lava ultimate cad/cam restorative. using a sanding or course rubber wheel, grind and smooth off...
TRANSCRIPT
Lava™ UltimateCAD/CAM Restorative
Lava™ Ultimate CAD/CAM Restorative
Using a sanding or course rubber wheel, grind and smooth off sprue
Extra-oral Finishing and Polishing
Lava™ Ultimate CAD/CAM Restorative
Using a #9 Robinson bristle brush, incorporate polishing paste into brush
Lava™ Ultimate CAD/CAM Restorative
Apply to surface of restoration with low speed hand piece working slowly into surface and see luster within seconds
Lava™ Ultimate CAD/CAM RestorativeBuff with muslin rag wheel
Lava™ Ultimate CAD/CAM Restorative
Before and After Polishing Result
After Milled Polished
Lava™ Ultimate CAD/CAM Restorative
Adjust with Diamond Bur
Intra-oral Finishing and Polishing
Lava™ Ultimate CAD/CAM RestorativeFinish Adjusted Area with Course and Medium Rubber Point
Course Medium
Lava™ Ultimate CAD/CAM RestorativeDispense Polishing Paste and Polish
High-shine polish adjustment area with intra-oral polishing paste and soft prophy brush
Lava™ Ultimate CAD/CAM RestorativeProducts
Bristle Brush– #9 Soft Robinson Bristle brush
Polishing paste– VH Technologies Diashine Fine
Soft Extraoral Polishing– Premier Diamond Twist Paste SCO– Shofu Direct Dia Polishing Paste– Renfert OPAL™ Ref 520-0000
Intra-oral brush– Crescent® Latch Angle Soft Black
Prophy Brush for Intraoral Use
Intraoral polishing paste– VH Technologies Diashine Intraoral
Polishing Paste– Shofu Direct Dia Polishing Paste
Diashine is a registered trademark of VH Technologies . Diamond Twist Paste is a registered trademark of Premier. Direct Dia Polishing Paste is a registered trademark of Shofu. OPAL is a registered trademark of Renfert. Crescent is a registered trademark of DENTSPLY International.
Lava™ Ultimate CAD/CAM RestorativeCharacterization Pit and Fissure
1) Roughen area before staining. If needed, create space for stain (must maintain min. thickness per IFU.)
2) Apply Scotchbond™ Universal Adhesive.
3) Light cure.
4) Apply composite stain with brush, (i.e., Sinfony™ Magic Stain; Shofu Life Art; Kerr Kolor +Plus; Ivoclar Tetric Color)
5) Light cure. If required by the stain used, cover with thin layer of Filtek™ Supreme Ultra Flowable Restorative and cure.
6) Polish.
Occlusal Surface Only!
Life Art is a registered trademark of Shofu. Tetric Color is a registered trademark of Ivoclar.