Page: 1 of 2

HyLite High Performance LED Intigo Lamps - Up to 25,000 hour* Rated Design Life. Outstanding Quality of Light with Energy Savings of 87% over Incandescent, 80% over HPS / MH Lamps and 64% over CFL.

100WMH / HPSEquivalent

*Depending upon the ambient temperature of the installation location

High Performance LED Omni-Directional Lamp, 20W

LED TMIntigo

Incandescent HPS/HID CFL HyLite

150W 100W 55W 20W

87% 80% 64% Energy Savings (%)** Does not include Ballast Loss, Maintenance and Replacement Lamp Savings and Disposal Costs which can amount to additional Savings of 30~50%!

Replacewith

Reduction ofup to 87%

Energy Costs

Radiation-FreeNo Humming

IRUV

No IR/UV

No Noise

LM-80 TestedISTMT Tested

Reliability

150 LpWLM-79 Tested

High Efficacy

Safe andReliable

Warranty

5Years

Vibration andShock Resistant

Solid State

Up to 25,000 Hours

Low Power

Longer Life&

290°Illumination

Omnidirectional

For Enclosed Luminaires

Suitable

Zero Interference

No EMi / RFi

Suitable for

Damp Locations Enclosed Fixtures

Recommended Applications

Designed for Easy Installation in New Fixtures or Existing Luminaires, HyLite LED Intigo Omni-Directional Lamps are Suitable for a Wide Variety of Applications. They feature Excellent Optics for Increased Visibility, and Low Power Consumption. With Lamp Life of up to 25,000 hours, they significantly reduce Energy Consumption and Relamping Costs, consequently decreasing Maintenance and Disposal Costs.

The HyLite LED Intigo Lamp enhances Vision for better Optical Acuity, and provides Clean, Crisp Light. Suitable for Fully Enclosed Fixtures, its Compact Size makes it the ideal Replacement for CFL, MV, HID, and HPS Lamps in existing Fixtures.

• ExtremelyEfficient:HighLumenEfficacy:Upto150LpW.

• FullyEncapsulated:Shatter-proof,High-Shock&High-VibrationResistant.

• OptimalDesignforHorizontalorVerticalMountSockets

•High>84CRI.CrisplightforgreaterVisibilityandSafety.

• EasyInstallation&Retrofitting:SimplyBypassBallastandScrew-in.Runson ACDirectLineVoltage.EliminatesCompatibility,PowerLoss&Lifetime IssuesandMaintenanceCostsassociatedwithBallasts

• UniversalVoltage:100-277V,AC

•InstantStartandRestart:NoWarm-upTimerequired.

• Heat&ImpactResistant,UVProtected,Non-yellowing,OpticalGradeLens.

• ExcellentThermalManagementwithProprietary-DesignedHeatSink.

• CoolOperation:DoesnotaddtoHeatLoadwhileproducingBrilliantLight.

• SafeandReliable:IsolatedCircuitDesign.

•NoUVEmissions:DoesNotattractInsects.

•NoNoise,Electro-Magnetic(EMi)orRadioFrequencyInterference(RFi).

• Radiation/Emissions-Free:NoHarmfulIRLevels.

• IngressProtection:IP65.CompleteprotectionagainstContact,DustInfiltration and Water Splashes.

•Safe:ContainNoHazardousMaterials;RoHSCompliant:NoLead,Mercury, ToxicMetalsorArsenicGases.NoDisposalrequirements.FacilitatesLEED® points.

•EnvironmentallyFriendly:98%oftheHyLiteLEDLampisRecyclable.

• LowTotalCostofOwnershipwithShortestPaybackPeriodandHighROI.

Proprietary

& Patented

Design

Page: 2 of 2

Model Delivered Maximum InputLine Base Dimensions&Weight(each) No. Watts Lumens Install Height Current Type Diameter Height Weight

HL-IOD-20W-E26 20 2,920 <16ft.(5m) 73~154mA E26(Medium) 2.4”(60mm) 5”(127mm) 7oz.(200g)

As part of the company’s continuous product improvement program, HyLite reserves the right to change materials or modify the design of its product without notification. All Specifications subject to change without notice. All values are design and/or typical values when measured under laboratory conditions. Actual Values depend upon the ambient temperature of the installation location. Please consult factory for your specific requirements.

LED TMIntigo

NOLEAD, MERCURY, HEAVY METALS

OR TOXIC GASES

98%RECYCLABLE

Ø2.4” (60mm)

5” (1

27m

m)

• MinimumLampCompartmentDimensionsforEnclosedFixtures:6”x6”x8.5”(152mmx152mmx216mm)• ToPreventearlyLampFailure,LampshouldonlybeinstalledinOperatingEnvironmentsrangingfromaMinimumof-20°C(-4°F)toaMaximumof+45°C(113°F)• Efficacy:150LpW • CRI:>84 • BeamAngle:290º • Max.THD(%):<17% • UniversalInputVoltage• PowerFactor:>0.98 • Protection:IP65 • RatedLife:25,000Hrs.* • Warranty:5Years 100~277V,AC50/60Hz.• AmbientWorkingTemperature:-4ºF~+113ºF(-20ºC~+45ºC)• 3000°Kand5000°KStandardCCT.Productswith2400°-6500°K(CCT)areavailableas“SpecialOrders” only and with Longer Lead Times*Depending upon the ambient temperature of the installation location

Installation: HyLite LED Lampsaredesignedtoworkoff100Vto277V,AC.Ballast(ifequipped)mustbebypassedorremovedfrom the fixture before installing the lamp. EliminatingtheBallastsavesadditional costs related to Maintenance, Energy Consumption and Performance.By-passingBallastwillalsoensurethatthereisnoEMi/RFinterference.The installer MUST ensure and verify that NO Part of the installed LED Lamp should touch the Fixture Housing or Components.

Failure to follow these Instructions will result in a Damaged Product and will VOID Warranty. It could also result in an Electric Shock, or Fire.

Warning - Risk of Fire or Electric Shock

• Disable all Power to the Lamp before Inspection, Installation, or Removal. Failure to do so will create a Hazardous and Fatal Working Environment.

• SuitableforuseinDry,DampandWetLocations.LampmustbeinstalledinaccordancewithNational,State,and/orLocalElectricalCodes. Do Not Open – No User Serviceable Parts Inside.

• TopreventearlyLampfailure,LampshouldonlybeinstalledinOperatingEnvironmentsrangingfromaminimumof-20°C(-4°F)toamaximumof+45°C(113°F).

• OperateinFixturesthatprovidetheFreeFlowofAiraroundtheLampHeatSink.InEnclosedFixtures,ensuretheLamphasenoughSpaceforHeatDissipation. This will ensure Lumen Maintenance and extend its Working Life. When products are used in Outdoor Fixtures, ensure the space is Waterproof and Well Ventilated.

• NotforuseonaDimmerorRemoteControls.ThisLamp must be controlled only by either a Switch or an Electronic Photosensor. Do not use a Mechanical Sensor.

• NotintendedforusewithEmergencyExitFixturesorEmergencyExitLights.

• Caution:WhenInstallingLampsinCorrosiveEnvironments,HyLitesuggeststhataHigh-Temperature,Moisture-Resistant,SiliconeGreaseorSealantbeusedto protecttheMetal-threadedbaseoftheLEDLamptopreventWaterand/orMoistureIncursionthatcanleadtoPrematureDegradationoftheLampBaseand eventual Lamp Failure. This is especially recommended for LED Lamp installations near Saltwater bodies.

• InstallingSurge/LightningProtectorsisHighlyRecommendedandhelpstoEliminatePrematureDriverFailurecausedbySurgesandPowerFluctuations.

©2017-2019HyLiteLED,LLC.,USA Formoreinformation,pleasevisit:https://hyliteledlighting.com/ 031219