liberty floodlight (lbf)

Configure Driver Housing SeparatelyDriver Housing Required

REMOTE DRIVER HOUSINGS:

RM - Remote Wall MountDRM - Dual Remote Wall Mount

PM2RM - Universal Power Module 2 RemotePM2DRM - Universal Power Module 2 Dual Remote

HP2RM - HP2 Remote Housing

INTEGRAL DRIVER HOUSINGS:

PM2 - Universal Power Module 2 (For use with Aluminum Fixtures only.)

PM2D - Universal Power Module 2 Dual (For use with Aluminum Fixtures only.)

HP2 - HP2 Housing (Faceplate and Finish to match Fixture.)

PPII - Power Pipe II (For use with Aluminum Fixtures only.)

PC - Power Canopy (For use with Aluminum Fixtures only.)

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.

40429 Brickyard Drive • Madera, CA 93636 • USA559.438.5800 • FAX 559.438.5900

www.tekaillumination.com • [email protected]

RELEASED

09-18-2017DRAWING NUMBER

SUB-2615-00

CATALOG NUMBER LOGICLBF LED

Example - LBF - 12" - LED - x64 - FL - AQW - 12 - 11 - A

MaterialBlank - Aluminum

C - Copper

SeriesLBF - Liberty Floodlight

Stem Length- 3", 6", 12", 18"

SourceLED - Power of 'X' Technology with Chip on Board Construction

LED Typex64 - 27WLED/2700Kx65 - 27WLED/3000Kx66 - 27WLED/4000K

OpticsSP - SpotFL - Flood

WFL - Wide Flood

FinishNAT - Natural* Powder Coat Standard Finish Powder Coat Premium Finish

BP - Brown Patina* Powder Coat Color Satin Wrinkle ABP Antique Brass Powder CMG Cascade Mountain Granite RMG Rocky Mountain Granite

GP - Green Patina* Bronze BZP BZW AMG Aleutian Mountain Granite CRI Cracked Ice SDS Sonoran Desert Sandstone

NIC - Nickel Plate* Black BLP BLW AQW Antique White CRM Cream SMG Sierra Mountain Granite

BZW - Bronze Wrinkle White (Gloss) WHP WHW BCM Black Chrome HUG Hunter Green TXF Textured ForestSee Powder Coat Finish Chartto the right for additional choices.*Not available with Aluminum. For Aluminum fixtures, specify Standard or Premium Powder Coat.

Aluminum SAP — BGE Beige MDS Mojave Desert Sandstone WCP Weathered Copper

Verde — VER BPP Brown Patina Powder NBP Natural Brass Powder WIR Weathered Iron

CAP Clear Anodized Powder OCP Old Copper Also available in RAL FinishesSee submittal SUB-1439-00

Lens Type9 - Clear (Standard)

10 - Spread Lens*12 - Soft Focus Lens*13 - Rectilinear Lens*

Shielding11 - Honeycomb Baffle*

(*Accommodates up to 2 Lens/Shielding media.)

Cap Style (Material and Finish to match Fixture.)

A - 45°B - 90°C - FlushD - 45° Less Weep Hole (Interior use only.)

E - 90° Less Weep Hole (Interior use only.)

LIBERTY FLOODLIGHT (LBF)PROJECT:

TYPE:

CATALOG NUMBER:

SOURCE: LED - Power of ‘X’ Technology with Chip On Board Construction

NOTES:

LBF LED



RELEASED


SUB-2615-00

SIDE VIEWFRONT VIEW

PROJECT:

TYPE:

LIBERTY FLOODLIGHT (LBF)

All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications.

SPECIFICATIONSGreenSource Initiative™ Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.tekaillumination.com/greensource for program requirements.

MaterialsCopper and Brass: Constructed from copper and brass. These enduring metals are inherently corrosion resistant.Aluminum: Constructed from Copper-Free aluminum (Type 6061-T6).

BodyHand spun from high purity, solid copper plate. High temperature, silicone ‘O’ Ring provides water tight seal. Machined from 6061-T6 Aluminum or 360 Brass.

KnuckleMachined from 6061-T6 Aluminum or 360 Brass. Lamp head adjustment lock screw. High temperature, silicone ‘O’ Ring provides water-tight seal and compressive resistance to maintain fixture position.

CapHand spun from high purity, 14GA ASTM 3003-H14 Aluminum with 10GA ASTM 3003-H14 Aluminum Brackets or 16GA ASTM C101 Copper with 12GA AISI 304 Stainless Steel Brackets. Lens alignment lock screws allow for precision adjustment without the redundant opening of the fixture.

LensShock resistant, tempered, boro silicate glass lens is factory adhered to fixture cap and provides hermetically sealed optical compartment.

StemMachined from heavy wall 1"OD 6061-T6 Extruded Aluminum Tube or 1/8" Wall 330 Extruded Brass Tube.

BKSSL®Integrated solid state system with ‘X’ technology is scalable for field upgrade. Modular design with electrical quick disconnects permit field maintenance. High power, forward throw source complies with ANSI C78.377 binning requirements. Exceeds ENERGY STAR® lumen maintenance requirements. LM-80 certified components.LM-80 certified. Minimum 50,000 hour rated life at 70% of initial lumens (L70). BKSSL technology provides long life, significant energy reduction and exceptional thermal management.

InstallationMachined 1/2" NPSM adaptor for mounting to suitable enclosure.

Remote DriverFor use with remote LED driver. See remote driver submittal to determine remote distance and wiring requirements prior to detailing field installation of any remote wiring.

OpticsInterchangeable OPTIKIT™ modules permit field changes to optical distribution.

WiringXLPE coated 18AWG, 600V, 150°C rated and certified to UL 1659 standard.

FinishCopper and Brass: Natural (NAT): Copper and brass components are sand blasted to expose the porous metal surface. Over time, and with exposure to the elements, the metals will naturally ‘weather’ resulting in a unique patina.Also available with hand-crafted metal finishes including brown patina (BP), green patina (GP), polish (POL), and nickel plate (NIC).

Copper and brass components are also available in powder coat finishes.

Optional ceramic clear coat protection (copper and brass components only) seals and protects underlying metals and protects against discoloration, fading, and wear. Highly impervious to chemicals, solvents, and graffiti. For use with natural (NAT) finish.Aluminum: StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating.

Warranty5 year limited warranty.

ListingsUL tested to IESNA LM-79. UL Listed. Certified to CAN/CSA/ANSI Standards. RoHs compliant. Suitable for indoor or outdoor use. Suitable for use in wet locations. Additionally suitable for installation within 4' of the ground. IP66 Rated. Made in USA.

® Energy Star is a registered trademark of the United States Environmental Protection Agency.

Accessories (Configure separately)

Mounting: Remote Driver Housing:

Power Pipe™ Power Canopy™ Tree Strap™ Stems Canopies UPM™ HP2RM UPMRM™RM

Mounting:

Power Pipe™ Power Canopy™Tree Strap™ Canopies PM2D & PM2Power Pipe™ HP2RMHP2 PM2DRM & PM2RM RM & DRMTMB

Drivers:

Mounting:

Power Pipe™ Canopies HP2RM PM2DRM & PM2RM DRM & RM

Drivers:

Mounting:

Power Pipe™ Power Canopy™Canopies PM2D & PM2Power Pipe™ HP2RMHP2 PM2DRM & PM2RM RM & DRM

Drivers:

Drivers (Configure separately)

(Shown with Cap Style C - Flush)(Shown with Cap Styles B/E - 90°)(Shown with Cap Styles A/D - 45°)

5 3/8" Dia.(137mm)

4 1/4" Dia.(108mm) 8 1/16"

(205mm)

2 3/4"(70mm)

3 1/4"(83mm)

5 3/8" Dia.(137mm)

4 1/2" Dia.(114mm)

12 7/8"(327mm)

2 3/4"(70mm)

3 1/4"(83mm)

5 3/8" Dia.(137mm)

4 1/2" Dia.(115mm) 8 3/8"

(213mm)

2 3/4"(70mm)

3 1/4"(83mm)

LAMP & DRIVER DATAx64, x65, x66

LM79 DATA L70 DATA OPTICAL DATA

BK No.CCT

(Typ.)CRI

(Typ.)Input Watts

(Typ.)Minimum Rated Life (hrs.)70% of initial lumens (L70)

Angle CBCPDelivered

Lumens

x64

2700K 80 27W 50,000 15° 17591 2310

2700K 80 27W 50,000 35° 4799 2066

2700K 80 27W 50,000 60° 1738 1981

x65

3000K 80 27W 50,000 15° 18502 2430

3000K 80 27W 50,000 35° 5048 2173

3000K 80 27W 50,000 60° 1828 2084

x66

4000K 80 27W 50,000 15° 18939 2487

4000K 80 27W 50,000 35° 5167 2224

4000K 80 27W 50,000 60° 1871 2133

OPTICSOptic Angle Visual Indicator

Spot 15° Green

Flood 35° Yellow

Wide Flood 60° Blue

DRIVER ELECTRICAL DATA

Type AC Input Range Frequency Hz Power Factor

At Full Load (Efficiency) THD InRushCurrent

OperatingCurrent

Operation AmbientTemperature

DimmerType

Dimmer Range

D27INC 100-277Vac 50/60 > 0.90 ≤20% < 10A max @ 120Vac 700mA -30° C ~ 60°C(-22° F ~ 140°F) Incandescent 10-100%



RELEASED


SUB-2651-00

POWER PIPE II™ SYSTEM

Constant Current Driver

"B" Cap

Side View - Stake (S)

"C" Cap

5 1/2"(140mm)

2 7/8" O.D. (73mm)2 1/4" I.D. (57mm)

PVC Housing

7/8"(22mm)

6" Dia (152mm)Stability Flange

(Optional)

6" Dia(152mm)

22.5°

5/16"Dia(8mm) 4 13/16" B.C.

(122mm)

Stability Ring

2-7/8" Dia(73mm)

3 1/4" Dia.(83mm)

(2) 3/4" CPVC ConduitSlip Connectors

(13mm)

3 3/16" Dia.(81mm)

7/8" Dia

Fixture Mounting Hole

7/8"(22mm)

3 3/16" Dia.(81mm)

7/8"(22mm)

12" (305mm)or

18" (457mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

(22mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

7/8"


3 1/4" Dia Cap(81mm)

18 Inch only as per PPII for Driver

(22mm)

3 1/4" Dia.(83mm)


(13mm)

Specify Fixture Separately

Specify FixtureSeparately


12" (305mm)or

18" (457mm)

12" (305mm)or

18" (457mm)

7/8"(22mm)


(Optional)



CATALOG NUMBER LOGIC

THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION OF TEKA ILLUMINATION AND ITS RECEIPT OR POSSESSION DOES NOT CONVEY ANY RIGHTS TO REPRODUCE, DISCLOSE ITS CONTENTS, OR TO MANUFACTURE, USE OR SELL ANYTHING IT MAY DESCRIBE. REPRODUCTION, DISCLOSURE OR USE WITHOUT SPECIFIC WRITTEN AUTHORIZATION OF TEKA ILLUMINATION IS STRICTLY FORBIDDEN.



RELEASED


SUB-2656-00

DRIVER ELECTRICAL DATA TYPE AC INPUT

RANGEFREQUENCY

HZ DIMMING POWER FACTORAT FULL LOAD THD OPERATING AMBIENT

TEMPERATURE DIMMER TYPE DIMMERRANGE

IN RUSHCURRENT

D27INC 100-277 50/60 YES >0.90 ≤20% -30°C to 60°C (-22°F to 140°F) Incandescent 10-100% <10A

PROJECT:

TYPE:

CATALOG NUMBER:

SOURCE: LED - Power of ‘X’ Technology with Chip On Board Construction

NOTES:

MTBPPII D27INC

PPII D27INC B MT

Example PPII - S12 - D27INC - B - MT - SF

SeriesPPII - Power Pipe II™ System

(Specify Fixture separately. Available with Aluminum Fixture only.)

TypeS12 - 12" Stake*

J12 - 12" Junction Box*

S18 - 18" Stake*

J18 - 18" Junction Box*

* Includes 12" or 18” Power Pipe with Driver Housing

Driver Type For use with Incandescent Dimmer. 120V only for Dimming: D27INC - 27W Dimming Driver

Cap StyleB - Single Hole Cap

Input VoltageMT - 120-277 VAC Input

OptionSF - Stability Flange

GreenSource Initiative™Metal and packaging components are made from recycled materials. Manufactured using renewable solar energy, produced on site. Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Packaging contains no chlorofluorocarbons (CFC’s). Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.tekaillumination.com/greensource for program requirements. InstallationProvides a clean, architectural transition from wiring system to fixture. 2" Schedule 80 PVC pipe. For direct burial into soil or concrete. Available in 12" or 18" length. Available in two installation types:

Stake (Type S)60° angled bottom designed for use with conduit.

Junction Box (Type J)Includes [2] 3/4” PVC slip connectors for branch circuit wiring.

Stability FlangeOptional 6” diameter, molded stability flange simplifies installation and projects into substrate to simplify installation and reinforce housing stability. Cap StyleMachined from copper-free aluminum. Single Hole (‘B’) cap styles.

Driver HousingFully machined from copper-free aluminum. Stainless steel hardware. High temperature, silicone ‘O’ Ring provides watertight seal.

DriverFor use with 700mA (D27), Class A, constant current driver. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.94 Power Factor, <10.0A in-rush current, 0.25A input current, ≤5%THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection with auto recovery. EMC: FCC47CFR Part 15 Class B compliant. Dimming driver for use with standard incandescent dimmers. 10-100% range.

WiringTeflon® coated wire, 18AWG, 600V, 250° C rated and certified to UL 1659 standard.

HardwareTamper resistant, stainless steel hardware.

FinishStarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating. Finish to match fixture (specified separately.)

Warranty5 year limited warranty.

ListingsUL Listed. Certified to CAN/CSA/ANSI Standards. RoHs compliant. Made in USA.

®Teflon is a registered trademark of DuPont Corporation

STAKE (S) JUNCTION (J)

PROJECT:

TYPE:

SPECIFICATIONS

POWER PIPE II™ SYSTEM Constant Current Driver

"B" Cap


"C" Cap

5 1/2"(140mm)

2 7/8" O.D. (73mm)2 1/4" I.D. (57mm)

PVC Housing

7/8"(22mm)


(Optional)

6" Dia(152mm)

22.5°

5/16"Dia(8mm) 4 13/16" B.C.

(122mm)

Stability Ring

2-7/8" Dia(73mm)

3 1/4" Dia.(83mm)


(13mm)

3 3/16" Dia.(81mm)

7/8" Dia


7/8"(22mm)

3 3/16" Dia.(81mm)

7/8"(22mm)

12" (305mm)or

18" (457mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

(22mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

7/8"




(22mm)

3 1/4" Dia.(83mm)


(13mm)




12" (305mm)or

18" (457mm)

12" (305mm)or

18" (457mm)

7/8"(22mm)


(Optional)



"B" Cap


"C" Cap

5 1/2"(140mm)

2 7/8" O.D. (73mm)2 1/4" I.D. (57mm)

PVC Housing

7/8"(22mm)


(Optional)

6" Dia(152mm)

22.5°

5/16"Dia(8mm) 4 13/16" B.C.

(122mm)

Stability Ring

2-7/8" Dia(73mm)

3 1/4" Dia.(83mm)


(13mm)

3 3/16" Dia.(81mm)

7/8" Dia


7/8"(22mm)

3 3/16" Dia.(81mm)

7/8"(22mm)

12" (305mm)or

18" (457mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

(22mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

7/8"




(22mm)

3 1/4" Dia.(83mm)


(13mm)




12" (305mm)or

18" (457mm)

12" (305mm)or

18" (457mm)

7/8"(22mm)


(Optional)



"B" Cap


"C" Cap

5 1/2"(140mm)

2 7/8" O.D. (73mm)2 1/4" I.D. (57mm)

PVC Housing

7/8"(22mm)


(Optional)

6" Dia(152mm)

22.5°

5/16"Dia(8mm) 4 13/16" B.C.

(122mm)

Stability Ring

2-7/8" Dia(73mm)

3 1/4" Dia.(83mm)


(13mm)

3 3/16" Dia.(81mm)

7/8" Dia


7/8"(22mm)

3 3/16" Dia.(81mm)

7/8"(22mm)

12" (305mm)or

18" (457mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

(22mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

7/8"




(22mm)

3 1/4" Dia.(83mm)


(13mm)




12" (305mm)or

18" (457mm)

12" (305mm)or

18" (457mm)

7/8"(22mm)


(Optional)



‘B’ Cap (Single Hole)

CAP STYLE

"B" Cap


"C" Cap

5 1/2"(140mm)

2 7/8" O.D. (73mm)2 1/4" I.D. (57mm)

PVC Housing

7/8"(22mm)


(Optional)

6" Dia(152mm)

22.5°

5/16"Dia(8mm) 4 13/16" B.C.

(122mm)

Stability Ring

2-7/8" Dia(73mm)

3 1/4" Dia.(83mm)


(13mm)

3 3/16" Dia.(81mm)

7/8" Dia


7/8"(22mm)

3 3/16" Dia.(81mm)

7/8"(22mm)

12" (305mm)or

18" (457mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

(22mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

7/8"




(22mm)

3 1/4" Dia.(83mm)


(13mm)




12" (305mm)or

18" (457mm)

12" (305mm)or

18" (457mm)

7/8"(22mm)


(Optional)



"B" Cap


"C" Cap

5 1/2"(140mm)

2 7/8" O.D. (73mm)2 1/4" I.D. (57mm)

PVC Housing

7/8"(22mm)


(Optional)

6" Dia(152mm)

22.5°

5/16"Dia(8mm) 4 13/16" B.C.

(122mm)

Stability Ring

2-7/8" Dia(73mm)

3 1/4" Dia.(83mm)


(13mm)

3 3/16" Dia.(81mm)

7/8" Dia


7/8"(22mm)

3 3/16" Dia.(81mm)

7/8"(22mm)

12" (305mm)or

18" (457mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

(22mm)

5 1/2"(140mm)

3 1/4" Dia. (83mm)

7/8"




(22mm)

3 1/4" Dia.(83mm)


(13mm)




12" (305mm)or

18" (457mm)

12" (305mm)or

18" (457mm)

7/8"(22mm)


(Optional)



Bottom View of “J”

All dimensions indicated on this submittal are nominal. Contact Technical Sales if you require more stringent specifications.



RELEASED


SUB-2656-00

liberty floodlight (lbf)

Documents