcock bottle. 8421 18

SC 6110 Set of 6 rubber cushions for pear shaped tubes. 8421 18

Prepaid installation and demonstration by our authorized service engineer is highly recommended and is a precondition for free service during the guarantee period. Charges on request.

OILTESTINGCENTRIFUGEWITHMICROCONTROLLER-TABLETOPMODEL

OC 2F `eltek’OilTestingCentrifuge with maintenance free Brush Less Induction Motor and Variable Frequency Drive Advance Micro controller with soft touch key pad for setting speed- range 500 to 3000 RPM, RCF value, time 1 to 120 minutes with in�inite mode, User de�inable acceleration and deceleration time setting in the range of 30 to 510 seconds and rotor selection with 25 program memory. LCD Display of working parameters and lid switch. Solenoid safety lock, Lid with Gas spring for easy operation. Display of RPM/ RCF Value, remaining time, Imbalance detection and safety cut off mechanism. Sturdy and safe metal fabricated body with isolated chamber. Max. Capacity 400 ml. Max. Speed 3000 RPM, Max. RCF 1480xg. depending on rotor heads (price without Rotor Heads)

8421 18

Packing Wooden Box Packing charge for OC 2 F models of Refrigerated Centrifuges 8421 18


9987 18


InterchangeableRotorHeadsuitableforOC2Fcentrifuge

OC 1 P 4 Place Swing Out Rotor Head suitable for 100 ml Pear shaped carriers (without carriers) Max. Speed 3000 RPM. Max. RCF 1480 x g.

8421 18

SC 2002 Set of 4 Metal carriers with rubber cushion for SC 2001 Rotor Head to carry pear shaped tubes

8421 18

SC 2003 Set of 4 pear shaped glass tubes, 100 ml cap. Suitable for ASTM 96-68 Tests 8421 18

25


GST%

OC 1 T 4 Place Swing Out Rotor Head (without carriers) suitable for Taper bottom glass tubes, Babcock bottles and sulfonation �lasks. Max. Speed 3000 RPM. Max. RCF 1480xg.

8421 18

SC 2004 Set of 4 Metal carriers suitable for SC 2001 Rotor Head to carry 165 mm long tapered bottom centrifuge tubes

8421 18

SC 2005 Set of 4 tapered bottom centrifuge tubes 165 mm long with 100 ml cap. for SC 2004 carriers for ASTM D-91-61, ASTM D-96-68, ASTM D-1796-60T, D-893-60T & I.P.75-57 tests

8421 18

SC 2006 Set of 4 Sulfonation �lasks, standard Babcock bottles suitable for SC 2004 carriers for ASTM D-483-61T tests.

8421 18

SC 2007 Set of 4 modi�ied Babcock bottles suitable for SC 2004 carriers for ASTM D-484-52, ASTM D-1019-60T & IP-145-55 tests

8421 18

SC 2008 Set of 4 rubber cushions for tapered bottom tubes. 8421 18

SC 2009 Set of 4 rubber cushions for Babcock bottles. 8421 18

SC 2010 Set of 4 rubber cushions for pear shaped tubes. 8421 18

Prepaid installation and demonstration by our authorized service engineer is highly recommended and is a precondition for free service during the guarantee period. Charges on request.

HIGHVOLUMEREFRIGERATEDCENTRIFUGEWITHMICROCONTROLLER(FORPHARMA&BIOTECHAPPLICATION)

MP 6 K ‘eltek’HighVolumeRefrigeratedCentrifuge, Floor Model with maintenance free Brush Less Induction Motor and Variable Frequency Drive, Advanced Microcontroller with soft touch key pad for setting Speed- 500 to maximum of rotor head speed, RCF Value, Rotor selection, Timer in the range 1 to 120 minutes with in�inite mode, Temperature in the range of 0°C to +40°C, and 25 program memory. LCD Display of working parameters and solenoid safety lock. The centrifuge is also provided with imbalance indication & safety cut off mechanism, Rotor in motion indication, safe lid open indication when rotor is static after the spin, working RCF reading, user de�inable acceleration and deceleration time setting in the range 30 to 510 seconds. CFC Free Refrigeration with Pre cooling and stand by cooling facility. Sturdy and safe metal fabricated body with ss chamber. Lid with Gas Spring for easy operation. Max. Capacity 7500 ml. Max. Speed 4500 RPM, Max. RCF 6080xg. (price without Rotor Heads)

8421 18

MP 6 B ‘eltek’HighVolumeCentrifuge, Floor Model with maintenance free Brush Less Induction Motor and Variable Frequency Drive, Advanced Microcontroller with soft touch key pad for setting Speed- 500 to maximum of rotor head speed, RCF Value, Rotor selection, Timer in the range 1 to 120 minutes with in�inite mode. 25 program memory. LCD Display of working parameters and solenoid safety lock. The centrifuge is also provided with imbalance indication & safety cut off mechanism, Rotor in motion indication, safe lid open indication when rotor is static after the spin, working RCF reading, user de�inable acceleration and deceleration time setting in the range 30 to 510 seconds. CFC Free Refrigeration with Pre cooling and stand by cooling facility. Sturdy and safe metal fabricated body with ss chamber. Lid with Gas Spring for easy operation. Max. Capacity 7500 ml. Max. Speed 4500 RPM, Max. RCF 6080xg. (price without Rotor Heads)

8421 18

Packing Wooden Box Packing charge for MP 6 K models of Refrigerated Centrifuges 8421 18

26

Use of Servo controlled voltage stabilizer is highly recommended and is a pre-condition for free service during guarantee

period. Capacity recommended: 5kVA. Stabilizers are not supplied by us and are to be procured by the user separately


GST%

RC 75 B “eltek'HI-VOLUMEREFRIGERATEDCENTRIFUGE is Heavy Duty �loor model unit suitable for varying centrifuge applications in Pharma & Biotechnology. The centrifuge is provided with Heavy Duty DC Motor, step less speed control, digital speed indicator, 1-99 Minutes digital timer with in�inite mode, temperature control cum indicator with working chamber temperature of 0°C to +40°C. Max. Speed 4500. Max. RCF 6080xg. depending on rotor heads (price without rotor head)

8421 18

SC 75 B “eltek'HI-VOLUMECENTRIFUGE is Heavy Duty �loor model unit suitable for varying centrifuge applications in Pharma & Biotechnology. The centrifuge is provided with Heavy Duty DC Motor, step less speed control, digital speed indicator, 1-99 Minutes digital timer with in�inite mode. Max. Speed 4500. Max. RCF 6080xg. depending on rotor heads (price without rotor head)

8421 18

Packing Wooden Box Packing charge for MP 75 B models of Refrigerated Centrifuges 8421 18


9987 18


INTERCHANGEABLEROTORHEADSUITABLEFORUSEWITHMP6KANDRC75BCENTRIFUGES

MP 61 6 Place Swing Out rotor head with wind shield suitable for metal carriers. (without carrier)

8421 18

MP 61A Set of 6 Metal carriers suitable to carry 1x1000 ml centrifuge bottles Max. RPM 4000, Max RCF 4800xg

8421 18

MP 62 4 Place Swing Out rotor head with wind shield suitable for metal carriers. (without carrier)

8421 18

MP 62B Set of 4 Metal carriers suitable to carry 1x1000 ml centrifuge bottles Max. RPM 4500, Max RCF 6080xg

8421 18

SC 7701 Angle Rotor Head 6 x 500 ml complete with polypropylene bottles. Max. Speed 4500 RPM. Max. RCF 3850 x g

8421 18

SC 7702 Angle Rotor Head 8 x 250 ml complete with polypropylene tubes. Max. Speed 4500 RPM. Max. RCF 3850 x g

8421 18


8421 18


8421 18


8421 18

SC 7706 Angle Rotor Head 72 x 15 ml complete with polypropylene tubes. Max. Speed 4500 RPM. Max. RCF 3850 x

8421 18

27


GST%

HI-VOLUMECENTRIFUGEWITHMICROCONTROLFORRESEARCH&BIOTECHNOLOGY

MP 45 ‘eltek’ High Volume Centrifuge, Floor Model with maintenance free Brush Less Induction Motor and Variable Frequency Drive, Advanced Microcontroller with soft touch key pad for setting Speed- 500 to maximum of rotor head speed, RCF Value, Rotor selection, Timer in the range 1 to 120 minutes with in�inite mode and 25 program memory. LCD Display of working parameters and solenoid safety lock. The centrifuge is also provided with imbalance indication & safety cut off mechanism, Rotor in motion indication, safe lid open indication when rotor is static after the spin, working RCF reading, user de�inable acceleration and deceleration time setting in the range 30 to 510 seconds. Sturdy and safe metal fabricated body with ss chamber. Lid with Gas Spring for easy operation. Max. Capacity 3000 ml. Max. Speed 4500 RPM, Max. RCF 3850 x g. (price without Rotor Heads)

8421 18



AngleRotorHeadsforusewithMP45Centrifuges.

SC 7701 Angle Rotor Head 6 x 500 ml complete with polypropylene bottles. Max. Speed 4500 RPM. Max.RCF 3850xg

8421 18

SC 7702 Angle Rotor Head 8 x 250 ml complete with polypropylene tubes. Max. Speed 4500 RPM. Max. RCF 3850 x g.

8421 18

SC 7703 Angle Rotor Head 12 x 100 ml complete with polypropylene tubes. Max. Speed 4500 RPM. Max. RCF 3850 x

8421 18


8421 18


8421 18


8421 18

BLOODBANKCENTRIFUGE

BLOODBANKREFRIGERATEDCENTRIFUGEWITHMICROCONTROL–FloorModel

MP 6000 R ‘eltek’HighVolumeRefrigeratedCentrifuge, Floor Model with maintenance free Brush Less Induction Motor and Variable Frequency Drive, Advanced Microcontroller with soft touch key pad for setting Speed- 500 to maximum of rotor head speed, RCF Value, Rotor selection, Timer in the range 1 to 120 minutes with in�inite mode, Temperature in the range of-5 0°C to +40°C, and 25 program memory. LCD Display of working parameters and solenoid safety lock. The centrifuge is also provided with imbalance indication & safety cut off mechanism, Rotor in motion indication, safe lid open indication when rotor is static after the spin, working RCF reading, user de�inable acceleration and deceleration time setting in the range 30 to 510 seconds. CFC Free Refrigeration with Pre cooling and stand by cooling facility. Sturdy and safe metal fabricated body with ss chamber. Lid with Gas Spring for easy operation. Max. Capacity 6000 ml. Max. Speed 4800 RPM, Max. RCF 6000 x g.

28

Model Description HSN

codeGST%

MP6000RCENTRIFUGEWITHWINDSHIELDSWINGOUTROTORHEADANDCARRIERS

MP 6000 R +

MP 6012

6 Place swing out rotor head with blood bag carriers suitable to carry 2 x 6 set of 450 ml Blood bags of quadruple bag system. (total capacity 12 set of quadruple blood bags system)

8421 18

MP 6000 R +

MP 6004

4 Place swing out rotor head with blood bag carriers suitable to carry 2 x 4 set of 450 ml Blood bags of quadruple bag system. (total capacity 8 set of quadruple blood bags system)

8421 18

MP 6000 R +

MP 6006

6 Place swing out rotor head with blood bag carriers suitable to carry 6 set of 450 ml Blood bags of quadruple bag system.

8421 18



9987 18

Use of Servo controlled voltage stabilizer is highly recommended and is a pre-condition for free service during guarantee period. Capacity recommended: 10kVA.3 Phase for MP 6000 R with 12 Bags capacity. 5 kVA 1 phase for MP 6000 R 6 & 8 Bags capacity. Stabilizers are not supplied by us and are to be procured by the user separately.

HI-VOLUMEREFRIGERATEDCENTRIFUGEFORBLOODBANKWITHMICROCONTROL(FloorModel)

RC 7500 eltek' HI-VOLUME REFRIGERATED CENTRIFUGE is Heavy duty �loor model unit suitable for Blood Bank applications. The centrifuge is provided with Heavy Duty DC Motor, step less speed control, digital speed indicator, 1-99 Minutes digital timer with in�inite mode, temperature control cum indicator with working chamber temperature of 0°C to +40°C. Max. Speed 4500. Max. RCF 5000 x g. The centrifuge complete with Wind Shield Swing Out Rotor head and carriers for 6 blood bags of 500 ml in 3 bags system capacity.

8421 18

Packing Wooden Box Packing charge for RC 7500 models of Refrigerated Centrifuges 8421 18


29

LABORATORYEQUIPMENTS

LaboratoryRefrigerator

EltekLaboratoryRefrigerator they are equipped with Hermitical type heavy duty compressors. Inner chamber have direct air�low system for temperature uniformity to maintain vital operational Temperature of 2 to 8˚C. Display ensures crystal clear and accurate temperature values from long distance. The transparent inner door provides clear viewing kept in the chamber. TechnicalSpeci�ication:

• Micro controller based graphic LCD display • CFC free refrigerant and high density PUF insulation • Audio – Visual alarm when the temperature deviates • Inner SS 304 Grade Stainless steel and outer Mild steel powder coated • Blower motors for Temperature uniformity in chamber • LED lamp for chamber internal visibility • Password Protected control panel • Purported Stainless Steel heavy duty Trays • Castor wheels for easy mobility • Input Voltage 230VAC 50 Hz • Accuracy : ± 0.5˚C

ModelNo. CapacityHSNCode

GST%

ELR-100 100 Liters. 8418 18

ELR-200 200 Liters. 8418 18

ELR-300 300 Liters. 8418 18

ELR-400 400 Liters. 8418 18

ELR-500 500 Liters. 8418 18

ELR-600 600 Liters. 8418 18

ELR-700 700 Liters 8418 18

ELR-800 800 Liters 8418 18

ELR-900 900 Liters 8418 18

ELR-1000 1000 Liters. 8418 18

ELR-1500 1500 Liters 8418 18

ELR-2000 2000 Liters 8418 18

DEEPFREEZER-20°CVertical

EltekDeepFreezer(-20˚C) with advanced micro control for setting and precise maintenance of set parameters. Operation is made simple with the help of soft buttons. TechnicalSpeci�ications:-

• Temperature : -20˚C • Inner SS 304 grade stainless steel and outer Mild steel powder coated • CFC free gas and high density PUF Insulation . • Password protected control board • Purported Stainless Steel heavy duty Trays • Heavy duty castor wheels for easy mobility • Micro Controller based Graphic LCD display • Eco – Friendly refrigerator system with time delay • Audio –Visual alarm if the temperature deviates. • Input Voltage 230VAC 5

laboratory& blood bank equipmentls 110.2 b `eltek’ lab stirrer, 1/8 hp motor, stirring shaft ss...

Documents