lighting 2
DESCRIPTION
Street Pole specsTRANSCRIPT
Street Lighting Poles
>> Australia’s leading manufacturer of quality pole products with representation in every state and territory.
INGAL EPS is a division of Industrial Galvanizers Corporation Pty Ltd which is ultimately owned by Valmont Industries Inc. Actively involved in the Australian pole market since 1969, INGAL EPS has strived to continuously lead the industry in research, design, innovation, quality of product and quality of service. Establishing industry benchmarks such as the Seesaw pole, 60km/h and 110km/h Impact Absorbing poles and the largest steel poles ever installed in both Australia and New Zealand.
The company employs around 150 staff and has offices located in every state and territory of Australia and on the North Island of New Zealand. With manufacturing facilities in Brisbane and Perth and full access to three modern facilities in China owned by Valmont Industries Inc, INGAL EPS is well positioned to meet the broad requirements of the pole market. Due to our extensive experience, national coverage, resources and manufacturing capacity we have the ability to provide the most comprehensive product range available.
The INGAL EPS product range includes:
• Street Lighting poles
• Floodlighting poles
• Power poles
• Lowering Systems, for ease of maintenance
• Special Application poles including banner poles, camera poles, traffic signal and communication poles
• Services & Accessories providing individual design, drafting, installation and accessories including foundation materials, adaptors, headframes and cross arms.
With our dedicated design service, material control, quality assured manufacturing processes and after sales service, INGAL EPS has established itself as Australasia’s largest pole supplier. INGAL EPS has over four decades of experience leading the industry in Australia and our ever improving product range and expanded manufacturing resources will continue to ensure we’re at the cutting edge of providing new and innovative solutions to a growing and ever more demanding market.
Avenue Pole
STrEET LIGhTING PoLES | PAGe 5
AvenueINGAL EPS design and manufactures street lighting poles for Category P & V lighting requirements. The Avenue range of poles are predominantly designed for Category P (pedestrian) and are ideally suited for use in residential subdivisions, commercial developments, recreational pathways and parks.
options and Accessories• Avenue Street Lighting poles are base plate mounted as standard but can be designed for in-ground mounting• The poles are hot dip galvanized and can be powder coated or painted in the colour of your choice• The range is available in tapered octagonal only• Standard mounting heights are 5.5m to 12m• Standard outreach lengths are 1.5m to 3m• The standard poles are depicted on this product sheet, however they can be designed for differing heights and outreach lengths• Avenue poles are also available in a Seesaw configuration, refer to the Lowering Systems brochure for further information.• Preassembly• Pre cabling• Installation
Product Codes For more information, please refer to the Technical Data Sheet.
Avenue (Tapered Octagonal)
5.5m 6.5m 7.5m 9m 10.5m 12m
SAl55FSo15 SAl65FSo15 SAl75FSo15 SAl9FSo15 SAl105FSo15 SAl12FSo15SAl55FSo20 SAl65FSo20 SAl75FSo20 SAl9FSo20 SAl105FSo20 SAl12FSo20SAl55FSo30 SAl65FSo30 SAl75FSo30 SAl9FSo30 SAl105FSo30 SAl12FSo30SAl55FDo15 SAl65FDo15 SAl75FDo15 SAl9FDo15 SAl105FDo15 SAl12FDo15SAl55FDo20 SAl65FDo20 SAl75FDo20 SAl9FDo20 SAl105FDo20 SAl12FDo20SAl55FDo30 SAl65FDo30 SAl75FDo30 SAl9FDo30 SAl105FDo30 SAl12FDo30
S=Street lighting A=Avenue l=light Duty F=Flange Mounted (Base Plate) R=Tapered Round S=Single outreach D=Double outreach o=Tapered octagonal
Standard Avenue Poles
PAGe 6 | STrEET LIGhTING PoLES
FreewayThe Freeway Street Light range was inspired by the need for greater outreach over wide roadways. The predominantly Category V (vehicular) designed poles are ideally suited for multi-laned roads. The range is an extension of the tapered octagonal Avenue range of poles but, utilises a heavy-duty shaft allowing for outreaches up to 4.5m in length.
options and Accessories• The Freeway Street Light range is base plate mounted as standard but can be designed for in-ground mounting• The poles are hot dip galvanized and can be powder coated or painted in the colour of your choice• The range is available in tapered octagonal only• Standard mounting heights are 10.5m to 12m• Standard outreach lengths are 1.5m to 4.5m• The standard poles are depicted on this product sheet, however they can be designed for differing height and outreach lengths• Preassembly• Pre cabling• Installation
Product Codes For more information, please refer to the Technical Data Sheet.
Freeway
10.5m 10.5m 12m 12m
SFl105FSo15 SFl105FDo15 SFl12FSo15 SFl12FDo15
SFl105FSo20 SFl105FDo20 SFl12FSo20 SFl12FDo20
SFl105FSo30 SFl105FDo30 SFl12FSo30 SFl12FDo30
SFl105FSo45 SFl105FDo45 SFl12FSo45
S=Street lighting F=Freeway l=light Duty F=Flange Mounted (Base Plate) S=Single outreach D=Double outreach o=Tapered octagonal
Freeway Poles Standard Freeway Poles
FReewAy Pole
IMPAcT ABSoRBInG Pole
STrEET LIGhTING PoLES | PAGe 9
Impact AbsorbingINGAL EPS has been the largest supplier of street light poles to Australian road, power and council organisations and their contractors for over 40 years. often being the original designer of the Impact Absorbing poles they now refer to as their own.
Impact Absorbing pole shaft Typical Impact Absorbing Pole
INGAL EPS have been design and manufacturing Impact Absorbing poles since 1979, and were the first to have the designs tested to the relevant standard (AS/NZS 1158.1.3) for both 60km/h and 110km/h zones. Under design criteria and circumstances, the poles will stop a vehicle and minimise the force on the vehicle’s occupants. The pole remains attached to the base structure and absorbs impact energy progressively, entrapping the impacting vehicle as the pole deforms. An impact absorbing pole looks similar to a normal rigid pole but features innovative vertical slots at the base to create a cushioning effect if the pole is hit by a vehicle. Standard height and outreach lengths vary according to relevant authority specifications.
options and Accessories• Impact Absorbing poles can be either base plate or
in-ground mounted• The poles are hot dip galvanized and can be powder
coated or painted in the colour of your choice• Available in tapered round and tapered octagonal• Mounting heights and outreach lengths vary according to
the relevant authority’s specification• Standard Australian road and power authority poles are
depicted on this product sheet, however varying heights and outreach lengths can be designed for your application
• Design, testing and certifying of Impact Absorbing pole designs• Preassembly• Pre cabling• Installation
organisations we supply Impact Absorbing Poles for include:
• ActewAGL (ACT)• Adelaide City Council (SA)• Aurora Energy (Tas)• Country Energy (NSW) • Department of Transport, Energy & Infrastructure (SA)• Energy Australia (NSW)• ETSA Utilities (SA)• horizon Power (WA)• Integral Energy (NSW)• Jemena (Vic)• Main roads (WA)• NT roads (NT)• Powercor (Vic)• Power & Water (NT)• roads & Traffic Authority NSW (NSW)• SP AusNet (Vic)• Tenix Alliance (Vic)• Vicroads (Vic)• Western Power Corporation (WA)
PAGe 10 | STrEET LIGhTING PoLES
Slip BaseINGAL EPS has been the largest supplier of street light poles to Australian road, power and council organisations and their contractors for over 40 years. often being the original designer of the Slip Base poles they now refer to as their own.
close up of slip area Typical Slip Base arrangement
The revolutionary engineering design of Slip Base poles enables the pole to slip at the base and fall if a collision occurs. This ideally suits freeways and other high-speed roadways where the likelihood of a secondary accident, resulting from the falling pole, is accepted as being unlikely. The standard height and outreach lengths vary according to relevant authority specifications.
options and Accessories• Slip Base Poles are base plate mounted, either on an
in-ground section or concrete foundation• The poles are hot dip galvanized and can be powder coated
or painted in the colour of your choice• Slip Base poles are available in tapered round and
tapered octagonal• Standard Australian road authority poles are depicted on this
product sheet, however varying heights and outreach lengths can be designed for your application
• Design, testing and certifying of Slip Base Pole designs• Preassembly• Pre cabling• Installation
organisations we supply Slip Base Poles for include:
• Brisbane City Council (Qld)• Country Energy (NSW)• Department of Transport, Energy & Infrastructure (SA)• Energex (Qld)• Energy Australia (NSW) • Ergon Energy (Qld)• Jemena (Vic)• Main roads Qld (Qld)• Main roads (WA)• NT roads (NT)• Power & Water (NT)• Powercor (Vic)• roads & Traffic Authority NSW (NSW)• SP AusNet (Vic)• Tenix Alliance (Vic)• Vicroads (Vic)
Typical Slip Base arrangement
SlIP BASe Pole
STrE
ET L
IGh
TIN
G P
oLE
S |
PAG
e 12
Tech
nica
l Inf
orm
atio
nn
oM
InA
l H
eIG
HT
(m
)
cAT
Alo
Gu
e
no.
Pole
DIA
MeT
eRD
oo
R S
Ize
l x
w
(mm
)x(m
m)
BolT
SM
Ax
. To
P w
eIG
HT
(k
g)
MA
xIM
uM
All
ow
ABl
e SA
Il A
ReA
(M
2 )
ReG
Ion
- T
eRR
AIn
cAT
eGo
Ry (
AS1
170.
2)u
lT. B
ASe
M
oM
enT
(k
nm
)
ulT
. BA
Se
SHeA
R
(kn
)
wo
Rk
. BA
Se
Mo
Men
T
(kn
m)
wo
Rk
. BA
Se
SHeA
R
(kn
)
ScR
ew
PIle
Pole
w
eIG
HT
(k
g)To
P (m
m)
BoT.
(m
m)
A-2
A-3
B-2
B-3
c-2
c-3
D-2
D-3
Ave
nue
(Tap
ered
Oct
ago
nal S
ingl
e O
utre
ach)
5.5
SAl5
5FSo
1543
144
295
x 9
0 4
M20
@23
330
0.16
0.16
0.16
0.16
0.16
0.16
- 0.
1611
.03.
07.
32.
02A
465.
5SA
l55F
So20
4314
429
5 x
90
4M
20@
233
300.
160.
160.
160.
160.
160.
16-
0.16
11.0
3.0
7.3
2.0
2A49
5.5
SAl5
5FSo
3057
144
295
x 9
0 4
M20
@23
330
0.16
0.16
0.16
0.16
0.16
0.16
- -
11.0
3.0
7.3
2.0
2A54
6.5
SAl6
5FSo
1543
160
295
x 9
0 4
M20
@23
330
0.16
0.16
0.16
0.16
0.16
0.16
- 0.
1614
.03.
39.
32.
2n/
a57
6.5
SAl6
5FSo
2043
160
295
x 9
0 4
M20
@23
330
0.16
0.16
0.16
0.16
0.16
0.16
- -
14.0
3.3
9.3
2.2
n/a
606.
5SA
l65F
So30
5716
029
5 x
90
4M
20@
233
300.
160.
160.
160.
16-
0.16
- -
14.0
3.3
9.3
2.2
n/a
657.
5SA
l75F
So15
4315
129
5 x
90
4M
24@
350
300.
160.
160.
160.
160.
160.
16-
0.16
13.0
3.0
8.7
2.0
3A79
7.5
SAl7
5FSo
2043
151
295
x 9
0 4
M24
@35
030
0.16
0.16
0.16
0.16
- 0.
16-
- 13
.03.
08.
72.
03A
827.
5SA
l75F
So30
5715
129
5 x
90
4M
24@
350
300.
160.
160.
160.
16-
0.16
- -
13.0
3.0
8.7
2.0
3A87
9SA
l9FS
o15
4317
129
5 x
110
4M
24@
350
300.
160.
160.
160.
160.
160.
16-
0.16
20.2
3.0
13.5
2.0
3A10
69
SAl9
FSo
2043
171
295
x 1
10 4
M24
@35
030
0.16
0.16
0.16
0.16
- 0.
16-
- 20
.23.
013
.52.
03A
109
9SA
l9FS
o30
5717
129
5 x
110
4M
24@
350
300.
160.
160.
160.
16-
0.16
- -
20.2
3.0
13.5
2.0
3A11
410
.5SA
l105
FSo
1543
182
410
x 1
10 4
M24
@35
030
0.16
0.16
0.16
0.16
- 0.
16-
- 20
.23.
513
.52.
33A
127
10.5
SAl1
05FS
o20
4318
241
0 x
110
4M
24@
350
300.
160.
160.
160.
16-
0.16
- -
20.2
3.5
13.5
2.3
3A13
010
.5SA
l105
FSo
3057
182
410
x 1
10 4
M24
@35
030
0.16
0.16
0.16
0.16
- -
- -
20.2
3.5
13.5
2.3
3A13
512
SAl1
2FSo
1543
201
410
x 1
10 4
M24
@35
030
0.16
0.16
0.16
0.16
- 0.
16-
- 26
.54.
017
.72.
73B
151
12SA
l12F
So20
4320
141
0 x
110
4M
24@
350
300.
160.
160.
160.
16-
0.16
- -
26.5
4.0
17.7
2.7
3B15
412
SAl1
2FSo
3057
201
410
x 1
10 4
M24
@35
030
0.16
0.16
- 0.
16-
- -
- 26
.54.
017
.72.
73B
159
Ave
nue
(Tap
ered
Oct
ago
nal D
oub
le O
utre
ach)
5.5
SAl5
5FD
o15
4314
429
5 x
90
4M
20@
233
600.
160.
160.
160.
16-
0.16
- -
11.0
3.0
7.3
2.0
2A57
5.5
SAl5
5FD
o20
4314
429
5 x
90
4M
20@
233
600.
160.
160.
160.
16-
0.16
- -
11.0
3.0
7.3
2.0
2A61
5.5
SAl5
5FD
o30
5714
429
5 x
90
4M
20@
233
600.
160.
160.
160.
16-
0.16
- -
11.0
3.0
7.3
2.0
2A73
6.5
SAl6
5FD
o15
4316
029
5 x
90
4M
20@
233
600.
160.
160.
160.
16-
0.16
- -
14.0
3.3
9.3
2.2
n/a
686.
5SA
l65F
Do
2043
160
295
x 9
0 4
M20
@23
360
0.16
0.16
0.16
0.16
- -
- -
14.0
3.3
9.3
2.2
n/a
726.
5SA
l65F
Do
3057
160
295
x 9
0 4
M20
@23
360
0.16
0.16
- 0.
16-
- -
- 14
.03.
39.
32.
2n/
a88
7.5
SAl7
5FD
o15
4315
129
5 x
90
4M
24@
350
600.
160.
160.
160.
16-
- -
- 13
.03.
08.
72.
03A
897.
5SA
l75F
Do
2043
151
295
x 9
0 4
M24
@35
060
0.16
0.16
- 0.
16-
- -
- 13
.03.
08.
72.
03A
947.
5SA
l75F
Do
3057
151
295
x 9
0 4
M24
@35
060
0.16
0.16
- 0.
16-
- -
- 13
.03.
08.
72.
03A
106
9SA
l9FD
o15
4317
129
5 x
110
4M
24@
350
600.
160.
160.
160.
16-
0.16
- -
20.2
3.0
13.5
2.0
3A11
69
SAl9
FDo
2043
171
295
x 1
10 4
M24
@35
060
0.16
0.16
- 0.
16-
- -
- 20
.23.
013
.52.
03A
121
9SA
l9FD
o30
5717
129
5 x
110
4M
24@
350
60-
0.16
- -
- -
- -
20.2
3.0
13.5
2.0
3A13
310
.5SA
l105
FDo
1543
182
410
x 1
10 4
M24
@35
060
- 0.
16-
0.16
- -
- -
20.2
3.5
13.5
2.3
3A13
710
.5SA
l105
FDo
2043
182
410
x 1
10 4
M24
@35
060
- 0.
16-
- -
- -
- 20
.23.
513
.52.
33A
142
10.5
SAl1
05FD
o30
5718
241
0 x
110
4M
24@
350
60-
0.16
- -
- -
- -
20.2
3.5
13.5
2.3
3A15
4
no
MIn
Al
HeI
GH
T
(m)
cAT
Alo
Gu
e
no.
Pole
DIA
MeT
eRD
oo
R S
Ize
l x
w
(mm
)x(m
m)
BolT
SM
Ax
. To
P w
eIG
HT
(k
g)
MA
xIM
uM
All
ow
ABl
e SA
Il A
ReA
(M
2 )
ReG
Ion
- T
eRR
AIn
cAT
eGo
Ry (
AS1
170.
2)u
lT. B
ASe
M
oM
enT
(k
nm
)
ulT
. BA
Se
SHeA
R
(kn
)
wo
Rk
. BA
Se
Mo
Men
T
(kn
m)
wo
Rk
. BA
Se
SHeA
R
(kn
)
ScR
ew
PIle
Pole
w
eIG
HT
(k
g)To
P (m
m)
BoT.
(m
m)
A-2
A-3
B-2
B-3
c-2
c-3
D-2
D-3
Ave
nue
(Tap
ered
Oct
ago
nal D
oub
le O
utre
ach)
- Co
ntin
ued
12SA
l12F
Do
1543
201
410
x 1
10 4
M24
@35
060
- 0.
16-
0.16
- -
- -
26.5
4.0
17.7
2.7
3B16
112
SAl1
2FD
o20
4320
141
0 x
110
4M
24@
350
60-
0.16
- -
- -
- -
26.5
4.0
17.7
2.7
3B16
612
SAl1
2FD
o30
5720
141
0 x
110
4M
24@
350
60-
0.16
- -
- -
- -
26.5
4.0
17.7
2.7
3B17
8
The
max
imum
top
wei
ght
has
been
allo
wed
for
in a
ll ca
ses
to d
eter
min
e th
e m
axim
um s
ail a
rea.
Free
way
(Ta
pere
d O
ctag
ona
l Sin
gle
Out
reac
h)
10.5
SFl1
05FS
o15
9621
646
0 x
130
4M24
@35
030
0.16
0.16
0.16
0.16
0.16
0.16
- -
28.5
4.6
19.0
3.1
3B15
810
.5SF
l105
FSo
2090
216
460
x 1
304M
24@
350
300.
160.
160.
160.
16-
0.16
- -
28.5
4.6
19.0
3.1
3B16
210
.5SF
l105
FSo
3079
216
460
x 1
304M
24@
350
300.
160.
160.
160.
16-
0.16
- -
28.5
4.6
19.0
3.1
3B16
810
.5SF
l105
FSo
4563
214
460
x 1
304M
24@
350
300.
160.
16-
0.16
--
- -
28.5
4.6
19.0
3.1
3B17
212
SFl1
2FSo
1596
235
460
x 1
304M
24@
350
300.
160.
160.
160.
16-
0.16
- -
37.0
4.6
24.7
3.1
n/a
187
12SF
l12F
So20
9023
546
0 x
130
4M24
@35
030
0.16
0.16
0.16
0.16
-0.
16-
- 37
.04.
624
.73.
1n/
a19
012
SFl1
2FSo
3079
235
460
x 1
304M
24@
350
300.
160.
160.
160.
16-
--
- 37
.04.
624
.73.
1n/
a19
712
SFl1
2FSo
4563
232
460
x 1
304M
24@
350
300.
160.
16-
0.16
--
- -
37.0
4.6
24.7
3.1
n/a
199
Free
way
(Ta
pere
d O
ctag
ona
l Do
uble
Out
reac
h)
10.5
SFl1
05FD
o15
9621
646
0 x
130
4M24
@35
060
-0.
16-
0.16
--
--
28.5
4.6
19.0
3.1
3B17
810
.5SF
l105
FDo
2090
216
460
x 1
304M
24@
350
600.
160.
16-
0.16
--
--
28.5
4.6
19.0
3.1
3B18
510
.5SF
l105
FDo
3079
216
460
x 1
304M
24@
350
600.
160.
16-
--
--
-28
.54.
619
.03.
13B
198
10.5
SFl1
05FD
o45
6821
446
0 x
130
4M24
@35
060
-0.
16-
--
--
-28
.54.
619
.03.
13B
210
12SF
l12F
Do
1596
235
460
x 1
304M
24@
350
600.
160.
16-
0.16
--
--
37.0
4.6
24.7
3.1
n/a
207
12SF
l12F
Do
2090
235
460
x 1
304M
24@
350
60-
0.16
-0.
16-
--
-37
.04.
624
.73.
1n/
a21
412
SFl1
2FD
o30
7923
546
0 x
130
4M24
@35
060
-0.
16-
--
--
-37
.04.
624
.73.
1n/
a22
7
The
max
imum
top
wei
ght
has
been
allo
wed
for
in a
ll ca
ses
to d
eter
min
e th
e m
axim
um s
ail a
rea.
The
se c
olum
ns a
re n
ot r
ecom
men
ded
to b
e su
pplie
d w
ith c
limbi
ng r
ungs
.
SlIP BASe PoleS, ReID HIGHwAy PeRTH
STrEET LIGhTING PoLES | PAGe 15
>> STReeT lIGHTInG PoleS >> FlooDlIGHTInG PoleS >> PoweR PoleS
>> loweRInG SySTeMS >> SPecIAl APPlIcATIon PoleS >> SeRvIceS & AcceSSoRIeS
To view our entire product range, or for the most up to date product information, please visit our comprehensive on-line catalogue at www.ingaleps.com.au
