m-08-02 heat exchanger solution guide - process …€¦ · · 2017-11-29solution type of heat...
TRANSCRIPT
M-08-02Revision - Date: 00 - 05/29/08
7010 Lindsay Dr. • Mentor, OH 44060 U.S.A. • United States/Canada: 800-621-1998 • 440-974-1300 • Fax: 440-974-9561 www.processtechnology.com • E-mail: [email protected]
D6
SOLUTION TYPE OF HEAT EXCHANGERAcetic ................................... Fluoropolymer, Hastelloy C®, or ZirconiumActane 70, 80 ............................................................... FluoropolymerActane Salt ...................................................................... FluoropolymerAcid Sulfate ......................................................................... FluoropolymerAlcorite ............................................................................. FluoropolymerAlkaline Cleaners (Electrified)...................................... 316 Stainless SteelAlkaline Soaking Cleaners .......................................... 316 Stainless SteelAlodine (most formulas) ............................................ 316 Stainless SteelAlstan .......................................................................... 316 Stainless SteelAluminum Bright Dip ........................................................ FluoropolymerAluminum Cleaners .................................................... 316 Stainless SteelAluminum Chloride ............................................................... FluoropolymerAluminum Sulfate ....................................................... 316 Stainless SteelAmmonia ..................................................................... 316 Stainless SteelAmmonia Persulfate ......................................................... FluoropolymerAmmonium Bi Fluoride....................................................... FluoropolymerAmmonium Chloride ................................................................... TitaniumAmmonium Nitrate ................................ 316 Stainless Steel or TantalumAnodizing (Aluminum)....................................................... FluoropolymerARP 28, 80 Blackening Salts........................................... FluoropolymerArsenic ....................................................................... 316 Stainless SteelBarium Chloride ......................................................................... TitaniumBenzoic Acid ............................................................................. TitaniumBlack Nickel ...................................................................... FluoropolymerBlack Oxide (Hi-Temp) ............................................... 316 Stainless SteelBlack Oxide (Low-Temp) .......................................................... TitaniumBonderizing ................................................................ 316 Stainless SteelBoric Acid ................................................................................. TitaniumBrass Cyanide ........................................................... 316 Stainless SteelBright Nickel ................................................... Fluoropolymer or TitaniumBright Copper Cyanide .............................................. 316 Stainless SteelBronze (Alkaline)........................................................ 316 Stainless SteelBrown Oxide ............................................................................. TitaniumBurnite .............................................................................. FluoropolymerButyric Acid .............................................................................. TitaniumCadmium Black ................................................................. FluoropolymerCadmium (Alkaline) .................................................... 316 Stainless SteelCadmium Fluoborate ........................................................ FluoropolymerCalcium Chloride ................................................... Titanium or ZirconiumCalcium Hypochlorite ................................................................. TitaniumCarbonic Acid ........................................................................... TitaniumCaustic Etch ...................................................................................... SteelCaustics ............................................................................................ SteelCaustics (highly concentrated 20% and over) ................................. SteelChlorine/Wet ..................................................................... FluoropolymerChloride .......................................................... Fluoropolymer or TitaniumChlorosulfuric Acid ................................................................... TitaniumChromic Anodizing ........................................................... FluoropolymerChromic Acetate .............................................................. FluoropolymerChromic Nickel ..................................................................... FluoropolymerChromium (No Fluorides) .............................. Fluoropolymer or TitaniumChromium (Fluoride) ................................. Columbium or FluoropolymerCitric Acid .................................................................................. TitaniumClear Chromate ................................................................ FluoropolymerCobalt Nickel .................................................. Fluoropolymer or Titanium
SOLUTION TYPE OF HEAT EXCHANGERCobalt Plating ............................................................. 316 Stainless SteelCobra Etch ........................................................................... FluoropolymerCopper Acid ..................................................................... FluoropolymerCopper Bright Acid .......................................................... FluoropolymerCopper Cyanide ......................................................... 316 Stainless SteelCopper Fluoborate ........................................................... FluoropolymerCopper Pyrophosphate .............................................. 316 Stainless SteelCopper Strike ............................................................. 316 Stainless SteelCopper Sulfate ................................................................. FluoropolymerCyanide ...................................................................... 316 Stainless SteelDeionized Water ................................... 316 Stainless Steel or TitaniumDeoxidizer (Etching) ..................................................... FluoropolymerDeoxidizer Non-Chromated ........................................ 316 Stainless SteelDichromic Seal .................................................................................. SteelDiethylene Glycol ....................................................... 316 Stainless SteelDiversey, 511, 514 .......................................................... FluoropolymerDow Therm ................................................................ 316 Stainless SteelDye Solutions ............................................................. 316 Stainless SteelEbonal C .................................................................................... TitaniumElectroless Copper .......................................................... FluoropolymerElectroless Nickel .......................................... Fluoropolymer or TitaniumElectroless Tin (Acid) ...................................................... FluoropolymerElectroless Tin (Alkaline) ........................................... 316 Stainless SteelElectro Cleaner .......................................................... 316 Stainless SteelElectro Polishing ............................................................... FluoropolymerEnthone 80 Acid .............................................................. FluoropolymerEthylene Glycol .................................................................................. SteelFerric Ammonium Oxide ......................................... 316 Stainless SteelFerric Chloride ............................................... Fluoropolymer or TitaniumFerric Nitrate ......................................... 316 Stainless Steel or TitaniumFerric Sulfate ........................................ 316 Stainless Steel or TitaniumFluoborate ........................................................................ FluoropolymerFormic Acid .............................................................. 316 Stainless SteelGlycerol .................................................................... 316 Stainless SteelImmersion Gold ......................................................... 316 Stainless SteelGold-Acid ....................................................... Fluoropolymer or TitaniumGold Cyanide ............................................................ 316 Stainless SteelGrey Nickel .................................................... Fluoropolymer or TitaniumHot Seal Dichromate ................................................ 316 Stainless SteelHydrochloric Acid ........................................ Fluoropolymer or TantalumHydrofluoric Acid ............................................................. FluoropolymerHydrogen Peroxide ........................................ Fluoropolymer or TitaniumIndium ............................................................................... FluoropolymerIridite (4-75,4-73,14,14-2,14-9)................................. 316 Stainless SteelIridite (1,2,3,4-C,7,8,15) ................................................... FluoropolymerIron Fluoborate ................................................................. FluoropolymerIron Phosphate ......................................................... 316 Stainless SteelIsoprep (186,187,188) ............................................. 316 Stainless SteelIsoprep Acid Salts ........................................................... FluoropolymerJetal .......................................................................... 316 Stainless SteelLead Acetate ........................................................... 316 Stainless SteelLime Saturated Water (Alkaline) ............................. 316 Stainless SteelLinseed Oil ................................................................. 316 Stainless SteelMagnesium Hydroxide ............................................... 316 Stainless SteelMagnesium Nitrate ........................................................... Fluoropolymer
ENGINEERING DATAExchanger Solution Guide
M-08-02Revision - Date: 00 - 05/29/08
7010 Lindsay Dr. • Mentor, OH 44060 U.S.A. • United States/Canada: 800-621-1998 • 440-974-1300 • Fax: 440-974-9561 www.processtechnology.com • E-mail: [email protected]
SOLUTION TYPE OF HEAT EXCHANGERManganese Phosphate ............................................ 316 Stainless SteelMcDermid 629 ................................................................ FluoropolymerMercuric Chloride ...................................................................... TitaniumMuriatic Acid ................................................ Fluoropolymer or TantalumNickel (Plating Solution) (Watts) ................... Fluoropolymer or TitaniumNickel Acetate Seal ................................................. 316 Stainless SteelNickel Chloride ........................................................................... TitaniumNitric Acid ................................................... Fluoropolymer or ZirconiumNitric Hydrochloric Acids ................................................ FluoropolymerNitric Phosphoric ................................................................. FluoropolymerOil ...................................................................................................... SteelOleic Acid ....................................................................... FluoropolymerOxalic Acid ..................................................................... FluoropolymerPaint Stripper (Alkaline) ........................................... 316 Stainless SteelPerchlorethylene ....................................................... 316 Stainless SteelPhosphoric Acid (No Fluoride) ..................... Fluoropolymer or TantalumPhosphate Cleaner ................................................... 316 Stainless SteelPhosphate ................................................................. 316 Stainless SteelPotassium Acid Sulfate .................................................. FluoropolymerPotassium Cyanide ................................................... 316 Stainless SteelPotassium Hydroxide ............................................... 316 Stainless SteelPotassium Hydrochloric .................................................. FluoropolymerPotassium Permanganate .............................. Fluoropolymer or TitaniumRhodium .......................................................................... FluoropolymerRochelle Salt Cyanide ............................................... 316 Stainless SteelRuthenium Plating............................................................. FluoropolymerSalt (Actine) ........................................................................ FluoropolymerSea Water ........................................................... Titanium or ZirconiumSilver Bromide .......................................................... 316 Stainless SteelSilver Cyanide .......................................................... 316 Stainless SteelSilver Lume .............................................................. 316 Stainless SteelSilver Nitrate ............................................................. 316 Stainless SteelSodium Bisulfate ............................................................ FluoropolymerSodium Carbonate ..................................................................... Titanium
SOLUTION TYPE OF HEAT EXCHANGERSodium Chlorate ........................................................................ TitaniumSodium Chloride ........................................................................ TitaniumSodium Cyanide ....................................................... 316 Stainless SteelSodium Dichromate (Hot Seal) ................................ 316 Stainless SteelSodium Hydroxide ............................................................................. SteelSodium Hypochlorite ........................................................ FluoropolymerSodium Persulfate ............................................................ FluoropolymerStannate ............................................................................................ SteelStanostar ........................................................................ FluoropolymerStearic Acid ........................................................................ FluoropolymerSulfamate Nickel ............................................ Fluoropolymer or TitaniumSulfur .............................................................................. FluoropolymerSulfur Peroxide .............................................................. FluoropolymerSulfuric Acid .................................................................. FluoropolymerSulphamic Acid .............................................................. FluoropolymerTannic Acid ............................................................................... TitaniumTin Nickel ........................................................................ FluoropolymerTin Plating (Acid)(Stanus/Sulphate) ................................ FluoropolymerTin Plating Acid (Fluoborate) ........................................... FluoropolymerTin Plating (Alkaline) ................................................ 316 Stainless SteelTrichlorethylene ........................................................ 316 Stainless SteelTrioxide (Pickle) ............................................................... FluoropolymerTurco (4181, 4338) ................................................. 316 Stainless SteelUnichrome ....................................................................... FluoropolymerWater ........................................................................ 316 Stainless SteelWood’s Nickel Strike ....................................................... Fluoropolymer Yellow Dichromate ........................................................... FluoropolymerZinc Acid ....................................................... Fluoropolymer or TitaniumZinc Ammonium Chloride .............................. Fluoropolymer or TitaniumZinc Cyanide ............................................................ 316 Stainless SteelZinc Phosphate ........................................................ 316 Stainless SteelZinc Phosphate (Fluoride)............................................... FluoropolymerZincate ...................................................................... 316 Stainless Steel
THE DATA LISTED IS PROVIDED GRATIS AND IS OFFERED AS A GUIDE ONLY. IT IS NOT INTENDED TO BE USED ASTHE SOLE BASIS OF DESIGN OR TO ESTABLISH SPECIFICATION LIMITS. PROCESS TECHNOLOGY AS-SUMES NO OBLIGATION OR LIABILITY FOR ANY ADVICE FURNISHED BY IT OR FOR RESULTS OBTAINEDFROM USE. DUE TO THE COMPLEXITIES OF SOLUTIONS AND APPLICATIONS, IT IS THE CUSTOMER’SRESPONSIBILITY TO CONTACT THEIR CHEMICAL SUPPLIER FOR HEAT EXCHANGER MATERIAL COM-PATIBILITY AND RECOMMENDATIONS.
PLEASE ENSURE APPLICABILITY OF HEAT EXCHANGER BEFORE INSTALLATION SINCE WE CANNOTGUARANTEE HEAT EXCHANGERS AGAINST PREMATURE FAILURE DUE TO CORROSION OR CHEMICALDESTRUCTION CAUSED BY UNUSUAL CONDITIONS OVER WHICH WE HAVE NO CONTROL, SUCH AS:
▪ Excessively high solution temperatures.▪ The concentration of the solution.▪ The presence of inhibitors.▪ The presence of other acids causing a secondary reaction.▪ Stray electrical currents.▪ Flux floating on the surface.▪ The presence of dissolved gases.
▪ Excessive sludge build-up.▪ Stagnant or turbulent flow of the solution.▪ Aeration.▪ Presence of oxygen or an oxidizing agent in the solution.▪ Erosion.▪ High pressures.▪ Vacuum conditions.
Hastelloy C® is a registered trademark of Haynes International, Inc.