INSTRUCTIONS

led port-a-cubeCT-DLLEDIICT-DSLEDII

2

IntroductionCongratulations on purchasing the Angler LED Port-a-Cube.

The Angler LED Port-a-Cube is a foldable and portable lighting solution for product photography. It features bright LEDs adjusted for 5400K color temperature, and are built into the Port-a-Cube so there’s no extra assembly. The LEDs deliver clean, even, and shadowless lighting that is flicker free, ensuring consistent exposure for every shot.

An included diffuser helps soften the light, while the built-in dimmer allows you to dial in the brightness level. Two photo windows offer frontal and top-down perspectives for items such as jewelry, mobile electronics, or any small item for auction and web retail. The diffuser provides shooting access through a window, making top-down shots easier and unobstructed. Four different backgrounds let you set the scene of your photo shoot with high key, low key, flat gray, and green screen.

3

Precautions Please read all instructions carefully before assembling and operating this product.

Use this light with only the rated voltage on the power supply, as any misuse could risk damage or malfunction.

Avoid using this light in any high-moisture environments, as this could also cause damage or malfunction.

To prolong the life of the unit, turn the power off and unplug the light when it is not in use.

Do not attempt to disassemble or repair this product. There are components inside that can produce a hazardous electric shock.

Keep this product away from water and any flammable gases or liquids.

Do not leave the device in a closed vehicle under the sun or in other areas subject to very high temperatures.

Make sure this product is powered off when plugging it into a power source.

Handle this product with care.

Clean this product with only a soft, dry cloth.

Keep this product away from children.

Make sure that this product is intact and that there are no missing parts.

All images are for illustrative purposes only.

4

Background pocket

Diffuser

LED strip

Top photo window

Front photo window

Touch-fastener strips

Closing panel

Mesh pocket

Handle

Silver reflective lining

A

FDE B

C

5

Backgrounds (gray, green, white, black)

Diffuser

Power adapterwith dimmer

Power cable

LED strip

Flexible Stand

Adapter

6

Assembling the LED Port-a-Cube1. Fold up panels A, B, and C. Make

sure the touch-fastener strips are fully connected.

2. (Optional) Insert the blank end of the background into the background pocket on panel D, and match the touch-fastener pads with the touch-fastener strips on panel F.

3. Lift panels D and E to complete the enclosure. Make sure the touch-fastener strips are fully connected.

4. Rotate the Port-a-Cube so side B is on top.

2

4

1

ACB

3 C

A

D

E

B

7

5. (Optional) To attach the diffuser, pull the top open, and connect the diffuser to the touch-fastener strips on panels A and C so the diffuser covers the LED strip when assembled.

6. Plug the LED Port-a-Cube into an AC power source, and adjust the desired brightness level with the dimmer.

5

6

E

DC

A

B

8

Packing the LED Port-a-Cube1. Unplug the power adapter from the

power outlet and the LED strip’s power cable.

2. Disassemble the LED Port-a-Cube so each panel is lying flat, and insert the backgrounds into the background pocket.

3. Fold panel B onto panel F. Make sure the LED power cable is not sticking out.

4. Fold in panels A, C, and E.

2

3

4

9

5. Fold the Port-a-Cube together.

6. Fold the flap over matching the touch fastener strips. You can store the power adapter, cables, and diffuser in the outer mesh pocket.

5

6

10

CT-DSLEDII 17 in.

LED count 120

Color temperature 5400 K

Power consumption 50 W

Input power 85–265 V, 50/60 Hz

Output (voltages vary depending on the input)

25–40 V @ 1500 mA 30–55 V @ 900 mA 28–45 V @ 1200 mA

Dimmer range 10% to 100%

Dimensions17" × 17" × 17"(43 × 43 × 43 cm)

Weight 2.65 lb. (1.2 kg)

CT-DLLEDII 27 in.

LED count 150

Color temperature 5400 K

Power consumption 65 W

Input power 85–265 VAC, 50/60 Hz

Output (DC) +42 V / 1.5 A max.

Dimmer range 10% to 100%

Dimensions27" × 27" × 27"(69 × 69 × 69 cm)

Weight 6.5 lb. (2.9 kg)

Specifications

11

One-Year Limited WarrantyThis Angler product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state. To obtain warranty coverage, contact the Angler Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Angler along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.anglerlights.com or call Customer Service at 212-594-2353.

Product warranty provided by the Gradus Group.www.gradusgroup.com

Angler is a registered trademark of the Gradus Group.

© 2018 Gradus Group LLC. All Rights Reserved.

ANGLERA Gradus Group Brand GG1