maag , klingelnberg , hofler , david brown , osaka , harbin gear tester , gear measuring machine
TRANSCRIPT
Prime Technologieswww.Gear-Testers.com [email protected] Value
Maximum Gear Diameter 600 mm
Minimum Gear Diameter 35 mm
Module Range 0.5 – 20mm
Between Center Distance Maximum 600 mm
Between Center Distance Minimum 100 mm
Maximum Lead Inspection at 0 Degree 50 mm
Maximum Helix Angle can be possible to 50 Degree
Check
Vertical Travel of Probe Slide 100 mm
Work Load Maximum 150 Kg.
Optical Scale List Count 2”
Machine Power Required
Single Phase 220v
Machine Gross Weight 2000 Kg
FEATURES:•Fully reconditioned & all defective mechanical parts reworked or replaced.•Assured supply of complete spares & services for at least 10 years. •Experienced & Skilled Service Team for Service & Calibration. •Machine will be proved with CNC machine calibrated master within +/- 2 micron. •One year warranty for complete machine. Upgraded more than 300 machines all over India. •Gear Analysis software is Pentium IV & windows XP OS compatible. ACCESSORIES:•Lower Center ∅ 30.000mm -01 Qty. •Job Holding Carrier for 30.00mm center- 01Qty. •HSS Stylus for lead & profile measurement ∅ 1.0mm , ∅2.0mm & ∅3.0MM – Each 01 Qty.
MAAG SP 60 GEAR TESTER
Prime Technologieswww.Gear-Testers.com [email protected]
FEATURES:•Fully reconditioned & all defective mechanical parts reworked or replaced.•Assured supply of complete spares & services for at least 10 years. •Experienced & Skilled Service Team for Service & Calibration. •Machine will be proved with CNC machine calibrated master within +/- 2 micron. •One year warranty for complete machine. Upgraded more than 300 machines all over India. •Gear Analysis software is Pentium IV & windows XP OS compatible. ACCESSORIES:•Lower Center ∅ 30.000mm -01 Qty. •Job Holding Carrier for 30.00mm center- 01Qty. •HSS Stylus for lead & profile measurement ∅ 1.0mm , ∅2.0mm & ∅3.0MM – Each 01 Qty.
PARAMETER VALUE
Maximum Gear Diameter 300 mm
Minimum Gear Diameter 15 mm
Module Range0.5 – 15mm
Between Center Distance Maximum 400 mmBetween Center Distance Minimum 30 mm
Maximum Lead Inspection at 0° 150 mm
Maximum Helix Angle can be possible 40°
to Check
Vertical Travel of Probe slide 150 mm
Work Load Maximum 100 Kg.
Optical Scale list count 2”
Machine Power RequireSingle Phase
220V
Machine Net Weight 600 Kg.
Machine Gross Weight 850 Kg.
DAVID BROWN 18 T GEAR TESTER
Prime Technologieswww.Gear-Testers.com [email protected]
FEATURES:•Fully reconditioned & all defective mechanical parts reworked or replaced.•Assured supply of complete spares & services for at least 10 years. •Experienced & Skilled Service Team for Service & Calibration. •Machine will be proved with CNC machine calibrated master within +/- 2 micron. •One year warranty for complete machine. Upgraded more than 300 machines all over India. •Gear Analysis software is Pentium IV & windows XP OS compatible. ACCESSORIES:•Lower Center ∅ 30.000mm -01 Qty. •Job Holding Carrier for 30.00mm center- 01Qty. •HSS Stylus for lead & profile measurement ∅ 1.0mm , ∅2.0mm & ∅3.0MM – Each 01 Qty.
GLEASON IL 600 GEAR TESTERPARAMETER VALUE
Maximum Gear Diameter 600 mm
Minimum Gear Diameter 20 mm
Module Range0.5 – 15mm
Between Center Distance Maximum 850 mmBetween Center Distance Minimum 30 mm
Maximum Lead Inspection at 0° 160 mm
Maximum Helix Angle can be possible 45°
to Check
Vertical Travel of Probe slide 150 mm
Work Load Maximum 200 Kg.
Optical Scale list count 2”
Machine Power RequireSingle Phase
220V
Machine Net Weight 1500 Kg.
Machine Gross Weight 2000 Kg.
Prime Technologieswww.Gear-Testers.com [email protected]
FEATURES:•Fully reconditioned & all defective mechanical parts reworked or replaced.•Assured supply of complete spares & services for at least 10 years. •Experienced & Skilled Service Team for Service & Calibration. •Machine will be proved with CNC machine calibrated master within +/- 2 micron. •One year warranty for complete machine. Upgraded more than 300 machines all over India. •Gear Analysis software is Pentium IV & windows XP OS compatible. ACCESSORIES:•Lower Center ∅ 30.000mm -01 Qty. •Job Holding Carrier for 30.00mm center- 01Qty. •HSS Stylus for lead & profile measurement ∅ 1.0mm , ∅2.0mm & ∅3.0MM – Each 01 Qty.
HARBIN GEAR TESTERPARAMETER VALUE
Maximum Gear Diameter 390 mm
Minimum Gear Diameter 15 mm
Module Range0.5 – 15mm
Between Center Distance Maximum 550 mm
Between Center Distance Minimum 20 mm
Maximum Lead Inspection at 0° 80 mm
Maximum Helix Angle can be possible 45°
to CheckVertical Travel of Probe slide 80 mm
Work Load Maximum 100 Kg.
Optical Scale list count 2”
Machine Power RequireSingle Phase
220VMachine Net Weight 800 Kg.
Machine Gross Weight 1000 Kg.
Prime Technologieswww.Gear-Testers.com [email protected]
FEATURES:•Fully reconditioned & all defective mechanical parts reworked or replaced.•Assured supply of complete spares & services for at least 10 years. •Experienced & Skilled Service Team for Service & Calibration. •Machine will be proved with CNC machine calibrated master within +/- 2 micron. •One year warranty for complete machine. Upgraded more than 300 machines all over India. •Gear Analysis software is Pentium IV & windows XP OS compatible. ACCESSORIES:•Lower Center ∅ 30.000mm -01 Qty. •Job Holding Carrier for 30.00mm center- 01Qty. •HSS Stylus for lead & profile measurement ∅ 1.0mm , ∅2.0mm & ∅3.0MM – Each 01 Qty.
KLINGELBERG PFS 600 GEAR TESTERPARAMETER VALUE
Maximum Gear Diameter 600 mm
Minimum Gear Diameter 20 mm
Module Range0.5 – 15mm
Between Center Distance Maximum 700 mm
Between Center Distance Minimum 50 mm
Maximum Lead Inspection at 0° 150 mm
Maximum Helix Angle can be possible 60°
to Check
Work Load Maximum 200 Kg.
Optical Scale list count 2”
Machine Power RequireSingle Phase
220VMachine Net Weight 1200 Kg.
Machine Gross Weight 1500 Kg.
Prime Technologieswww.Gear-Testers.com [email protected]
FEATURES:•Fully reconditioned & all defective mechanical parts reworked or replaced.•Assured supply of complete spares & services for at least 10 years. •Experienced & Skilled Service Team for Service & Calibration. •Machine will be proved with CNC machine calibrated master within +/- 2 micron. •One year warranty for complete machine. Upgraded more than 300 machines all over India. •Gear Analysis software is Pentium IV & windows XP OS compatible. ACCESSORIES:•Lower Center ∅ 30.000mm -01 Qty. •Job Holding Carrier for 30.00mm center- 01Qty. •HSS Stylus for lead & profile measurement ∅ 1.0mm , ∅2.0mm & ∅3.0MM – Each 01 Qty.
KLINGELBERG PFSU 600 GEAR TESTER
Parameter Value
Maximum Gear Diameter 1200 mm
Minimum Gear Diameter 20 mm
Module Range 0.5 – 20 mm
Between Center Distance Maximum 1000 mm
Between Center Distance Minimum 30 mm
Maximum Face Width 240 mm
Maximum Helix Angle 85°
Vertical Travel of Probe slide 200 mm
Work Load Maximum 1500 Kg.
Optical Scale list count 2”
Machine Power RequireSingle Phase 220V
Machine Net Weight 2500 Kg.
Prime Technologieswww.Gear-Testers.com [email protected]
FEATURES:•Fully reconditioned & all defective mechanical parts reworked or replaced.•Assured supply of complete spares & services for at least 10 years. •Experienced & Skilled Service Team for Service & Calibration. •Machine will be proved with CNC machine calibrated master within +/- 2 micron. •One year warranty for complete machine. Upgraded more than 300 machines all over India. •Gear Analysis software is Pentium IV & windows XP OS compatible. ACCESSORIES:•Lower Center ∅ 30.000mm -01 Qty. •Job Holding Carrier for 30.00mm center- 01Qty. •HSS Stylus for lead & profile measurement ∅ 1.0mm , ∅2.0mm & ∅3.0MM – Each 01 Qty.
MAAG PH 40 GEAR TESTERPARAMETER VALUE
Maximum Gear Diameter 400 mm
Minimum Gear Diameter 20 mm
Module Range0.5 – 15mm
Between Center Distance Maximum 720 mm
Between Center Distance Minimum 10 mm
Maximum Lead Inspection at 0° 150 mm
Maximum Helix Angle can be possible 45°
to Check
Vertical Travel of Probe slide 150 mm
Work Load Maximum 100 Kg.
Optical Scale list count 2”
Machine Power RequireSingle Phase
220V
Machine Net Weight 800 Kg.
Machine Gross Weight 1000 Kg.
Prime Technologieswww.Gear-Testers.com [email protected]
FEATURES:•Fully reconditioned & all defective mechanical parts reworked or replaced.•Assured supply of complete spares & services for at least 10 years. •Experienced & Skilled Service Team for Service & Calibration. •Machine will be proved with CNC machine calibrated master within +/- 2 micron. •One year warranty for complete machine. Upgraded more than 300 machines all over India. •Gear Analysis software is Pentium IV & windows XP OS compatible. ACCESSORIES:•Lower Center ∅ 30.000mm -01 Qty. •Job Holding Carrier for 30.00mm center- 01Qty. •HSS Stylus for lead & profile measurement ∅ 1.0mm , ∅2.0mm & ∅3.0MM – Each 01 Qty.
MAAG PH 60 GEAR TESTERPARAMETER VALUE
Maximum Gear Diameter 320 mm
Minimum Gear Diameter 20 mm
Module Range0.5 – 15mm
Between Center Distance Maximum 600 mmBetween Center Distance Minimum 30 mm
Maximum Lead Inspection at 0° 150 mm
Maximum Helix Angle can be possible 45°
to Check
Vertical Travel of Probe slide 150 mm
Work Load Maximum 100 Kg.
Optical Scale list count 2”
Machine Power RequireSingle Phase
220V
Machine Net Weight 800 Kg.
Machine Gross Weight 1000 Kg.