m-power sine wave dc to ac inverters

www.merlinequipment.com 19 M -Power Inverters simply and silently convert 12V DC battery power to 230V AC electricity. Ideal for operating mains powered devices on board boats and vehicles. Merlin Equipment was the first in the UK to introduce high frequency inverters to the UK twenty years ago. This experience translates into a highly efficient and reliable range today. M-Power employs state of the art switch-mode power conversion techniques to provide compact, efficient and reliable power. Our Pure Sinewave output ensures compatibility with all AC appliances (Modified Sinewave/Square Wave inverters are not compatible with sensitive electronics, variable speed power tools, some chargers and motors). Connections are via heavy duty studs on the rear of the unit. AC output connects directly to the UK socket on the front panel. A digital display provides the user with battery and inverter status information. M-Power inverters interface with an optional remote panel. This provides inverter status information, remote on/off switch and an ignition inhibit circuit. If connected, the ignition inhibit circuit automatically switches the inverter off when the engine is turned off – perfect for service van use, where inverters being left inadvertandly on is a regular problem. PRODUCT HIGHLIGHTS 4 Pure Sinewave output. 4 extremely compact, efficient & reliable. 4 easy to install and use. 4 Built in display provides battery and inverter status. 4 Huge surge power ability for starting difficult loads. 4 optional remote on/off Panel. M-POWER 700W M-POWER 1400W M-POWER 2000W MERLIN PART NUMBER 01-8004 01-8005 01-8006 NoMINal INPut Voltage 12V dc 12V dc 12V dc INPut Voltage raNge 700W 1400W 2000W Surge caPacItY (PeaK) 1400W 2800W 4000W ac outPut FreQueNcY 50Hz +/- 0.5Hz 50Hz +/- 0.5Hz 50Hz +/- 0.5Hz ac outPut Voltage raNge 230 V ac +/- 10% 230 V ac +/- 10% 230 V ac +/- 10% outPut WaVeForM true SINe WaVe true SINe WaVe true SINe WaVe eFFIcIeNcY 90% 90% 90% No load curreNt draW <1000 ma <1000 ma <1000 ma loW BatterY alarM audIBle, 11V dc audIBle, 11V dc audIBle, 11V dc loW BatterY cutout 10.5V dc 10.5V dc 10.5V dc oPeratINg teMPerature raNge 0 c - 40 c 0 c - 40 c 0 c - 40 c ac recePtacle* uK - tHree PIN uK - tHree PIN uK - tHree PIN dIgItal dISPlaY (FroNt oF uNIt) V dc, ac outPut PoWer & error codeS V dc, ac outPut PoWer & error codeS V dc, ac outPut PoWer & error codeS dIMeNSIoNS (H x W x l) 90 x 185 x 310mm 115 x 240 x 369mm 115 x 240 x 418mm WeIgHt 2.7Kg 4.7Kg 5.5Kg reMote oN/oFF PaNel (25’ caBle) oPtIoNal oPtIoNal oPtIoNal StaNdardS ce, e-MarK, aBYc, ul ce, e-MarK, aBYc, ul ce, e-MarK, aBYc, ul 24V DC - 230V AC Inverters also available - please call our sales team for details * Euro sockets also available. M-Power Sine Wave DC/AC Inverters 4 Open Lead Acid 4 Sealed Lead Acid (Wet) 4 VRLA Gel 4 VRLA AGM 4 Carbon Fibre Optional Remote On / Off Panel complete with 25 ft cable. Plugs into inverter via a telephone type socket. (P/N 01-8021) M-Power is available in three power outputs: 700 watts – Computers, power tool chargers, audio/visual equipment, fridge/ freezer etc 1400 watts – Power tools, small toaster, small microwave, small water heater etc 2000 watts – Kettle, large microwave, small welder, pumps, small air conditioner and much more! The diagram below illustrates the difference between a modified sine wave and a pure sine wave AC supply (as seen through a scope). The modified output (although it follows a similar pattern) has sharp edges that protrude outside the normal shape of the smooth sine wave. This causes interference and compatibility issues with many appliances. Sine Wave .Vs. Modified Sine Wave MODIFIED SINE WAVE M-POWER PURE SINE WAVE

Upload: photosynergy

Post on 17-Dec-2015

33 views

Category:

Documents

3 download

Report

Download

Tags:

Embed Size (px):

DESCRIPTION

sine wave inverter detail, function m power sine wave dc - ac inverters

TRANSCRIPT

www.merl inequipment.com 19

M-Power Inverters simply and silently convert 12V DC battery power to 230V AC electricity. Ideal for

operating mains powered devices on board

boats and vehicles.

Merlin Equipment was the first in the

UK to introduce high frequency inverters to

the UK twenty years ago. This experience

translates into a highly efficient and reliable

range today.

M-Power employs state of the art

switch-mode power conversion techniques

to provide compact, efficient and

reliable power. Our Pure Sinewave

output ensures compatibility

with all AC appliances (Modified

Sinewave/Square Wave inverters

are not compatible with sensitive

electronics, variable speed power

tools, some chargers and motors).

Connections are via heavy duty

studs on the rear of the unit. AC

output connects directly to the UK

socket on the front panel. A digital

display provides the user with battery and

inverter status information.

M-Power inverters interface with an

optional remote panel. This provides inverter

status information, remote on/off switch and

an ignition inhibit circuit. If connected, the

ignition inhibit circuit automatically switches

the inverter off when the engine is turned off

perfect for service van use, where inverters

being left inadvertandly on is a regular

problem.

PRODUCT HIGHLIGHTS4 Pure Sinewave output.

4 extremely compact, efficient & reliable.

4 easy to install and use.

4 Built in display provides battery and inverter status.

4 Huge surge power ability for starting difficult loads.

4 optional remote on/off Panel.

M-POWER 700W M-POWER 1400W M-POWER 2000W

MERLIN PART NUMBER 01-8004 01-8005 01-8006

NoMINal INPut Voltage 12V dc 12V dc 12V dc

INPut Voltage raNge 700W 1400W 2000W

Surge caPacItY (PeaK) 1400W 2800W 4000W

ac outPut FreQueNcY 50Hz +/- 0.5Hz 50Hz +/- 0.5Hz 50Hz +/- 0.5Hz

ac outPut Voltage raNge 230 V ac +/- 10% 230 V ac +/- 10% 230 V ac +/- 10%

outPut WaVeForM true SINe WaVe true SINe WaVe true SINe WaVe

eFFIcIeNcY 90% 90% 90%

No load curreNt draW