lamele plafon metalic suspendat lamelar · lamele system plafonul metalic lamelar prometal® poate...
TRANSCRIPT
Strips
Lamele
STR
IPS
FO
R F
ALS
E C
EIL
ING
SP
LA
FO
N M
ETA
LIC
SU
SP
EN
DAT
LA
ME
LA
R
Lamele System
Plafonul metalic lamelar PROMETAL®
poate fi utilizat pentru decorare saurenovare, pentru a crea paravane sauce este necesar pentru a utiliza lamaxim toate spatiile interene, externe,etc.Creativitatea acestui material oferaoportunitatea arhitectului de a realizaproiecte cu un design deosebit, dato-rita existentei unei largi game de tipuride lamele si culori.
PROMETAL® metal strips can beemployed to decorate or renew, tocreate screens or partitions, to buildfunctional internal or external spacesetc..The creative possibilities of our pro-ducts allow the designer to obtain freeand different configurations of thefalse ceilings, thanks to the varioustype of sections and wide range ofcolours.
Lamele PROMETAL®
PROMETAL®Strips
3
Lamele System
4
5
Lamele System
AVANTAJE
Este economic si usor de instalat.
O mare durata de viata, suprafetelevopsite nu sufera deteriorari din cauzaumezelii sau a murdariei.Un design variat, gama foarte mare deforme, dimensiuni si sisteme de mon-taj ofera plafonului metalic lamelarprodus de PROMETAL® oportunitateade a putea fi utilizate intr-o mare gamade zone ambientale cum ar fi: spitale,birouri, magazine, expozitii, aeroportu-ri,etc..Plafoanele suspendate ascund insta-latiile electrice, instalatiile de ventilatiesau orice traseu tehnic ce se aflasuspendat deasupra plafonului si permit accesul in orice punct.
REZISTENTA LA FOC
Clasa “0”D.M.din 26.06.84 (S.O.G.U.nº 234 din25.08.84)D.M.din 14.01.85 (G.U.nº 16 din19.01.85)Atat pentru otel cat si pentru aluminiu.
IZOLARE ACUSTICA(FONICA)
Pentru a asigura o buna izolare acusticatrebuie sa se opteze pentru panouriperforate (vezi tabelul de perforari)care sunt captusite pe interior cu unfiltru negru lipit la cald.
IZOLARE TERMICA
Izolarea termica se realizeaza cu ajutorul unei saltele din vata mineralade sticla, sau a altui material cu conductivitate termica similara, ase-zata deasupra plafonului casetat.
SERVICII INTEGRATE
Flexibilitatea sistemului permite montareafoarte usoara a urmatoarelor accesorii:
Corpuri de iluminat printre care se potenumera canale luminoase, plafoniere,spoturi incastrate, etc;
Sisteme de ventilatie: grile de absorb-tie si refulare de aer, anemostate, ven-tilatoare etc;
Sisteme de siguranta, cum ar fi, sprinklere, senzori de fum, etc.
ADVANTAGES
Economic and easy to install.
Durability:Strips are provided with a longlasting, humidity resistant and dirtrepellent paint finish.
Flexible design options:Wide varity of shapes, modulationand installation make PROMETAL®
strips suitable for a great numberof applications in hospitals office,shops, exibitions centres, airports,etc..
Easy access at any point for main-tenance of services installed in theceiling cavity.
FIRE CLASSIFICATION
Class “0”D.M. dt 26.06.84 (S.O.G.U. n° 234 dt25.08.84)D.M. dt 14.01.85 (G.U. n° 16 dt19.01.85)for steel and for aluminium.
SOUNDPROOFING
When more efficient sound-absorp-t ion is requi red we propose the application of non woven fabric sealedby hot gluing on the back perforatedstrips.
THERMAL INSULATING
The needs of thermal insulation can beachieved with the application of absor-bing pads or other insulating materialswhich can be selected on the marketfor the specific applications.
SERVICES INTEGRATION
The system easily accommodatesessential facilities such as:
Modular light fittings, spotlights;
Air diffusers of different shape (linear,square or round);
Security devices, water sprinklers andsmoke detectors.
6
Lamele System
GROSIME MATERIAL Thickness (mm)
CU MARGINI ROTUNJITE CU SPATIU INTERMEDIAR – ROUND WITH CARRIER
LAMELE CU UNGHIURI DREPTE PE STRUCTURA PORTANTA – SHARP EDGE WITH CARRIER
SPIGOLATE AUTOPORTANTILAMELE CU UNGHIURI DREPTE AUTOPORTANTE – SHARP EDGE SELF SUPPORTING
7
TIPOLOGIE SI DIMENSIUNI - TYPES AND SIZES
SISTEM DEMONTAJ
Installation
PROFIL PORTANT Carrier
PROFILShape
TIPType
MODULSizes(mm)
ALUMINIUAluminium
OTELSteel
PERFORATIIOpen area
Ø
84R* 100 0.5/0.6 1-2
134R* 150 0.5/0.6 2
184R* 200 0.6 2
84RC* 100 0.5/0.6 1-2
134RC* 150 0.5/0.6 2
184RC* 200 0.6 2
SPATIUINTERMEDIARDESCHIS16 mm
open gap16 mm
SPATIUINTERMEDIARINCHIS16 mm
closed gap16 mm
T3 + GIUNTO
T4 + GIUNTO
GROSIME MATERIALThickness (mm)SISTEM DE
MONTAJ Installation
PROFIL PORTANTCarrier
PROFILShape
TIPType
MODULSizes(mm)
ALUMINIUAluminium
OTELSteel
PERFORATIIOpen area
Ø
P100/C 100 0.5/0.6 0.5All. 2-3-4Acc. 2
P150/C 150 0.5/0.6 0.5All. 2-3-4
Acc. 2
P200/C 200 0.5/0.6 0.5 2
P300/C 300 0.6 0.5 2
P100/SF 100 0.5/0.6 0.5 2
P150/SF 150 0.5/0.6 0.5 2
P200/SF 200 0.5/0.6 0.5 2
P300/SF 300 0.6 0.5 2
SPATIUINTERMEDIARINCHIS10 mm
closed gap10 mm
FARA MARGINEDE INCHIDERE
without gap
T4
GIUNTO T4
GROSIME MATERIALThickness (mm)SISTEM DE
MONTAJInstallation
CU SPATIU INCHISCarrier
PROFILShape
TIPType
MODULSizes(mm)
ALUMINIUAluminium
OTELSteel
PERFORATIIOpen area
Ø
P100/APP 100 0.5/0.6 0.5All. 2-3-4
Acc. 2
P150/APP 150 0.5/0.6 0.5All.2-3-4Acc. 2
P200/APP 200 0.5/0.6 0.5All. 2-3-4
Acc. 2
P300/APP 300 0.6 0.5All. 2-3-4
Acc. 2
P100/HS 100 0.5/0.6 0.5All. 2-3-4
Acc. 2
P150/HS 150 0.5/0.6 0.5All. 2-3-4
Acc. 2
P200/HS 200 0.5/0.6 0.5All. 2-3-4
Acc. 2
P300/HS 300 0.6 0.5All. 2-3-4
Acc. 2
SPATIUINTERMEDIAR INCHIS10 mmPANA LA UN MAXIM
DE 3000 mm
closed gap10 mm Panel-spanof max 3000 mm
FARA MARGINEDE INCHIDERE
PANA LA UN
MAXIM DE
2500 mm
without gapPanel-span ofmax 2500 mm
SE POZITIONEAZA DIRECT
PE PROFILUL PERIMETRAL
SAU PE TRAVERSE
ALFA PARALLEL
Strips are simply laid onedge profile, bandraster or
ALFA PARALLEL profiles
Lamele System
23
23
15
15
20
20
20
13
13
PROFILE PERIMETRALE - EDGE PROFILES
PROFIL “L’’“L” SHAPED PROFILE
PROFIL “C’’“C” SHAPED PROFILE
PROFIL “DUBLU L’’“DOUBLE L” SHAPED PROFILE
8
Lamele System
PROFILE DE INCHIDERE
Pentru profilele cu marginea rotunjitasi cu spatiu intermediar deschis esteprevazuta posibilitatea de a puteainchide aceste spatii cu profile specificeconform tabelului alaturat:
CLICK PROFILES
For round strips with open gap as wellas for multi-width strips it is possibileto close joints with suitable infills ofdifferent shapes:
PROFILE DE CAPAT
Pentru imbinarile longitudinale sau pentrusprijinirea pe profile perimetrale a plafonu-lui metalic realizat din profile lamelare s-aurealizat diferite profile speciale asa cum sepoate observa in tabelul alaturat:
END CLOSING
Special end closins can be provide onsharp edge strips to solve junctionsbetween strips as well as for installa-tion lay-in. End closing have been studied with following different shapes.
PROFIL AEnd closing A
24
17
Pentru plafonul metaliclamelar asezat direct pe pro-filul perimetral. Acest tip deprofil permite mentinerealamelelor perfect drepte.
Lay-on.End closin 90° keeps stripsperfectly flat.
PROFIL BEnd closing B
24
11
Pentru plafonul metaliclamelar semiincastrat asezatpe un profil perimetral L saupe o structura portanta T 24sau T 15.
Recessed on “L” shapedprofile, T24 or T15 main runners or double “T” profile.
PROFIL CEnd closing C
27 24
Pentru plafonul metalic lame-lar sustinut de profile perime-trale ALFA.Acest profil oferaavantajul de a mentine nivelulplafonului la nivelul structuriide sustinere.
Flush on “C” grid runners of ALFA SYSTEM.
ROTUNJITERound
MULTIMODULAREMulti-width
84R134R184R
30BD80B
130B180B
84RC134RC184RC
POSITIV-Flat recessed
NEGATIV-V recessed
LATIMI MULTIPLE - MULTI WIDTH
DISPERSOARE DE LUMINA - SUN LOUVRES
GROSIME MATERIAL Thickness (mm)SISTEMUL DE
MONTAJ Installation
PROFIL PORTANTCarrier
PROFILShape
TIPType
MODULSizes(mm)
ALUMINIUAluminium
OTELSteel
PERFORATIIOpen area
84R*
86 0.6
69 0.6
F30
F45
GROSIME MATERIAL Thickness (mm)SISTEMUL DE
MONTAJ Installation
PROFIL PORTANTCarrier
PROFILShape
TIPType
MODULSizes(mm)
ALUMINIUAluminium
OTELSteel
PERFORATIIOpen area
Ø
S/40 80 0.5/0.6 0.5All. 2-3-4
Acc. 2
30BD* 50 0.5/0.6 0.5All. 2-3-4
Acc. 2
80B* 100 0.5/0.6 0.5All. 2-3-4
Acc. 2
130B* 150 0.5/0.6 0.5 All. 2-3-4Acc. 2
180B* 200 0.5/0.6 0.5 All. 2-3-4Acc. 2
V100* 100 0.5/0.6 0.5
V200* 200 0.5/0.6 0.5
SPATIU INTER-MEDIAR DESCHIS40 mmopen gap40mm
SPATIUINTERMEDIARDESCHIS20 mm
open gap20 mm
9
TS
V100
GIUNTO
VERTICALE
verticals
* = Aceasta tipologie este comercializata in italia si sub marca * = For italian market thease strips are sold also with brand name
Lamele System
CULORI
PREVOPSITEAlb (similar RAL 9003)Argintiu (similar RAL 9006)
POSTVOPSIT Garantarea unui foarte bun rezultatestetic al tuturor produselor se datoreaza faptului ca fabrica dispunede un sistem modern de vopsire pebaza de pulberi in camp electrostatic,.Gama foarte mare de culori utilizatagaranteaza satisfacerea cerintelorclientului.Produsele vopsite au fost testate sipot sa reziste mai mult de 1200 de orein ceata salina.
SISTEMUL DE MONTAJ
Plafonul metalic lamelar PROME-TAL® se monteaza pe diverse struc-turi portante in functie de exigente.In general exista doua tipuri destructura portanta:
PRIN CLIPSARE PE UN PROFILPORTANT
Aceasta tipologie prevede montarealamelelor pe profile portante.Traversele de sustinere trebuie sa fiemontate la o distanta de 1270mm unafata de cealalta si la o distanta maximade 300mm fata de profilul perimetral.Sistemul de suspendare al tavanuluieste format din tiranti rigizi din otel zin-cati si o lamela elastica, care asiguraun reglaj milimetric, ceea ce permiteobtinerea unei planeitati perfecte atavanului casetat.
PRIN SPRIJINIRE PE PROFILE LAVEDERE
In acest caz plafonul metalic auto-portant este sprijinit pe profileleperimetrale (pentru suprafete culatimea mai mica de 2500mm).
COLOURS
PRE-PAINTED White (similar RAL 9003)Silver (similar RAL 9006)
POST-PAINTEDWe have a modern painting plant thatuses liquid and polyester coating(thickness of 60 micron), which guarantees an excellent aestheticresult for all products.The wide range of colours allows us tomeet any possible requirements.Maximum lenght for painting is 4000mmThe painted products are tested to aresistance of 1200 hours of salt spray.
ASSEMBLY
PROMETAL® strips can be installedon different suspension sustemsaccording to design:
CLASPED ONTO MAIN CARRIER
The carrier (orthogonal to the strips)must be positioned with a centre dis-tance of about 1270 mm and at a max300 mm from the wall.
Supporting system consists of rigidrod hangers with adjusting spring anda cross for a fast connection to thecarrier so as to obtain a perfectly flatand horizontal position of the false ceiling.
LAID ON EXPOSED SUPPORTIN PROFILES
Sel f support ing str ips with maximum span of 2500 mm aresimply laid on edge profiles.
10
Lamele System
MANIPULARE SI DEPOZITARE
Lamelele se depoziteaza in spatiiuscate si acoperite.
Lamelele se pastreaza in ambala-jul propriu pana in momentulinstalarii lor.
Cutiile trebuiesc asezate si pozi-tionate conform indicatiilor exi-stente pe ele.
Pentru a evita deteriorarea produse-lor este necesara atentie la manipu-lare si la desfacerea ambalajelor.
INSTRUCTIUNI DE INTRETINERE
Pentru o intretinere corecta trebuiescrespectate urmatoarele instructiuni:
Lamelele pot fi sterse de praf cu ocarpa moale si curata.
Eventualele pete de grasime vor ficuratate cu ajutorului unui detergentfin, special pentru acest tip de produs.
A nu se folosi detergenti duri sau carpedintr-un material abraziv, Curatirea seface prin simpla stergere si in nici uncaz prin frecare.
STORAGE AND HANDLING
Ceil ing components must be stored in a dry interior location.
They must remain in original packing until installation.
Car tons must be s tored and oriented as per instructions.
Special care must be used duringhandling and opening of boxes toavoid damages.
CLEANING
For a correct cleaning:
Dust should be removed from thesurface by wiping with a clean softcloth;
Grease and fingerprints should beremoved with a mild householdcleaner suitable for this use;
Don’t use abrasive cleaners orscrub the surface
11
Lamele System
DETTAGLI TECNICI - TECHNICAL DETAILS
12
41
161616 84100
84100
23
23
SEZ. A-A
SERIE RC
SERIE R
Profil portant tip T3Carrier type T3
TitrantHanger
Profil a "L""L" shaped profile
8.5
19.5
10.589.5 89.5
100 100
10.5
54.6
23
23 10.5
SEZ. A-A
SERIE C
Profil a "L"Profil portant tip T4Carrier type T4
"L" shaped profile
TitrantHanger
99.5 99.5100 100
54
.6
23
23
SEZ. A-A
SERIE SF
Profil a "L""L" shaped profile
TitrantHanger
Profil portant tip T4Carrier type T4
20
4.5
20 130150
42
23
23
SEZ. A-A
SERIE B
SERIE S
Profil portant tip TSCarrier type TS
TitrantHanger
Profil a "L""L" shaped profile
Lamele System
SECTIUNE TIPICA – TYPICAL SECTIONS
13
90
100 100
SEZ. A-A
Carrier
TitrantHanger
Brida fixareHolder
SERIE V
Profil portant
69
24∞30'
69
SEZ. TIPO
Profil portant tip F30F30 carrier
Lamela 84RStrip 84R
DISPERSOARE DE LUMINA F30
SUN LOUVRES F30
DISPERSOARE DE LUMINA F45
SUN LOUVRES F45
45∞
86
86
SEZ. TIPO
Lamela 84RStrip 84R
F45 Carrier Profil portant tip F45
Lamele System
GUIDE TO SPECIFICATIONS
• PROMETAL® STRIPSSupply of false cei l ing build withPROMETAL® strips type.......................according to list (see page 7-9)
Made in galvanized steel / aluminium
Thickness............................................WhiteSilverAccording to RAL colour list.……....
Finishing:
PlainPerforated ø....................................
Perforated strips can be supplied with nonwoven fabric certified SOUNDTEX® sealed byhot gluing on the back of panels and/or mineral wool pad.
• STRIPS WITH CARRIERSStrips are clasped onto carriers madegalvanized steel 0.6 mm raw of darkpre-painted type:
Carrier T3Carrier T4Carrier TS
Suspension:Hanging system consists of rigid rodhanger diam. 4 mm with adjustingsprings and a cross for fast connectionto the carrier.
Edge profiles in matching colours areavailable in following different shapes:
“L” with sizes 23x23 mm “C” with sizes suitable to strips
“double L” with sizes 20x13x13x20 mm
• SELF SUPPORTING STRIPSAre laid on different profiles:
“L” shaped profileT24 main runnerT15 main runnerDouble T profileC-grid of ALFA SYSTEMOther: specify………………………….
Fire classification: class “0” D.M. dt26.06.84 (S.O.G.U. n° 234 dt 25.08.84) and D.M. dt 14.01.85 (G.U. n° 16 dt19.01.85)
14
Lamele System
GHID DE SPECIFICATII
• LAMELA PROMETAL®
Furnizarea de plafon metalic lamelarPROMETAL® tipul………………....(vezitabelele de la pag. 7-9)
Realizat din otel zincat sau aluminiu
Grosime...............................................ALBArgintiuPostvopsit conform cartelei de culori RAL
Finisajul lamelelor:
CompactPerforat in procen de................................
Lamelele pot fi livrate cu o captuseala dintr-un filtru certificat SOUNDTEX® lipit la caldpe intradosul panoului si/sau cu o salteatermoizolanta.
• STRUCTURA DE SUSTINEREPlafonul lamelar metalic se monteaza pe ostructura portanta formata din profile dinotel zincat de culoare neagra cu grosimeade 0,6 mm de tipul:
Profil portant T3Profil portant T4Profil portant TS
Suspendarea:Suspendarea este realizata cu ajutorul unor tiranti rigizi din otel zincat si a unor lamele flexibile.
Perimetral plafonul va fi finisat cu unprofil din otel zincat cu grosimea de0,5mm de culoare si model adecvat;
“L” cu dimensiuni de 23x23 mm“C” cu dimensiuni adaptate tipului de lamela ales
“DUBLU L” cu dimensiuni de 20x13x13x20 mm
• PLAFONUL AUTOPORTANTeste montat cu ajutorul urmatoarelor profile:
Profil perimetral “L”Profil perimetral T24Profil perimetral T15Profil perimetral TProfil perimetral ALFAAltul:..................………………..........
Reactia la foc : clasa 0 conform D.M. din26.06.84 (S.O.G.U.n°234 din 25.08.84) siurmata de D.M. din 14.01.85 (G.U. n°16 din19.01.85)
Conform legilor in vigoare cu referire la drepturile de autor aceasta brosura nu poate fi copiata, reprodusa sau oferita altor persoane sau firme fara autorizarea s.c. PROMETAL® srl. Informatiile si datele mentionate sunt valabile in contextul mentionat. Nu se ofera nici o garantie pentru conditiile care nu se supun contextului. Fiecare utilizator trebuiesa execute probele necesare pentru a determina compatibilitatea materialului cu proiectul dorit.pentru orice caz particular va rugam contactati serviciul tehnic. S.c. PROMETAL® srl isi rezerva dreptul de a schimba datele din acest catalog fara nici un preaviz.
In accordance with copyright law currently in force, this publication may not be copied, reproduced or divulged to other persons or legal entities without theconsent of PROMETAL® S.p.A.The information and data provided are given in good faith and believed to be correct on the basis of current knowledge and practice. However, the company cannot beheld liable for the use of the said information and data, nor can any form of guarantee be presumed. Each user must perform the necessary tests to determine the suitability of the material for the specific application concerned. For specific cases, please contact our Technical Department. PROMETAL® S.p.A. reserves the right to change the data provided without notice.
PROMETAL S.p.A.HEAD OFFICE AND FACTORY:VIA BACCHIGLIONE, 36 Z.I.36033 ISOLA VICENTINA (VI) - ITALYTEL. ++39 0444 977400 r.a. FAX ++ 39 0444 976966e-mail: [email protected]
www.prometal.it
S.C. PROMETAL SRL:Sediu: Soseaua de Centura 103,Popesti Leordeni,IlfovTel:(004)0214920550; (004)0722855782Fax: (004)0214920551e-mail: [email protected]