lv phase and circuit identifier
DESCRIPTION
Al Buraq Electric & Tools L.L.C ---- Your All in One Destination In 2004, when Al Buraq Hardware & Tools was started as a small family-owned business, we made a commitment to provide working people with great quality tools at the lowest prices. And for over 10 years, Al Buraq Hardware & Tools has done just that. From hand tools and generators, to air and power tools, from shop equipment to automotive tools, Al Buraq offers more than 20,000 tools and accessories at quality levels that match or exceed competing brands. We buy directly from the factories and we sell directly to you to enjoy the savings and the very high quality standards products. Now Al Buraq Hardware & Tools L.L.C in the UAE is following the guidance of HH Sheikh Mohamed Bin Rashed Al Maktoom to move Dubai Government to a smart Government we decided to have our E-SHOWROOM where the client can enjoy preparing the LPO directly from our website using his username and password. What do we have in our E-SHOWROOM? - Electrical Safety Products: industrial safety helmet for linemen, safety helmet for linemen with short visor, safety helmet with integrated face screen for electricians, Electrician face shield with headband and brow-guard, Arc-Flash protective face shield, helmet for use in the forestry industry, safety cap, glasses, headgears, safety shoes, safety boots, insulating mats, work gears, high-visibility garments, rain protection, climbing equipment, harnesses, energy absorbers, fall arresters, anchorage, connectors, lanyards, sets, rescue devices, latex gloves, composite chlorinated gloves, leather gloves, handling leather gloves, preliminary identification of cables and phases, no-voltage testing / absence of voltage testing, earthing and short-circuiting, earthing stickes, insulating tools 1000 V, cable cutters, shunt, repowering, network controlling and measuring equipment, substation equipment, (FAMECA, Sibille Safe, Jegou industries, Technowill) [email protected]TRANSCRIPT
Insulated dead Cable identification FC2300 (+FC2100)
Insulated dead Cable identification FC2300 (+FC2100)
Reliability : strongs connectors
Field and transportation protected : Heavy duty polypro case.
Operating instructions always at hand in the box
One probe one function
Go / No goindication
Availability : mains or battery powered
Insulated dead Cable identification FC2300 (+FC2100)
■ Functions of the dead cable identification
This device provides all the indications necessary on a jobsite on a disconnected, earthed power cable up to 10 km long :
Identification of three-phase power cables in open trenches. Identification of the tree phase conductors on 3-pole or single-pole
cables. Continuity with the end of the cable earthed. There is a probe for each function : the detector identifies the probe and
adjusts to the function :- Continuity testing- Colour/phase conductor identification- Identification of polymer insulated cable- Identification of paper insulation lead covered cable- Colour/phase conductor identification on cut cables, compass probe.
Insulated dead Cable identification FC2300 (+FC2100)
■ Specifications of the LV Phase and Circuit Identifier
TransmitterWorks on up to 10 km on a cable with a cross-section of 240 mm²
3 injection clamps, L1, L2 and L3, opening : 50mm Max. length of voice message 3.4 s Transmission cycle : 7 s Battery life 8 to 9 hrs. Full charge in 5 hrs Injection current 6 mA at 300 mA Batteries 8.75 V (7 x 1.25 V, NiMH) Battery charger AC 100-240 V – 50-60 Hz – 0.5 A/ DC 12 V Detection frequency 580Hz, 620Hz, 680Hz Audio dual-tone frequencies 1280 Hz, 1310 HzDetector : 3 setting levels according to the length and type of cable. Dedicated probes for each function.
Insulated dead Cable identification FC2300 (+FC2100)
■ Specifications of the LV Phase and Circuit Identifier
Comes in shockproof polymer carry case : detachable injection module, to be left in the substation.Weight of complete case : 11 kg. Dimensions : 475 x 415 x 215 mm.Transmission clamps :
Injection, into each of the 2 phases L1 and L3 of the cable, of signals compatible with the FC2000 range of cable identifiers.
Power supply : rechargeable battery integrated in each clamp Battery life more than 8 hours, for a full charge time of 3 hours.
Detector : Detection by direct contact the cores of the cut cables using a “compass”
Type probe : Phases ABC are directly displayed by diodes (green for L1, yellow for L2 and red for L3) Standalone power supply with 4 AA batteries. Battery capacity more than 1,000 measurements. Weight : 2 kg
■ Standard and Environment
Insulated dead Cable identification FC2300 (+FC2100)
AFNOR C18 510
This secure cable identifier is now part of the safety procedure called “secure identification” underground equivalent to overhead line Voltage detection.
The secure identification includes: Electronic identification complying with cable disconnected and
earthed on both ends (LV, HV) Spiking and cutting of the cable Continuity checking between transmitter and cable section in the
trench.
FAMECA ACTIVITY
• Improve safety of network maintenance operations
• Insulating tube manufacturing in house: condition for customer confidence
• Listen to market demand
• Final product design and manufacturing
• The best of safety and value at a competitive price
All our products help utilities to face global challenges providing high safety level for electrical network improvement operations:Preparation / safetyEfficiency / Availability
THE NETWORK WILL CHANGE !
THE NETWORK WILL CHANGE !
THE NETWORK WILL CHANGE !
Work in total confidence
with your powernetwork
HISTORY & FIGURES
1949: creation of the company to supply earthing devices to “compagnie du Rhin”
1960: creation of the French LiveW competence Center (SERECT) in Mulhouse
1989: building of this building specialy designed around high voltage laboratory
1998: integration in Novarc Group 4800 m², 3500 references, TOP80% 1500 ref / 40 products 330 suppliers, 2M components, 200k end products ISO 9002 in 1996, ISO 9001 since 2002 Export rate > 65% in more than 100 countries
