leax arkivator telecom catalogue 2014 (2)

8/20/2019 Leax Arkivator Telecom Catalogue 2014 (2)

1/113

CONNECTORS • JUMPER CABLES

EMP & GROUNDING • CABLE CLAMPS

POWER SPLITTERS & TAPPERS

COMBINERS • ABSORBERS

• REPEATERS

ACTIVE DAS • PASSIVE DAS • ANTENNAS


2/1133Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com

While all efforts have been made to provide accurate specifications at time of printing, Leax Arkivator Telecom AB

is not responsible for any errors or omissions in this catalogue. All specifications are subject to change without prior

notice and neither Leax Arkivator Telecom AB nor its employees may be held responsible for discrepancies between

the printed specifications and those actually in effect at any given time. Please check actual specifications at www.arkivator.se before ordering.

© Leax Arkivator Telecom AB, Sweden

All rights reserved. 2014 Leax Arkivator Telecom AB.

INFO & ORDER: [email protected]

WEB: www.leax.com

SALES OFFICE

Ordering products from Leax ArkivatorTelecom is easy. Orders can be placed

directly via telephone or e-mail.

Visit Leax Arkivator Telecom´s websitefor updated product specifications,mounting descriptions and much more.

Leax Arkivator Telecom AB

Stridsvagnsvägen 14

SE-291 39 Kristianstad, Sweden

PHONE: +46 (0) 8 752 02 20

CONTENTS

INTRODUCTION

CONNECTORS

FEEDER & JUMPER CABLES

EMP & GROUNDING

CABLE CLAMPS

PASSIVES

COMBINERS

REPEATERS

REPEATER ANTENNAS

INDOOR ANTENNAS


3/1134 Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com

LEAX Arkivator Telecom AB is a global technology supplier servicing the

coaxial and RF industry in both the broadcasting and telecom sectors. Our

focus is to develop and manufacture the most innovative, dependable and

long-lasting products on the market.

Building on traditionAt LEAX Arkivator Telecom, our focus is on the development and manu-

facture of innovative, long-lasting RF products offering superior reli-

ability and performance at a reasonable price for the worldwide market.

Previously Teracom Components, we became Exir Telecom in 2008

after becoming part of the Exir Group. Though the brand names are

new, our products continue to be built with experience and tradition

stretching back to the first RF infrastructures to be built in Sweden.

Today our position on the worldwide market continues to grow stronger

thanks to the extensive production knowledge and manufacturing ca-

pacity available to us as part of the Exir / Arkivator Group now owned

by the LEAX Group.

Where new ideas come firstLEAX Arkivator telecom invests heavily in time and costs the develop-

ment of new ideas and products that will improve the quality and reliabil-

ity of the world’s telecom systems. An excellent example is the first ever

easy-to-use, single piece connector that we introduced back in 1998, an

innovation that revolutionized the market. By studying problems on-site

together with installers, our experienced R&D engineers excel at develop-

ing products that simplify installation, improve performance and enhance

overall system reliability.

Our PhilosophyModern communication places great demands on the systems that pro-

cess the information being exchanged throughout the world. It goes

without saying that these systems must be built with reliable products.

When developing new technology it is of the utmost importance to un-

derstand how this technology will be integrated into our everyday lives.

And to understand this, we must be close to the people who use it. It is

from this perspective that we view evolving technologies. We stay close

to our customers, the universities, the technicians using our products,

and to those using our customers’ own innovations on a daily basis. Only

with a clear understanding of the ultimate aim of the technology can we

build the finest quality products available.

Trusted around the worldAt LEAX Arkivator Telecom we work together with major international

operators, system suppliers and cable manufacturers who have used our

products ever since the telecom boom. These companies trust the per-

formance our products deliver, and we are dedicated to maintaining their

confidence while creating new, high quality products. The single piece

connector and our market leading built-in weatherproofing system are

examples of designs that save telecom customers money while provid-

ing long-term system stability.

Leax Arkivator Telecom

Introduction and

General Information



Having been around since long before the dawn of modern tele-

communications, The Exir Telecom brand offers the benefit of far-

reaching experience and in-depth knowledge.

As a customer you can benefit from our knowledge of sourcing

and manufacturing within the telecoms sector. LEAX Arkivator

Telecom offers the chance to establish a channel for service, good

quality and cost saving solutions.

Unbeatable quality and advantages

with Exir Telecom branded components.

Unrivalled Industry knowledge with

LEAX Arkivator Telecom products.



AT CABLE ENTRY

O-ring at cable entry prevents water leakage between

connector and plastic cable jacket.

BETWEEN CONNECTOR’S FRONT AND BACK PIECES

O-ring to prevent moisture migration during installation.

AROUND OUTER COPPER TUBE

Double O-rings prevent leakage between connector

and outer conductor.

INSIDE THE CONNECTOR HEAD

A leaking antenna can cause damage throughout the

system. O-rings at the connector head stop such

water leakage and protect the rest of the system

from further damage.

SILVER-PLATED CONTACT SURFACES

All contact surfaces are silver-plated to achieve

maximum conductivity.

VIBRATION RESISTANT CONSTRUCTION

The double O-rings sealing the outer conductor

provide added stability to protect against the

wear otherwise caused by cable vibrations.

HIGH CONTACT PRESSURE ON OUTER CONDUCTOR

The connector’s mechanical construction allows great

pressure to be applied to the area of contact with the

cable’s outer conductor when tightened around the

cable. A specially designed slot keeps the outer

conductor of the cable in place.

Design Features for Preventing Intermodulation

O-Ring Sealing for Guaranteed Water Protection

1

1 3

2 4

3

2

31 2

1 432

Reliable Connector Design



HOW WE STOP WATER FROM GETTING IN With simpler products there is a sizeable risk that water and moisture will

enter into the antenna system. This can occur in various ways, the most

likely of which being through poorly sealed connectors, jumper cables or

grounding kits.

External sealants do not protect against moisture that migrates within

the feeder system. Water that collects in antenna panels or amplifiers

can travel down through the system if the connector interface is not

waterproof. Should a crack or hole appear in the feeder cable’s plastic

jacket, water will enter and travel along the outer conductor to nearby

connectors. Our built-in O-ring system prevents migration of this kind

from occurring inside antenna lines.

FROM THE COLDEST TO THE WARMESTCLIMATIC CONDITIONS

Exir Telecom branded products are developed to withstand all climatic

conditions. They have been designed primarily for the harsh Scandina-

vian climate, made to function in the freezing cold of near Arctic winters.

Our products have been tested for performance in a variety of extreme

climatic conditions, from the coldest to the warmest temperatures and

at various humidity levels. They are also proven to be dust-tight and able

to withstand the pressure of desert installation.

Products branded Exir Telecom are designed to operate problem-free

for a minimum of 25 years without any maintenance or any external

sealing. Our products have built-in weather protection consisting of

O-ringsmade of EPDM. These O-rings feature completely seamless

surfaces, superior workability of the sealing under extreme climatic

actions and very good resistance to climatic changes, ozone and UV-

radiation. O-rings of this type are used in the most demanding and

highly critical applications including nuclear power plants, military

uses and various medical equipment.

As our products require no external sealing whatsoever, you will never

have to worry about the unnecessary cost, time-consumption and an-

noyance of taping ever again.

EXCEEDS IP 68The International Standards IP Protection Classification established by

IEC (International Electrotechnical Commission) provides a system for

specifying enclosures of electrical equipment on the basis of the de-

gree of protection required. In order to be awarded IP68 classification

a product must be able to withstand a water pressure of 0.1 bar for 30

minutes. This corresponds to a depth one metre of water.

Exir Telecom’s products for exposed situations have been successfully

tested to withstand 2.5 bar. This means that they can safely operate at

depths of 25 metres under water, which far exceeds the requirements of

the international IP68 standard.

SNOW AND ICE

HUMIDITY AND HEAVY RAIN

DUST AND SAND STORMS

SALT WATER AND STRONG WINDS



Keeping your workforce up to date with

the rapid advancements in today’s

mobile telephone technology requires a

commitment to continuous training.

But can you afford the time it takes for

installers to attend training courses

when there are deadlines to be met?

LEAX Arkivator Telecom recognises these pressures, which is why we have developed

a series of flexible, on-site training courses designed to fit around your work schedule

- not ours.

This increasingly popular training option minimises ’lost’ time travelling to an off-site

venue, and allows installers to conveniently update their skills at their place of work even

if the network is being constructed at several sites simultaneously. A typical connector

installation course lasts half a day and can accommodate up to eight participants.

Our on-site training scheme is actually a series of related courses which focus on

the practical aspects of working with connectors and cables. This is a vitally impor-

tant area, as incorrectly installed connectors can result in major power dissipation.

In simple terms, doing the job right the first time results in the highest level of cost

efficiency in the long run.

HANDS-ON TRAINING FOR EVERYONEAll of our instructors have extensive ’hands-on’ experience working with mobile tele-

phony networks in a variety of situations. This means they are capable of answering

questions on both a theoretical and practical level.

During our Connector Installation Course all participants are given the opportunity to

install each of the connector types available in our program. Our qualified instructors are

on hand to answer questions and to lend a helping hand when needed. They also check

each installation to ensure that it meets the required standards of workmanship.

All participants receive a personalised certificate of achievement upon successful

completion of our courses.

LEARN MORE AT LEAX ARKIVATOR TELECOM

LEAX Arkivator Telecom also holds advanced, 5-day courses geared primarily to tech-

nical supervisors, purchasers and project managers.

EXAMPLES OFCOURSES

CONNECTORINSTALLATION COURSE

Basic course covering techniquesfor proper connector installation.

INTRODUCTORY COURSE

This course provides introductory

theory and practical training relat-

ing to such areas as planning and

building fully operational antenna

lines for cellular telephony.

ADVANCED COURSE

This course offers an in-depth look

into various aspects of RF as well

as examines essential issues when

planning and building fully opera-

tional antenna lines

For more detailed information

regarding courses, please contact us.

On-site Training



CONNECTORS

Exir Telecom branded connectors offer many built-in advantages, such as an ex-

panding inner conductor for superior electrical performance, longer body construc-

tion for reduced stress on cables, and advanced weather protection features which

completely eliminate the need for putty tape or any other external weatherproofing.

The LEAX range of connectors are also fully tested and suitable for less harsh envi-

ronments and indoor applications. All of our products have been tested in extreme

climatic conditions. Our connectors are fast and easy to install, and are fully compat-

ible with all major cable brands.

Exir branded Connectors

1/2” Flexible Foam Dielectric

1/2” Flexible Foam Dielectric Right Angle

1/2” Foam Dielectric - Tighten Inner Conductor

1/2” Foam Dielectric Contact Springs

1/2” Foam Dielectric Right Angle

7/8” Foam Dielectric - Contact Springs

7/8” Foam Dielectric - Expanding Inner Conductor

1 1/4” Foam Dielectric


Tools for Foam and Superflex Connectors

LEAX branded Connectors

Connector, N Male for RGC8

Connectors, N Male for 3/8” in, FS

Connectors, 1/2” Foam Dielectric

Connectors, 7/8” Foam Dielectric

Adapter



Connectors

1/2” Superflexible Foam Dielectric

* During intermodulation measurement attached cables are exposed to shock and vibration.

NM-S012-A0 NF-S012-A0

7 16 M- S01 2-A0 7 16 F- S0 12 -A0

COMMON FOR ALL

CABLE FORMAT 1/2"

CONNECTOR OPERATING

FREQUENCY 0 - 7500 MHz

VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB

CABLE COMPATIBILITY Acome HPL 50-1/2 SF

Andrew FSJ4-50B

Cablewave S-FLC 12

Condumex RF 1/2”-50 SF

Eupen 5092 1/2” Hiflex

Leoni FlexLine 1/2” SNK Cables RFF 1/2"-50

RFS Cellflex SCF12-50J

INTERMODULATION*

2 x 20 W transmitter < -156 dBc

CONNECTING TIME 5 - 6 min

WEIGHT 190 g (0.42 lb)

DIAMETER 27 mm (1.06 in)

LENGTH 76 mm (2.99 in)

OPERATING TEMP. -55 °C to +80 °C

PIECES IN BOX 25

TOOL KIT CONK-S012-B0

ARTICLE NM-S012-A0 NF-S012-A0 716M-S012-A0 716F-S012-A0

CONNECTOR N male N female DIN 7/16 male DIN 7/16 female

PRODUCT FEATURES

Reusable

Auto-flaring for faster installation

IP68-classified and water-pressure proof tested down to 25 m

High quality O-rings on outer conductor and cable jacket ensure

functional integrity even after accidental damage to cable jacket

Designed to maintain high pressure on contact surfaces to reduce

intermodulation

Revision A



Connectors

1/2” Superflexible Foam Dielectric Right Angle


COMMON FOR ALL

CABLE FORMAT 1/2"

CONNECTOR OPERATING


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB


Andrew FSJ4-50B

Cablewave S-FLC 12



NK Cables RFF 1/2"-50RFS Cellflex SCF12-50J

INTERMODULATION*

2 x 20 W transmitter


11/113118 Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com Revision B

l i l

l i

i li i l

i l i i i l

l

i i i i

i l i

i i ll i

l

i

Connectors

1/2” Foam Dielectric - Tighten Inner Conductor


ARTICLE 00NM-F012-G1 00NF-F012-G1 716M-F012-G1 716F-F012-G1


DIAMETER 27 mm (1.06 in) 27 mm (1.06 in) 34 mm (1.34 in) 29 mm (1.14 in)

LENGTH 81.5 mm (3.21 in) 79.5 mm (3.13 in) 71 mm (2.79 in) 71 mm (2.79 in)

PRODUCT FEATURES

Reusable



No need for amalgamating tape or other external weatherproofing




intermodulation

NM-F012-G1 NF-F012-G1

7 16 M-F 01 2- G1 7 16 F- F0 12 -G1

COMMON FOR ALL

CABLE FORMAT 1/2"

CONNECTOR OPERATING


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB

CABLE COMPATIBILITY Andrew LDF4-50

NK Cables RFA 1/2” -50

Cellflex LCF 1/2” Cu2Y

RFS LCF 1/2” -50 Cu2Y

Cablewave FLC 12

Eupen 5128

Acome HPL 50- 1/2” flex

Leoni FlexLine 1/2” RCondumex RF 1/2” -50

INTERMODULATION*





PIECES IN BOX 25

TOOL-KIT CONK-F012-G0 (std.)

CONK-F012-F0 (basic)


12/11312 Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com Revision B

oam e ectr c- g ten nner on uctor

Connectors



ARTICLE 00NM-F012-H1 00NF-F012-H1 716M-F012-H1 716F-F012-H1


DIAMETER 27 mm (1.06 in) NM 27 mm (1.06 in) NF 34 mm (1.34 in) 7/16m 29 mm (1.14 in) 7/16f

LENGTH 68 mm (2.68 in) NM 66 mm (2.60 in) NF 57 mm (2.25 in) 7/16m 55 mm (2.17 in) 7/16f

PRODUCT FEATURES

Reusable


No need for tape or other external weatherproofing




Designed to maintain high pre sure on contact surfaces to reduce

intermodulation

NM-F012-H1 NF-F012-H1

7 16 M-F 01 2- H1 7 16 F- F0 12 -H1

COMMON FOR ALL

CABLE FORMAT 1/2"

CONNECTOR OPERATING


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB


NK Cables RFA 1/2” -50


RFS LCF 1/2” -50 Cu2Y

Cablewave FLC 12

Eupen 5128

Acome HPL 50- 1/2” flex

Leoni FlexLine 1/2” RCondumex RF 1/2” -50

INTERMODULATION*





PIECES IN BOX 25

TOOL-KIT CONK-F012-H0 (std.)




Connectors

1/2” Foam Dielectric Right Angle

PRODUCT FEATURES

Reusable







intermodulation


COMMON FOR ALL

CABLE FORMAT 1/2"CONNECTOR OPERATINGFREQUENCY 0 - 7500 MHz

VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB


NK Cables RFA 1/2"-50

Cellflex LCF 1/2" Cu2Y

RFS LCF 1/2"-50 Cu2Y

Cablewave FLC 12

Eupen 5128

Acome HPL 50-1/2” flex

Leoni FlexLine 1/2” R

Condumex RF 1/2”-50

INTERMODULATION*





LENGTH 60 mm (2.36 in)

WITH 49.5 mm (1.95 in)


PIECES IN BOX 25

TOOL-KIT CONK-F012-G0 (std.)


ARTICLE 00NM-FO12-AI00 716M-F012-AI00

CONNECTOR N male right angle DIN 7/16 male right angle

00NM-FO12-AI00 716M-F012-AI00

Revision A



Connectors


PRODUCT FEATURES

Reusable




High quality O-rings on outer conductor and cable jacket ensurefunctional integrity even after accidental damage to cable jacket


intermodulation


COMMON FOR ALL

CABLE FORMAT 7/8"

CONNECTOR OPERATINGFREQUENCY 0 - 7500 MHz

VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB

CABLE COMPATIBILITY Acome HPL 50-7/8” flex

Acome HPL 50-7/8” LA

Acome M5423 7/8 UP

Andrew AVA5-50

Andrew LDF5-50A

Cablewave FLC 78


Cellflex LCF78-50JA


Eupen 5228

Eupen 5228A EC5-50A


NK Cables RF 7/8"-50

NK RFA 7/8”Tsvetlit PK50-22-39-C 7/8"R

HANSEN 7/8"

INTERMODULATION*




DIAMETER 39.5 mm (1.56 in)


PIECES IN BOX 25

TOOL KIT CONK-F078-AJ00

ARTICLE 00NM-F078-AF00 00NF-F078-AF00 716M-F078-AF00 716F-F078-AF00



00NM-F078-AF00 00NF-F078-AF00

716M-F078-AF00 716F-F078-AF00

Revision B



Connectors

7/8” Foam Dielectric - Expanding Inner Conductor

PRODUCT FEATURES

Reusable

Expanding inner conductor




High quality O-rings on outer conductor and cable jacket ensurefunctional integrity even after accidental damage to cable jacket


intermodulation


COMMON FOR ALL

CABLE FORMAT 7/8"


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB



Acome M5423 7/8 UP

Andrew AVA5-50

Andrew LDF5-50A

Cablewave FLC 78


Cellflex LCF78-50JA


Eupen 5228

Eupen 5228A EC5-50A



NK RFA 7/8”Tsvetlit PK50-22-39-C 7/8"R

HANSEN 7/8"

INTERMODULATION*




DIAMETER 39.5 mm (1.56 in)


PIECES IN BOX 25

TOOL KIT CONK-F078-AJ00

ARTICLE 00NM-F078-AG00 00NF-F078-AG00 716M-F078-AG00 716F-F078-AG00



00NM-F078-AG00 00NF-F078-AG00

716M-F078-AG00 716F-F078-AG00

Revision B



Connectors


PRODUCT FEATURES

Reusable







intermodulation


COMMON FOR ALL

CABLE FORMAT 1 1/4"


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB

CABLE COMPATIBILITY Acome HPL 50-1 1/4 flex

Andrew LDF6-50

Cablewave FLC 114

Cellflex LCF 1 1/4” Cu2Y

Condumex RF 1 1/4”-50

Eupen 5328

Eupen Hiflex EC6-50-HF

Leoni FlexLine 1 1/4” RNK Cables RFA 1 1/4"-50

RFS LCFS114-50JA

INTERMODULATION*




DIAMETER 51 mm (2 in)


PIECES IN BOX 20

TOOL KIT CONK-F114-AB00

ARTICLE 00NM-F114-AD00 00NF-F114-AD00 716M-F114-AD00 716F-F114-AD00


LENGTH 110 mm (4.33 in) NM 108 mm (4.25 in) Nf 98 mm (3.86 in) 7/16m 97 mm (3.82 in) 7/16f

00NM-F114-AD00 00NF-F114-AD00

716M-F114-AD00 716F-F114-AD00

Revision A



Connectors


PRODUCT FEATURES

Reusable







intermodulation


COMMON FOR ALL

CABLE FORMAT 1 5/8"


VSWR / RETURN LOSS

0 - 2000 MHz 1.036 / -35 dB

0 - 2500 MHz 1.065 / -30 dB

CABLE COMPATIBILITY Acome HPL 50-158 flex

Andrew AVA7-50

Andrew LDF7-50A

Cablewave FLC 158

Cellflex LCF 1 5/8" Cu2Y

Condumex RF 1 5/8”-50

Leoni FlexLine 1 5/8” RNK Cables RFA 1 5/8"-50

RFS LCF158-50JA

INTERMODULATION*



WEIGHT 1100 g (2.42 lb)



PIECES IN BOX 10

TOOL KIT CONK-F158-AC00

ARTICLE 00NM-F158-AD00 00NF-F158-AD00 716M-F158-AD00 716F-F158-AD00



00NM-F158-AD00 00NF-F158-AD00

716M-F158-AD00 716F-F158-AD00

Revision A



PRODUCT PROFILE

The Exir telecom branded tool kits are designed to enable fast instal-

lation of our connectors. Tools can be ordered separately or in kits. All

connectors and tool kits are delivered with illustrated mounting instruc-

tions. We also offer courses in connector installation.

Cable Preparation Tools

for Cable Connectors

ARTICLE KIT-BAG CONTENTS CONNECTORSCONK-S012-B0 Cable peeler, cable holders, inner conductor tightener (with torque) and flaring tool, open

wrenches, wrench for N and DIN 7/16, silicone gasket protector, N to DIN 7/16 adapter, brush.

xxxx-S012-A0

xxxx-716M-S012-B0

CONK-F012-G0Standard Cable peeler, cable holders, inner conductor tightener (with torque) and flaring tool,

open wrenches, wrench for N and DIN 7/16, N to DIN 7/16 adapter, brush.

xxxx-F012-G1

xxxx-F012-AH00

xxxx-F012-AI00

CONK-F012-H0Standard Cable peeler, cable holders, flaring tool, open wrenches, wrench for N and DIN 7/16, brush. xxxx-F012-H1

CONK-F012-F0Basic

Cable peeler, inner conductor tightener, N to DIN 7/16 adapter.

xxxx-F012-G1

xxxx-F012-H1

xxxx-F012-AH00

xxxx-F012-AI00

CONK-F078-AJ00Standard Cable peeler, cable holders, open wrenches, wrench for N and DIN 7/16, brush,

razor blades, inner conductor tightener 7/16, N to DIN 7/16 adapter.

xxxx-F078-AE02

xxxx-F078-AF00

xxxx-F078-AG00

CONK-F078-G0Basic

Cable peeler, inner conductor tightener, N to DIN 7/16 adapter.

xxxx-F078-AE02xxxx-F078-AF00

xxxx-F078-AG00

CONK-F114-AB00 Cable peeler, cable holders, hook spanners, wrench for N and DIN 7/16, brush, cutting jig. xxxx-F114-AD00

CONK-F158-AC00 Cable peeler, cable holders, hook spanners, wrench for N and DIN 7/16, brush, cutting jig. xxxx-F158-AD00

Revision A



Tools

Tools for Foam and Superflex Connectors

CABLE PEELER

PEEL-S012-B0 1/2” flexible

PEEL-F012-F0 1/2”

PEEL-F078-G0 7/8”

PEEL-F114-A0 1 1/4”

PEEL-F158-A0 1 5/8”

OPEN WRENCHES

OCST-S012-A1 1/2” flexible

OCST-F012-H0 1/2” H1

OCST-S012-A1 1/2” G1OCST-F078-B0 7/8”

INNER CONDUCTORSTRAINERS AND FLARING TOOLS

ISFL-S012-B0 1/2” flexible

FLAT-F012-H0 1/2” H1

ISFL-F012-B0 1/2” G1

ICST-7160-C0* 7/16 without torque

SPANNERS

014-51510 1 1/4” and 1 5/8”

CABLE HOLDERS

CABH-0012-A1 1/2” flexible

CABH-F012-A1 1/2”

CABH-0078-A1 7/8”

CABH-0114-A1 1 1/4”

CABH-0158-A1 1 5/8”

WRENCH

OCST-N716-A1 N and DIN 7/16”

ADAPTER

ICST-000N-A1 N to DIN 7/16”

SILICONE GASKET PROTECTOR

CONT-S012-A1 1/2” flexible

SILICONE GREASE

014-54502 Silicone grease

BRUSH

014-54500 Plastic brush

RAZOR BLADES

014-54503 Big for 7/8”10 pieces

014-54504 Small for

1/2”, 1 1/4”, 1 5/8”

CUTTING JIGS

CJIG-F114-A1 1 1/4”

CJIG-F158-A1 1 5/8”

Revision A


20/113Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com22

Connectors

N Male for RGC8

COMMON FOR ALL 716M-RGC8-BA00

IMPEDANCE 50 Ohm

INSERTION LOSS ≤ 0.05×√F(GHz) dB

VSWR / RETURN LOSS

824 - 960 MHz ≤ -24.3 dB (1.13)

1710 - 2690 MHz ≤ -23.1 dB (1.15)

INTERMODULATION

3rd order < -155 dBc (112 dBm)

3rd order test method Two +43 dBm Carriers

OPERATING TEMPERATURE -55 °C to +85 °C

CONTACT ATTACHMENT

Outer Crimp

Inner Solder

Revision A


21/113Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com 23

Connectors

N Male for 3/8” in, FS

COMMON FOR ALL 716M-F038-BA00

CABLE FORMAT 50 Ohm

IMPEDANCE 3/8”

INSERTION LOSS ≤ 0.05×√F(GHz) dB

VSWR / RETURN LOSS

824 - 960 MHz ≤ -28.3 dB (1.08)

1710 - 2690 MHz ≤ -26.5 dB (1.10)

INTERMODULATION

3rd order < -155 dBc (112 dBm)



Revision A



Connectors

1/2” Foam Dielectric

PRODUCT FEATURES

Reusable


High quality O-rings


intermodulation

COMMON FOR ALL

CABLE FORMAT 1/2"

VSWR / RETURN LOSS

0 - 2700 MHz 1.10 / -26.5 dB


NK Cables RFA 1/2"-50

Cellflex LCF 1/2" Cu2Y

RFS LCF 1/2"-50 Cu2Y

Cablewave FLC 12

Eupen 5128

Acome HPL 50-1/2” flex



INTERMODULATION*



DIAMETER


ARTICLE 00NM-F012-BA00 00NM-F012-BA00 716M-F012-BA00 716F-F012-BA00

CONNECTOR N male N female DIN 7/16 male DIN 7/16 femaleLENGTH ??? mm (in) ??? mm (in) 50 mm (1.97 in) ?? (?? in)

WEIGHT ??? mm (in) ??? mm (in) 118 g (0.26 lb) 104 g (0.23 lb)

Revision A


00NM-F012-BA00 00NF-F012-BA00

716M-F012-BA00 716F-F012-BA00


23/113Leax Arkivator Telecom AB P +46 8 752 02 20 [email protected] www.leax.com 21Revision A

Connectors

7/8” Foam Dielectric

PRODUCT FEATURES

Reusable


High quality O-rings


intermodulation

COMMON FOR ALLCABLE FORMAT 7/8"

VSWR / RETURN LOSS

0 - 2700 MHz 1.10 / -26.5 dB



Acome M5423 7/8 UP

Andrew AVA5-50

Andrew LDF5-50A

Cablewave FLC 78


Cellflex LCF78-50JA


Eupen 5228

Eupen 5228A EC5-50A



NK RFA 7/8”

Tsvetlit PK50-22-39-C 7/8"R

HANSEN 7/8"

INTERMODULATION*





ARTICLE 00NM-F078-BA00 00NM-F078-BA00 716M-F078-BA00 716F-F078-BA00

CONNECTOR N male N female DIN 7/16 male DIN 7/16 femaleLENGTH ??? ??? 57 mm (2.24 in)

WEIGHT ??? ??? 195 g (0.43 lb)


00NM-F078-BA00 00NF-F078-BA00

716M-F078-BA00 716F-F078-BA00



Adapter

Revision A

ELECTRICAL CHARACTERISTICS

FREQUENCY RANGE 824 - 960 & 1710 - 2690 MHz

IMPEDANCE 50 Ohm

INSERTION LOSS

0 - 3000 MHz < 0.1 dB

RETURN LOSS/VSWR

0 - 3000 MHz < 32 dB (1.05)

INTERMODULATION

3rd order ≤ -155 dBc (112 dBm) @ 910 MHz



SEALING O-ring

PLATING Silver-plated

ARTICLE NO

7/16M-7/16M 716M-716M-BA00

7/16F-7/16F 716F-716F-BA00

7/16M-7/16F 716M-716F-BA00

7/16M-NF 716M-00NF-BA00

7/16M-NM 716M-00NM-BA00

7/16F-NF 716F-00NF-BA00

7/16F-NM 716F-00NF-BA00

NF-NF 00NF-00NF-BA00

NM-NM 00NM-00NM-BA00

NF-NF 00NM-00NF-BA00



FEEDER & JUMPER CABLES

The LEAX branded feeder cable range provides a very good standard feeder cable

solution. These cables are cased in black polyethylene and as usual very well posi-

tioned price wise.

Exir Telecom branded jumper cables are water-pressure proof down to 25 meters,

which is equivalent to a pressure of 2.5 bar and far exceeds the requirements for IP68-

classification. Consequently there is no need for tape or any other external weather-

proofing. All jumper cables are available in any length and offer a generous bending

radius. Every cable is tested and can as an option come individually labeled with the re-

sults to identify its measured return loss performance within the 0-3000 MHz range.

LEAX branded Feeder Cables

RG8 Link Cable

Feeder Cable, Foam Coaxial Cable, 3/8” in, Black PE Jacket



Exir branded Jumper Cables

1/2” Foam Dielectric Cable

1/2” Superflexible Foam Dielectric Cable

1/2” Superflexible Foam Dielectric Cable - Angle Connector

LEAX branded Jumper Cables





PRODUCT STRUCTURE

DESIGNATION MATERIAL DIAMETER (mm)

1 Inner Conductor Copper clad aluminium 2.74±0.025

2 Dielectric Foam Polyethylene 7.24±0.13

3 Outer Conductor Bonded aluminum foil --

3 Outer Conductor Tinned copper wire braid Nom. 8.13

4 Jacket Blac polyethylene, PE 10.16±0.2

RG8 Link Cable

ELECTRICAL FEED-F0R8-AA00

IMPEDANCE 50 Ohm

RETURN LOSS/VSWR

5 - 3000 MHz ≤ 1.20

MAX OPERATING VOLTAGE 3.0

VELOCITY 85%

CAPACITANCE Nom. 78

INSULATION RESISTANCE 5000

SCREENING EFFECTIVENESS 90

ENVIRONMENTAL

OPERATING TEMPERATURE -40°C ~ +80°C

BENDING RADIUS ONCE 25

REPEATED BENDING RADIUS 76

FLEXIBLE APPLICATION RADIUS 102

COMPLIANCY RoHS

ATTENUATION @ 20°C AND SEA LEVEL

FREQUENCY (MHZ) ATTENUATION (DB/100M)

140 6.0

350 9.0

900 15.0

1800 20.0

1900 21.0

2500 25.0

3000 28.0

4000 34.0

5000 38.0

6000 42.0

Revision A



Feeder Cable

Foam Coaxial Cable, 3/8” in, Black PE Jacket

ELECTRICAL FEED-F038-AA00

IMPEDANCE 50 Ohm

RETURN LOSS

824 - 960 MHz ≤ -24.3 (1.13)

1710 - 2170 MHz ≤ -24.3 (1.13)

MAX OPERATING FREQUENCY 13000 MHz

VELOCITY 88 %

CAPACITANCE 76 pF/m

PASSIVE INTER-MODULATION ≤ -155 dBc @ 2 x 20W (43dBm)

RF PEAK POWER RATING ≥ 15.6 KW

RF PEAK VOLTAGE ≥ 4000 V

JACKET SPARK TEST (RMS) ≥ 5000 V

DIELECTRIC RESISTANCE ≥ 5000 MOhm / Km

MECHANICAL

MIN BEND RADIUS, MULTIPLE BENDS 95 mm

MIN BEND RADIUS, SINGLE BEND 40 mm

BENDING MOMENT 1.9 Nm

TENSILE STRENGTH ≥ 1100 N

ENVIRONMENTAL


INSTALLATION TEMPERATURE -40°C ~ +60°C

STORAGE TEMPERATURE -70°C ~ +85°C

RELATIVE HUMIDITY 0 ~ 95%

COMPLIANCY ROHS 2002/95/EC

ATTENUATION AND AVERAGE POWER

FREQUENCY (MHZ) ATTENUATION (DB/100M) AVERAGE POWER (KW)

450 MHZ 7.52 1.03

824 MHZ 10.40 0.74

960 MHZ 11.30 0.68

1000 MHZ 11.56 0.67

1800 MHZ 16.00 0.48

2000 MHZ 16.97 0.45

2200 MHZ 17.91 0.43

2500 MHZ 19.26 0.40

2700 MHZ 20.13 0.38

Revision A

PRODUCT STRUCTURE


1 Inner Conductor Copper clad aluminum wire 3.30±0.05

2 Dielectric Physical Foam Polyethylene 8.30±0.20

3 Outer Conductor Corrugated copper tube 9.60±0.25

4 Jacket Black polyethylene, PE 11.20±0.30



Feeder Cable



IMPEDANCE 50 Ohm

RETURN LOSS

824 - 960 MHz ≤ -24.3 (1.13)

1710 - 2170 MHz ≤ -24.3 (1.13)


VELOCITY 88 %

CAPACITANCE 76 pF/m


RF PEAK POWER RATING ≥ 40 KW



DIELECTRIC RESISTANCE ≥ 5000 MOhm / Km

MECHANICAL





ENVIRONMENTAL








450 MHZ 4.75 1.61

824 MHZ 6.56 1.16

960 MHZ 7.12 1.07

1000 MHZ 7.28 1.05

1800 MHZ 10.06 0.76

2000 MHZ 10.67 0.72

2200 MHZ 11.25 0.68

2500 MHZ 12.09 0.63

2700 MHZ 12.63 0.60

Revision A

PRODUCT STRUCTURE


1 Inner Conductor Copper clad aluminum wire 4.80±0.03


3 Outer Conductor Regular corrugated copper tube 13.90±0.25




Feeder Cable



IMPEDANCE 50 Ohm

RETURN LOSS

824 - 960 MHz ≤ -24.3 (1.13)

1710 - 2170 MHz ≤ -24.3 (1.13)


VELOCITY 88 %

CAPACITANCE 76 pF/m


RF PEAK POWER RATING ≥ 91 KW



DIELECTRIC RESISTENCE ≥ 5000 MOhm / KM

MECHANICAL





ENVIRONMENTAL








450 MHZ 2.44 3.44

824 MHZ 3.38 2.49

960 MHZ 3.67 2.29

1000 MHZ 3.76 2.24

1800 MHZ 5.21 1.61

2000 MHZ 5.53 1.52

2200 MHZ 5.83 1.44

2500 MHZ 6.27 1.34

2700 MHZ 6.55 1.28

Revision A

PRODUCT STRUCTURE


1 Inner Conductor Copper tube 8.90±0.10


3 Outer Conductor Regular corrugated copper tube 24.90±0.30




Jumper Cables

1/2” Foam Dielectric Cable

PRODUCT FEATURES

10-year comprehensive warranty




intermodulation

Each cable individually tested an labelled with return loss graph,

0 - 2200 MHz

* Typical return loss connecto r.** During intermodulation measurement attached cables are exposed to shock and vibration.

*** XX is the length of the cable. For example: AB05=0.5 m, AB10=1.0 m.

DIN 7/16 TO DIN 7/16

ARTICLE CONNECTORS

JBB0-F012-ABxx*** DIN 7/16 male to DIN 7/16 male

JAB0-F012-ABxx DIN 7/16 female to DIN 7/16 male

DIN 7/16 TO N

ARTICLE CONNECTORS

JBD0-F012-ABxx DIN 7/16 male to N male

JAD0-F012-ABxx DIN 7/16 female to N male

N TO N

ARTICLE CONNECTORS

JDD0-F012-ABxx N male to N male

JCD0-F012-ABxx N female to N male

COMMON FOR ALL

CABLE TYPE 1/2"

FREQUENCY RANGE 0 - 5000 MHz

VSWR / RETURN LOSS

0 - 1000 MHz 1.08 / -28 dB (-35 dB)*

1000 - 2200 MHz 1.10 / -26 dB (-35 dB)*

INTERMODULATION**



Revision A



Jumper Cables


PRODUCT FEATURES

Each cable individually tested




Designed to maintain high pressure on contact surfacces to reduce

intermodulation

* Typical performance for jumpers of ordinary length.

** During intermodulation measurement, cables were exposed to shock and vibration.

*** XX is the length of the cable. For example: AC05=0.5 m, AC10=1.0 m.

COMMON FOR ALL

CABLE TYPE 1/2" Superflex


VSWR / RETURN LOSS

0 - 2700 MHz 1.12 / -25 dB*

INTERMODULATION**




ARTICLE CONNECTORS

JBB0-S012-ACxx*** DIN 7/16 male to DIN 7/16 male

JAB0-S012-ACxx DIN 7/16 female to DIN 7/16 male

DIN 7/16 TO N

ARTICLE CONNECTORS

JBD0-S012-ACxx DIN 7/16 male to N male

JBC0-S012-ACxx DIN 7/16 male to N female

N TO N

ARTICLE CONNECTORS

JDD0-S012-ACxx N male to N male

JCC0-S012-ACxx N female to N female

Revision A



Jumper Cables

1/2” Superflexible Foam Dielectric Cable- Angle Connector Angle Connector

PRODUCT FEATURES

Each cable individually tested


Outstanding VSWR and IM values



COMMON FOR ALL



VSWR / RETURN LOSS

0 - 2700 MHz 1.12 / -25 dB*

INTERMODULATION**





*** XX is the length of the cable. For example: AC05=0.5 m, AC10=1.0 m.


Revision C


ARTICLE CONNECTORS

JBA1-S012-ACxx*** DIN 7/16 male angle to DIN 7/16 female

JBB1-S012-ACxx DIN 7/16 male angle to DIN 7/16 male

DIN 7/16 TO N

ARTICLE CONNECTORS

JBC1-S012-ACxx DIN 7/16 male angle to N female

JBD1-S012-ACxx DIN 7/16 male angle to N male

JDA1-S012-ACxx DIN 7/16 female to N male angle

JDB1-S012-ACxx DIN 7/16 male to N male angle

N TO N

ARTICLE CONNECTORS

JDC1-S012-ACxx N male angle to N female

JDD1-S012-ACxx N male angle to N male



Jumper Cables


* Typical return loss connecto r.** During intermodulation measurement attached cables are exposed to shock and vibration.

*** XX is the length of the cable. For example: BA05=0.5 m, BA10=1.0 m.

Revision C

PRODUCT FEATURES



intermodulation

COMMON FOR ALL



VSWR / RETURN LOSS

0 - 2700 MHz 1.12 / -25 dB*

INTERMODULATION**





ARTICLE CONNECTORS

JBB0-S012-BAxx*** DIN 7/16 male to DIN 7/16 male

JAB0-S012-BAxx DIN 7/16 female to DIN 7/16 male

DIN 7/16 TO N

ARTICLE CONNECTORS

JBD0-S012-BAxx DIN 7/16 male to N male

JBC0-S012-BAxx DIN 7/16 male to N female

N TO N

ARTICLE CONNECTORS

JDD0-S012-BAxx N male to N male

JCC0-S012-BAxx N female to N female



Jumper Cables

1/2” Superflexible Foam Dielectric Cable- Angle Connector Angle Connector

PRODUCT FEATURES



intermodulation

COMMON FOR ALL



VSWR / RETURN LOSS

0 - 2700 MHz 1.12 / -25 dB*

INTERMODULATION**





*** XX is the length of the cable. For example: BA05=0.5 m, BA10=1.0 m.

Revision C



ARTICLE CONNECTORS

JBA1-S012-BAxx*** DIN 7/16 male angle to DIN 7/16 female JBB1-S012-BAxx DIN 7/16 male angle to DIN 7/16 male

DIN 7/16 TO N

ARTICLE CONNECTORS

JBC1-S012-BAxx DIN 7/16 male angle to N female

JBD1-S012-BAxx DIN 7/16 male angle to N male

JDA1-S012-BAxx DIN 7/16 female to N male angle

JDB1-S012-BAxx DIN 7/16 male to N male angle

N TO N

ARTICLE CONNECTORS

JDC1-S012-BAxx N male angle to N female

JDD1-S012-BAxx N male angle to N male



EMP & GROUNDING

Exir Telecom branded EMP protectors and grounding kits protect telecom sites

from lightning strikes and surges that damage equipment and cause system

breakdown. The products have been tested with a lightning pulse of 50 kA,

10/350 ms, and have passed without sustaining any damage or loss of perfor-

mance.

Thanks to our O-ring protection system, the grounding kits are water-pressure

proof down to 25 metres, which is equivalent to a pressure of 2.5 bar and far ex-

ceeds the requirements for IP68-classification. Consequently there is no need

for tape or any other external weatherproofing.

Exir branded EMP & Grounding

EMP Protectors, Triple Band

EMP Protectors, Gas discharge tube, DC-3000 MHz

EMP Protectors, Short circuit, 750 - 3000 MHz

Grounding Kits, Lightning Protection for Foam Dielectric Cables

Tool Kits

Grounding Kit, Lightning Protection for 1/2” Superflexible Foam Dielectric Cable

External Grounding Kits - Lightning Protection for Connectors



EMP Protectors

Triple Band

PRODUCT FEATURES


Designed to maintain high pressure oncontact surfaces to reduce

intermodulation



MOUNTING BRACKET

The EMP protector is available with

grounding bracket for mounting di-

rectly on grounding bars on request.


COMMON FOR ALL


1710 - 2170 MHz

VSWR / RETURN LOSS

806 - 890 MHz 1.17 / -22 dB

890 - 960 MHz 1.12 / -25 dB

1710 - 2200 MHz 1.12 / -25 dB

INTERMODULATION*

2 x 20 W Tx < -156 dBc

IMPEDANCE 50 ohmSURGE CURRENT 100 kA

HANDLING CAPABILITY (test pulse 8/20 µs)

ENERGY test pulse 4 kV 1.2/50 µs

test pulse 2 kA 8/20 µs


DIMENSIONS 30 x 40 x 110 mm

H x W x D (1.17 x 1.56 x 4.29 in)


PIECES IN BOX 25

ARTICLE EMPP-0822-AA00 EMPP-0822-AB00 EMPP-0822-AC00 EMPP-0822-AD00

CONNECTORS DIN 7/16 female to RX/TX - DIN 7/16 male to RX/TX - N female to RX/TX - N male to RX/TX -

DIN 7/16 male to antenna DIN 7/16 female to antenna N male to antenna N female to antenna

INPUT POWER 600 W 600 W 150 W 150 W

EMP Protectors, Triple Band

Revision A



EMP Protectors

Gas discharge tube, DC - 3000 MHz

COMMON FOR ALL

FREQUENCY RANGE DC - 3000 MHz

VSWR / RETURN LOSS 1.22 / -20 dB

IMPEDANCE 50 ohm

DISCHARGE VOLTAGE 230 or 90 V*

IMPULSE DISCHARGE CURRENT

1 impulse (8/20 µs) 20 kA

5 impulses (8/20 µs) in 3 min 10 kA

IMPULSE SPARK OVER VOLTAGE



EMP Protectors

Short circuit, 750 - 3000 MHz

PRODUCT FEATURES

Made of silver-plated brass

Protected from both ways





intermodulation


COMMON FOR ALL



INTERMODULATION*

2 x 20 W Transmitter < -156 dBc

IMPEDANCE 50 ohm

SURGE CURRENT 100 kA

HANDLING CAPABILITY Test pulse 8/20 µs

ENERGY test pulse 4 kV 1.2/50 µs

test pulse 2 kA 8/20 µs

WEIGHT 400 g


H x W x D (4.44 x 1.33 x 1.33 in)


ARTICLE EMPP-0830-AK00 EMPP-0830-AM00 EMPP-0830-AL00

CONNECTOR 7/16 f - 7/16 M Nf - Nm 7/16 f - 7/16 f

INPUT POWER 600 W 150 W 600 W

Revision B

EMP Protectors, Short circuit, 750 - 3000 MHz



Grounding Kits

Lightning Protection for Foam Dielectric Cables

ARTICLE GROU-F012-AB00 GROU-F078-AB00 GROU-F114-AB00 GROU-F158-AB00

CABLE COMPATIBILITY Andrew LDF4-50 Acome HPL 50-7/8” flex Acome HPL 50-1 1/4 flex Acome HPL 50-158 flex

NK Cables RFA 1/2"-50 Acome HPL 50-7/8” LA Andrew LDF6-50 Andrew AVA7-50

Cellflex LCF 1/2" Cu2Y Acome M5423 7/8 UP Cablewave FLC 114 Andrew LDF7-50A

RFS LCF 1/2"-50 Cu2Y Andrew AVA5-50 Cellflex LCF 1 1/4” Cu2Y Cablewave FLC 158

Cablewave FLC 12 Andrew LDF5-50A Condumex RF 1 1/4”-50 Cellflex LCF 1 5/8" Cu2Y

Eupen 5128 Cablewave FLC 78 Eupen 5328 Condumex RF 1 5/8”-50

Acome HPL 50-1/2” flex Cellflex LCF 7/8” Cu2Y Eupen Hiflex EC6-50-HF Leoni FlexLine 1 5/8” R

Leoni FlexLine 1/2” R Cellflex LCF78-50JA Leoni FlexLine 1 1/4” R NK Cables RFA 1 5/8"-50Condumex RF 1/2”-50 Condumex RF 7/8”-50 NK Cables RFA 1 1/4"-50 RFS LCF158-50JA

Eupen 5228 RFS LCFS114-50JA

Eupen 5228A EC5-50A



NK RFA 7/8”

Tsvetlit PK50-22-39-C 7/8"R

HANSEN 7/8"

GROUND CONN. Cable clip, M5 Cable clip, M5 Cable clip, M5 Cable clip, M5

DIMENSIONS 50 x 25 x 32 mm 50 x 32 x 43 mm 50 x 43 x 57 mm 52 x 54 x 68 mm

H x W x D (front view) (1.97 x 0.98 x 1.26 in) (1.97 x 1.26 x 1.69 in) (1.97 x 1.69 x 2.24 in) (2.05 x 2.13 x 2.68 in)

CONTACT AREA >25 mm² (0.04 in²) >25 mm² (0.04 in²) >25 mm² (0.04 in²) >25 mm² (0.04 in²)

WEIGHT 242 g (0.53 lb) 306 g (0.66 lb) 424 g (0.94 lb) 556 g (1.23 lb)

CABLE LENGTH 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in)

OPERATING TEMP. -55 °C to +80 °C -55 °C to +80 °C -55 °C to +80 °C -55 °C to +80 °C

TOOL KITS CPKI-0000-C0 CPKI-0000-C0 CPKI-0000-C0 CPKI-0000-C0

Grounding Kits, Lightning Protectionfor Foam Dielectric Cables

Revision A

PRODUCT FEATURES

Reusable

Fast and easy installation

Large contact surface area

Fits multiple cable brands




PRODUCT PROFILE

Our Exir Telecom branded grounding kits feature an efficient design enabling multiple units

to be mounted very close together. A simple, adjustable construction allows for easy attach-

ment to a wide range of cables from various manufacturers. These grounding kits are reusable

and 100% weatherproof without the need for tape or any other external weatherproofing.

The contact surfaces are designed to closely fit the corrugated surface of the outer con-

ductor, thus avoiding unnecessary pressure. As a result, the effect of grounding on the

VSWR measurement of the antenna line is barely detectable.



Tool Kits

Mounting Grounding Kits

PRODUCT PROFILE

The Exir Telecom branded tool kits provide installers all they

need for installing grounding kits quickly and easily. Our ground-

ing devices require only one small opening in the cable jacket in

order to function properly. The opening is made using a hot tip

cutting tool together with a simple template. Fully illustrated

instructions are included with every grounding kit.

The complete tool kit includes a cordless, butane powered

cutting tool, one spare tip and templates. Additional cutting

tools and templates can be ordered separately as needed.

Note: The above photos illustrate the general installation procedure. Please visit www.exirtelecom.com for complete instructions on how toinstall grounding kits from Exir Telecom.

COMPLETE TOOL KIT

ARTICLE CONTENTS

CPKI-0000-C1 Cordless, butane powered cutting tool, spare tip and

templates for 1/2”, 7/8”, 1 1/4” and 1 5/8” cables.

SINGLE TOOLS

ARTICLE CONTENTS

EJIG-F012-A0 Template for 1/2” cable

EJIG-F078-A0 Template for 7/8” cable

GTEM-F114-AA00 Template for 1 1/4” cable

GTEM-F158-AA00 Template for 1 5/8” cable

014-12015 Cordless, butane powered cutting tool with spare tip

1 2 3

4 5 6

Tool Kits

Revision A



Grounding Kit, Lightning Protection for 1/2” Superflexible Foam

Dielectric Cable

Grounding Kit

Lightning Protection for 1/2” Superflexible Foam Dielectric Cable

ARTICLE GROU-S012-AA00


Andrew FSJ4-50B

Cablewave S-FLC 12



Leoni FlexLine 1/2” S

NK Cables RFF 1/2”-50

RFS Cellflex SCF12-50J

GROUND CONN. Cable clip, M5

CONTACT AREA >20 mm² (0.44 in²)



H x W x D (0.71 x 1.06 x 1.34 in)

CABLE LENGTH 600 mm (23.64 in)


Revision A

PRODUCT FEATURES

Reusable



Fits multiple cable brands


PRODUCT PROFILE

Exir Telecom branded grounding kits feature an efficient design enabling

multiple units to be mounted very close together. A simple, adjustable

construction allows for easy attachment to a wide range of cables from

various manufacturers. These grounding kits are reusable.

The contact surfaces are designed to closely fit the corrugated surface

of the outer conductor, thus avoiding unnecessary pressure. As a result,

the effect of grounding on the VSWR measurement of the antenna line

is barely detectable.



External Grounding Kits

Lightning Protection for Connectors

ARTICLE EXGR-F012-AA00 EXGR-F078-AA00 EXGR-F114-AA00 EXGR-F158-AA00

CONNECTOR xxxx-F012-G1 xxxx-F078-AE02 xxxx-F114-AD00 xxxx-F158-AD00

COMPATIBILITY xxxx-F012-H1 xxxx-F078-AF00

xxxx-F078-AG00

CONTACT AREA >25 mm2 (0.04 in2) >25 mm2 (0.04 in2) >25 mm2 (0.04 in2) >25 mm2 (0.04 in2)

CABLE LENGTH 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in) 600 mm (23.64 in)

OPERATING TEMP. -55 °C to +80 °C -55 °C to +80 °C -55 °C to +80 °C -55 °C to +80 °C

PIECES IN BOX 50 50 50 50

PRODUCT FEATURES

Reusable

Non-corrosive




Made of silver-plated brass and stainless steel



PRODUCT PROFILEThe external grounding kit is designed to be mounted around the connector

and to cause the connector itself to function as a grounding device.

This solution is very easy to install and provides extra protection at the

feeder connector.

Revision A

External Grounding Kits

Lightning Protection for Connectors



CABLE CLAMPS

Exir Telecom branded cable clamps make cable installation easier, saving you

valuable time. Moreover, they provide protection from the damage that high

winds inflict upon improperly fastened cables damage that may lead to in-

creased reflection due to mechanical stress. Our cable clamps are manufactured

of corrosion resistant stainless steel and are designed to achieve a perfect dis-

tribution of pressure on cables.

We offer cable clamps for use with flat, round and angle tower members, as well

as for wall attachment. Our clamps are convenient to carry and easy to mount

- features your installers will appreciate.

Exir branded Cable Clamps

Cable Clamps for Flat (1.5 - 23 mm) and Round (8 - 23 mm) Tower Members

Cable Clamps for 40 mm Angle Tower Members

Cable Clamp Single

Cable Clamp Double



Cable Clamps for Flat (1.5 - 23 mm) and

Round (8 - 23 mm) Tower Members

Cable Clamps

For Flat (3-25 mm) and Round (8-25 mm) Tower Members

STANDARD CLAMPS

1/2” CABLE

ARTICLE CABLE NO. OF CABLES

CL23-1C012-B0 1/2" 1

CL23-2C012-B0 1/2" 2

CL23-3C012-B0 1/2" 3

CL23-4C012-B0 1/2" 4

CL23-5C012-B0 1/2" 5

7/8” CABLE


CL23-1C078-B0 7/8" 1

CL23-2C078-B0 7/8" 2

CL23-3C078-B0 7/8" 3

CL23-4C078-B0 7/8" 4

CL23-5C078-B0 7/8" 5

1 1/4” CABLE


CL23-1C114-B0 1 1/4" 1

CL23-2C114-B0 1 1/4" 2

CL23-3C114-B0 1 1/4" 3

1 5/8” CABLE


CL23-1C158-B0 1 5/8" 1

CL23-2C158-B0 1 5/8" 2

CL23-3C158-B0 1 5/8" 3

Typical usage examples for clamps.

Revision A

PRODUCT FEATURES

Made of stainless steel and U.V. resistent Fiberglass P.A.

Fast and easy assembly

Secured with wrench or hex key

Various cable dimensions

Supports up to 5 cable runs

No need for adapters or drilling holes

Minimises utilised space on towers, reducing wind load

Protective interlayers safeguard against cable deformation

For use with 3 - 25 mm (0.12 - 1.0 in) flat and 8 - 25 mm

(0.31 - 1.0 in) round members

1x.. 2x.. 3x.. 4x.. 5x..



Cable Clamps for 40 mm Angle Tower

Members

Cable Clamps

for 40 mm Angle Tower Members

STANDARD CLAMPS

1/2” CABLE


CL40-1C012-B0 1/2" 1

CL40-2C012-B0 1/2" 2

CL40-3C012-B0 1/2" 3

CL40-4C012-B0 1/2" 4

CL40-5C012-B0 1/2" 5

7/8” CABLE


CL40-1C078-B0 7/8" 1

CL40-2C078-B0 7/8" 2

CL40-3C078-B0 7/8" 3

CL40-4C078-B0 7/8" 4

CL40-5C078-B0 7/8" 5

1 1/4” CABLE


CL40-1C114-B0 1 1/4" 1

CL40-2C114-B0 1 1/4" 2

CL40-3C114-B0 1 1/4" 3

1 5/8” CABLE


CL40-1C158-B0 1 5/8" 1

CL40-2C158-B0 1 5/8" 2

CL40-3C158-B0 1 5/8" 3

Revision A

PRODUCT FEATURES

Made of stainless steel and U.V. resistent Fiberglass P.A.


Various cable dimensions


Secured with wrench or hex key

For use with 40 mm (1.57 in) angle members

No need for adapters or drilling holes


Protective interlayers safeguard against cable deformation

Typical usage examples for clamps.

1x.. 2x.. 3x.. 4x.. 5x..



Cable Clamp SingleCable Clamp Single

STANDARD CLAMPS

1/2” CABLE


CLS0-1C012-A0 1/2" 1

CLS0-2C012-A0 1/2" 2

CLS0-3C012-A0 1/2" 3

CLS0-4C012-A0 1/2" 4

7/8” CABLE


CLS0-1C078-A0 7/8" 1

CLS0-2C078-A0 7/8" 2

CLS0-3C078-A0 7/8" 3

CLS0-4C078-A0 7/8" 4

1 1/4” CABLE


CLS0-1C114-A0 1 1/4" 1

CLS0-2C114-A0 1 1/4" 2

CLS0-3C114-A0 1 1/4" 3

CLS0-4C114-A0 1 1/4" 4

1 5/8” CABLE


CLS0-1C158-A0 1 5/8" 1

CLS0-2C158-A0 1 5/8" 2

CLS0-3C158-A0 1 5/8" 3

CLS0-4C158-A0 1 5/8" 4

Revision A

PRODUCT FEATURES




PRODUCT PROFILE

Cable clamp single is a unit designed for safe simultaneous fixation of

coaxial cables on mountain surface. All components are specially con-

structed to work as a whole unit to support quick installation. No ad-

ditional parts for applying are required. All parts are manufactured ac-

cording to European standards. The clamps are made of environmental

protected plastic which provides UV resistance in all environments.



Cable Clamp Double

STANDARD CLAMPS

1/2” CABLE


CLD0-2C012-A0 1/2" 2

CLD0-4C012-A0 1/2" 4

CLD0-6C012-A0 1/2" 6

CLD0-8C012-A0 1/2" 8

7/8” CABLE


CLD0-2C078-A0 7/8" 2

CLD0-4C078-A0 7/8" 4

CLD0-6C078-A0 7/8" 6

CLD0-8C078-A0 7/8" 8

1 1/4” CABLE


CLD0-2C114-A0 1 1/4" 2

CLD0-4C114-A0 1 1/4" 4

CLD0-6C114-A0 1 1/4" 6

1 5/8” CABLE


CLD0-2C158-A0 1 5/8" 2

CLD0-4C158-A0 1 5/8” 4

CLD0-6C158-A0 1 5/8” 6

Cable Clamp Double

Revision A

PRODUCT FEATURES




PRODUCT PROFILE

Cable clamp double is a unit designed for safe simultaneous fixation of co-

axial cables on mountain surface. All components are specially constructed

to work as a whole unit to support quick installation. No additional parts

for applying are required. All parts are manufactured according to Euro-

pean standards. The clamps are made of environmental protected plastic

which provides UV resistance in all environments.



PASSIVES

The Exir Telecom branded high performance power splitters and tappers are made

from solid copper and silver-plated to provide the most consistent and reliable elec-

trical specifications. They are water-pressure proof down to 25 metres, which cor-

responds to a pressure of 2.5 bar and far exceeds the requirements for IP68-clas-

sification. This eliminates the need for tape or any other external weatherproofing.

The LEAX range of passives cover all frequencies are rated IP66 and a cost ef-

ficient alternative for indoor use.

Exir branded Passives

Tappers, Broadbanded n dB-coupler 380 - 470 and 790 - 2700 MHz

Power Splitters, Hybrid n dB-coupler, 806 - 960 MHz

Power Splitters, Hybrid 3 dB-coupler 1710 - 2170 MHz

3 dB Hybrid, 698 - 2690 MHz

2-Way Power Splitter, 790 - 2700 MHz

3-Way Power Splitter, 790 - 2700 MHz

4-Way Power Splitter. 790 - 2700 MHz

Absorbers, 100 W

Absorbers, 50 W

Absorbers, 25 W

Absorbers, 5 W

LEAX branded Passives

Directional Coupler, 380 - 2700 MHz

Directional Coupler, 698 - 2700 MHz (2 pages)

Wideband Power Splitter, 2/3/4-way, 380-2700 MHz

Wideband Reactive Power Splitter, 2/3/4-way, 698-2700 MHz

Wideband Reactive Power Splitter, 2/3/4-way, 698-2700 MHz

Hybrid Coupler, 698-2700 MHz

Attenuator, 2 W - 200 W

Absorbers

100 W



PRODUCT FEATURES

Extremely small

Very low insertion loss

Made of si lver-plated brass


EPDM O-rings eliminate water intrusion



In Out

Out ndB


Revision C

Tappers

Broadbanded n dB-coupler 380 - 470 and 790 - 2700 MHz

ARTICLE DBCM-0602-AA00 /DBCM-0602-AA01

DBCM-0702-AA00 /DBCM-0702-AA01





CONNECTORS DIN 7/16 female /

N female

DIN 7/16 female /

N female

DIN 7/16 female /

N female

DIN 7/16 female /

N female

DIN 7/16 female /

N female

DIN 7/16 female /

N female

INPUT POWER 600 / 150 W 600 / 150 W 600 / 150 W 600 / 150 W 600 / 150 W 600 / 150 W

PIECES IN BOX As requested / 50 As requested / 50 As requested / 50 As requested / 50 As requested / 50 As requested / 50FREQUENCY RANGE 380 - 470 MHz 380 - 470 MHz 380 - 470 MHz 380 - 470 MHz 380 - 470 MHz 380 - 470 MHz

790 - 2700 MHz 790 - 2700 MHz 790 - 2700 MHz 790 - 2700 MHz 790 - 2700 MHz 790 - 2700 MHz

COUPLING ATTENUATION

380 - 470 MHz -9 dB (13 % of Pin) -10 dB (10 % of Pin) -15 dB (3 % of Pin) -17 dB (2 % of Pin) -21 dB (0.8 % of Pin) -28 dB (0.15 % of Pin)

790 - 2700 MHz -6 dB (25 % of Pin) -7 dB (20 % of Pin) -10 dB (10 % of Pin) -13 dB (5 % of Pin) -15.1 dB (3 % of Pin) -20 dB (1 % of Pin)

OUTPUT PERCENTAGE 25 % / 75 % 20 % / 80 % 10 % / 90 % 5 % / 95 % 3 % / 97 % 1 % / 99 %

VSWR / RETURN LOSS

380 - 470 MHz 1.5 / 14 dB 1.5 / 15 dB 1.22 / 20 dB 1.12 / 25 dB 1.12 / 25 dB 1.12 / 25 dB

790 - 2700 MHz 1.5 / 14 dB 1.5 / 15 dB 1.22 / 20 dB 1.12 / 25 dB 1.12 / 25 dB 1.12 / 25 dB

INSERTION LOSS -0.05 dB -0.05 dB -0.05 dB -0.05 dB -0.05 dB -0.05 dB

IMPEDANCE 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm 50 ohm

INTERMODULATION*

2 x 20 transmitter < -156 dBc < -156 dBc < -156 dBc < -156 dBc < -156 dBc < -156 dBc

WEIGHT 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb) 350 g (0.76 lb)

DIMENSIONS 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm 72 x 78 x 25 mm

H x W x D (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in) (2.84 x 3.06 x 0.97 in)



Power Splitters, Hybrid n dB-coupler, 806 - 960 MHz

Power Splitters

Hybrid n dB-coupler, 806 - 960 MHz

PRODUCT FEATURES

Extremely good VSWR

Made of silver-plated brass





COMMON FOR ALL

INPUT POWER 700 W



ISOLATION -33 dB

IMPEDANCE 50 ohm




H x W x D (5.32 x 3.55 x 1.96 in)

ARTICLE DBCM-0305-AA00 DBCM-0605-AA00 DBCM-1005-AA00 DBCM-1305-AA00

CONNECTORS DIN 7/16 female DIN 7/16 female DIN 7/16 female DIN 7/16 female

COUPLING ATTENUAT. 3 dB ±0.1 6 dB ±0.3 10 dB ±0.3 13 dB ±0.3

OUTPUT PERCENTAGE 50% / 50% 25% / 75% 10% / 90% 5% / 95%

Out

COMBINING SIGNALSFROM TWO TX / RXs

In

In

Absorber

In

SPLITTING SIGNALSFROM ONE TX / RX

Out

Out

Absorber

In

SPLITTING SIGNALS

FROM TWO TX / RXs

Out

Out

In

Revision A



Power Splitters, Hybrid 3 dB-coupler 1710 -

2170 MHz

Power Splitters

Hybrid 3 dB-coupler 1710 - 2170 MHz

PRODUCT FEATURES

Extremely small

Very low insertion loss

Made of si lver-plated brass





Out

COMBINING SIGNALSFROM TWO TX / RXs

In

In

Absorber

In

SPLITTING SIGNALSFROM ONE TX / RX

Out

Out

Absorber

In

SPLITTING SIGNALSFROM TWO TX / RXs

Out

Out

In

COMMON FOR ALL


COUPLING ATTENUAT. 3 dB ±0.15

OUTPUT PERCENTAGE 50% / 50%

RETURN LOSS -25 dB

ISOLATION -28 dB

IMPEDANCE 50 ohm




H x W x D (3.78 x 3.74 x 1.96 in)

ARTICLE DBCM-1722-AA01 DBCM-1722-AB01

CONNECTORS DIN 7/16 female N female

INPUT POWER 600 W 150 W

Revision A



3 dB Hybrid

698 - 2690 MHz

3 dB Hybrid, 790-2700 MHz

Revision B

PRODUCT FEATURES

High Performance

High Reliability

Low Noise Figure

ROHS Compliant

IP67-classified

ARTICLE DBCM-0727-AA00 DBCM-0727-AA01

ELECTRICAL


INSERTION LOSS ±0.8 dB

COUPLING VALUE 3.1 dB

VSWR 1.3:1 Max

ISOLATION 18 dB Min

POWER HANDLING 50 W

PIM (3rd Order 2*43dBm) -150 dBc typical

IN/OUT IMPEDANCE 50 Ohm nominal

ENVIRONMENTAL

OPERATING TEMPERATURE -20 to +70 °C

MECHANICAL

DIMENSIONS H x W x D

HYBRID 270 x 64 x 33 mm

(10.63 x 2.52 x 1.30 in)

270 x 57 x 52 mm

(10.63 x 2.24 x 2.04 in)

BRACKET 100 x 114 x 12 mm

(3.94 x 4.49 x 0.47 in)

100 x 114 x 12 mm

(3.94 x 4.49 x 0.47 in)

RF CONNECTOR N (F) 7/16 (f)

FINISH Grey colour epoxy coating



2-Way Power Splitter, 790 - 2700 MHz2-Way Power Splitter

790 - 2700 MHz

PRODUCT FEATURES

Made from silver-plated brass




Out

In

Side view

Out

ARTICLE AT2G-716F-AB00 AT2G-00NF-AB00

FREQUENCY RANGE 790 - 2700 MHz 790 - 2700 MHz

INPUT POWER

790 - 960 MHz 1000 W 300 W

1700 - 2200 MHz 700 W 150 W

2500 - 2700 MHz 500 W 100 W


INPUTS/OUTPUTS 1/2 1/2

VSWR / RETURN LOSS 1.17 / -22 dB 1.17 / -22 dB

INSERTION LOSS



3-Way Power Splitter, 790 - 2700

MHz

3-Way Power Splitter

790 - 2700 MHz

PRODUCT FEATURES




IP68-classified and water-pressure proof tested down to 25 mOut

In

Side view

Out



INPUT POWER

790 - 960 MHz 1000 W 300 W

1700 - 2200 MHz 700 W 150 W

2500 - 2700 MHz 500 W 100 W



VSWR / RETURN LOSS 1.17 / -22 dB 1.17 / -22 dB

INSERTION LOSS



4-Way Power Splitter

790 - 2700 MHz

PRODUCT FEATURES





In

Out

Side view

Out



INPUT POWER

790 - 960 MHz 1000 W 300 W

1700 - 2200 MHz 700 W 150 W

2500 - 2700 MHz 500 W 100 W



VSWR / RETURN LOSS 1.17 / -22 dB 1.17/ -22 dB

INSERTION LOSS



Absorbers

100 W

PRODUCT FEATURES

Rohs compliant

COMMON FOR BOTH


INPUT POWER (at 25 °C) 100 W

IMPEDANCE 50 ohm

RETURN LOSS

0 - 1000 MHz 35 dB

1000 - 2500 MHz 32 dB

2500 - 3000 MHz 18 dB



H x W x D (4.93 x 5.32 x 4.93 in)

WEIGHT 2400 g (5.28 lb)

Absorbers, 100 W

Revision B

ARTICLE LDB0-0100-A0 LDB0-0100-B0 LDB0-0100-C0 LDB0-0100-D0

CONNECTOR DIN 7/16 female DIN 7/16 male N female N male



Absorbers, 50 W

Absorbers

50 W

PRODUCT FEATURES

Rohs compliant

Available with BNC

COMMON FOR BOTH

FREQUENCY RANGE DC – 4000 MHz

INPUT POWER (at 25 °C) 50 W

PEAK POWER 5 kW

IMPEDANCE 50 ohm ± 2%

RETURN LOSS

0 - 2000 MHz 26 dB

2000 - 4000 MHz 20.8 dB

OPERATING TEMPERATURE -55 to +125°C


H x W x D (2.83 x 1.97 x 3.7 in)


ARTICLE LDB0-0050-A0 LDB0-0050-B0

CONNECTOR DIN 7/16 female DIN 7/16 male

Revision B

8/20/2019 Leax Arkivator Telec

leax arkivator telecom catalogue 2014 (2)

Documents