WWW.CACGAS.COM.AU

Leaders in Specialty Gas Solutions

CAC GAS specialises in calibration gas products for applications in gas detection, process gas analysis, environmental monitoring and laboratory gas analysis. We are leaders in providing unique solutions to the industrial, mining, emergency response, research and governmental sectors.

Our highly technical support team develop solutions to meet your requirements and exceed your expectations. We focus on improving efficiency, improving productivity

and reducing total cost. We source speciality gas mixtures globally providing reference, certified, EPA and ISO 17025 gas mixtures for all your technical requirements.

A total solution provider, CAC GAS supplies gas generators, mixers, calibrators along with a complete gas control product range including regulators, outlet panel, manifolds and gas distribution systems.

CAC Gas & Instrumentation was established in 2008 to provide Australian and New Zealand customers with exceptional support when sourcing calibration, speciality gas mixtures and associated products. CAC GAS is now proud to provide our products and services globally.

At CAC, we focus on improving

boosting and

efficiency, productivity reducing cost.

OIL / GAS /PETROCHEMICAL

SHIPPING & TRANSPORT

CONSTRUCTION

WATER / WASTEWATER

FOOD & BEVERAGE PROCESSING

EMERGENCY SERVICES

MINING STEEL

UNIVERSITIES / SCIENTIFIC

POWER GENERATION

PULP & PAPER

DEFENCE

MarketsCAC GAS provides calibration gas, speciality gas mixtures, regulators, speciality regulators and gas control systems for applications in all market sectors. CAC provides speciality calibration gas mixtures in multiple cylinder sizes focusing on the application to ensure customer requirements are maximised.

With over 75 years of experience in calibration gases, gas detection and gas analysers, CAC brings practical knowledge and skills in understanding customer requirements and providing solutions that exceed customer expectations.

Leaders in providing unique solutions, CAC GAS takes the time necessary to properly evaluate and understand customer applications and objectives. We provide the most efficient and cost-effective solution possible for the largest and smallest of applications.

Based in Sydney, CAC GAS has the logistic expertise to supply speciality gas mixtures throughout Australia/New Zealand and globally. We stock a large number of gas standards and enter into supply agreements with organisations where immediate delivery is required.

Analytical gas mixtures for process on-line measurement are key contributors for manufacturing and quality assurance. Our ISO 17025 accredited calibration gases ensure accurate traceable calibrations.

Whether the requirement is a certified, traceable or an ISO17025 accredited gas standard, CAC GAS analyses your requirements and provides a technical solution which meets your specific needs in a cylinder size that is fit for purpose.

Process gas measurement requires speciality gas control systems. CAC provides a complete technical solution including regulators, manifolds and outlet panels.

CAC GAS provides calibration and bump test solutions to help ensure the safety and accuracy of your precision gas detection instruments.

Whether you require a simple disposable cylinder or a complete gas distribution system connecting gas mixtures to hundreds of docking stations, CAC GAS has the solution.

As a speciality gas manufacturer, we supply calibration gas for every gas detection instrument whether they are portable or fixed. Gas mixtures are available in a variety of sizes from 34 litres to 7500 litres with regulators to match your requirements.

Gas DetectionProcess GasAnalysis

Gas Chromatography and other laboratory analysers require the highest level of accuracy and uncertainty in calibration gas to provide accurate and repeatable results.

CAC GAS provides gravimetrically produced calibration and speciality gas mixtures manufactured to the highest global standards.

To complement traditional gas mixtures, CAC GAS provides carrier gas generators, gas dividers and gas calibrators which can expand the benefits of accurate gas mixtures. With a complete line of gas control products, CAC GAS can provide a total solution for any laboratory application.

Environmental protection requires accurate and precise measurement of gas emissions in all industrial and power plant stack gas applications. CAC GAS supply EPA Protocol gas mixtures prepared and analysed in strict accordance with the EPA’s most current guideline – EPA Traceability Protocol Assay and Certification of Gaseous Calibration Standards.

In addition, we supply ISO 17025 Continuous Emissions Monitoring (CEM) gas standards for CO2, CO, O2, NO, NO2 and SO2. All gas mixtures are traceable to either NIST or UKAS accreditation organisations.

EmissionsMonitoring

Laboratory Gas Analysis

Applications

Product FamiliesCAC GAS supplies a complete line of calibration and speciality gas mixtures, gas generators and gas control systems. We support those product lines with the highest level of technical competence and support services.

Calibration Gas & Speciality Gas Mixtures

Gas Control, Regulators & Distribution Systems

Non-Refillable Cylinders In Various Litre Sizes – 34L / 65L / 103L / 112L

Pressure And Flow Regulators In Multiple Configurations

Manifold, Outlet Panel & Protocol Stations

Traceable, Certified & ISO 17025 Gas Mixtures

Bench & Wall Mount Regulators

No Cylinder Rental Fees & Australia Wide Recycling Program

EPA & CEMS Accredited Gas Mixtures

Gas Distribution Systems

Technical Expertise For All Applications

Speciality Gas Supply Analysis Programs

Speciality Gas Mixtures In Multiple Cylinder Sizes

Speciality Gas Regulators For All Cylinder Types

Stainless Steel, Nickel Plated And Brass Materials

AcetyleneAirAlleneAmmoniaArgonBoronTrichlorideButaneButene 1Butene Cis 2Butene Trans 2

1.3. ButadieneCarbon DioxideCarbon MonoxideCarbonyl SulphideChlorineCyclopropaneDeuteriumDimethylamineDimethyl EtherEthaneEthyl Chloride

EthyleneHeliumHydrogenHydrogen BromideHydrogen ChlorideHydrogen SulphideHydrocarbons (C1-C10)Iso-ButaneIso ButyleneKryptonMethane

Methyl AcetyleneMethyl BromideMethyl ChlorideMethyl MercaptanMono EthylamineMono MethylamineNeonNitric OxideNitrogenNitrogen DioxideNitrous Oxide

OxygenPropanePropyleneSulphur HexafluorideSulphur DioxideTrimthylamineVinyl BromideVinyl ChlorideXenon... and more

Reduces the overall cost of calibration gas

Easily moved to new locations, reducing downtime

Maximises the efficiency of calibration gas usage

Simplifies delivery of calibration gas to multiple instruments

Adjustable as customer requirements change or increase

AVAILABLE GAS MIXTURES

The GDS-100 Gas Distribution System

HP REGULATOR

GAS CYLINDER

RIGID OR

FLEX TUBING

TUBING

OUTLET POINTS

DOCKING STATIONS

Calibration & Bump Test Stations

Bump Test Stations (Pneumatic & Electronic)

Specialised Calibration Test Stations

Gas Calibration Systems

Gas GenerationSystems

Accessories

Calibration Gas Generators For CL2 / CLO2/ H2 / HCN / H2S / NH3

Gas Mixers & Diluters For Laboratory Applications

Gas Distribution Systems

Permeation Tube Devices

Bench & Wall Mount Regulators

Gas Generators For H2 / Zero Air / N2

Product FamiliesCAC GAS supplies a complete line of calibration and speciality gas mixtures, gas generators and gas control systems. We support those product lines with the highest level of technical competence and support services.

WWW.CACGAS.COM.AU

cac@cacgas.com.au

Australia Wide 1300 CAC GAS (222 427)

International +61 2 8676 6500