leps experiment from 2008.jan to 2009.jul
DESCRIPTION
LEPS experiment from 2008.Jan to 2009.Jul. using the new TPC and new liquid cryo-target system. 2008.Jan-Jul: 257nm laser, LH 2 tagger rate ~2x10 5 /s 2008.Oct-Nov: 355nm laser, LD 2 tagger rate ~1x10 6 /s Speed up DAQ by decentralizing the TPC sense-wire readout - PowerPoint PPT PresentationTRANSCRIPT
LEPS experiment from 2008.Jan to 2009.Jul
• 2008.Jan-Jul: 257nm laser, LH2 tagger rate ~2x105 /s
• 2008.Oct-Nov: 355nm laser, LD2 tagger rate ~1x106 /s Speed up DAQ by decentralizing the TPC sense-wire readout and modifying the program. Trigger: sideway + forward
• 2008.Dec, 2009Feb,Jul: 355nm laser, LH2 : confirm the old TPC data,• calibration, etc.• 2009.Mar-Jul: 355nm laser, LHe : search for the hypernuclei
2.96 GeV LH2 1405
) ( (*)
*0*
K)(Λp
KKKΘp*
using the new TPC and new liquid cryo-target system
~8x1011 photons(~ old TPC run)
2.4 GeV LD2 ppKΘ
KΘn
s
""
~1.6x1012 photons
~2.0x1012 photons
bound4 )( : )1520(He dΘXX
~4.6x1012 photons
2008B-2009A :主な trouble & setting 変更• 10/2: TPC FADC 配線変更 (高速化) , プログラム修正 10/9-10/11: LD2, trigger#23(TPC) [DC2U に歯抜け not for analysis]• 10/11: DC2U PA 交換、 TagPL hrtdc 用 delay 一部変更 10/12-10/16: LD2, trigger#23• 10/16: replace AC ( 1.0081.03), set ee-veto scinti add STD trigger 10/16-10/28, 11/13-11/29: LD2, trigger#24(TPC+STD) 11/17-12/7: LH2, trigger#24• 12/7: DC1U trip [12/7-12/12: DC1U 無しのデータ not for analysis]• 1 月~ 2/4: DC1 修理、 TOF 研磨、 AC 交換( 2 枚 3 枚)• 2/4: setting&alignment(DC1,solenoid(TPC)+NDC,FWD,TOF) 2/7-2/8: LH2, trigger#24• 2/8: Solenoid OFF [2/8-2/13 solenoid 磁場無しのデータ not for analysis] • 2/13: solenoid temperature was recovered solenoid ON 2/13-21: LH2, trigger#24• 2/21: A wire of DC1V was broken (2/24,25 修理 )
2008B-2009A :主な trouble & setting 変更• 3/2: setting & alignment (DC1,solenoid(TPC)+NDC,FWD) 3/2-3/12: LHe, trigger#25(TPC/2+STD) [ 標的中に泡成長 not for analysi
s]• 3/24,27: DC1 再修理、レーザー系 第 1 、第 2 ミラー交換 4/6-4/22, 5/15-5/30, 6/1-6/17, 6/25-7/5: LHe, trigger STD (5/15: set rate-monitor, 6/1: replace it to new one, 6/24: reset it) 7/7-7/24: LH2, trigger#24 (7/12: solenoid quench recover soon) 7/25-7/26: 磁場無しラン (for software alignment) 7/26-28: Cu(test), trigger#24(narrow)NB ) 10/15-10/28: AC1 は noisy 6/7-6/9: all DC gains were large due to incorrect gas mixture 6/28-30: peakADC of TPC anode#33 was strange 6/27-7/28: there might be a bad channel in the PADs of sector6, layer5 <Check scalers and singles histograms for all runs with modified online_ana> Summary and corrected photon numbers of each run used for analysis: http://www.rcnp.osaka-u.ac.jp/~yosoi/NTPC_Doc/index.html
Correction factor for Tagger scaler • Calculate the correction factor according to Tech-note No.15 by Kohri (slightly
modified)
Pile-up events: |T(i)-T(j)|< T_width ( best T_width=40nsec) Correction factor : R=generated events/(generated events – pile-up events)
why?
Correction factor for each filling pattern
TPC&STD/ Tag (horizontal)
141618202224262830
41800 41900 42000 42100 42200 42300 42400 42500 42600Run#
Ratio
C- modeD- modeE- modeM- modeC- modeD- modeE- modeA- mode
TPC&STD/ corTag (horizontal)
141618202224262830
41800 41900 42000 42100 42200 42300 42400 42500 42600Run#
Ratio
C- modeD- modeE- modeM- modeC- modeD- modeE- modeA- mode
17.73±0.51
LHe run
corrected
TPC&STD/ Tag (Horizontal)
202224262830323436
40500 40600 40700 40800 40900 41000 41100Run#
Ratio
Db- modeA- modeA- modeEb- modeM- mode
TPC&STD/ corTag (Horizontal)
202224262830323436
40500 40600 40700 40800 40900 41000 41100Run#
Ratio
Db- modeA- modeA- modeEb- modeM- mode
25.15±0.38
LD2 run
corrected
TPC&STD/ Tag (Horizontal)
10
12
14
16
18
20
41000 41100 41200 41300 41400 41500 41600Run#
Ratio
TPC&STD/ Tag (Horizontal)
10
12
14
16
18
20
42500 42600 42700 42800Run#
Ratio
M- modeDb- modeDb- modeC- modeM- modeA- modeM- modeC- modeDa- mode
TPC&STD/ corTag (Horizontal)
10
12
14
16
18
20
41000 41100 41200 41300 41400 41500 41600Run#
Ratio
TPC&STD/ corTag (Horizontal)
10
12
14
16
18
20
42500 42600 42700 42800Run#
Ratio
M- modeDb- modeDb- modeC- modeM- modeA- modeM- modeC- modeDa- mode
LH2 run
13.16±0.25
corrected
Data statistics• Corrected tagger photon# ×DAQ live ratio LHe(Std): 4.55x1012 (hori 2.25x1012, vert 2.30x1012) LD2(#24/#23): 1.64x1012 (hori 0.82x1012, vert 0.82x1012) [trig#24 1.41x1012/ trig#23 0.23x1012] LH2(#24): 1.96x1012 (hori 0.93x1012, vert 1.03x1012)• Luminosity (L=nb ・ NT NT =NA/A ) Scaling factor of transmission: 0.525±0.013 (from PWO data) Target density of LHe/LD2/LH2 with 15cm at boiling point 1.875 g/cm2, 2.535 g/cm2, 1.062 g/cm2
Luminosity: LHe 6.79x1035 cm-2 =0.679 pb-1
LD2 6.53x1035 cm-2 =0.653 pb-1
LH2 6.53x1035 cm-2 =0.653 pb-1
cf.) 3GeV LH2 ( ~ 0.8x1012x0.532)x(1.062xNA/A) = 0.27 pb-1
Check pedestal files (miho:/np1b/v04/sp8lep/ntpc/pede/)
・ remove some strange runs (not junk runs in the log-note)
・ ch1253 (Preamp79, ch 5) shows 2 lines. (sector 6, layer 7, 3rd pad)
Run#
pede
stal
_mea
n
NTPC gain correctionwith cosmic-ray data
wire gain (r40210)
40
50
60
70
80
90
100
110
0 10 20 30 40 50 60anode #
peak
chan
nel
cut- fixnocut- fix
gain
8090
100110120130140150160170
0 5 10 15 20layer#(U:1- 9,D:10- 18)
peak
chan
nel
padwire sumwire sum0
cut: |dip angle|<15° -1717<z<-1517
Pad (peakAdc) vs wire sum good wihi / wi
w-2=w2=0.127516 w-1=w1=0.245298 w0=0.298944読んでいない両端の Wire は 1 番目と 27 番目の wire の x0.5が良い
z- dependence of Pad gain (Gauss fit)
0.80.850.9
0.951
1.051.1
1.151.2
1.251.3
- 1900 - 1800 - 1700 - 1600 - 1500 - 1400 - 1300 - 1200 - 1100z (mm)
ratio
for z
=-16
17
U- aveD- aveSum
z-dependence of Pad gain
x
y
z
y
(-25<x<25)(-1717<z<-1517)