maass midwest ecatalog 570 · 2020. 7. 31. · 6 | u.s. & canada 1-800-323-6259 | fax...
TRANSCRIPT
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 1
CHEC
K VA
LVES
CHECK VALVES531 CHECK VALVE | 1/2# cracking pressure | Patented
Features:• The mating pipe cannot block the valve from operating• Longer threads make for an excellent valve when used with PVC pipe• The Celcon guide compresses into the valve body preventing the valve from coming apart during operation• Celcon guide and poppet manufactured from same materials for longer wearability• Square hole in Celcon guide prevents grit retention, eliminates wear• Celcon bullet shaped poppet for smooth fl ow,excellent for VFD pumps• Tapered seat washes clean• Coined seat for smooth hardened surface• The seat I.D. is the same as the mating pipe I.D. - a full fl ow valve 40-60% greater fl ow than industry standard• For vertical use• All of these features are contained in a water works grade 81 Red Brass body• Excellent for hot water heat systems; rated at 180 degrees• Lead Free: ≤ .025% Lead Content
Part Number Size (Inches) Weight (lbs) Quantity/Carton List Price Each 922823 922824 922825 922826
1 1-1/4 1-1/2
2 • Female x Female In-line Check
0.8 1.3 1.6 2.8
25 25
IND. IND.
See separate price list
529 CHECK VALVE | 1/2# cracking pressure | Patented • Lead Free: ≤ .025% Lead Content
Part Number Size (Inches) Weight (lbs) Quantity/Carton List Price Each 922605 922606 922607 922608
1 x 1 1-1/4 x 1
1-1/4 x 1-1/42 X 2
0.8 0.9 1.2 2.6
25 25 25
IND.
See separate price list
529 XLT CHECK VALVE | Patented Features:• Designed for special Bell Socket PVC Drop Pipe • Lead Free: ≤ .025% Lead Content
• Male x Female In-line Check (pump head use)
Part Number Size (Inches) Weight (lbs) Quantity/Carton List Price Each 922700 922702 922704
1 1-1/4
2
1.0 1.5 3.3
25 25
IND.
See separate price list
530 CHECK VALVE | 1# cracking pressure Features• Heavy red brass body for maximum strength • Spool type brass poppet eliminates sticking • Buna-n rubber facing for water, oil or gas • Silent operation in horizontal or vertical position • Can be used with water, oil or gas • Lead Free: ≤ .025% Lead Content
• Male x Female
Part Number Size (Inches) Weight (lbs) Quantity/Carton List Price Each 922579 922582 922585 922588 922591 922594 922597 922600 922603
1/2 3/4 1
1-1/4 1-1/2
2 2-1/2
3 4
0.6 1.2 1.5 1.8 2.5 3.8 7.0 13.0 38.0
25 25 2525
IND.IND.IND.IND.IND.
See separate price list
• Female x Female In-line Check
Note: All brass foot and check valves rated at 200 psi at 180°F operating temperature.
531
529
529XLT
530
-
2 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
CHECK VALVES536-S TAPPED CHECK VALVE
Features: • One 1/8” hole for 645 air valve on inlet side• Lead Free: ≤ .025% Lead Content
Part Number Size (Inches) Weight (lbs) Quantity/Carton List Price Each 922655 922656 922657 922660
1 1-1/4 1-1/2
2
0.8 0.9 1.2 2.6
1.5 2.0 3.0 4.0
See separate price list
• Female x Female Check
CHECK VALVESDUCTILE IRON CHECK VALVES 538-S TAPPED CHECK VALVE
Features: • One 1/8” hole for 645 air valve on inlet side • One 1/4” hole for pressure switch on outlet side• Lead Free: ≤ .025% Lead Content
Part Number Size (Inches) Weight (lbs) List Price Each 922687 922690 922693 922694
1 1-1/4 1-1/2
2
1.5 2.0 3.0 4.0
See separate price list
• Female x Female Check
539-S TAPPED CHECK VALVE Features: • Two 1/4” holes - 90° apart on outlet side • Lead Free: ≤ .025% Lead Content
Part Number Size (Inches) Weight (lbs) List Price Each 922715 922716
1 1
1.5 2.0
See separate price list
• Female x Female Check
530 D CHECK VALVE Features: • Heavy Ductile Iron body for maximum strength• Lead free (≤ 0.25% lead content) • Spool type poppet eliminates sticking• Durable powder coat fi nish• Buna-N Rubber facing for water, oil, or gas • Stainless steel spring
Part Number Size (Inches) Weight (lbs) List Price Each 922630 922635922640
2-1/234
71338
See separate price list
• Female x Female Check
DUCTILE IRON CHECK VALVES
530 D CHECK VALVE with BREAK OFF PLUG Features:• Includes 1/2” stainless steel break off plug • When plug is broken, it allows water to drain from pipe.
Part Number Size (Inches) Weight (lbs) List Price Each 922620 4 38 See separate price list
536-S
538-S
539-S
530 Dwith
BREAK OFF PLUG
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 3
DUCT
ILE
IRON
CHE
CK V
ALVE
S
DUCTILE IRON CHECK VALVES600 SPRING LOADED CHECK VALVE
Features:• Ductile iron body• Stainless steel spring and nut • Lead free ( 0.25% lead content)• Powder coated fi nish• Silicone bronze poppet
Part Number Size (Inches) Weight (lbs) List Price Each 922795 922796
68
40.0 54.5
See separate price list
600 SPRING LOADED CHECK VALVE WITH BREAK OFF PLUG Features:• Include 1/2” stainless steel break off plug
Part Number Size (Inches) Weight (lbs) List Price Each 922797 922798
68
40.5 55.5
See separate price list
BREAK OFF PLUG ONLYFeatures:• Includes 1/2” stainless steel as standard
Part Number Size (Inches) Weight (lbs) List Price Each 922561 1/2 0.50 See separate price list
630 SPRING LOADED CHECK VALVE Features:• Designed for VFD systems• Stainless steel spring and nut • Ductile Iron body• Stabilizer sleeve increases contact area • Lead free ( 0.25% lead content)• 600 PSI working pressure
Part Number Size (Inches) Weight (lbs) List Price Each 922800 922801 922802 922803
3456
11.721.544.460.2
See separate price list
600
Break OffPlug Only
630
• Female x Female Inline Check
• Female x Male
• Female x Female Inline Check
-
4 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
FOOT VALVES
FOOT VALVES
534 FOOT VALVE Features:• Heavy red brass body• Brass spool type poppet• Brass screen strainer• Rubber facing for water, oil and gas • Lead free ( 0.25% lead content)
Part Number Size (Inches) Size of Pipe Valve Weight (lbs) List Price Each Valve Fits Inside
922747 922750
11
1-1/22
0.81.0
See separate price list
634 FOOT VALVE Features:• Heavy red brass body• Brass O-ring type poppet • Stainless steel screen strainer• Lead free ( 0.25% lead content)
Part Number Size (Inches) Weight (lbs) List Price Each 922776 922777 922778 922779 922780 922782 922789 922790
3/4 1
1-1/4 1-1/2
2 3 4 6
0.53 0.74 1.26 1.50 2.72 9.00 16.50 35.00
See separate price list
540 FOOT VALVE Features:• Cast iron body and strainer• Leather fl apper check • Open area of strainer exceeds pipe area• Tapped IPS • Use for irrigation or drainage or effl uent
Part Number Size (Inches) Weight (lbs) Quantity/Carton List Price Each 931671 931673931674 931676
2346
PTDPTDPTDPTD
5.510.819.547.0
See separate price list
500 FOOT VALVE (Strainer Only) Features:• Reduces inventory - can be used on any female tapped check valve • Strainer made of plastic
Part Number Size (Inches) Weight (lbs) List Price Each 542750 542755
1 1-1/4
0.10.1
See separate price list
FV4-1 FOOT VALVE Features:• Manufactured from Delrin™
Part Number Size (Inches) Weight (lbs) List Price Each 922860 FV4-1 Fits 3/4” to 1 1/2” pipe size See separate price list
534
634
540
500
FV4-1
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 5
PUMP
STO
P VA
LVES
CYCLE SLAYER PUMP STOP VALVESFeatures:• Controls pump cycling, reducing amount of electricity used by the pump• Eliminates early pump failure and reduces pump cycling, increasing the life of pumps• Reduces the size of pressure tank necessary• Adjustable bypass valves easily control run-time• Prevents and controls water hammer
PLASTIC FIXED PRESSURE SERIESFeatures:• 1” valve can be used in 4” or larger well• Preset to 50 psi• 1/4” valve can be used in 5” or larger well• Tank fi ll rate 2.95 gpm• Lead free (≤ 0.025% lead content)• Thermoplastic construction
Friction Loss Data, Plastic Models: Flow Rates - GPM/Gallons per Minute Part Number Model Size Preset 5 10 15 20 30 40 50 60 85 100 List Price Ea.
See separate price list
935822-40935822-50935822-60 935824-40935824-50
PS-100PPS-100PPS-100P PS-125PPS-125P
2.60 1.82 2.35 5.40
3.04 2.66 2.33 2.97 4.14 5.62
1” 1”1”
1-1/4” 1-1/4”
IN-WELL COUPLING ADAPTOR Part Number Model Size Description List Price Each
935826 935828
PS-WC PS-WC
1” 1-1/4”
See separate price list
Well Couping Adapter Well Couping Adapter
BRASS SERIESFeatures:• Bronze or stainless steel body• Double union inlet and outlet construction• Thermoplastic seat • By-pass feature controls expansion pressure• Sealed spring cage for accessible outdoor instrallations• Lead free ( 0.25% lead content) • Metal cage
Friction Loss Data, Plastic Models: Flow Rates - GPM/Gallons per Minute Part No. Model Size/Description 5 10 15 20 30 40 50 60 85 100 List Price Ea.
See separate price list
935812 935814 935834 935836 935838
PS100B-1 PS125B-1-1/4
PS100B-1 PS125B-1-1/4
PS200B-2
7.5 13 22 6 7.5 9 11 13 16 21
1”/Adj. 25-75 PSI 1-1/4”/ Adj. 25-75 PSI
Adj. 20-90 PSI Adj. 20-90 PSI Adj. 20-90 PSI
STAINLESS SERIES Features:• Stainless steel cage• Lead free ( 0.025% lead content)
Part Number Model Type List Price Each 935832 PS-100SS-1 1” / Adj. 20-90 PSI See separate price list
CAST IRON SERIESFeatures:• Adjustable by-pass• Bronze body construction• Field serviced without removal of valve• Liquid-fi lled stainless steel gauge• Adjustable 25-85 PSI• Stainless steel control lines• Lead free ( 0.025% lead content)
Friction Loss Data, Plastic Models: Flow Rates - GPM/Gallons per Minute Part No. Model Size Type 30 40 60 80 100 200 400 600 800 1000 List Price Ea.
See separate price list
935802 935804 935806
PS-200 CI PS-300 CI PS-400 CI
.2 .33 .7 1.22 2.0 8.0 1.22 .2 .3 1.2 5.0 12.0 18.0 4.0 4.0 8.0 15.0 24.0
2” 3” 4”
Globe Globe Globe
40 PSI50 PSI60 PSI40 PSI50 PSI
-
6 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
PartNumber Model
DischargePipe
(Inches)
Supply Pipe
(Inches)
Casing Size(Inches)I.D./O.D.
Hole SizeRequired(Inches)
Shipping Weight(lbs-oz.)
WorkingLoad(lbs.)
Quantity/Carton
TM PITLESS ADAPTERS
DICKENS PITLESS ADAPTERS
Features: • Precision machined all red brass castings with neoprene O-ring • Large inner and outer rubber gaskets to seal out surface water contamination • All Dicken pitless adapters are pressure tested to 150 psi • Chamfered slide for fast and easy installation • Wrench grip on ell speeds installation • A built in lowering eyelet for easier installation • Water System Council - PAS-97 (2012) listed • Lead Free: ≤ .025% Lead Content
PartNumber Model
DischargePipe
(Inches)
Supply Pipe
(Inches)
Casing Size(Inches)
I.D.
Hole SizeRequired(Inches)
Shipping Weight(lbs-oz.)
WorkingLoad(lbs.)
Quantity//Carton
952156952158
JR-S-10*JR-S-10-P
11
11
4-1/2 to 124-1/2 to 12
1 5/81 5/8
2 lbs. 5 oz.2 lbs. 5 oz.
15001500
1212
952110952160952112952162
LD-S-10*LD-S-10-P
LD-S-12
11
1-1/4
11
1-1/4
5 to 125 to 125 to 125 to 12
1-3/41-3/42-1/42 -1/4
4 lbs. 2 oz.4 lbs. 3 oz.5 lbs. 8 oz.5 lbs. 9 oz.
2000200020002000
121288
952010952012952015952016952020
S-10S-12S-15
S-15PS-20
11-1/41-1/21-1/2
2
11-1/41-1/21-1/2
2
5 to 125 to 12
5-3/16 to 125-3/16 to 125-5/8 to 12
1-3/42-1/42-5/82-5/83-1/8
5 lbs.13 oz.8 lbs. 2 oz.
10 lbs.12 oz.10 lbs.12 oz.14 lbs. 4 oz
50005000500050005000
86664
952150 LD-2-X upper
LD-2-X lower
1-1/41
1-1/41 4-1/2 to 12
2-1/41-3/4 11 lbs. 9 oz. 2000 6
• Pressurized model available for counties and states where required. • JR-S-10 may be used on 4” casing with 3” pump. • NOTE: Part Number 952015 Model S-15 not designed for STR17 5” PVC casing.
CLEARWAY PITLESS ADAPTER | Patented Features:• Simple slip fi t insert • Easy installation by cutting 2 3/4” hole and clamping on • Clamp on units for no obstruction in well casing ID • Lead Free: ≤ .025% Lead Content
952040 CW-4-10 1 1 4 4-1/2 2-3/4 5 lbs. 1 oz. 2000 6952050 CW-5-10 1 1 4-1/25
55-9/16 2-3/4 5 lbs. 0 oz. 2000 6
952060 CW-6-10 1 1 5-5/8 6 2-3/4 5 lbs. 14 oz. 2000 6952045 952047 952055 952065 952066 952067 952058
CW-4-10-WACW-4.5-10-WACW-5-10-WACW-4-12-WA
CW-4.5-12-WACW-5-12-WACW-6-12-WA
111
1-1/41-1/41-1/41-1/4
111
1-1/41-1/41-1/41-1/4
44-1/2
54
4-1/256
4-1/25
5-9/164-1/2
55-9/166-5/8
2-3/42-3/42-3/42-3/42-3/42-3/42-3/4
6 lbs. 0 oz.6 lbs. 8 oz.6 lbs. 8 oz.6 lbs. 5 oz.6 lbs. 12 oz.6 lbs. 5 oz.6 lbs. 15 oz.
2000200020002000200020002000
6666666
PartNumber Model
DischargePipe
(Inches)
Supply Pipe
(Inches)
Casing Size(Inches)I.D./O.D.
Hole SizeRequired(Inches)
Shipping Weight(lbs-oz.)
WorkingLoad(lbs.)
Quantity//Carton
Features:• Pressurized for use in Michigan, Illinois • Designed for 4” or 5” well casing• Fits Schedule 40 through SDR21• Unit comes complete with WTTC Michigan/Illinois Approved cap as described on Page 16• Lead Free: ≤ .025% Lead Content
952040952076 952077
CW-4-12-WA-25PCW-5-12-WA-25PCW-6-12-WA-25P
1-1/41-1/41-1/4
1-1/41-1/41-1/4
456
4-1/25-9/166-5/8
2-3/42-3/42-3/4
6 lbs. 5 oz.6 lbs. 5 oz.6 lbs. 15 oz.
200020002000
686
Features:• Pressurized with WTCC cap
PartNumber Model
DischargePipe
(Inches)
Supply Pipe
(Inches)
Casing Size(Inches)I.D./O.D.
Hole SizeRequired(Inches)
Shipping Weight(lbs-oz.)
WorkingLoad(lbs.)
Qty/Carton
952043952053
CW-4-10-WA-25P W/4 WTCC CAPCW-4510-WA-25P W/5 WTCC CAP
11
11
45
4-1/25-9/16
7.39.8
7.39.8
20002000
11
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 7
MAAS
S PI
TLES
S AD
APTE
RS
MAASSTM PITLESS ADAPTERSMAASS MODEL J SERIES OF PITLESS ADAPTER AND UNITS ALL FEATURE:
• Water contacts only 304 stainless steel and brass, eliminates rust, corrosion, and electrolysis in the adapter• Durable cast steel housing• Tapered 8° slip fi tting for easy installation and removal of brass insert• No obstruction left in well casing when brass insert is pulled• Designed for shallow or deep settings and high working pressures• Water System Council - PAS-97 (2012) listed• Lead Free: ≤ .025% Lead Content
MAASS MODEL J WELD-ON PITLESS ADAPTER | PatentedFeatures:• Permanently installed by welding for increased strength and durability• J Series of adapters and units available with stainless steel, nickel-bronze inserts, stainless steel housings, and viton or tefl on O-rings• Only two one inch outlet size Model J Pitless needed to fi t all well casing sizes
PartNumber Model
DischargePipe
(Inches)
Drop Pipe
(Inches)I.D. Casing Size
(Inches)Weight(Lbs.)
WorkingLoad(lbs.)
List PriceEach
928100928105928110928115928120928125928130928135928140928145928150
4J14J1 1/44J1 1/2
5J26J1
6J1 1/46J1 1/2
6J26J2 1/2
8J310J4
11-1/41-1/2
21
1-1/41-1/2
22-1/2
34
11-1/41-1/2
21
1-1/41-1/2
22-1/2
34
4-54-54-55
6-7-8+6-7-8+6-7-8+6-7-8+6-7-8+
8-10-12+10-12-14+
6.07.08.512.06.07.08.512.018.032.050.0
400050005000600040005000500060008000
1000015000
See separate
pricelist
MAASS MODEL JJ WELD-ON PITLESS ADAPTER FOR SUCTION PUMPS | PatentedFeatures:• Lateral (2”) can be pressurized to meet state codes• Wisconsin and Michigan State approved
PartNumber Model
DischargePipe
(Inches)
Drop Pipe
(Inches)I.D. Casing Size
(Inches)Weight(Lbs.)
WorkingLoad(lbs.)
List PriceEach
928200928205928210928215
4JJ16JJ1
4JJ1 1/46JJ1 1/4
11
1-1/41-1/4
2222
4-56-7-84-5
6-7-8
13.013.014.014.0
4000400050005000
See separate
pricelist
MAASS MODEL JC CLAMP-ON PITLESS ADAPTER | PatentedFeatrues:• 304 stainless steel clamps and nuts• Cast steel lips support adapter housing on wall of well casing; no lock needed• Ideal for use on either plastic or steel well casing• Buna N rubber gasket seals cast steel housing against O.D. of well casing at point of attachment• Model JC available with stainless steel inserts and viton or tefl on O-rings• Lead Free: ≤ .025% Lead Content
PartNumber Model
DischargePipe
(Inches)
Drop Pipe
(Inches)O.D. Casing Size
(Inches)Weight(Lbs.)
WorkingLoad(lbs.)
List PriceEach
928300928305928310928315928320928325928330928335928340928345928350928355
4JC150DJC1
5JC160DJC1
6JC17JC1
4JC1 1/450DJC1 1/4
5JC1 1/460DJC1 1/4
6JC1 1/47JC1 1/4
111111
1-1/41-1/41-1/41-1/41-1/41-1/4
111111
1-1/41-1/41-1/41-1/41-1/41-1/4
4-1/25
5-9/166
6-5/87
4-1/25
5-9/166
6-5/87
11.011.011.0
11.7511.7512.011.7511.211.2
12.7512.7513.0
400040004000400040004000400040004000400040004000
See separate
pricelist
• NOTE: May be installed with 4 1/2” hand grinder and cutting wheel or cutting torch
-
8 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
MAASSTM PITLESS UNITS
MAASS PITLESS UNITS
MODEL JX1 - PITLESS BURY UNITS | Patented
Features:• Maass pitless units constructed of schedule 40 steel pipe• Maass pitless units are Wisconsin, New York, Illinois and Michigan approved• JX1 Unit meets Great Lakes and Upper Mississippi River Board of State
Public Health and Environmental Managers Standards.• JX1 Units can come threaded or plain end for welding• Specify bury depth when ordering JX1 Pitless Units• PA Option and PSP Package available on 1” discharge models for pressure switch in the
well in 5” or larger casing• JX1 units have standard male threads for attachment at base• Lead Free: ≤ .025% Lead Content
• NOTE: Other sizes and combinations of JXI Pitless Units are available.• JX1 units allow 12” above grade stick-up beyond bury depth -
check local codes.
PartNumber Model Number/Model Well Casing Size
Water Outlet & Drop Pipe Size List Price
928500928505928510928515928520928525928530928535928540928545928550928555928560928565928570928575928580928585928590928595928600928605
4JX1-14JX1-1 1/44JX1-1 1/2
5JX1-15JX1-1 1/45JX1-1 1/2
5JX1 - 26JX1-1
6JX1-1 1/46JX1-1 1/2
6JX1-26JX1-21/2
8JX1-18JX1-1 1/48JX1-1 1/2
8JX1-28JX1-2 1/2
8JX1-310JX1-2
10JX1-2 1/210JX1-310JX1-4
44455556666688888810101010
11-1/41-1/2
11-1/41-1/2
21
1-1/41-1/2
22-1/2
11-1/41-1/2
22-1/2
32
2-1/234
See separatepricelist
Part Number Size Height (H) Standard Weight List Price003325003326
8” x 6”10” x 8”
6”7”
13 1/4 lbs.22 lbs.
See separateprice list
CONCENTRIC REDUCERSFeature: • Fittings conform physically and chemically to ASTM Specifi cation A106
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 9
MAAS
S MO
DEL
MB
PI
TLES
S AD
APTE
R
MAASSTM MODEL MB PITLESS UNITFeatures:• Designed for ease and convenience in setting and pulling pumps• For 8, 10, 12, 14, 16, 18, 20, 22, 24 inch and larger wells• Available with 2” through 14” discharge and spool pipe• Standard features include stainless steel inserts used at critical “O” Ring Seal and Spool Seat Surfaces• Vertical turbine and booster pump station units and fl ow meters available• All MB Units coated inside and outside with FDA & NSF approved 2 part catalytic epoxy meeting AWWA C-210 standard• Meets Great Lakes and Upper Mississippi River Board of State Public Health and Evnironmental Managers standards• Available with all wetted parts made of stainless steel• Lead Free: ≤ .025% Lead Content
Two large size access holes for wire, airline, controls, chlorination, etc.
Spool has large water passages and is of heavy duty construction 2” through 14”
Rounded corner helps to prevent scraping wires
Upper casing barrel, supplied by factory or
by installer.
Stainless steel screened well vent
Neoprene cap gasket
Electrical junction box is out of the way and protects wire during pump work
Water tight, heavy duty steel cap
Patented
Locking bolts available to secure steel cap, and prevent well tampering
Weld-on connection to well casing; threaded and
compression fi ttings are available 8” through 26”
Stainless steel rings insure a positive long life seal for “O rings”
Weld-on discharge; fl anged, threaded, and slip on ends are
available 2” through 14”
Heavy wall housing
Four centering blocks help to prevent “O ring” damage
-
10 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
MAASSTM MODEL MB PITLESS UNIT
MAASS MODEL MB PITLESS ADAPTER
MB
Heavy Duty = (HD), Extra Heavy Duty = (XHD) with APIR Threads
Submersible = (S), Booster Station = (B), Turbine = (T)
Casing Diameter = (8” - 36”)
Upper Barrel Diameter (10” - 38”)
Discharge Diameter (2” - 14”)
Discharge Type Male Thread = (MT), Female Thread = (FT), Plain End = (P), Flanged = (F)
Pump Pipe (2” - 14”)
National PipeThread = (NPT), APIR Round = (APIR)
Well Cap - Watertight = (WT), Aluminum = (AL), Watertight Aluminum = (AWT)
Bury Depth (if upper casing is ordered)
Custom Features (Please describe) (See Options)
MODEL NUMBER ORDERING GUIDE
OPT
IONS
CAP
SPO
OL
HOUS
ING
MO
DEL
MODEL WELL CASINGHeavy Duty
(HD) 8” 10” 12” 14” 16” 18” or larger
Pump Column Discharge Pipe
Standard 4” 6” 6” 6” 6” 6”
Optional 2”, 3”, 4” 4”, 5” 4”, 5” 4”, 5”, 8” 5”, 8”, 10” 5”, 8”, 10”, 12”
A - Steel watertight cap shown for Heavy Duty Units. Cast Aluminum watertight or submersible cap available. B - Airline Test Block - Optional. C - 304 Stainless Steel rings and seat standard. D - O-Rings - 3/8” cross section. E - Male NPT threads on spool pipe, API threads or Flanges optional. F - Heavy Duty Units have 1/2” or thicker housing wall. G - Large access channels, Stainless Steel tubes for seal wire connections or fl owing
well available. H - Spool discharge openings 100% or greater than spool pipe used. I - Spool Pipe XS wall. J - Upper casing barrel 3/8” thick.
OPTIONS: CD = Chlorinator Discharge FM = Flow Meter SWC = Sealed Wire Connections BPS = Booster Pump Stations ATB = Airline Test Blocks CVS = Check Valve in Spool LB = Locking Bolts TA = Torque Arrestor and Lift-Out Bail HDR = Hold Down Ring RT = Restraining Tabs Other options, please describe
Complete systemes include Maass Midwest Control PanelOPTIONS: Chlorinator discharge; Flow Meters; Airline Test Blocks; Turbine Pump mountings and seals; Sealed wire connections in spool for Flowing
Wells and Booster Pump Stations; Check valve in spool; Locking bolts for well cap; Torque Arrestor & Lift-out bail. *ALL STAINLESS STEEL AND ALL WETTED PARTS ADAPTERS AVAILABLE UPON REQUEST.
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 11
1
65
5
6
4
7
3
2
MAAS
S SE
LECT
ION
GUID
EVF
D BO
OSTE
R &
PUMP
PAN
ELS
MAASS MIDWEST SELECTION GUIDEENGINEER QUESTIONS | ANSWER PAGE
Total Dynamic Head: Phase:
Required Flow Rate: Voltage:
Inlet Suction Pressure (PSI): FLA:
Desired Discharge Pressure (PSI): SFA:Inlet Suction Pipe Diameter (Booster
Only):Choose a NEMA Rating:NEMA 3R Outdoor Enclosure NEMA 1 Outdoor Enclosure Discharge Pipe Diameter:
System Information
TYPICAL APPLICATIONSMaass Midwest Well/Storage Tank/Simplex & Duplex Constant Pressure
Maass Midwest Booster/Rural Water/Water Pressurization Systems
1. Simplex/Duplex VFD Panel - Constant Pressure2. Well Pump Panel (Optional)3. Well Pump4. Storage Tank5. Booster Pumps6. Schneider Pressure Transducers -
Suction & Discharge7. Unimax Float Switches - Level Controls (Optional)
MW
1
2
2
21. Simplex VFD Panel2. Booster Pump3. Schneider Pressure Transducers - Suction & Discharge
Schneider Pressure Transducers0-100 PSI0-150 PSIOther confi gurations available.
VFD BOOSTER AND SUBMERSIBLE PUMP PANELSStandard controls from 3HP - 250HPCustom Controls above 250 HP - consult factoryy
SIMPLEX DUPLEXCUSTOM
-
12 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
PITLESS ADAPTER “O” RINGS
PROTECTIVE WELL ENCLOSURE
PITLESS “O” RING ADAPTERS
TM SERIESPART NO. SIZE LIST PRICE017304 017304 017315 017300 017315 017344 017325 017300 018315 018315 018315 018315 018315 018315
JR-S10LDS-10LDS-12
S-10S-12S-15S-20
LD-2X UPPER/LDX2 LOWERCW-4-10CW-5-10CW-6-10
CW-4-10WA CW-4.5-10WA CW-5-10WA
See separate price list
MAASS J-JX-JC SERIESPART NO. SIZE LIST PRICE001030 001030 001032 001032 001034 001036 001038 001040 990000
J1JC 1-1/4J1-1/4J1-1/2
J2J2-1/2
J3J4
Model J O-Ring Repair Kit
See separate price list
NOTE: Model J O-Ring Repair Kit contains: 12 pcs. J1 O-Rings,6 pcs. J11/4 / J11/2 O-Rings and 3 pcs. J2 O-Rings.
MAASS MODEL MB UNITSPART NO. SIZE LIST PRICE001008001010001012001014001016001018001020001022001024
8” MB HD10” MB HD12” MB HD14” MB HD16” MB HD18” MB HD20” MB HD22” MB HD24” MB HD
See separate price list
VITON “O” RINGSPART NO. SIZE LIST PRICE017350017352017355017360001060001062001064001066001070
LDS-10S-10S-12S-20J1
J1-1/4J2
J2-1/2J-4
See separate price list
NOTE: MB spool requires two “O” rings
MAASS PROTECTIVE WELL ENCLOSURE
PART NO. SIZE LIST PRICE972630972635972640972645
24” X 30”30” X 30”36” X 30”42” X 32”
See separate price list
Features:• For Maass JX1 and Model MB Pitless Units• Welded air vent with stainless steel screen• Stainless steel lock pins• Shielded Locks• Two lifting eyes on lid• Detent pins for quick release of unit• Specify base options: Cemented or Anchor bolt secured mounting base• Catalytic epoxy coated• Fits all sizes up to 26” well casing
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 13
MAAS
S SE
WAG
E AD
APTE
RS
MAASS SEWAGE ADAPTERSMAASS SEWAGE ADAPTERS (JS)Features:
• Allows for easy service to any submersible pump installation• Brass and 304 stainless material with Viton o-ring seal used to combat corrosion• Not necessary to pump tank to service pump• Rail system can be fabricated by installer or Maass• Large 8° taper slide for ease of installation or removal• Can be used in cisterns and curb wells
PartNumber
ModelNumber
NPTSize
Dimensions (Inches) Weight(Lbs.)
List PriceA B C D
928800 928805 928810 928815 928820
JS 1 1/4JS 1 1/2
JS 2JS 3JS 4
1-1/41-1/2
234
44-/45-1/27-1/27-3/4
66710 12
5-1/8 5-1/4 6-7/8 9-1/2
10-1/2
2-1/8 2-1/8 2-3/4 3-1/2 4-1/8
4000400050005000
See separate
pricelist
Part Number For Models Angle Size List Price928900928905
JS1 1/4, 1 1/2, 2JS3, 4
1/4 x 1 x 11/4 x 1-1/2 x 1-1/2
See separateprice list
MAASS SEWAGE ADAPTER SLIDE RAIL SYSTEMFeature: • Rails used to hold adapter in position as well as providing guide system for brass insert• Rails provided are welded in place on J.S. adapter
Part Number Model Number NPT size List Price
928989 JSB-2 2 See separateprice list
MAASS SEWAGE ADAPTERS (JSB)Feature: • Large 8° Taper Slide for ease of installation or removal• 2” NPT inlet and outlet• 1” pipe used for guides and support• 100% brass construction with Viton o-ring seal for corrosion resistance• Allows for easy service to any submersible pump installation• Not necessary to pump tank to service pump
Part Number Model Number NPT size List Price
928985 JSB-2 2” See separateprice list
JSB-2 STAND OFF BRACKETFeature: • 304 SS construction• Easily installed beneath septic tank lid or off the wall• Utilizes (2) 1/2” bolts for pipe guide system (not provided)
NOTE: Please specifi y slide rail length when ordering
-
14 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
SEWAGE ADAPTER ACCESSORIES
SEWW
AGE ADAPTER ACCESSORIES
Part Number For Model Mounting Holes List Price
928995 JSB-2 9/16” See separateprice list
JSB-2 UNIVERSAL STAND OFF BRACKETFeatures:• 19” overall length allows adjustment every 4 1/2 inches for 1” guide pipe• Durable two part epoxy coating• Utilizes (2) 1/2” bolts for installation to tank wall (not provided)
™ SUMP/SEWAGE ADAPTERSFeatures:• Precision machined all red brass castings• Chamfered slide for fast and easy installation• Red brass ell and slide with Viton o-ring seal
PartNumber Model
DischargePipe
(Inches)
SupplyPipe
(Inches)
Casing Size Nominal(Inches)
Hole Size, Required(Inches)
Shipping Weight
(Lbs.-oz)
Working Load(Lbs.)
Qty./Carton
List PriceEach
952178952180952182
LD-S-10-COLD-S-12-CO
S 20-CO
11-1/4
2
11-1/4
2
5-125-12
5-5/8-12
1-3/42-1/43-1/8
4.05.0
14.0
2,0002,0005,000
10124
See separate
pricelist
ABS SUMP/SEWAGE CHECK VALVEFeatures:`• Full fl ow design• Two piece ABS body (sonic welded)• Buna-N fl apper seal provides positive sealing• Valves provided with (4) stainless steel clamps• DRS model provided with two rubber reducer sleeves
PartNumber Model No. Description
List PriceEach
940155940150
BSC-200-SBBSC-125/150 DRS
2” IPS1-1/4 or 1-1/2 IPS
See separateprice list
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 15
PITL
ESS
ADAP
TER
ACCE
SSOR
IES
PITLESS ADAPTER ACCESSORIES
Part Number Model Number List Price
928010 CG See separateprice list
TORCH CUTTING GUIDE:For ease of installation of Model J or JC Pitless Adapter. Please specify casing O.D. and discharge size when ordering
Part Number Model Number List Price928000928002928003928004953060953055
5J1 PA6J1 PA
5JC1 PA6JC1 PA
CW-6-10-PACW-5-10-WA-PA
See separateprice list
PITLESS ACCESSORY OPTION AND PRESSURE SWITCH PACKAGEFeatures:• Allows pressure relief valve or pressure switch to be mounted in the well• System drain valve may be located in the well; check local codes• PA option is 1/2” tapping on back of 1” brass insert• Use with pressure tranducers
• NOTE: Used on 1” discharge adapters in 5” casing or larger.
Part Number Model Number List Price
928005 PSP See separateprice list
• PSP package includes 1/4” x 9’ coiled hose, 1/4” x 1/2” brass bushing, pulsation plug, and two stainless steel brackets for mounting pressure switch in the well
NOTE: It is the customer’s responsibility for ordering proper product to meet local, state and federal code regulations.
PSP
CG
5J1-PA
LD-S-10 PA CW-5-10-WA-PA
-
16 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
TM ALUMINUM WELL CAPS
DICKEN ALUMINUMW
ELL CAPS
PartNumber Model
I.D. Casing Size (In.)
O.D. Casing Size (In). Conduit Fitting
Shipping Weight (Lbs.)
Qty./Carton
List PriceEach
952800952802952804952806952805952812952824952808952810952813
WTCC-4WTCC-5
WTCC-5.6WTCC-6WTCC-6WTCC-6
WTCC-6LC* WTCC-6.6WTCC-8WTCC-8
45
5-5/86666
6-5/888
4-1/25-9/16
66-5/86-5/86-5/86-5/8
78-5/88-5/8
1” NPT1” NPT1” NPT1” NPT
1-1/4” NPT1-1/2” NPT
1” NPT1-1/4” NPT1-1/4” NPT1-1/2” NPT
2.73.03.23.53.53.54.13.74.05.0
201815151515
IND.1088
See separate
pricelist
WTCC-Style CAST ALUMINUMFeatures:• WTCC caps Water Systems Council - PAS-2 listed• Cast aluminum with stainless steel bolts• WTCC models are vented to meet state codes• Can be personalized, 50 piece minimum• Five bolt pulldown for sure seal and tamper resistance• Heavy Buna-N Seal prevents foreign matter intrusion• Buna-N rubber seal is internal to cap assembly and is not exposed to outside environment
• NOTE: WTCC-6LC is locking.
PartNumber Model
O.D. Casing Size (In). Conduit Fitting
Weight (Lbs.)
List PriceEach
952848952849
10AWT12AWT
10-3/412-3/4
2 NPT2 NPT
9.011.0
See separateprice list
AWT-Style
PartNumber Model
I.D. Casing Size (In.)
O.D. Casing Size (In).
Shipping Weight (Lbs.)
Qty./Carton
List PriceEach
952814952816
WTTC 5 CL WTTC 6 CL
56
5-9/166-5/8
3.03.5
1815
See separateprice list
WTCC - Style CHLORINE CAPFeatures:• Tapped 1 1/4” NPT to accommodate pellet chlorinators
PartNumber Model
I.D. Casing Size (In.)
O.D. Casing Size (In). Conduit Fitting
Shipping Weight (Lbs.)
Qty./Carton
List PriceEach
952902952906952908952910
WTCI-5WTCI-6
WTCI-6.6WTCI-8
56
6-5/88
5-9/166-5/8
78-5/8
1” NPT1” NPT
1 1/4” NPT1 1/4” NPT
4.65.15.2
20.2
1815108
See separate
pricelist
WTCCI - Style CAST IRONFeatures:• WTCCI Caps Water Systems Council - PAS-97 (04) listed• Cast iron with stainless steel bolts• WTCCI models are vented to meet state codes• Five bolt pulldown for sure seal and tamper resistance• Heavy Buna-N Seal prevents foreign matter intrusion• Buna-N rubber seal is internal to cap assembly and is not exposed to outside environment• Equipped with an ultra fl exible 6” grounding connector 12 AWG, UL486A and
UL486Clisted and tested to CSA standards
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 17
TM ALUMINUM WELL CAPS
MAASS™ THERMOPLASTIC/ABS WELL CAPS
PartNumber Model
I.D. Casing Size (In.)
O.D. Casing Size (In).
ConduitFitting
Shipping Weight (Lbs.)
Qty./Carton
List PriceEach
952920952925952930
SCP4SCP5SCP6
456
4 1/25 9/166 5/8
1” NPT1” NPT1” NPT
.881.31.5
111
See separate
pricelist
SCP-StyleFeatures: • SCP caps Water Systems Council PAS-2 listed• Gasket to prevent foreign intrusion• When cap top removed - wire completely exposed for easy service• Stainless steel nuts and bolts• Downward facing stainless steel vent• ABS bottom, can be solvent welded to PVC casing
PartNumber Model
I.D. Casing Size (In.)
O.D. Casing Size (In).
Shipping Weight (Lbs.)
Qty./Carton
List PriceEach
952700952702952704952706952708952710952712952714
CC-4CC-4.5CC-5CC-56CC-6CC-66CC-8CC-10
44-1/2
55-5/8
66-5/8
810
4-1/25
5-9/166
6-5/87
8-5/810-3/4
1.21.31.7
1.751.42.02.84.1
362920212118128
See separatepricelist
CC-StyleFeatures: • Can be personalized, 50 piece minimum• Cast aluminum alloy 319 - will not crack or warp• Fitted for 1”conduit• Three square head stainless steel cup point set screws• Designed for 1/64” clearance fi t to prevent foreign matter intrusion• Model CC-ID cap 1-1/4” conduit as standard
PartNumber Model
I.D. Casing Size (In.)
O.D. Casing Size (In).
Shipping Weight (Lbs.)
Qty./Carton
List PriceEach
952600952602
952604
952606952608952610952612
PC-4PC-5
PC-566 (2-step) PC-66PC-8
PC-10PC-12
45
5-5/8 upper6 lower
6-5/88
1012
4-1/25-9/16
66-5/8
78-5/8
10-3/412-3/4
.71.75
1.8
2.22.83.55.3
3622
21
211284
See separatepricelist
PC-StyleFeatures: • Cast aluminum alloy 319 - will not crack or warp• Square head zinc plated steel cup point set screw
PartNumber Model
O.D. Casing Size (In).
Weight (Lbs.)
List PriceEach
952748952750
10S12S
10-3/412-3/4
5.758.6
See separateprice list
MAASS™ SUBMERSIBLE WELL CAPSFeatures: • Heavy duty cast aluminum - will not crack or warp• Stainless steel set screws
• NOTE: Locking well caps illustrated on page 73.
MAAS
S/DI
CKEN
S AL
UMIN
UM
& PL
ASTI
C W
ELL
CAPS
-
18 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
WELL SECURE
WELL SCURE
POND/IRRIGATION FILTERS
Part Number Fits Well Cap Sizes Color Cap Circumference List Price952952952954
2 Inch MW4 inch MW
RedRed
9”14-3/4”
See separateprice list
Features:• Provides visible proof of the integrity of the well• Protect your company from unwarranted customer claims• Can be custom printed with your company name, logo, phone number• Insure the integrity of monitoring wells between sampling• Easily applied by heat source
Monitoring and Test Well Size Chart
Part Number Fits Well Cap Sizes Color Cap Circumference List Price952961952962952963952964952965952966952967952968952969
PC-4CC-4, CC-4.5
WTCC-4, CC-5, PC-566WTCC-5, CC-6, PC-66
WTCC-5.6, CC-6.6WTCC-6, PC-8
WTCC-6.6CC-8
WTCC-8
GreenGreenGreenGreenGreenGreenGreenGreenGreen
16-17”19-21”22-24”24-26”26-27”29-30”30-31”31-32”36-37”
See separateprice list
Maass Midwest Well Cap Size Chart
Part Number List Price
952951 Well Secure Heat Gun See separateprice list
Well Secure Heat GunFeatures:• Instant push button start• Variable head adjustment• Attaches to standard 14 oz. propane tank (not included)
POND/IRRIGATION FILTERSFeatures:• Effective means of keeping algae and seaweed out of pumping system• Manufactured from heavy PVC and plastic• 2” suction connectors• Outside screen used 1/4” holes• 2” PVC check valves as standard• Area between screens fi lled with bulk fi sh-safe fi lter mating• Can be manifolded to increase capacity• Irregular 3/8” or larger pea gravel can also be used as fi lter media
Part Number Model GPM Screen O.D. Inner Screen Weight Ea. (Lbs.) List Price
940185940186
40 G80 G
40 Gal.80 Gal.
12”6”
6”2”
717
See separateprice list
Note: Filter stands are also available
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 19
STRAINERS
STRA
INER
S/FL
OWSL
EEVE
STEEL SUCTION STRAINERFeatures:• General purpose strainer• Strainer holes are 3/8”
Part Number Size (Inches) Height (Inches) O.D. (Inches) Weight (Lbs.) List Price940168940171940174940177940180940183
1-1/22
2-1/2346
3-1/244559
566779
1.52.02.03.03.011.0
See separateprice list
SUBMERSIBLE PUMP STRAINERFeatures: • Protect submersible pump from costly sand damage• Bottom cap manufactured from FDA approved plastic• Stainless steel standard• Seams are spot-welded
Part Number Size (in. X ft.) Gauze Weight (Lbs.) List Price915620915622915630915632915641915642915638915639
3 x 23 x 23 x 43 x 44 x 44 x 44 x 64 x 6
80100801008010080100
1.41.42.32.33.23.25.25.2
See separateprice list
• Please specify pump manufacture when ordering 3” pump strainers• 3” size fi ts 4” I.D. casing• 4” size fi ts 4 1/2” I.D. or larger casing
FEMALE SUCTION PIPE STRAINERFeatures: • Wire wound stainless steel strainer
Part Number Model Slot Size Pipe Size Weight (Lbs.) List Price
92320 1024 10 2 2.1 See separateprice list
FLOWSLEEVEFeatures:• An effi cient pump cooling system at an economical cost• Quick and easy installation• Recommended for longer life• Directs fl ow over motor, properly cooling motor• Easy to assemble using standard schedule 40 PVC pipe• Excellent for storage tanks, ponds, cisterns and water well aeration systems
Part Number Description List Price962500962510962520962530962550
4” Flowsleeve - 1” Discharge4” Flowsleeve - 1-1/4” Discharge4” Flowsleeve - 1-1/2” Discharge
4” Flowsleeve - 2” DischargePond and Lake Pump Mounting Stand - keeps pump off lake bottom
See separateprice list
542
1536-S
-
20 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
GEOTHERMAL PRODUCTS
GEOTHERMAL PRODUCTS
MODEL JXX - PITLESS BURY UNITSFeatures:• Designed to accommodate two pumps in one well casing• Excellent for geothermal closed systems• Can be used for one pump and one return pipe well• Available with male threaded end or plain end for welding• Standard 18” minimum overall length
Part Number Model Number Well Casing Size Water Outlet & Drop Pipe Size List Price Each
926415926435926440926460926475926485
5JXX-16JXX-1
6JXX-1 1/48JXX-18JXX-2
10JXX-2
5668810
11
1-1/4122
See separateprice list
SURE CLIP LLC GEOTHERMAL PIPE SPACERSFeatures:• Increases vertical bore heat exchange by 35%• Anti-catch design allows the tremie to be extracted without a snag• Patent pending• Made in the USA
“DOG BONE” SPACER
Part Number Model Number Pipe Size SDR11 Minimum Bore Diameter List Price Each
933300933302933304
GSC-75-2GSC-100-2GSC-125-2
3/4”1”
1-1/4”
5.50”5.50”6.00”
See separateprice list
Part Number Model Number Pipe Size SDR11 Minimum Bore Diameter List Price Each
933306933308
GSC-75-4GSC-100-4
3/4”1”
5.50”6.00”
See separateprice list
“QUAD BONE” SPACER
GEOTHERMAL BRASS ELBOWFeatures• 1” X 1” Elbow• One port male X sweat combination• Tapped 1/4” for heat pump sensor
Part Number IPS X IPS Quantity per Carton Weight per Carton List Price Each
406502 1” X 1” 10 7.5 See separateprice list
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 21
SEDI
MENT
FILT
ERS
REPA
IR P
ARTS
SEDIMENT FILTERSSPINDOWN™ MODEL
Features:• PVC body• Ball valve for fl ushing sand and sediment• Polyester fi lter screen is reusable• Sand and sediment is visible through clear reservoir• Maximum operating pressure 150 psi at 73O F• Individually boxed
Part Number
Model Number Pipe Size Mesh Length Width
List Price Each
962002962004962006962008962010962012962014962020962022962024962026962028962030962032962038962040962042962044962046962048962050962056962058962060962062962064962066962068
3/4-24F3/4-30F3/4-40F3/4-60F
3/4-100F3/4-140F3/4-250F
1-24F1-30F1-40F1-60F1-100F1-140F1-250F
1-1/2-24F1-1/2-30F1-1/2-40F1-1/2-60F
1-1/2-100F1-1/2-140F1-1/2-250F
2-24F2-30F2-40F2-60F2-100F2-140F2-250F
3/4”3/4”3/4”3/4”3/4”3/4”3/4”
1” slip1” slip1” slip1” slip1” slip1” slip1” slip
1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip
2” slip2” slip2” slip2” slip2” slip2” slip2” slip
24304060
10014025024304060
10014025024304060
10014025024304060
100140250
11-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/811-3/8
1515151515151518181818181818
7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”
5”5”5”5”5”5”5”
5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”
See separateprice list
SPINDOWN™ MODEL
Part Number Model Number Size (Inches) List Price Each
962300962302962306962308962310962312962318962320962324962326962328962330962336962338962342962344962346962348
NT30SC24NT30SC30NT30SC60
NT30SC100NT30SC140NT30SC250NT60SC24NT60SC30NT60SC60
NT60SC100NT60SC140NT60SC250NT120SC24NT120SC30NT120SC60NT120SC100NT120SC140NT120SC250
3/4 and 13/4 and 13/4 and 13/4 and 13/4 and 13/4 and 1
1-1/21-1/21-1/21-1/21-1/21-1/2
222222
See separateprice list
REPAIR PARTSPOLYESTER FILTER ELEMENTS
• Repair parts replace RuscoTM fi lters parts
-
22 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
SEDIMENT FILTERS
SEDIMENT FILTERSREPAIR PARTS
SPINDOWN™ SEDIMENT TRAPPER MODELFeatures:• Centrifuge spin sown action removes sand and coarse sediment• Several mesh sizes available• Polyester fi lter screens are replaceable• Sediment is easily removed by opening ball valve at bottom of fi lter• Hand tighten only -- use of tools voids warranty• Sand and sediment is visible through clear reservoir
Part Number Model Number Pipe Size Mesh Length Width List Price Each962100962102962104962106962108962110962112962118962120962122962124962126962128962130962140962142962144962146962148962150962152962160962162962164962166962168962170962172
3/4-24STF3/4-30STF3/4-40STF3/4-60STF
3/4-100STF3/4-140STF3/4-250STF
1-24STF1-30STF1-40STF1-60STF1-100STF1-140STF1-250STF
1-1/2-24STF1-1/2-30STF1-1/2-40STF1-1/2-60STF
1-1/2-100STF1-1/2-140STF1-1/2-250STF
2-24STF2-30STF2-40STF2-60STF2-100STF2-140STF2-250STF
3/4”3/4”3/4”3/4”3/4”3/4”3/4”
1” slip1” slip1” slip1” slip1” slip1” slip1” slip
1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip1-1/2” slip
2” slip2” slip2” slip2” slip2” slip2” slip2” slip
24304060
10014025024304060
10014025024304060
10014025024304060
100140250
14-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/214-1/2
1515151515151518181818181818
7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”7-1/4”
5”5”5”5”5”5”5”
5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-1/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”5-3/4”
See separateprice list
SEDIMENT TRAPPER MODELPart Number Model Number Size (Inches) List Price Each
962360962362962366962368962370962372962378962380962382962384962386962390962400962402962406962408962410962412
NT1SC24NT1SC30NT1SC60NT1SC100NT1SC140NT1SC250NT1.5SC24NT1.5SC30NT1.5SC60
NT1.5SC100NT1.5SC140NT1.5SC250
NT2SC24NT2SC30NT2SC60NT2SC100NT2SC140NT2SC250
3/4 and 13/4 and 13/4 and 13/4 and 13/4 and 13/4 and 1
1-1/21-1/21-1/21-1/21-1/21-1/2
222222
See separateprice list
POLYESTER FILTER ELEMENTS
• Repair parts replace RuscoTM fi lters parts
REPAIR PARTS
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 23
Part Number Model Number Description Size (Inches) List Price Each962250962252962254962256962258962276962278962270962260962262962280
PVNT30BNT60B
NT120BNT30CNT60C
NT120CNT1CNT30SNT60S
NT120S
Purge ValveFilter BodyFilter BodyFilter Body
Filter Cover - SpindownTM ModelFilter Cover - SpindownTM ModelFilter Cover - SpindownTM Model
Filter Cover - Trapper Model“O” Ring Trapper & SpindownTM“O” Ring Trapper & SpindownTM“O” Ring Trapper & SpindownTM
1/2 FPT1”
1-1/2”2”
3/4” TO 1”1-1/2”
2”1”1”
1-1/2”2”
See separateprice list
REPA
IR P
ARTS
TRI-S
EAL/
K-PA
CKER
REPAIR PARTSFl
ow R
ate
GPM
120
100
80
60
40
20
0
2”
1-1/2”
1”
1 2 3 4 5 6 7 8 9 10PSI Loss
Inlet/Outlet Flow Rate 1” 1” 1 - 25 Gpm 1 1/2” 10 - 50 Gpm 2” 20 - 100 Gpm
Mesh Opening Microns24304060100140
.028
.021
.015
.010
.006
.004
711533381254152104
MESH CONVERSION CHART
-
24 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
SANDBLOCKERTM WELL SCREENS
SANDBLOCK WELL SCREENS
Patent No. 5,833,853 | New Innovation in Sand Retention
• Features:• Large infl ow area of 32%, providing twice the fl ow of wire wrap screens• Rugged design, strongest stainless steel screen in market today• One size fi ts all, from comparible slot size of 3 and larger• Resistant to plugging and errosion, pore size distribution replicates sand size distribution• Gravel pack not required• Stainless steel construction throughout
Part Number Size Screen O.D. Screen Length List Price Each
916802-3916802-4
2”2”
2.502.50
36”48”
See separateprice list
TRANSMITTING CAPACITYGallons per Minute per Foot of Screen at 0.1 foot per second
Screen Pipe Size (Inches) GPM/FT
23456
812162125
STAINLESS STEEL DRIVE POINTS | MALE X POINT
PIPE SIZE 2” NPT MALE X FEMALEPart Number Size Screen O.D. Screen Length List Price Each916812-4 2” 2.50 48” See separate price list
SANDBLOCKER™ WELL SCREENSSTAINLESS STEEL EXTENSIONS
Note: Male x Male, Female x Female and ASTM Flush Fitting available.
WELL SCREENSPIPE SIZE 2” NPT MALE X FEMALE
Part Number Size Screen O.D. Screen Length List Price Each916813-3916813-5
3”3”
3.503.50
3’5’ See separate price list
PIPE SIZE 3” NPT FEMALE X FEMALE916853-3916853-5
3”3”
3.503.50
3’5’ See separate price list
PIPE SIZE 3” NPT FEMALE X PLATE BOTTOM
916833-3 3” 3.50 3’ See separate price list
PIPE SIZE 4” NPT FEMALE X FEMALE
916854-4 4” 4.50 4’ See separate price list
PIPE SIZE 4” NPT MALE X FEMALE
916814-4 4” 4.50 4’ See separate price list
PIPE SIZE 4” NPT MALE X PLATE BOTTOM916834-2916834-4
4”4”
4.504.50
2’4’ See separate price list
PIPE SIZE 5” NPT MALE X PLATE BOTTOM
916835-3 5” 5.50 3’ See separate price list
PIPE SIZE 5” WELD RING X WELD RING916885-3916885-6
5”5”
5.505.50
3’6’ See separate price list
PIPE SIZE 6” NPT MALE X PLATE BOTTOM
916836-5 6” 6.50 5’ See separate price list
PIPE SIZE 6” WELD RING X WELD RING
916886-5 6” 6.50 5’ See separate price list
Note: • Longer screen lengths available by splicing various
standard lengths together.• Other sizes available. Contact factory for price and
availability.
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 25
DRIV
E W
ELL
POIN
TSFL
USH
WEL
L PO
INTS
DRIVE WELL POINTSMIDWEST WELD PROCESS WELL POINT
Features:• Rugged design with octagonal ductile iron head to prohibit turning in tough driving• Easily extended in the fi eld by removing head and coupling together with second well
point for added capacity• Bronze MIG weld top and bottom to prohibit jacket shift or peeling• 3/16” diameter spotweld on 1” centers to prevent seam opening• Stainless steel with 1/8” staggered perforations for maximum open area• Available in 50-60-80-100 mesh stainless steel for long life screening• Other custom lengths and styles available• Lead Free: ≤ .025% Lead Content
Part Number Model Number Gauze Pipe Size Pipe Lg. X JacketWeight (Lbs.)
List Price Each
915698915702915716915720915734915738915752915756915770915774915788915792915834915838915852915856915870915874915888915892
SS90SS90SS94SS94SS98SS98
SS100SS100SS102SS102SS110SS110SS164SS164SS168SS168SS172SS172SS176SS176
6080608060806080608060806080608060806080
1-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/4
22222222
24 x 1824 x 1830 x 2430 x 2436 x 3036 x 3042 x 3642 x 3648 x 4248 x 4260 x 5460 x 5430 x 2430 x 2436 x 3036 x 3048 x 4248 x 4260 x 5460 x 54
667788
1010111113131212141418182222
See separateprice list
STAINLESS STEEL
OPEN END WELL SCREENFeatures:• Use when jetting or washing down wells using a sand shark or backwash valve• Provides additional capacity when coupled with a well point
Part Number Model Number Gauze Pipe Size Pipe Lg. X JacketWeight (Lbs.)
List Price Each
916345916348916400916404916406
SS99SS103SS169SS173SS177
6060606060
1-1/41-1/4
222
36 x 3048 x 4236 x 3048 x 4260 x 54
7101115
17.8
See separateprice list
FLUSH WELL POINTSFeatures:• 1-1/4” fl ush point fi ts in 2” well and will pass through 2” closed pattern drive shoe• SS - Stainless steel• Used in tubular drilled wells
Part Number Trade Number Gauze Pipe Size Pipe Lg. X JacketWeight (Lbs.)
List Price Each
916064916068916088916092916142916146916160916164916196916200
SS121SS121SS125SS125SS129SS129
SS131.5SS131.5SS570SS570
60806080608060806080
1-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/4
36 x 3036 x 3042 x 3642 x 3648 x 4248 x 4254 x 4854 x 4860 x 5460 x 54
99
1010111113131414
See separateprice list
-
26 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
WASHER WELL POINTS
WASHER W
ELL POINTSW
ELL POINT ACCESSORIES
Features:• For use in ground with sharp stones or rocks• Drilled and countersunk holes are covered with wire cloth and held in place by washers.
Part Number Trade Number Gauze Pipe Size Pipe Lg. X JacketWeight (Lbs.)
List Price Each
916460916462916482916486916500916504916518916522916594916598916612916616
SS301SS301SS302SS302SS303SS303SS305SS305SS325SS325SS327SS327
608060806080608060806080
1-1/41-1/41-1/41-1/41-1/41-1/41-1/41-1/4
2222
242430303636484836364848
667788111113131616
See separateprice list
STAINLESS STEEL MONITOR POINTFeatures:• Stainless steel tubing and point can be fabricated to provide an excellent aid for monitoring• Minimum quantity of twelve units required• Refer to page 73 for monitoring points
WELL POINT ACCESSORIES
Part Number Pipe Size (Inches) Approx. Weight (Lbs.) Quantity Per Box List Price Each941574941576
1-1/42
1.01.5
2515
See separateprice list
USA MADE DRIVE COUPLINGS GALVANIZED
Part Number Pipe Size (Inches) Approx. Weight (Lbs.) Quantity Per Box List Price Each930562930568
1-1/42
1.53.25
2510
See separateprice list
DRIVE CAPS MALLEABLE
Part Number Pipe Size (Inches) Approx. Weight (Lbs.) List Price Each922804922810
1-1/42
.60
.75See separate
price list
BACKWASH VALVESFeatures:• No lead brass: ≤ .025% Lead Content• Stainless steel spring and ballcheck
Part Number Valve Size (Inches)Pressure Pipe Tap
(Inches) ThreadsApprox. Weight
(Lbs.) List Price Each
930141 2 NPT Male 1 NPS Left Hand 2.0 See separateprice list
“SAND SHARK” BACKWASH VALVESFeatures:• Cast iron housing
810
9
618
800
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 27
WEL
L SE
AL A
CCES
SORI
ESW
ELL
SEAL
S
WELL SEAL ACCESSORIES
Part Number Diameter Length Thread Size List Price 930632930634
7/8”1-1/4”
2”2-9/32”
1/2” NPT3/4” NPT
See separateprice list
COPPER WELL SEAL AIR VENTFeatures:• Vermin proof• Fabricated from copper• Low profi le
Part Number Diameter Length Thread Size List Price 930630 1 5-1/2” 1/2” NPT See separate price list
PVC WELL SEAL AIR VENTFeatures:• Fits most solid or split top well seals• Slotted area provides vermin proof protection• Manufactured from rugged PVC
Part Number O.A. Length Vent Height Thread Size Weight List Price 934634934636
13”17”
8”12”
1/2” NPT1/2” NPT
1.351.10
See separateprice list
STEEL WELL SEAL AIR VENTFeatures:• Fabricated from 1/2” heavy duty galvanized steel• Brass and stainless steel 24 mesh screen
WELL SEALSSINGLE PIPE WELL SEALS - SPLIT TOP
Features:• Split cast iron top for ease of installation• Cable seal kit included• 6” seal and above has 1” cable hole• Vent opening 1/2” NPT• 4” and 5” seals have 3/4” cable hole
Part Number Model Number Size Casing I.D.I.D. X Drop Pipe Hole LocationWeight (Lbs.)
List Price Each
930647930650930656930713930716930720930755930757930782930785930789930809930811930815930850930852930856930858930860
459S459S459S459S459S459S459S459S459S459S459S459S459S459S459S459S459S459S459S
4 x 14 x 1-1/4
4 x 25 x 1
5 x 1-1/45 x 2
5-5/8 x 15-5/8 x 1-1/4
6 x 16 x 1-1/4
6 x 26 -/4 x 1
6-1/4 x 1-1/46-1/4 x 2
8 x 18 x 1-1/4
8 x 28 x 38 x 4
OffsetOffsetOffsetCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenterCenter
3.93.22.76.45.74.98.16.99.99.77.77.58.17.817.317.416.114.111.7
See separateprice list
459S
Note: 3/4” can be used on 8” or larger well seal
-
28 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
WELL SEALS
WELL SEALS
Part Number Model Number Size Casing I.D.I.D. X Drop Pipe Hole LocatonWeight (Lbs.)
List Price Each
931297
931300
359
359
2 x 1
2 x 1-1/4
Center
Center
2.5
2.3See separate
price list
SINGLE PIPE WELL SEALSFeatures:
• One piece cast iron top
• Provided with optional pointed set screws for threaded pipe
Part Number Model Number Size Casing I.D.I.D. X Drop PipeWeight (Lbs.)
List Price Each
950004
950006
950015
950017
950031
950033
559
559
559
559
559
559
4 x 1-1/4 x 1
4 x 1-1/4 x 1-1/4
5 x 1-1/4 x 1
5 x 1-1/4 x 1-1/4
6 x 1-1/4 x 1
6 x 1-1/4 x 1-1/4
3.0
3.0
5.0
5.0
9.0
9.0
See separateprice list
DOUBLE PIPE WELL SEALS - SPLIT TOPFeatures:
• Two piece cast iron top
SINGLE PIPE WELL SEALS - SOLID TOPFeatures:
• One piece cast iron top meets Wisconsin State Code
• Cable seal kit included
• Vent opening 1/2” NPT
• 6” seal has 1” cable hole
Part Number Model Number Size Casing I.D.I.D. X Drop Pipe Hole LocationWeight (Lbs.)
List Price Each
930640
930654
931259
931269
931651
931275
931278
931282
459W
459W
459W
459W
459W
459W
459W
459W
4 x Blank
4 x 1
4 x 1
5 x 1
6 x 0
6 x 1
6 x 1-1/4
6 x 2
Blank
Center
Offset
Center
None
Center
Center
Center
4.0
3.9
3.8
6.5
8.7
8.6
8.5
7.5
See separateprice list
459W
359
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 29
Part Number Model Number Size Casing I.D.I.D. X Drop PipeTop Plate Thickness
Working Load (Lbs.)
Weight (Lbs.)
List Price Each
954010954011954012954013954004954005954006954007954015954016954017954018954020954021954022954023954024954025954026954027954029954030954031954032954033954036954037954038954039954040954041954042954045954046954047954048954049954050954051954052954053954054954055954056954057954058954059954060954061954062954070954071954072954073954074954075954076954077954080954081
WS41WS41.25WS41.5WS42
WS5OD1WS5OD1.25
WS6OD1WS6OD1.25
WS51WS51.25WS51.5WS52WS61
WS61.25WS61.5WS62
WS62.5WS63
WS6 1/4 x 1WS6 1/4 x 1.25
WS6 1/4 x 2WS71
WS71.25WS71.5WS72WS81
WS81.25WS81.5WS82
WS8.25WS83WS84WS101
WS101.25WS101.5WS102
WS102.5WS103WS104WS105WS106WS121
WS121.25WS121.5WS122
WS122.5WS123WS124WS125WS126
WS141.25WS141.5WS142
WS142.5WS143WS144WS145WS146WS164WS166
4” to 4 -/4” x 1”4” to 4-1/4” x 1-1/4”4” to 4-1/4” x 1-1/2”
4” to 4-1/4” x 2”4-1/2” to 4-3/4” x 1”
4-1/2” to 4-3/4” x 1-1/4”5-3/16” to 5-7/16” x 1”
5-3/16” to 5-7/16” x 1-1/4”5” to 5-1/4” x 1”
5” to 5-1/4” x 1-1/4”5” to 5-1/4” x 1-1/2”
5” to 5-1/4” x 2”5-3/4” to 6-1/4” x 1”
5-3/4” to 6-1/4” x 1-1/4”5-3/4” to 6-1/4” x 1-1/2”
5-3/4” to 6-1/4” x 2”5-3/4” to 6-1/4” x 2-1/2”
5-3/4” to 6-1/4” x 3”5-3/4” to 6-1/4” x 1”
5 -/4” to 6-1/4” x 1-1/4”5-3/4” to 6-1/4” x 2”6-5/8” to 7-1/4” x 1”
6-5/8” to 7-1/4” x 1-1/4”6-5/8” to 7-1/4” x 1-1/2”
6-5/8” to 7-1/4” x 2”7-3/4” to 8-1/4” x 1”
7-3/4” to 8-1/4” x 1-1/4”7-3/4” to 8-1/4” x 1-1/2”
7-3/4” to 8-1/4” x 2”7-3/4” to 8-1/4” x 2-1/2”
7-3/4” to 8-1/4” x 3”7-3/4” to 8-1/4” x 4”
9-3/4” to 10-1/4” x 1”9-3/4” to 10-1/4” x 1-1/4”9-3/4” to 10-1/4” x 1-1/2”
9-3/4” to 10-1/4” x 2”9-3/4” to 10-1/4” x 2-1/2”
9-3/4” to 10-1/4” x 3”9-3/4” to 10-1/4” x 4”9-3/4” to 10-1/4” x 5”9-3/4” to 10-1/4” x 6”11-3/4” to 12-1/4” x 1”
11-3/4” to 12-1/4” x 1-1/4”11-3/4” to 12-1/4” x 1-1/2”
11-3/4” to 12-1/4” x 2”11-3/4” to 12-1/4” x 2-1/2”
11-3/4” to 12-1/4” x 3”11-3/4” to 12-1/4” x 4”11-3/4” to 12-1/4” x 5”11-3/4” to 12-1/4” x 6”13 1/4” to 14” x 1 1/4”13 1/4” to 14” x 1 1/2”
13 1/4” to 14” x 2”13 1/4” to 14” x 2 1/2”
13 1/4” to 14” x 3”13 1/4” to 14” x 4”13 1/4” to 14” x 5”13 1/4” to 14” x 6”15 1/4” to 16” x 4”15 1/4” to 16” x 6”
3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/16”3/8”3/8”3/16”3/16”3/16”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”3/8”1/2”5/8”3/8”3/8”3/8”3/8”1/2”5/8”5/8”3/4”3/4”1/4”3/8”3/8”1/2”1/2”5/8”5/8”3/4”3/4”3/8”1/2”1/2”1/2”5/8”3/4”3/4”1”
3/4”1”
2,1412,1412,1412,1411,5201,5201,5201,5201,4501,4501,4501,4501,1001,1001,1001,1009,1709,1701,1501,1501,1502,0002,0002,0002,0001,6501,6501,6501,6506,9009,00022,5003,7003,7003,7003,7008,60016,20016,20030,00030,000
8852,8702,8706,6006,60012,00012,00020,50021,0002,2804,8504,8504,8509,45016,00016,00038,00012,50030,000
1.801.761.651.552.652.352.902.902.702.402.552.853.603.603.353.354.705.003.603.603.355.455.655.405.307.457.306.756.908.357.509.6011.7511.9515.0514.7017.1519.5517.6517.5015.1026.0026.0026.0026.0026.0026.0026.0026.0026.00
40494847545967678091
See separateprice list
PACIFIC HYDRO™ STEEL SANITARY WELL SEALSFeatures:• Made from high strength steel• Steel plates powder coated for durable fi nish• Utilizes soft poly-vinyl packers• Unique packer design allows for wide range of casing sizes• Bolts and washers zinc plated• 1” threaded wire drop hole standard on most well seals• 1-1/4” threaded wire drop holes standard on 10” and larger seals• Vent opening 1/2” on 4” to 7” well seals• Vent opening 3/4” on 8” well seals and larger
WEL
L SE
ALS
WELL SEALS
• NOTE:• Custom sizes available. Contact factory for quotation.• Also available manufactured from stainless steel.
-
30 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
WELL SEALS
WELL SEALS
Part Number Model Number Size Casing I.D.I.D. X Drop PipeTop Plate Thickness
Working Load (Lbs.)
Weight (Lbs.)
List Price Each
954311954312954313954320954321954322954323954326954327954328954329954330954331954332954333954336954337954338954339
WS51.25WS51.5WS52
WS61 X 3/8”WS61.25 X 3/8”WS61.5 X 3/8”WS62 X 3/8”
WS6.4.1 X 3/8”WS6.4.125 X 3/8”WS6.4.15 X 3/8”WS6.4.2 X 3/8”WS71 X 3/8”
WS71.25 X 3/8”WS71.5 X 3/8”WS72 X 3/8”WS81 X 3/8”
WS81.25 X 3/8”WS81.5 X 3/8”WS82X 3/8”
5” to 5-1/4” x 1-1/4”5” to 5-1/4” x 1-1/2”
5” to 5-1/4” x 2”5-3/4” to 6-1/4” x 1”
5-3/4” to 6-1/4” x 1-1/4”5-3/4” to 6-1/4” x 1-1/2”
5-3/4” to 6-1/4” x 2”6-1/4” to 6-1/2” x 1”
6-1/4” to 6-1/2” x 1-1/4”6-1/4” to 6-1/2” x 1-1/2”
6-1/4” to 6-1/2” x 2”6-5/8” to 7-1/4” x 1”
6-5/8” to 7-1/4” x 1-1/4”6-5/8” to 7-1/4” x 1-1/2”
6-5/8” to 7-1/4” x 2”7-3/4” to 8-1/4” x 1”
7-3/4” to 8-1/4” x 1-1/4”7-3/4” to 8-1/4” x 1-1/2”
7-3/4” to 8-1/4” x 2”
3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”3/8”
9,1709,1709,1709,1009,1009,1009,1009,0009,0009,0009,0008,9008,9008,9008,9007,0207,0207,0207,020
3.353.353.35
4444444444444444
See separateprice list
SUPER WELL SEALS• 3/8” Thick Steel Top Plate
Part Number Model Number Size Casing I.D.I.D. X Drop PipeTop Plate Thickness
Working Load (Lbs.)
Weight (Lbs.)
List Price Each
954223954224954225954239954240954241954242954248954249954250954259954260
WS62WS62.5WS63WS82
WS82.5WS83WS84WS102
WS102.5WS103WS123WS124
5-3/4” to 6-1/4” x 2”5-3/4” to 6-1/4” x 2-1/2”
5-3/4” to 6-1/4” x 3”7-3/4” to 8-1/4” x 2”
7-3/4” to 8-1/4” x 2-1/2”7-3/4” to 8-1/4” x 3”7-3/4” to 8-1/4” x 4”
9-3/4” to 10-1/4” x 2”9-3/4” to 10-1/4” x 2-1/2”
9-3/4” to 10-1/4” x 3”11-3/4” to 12-1/4” x 3”11-3/4” to 12-1/4” x 4”
1/2”1/2”5/8”5/8”3/4”3/4”1”
5/8”3/4”1”1”1”
92509250
17,00016,50033,00033,00038,00016,00031,00039,00033,00033,000
5.55.45.89.015.0
12.8513.518.027.425.936.534.2
See separateprice list
PACIFIC HYDRO™ STEEL THICKER TOP PLATE SANITARY WELL “SUPER SEALS”
• Custom sizes available. Contact factory for quotation. Also available manufactured from stainless steel.
Part Number Model Number Size Casing I.D.I.D. X Drop PipeWeight (Lbs.)
List Price Each
954100954101954102954105954107954110954111954112954114954116954120954123954124954125954126
JS41.75JS41.1
JS41.25.1JS51.25.1
JS51.5.1.25JS61.1
JS61.25.1JS611.251.25
JS61.5.1JS61.5.1.25JS71.25.1JS81.25.1
JS81.25.1.25JS81.5.1.25JS81.5.1.5
4” to 4-1/4” x 1” x 3/4”4” to 4-1/4” x 1” x 1”
4” to 4-1/4” x 1-1/4” x 1”5” to 5-1/4” x 1-1/4” x 1”
5” to 5-1/4” x 1-1/2” x 1-1/4”5-3/4” to 6-1/4” x 1” x 1”
5-3/4” to 6-1/4” x 1-1/4” x 1”5-3/4” to 6-1/4” x 1-1/4” x 1-1/4”
5-3/4” to 6-1/4” x 1/2” x 1”5-3/4” to 6-1/4” x 1-1/2” x 1-1/4”
6-5/8” to 7-1/4” x 1-1/4” x 1”7-3/4” to 8-1/4” x 1-1/4” x1”
7-3/4” to 8-1/4” x 1-1/4” x1-1/4”7-3/4” to 8-1/4” x 1-1/2” x1-1/4”7-3/4” to 8-1/4” x 1-1/2” x1-1/2”
222334444458488
See separateprice list
PACIFIC HYDRO™ STEEL JET WELL SEALS
• Custom sizes available. Contact factory for quotation. Also available manufactured from stainless steel.
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 31
WEL
L SE
ALS
TOOL
& T
HREA
D CO
MPOU
NDS
WELL SEALS
Part Number Model Number Size Casing I.D.I.D. X Drop PipeTop Plate Thickness
Working Load (Lbs.)
Weight (Lbs.)
List Price Each
952620952622952626
OTT4.1OTT4.1-1/4OTT4.1.2
4-1/2” X 1”4-1/2” X 1-1/4”
4-1/2” X 2” Offset
3/4”3/4”3/4”
6,0006,0006,000
0.90.91.0
See separateprice list
OVER THE TOP CAST IRON SANITARY WELL SEALS• Three stainless steel cup point set screws• Seals have 1/2” vent hole as standard• Positive Buna-N-Seal
Part Number Model Number Size Casing I.D.I.D. X Drop PipeTop Plate Thickness
Working Load (Lbs.)
Weight (Lbs.)
List Price Each
952640952642952644952646952650952652952654952656952657952658952660952662952664952666952668952669
OTT67.1OTT67.1 1/4” OTT67.1 1/2”
OTT67.2OTT8.1
OTT8.1 1/4”OTT8.1 1/2”
OTT8.2OTT8.2 1/2”
OTT8.3OTT10.1
OTT10.1 1/4” OTT10.1 1/2”
OTT10.2OTT10.2 1/2”
OTT10.3
6-5/8” -7” x 1”6-5/8” -7” x 1-1/4”6-5/8” -7” x 1-1/2”
6-5/8” -7” x 2”8-5/8” x 1”
8-5/8” x 1-1/4”8-5/8” x 1-1/2”
8-5/8” x 2”8-5/8” x 2-1/2”
8-5/8” x 3”10-3/4” x 1”
10-3/4” x 1-1/4”10-3/4” x 1-1/2”
10-3/4” x 2”10-3/4” x 2-1/2”
10-3/4” x 3”
1”1”1”1”
1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”1-1/4”
24,00024,00024,00024,00026,00026,00026,00026,00026,00026,00030,00030,00030,00030,00030,00030,000
3.03.03.03.05.25.25.25.25.15.18.38.38.28.28.18.1
See separateprice list
OVER THE TOP ALUMINUM SANITARY WELL SEALSFeatures:• Cast Aluminum Alloy 319 — will not warp or crack• Three square head stainless steel cup point set screws• Seals have 1/2” vent hole as standard• Machined drop pipe seat with positive Buna-N-Seal
TOOL AND THREAD COMPOUNDS
Part Number Weight Per Can Standard Pkg. Quantity List Price Each
927650 12 oz. 12 cans See separate price list
BLACK FLAG™ WASP AND HORNET KILLERFeatures: • Powerful 15’ stream• Non-conductive• Kills on contact• EPA registered all 50 states
Part Number Pail Size Weight (Lbs.) List Price Each927730927735927740
1 gal.2 gal.5 gal.
102050
See separate price list
JET LUBE 21Features: • Recommended for drill collars, drill pipes, and threading operations• Can be used throughout drill string• Contains copper and graphite• Will not wash-out under severe conditions• Galling and seizing resistant
Part Number Pail Size Weight (Lbs.) List Price Each
927760 1 gal. 10 See separate price list
JET LUBE BULLSEYEFeatures:• Excellent thread compound for sensitive drilling situations• Non-metallic• Petroleum hydrocarbon free• Biodegradable, vegetable oil based
-
32 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
TOOL AND THREAD COMPOUNDS
TOOL & THREAD COMPOUNDS
Part Number Pail Size Weight (Lbs.) List Price Each
927770 3.5 gal. 35 See separate price list
JET LUBE Z-50Features:• Recommended for tool joints, collars and coring joints• 50% powdered metallic zinc• Contains H2S inhibitors• Brushable to 10°F
Part Number Standard Package Quanity Weight Per Can List Price Each
927790 12 12 oz. See separate price list
JET LUBE PITLESS ADAPTER LUBEFeatures:• USDA H-1 food grade anti seize technology• Antibacterial antifungal lubricant• Water resistant
Part Number Pail Size Weight (Lbs.) List Price Each
927765 1 gal. 10 See separate price list
ECO-SAFE™Features:• Non-metalic• Provides lubrication and protection to
500° F
• High temperature calcium complex base grease
• Resistant to water wash off• Especially effective for high pH muds
Part Number Pail Size Weight (Lbs.) List Price Each
927775 1 gal. 10 See separate price list
WELL-GUARD®Features:• High-performance thread compound• Petroleum hydrocarbon free product
• Designed for monitor well and environmentally sensitive drilling applications
• Brushable from -10° F to 400° F
Part Number Pieces Per Box Weight (Oz.) List Price Each
927780 12 8 See separate price list
#2 DOPE BRUSHFeatures:• 16” heavy wooden handle• 1-18” tapered
• Bristles designed for uniform compound applications
• Plastic hand guard
Part Number Quantity Weight (Oz.) List Price Each
927785 IND. 12 See separate price list
PLASTIC PAIL OPENERFeatures:• Lightweight aluminum design• Equipped with hammer face to re-attach lid• Opens 1, 2, 3 1/2 and 5 gallon plastic pail
JET LUBE KOPR KOTEFeatures:• Contains no lead or zinc• NSF registered No. 120923• Provides shield for metal to metal contact
• Recommended for thread connections• Maximum protection in demanding
environments• Provides lubrication and protection to 450°F
Part Number Brush Top Can Weight (lbs.) List Price Each927700 1/2
See separate price list927705 1
Part Number Pail Size Weight (lbs.) List Price Each927745 1 Gal. 11
See separate price list927750 2 Gal. 21927755 5 gal. 52
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 33
PRES
SURE
GAU
GES
PRESSURE GAUGES
Part Number
Diameter (Inches)
Pressure Range (PSI)
Pressure Connection (Ins.)
Approx. Weight (Lbs.) List Price Each
940069 2 0-100# 1/4 .4 See separate price list
Features:• Ametek• With steel case/brass stem, 1/8” orifi ce• Imported
Part Number
Diameter (Inches)
Pressure Range (PSI)
Pressure Connection (Ins.)
Approx. Weight (Lbs.) List Price Each
940070940068
22
0-100#0-200#
1/41/4
.4
.4See separate
price list
2” LIQUID FILLED BACK MOUNTED GAUGESFeatures:• Lead free (≤ 0.25% lead content)• Stainless steel case• Imported• Liquid fi lled to reduce vibrations• Brass stem
Part Number
Diameter (Inches)
Pressure Range (PSI)
Pressure Connection (Ins.)
Approx. Weight (Lbs.) List Price Each
940071940072
22
0-100#0-200#
1/41/4
.4
.4See separate
price list
BACK MOUNTED GAUGES
Part Number
Diameter (Inches)
Pressure Range (PSI)
Pressure Connection (Ins.)
Approx. Weight (Lbs.) List Price Each
940191940193
22
0-100#0-200#
1/41/4
.4
.4See separate
price list
2 1/2” LIQUID FILLED BACK MOUNTED GAUGESFeatures:• Lead free (≤ 0.25% lead content)• Stainless steel case• Liquid fi lled to reduce vibrations• Imported
Part Number
Diameter (Inches)
Pressure Range (PSI)
Pressure Connection (Ins.)
Approx. Weight (Lbs.) List Price Each
940073940074
2-1/22-1/2
0-100#0-200#
1/41/4
.45
.45See separate
price list
Features:• Midwest Lead free (≤ 0.25% lead content)• With steel case/brass stem, 1/8” orifi ce
2” LIQUID FILLED GAUGESFeatures:• Stainless steel case• Liquid fi lled to reduce vibrations• Lead free (≤ 0.25% lead content)• Brass stem• Imported
Part Number Model Number Diameter (Inches)Pressure
Range (PSI)Pressure
Connection (Ins.)Approx.
Weight (Lbs.)List Price
Each
940187940189
PGLF1002PGLF2002
22
0-100#0-200#
1/41/4
.4
.4See
separate price list
PRESSURE GAUGE LIQUID-FILLED MIDWEST - 2-1/2”Features:• Stainless steel case• Liquid fi lled to reduce vibrations• Lead free (≤ 0.25% lead content)• Brass stem• Imported
Part Number Model Number Diameter (Inches)Pressure
Range (PSI)Pressure
Connection (Ins.)Approx.
Weight (Lbs.)List Price
Each
640202640203
PHLF100PHLF200
2-1/2”2-1/2”
0-100#0-200#
1/41/4
.42
.42See
separate price list
-
34 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
PRESSURE GAUGES
PRESSURE GAUGES
LIQUID FILLED GAUGESFeatures:• Stainless steel case• Lead free (≤ 0.25% lead content)• Brass stem• USA Made
Part Number Model Number Diameter (Inches)Pressure
Range (PSI)Pressure
Connection (Ins.)Approx.
Weight (Lbs.)List Price
Each940204940206940208940210940212940214940216940218940220940222940224940226940228940230940232940234940236
PGL30PGL60
PGL100PGL160PGL200PGL300PGL400PGL600PGL1000
PGL60PGL100PGL160PGL200PGL300PGL400PGL600PGL1000
2-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/22-1/2
44444444
0-30#0-60#
0-100#0-160#0-200#0-300#0-400#0-600#
0-1000#0-60#
0-100#0-160#0-200#0-300#0-400#0-600#
0-1000#
1/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/41/4
.50
.50
.50
.50
.50
.50
.50
.50
.50
.501.901.901.901.901.901.901.90
See separate price list
• NOTE: Other size pressure gauges on request
2-1/2” LIQUID FILLED BACK MOUNTED GAUGESFeatures:• Lead free (≤ 0.25% lead content)• Brass stem• Stainless steel case• USA made
Part Number Model Number Diameter (Inches)Pressure
Range (PSI)Pressure
Connection (Ins.)Approx.
Weight (Lbs.)List Price
Each940255940256940257940259940260940261940263
PGL30PGL60
PGL100PGL200PGL300PGL400PGL1000
2-1/22-1/22-1/22-1/22-1/22-1/22-1/2
0-30#0-60#
0-100#0-200#0-300#0-400#
0-1000#
1/41/41/41/41/41/41/4
.50
.50
.50
.50
.50
.50
.50
See separate price list
2-1/2” LIQUID FILLED VACUUM GAUGESFeatures:• Stainless steel case• 1/4” bottom
Part Number Model Number Description List Price Each
940250 PGL-30 25.901 -30/+30 PSI See separate price list
4 1/2” WATER LEVEL GAUGEFeatures:• Used in conjuction with airline• Steel case• Adjustable dial to permit reading water level in feet• Phosphor bronze bourdon tube
CA566 Model Number Depth Range Connection (Inches)Approx. Weight
(Lbs.) List Price Each
940238 CA566 0-390 ft. 1/4 2.0 See separate price list
GAUGE PANEL MOUNTING CLAMPPart Number Description List Price Each
940242 Designed for back connecting gauges See separate price list
• NOTE: Other size pressure gauges on request
2” DRY GAUGE - BOTTOM MOUNT: MADE IN USAPart Number Description List Price Each
640160 0-100” See separate price list
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 35
ACCE
SSOR
IES
ACCESSORIESSQUARE D PRESSURE SWITCHES
Part Number Type
Pressure Range (PSI)
Description Pressure ConnectionApprox. Weight (Lbs.)
List Price Each
940024940032940026940133940134940135940023940054940028940055940130940034940025940030940031940029940136940137940138940139940140940141940022940056940057940058940059940039940041940040940042940045940046940047940048940043
FSG2FSG2FSG2
FSG2J2oMIFSG2J2oMIFSG2J2oMIFSG2MIPFSG2M4FSG2M4FSG2M4
FRG2FSG52J25FSG52J33
FSG2PFSG2PFSG2PFSW2FSW2FSW2GSWGSWGSW
Form PFSG-PC241
FYG2FYG2FYG2GSG2GSG2GSG2GSG2GHG2GHG2GHG2GHG2
GHG2R
20/4030/5040/6020/4030/5040/6030/5020/4030/5040/6050/3060/8050/7020/4030/5040/6020/4030/5040/6020/4030/5040/60
------
20/4030/5040/6020/4030/5040/6060/8030/5040/6060/8080/100100/80
Standard switchStandard switchStandard switchManual cut-offManual cut-offManual cut-off
Manual cut-off lever-P.PlugLow pressure cut-offLow pressure cut-offLow pressure cut-off
Reverse ActionHigher Cut In (max. 60 psi)Higher Cut In (max. 60 psi)
With Pulsation PlugWith Pulsation PlugWith Pulsation Plug
Corrosion Resistant NEMA3RCorrosion Resistant NEMA3RCorrosion Resistant NEMA3R
Heavy Duty Nema 4Heavy Duty Nema 4Heavy Duty Nema 4Nylon Pulsation Plug
Replacement Contact KitHigher HP. 80 PSIHigher HP. 80 PSIHigher HP. 80 PSI
Light Industrial-Air & WaterLight Industrial-Air & WaterLight Industrial-Air & WaterLight Industrial-Air & Water
Commercial Higher PressureCommercial Higher PressureCommercial Higher PressureCommercial Higher PressureReversing Higher Pressure
1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”
1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”1/4”
1.31.31.3222
1.51.51.51.51.31.31.31.31.31.3222
2.22.22.20.10.21.31.31.32222
2.22.22.22.22.2
See separate price list
• Lead Free: ≤ .025% Lead Content
SQUARE D FLOAT SWITCHES | Class 9036Part Number Type Description Approx. Weight
List Price Each
940142940143940146940147940148
DG2DG2RGG2
GG2RFG30
FloatFloatFloatFloatFloat
Close On Liquid RiseReversing Open On Liquid Rise
Close On Liquid RiseReversing Open On Liquid Rise
Close On Liquid Rise
22222
See separate price list
• Float not included
SQUARE D FLOAT SWITCHES | Class 9037
Part Number
Square D Part #
Float Positions from Front of Switch
Float Rod
Angle
Approx. Water Min.
Level Change
Max.Operations List Price Each
940060940062
9037HG339037HG34
RightLeft
4545
2”2”
5”5”
Close On Liquid RiseClose On Liquid Rise
See separate price list
• Note: • Other Square D switches, switch accessories, and pump safety switches available on request.• Float not included
SQUARE D GENERAL DUTY SAFETY SWITCHESPart
Number Type DescriptionPressure
ConnectionApprox. Weight
List Price Each
970001970002970005
D211N D211NRB
222N
Fusible GD 120/240V 30A 2P NEMA1 Fusible GD 120/240V 30A 2P NEMA3R Fusible GD 240V 60A 2P NEMA1
1/4”1/4”1/4”
.95 lbs.
.95 lbs.
.95 lbs.
See separate price list
-
36 www.maassmidwest.com | U.S. & CANADA 1-800-323-6259 | FAX 1-847-669-3230 |
ACCESSORIES
ACCESSORIES
MAASS MIDWEST PRESSURE SWITCHESFeatures:• CSA listed• UL listed
Part Number Type
Pressure Range (PSI)
Description Pressure ConnectionApprox. Weight (Lbs.)
List Price Each
940049940050940051
PS2PS2PS2
20/4030/5040/60
Standard switchStandard switchStandard switcH
1/4”1/4”1/4”
1.41.41.4
See separate price list
ALDERON MECHANICAL PUMP SWITCHESFeatures:• High amp rating eliminates 1/2 horsepower fl oat switches• Patented mechanicl design eliminates hazardous mecury• PVC fl oat housing• Heavy duty cable, 14 gauge, 2 conducter cable• Omni-directional, not sensitive to rotation or turbulance• Adjustable pumping range• UL Listed
Part Number Model Number Description Cord Length Voltage
List Price Each
969005969010969015969020969025
73687060730473727069
No plug, pump downNo plug, pump downPiggyback, pump up
No plug, pump upNo plug, pump up
10’15’10’10’15’
120/230VAC120/230VAC120/230VAC120/230VAC120/230VAC
See separate price list
ALDERON SIMPLEX CONTROL AND ALARM PANELSFeatures:• Big switch control panel utilizes a pump switch and a control fl oat activating
a high water alarm• Hand/off/auto• Alarm light• Alarm buzzer - auto reset• Green pump-run indicator light• NEMA 4X• UL Listed
Part Number Model Number Description List Price Each969030969035969040
717371857186
Single piggyback/8” to 22” pumping rangeDouble piggyback/2” to 60” pumping rangeDouble piggyback/2” to 60” pumping range
See separate price list
ALDERON 7001 TANK ALARM SYSTEMFeatures:• Flashing light and buzzer• Unique auto reset• Battery backup protection• Alarm auxiliary contact offers fl exibility to remote sources• Indicator lights/power and alarm status• UL and CSA listed
Part Number Model Number Description List Price Each965040 7001 Type 1 Enclosure, high level 15’ See separate price list
ALDERON 7004 TANK ALARM SYSTEMFeatures:• Automatic buzzer reset• REc polycarbonate beacon• 100db alarm buzzer• UL and CSA listed
Part Number Model Number Description List Price Each965045 7004 NEMA 4X, Indoor/Outdoor high level 15’ See separate price list
-
| FAX 1-847-669-3230 | U.S. & CANADA 1-800-323-6259 | www.maassmidwest.com 37
ACCE
SSOR
IES
ACCESSORIESHEAT SHRINK SPLICE KITS
These kits feature thick wall, self-sealing heat shrinkable tubing which provides quick,moisture-proof splicing in the fi eld. Kits are available in 2, 3 and 4 wire versions.
Features:• Professional grade• Splices made using standard wire crimping tool• Permanently fl exible sealant• Wide range of sealing capability - will cover a large diameter connection and still
effectively seal d