EV25DS

1064nm wavelength, air-cooled, single phase,

diode end-pumped, Q-switched, 25 Watt

Nd:YVO4 laser marker

Excellent choice for high speed surface and deep marking of almost every

type of metal.

Excellent choice for high speed marking of plastics

and label materials.

Excellent choice for deep marking of silicon.

Cannot mark wood. Can mark some other

organic materials.

Excellent choice for marking high resolution

graphics due to small spot size.

ProStation

Available

EV40

1064nm wavelength, air-cooled, single phase,

diode end-pumped, Q-switched, High pulse

energy, 40 Watt, Nd:YVO4 laser marker

Best choice for high speed surface and deep

marking of almost every type of metal.

Best choice for high speed marking of plastics

and label materials.

Best choice for deep marking of silicon.

Cannot mark wood. Can mark some other

organic materials.

Best choice for high speed marking high

resolution graphics due to small spot size.

ProStation

Available

EV15DSEV10SDS

1064nm wavelength, air-cooled, single phase,

diode end-pumped, Q-switched,

15 Watt and 10 Watt, Nd:YVO4 laser marker

Good choice for high speed surface and deep marking of almost every

type of metal.

Excellent choice for high speed marking of plastics

and label materials.

Excellent choice for surface marking of silicon.

Cannot mark wood. Can mark some other

organic materials.

Excellent choice for marking high resolution

graphics due to small spot size.

ProStation

Available on EV15DS

LASER SYSTEMS/APPLICATIONS

Marking metals

Marking plastics and label materials

(3M, Tesa, etc.)

Marking silicon

Marking organic materials

Marking high quality graphics

Workstations

Vari-Z 3-Axis Marking

Laser Marking System Selection Guide

EVCDS/EVC1064nm wavelength,

air-cooled, single phase, diode end-pumped,

Q-switched,compact, high reliability,

9 Watt and 8 Watt, Nd:YVO4 laser marker

Good choice for surface marking of almost every type of metal with very

small heat effected zone.

Good choice for marking plastics and

label materials.

Can do surface marking of silicon.

Cannot mark wood. Can mark some other

organic materials.

Excellent choice for marking high resolution

graphics due to small spot size.

ProstationMiniStationTablePro

DrawerPro

Available on EVCDS

FQ50, FQ30, FQ20

1060nm wavelength, air-cooled, single phase,

Q-switched, 50,30, and 20 Watt

Yb fiber laser marker (Will provide faster cycle

times than FQ10.)

Better choice for surfaceand deep marking of some

metals. Special care is required for copper, brass

or any other highly reflective or polished

metals.

Better choice for marking many plastics and label

materials. (Some surface melting can occur due to

long pulse width.)

Capable of deep marking of silicon.

Cannot mark wood. Can mark some other

organic materials.

Can mark high quality graphics on some metals.

ProStation MiniStationTablePro

DrawerPro

Available

LASER SYSTEMS/APPLICATIONS

Marking metals

Marking plastics and label materials

(3M, Tesa, etc.)

Marking silicon

Marking organic materials

Marking high quality graphics

Workstations

Vari-Z 3-Axis Marking

FQD100

1060nm wavelength, air-cooled, single phase, Q-switched, Dual 50 Watt

Yb fiber laser marker

Best choice complex or

multi-surfaceand deep marking of most

metals. Special care is required for copper, brass

or any other highly reflective or polished

metals.

Best choice for complex or multi-surface marking

many plastics and label materials. (Some surface melting can occur due to

long pulse width.)

Capable of multi-surface and deep

marking of silicon.

Cannot mark wood. Can mark some other

organic materials.

Can mark high quality graphics simultaneously in

different locations

ProStation

Not Available

Laser Marking System Selection Guide

EY6DS

1064nm wavelength, air-cooled, single phase,

diode end-pumped, Q-switched, 6 Watt,

Nd:YAG laser marker

Good choice for surface and deep marking all

metals.

Good choice for marking plastics and label materials.

Capable of deep marking of silicon.

Cannot mark wood. Can mark some other

organic materials.

Excellent choice for marking high resolution graphics due

to small spot size.

ProStationMiniStation TablePro

DrawerPro

Not Available

FQ10

1060nm wavelength, air-cooled, single phase,

Q-switched, 10 Watt Yb fiber laser marker

Good choice for surfaceand deep marking of some

metals. Special care is required for copper, brass

or any other highly reflective or polished

metals.

Better choice for marking many plastics and label

materials. (Some surface melting can occur due to

long pulse width.)

Capable of deep marking of silicon.

Cannot mark wood. Can mark some other

organic materials.

Can mark high quality graphics on some metals.

ProStationMiniStation TablePro

DrawerPro

Available

For all applications, it is highly recommendedthat samples be sent to TELESIS for

qualification and testing purposes.

CO10A/CO10AP

10.6um wavelength, air- cooled, single phase,

RF excited, 10W CO2 laser marker

Can mark some anodized metal surfaces.

Excellent choice for high speed marking of plastics and some label materials.

Not recommended

Excellent choice for marking wood and other

organic materials.

Can mark high quality graphics on plastics and

on some anodized metal surfaces.

ProStationTablePro

DrawerProothers consult factory

Not Available

EV4GDS

532nm wavelength; air-cooled; single phase;

diode end-pumped, Q-switched, green

laser marker

Excellent choice for high speed surface marking all

metals with very small heat effected zone produced.

Excellent choice for marking plastics. Marks large variety

of plastics.

Excellent choice for surface marking of silicon.

Cannot mark wood. Can mark some other

organic materials.

Excellent choice for marking high resolution graphics due to small spot size. Highest

resolution capability.

ProStationTablePro

DrawerPro

Available

CO30AP

10.6um wavelength, air-cooled, single phase,

RF excited, 30W CO2 laser marker

(provides faster cycle times than CO10 series)

Can mark anodized metal surfaces. With short focal length lenses, can mark some non-plated metal

surfaces.

Excellent choice for high speed marking of plastics and some label materials.

Not recommended

Excellent choice for marking wood and other

organic materials.

Can mark high quality graphics on plastics and

on some anodized metal surfaces.

TableProDrawerPro

others consult factory

Not Available

CO60

10.6um wavelength, air-cooled, single phase,

RF excited, 60W CO2 laser marker

(provides faster cycle times than CO30 series)

Can mark anodized metal surfaces. With short focal length lenses, can mark some non-plated metal

surfaces.

Excellent choice for high speed marking plastics and

some label materials.

Not recommended

Excellent choice for marking wood and other

organic materials.

Can mark high quality graphics on plastics and

on some anodized metal surfaces.

TableProDrawerPro

others consult factory

Not Available

LASER SYSTEMS/APPLICATIONS

Marking metals

Marking plastics and label materials

(3M, Tesa, etc.)

Marking silicon

Marking organic materials

Marking high quality graphics

Workstations

Vari-Z 3-Axis Marking

Laser Marking System Selection Guide