mae repor… · 2014 - 2015 outstanding teaching award. dr. x. du. global learning 2015 outstanding...

EMATHE DEPARTMENT OF MECHANICAL AND AEROSPACE ENGINEERING

2 0 15 A N N U A L S C H O L A R LY A C T I V I T Y R E P O R T

PROFESSIONAL RECOGNITIONDr. V. Birman, Certificate of Appreciation, The International Society for Optics and Photonics, Journal: Optical Engineering, March 2015.

Dr. V. Birman, Elsevier Certificate of Outstanding Contribution in Reviewing, Journal: Composites Part B, May 2015.

Dr. L. Duan, St. Louis Section of Aeronautics and Astronautics, Young Professional Engineer Award, 2015.

Dr. H. Pan., Oak Ridge University Ralph E. Powe Junior Faculty Enhancement Award, 2015.

Dr. J. Rovey, AIAA Associate Fellow, 2015.

Dr. J. Rovey, AIAA St. Louis Section Service Award, 2015.

Dr. X. Yang, 3M Non-Tenured Faculty Award, April 2015.

Dr. X. Yang, Elsevier Outstanding Review Award, 2015.

Dr. T. Yucelen, Oak Ridge University Ralph E. Powe Junior Faculty Enhancement Award, 2015.

Publication Recognition and AwardsDong, C., Leu, M. C. and Yin, Z., “American Sign Language Alphabet Recognition Using Microsoft KINECT,” Best Paper Award, IEEE Computer Society Workshop on Observing and Understanding Hands in Action (HANDS 2015), Boston, MA, June 12, 2015.

Yan, L., Chen, X., Li, W., Liou, F. and Newkirk, J., “Direct Laser Deposition of Ti-6Al-4V from Elemental Powder Blends,” Best Paper Award, 26th Solid Freeform Fabrication Symposium, Austin, TX, August 10 - 12, 2015.

CAMPUS RECOGNITION AND HONORS2015 Faculty Research Award

Dr. S. Hosder

Dr. X. Yang

2015 Faculty Teaching Award

Dr. D. Bristow

Dr. X. Du

2015 Achievement Award

Dr. R. Hutcheson

2014 - 2015 Outstanding Teaching Award

Dr. X. Du

Global Learning 2015 Outstanding Teaching Excellence Award

Dr. V. Birman

Dr. L. Dharani

Intelligent Systems Center - 2015 Distinguished Investigator Award

Dr. F. Liou

INTERNATIONAL AND NATIONAL STUDENT HONORS AND AWARDSThomas West (PhDAE), Advisor: Hosder, S., Internship, NASA Pathways at Vehicle Analysis Branch, NASA Langley Research Center, Hampton, VA, 2015.

Andrew Brune (PhDAE), Advisor: Hosder, S., Student Travel Scholarship to 12th International Planetary Probe Workshop, Cologne, Germany, June 15 - 19, 2015.

Paul Friz (PhDAE), Advisor: Rovey, J., Internship, NASA Pathways at Vehicle Analysis Branch, NASA Langley Research Center, Hampton, VA, 2015.

Benjamine Gruenwald (PhDAE) and Daniel Wagner (PhDAE), Advisor: Yucelen, T., Aerospace Systems, Summer Student Fellowship Program, Air Force Research Laboratory, Wright Patterson Air Force Base, Fort Walton, FL, June 2015.

John Daniel Peterson (PhDAE) and Dzung Tran (PhDAE), Advisor: Yucelen, T., AFRL/RW Munitions Directorate, Summer Student Fellowship Program, Air Force Research Laboratory, Eglin Air Force Base, Fort Walton, FL, June 2015. CAMPUS STUDENT HONORS AND AWARDSRobert Meinders (PhDAE), Advisor: Chandrashekhara, K., Chancellor’s Distinguished Fellowship, Fall 2015.

Zachary Gill (PhDAE), Advisor: Rovey, J., Chancellor’s Distinguished Fellowship, Fall 2015.

Leah Mason (PhDME), Advisor: Leu, M., Chancellor’s Distinguished Fellowship, Fall 2015.

Michelle Gegel (PhDME), Advisors: Bristow, D. and Landers, R. G., Chancellor’s Distinguished Fellowship, Fall 2015.

Therese Galbraith (BSME) and Yahya Abu-Hijleh (BSAE), Advisor: Duan, L., 2nd Place for “Micro Piezoelectric Windmill,” research proposal poster session, 11th Annual Undergraduate Research Conference, Missouri University of Science and Technology, April 15, 2015.

Wenbin Li (PhDME) and Amir Ghazanfari (PhDME), Advisor: Leu, M., 2nd Place for “A Novel Additive Manufacturing Process for Embedding Sensors into Ceramic Parts,” ISC Graduate Research Symposium, Missouri University of Science and Technology, April 27, 2015.

Warner Meeks (PhDAE), Advisor: Rovey, J., Honorable Mention, Chancellor’s Fellows Poster Competition, February 23, 2015.

Yiyu She (PhDME), Chen Chen (PhDME) and Yingqi Li (PhDME), 1st Place for “Mechanical Properties and Surface Finish Improvement for Metal Parts Fabricated by the Foil-Based AM Technologies,” 11th Annual Intelligent Systems Center poster presentation, Missouri University of Science and Technology, November 6, 2015.

Benjamin Gruenwald (PhDAE), Advisor: Yucelen, T., Teaching Award, Academy of Mechanical and Aerospace Engineers, Missouri University of Science and Technology, 2015.

Abdulaziz Abutunis (PhDME), Advisor: Chandrashekhara, K., Teaching Award, Academy of Mechanical and Aerospace Engineers, Missouri University of Science and Technology, 2015.

HONORS AND AWARDS

STUDENT HONORS AND AWARDS

1234561013

141515151720202122

Contents

Each semester the Mechanical and Aerospace Engineering department organizes seminars under the sponsorship of the Graduate Seminar Series and the Missouri S&T Academy of Mechanical and Aerospace Engineers (AMAE). One of the pur-poses of the seminar series is to broaden our students academi-cally and to aid in their professional development by providing another connection with the world of industry, business and research. These seminars consist of exceptional speakers whose research spans the range of the Mechanical and Aerospace Engi-neering disciplines. Through these seminars we seek to expose our faculty and graduate students to a scale of topics in areas both related to and complementary of those areas investigated in the department.

February 12, 2015 - Dr. Lan Jiang, Changjiang Distinguished Professor of Mechanical Engineering, Beijing Institute of Tech-nology, Beijing, People’s Republic of China

March 5, 2015 - Dr. Ulrich David Jentschura, Associate Professor of Physics, Missouri University of Science and Technology, Rolla, Missouri

April 23, 2015 - Dr. Rich Wlezien, Professor and Vance and Arlene Coffman Endowed Department Chair in Aerospace Engi-neering, Iowa State University, Ames, Iowa

April 30, 2015 - Dr. Silvia Ferrari, Professor of Engineering and Computer Science, Department of Mechanical and Materials Science, Duke University, Durham, North Carolina

May 7, 2015 - Dr. Meelan Choudhari, Aerospace Technologist, Computational AeroSciences Branch, NASA Langley Research Center, Hampton, Virginia

September, 10, 2015 - Dr. Matthew Maschmann, Assistant Pro-fessor, Department of Mechanical and Aerospace Engineering, University of Missouri, Columbia, Missouri

September 24, 2015 - Dr. Timothy S. Fisher, James G. Dwyer Professor in Mechanical Engineering, Purdue University, West Lafayette, Indiana

October 2, 2015 - Dr. Mohsen Asle Zaeem, Roberta and G. Robert Couch Assistant Professor, Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, Missouri

October 8, 2015 -Dr. Kevin Moore, Dean and Professor of the College of Engineering and Computational Science, Colorado School of Mines, Golden, Colorado

October 22, 2015 - Dr. Craig Friedrich, Robbins Professor of Sustainable Manufacturing, Michigan Technological University, Houghton, Michigan

November 12, 2015 - Dr. Caroline Hayes, Department Chair and Lynn Gleason Professor of Interdisciplinary Engineering, Iowa State University, Ames, Iowa

December 3, 2015 - Dr. Jordan Berg, Professor and Co-Director of Nano Tech Center, Texas Tech University, Lubbock, Texas

December 10, 2015 - Dr. Jerome Busemeyer, Provost Professor, Department of Psychological and Brain Sciences, Indiana Uni-versity, Bloomington, Indiana

GRADUATE SEMINAR SERIES

Honors and Awards........................................................................................Graduate Seminar Series............................................................................New Faculty........................................................................................................MAE: by the Numbers...................................................................................Facts and Figures............................................................................................Faculty.................................................................................................................. New Grants and Contracts.......................................................................... Other Active Grants.........................................................................Professional & Scholarly Activities Chairman, Co-Chairman of Technical Sessions and Conferences.......................................................................... Service on Committees of Professional Organizations.. Editors of Symposiums, Proceedings and Journals......... Journal Publications....................................................................... Refereed Conference Papers....................................................... Contributions to Books and Books Published.................... Invited Talks....................................................................................... Conference Presentations............................................................ MS Thesis and PhD Dissertations........................................

CONTENTS

2

LIANYI CHENAssistant Professor

PhD, Materials Science and EngineeringZhejiang University, 2009

BE, Metallurgical EngineeringYanshan University, 2004

RESEARCH INTERESTSMy research integrates manufacturing, metallurgy and nano-technology to explore new metal development and manufactur-ing paradigms to drive the performance and manufacturing of metals to a new level. I use the combination of experiments, theoretical analysis, and computer modeling/simulation to ac-celerate the implementation of new concepts and development of new materials and manufacturing processes. I use advanced characterization tools, particularly in situ synchrotron radiation based x-ray scattering/imaging and in situ scanning/transmis-sion electron microscopy, to investigate the microstructure, morphology and stress evolution of materials during processing or under loading, to establish the processing-structure-property relationships. My research program includes four thrust areas: metal nanomanufacturing, metal additive manufacturing, light-weight and novel metals, and in situ microstructure character-ization.

SELECT HONORS- First-Class Award of China Postdoctoral Science Funding, 2009- Fellowship for Outstanding PhD Dissertation, Zhejiang University, 2008

WARNER MEEKSAssistant Teaching Professor

PhD, Aerospace EngineeringMissouri University of Science and Technology, 2015

MS, Aerospace EngineeringMissouri University of Science and Technology, 2013

BS, Aerospace EngineeringMissouri University of Science and Technology, 2010

RESEARCH INTERESTS My research interests include how to teach creative problem solving and cultivate critical thinking skills to promote highly adaptable and successful engineers for the future. My gradu-ate studies focused on plasma physics and energy analysis of pulsed plasma systems with an emphasis in high power electric space propulsion applications.

SELECT HONORS - Honorable Mention, Chancellor’s Fellows Research Competi tion, 2014 and 2015- AMAE Student Excellence Award, 2010- Air Force Research Laboratory Space Scholar, 2009

JILLIAN SCHMIDTAssistant Teaching Professor

PhD, Materials Science and EngineeringUniversity of Minnesota, 2015

BS, Aerospace EngineeringUniversity of Minnesota, 2009

RESEARCH INTERESTSMy research interests include educational theory and imple-mentation of project-based and other active learning strategies in undergraduate courses, particularly within the introductory engineering curriculum. My graduate work focused on the design, development, and characterization of a new material for cardiovascular tissue replacement, and I am excited to share my experiences working on an interdisciplinary design team of en-gineers, scientists, and medical professionals with my students.

SELECT HONORS- Graduate Research Fellowship, National Science Foundation, 2009-2014- Outstanding Teaching Assistant Award, University of Minnesota, 2011-2012- Graduate School Fellowship, University of Minnesota, 2009- 2010

CHARLES S. WOJNARAssistant Professor

PhD, AeronauticsCalifornia Institute of Technology, 2015

MS, AeronauticsCalifornia Institute of Technology, 2011 BS, Aerospace EngineeirngUniversity of Illinois at Urbana-Champaign, 2010

RESEARCH INTERESTSI study the mechanical behavior of active materials, in particular piezoelectricity and ferroelectricity. I seek to understand how physi-cal processes on the microscale of the material influence its macro-scopic response through experiments and simulations. Structures incorporating active materials allow for their mechanical proper-ties such as stiffness and mechanical damping to be controlled. In addition, the overall shape of the structures can be changing by carefully controlling its active components. The ultimate goal is to create deformable and tunable structures for space applications, e.g. deformable mirrors for space telescopes and deployable structures. Thus I also study the behavior of these materials under the extreme conditions in space, in particular their stability and fatigue life.

SELECT HONORS- Donald Coles Prize, 2015- Charles Babcock Memorial Award, 2014

NEW FACULTY

Assistant Teaching Professor

PhD, Materials Science and EngineeringUniversity of Minnesota, 2015

BS, Aerospace EngineeringUniversity of Minnesota, 2009

24040

170

30

1718287717

5224

52

16280%2.180.750.92

0.44

* Fall 2015 enrollment records

Undergraduate student enrollment • Aerospace Engineering

• Mechanical Engineering B.S. degrees awarded per full-time T-TT faculty Starting salary

• Aerospace Engineering • Mechanical Engineering

872

224224

648

6.08

$60,967

$63,380

Graduate student enrollment • Aerospace Engineering

• Mechanical Engineering

• Manufacturing Engineering Thesis - Aerospace Engineering M.S. - Aerospace Engineering Ph.D. - Mechanical Engineering M.S. - Mechanical Engineering Ph.D. - Manufacturing Engineering M.S. Non-Thesis - Aerospace Engineering M.S. - Mechanical Engineering M.S. - Manufacturing Engineering M.E. Certificates

Quantitative GRE of graduate students Percentage of supported graduate research students GRA/GTA ratio based on FTE M.S. degrees (thesis) awarded per full-time T-TT faculty M.S. degrees (non-thesis) awarded per full-time T-TT facultyPh.D. degrees awarded per full-time T-TT faculty

Full time T-TT/NTT faculty Undergraduate to graduate student ratio Undergraduate student to full-time T-TT faculty ratio Ph.D. student to full-time T-TT faculty ratioJournal articles per full-time T-TT facultyExpenditures per full-time T-TT faculty Professional society fellows Minority and female faculty

36/43.6324.22.642.39

$115,734163

MAE: BY THE NUMBERSUNDERGRADUATE GRADUATE

GENERAL

4

20152011 2012 2013

10

20

30

40

50

60

Total Ph.D. EnrollmentMechanical Engineering

Aerospace Engineering

2014

100

200

300

400

700

500

600

20152011 2012 2013

Undergraduate Program EnrollmentMechanical Engineering

Aerospace Engineering

2014

70 800

FACTS AND FIGURES2015 RESEARCH FUNDING

ENROLLMENT GROWTH

19%NASA

21%INDUSTRY34%

NSF

8%OTHER

7%OTHER FEDERAL

7%UNIVERSITY OF

MISSOURI

4%DOE

OTHER FAST FACTS86 Journal Articles Published

98 Conference Papers Published

$6.2 M New Research Awards

2.86 Active Grants per T-TT Faculty

Education: Ph.D., Technion (Israel)

Research Interests: Composite material struc-tures, biomechanics, smart structures and materi-als, structural dynamics and vibration, buckling and dynamic stability

DR. VICTOR BIRMANPROFESSOR OF MECHANICAL ENGINEERING

DIRECTOR OF ENGINEERING EDUCATION CENTERFellow, ASME, 1996

Education: Ph.D., University of Texas at Austin

Research Interests: Guidance, stability, control and estimation, pattern recognition, stochastic processes, optimization, neural network applica-tions to control, numerical methods, design

DR. S. N. BALAKRISHNAN CURATORS’ PROFESSOR OF AEROSPACE ENGINEERING

Education: Ph.D., Virginia Polytechnic Institute and State University

Research Interests: Composite materials, smart structures, nanocomposites, biocomposites, struc-tural dynamics, finite element analysis, damage monitoring, composite manufacturing, experimen-tal characterization

DR. K. CHANDRASHEKHARACURATORS’ PROFESSOR OF

MECHANICAL AND AEROSPACE ENGINEERINGFellow, ASME, 2002

Education: Ph.D., University of Illinois at Urbana-Champaign

Research Interests: Dynamic modeling and control of micro- and nano-positioning systems, atomic force microscopes and additive manufacturing systems; volumetric error compensation; iterative learning control, multi-dimensional control and signal processing

DR. DOUGLAS A. BRISTOWASSOCIATE PROFESSOR OF

MECHANICAL ENGINEERING

GRADUATE PROGRAM DEGREES AWARDEDCertificate Programs

CAD/CAM and Rapid Product Realization

Composite Materials and Structures

Energy Conversion and Transport

Engineering Mechanics

Manufacturing Automation

Manufacturing Systems

Control Systems

On-Campus

Distance

Mechanical Engineering

Master of Science

Thesis

Non-thesis

Doctor of Philosophy

Manufacturing Engineering Master of Engineering

Master of Science

Aerospace Engineering Master of Science

Thesis

Non-thesis

Doctor of Philosophy

5 15105 1510

On-Campus

Distance

UNDERGRADUATE PROGRAM DEGREES AWARDEDAerospace Engineering

Bachelor of Science

Mechanical EngineeringBachelor of Science

10 7050 60403020 1009080 160150140130120110 170 180 190 200 210 220

FACTS AND FIGURES

FACULTY

20

6

Education: Ph.D., University of Illinois at Chicago

Research Interests: Design optimization, multidisciplinary optimization design, probabilistic/statistical methods, system/structural reliability, robust design, kinematics, mechanism synthesis, petroleum machinery

DR. XIAOPING DUPROFESSOR OF


Education: Ph.D., Purdue University

Research Interests: Multidimensional radiative heat transfer, laser processing of materials, radiative heat transfer in combustion processes, microscale heat transfer, biomedical optics, interaction of radiation with conduction and convection, multiple scattering and polarization of laser beams, solutions of integral equations, numerical heat transfer

DR. AL CROSBIECURATORS’ PROFESSOR OF

MECHANICAL ENGINEERING Fellow, ASME, 1987Fellow, AIAA, 1988Fellow, AAAS, 1999


Research Interests: Combustion, laser based diagnostics for sprays and combustion, optical measurement systems, fuel injection, internal combustion engines

DR. JAMES A. DRALLMEIERCURATORS’ TEACHING PROFESSOR OF

MECHANICAL ENGINEERINGDEPARTMENT CHAIR

Education: Ph.D., Clemson University

Research Interests: Aircraft structures, fracture mechanics, fatigue and failure analysis, micro mechanics, composite materials and structures, process modeling of ceramic matrix composites, friction and wear of composites, fracture of laminated glazing

DR. LOKESWARAPPA R. DHARANICURATORS’ PROFESSOR OF MECHANICAL

AND AEROSPACE ENGINEERINGAssociate Fellow, AIAA, 1995

Fellow, ASME, 2000

Education: Ph.D., University of Texas at Austin

Research Interests: Stochastic estimation and control theory; information theory; nonlinear uncertainty propagation and rectification; autonomous guidance, navigation, and control of aerospace vehicles; orbit determination, data association, conjunction assessment, and collision avoidance; attitude dynamics, determina-tion, and control; autonomous sensor manage-ment; high-fidelity dynamical and observational modeling

DR. KYLE DEMARSASSISTANT PROFESSOR OF AEROSPACE ENGINEERING

Education: Ph.D., Zhejiang University

Research Interests: Additive manufacturing, nano-manufacturing, smart manufacturing, solidification processing, laser materials processing, metal matrix nanocomposites, metallic glasses, materi-als for energy efficiency, materials for additive manufacturing, mechanical behavior of materials, and synchrotron radiation based x-ray scattering/imaging

DR. LIANYI CHENASSISTANT PROFESSOR OF



Research Interests: Fluid dynamics, heat transfer, and thermodynamics of energy systems, heat and mass transfer in buoyant flows, second-law and exergy analysis, numerical simulation of transport phenomena and experimental methods

DR. KELLY HOMANASSOCIATE PROFESSOR OF


Education: Ph.D., Columbia University

Research Interests: Nanophotonics devices based on silicon photonics, plasmonics and metamateri-als; light-matter interactions in photonic nano-structures; optical sensing; quantum dots; quan-tum optics and quantum information processing; solar energy harvesting; light emitting devices

DR. JIE GAOASSISTANT PROFESSOR OF


Education: Ph.D., Princeton University

Research Interests: Direct numerical simulation and large eddy simulation, high-speed transitional and turbulent flows, chemically reacting flows, laminar flow control and turbulent drag reduction, and large-scale, high performance computing

DR. LIAN DUANASSISTANT PROFESSOR OF AEROSPACE ENGINEERING

FACULTY


Research Interests: Computational fluid dynamics (CFD), aerodynamics, micro/nano flows, sto-chastic CFD, uncertainty and error quantification in computational simulations, multidisciplinary design and optimization, robust design, numerical methods

DR. SERHAT HOSDERASSOCIATE PROFESSOR OF AEROSPACE ENGINEERING

Education: Ph.D., Texas A&M University-College Station

Research Interests: Design theory and method-ology, design of complex systems, behavioral modeling of complex systems, design of hybrid powertrain systems, engineering software development, graphical simulations of engineer-ing systems

DR. RYAN S. HUTCHESONASSOCIATE TEACHING PROFESSOR OF



Research Interests: Fluid dynamics, aero-structure interaction and control, intelligent aircraft, active flow control, unmanned air vehicles, electrochemical magnetohydrodynamics-based microfluidics and CFD simulations of transport phenomena

DR. KAKKATTUKUZHY M. ISAACPROFESSOR OF AEROSPACE ENGINEERING

ASSOCIATE CHAIR FOR AEROSPACE ENGINEERING

Education: Ph.D., Columbia University

Research Interests: Bioinspired and biointegrated devices and materials for healthcare, flexible and stretchable epidermal sensors, transient electron-ics, implantable multichannel affinity sensing devices, biochips for body fluid analysis

DR. XIAN HUANGASSISTANT PROFESSOR OF


Education: Ph.D., New Mexico University

Research Interests: Nonlinear dynamics and vibrations, study of deterministic and random dynamical systems, model order reduction, theoretical modeling and numerical computation, structural dynamics

DR. NISHANT KUMAR ASSISTANT TEACHING PROFESSOR OF


Education: Ph.D., University of Michigan at Ann Arbor

Research Interests: Combustion, air pollutants, alternative fuels, fuel cells, hydrogen tech-nologies, radiative transfer, flame diagnostics, nanoparticle characterization, fire safety, thermal/fluid engineering

DR. UMIT O. KOYLUPROFESSOR OF MECHANICAL ENGINEERING


Research Interests: Infrared/optical antennas applied to energy transport, sensing, and manu-facturing, metamaterials/frequency selective surfaces for engineering radiation properties, near-field radiation heat transfer, direct energy conversion and energy harvesting and laser based micro/nanomanufacturing including electronics packaging

DR. EDWARD C. KINZELASSISTANT PROFESSOR OF


Education: Ph.D., University of Minnesota at Twin Cities

Research Interests: CAD/CAM, rapid prototyping, rapid manufacturing, fuel cell manufacturing

DR. FUEWEN (FRANK) LIOUMICHAEL AND JOYCE BYTNAR PRODUCT

INNOVATION AND CREATIVITY PROFESSOR OF MECHANICAL ENGINEERINGDIRECTOR OF MANUFACTURING

ENGINEERING PROGRAM

Fellow, ASME, 2008

Education: Ph.D., University of California at Berkeley

Research Interests: Rapid prototyping, intelligent manufacturing, virtual reality, CAD/CAM, robotics, mechatronics and automatic control

DR. MING C. LEUKEITH AND PAT BAILEY DISTINGUISHED

PROFESSOR OF MECHANICAL ENGINEERINGDIRECTOR OF INTELLIGENT SYSTEMS CENTER (ISC)

DIRECTOR OF CENTER FOR AEROSPACE MANUFACTURING TECHNOLOGIES (CAMT)

Fellow, ASME, 1993Fellow, International Academy of

Production Engineering (CIRP), 2008

DR. ROBERT G. LANDERSPROFESSOR OF MECHANICAL ENGINEERINGASSOCIATE CHAIR FOR GRADUATE AFFAIRS

Fellow, ASME, 2014

Education: Ph.D., University of Michigan at Ann Arbor

Research Interests: Manufacturing, systems, and control; modeling, analysis, monitoring, and control of manufacturing processes; metal cutting; laser metal deposition; freeze extrusion fabrica-tion; friction stir processing; electro–hydraulics; analysis and control of alternative energy systems; digital control applications


Research Interests: Finite elasticity, viscoelasticity, liquid crystal hydrodynamics, solid and continuum mechanics

DR. GEAROID MACSITHIGHASSOCIATE PROFESSOR OF MECHANICAL

AND AEROSPACE ENGINEERING

FACULTY

8

Education: Ph.D., Michigan Technological University

Research Interests: Manufacturing including intelli-gent machining, high speed machining, machine tool dynamics and metrology, metal forming, sensors and signal processing, computer numerical control, virtual manufacturing, and neural network applica-tions; smart structures including structural health monitoring, aging aircraft, damage assessment and repair of metallic and composite structures, non-destructive evaluation, and proton exchange membrane (hydrogen) fuel cells

DR. ANTHONY OKAFORPROFESSOR OF MECHANICAL ENGINEERING


Research Interests: Astrodynamics, orbital mechanics, spacecraft design, spacecraft mission design, satellite attitude dynamics, nonlinear analy-sis, dynamics and control, optimization

DR. HENRY (HANK) PERNICKAASSOCIATE PROFESSOR OF AEROSPACE ENGINEERING

Education: Ph.D., University of Texas at Arlington

Research Interests: Kinematics, mechanical design, synthesis of mechanisms

DR. J. KEITH NISBETTASSOCIATE PROFESSOR OF

MECHANICAL ENGINEERING ASSOCIATE CHAIR FOR MECHANICAL ENGINEERING


Research Interests: Mechanical design, rigid-body and compliant mechanism design, high-perfor-mance machinery analysis and design, machine vibration and stability

DR. ASHOK MIDHAPROFESSOR OF MECHANICAL ENGINEERING

DIRECTOR OF THE PRODUCT INNOVATION AND CREATIVITY CENTER

Fellow, ASME, 2003


Research Interests: Additive manufacturing, electronics and photonics manufacturing, thermal/laser assisted manufacturing, laser annealing and crystallization, high-throughput and low cost micro/nano-manufacturing, solution processing of nanomaterials, molecular dynamics simula-tion, transport phenomena in nanomanufacturing processes

DR. HENG PANASSISTANT PROFESSOR OF



Research Interests: Fluid dynamics, computational fluid dynamics, hypersonic propulsion systems, computational analysis of jet mixing, flow losses and mixing enhancement in combustors, aircraft gas turbine ramjet propulsion systems, scramjet performance

DR. DAVID W. RIGGINSCURATORS’ TEACHING PROFESSOR

OF AEROSPACE ENGINEERINGDIRECTOR, NASA-MISSOURI SPACE GRANT

CONSORTIUM

Education: Ph.D., University of Michigan

Research Interests: Plasma aerospace appli-cations, advanced space propulsion, plasma aerodynamics and flow control, plasma-enhanced combustion, applications to energy systems, hypersonics/re-entry body plasma interactions, plasma physics, rarefied gas dynamics

DR. JOSHUA L. ROVEYASSOCIATE PROFESSOR OF AEROSPACE ENGINEERING

Associate Fellow, AIAA, 2014

Education: Ph.D., University of Michigan - Ann Arbor

Research Interests: Advanced li-ion battery, beyond li-ion battery, energy storage systems, renewable energy systems, grid energy storage systems, nano-/macro-mechanics of materials, self-assembly of nanoparticles, nanostructures, multiphysics/multiscale experiment and simula-tions

DR. JONGHYUN PARKASSISTANT PROFESSOR OF


Education: Ph.D., Missouri University of Science and Technology

Research Interests: Effective teaching of critical thinking and multidimensional problem solving, meta-cognition, innovative engine design, innova-tive sustainable spacecraft design, solar physics

DR. WARNER MEEKSASSISTANT TEACHING PROFESSOR OF

MECHANICAL AND AEROSPACE ENGINEERING

Education: Ph.D., University of Minnesota

Research Interests: Design theory, materials and structures, educational research

DR. JILLIAN SCHMIDTASSISTANT TEACHING PROFESSOR OF


FACULTY


Research Interests: Fluid dynamics, micro/nano-scale heat and mass transport, interfacial phenomena, micro/nanofluidics, bioMEMS, lab-on-a-chip, micro/nano-fabrication, bubble dynamics, droplet dynamics, acoustics, acoustic streaming, electrohydrodynamics, electrokinetics, and multi-phase flow

DR. CHENG WANGASSISTANT PROFESSOR OF



Research Interests: Ultrashort laser pulse-material interaction, laser micromachining for micro-sensors and micro-devices, gas metal arc welding, laser welding and hybrid welding, Ab Initio MD model-ing, multiscale modeling

DR. HAI-LUNG TSAIPROFESSOR OF MECHANICAL ENGINEERING

Fellow, ASME, 2009 Education: Ph.D., Columbia University

Research Interests: Optical materials and devices in nanophotonics and plasmonics; physics and applications of optical meta-materials; nanoscale optomechanics, optical nanoelectromechanical systems (NEMS); integrated optofluidic devices and optical sensors; photon management for solar/thermal energy harvesting; optical device micro-/nano-fabrication

DR. XIAODONG YANGASSISTANT PROFESSOR OF


Education: Ph.D., Georgia Institute of Technology

Research Interests: Robust and adaptive control of safety-critical systems; resilient autonomous vehicles and robotics; distributed estimation and control of large-scale systems; collective motion and networked multiagent systems; biologically- inspired control and learning; smart modular systems

DR. TANSEL YUCELENASSISTANT PROFESSOR OF


Balakrishnan, S.

Yucelen, T. (60%) and Balakrishnan, S. (40%), NASA Goddard Space Flight Center, “Learning Algorithms for Preserving Safe Flight Envelope,” $716,538, September 1, 2015 - August 31, 2018.

Yucelen, T. (60%) and Balakrishnan, S. (40%), Wichita State University, “Active Wing Shaping Control of Morphing Aircraft,” $270,000, August 1, 2015 - July 31, 2018.

Balakrishnan, S. (100%), Indiana University, “Applications of Quantum Decision Theory to Target Assignments,” $55,374, September 30, 2015 - September 29, 2016.

Bristow, D.

Landers, R. G. (50%) and Bristow, D. (50%), Toyota USA Foundation, “Volumetric Error Compensation of a Deburring Robot,” $18,643, January 16 - December 31, 2015.

Bristow, D. (50%) and Landers, R. G. (50%), Boeing, “CAMT: Volumetric Error Compensation,” $40,000, January 1 - December 31, 2015.

Landers, R. G. (40%), Bristow, D. (5%), Hilmas, G. (5%), Kinzel, E. (10%), Leu, M. (5%), Liou, F. (5%), Newkirk, J. (5%), Pan, H. (10%), Huang, X. (10%) and Sheng, H. (5%), National Science Foundation, “REU Site: Additive Manufacturing,” $415,000, April 1, 2015 - March 31, 2018.

Bristow, D. (50%) and Landers, R. G. (50%), GKN Aerospace Services, “CAMT: Volumetric Error Compensation,” $10,000, January 1 - December 31, 2015.

Leu, M. (25%), Newkirk, J. (20%), O’Malley, R. (5%), Bristow, D. (9%), Kinzel, E. (12%), Landers, R. G. (9%) and Liou, F. (20%), Honeywell Federal Manufacturing and Technologies, LLC, “Metal Additive Manufacturing Materials Analysis for the Missouri University of Science and Technology,” $344,423, May 7 - September 13, 2015.

Landers, R. G. (50%) and Bristow, D. (50%), Herzan, “Development of a Vibration Isolation System,” $70,186, June 1, 2014 - December 31, 2015.

Kinzel, E. (50%), Bristow, D. (25%) and Landers, R. G. (25%), National Science Foundation, “GOALI: Additive Manufacturing of Glass Based Gradient Index Optics,” $300,000, August 1, 2015 - July 31, 2018.

Bristow, D. (20%), DeMars, K. (7%), Kinzel, E. (7%), Landers, R. G. (15%), Leu, M. (7%), Pan, H. (7%), Park, J. (7%), Pernicka, H. (7%), Rovey, J. (16%) and Duan, L. (7%), US Department of Education, “GAANN: Doctoral Research and Training in Mechatronics,” $295,278, September 1, 2015 - August 31, 2016.

Chandrashekhara, K.

Leu, M. (50%) and Chandrashekhara, K. (50%), GKN Aerospace Services, “CAMT: Investigation of Sparse-Build ULTEM 1010 Mold For Autoclave Processing,” $5,000, January 1 - December 31, 2015.

Leu, M. (50%) and Chandrashekhara, K. (50%), Boeing, “CAMT: Investigation of Sparse-Build ULTEM 1010 Mold for Autoclave Processing,” $60,000, January 1 - December 31, 2015.

Chandrashekhara, K. (34%), Lekakh, S. (33%) and Van Aken, D. (33%), Kent D. Peaslee Steel Manufacturing Research Center, “Peaslee-SMRC: Hot Working Modeling and Simulation of Highly Alloyed Steels,” $90,000, July 1, 2015 - June 30, 2016.

Chandrashekhara, K. (100%), Boeing, “CAMT: Evaluation and Testing of High Temperature Composite,” $15,000, January 1 - December 31, 2015.

Chandrashekhara, K. (45%) and Nam, P. (55%), Missouri Soybean Merchandising Council, “Energy Efficient Building Panels with Insulation Core of Soy-Based Polyurethane Foams,” $30,000, April 1, 2015 - March 31, 2016.

Chandrashekhara, K. (100%), Technical Data Analysis, Inc., “Novel Multi-Scale/Multi-Physics Integrated Tool for the Prediction of Manufacturing-Induced Defects in Autoclave Composite Airframe Parts,” $32,000, July 27, 2015 - January 15, 2016.

Chen, L.

Chen, L. (100%), University of Missouri Research Board, “Observing Defects Formation in Selective Laser Melting,” $58,183, January 4 - December 4, 2016.

NEW GRANTS AND CONTRACTS

FACULTYEducation: Ph.D., Purdue University

Research Interests: Dynamics, vibrations, model-ing and development of piezoactuators and transducers-mechatronics, embedded systems and control

DR. DANIEL S. STUTTSASSOCIATE PROFESSOR OF

MECHANICAL ENGINEERINGEducation: Ph.D., California Institute of Technology

Research Interests: Aerospace structures, active ma-terials, mechanics of materials, continuum mechan-ics, micromechanics, manufacturing, experimental and computational solid mechanics

DR. CHARLES S. WOJNARASSISTANT PROFESSOR OF AEROSPACE ENGINEERING

10

DeMars, K.

DeMars, K. (100%), Applied Technology Associates, “Trajectory Reconstruction Algorithms for Consistent Event Registration,” $40,000, January 2 - July 21, 2015.

DeMars, K. (100%), NASA Johnson Space Center, “Numerical Methods in Estimation and Navigation,” $10,000, May 17 - September 30, 2015.

DeMars, K. (100%), NASA Johnson Space Center, “Fundamentals of Estimation,” $10,000, May 17 - September 30, 2015.

DeMars, K. (100%), NASA Johnson Space Center, “Orbit Determination,” $10,000, May 17 - September 30, 2015.


Rovey, J. (30%), Pernicka, H. (30%), DeMars, K. (20%) and Kimball, J. (20%), Utah State University, “Multi-Mode MicroPropulsion CubeSat Technology Demonstration Mission,” $3,400, December 16, 2015 - December 31, 2016.

Drallmeier, J.

Midha, A. (75%) and Drallmeier, J. (25%), Par-Way Tryson, “The Design and Development of a New Manual Trigger Sprayer for Dispensing Vegetable Oil from a Bottle,” $155,690, August 1, 2015 - September 30, 2016.

Duan, L.

Duan, L. (100%), National Institute of Aerospace, “IRAD: Higher-Order RANS Turbulence Models for Separated Flow Prediction,” $43,215, February 6 - September 30, 2015.

Duan, L. (100%), Air Force Office of Scientific Research, “Numerical Simulation of Freestream Acoustic Disturbances in Hypersonic Ground Facilities and Their Effect on Boundary Layer Transition,” $134,869, July 1, 2015 - June 30, 2016.


Hosder, S.

Hosder, S. (100%), National Aeronautics and Space Administration, “Uncertainty Quantification Applied to the Analysis and Design of Hypersonic Inflatable Atmospheric Decelerators for Spacecraft,” supplement, June 18, 2014, $68,934, August 1, 2013 - July 31, 2017.

Huang, X.

Huang, X. (100%), University of Missouri Research Board, “A Motion-Actuated Epidermal Drug Delivery System,” $62,773, June 1, 2015 - May 31, 2016.

Huang, X. (100%), University of Missouri System Interdisciplinary Intercampus Research Program, “An Impedance Self-Adaptive Skin-Complaint RF Power Scavenger For Mobile Healthcare and Human-Machine Interface,” $81,000, August 1, 2015 - July 31, 2016.

Kinzel, E.


Leu, M. (25%), Newkirk, J. (20%), O’Malley, R. (5%), Bristow, D. (9%), Kinzel, E. (12%), Landers, R. G. (9%) and Liou, F. (20%), Honeywell Federal Manufacturing and Technologies, LLC, “Metal Additive Manufacturing Materials Analysis for Missouri University of Science and Technology,” $344,423, May 7 - September 13, 2015.

Kinzel, E. (100%), University of Missouri System Interdisciplinary Intercampus Research Program, “Metasurface Enabled Advanced Microbolometer Architecture for Infrared Sensing and Fundamental Thermal Transport Investigation,” $80,000, August 1, 2015 - July 31, 2016.


Pan, H. (15%), Switzer, J. (40%), Hor, Y. (15%), Kinzel, E. (15%) and Nath, M. (15%), National Science Foundation, “MRI: Acquisition of an Electron-Beam Lithography System for Nanofabrication and Nanoscience,” $840,000, September 1, 2015 - August 31, 2017.

Kinzel, E. (100%), National Science Foundation, “Metasurface Enabled Uncooled Silicon Germanium Oxide (SixGeyO1-x-y) Microbolometers for Multispectral Infrared Imaging,” $129,508, September 15, 2015 - August 31, 2018.

Bristow, D. (20%), DeMars, K. (7%), Kinzel, E. (7%), Landers, R. G. (15%), Leu, M. (7%), Pan, H. (7%), Park, J. (7%), Pernicka, H. (7%) and Rovey, J. (16%) and Duan, L. (7%), US Department of Education, “GAANN: Doctoral Research and Training in Mechatronics,” $295,278, September 1, 2015 - August 31, 2016.

Koylu, U.

Koylu, U. (100%), National Science Foundation, “Bio-Inspired Flow Field Designs for PEM Fuel Cells,” $50,000, July 1, 2015 - March 31, 2016.

Landers, R. G.

Landers, R. G. (50%) and Bristow, D. (50%), Toyota USA Foundation, “Volumetric Error Compensation of a Deburring Robot,” $18,643, January 16 - December 31, 2015.


Bristow, D. (50%) and Landers, R. G. (50%), Boeing, “CAMT: Volumetric Error Compensation,” $40,000, January 1 - December 31, 2015.

Bristow, D. (50%) and Landers, R. G. (50%), GKN Aerospace Services, “CAMT: Volumetric Error Compensation,” $10,000, January 1 - December 31, 2015.

Leu, M. (25%), Newkirk, J. (20%), O’Malley, R. (5%), Bristow, D. (9%), Kinzel, E. (12%), Landers, R. G. (9%) and Liou, F. (20%), Honeywell Federal Manufacturing

and Technologies, LLC, “Metal Additive Manufacturing Materials Analysis for the Missouri University of Science and Technology,” $344,423, May 7 - September 13, 2015.

Landers, R. G. (50%) and Bristow, D. (50%), Herzan, “Development of a Vibration Isolation System,” $70,186, June 1, 2014 - December 31, 2015.

Park, J. (50%) and Landers, R. G. (50%), National Science Foundation, “Battery Health Dynamics and Its Management,” $412,559, September 1, 2015 - August 31, 2018.



Leu, M.

Leu, M. (50%) and Chandrashekhara, K. (50%), GKN Aerospace Services, “CAMT: Investigation of Sparse-Build ULTEM 1010 Mold For Autoclave Processing,” $5,000, January 1 - December 31, 2015.

Leu, M. (100%), Boeing, “CAMT IC Gold Membership Boeing,” continuation, $200,000, January 1 - December 31, 2015.

Leu, M. (50%) and Chandrashekhara, K. (50%), Boeing, “CAMT: Investigation of Sparse-Build ULTEM 1010 Mold for Autoclave Processing,” $60,000, January 1 - December 31, 2015.

Landers, R. G. (40%), Bristow, D. (5%), Hilmas, G. (5%), Kinzel, E. (10%), Leu, M. (5%), Liou, F. (5%), Newkirk, J. (5%), Pan, H. (10%), Huang, X. (10%), and Sheng, H. (5%), National Science Foundation, “REU Site: Additive Manufacturing,” $415,000, April 1, 2015 - March 31, 2018.


Leu, M. (100%), Spirit Aerosystem, Inc., “CAMT: Spirit Membership,” $50,000, May 11, 2015 - May 10, 2016.

Tsai, H. (60%) and Leu, M. (40%), Department of Energy, “Additive Manufacturing of Smart Parts with Embedded Sensors for In-Situ Monitoring in Advanced Energy Systems,” $250,00, October 1, 2013 – September 30, 2016.

Leu, M. (100%), Bodine Aluminum, Inc., “CAMT: Bodine Aluminum, Inc. Membership,” $50,000, October 9, 2015 - January 8, 2017.

Leu, M. (100%), Cummins, “CAMT: Cummins Membership,” $15,000, October 9, 2015 - October 8, 2016.


Leu, M. (50%) and Cheng, M. (50%), University of Arkansas, “EAGER: Cybermanufacturing: Architecture and Protocols for Scalable Cyber-Physical Manufacturing System,” $172,933, September 1, 2015 - August 31, 2017.

Liou, F.


Liou, F. (100%), GKN Aerospace Services, “CAMT: Robotic Repair with Additive and Subtractive Processes,” $25,000, January 1 - December 31, 2015.

Liou, F. (50%) and Newkirk, J. (50%), Boeing, “CAMT: Direct Metal Deposition of SS316 and Ti64 Functionally Gradient Materials,” $40,000, January 1 - December 31, 2015.


Liou, F. (100%), National Science Foundation, “EAGER/Cybermanufacturing: Cyber-Enabled Additive Manufacturing of Advanced Materials,” $146,758, September 1, 2015 - August 31, 2017.

Liou, F. (60%) and Sarangapani, J. (40%), National Science Foundation, “EAGER: Cybermanufacturing: Cyber-Enabled Additive Manufacturing of Advanced Materials,” $5,000, September 1, 2015 - August 31, 2017.

Midha, A.

Midha, A. (75%) and Drallmeier, J. (25%), Par-Way Tryson, “The Design and Development of a New Manual Trigger Sprayer for Dispensing Vegetable Oil From a Bottle,” $155,690, August 1, 2015 - September 30, 2016.

Midha, A. (100%), Missouri Department of Economic Development, “The Design and Development of a New Manual Trigger Sprayer for Dispensing Vegetable Oil From a Bottle,” $28,000, August 1 - October 31, 2015.

Pan, H.

Pan, H. (100%), National Science Foundation, “Collaborative Research: Battery Electrode Fabrication Through Innovative Powder-Based Additive Manufacturing,” $149,999, April 1, 2015 - March 31, 2018.


Pan, H. (100%), Oak Ridge Associated Universities, “Innovative Thermal Processing through Physical and Thermal Nano-Confinements,” $5,000, June 1, 2015 - May 31, 2016.

Pan, H. (15%), Switzer, J. (40%), Hor, Y. (15%), Kinzel, E. (15%) and Nath, M. (15%), National Science Foundation, “MRI: Acquisition of an Electron-Beam Lithography System for Nanofabrication and

Nanoscience,” $840,000, September 1, 2015 - August 31, 2017.


Park, J.

Park, J. (100%), University of Missouri Research Board, “Failure Mechanisms of Interface Layers in Batteries,” $44,793, June 1, 2015 - May 31, 2016.

Park, J. (50%) and Landers, R. G. (50%), National Science Foundation, “Battery Health Dynamics and Its Management,” $412,559, September 1, 2015 - August 31, 2018.

Park, J. (50%) and Liang, X. (50%), National Science Foundation, “Mechanical/Chemical Failure of Solid Electrolyte Interphase In Lithium-ion Batteries: Understanding Its Mechanisms and Suppressing Its Onset,” $99,586, September 1, 2015 - August 31, 2016.


Pernicka, H.

Rovey, J. (50%) and Pernicka, H. (50%), University of Missouri System Interdisciplinary Intercampus Research Program, “Multi-mode Rocket for CubeSats,” $50,000, August 1, 2015 - July 31, 2016.

Pernicka, H. (80%) and Rovey, J. (20%), Air Force Office of Scientific Research, “Development of a Validation of a Stereoscopic Imager and a Micropropulsion System for Use in Spacecraft Close Proximity Operations,” $110,000, September 14, 2015 - September 14, 2016.

Pernicka, H. (100%), M4 Engineering, Inc., “Multi-mode Rocket for CubeSats,” $37,500, June 17, 2015 - June 17, 2016.



Riggins, D.

Riggins, D. (100%), NASA Goddard Space Flight Center, “Missouri Space Grant Consortium,” $307,000, May 1, 2015 - April 30, 2016.

Riggins, D. (100%), NASA Goddard Space Flight Center, “Learning Algorithms for Preserving Safe Flight Envelope,” $33,399, September 15, 2015 - August 31, 2018.

Riggins, D. (100%), NASA Goddard Space Flight Center, “Experimental Program to Stimulate Competitive Research (EPSCoR) - Research Infrastructure Development,” $125,000, May 6, 2015 - May 5, 2016.

Rovey, J.

Rovey, J. (100%), Digital Solid State Propulsion, LLC, “Plasma Plume Characterization of Solid Electric Propellant Thrusters,” $24,999, January 12 - May 29, 2015.

Rovey, J. (50%) and Pernicka, H. (50%), University of Missouri System Interdisciplinary Intercampus Research Program, “Multi-mode Rocket for CubeSats,” $50,000, August 1, 2015 - July 31, 2016.

Rovey, J. (100%), NASA Goddard Space Flight Center, “Characterization of a Green Solid Electric Microthruster for Small Spacecraft,” $64,628, August 1, 2015 - July 31, 2016.

Rovey, J. (100%), NASA Marshall Space Flight Center, “Multi-Mode MicroPropullson for Small Spacecraft,” $60,000, September 1, 2015 - August 31, 2016.

Pernicka, H. (80%) and Rovey, J. (20%), Air Force Office of Scientific Research, “Development of a Validation of a Steroscopic Imager and a Micropropulsion System for Use in Spacecraft Close Proximity Operations,” $110,000, September 14, 2015 - September 14, 2016.

Rovey, J. (100%), Digital Solid State Propulsion, LLC, “Plasma Plume Characterization of GEM Thrusters,” $35,000, September 1 - December 31, 2015.



Stutts, D.

Pommerenke, D. (47%), Khilkevich, V. (48%) and Stutts, D. (5%), Huawei Technologies Company, “Development of a Passive Intermodulation Measurement System,” $90,000, August 4, 2015 - August 3, 2016.

Tsai, H.

Tsai, H. (50%) and Brow, R. (50%), Eagle Picher Industries, Inc., “Laser Seals for Electrochemical Devices,” $20,000, Feburary 23, - June 23, 2015.

Tsai, H. (100%), University of Missouri Research Board, “3D Printing for Amorphous Metal Structures,” $41,672, January 1 - December 31, 2016.

Tsai, H. (60%) and Leu, M. (40%), Department of Energy, “Additive Manufacturing of Smart Parts with Embedded Sensors for In-Situ Monitoring in Advanced Energy Systems,” $250,000, October 1, 2013 – September 30, 2016.

Wang, C.

Wang, C. (100%), University of Missouri Research Board, “Microbubble Acoustofluidics in Viscoelastic Fluids,” $50,267, July 1, 2015 - June 30, 2016.

Yang, X.

Yang, X. (100%), 3M, “Controlling The Flow of Light With Metamaterial Nanostructures,” $15,000, June 1, 2015 - May 31, 2019.

12

Yang, X. (100%), Army Research Office, “Enhancement of Light Trapping and Optical Absorption in Complex ZnO Nanostructures,” $50,000, September 1, 2015 - May 31, 2016.

Yucelen, T.

Yucelen, T. (100%), Oak Ridge Associated University, “Autonomous Multivehicle Systems for Real-Time Situational Awareness in Adverse Environments,” $5000, June 1, 2015 - May 31, 2016.

Yucelen, T. (60%) and Balakrishnan, S. N. (40%), NASA Goddard Space Flight Center, “Learning Algorithms for Preserving Safe Flight Envelope,” $716,538, September 1, 2015 - August 31, 2018.

Yucelen, T. (100%), Universal Technology Corporation, “Verification and Validation of Adaptive Systems for Hypersonic Vehicles,” $24,999, August 17 - December 31, 2015.

Yucelen, T. (60%) and Balakrishnan, S. (40%), Wichita State University, “Active Wing Shaping Control of Morphing Aircraft,” $270,000, August 1, 2015 - July 31, 2018.

Bristow, D.

Bristow, D. (50%), Landers, R. G. (40%) and Liou, F. (10%), National Science Foundation, “Iterative Process Control of Laser Metal Deposition,” $272,875, June 1, 2013 - May 31, 2016.

Landers, R. G. (50%) and Bristow, D. (50%), National Science Foundation, “GOALI: Volumetric Error Analysis for Machine Tools,” $300,000, August 1, 2013 - July 31, 2016.

Landers, R. G. (30%), Bristow, D. (10%), Chandrashekhara, K. (10%), Leu, M. (20%), Liou, F. (10%), Newkirk, J. (10%) and Rahaman, M. (10%), US Department of Education, “Doctoral Research and Training in Direct Digital Manufacturing,” amendment, August 7, 2013, $134,172, August 16, 2013 - August 15, 2015.

Landers, R. G. (50%) and Bristow, D. (50%), National Science Foundation, “GOALI: Volumetric Error Analysis for Machine Tools,” amendment, May 12, 2014, $5,000, August 1, 2013 - July 31, 2016.

Chandrashekhara, K.

Chandrashekhara, K. (100%), Office of Naval Research, “Harvesting Hydrokinetic Energy from Vortex Induced Vibrations,” $93,000, March 1, 2012 - February 28, 2015.


Chandrashekhara, K. (34%), Lekakh, S. (33%) and Van Aken, D. (33%), Kent D. Peaslee Steel Manufacturing Research Center, “PSMRC: Hot Working Modeling and Simulation of Highly Alloyed Steels,” $95,000, July 1, 2014 - June 30, 2015.

DeMars, K.

DeMars, K. (100%), Air Force Research Laboratory, “External Aiding Methods for IMU-Based Navigation,” $100,000, August 27, 2014 - August 26, 2016.

DeMars, K. (100%), Applied Technology Associates, “Quantification of Uncertainty for Advanced Dead Reckoning Algorithms,” $49,000, October 28, 2014 - July 10, 2015.

Drallmeier, J.

Daughton, W. (10%), Dow Jr, B. (20%), Drallmeier, J. (10%), Dunn Norman, S. (10%), Erickson, K. (10%), Hofer, V. (20%), Hurson, A. (10%) and Schonberg, W. (10%), Gulf University for Science and Technology, “Collaboration in Development of Programs in the New GUST College of Engineering,” $295,290, August 28, 2008 - December 31, 2015.

Drallmeier, J. (100%), Kawasaki Motors Manufacturing Corporation, “Small Engine Heat Transfer,” $205,860, November 15, 2014 - November 14, 2016.

Du, X.

Du, X. (100%), National Science Foundation, “Reliability-Based Multidisciplinary Systems Design Under Time-Dependent Uncertainty,” $260,366, September 1, 2012 - August 31, 2015.

Du, X. (100%), National Science Foundation, “Reliability-Based Multidisciplinary Systems Design Under Time-Dependent Uncertainty,” supplement, February 19, 2013, $3,960, September 1, 2012 - August 31, 2015.

Du, X. (100%), National Science Foundation, “Reliability-Based Multidisciplinary Systems Design Under Time-Dependent Uncertainty,” supplement, February 19, 2013, $5,999, September 1, 2012 - August 31, 2015.

Du, X. (70%) and Takai, S. (30%), National Science Foundation Undergraduate Education, “Engineering Uncertainty Repository,” $199,879, June 15, 2013 - May 31, 2016.

Du, X. (100%), National Science Foundation, “Quantitative Reliability Prediction in Early Design Stages,” $190,265, August 1, 2013 - July 31, 2016.

Du, X. (100%), National Science Foundation, “Reliability-Based Multidisciplinary Systems Design Under Time-Dependent Uncertainty,” amendment, April 16, 2014, $13,960, September 1, 2012 - August 31, 2015.

Duan, L.

Duan, L. (100%), Air Force Office of Scientific Research, “Numerical Simulation of Freestream Acoustic Disturbances in Hypersonic Ground Facilities and Their Effect on Boundary Layer Transition,” $125,029, July 1, 2014 - June 30, 2015.

Duan, L. (100%), University of Missouri Research Board, “Energy Harvesting and Flow Control Using Piezo-Riblets,” $33,878, August 12, 2014 - August 11, 2015.

Finaish, F.

Finaish, F. (100%), NASA Goddard Space Flight Center, “NASA - Missouri Space Grant Consortium,” $825,660, May 1, 2010 - April 30, 2015.

Finaish, F. (100%), NASA Goodard Space Flight Center, “Missouri Space Grant Consortium,” annual supplement, October 11, 2011, $328,000, May 1, 2010 - April 30, 2015.

Finaish, F. (100%), NASA Goddard Space Flight Center, “NASA - Missouri Space Grant Consortium,”

supplement, April 18, 2012, $185,000, May 1, 2010 - April 20, 2015.

Finaish, F. (100%), NASA Goddard Space Flight Center, “2012 NASA EPSCoR,” $100,000, October 18, 2012 - October 17, 2015.

Finaish, F. (100%), NASA Goddard Space Flight Center, “NASA - Missouri Space Grant Consortium,” supplement, January 3, 2013, $316,000, May 1, 2010 - April 30, 2015.

Finaish, F. (10%), Liou, F. (65%) and Newkirk, J. (25%), NASA Goddard Space Flight Center, “Fabrications of Advance Materials for Space Applications,” $750,000, September 1, 2013 - August 31, 2016.

Gao, J.

Yang, X. (50%) and Gao, J. (50%), National Science Foundation, “Infrared Perfect Absorbers and Thermal Emitters with Tunable Bandwidth Based on Metamaterial,” $304,912, June 15, 2014 - May 31, 2017.

Gao, J. (100%), Oak Ridge Associated University, “Spontaneous Emission Engineering with Optical Metamaterials,” $5,000, June 1, 2014 - May 31, 2015.

Hosder, S.

Hosder, S. (100%), NASA Goddard Space Flight Center, “Uncertainty Quantification Applied to the Analysis and Design of Hypersonic Inflatable Atmospheric Decelerators for Spacecraft Re-entry,” amendment, June 1, 2014, $65,917, June 4, 2014, August 1, 2013 - July 31, 2017.

Hosder, S. (100%), NASA Glenn Research Center, “Development of Turbulence Models, Uncertainty Quantifcation and Optimization Tools for Aircraft and Turbomachinery Analysis and Design,” $211,764, October 1, 2014 - September 30, 2017.

Isaac, K.

Isaac, K. (100%), National Science Foundation, “Collaborative Research: Actively Controllable Microfluidics with Filmed-Confined Redox-Magnetohydrodynamics: Experiment and Simulation,” $165,395, September 1, 2013 - August 31, 2016.

Kinzel, E.

Kinzel, E. (50%) and Donnell Hilgedick, K. (50%), American Society Nondestructive Test, “Evaluation of Glass-Fiber Reinforced Polymer Composites Using Frequency Selective Surfaces,” $20,000, August 1, 2014 - July 31, 2015.

Landers, R. G.


Landers, R. G. (50%) and Bristow, D. (50%) National Science Foundation, “GOALI: Volumetric Error Analysis for Machine Tools,” $300,000, August 1, 2013 - July 31, 2016.


OTHER ACTIVE GRANTS

Birman, V.

Track Co-Organizer and Co-Chair, Symposium, Track 5-10: Applications - Bio & Medical, 20th International Conference on Composite Materials, Copenhagen, Denmark, July 20 - 24, 2015.

Session Chair, “Applications – Bio and Medical 2,” 20th International Conference on Composite Materials, Copenhagen, Denmark, July 20 - 24, 2015.

Session Co-Chair, “Multifunctional and Micro/Nano Structured Materials (II),” ASME 2015 International Mechanical Engineering Congress & Exposition, Houston, TX, November 13 - 19, 2015.

DeMars, K.

Session Chair, 25th AAS/AIAA Space Flight Mechanics Meeting, Williamsburg, VA, January 11 - 15, 2015.

Session Chair, 2015 AAS/AIAA Astrodynamics Specialist Conference, Vail, CO, July 2015.

Session Organizer and Chair, Space Object Detection, Tracking, Identification, and Classification, 18th International Conference on Information Fusion, Washington, DC, July 2015.

Duan, L.

Session Chair, 53rd AIAA Aerospace Sciences and Technology Forum and Exposition (SciTech 2015), Kissimmee, FL, January 5 - 9, 2015.

Hosder, S.

Chair, “Hypersonic Fundamentals VI,” 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, Glasgow, Scotland, July 6 - 9,2015.

Co-Chair, “Hypersonic Fundamentals I,” 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, Glasgow, Scotland, July 6 - 9, 2015.

Kinzel, E.

Session Co-Chair, “Numerical Modeling of Optical/IR Antennas and Metamaterials,” ACES (Applied Computational Electromagnetics Society) 2015 Conference, Williamsburg, VA, March 22 - 26, 2015.

Leu, M.

Session Chair, “Modeling I: CAD/CAE,” 26th Solid Freeform Fabrication Symposium, Austin, TX, August 10 - 12, 2015.

Liou, F.

Session Chair, “Materials VII: Copper, Silicon, Nickel,” 26th Solid Freeform Fabrication Symposium, Austin, TX, August 10 - 12, 2015.

Mac Sithigh, G.

Chair, Keynote Lecture Session, 53rd Meeting of the Society for Natural Philosophy, Calgary, Canada, August 19 - 21, 2015.

Landers, R. G. (50%) and Bristow, D. (50%), National Science Foundation, “GOALI: Volumetric Error Analysis for Machine Tools,” amendment, May 12, 2014, $5,000, August 1, 2013 - July 31, 2016.

Leu, M.


Leu, M. (100%), University of Missouri System Interdisciplinary Intercampus Research Program, “Healing Chronic Bone Infection Using Bioactive Glass,” $20,000, August, 1, 2014 - July 31, 2015.

Leu, M. (100%), Automated Precision International, “CAMT: Program Support APR,” $10,000, August 1, 2014 - July 31, 2015.

Leu, M. (100%), Department of Energy, “Additive Manfacturing of Smart Parts with Embedded Sensors for In-Situ Monitoring in Advance Energy Systems,” continuation, September 5, 2014, $90,042, October 1, 2013 - September 30, 2015.

Leu, M. (20%), Long, S. (30%), Smith, B. (25%) and Konur, D. (25%), Missouri Department of Transportation, “Work Zone Simulator Analysis: Driver Performance and Acceptance of Alternate Merge Sign Configuration,” $120,237, October 1, 2014 - June 15, 2016.

Liou, F.


Landers, R. G. (30%), Bristow, D. (10%), Chandrashekhara, K. (10%), Leu, M. (20%), Liou, F. (10%), Newkirk, J. (10%), and Rahaman, M. (10%), US Department of Education, “Doctoral Research and Training in Direct Digital Manufacturing,” amendment, August 7, 2013, $134,172, August 16, 2013 - August 15, 2015.

Finaish, F. (10%), Liou, F. (65%) and Newkirk, J. (25%), NASA Goddard Space Flight Center, “Fabrications of Advance Materials for Space Applications,” $750,000, September 1, 2013 - August 31, 2016.

Pan, H.

Pan, H. (100%), National Science Foundation, “Collaborative Research: Directed Templating of Semiconductor Nanocrystals Through Laser Melting,” $110,000, July 1, 2014 - June 30, 2017.

Pan, H. (100%), University of Missouri Interdisciplinary Intercampus Research Program, “Innovative Thermal Processing of Nanomaterials in response to DOE Sunshot Initatives,” $49,468, August 1, 2014 - August 1, 2015.

Pan, H. (100%), University of Missouri Research Board, “A Low Cost and Scalable Nanomanufacturing System,” $44,526, September 1, 2014 - August 1, 2015.

Park, J.

Park, J. (100%), Materials Research Center at Missouri S&T, “Characterization of Degradation Mechanisms in Ge/Li2S Battery System,” $12,000, October 14, 2014 - June 14, 2015.

Pernicka, H.

Pernicka, H. (100%), NASA EPSCoR, “Expanded Collaboration of the M-SAT Team with JPL, ARL and NSF,” $25,000, October 18, 2012 - October 17, 2015.

Pernicka, H. (100%), Air Force Office of Scientific Research, “Development and Validation of a Stereoscopic Imager and a Micropropulsion System for Use in Spacecraft Close Proximity Operations,” continuation, September 9, 2014, $55,000, September 15, 2014 - September 14, 2015.

Riggins, D.

Riggins, D. (100%), NASA Goddard Space Flight Center, “FY 2010 NASA Training Grant Announcement / National Space Grant College and Fellowship Program (Space Grant) 2010-2014,” continuation, July 29, 2014, $319,450, May 1, 2010 - April 30, 2015.

Riggins, D. (100%), NASA Glenn Research Center, “Development of Turbulence Models, Uncertainty Quantification and Optimization Tools for Aircraft and Turbomachinery Analysis and Design,” $538,236, November 1, 2014 - September 30, 2017.

Riggins, D. (100%), NASA Goddard Space Flight Center, “2012, 2013 and 2014 NASA ESPSCoR,” amendment, October 21, 2014, $31,200, October 18, 2012 - October 17, 2015.

Rovey, J.

Rovey, J. (50%) and Yang, X. (50%), Air Force Research Lab, “Plasmonic Space Propulsion,” $157,395, August 15, 2014 - August 14, 2017.

Tsai, H.

Tsai, H. (100%), Department of Energy, “Additive Manfacturing of Smart Parts with Embedded Sensors for In-Situ Monitoring in Advanced Energy Systems,” continuation, September 15, 2014, $392,101, October 1, 2013 - September 30, 2015.

Yang, X.

Yang, X. (100%), Seagate Technologies LLC, “Thermo-Plasmonics in Engineered Metallic Nanostructures: Nanoscale Focusing of Light and Heat,” $70,932, June 3, 2014 - June 3, 2015.

Rovey, J. (50%) and Yang, X. (50%), Air Force Research Laboratory, “Plasmonic Space Propulsion,” $157,395, August 15, 2014 - August 14, 2017.

Yang, X. (100%), University of Missouri Interdisciplinary Intercampus Research Program, “High-Efficiency Solar Hydrogen Production and High-Capacity Hydrogen Storage Enhanced by Nanostructured Materials,” $50,000, August 1, 2014 - July 31, 2015.

Yucelen, T.

Yucelen, T. (100%), University of Missouri Research Board, “Resilient Multiagent Control in Adverse Environments,” $43,733, June 1, 2014 - May 31, 2015.

PROFESSIONAL & SCHOLARLY ACTIVITIESCHAIRMAN, CO-CHAIRMAN OF TECHNICAL SESSIONS AND SYMPOSIUMS

14

Park, J.

Symposium Chair, ASME 2015 Applied Mechanics and Materials Conference, June 29 - July 1, 2015.

Co-Chair, ASME 2015 International Mechanical Engineering Congress & Exposition, Houston, TX, November 13 - 19, 2015.

Yucelen, T.

Chair, “Multi-Vehicle Control and Adaptive Control of Flight Vehicles,” AIAA Guidance, Navigation, and Control Conference (SciTech 2015), Kissimmee, FL, January 5 - 9, 2015.

Session Chair, “Networked Control Systems II and Uncertain Systems,” 2015 American Control Conference, Chicago, IL, July 1 - 3, 2015.

Birman, V.

Scientific Committee, 10th International Conference on Composite Science and Technology, Lisbon, Portugal, September 2 - 5, 2015.

Scientific Committee, International Conference on Shells, Plates and Beams, University of Bologna, Bologna, Italy, September 16 - 18, 2015.

ASME 2015 International Mechanical Engineering Congress and Exposition, ASME Aerospace Division Structures and Materials Committee, Houston, TX, November 16, 2015.

ASME 2015 International Mechanical Engineering Congress and Exposition, Congress Steering Committee, 2015.

Aerospace Structures and Materials Technical Committee, Executive Committee of the ASME Aerospace Division, 2015.

ASME Applied Mechanics Division, Composite Materials Committee, 2015.

DeMars, K.

AIAA Astrodynamics Technical Committee, August 2015.

AIAA Astrodynamics Technical Committee, December 2015.

Du, X.

Reviewer and Co-Coordinator, 2015 ASME DETC Conference.

Duan, L.

Mini-Symposium Organizer, “Modeling and Simulation of Turbulence/Hydrodynamics,” 1st Annual Meeting of SIAM Central States Section, Rolla, MO, April 11 - 12, 2015.

AIAA Fluid Dynamics Technical Committee, May 2015.

Gao, J.

OSA Foundation Grants Review Committee, 2015.

Hosder, S.

AIAA Non-Deterministic Approaches Technical Committee Meeting, (SciTech 2015), Kissimmee, FL, January 5 - 9, 2015.

AIAA Hypersonic Technologies and Aerospace Planes (HyTASP) Program Committee Meeting (SciTech 2015), Kissimmee, FL, January 5 - 9, 2015.

AIAA Hypersonic Technologies and Aerospace Planes (HyTASP) Program Committee, Best Paper Award Selection Sub-Committee Member, March 2015.

Chair, AIAA Hypersonic Technologies and Space Planes (HyTASP) Committee Membership Subcommittee, 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, Glasgow, Scotland, July 6 - 9, 2015.

Isaac, K.

Member, AIAA Terrestrial Energy Systems Technical Committee

Landers, R. G.

Secretary, ASME Dynamic Systems and Control Division, 2015.

Leu, M.

Associate Chair, North American Manufacturing Research Institution (NAMRI) Scientific Committee, Society of Manufacturing Engineers (SME), 2014 - 2015.

Co-Organizer, Additive Manufacturing Track, 43rd SME North American Manufacturing Research Conference (NAMRC 43), Charlotte, NC, June 8 - 10, 2015.

Representative, Technical Advisory Committee, Digital Manufacturing and Design Innovation Institute (DMDII), June 30, 2015.

Member, Scientific Committee, Second CIRP Conference on Biomanufacturing (CIRP-BioM 2015), University of Manchester, Manchester, United Kingdom, July 29 - 31, 2015.

Liou, F.

Member, Executive Advisory Committee, ASME Advanced Design & Manufacturing Impact Forum, AM3D, Boston, MA, August 2 - 5, 2015.

Mac Sithigh, G.

Arrangements Committee, Society for Natural Philosophy, Calgary, Canada, August 19 - 21, 2015.

Organizing Committee, Annual SIAM Central States Section Meeting, December 2015.

Rovey, J.

Organizer, Propulsion and Energy 2016 Kickoff Meeting, Electric Propulsion Technical Area, 51st Joint Propulsion Conference, Monterey, CA, July 27 - 29, 2015.

Secretary, Electric Propulsion Technical Committee, 51st Joint Propulsion Conference, Monterey, CA, July 27 - 29, 2015.

Electric Propulsion Technical Area Organizer, AIAA Propulsion and Energy 2016.

Birman, V.

Associate Editor, Composites Theory and Practice, Polish Society for Composite Materials

Associate Editor, Composites Part B: Engineering

Editorial Board, Journal of Sandwich Structures and Materials

Editorial Board, Journal of Thermal Stresses

Associate Editor, Editorial Board, International Journal of Aeronautical and Space Sciences (IJASS), Korean Society for Aeronautical and Space Sciences

Bristow, D.

Associate Editor, American Controls Conference, 2015

Associate Editor, ASME 2015 Dynamic Systems and Control Conference

Associate Editor, ASME Journal of Dynamic Systems, Measurement, and Control

Associate Editor, Mechatronics

Crosbie, A.

Associate Editor, Journal of Quantitative Spectroscopy & Radiative Transfer

Du, X.

Guest Editor, Artificial Intelligence for Engineering Design, Analysis and Manufacturing

Review Editor, Structural and Multidisciplinary Optimization

Associate Editor, ASME Journal of Mechanical Design

Landers, R. G.

Associate Editor, Journal of the Korean Society of Manufacturing Technology Engineers

Yucelen, T.

Associate Editor, International Conference on Unmanned Aircraft Systems, Denver, CO, June 9 - 12, 2015

Associate Editor, SIAM Papers, American Control Conference, Chicago, IL, July 1 - 3, 2015

Associate Editor, AIAA Papers, American Control Conference, Chicago, Il, July 1 - 3, 2015

Balakrishnan, S.

Heydari, A. and Balakrishnan, S. N., “Optimal Switching Between Controlled Subsystems with Free Mode Sequence,” Neurocomputing, Vol. 149, Part C, pp. 1620 - 1630, February 3, 2015.

Heydari, A. and Balakrishnan, S. N., “Closed-Form Solution to Finite-Horizon Suboptimal control of Nonlinear Systems,” International Journal of Robust and Nonlinear Control, Vol. 25, pp. 2687 - 2704, October 2015.

Birman, V.

Birman, V., “Nonlocal Effect on Stiffness of a Collagen Molecule,” Journal of Applied Mechanics, Vol. 82, pp. 034502-1 - 034502-3, March 2015.

Hu, Y., Birman, V., Demyier-Black, A., Schwartz, A., Thomopoulos, S. and Genin, G. M., “Stochastic Interdigitation as a Toughening Mechanism at the Interface Between Tendon and Bone,” Biophysical Journal, Vol. 108, pp. 431 - 437, April 21, 2015.

Mohamed, M., Anandan, S., Huo, Z., Birman, V., Volz, J. and Chandrashekhara, K., “Manufacturing and Characterization of Polyurethane Based Sandwich Composite Structures,” Composite Structures, Vol. 123, pp. 169 - 179, May 2015.

Tuwair, H., Hopkins, M., Volz, J., ElGawady, M. A., Mohamed, M., Chandrashekhara, K. and Birman, V., “Evaluation of Sandwich Panels with Various Polyurethane Foam-Cores and Ribs,” Composites Part B, Vol. 79, pp. 262 - 276, September 15, 2015.

Saadat, F., Birman, V., Thomopoulos, S. and Genin, G. M., “Effective Elastic Properties of a Composite Containing Multiple Types of Anisotropic Ellipsoidal Inclusions, with the Application to the Attachment of Tendon to Bone,” Journal of the Mechanics and Physics of Solids, Vol. 82, pp. 367 - 377, September 2015.

Linderman, S. W., Kormpakis, I., Gelberman, R. H., Birman, V., Wegst, U. G. K., Genin, G. M. and Thomopoulos, S., “Shear Lag Sutures: Improved Suture Repair Through the Use of Adhesives,” Acta Biomaterialia, Vol. 23, pp. 229 - 239, September 1, 2015.

Chandrashekhara, K.

Huo, Z., Bheemreddy, V., Chandrashekhara, K. and Brack, R. A., “Modeling of Concentration Dependent Moisture Diffusion in Hybrid Fiber-Reinforced Polymer Composites,” Journal of Composite Materials, Vol. 39, No. 3, pp. 321 - 333, January 16, 2015.

Mohamed, M., Anandan, S., Huo, Z., Birman, V., Volz, J. and Chandrashekhara, K., “Manufacturing and Characterization of Polyurethane Based Sandwich Composite Structures,” Composite Structures, Vol. 123, pp. 169 - 179, May 2015.

SERVICE ON COMMITTEES OF PROFESSIONAL ORGANIZATIONS

EDITORS OF SYMPOSIUMS PROCEEDINGS AND JOURNALS

JOURNAL PUBLICATIONS

Li, H. and Chandrashekhara, K., “Particle Swarm-Based Structural Optimization of Laminated Composite Hydrokinetic Turbine Blades,” Engineering Optimization, Vol. 47, No. 9, pp. 1191 - 1207, June 2015.

Li, H., Taylor, G., Bheemreddy, V., Iyibilgin, O., Leu, M. and Chandrashekhara, K., “Modeling and Characterization of Fused Deposition Modeling Tooling for Vacuum Assisted Resin Transfer Molding Process,” Additive Manufacturing, Vol. 7, pp. 64 - 72, July 2015.

Tuwair, H., Hopkins, M., Volz, J., ElGawady, M., Mohamed, M., Chandrashekhara, K. and Birman, V., “Evaluation of Sandwich Panels with Various Polyurethane Foam-Cores and Ribs,” Composites Part B, Vol. 79, pp. 262 - 276, September 15, 2015.

Mohamed, M., Hawkins, S. and Chandrashekhara, K., “Manufacturing and Performance Evaluation of Polyurethane Composites Using One-Part and Two-Part Resin Systems,” Polymers & Polymer Composites, Vol. 23, No. 5, pp. 333 - 344, 2015.

Li, H., Chen, J., Chandrashekhara, K., Xu, M., Lekakh, S. N. and Richards, V. L., “Characterization and Modeling of Anisotropic SL Pattern During Investment Casting Process,” International Journal of Advanced Manufacturing Technology, Vol. 80, pp. 1933 - 1943, November 2015.

Mohamed, M., Vuppalapati, R. R., Bheemreddy, V., Chandrashekhara, K. and Schuman, T., “Characterization of Polyurethane Composites Manufactured Using Vacuum Assisted Resin Transfer Molding,” Advanced Composite Materials, Vol. 24, pp. 13 - 31, December 2015.

Chen, L.

Chen, L. Y., Xu, J. Q., Choi, H., Pozuelo, M., Ma, X. L., Bhowmick, S., Yang, J. M., Mathaudhu, S. and Li, X.C., “Processing and Properties of Magnesium Containing a Dense Uniform Dispersion of Nanoparticles,” Nature, Vol. 528, pp. 539 - 543, December 2015.

DeMars, K.

DeMars, K. J., Hussein, I. I., Frueh, C., Jah, M. K. and Erwin, R. S., “Multiple-Object Space Surveillance Tracking Using Finite-Set Statistics,” Journal of Guidance, Control, and Dynamics, Vol. 38, No. 9, pp. 1741 – 1756, September 2015.

DeMars, K. J. and Bishop, R. H., “Projecting High-Dimensional Parametric Uncertainties for Improved State Estimation Error Confidence,” Journal of Guidance, Control, and Dynamics, Vol. 38, No. 9, pp. 1659 – 1672, September 2015.

LeGrand, K. A., DeMars, K. J. and Pernicka, H. J., “Bearings-Only Initial Relative Orbit Determination,” Journal of Guidance, Control, and Dynamics, Vol. 38, No. 9, pp. 1699 – 1713, September 2015.

Drallmeier, J.

Massey, J. A. and Drallmeier, J. A., “Identification of the Dominant Combustion Characteristics on Homogeneous Charge Compression Ignition Engine Noise,” International Journal of Engine Research, Vol. 16, No. 4, pp. 518 - 530, June 2015.

Du, X.

Hu, Z. and Du, X., “First Order Reliability Method for Time-Variant Problems Using Series Expansions,” Structural and Multidisciplinary Optimization, Vol. 51, pp. 1 - 21, January 2015.

Hu, Z. and Du, X., “Mixed Efficient Global Optimization for Time-Dependent Reliability Analysis,” Journal of Mechanical Design, Vol. 137, pp. 051401-1 - 051401-9, May 2015.

Zhuang, X., Pan, R. and Du, X.,”Enhancing Product Robustness in Reliability-Based Design Optimization,” Reliability Engineering and System Safety, Vol. 138, pp. 145 – 153, June 2015.

Xie, S., Pan, B. and Du, X., “A Single-Loop Optimization Method for Reliability Analysis with Second Order Uncertainty,” Engineering Optimization, Vol. 47, pp. 1125 - 1139, October 2015.

Zhang, J. F. and Du, X., “Time-Dependent Reliability Analysis for Function Generation Mechanisms with Random Joint Clearances,” Mechanism and Machine Theory, Vol. 92, pp. 184 - 199, October 2015.

Hu, Z. and Du, X., “A Random Field Approach to Reliability Analysis with Random and Interval Variables,” ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B. Mechanical Engineering, Vol. 1, pp. 041005-1 - 041005-11, December 2015.

Gao, J.

Sun, L., Yang, X., Wang, W. and Gao, J., “Diffraction-Free Optical Beam Propagation with Near-Zero Phase Variation in Extremely Anisotropic Metamaterials,” Journal of Optics, Vol. 17, pp. 1 - 7, February 2, 2015.

Sun, L., Li, Z., Luk, T., Yang, X. and Gao, J., “Nonlocal Effective Medium Analysis in Symmetric Metal-Dielectric Multilayer Metamaterials,” Physical Review B, Vol. 91, pp. 195147-1 - 19547-9, May 27, 2015.

Cheng, F., Gao, J., Stan, L., Rosenmann, D., Czaplewski, D. and Yang, X., “Aluminum Plasmonic Metamaterials for Structural Color Printing,” Optics Express, Vol. 23, No. 11, pp. 14552 - 14560, May 26, 2015.

Deng, H., Li, Z., Stan, L., Rosenmann, D., Czaplewski, D., Gao, J. and Yang, X., “Broadband Perfect Absorber Based on One Ultrathin Layer of Refractory Metal,” Optics Letters, Vol. 40, No. 11, pp. 2592 - 2595, May 28, 2015.

Geng, T., Zhuang, S., Gao, J. and Yang, X., “Nonlocal Effective Medium Approximation for Metallic Nanorod Metamaterials,” Physical Review B, Vol. 91, No. 24, pp. 245128-1 - 245128-7, June 12, 2015.

Cheng, F., Gao, J., Luk, T. and Yang, X., “Structural Color Printing Based on Plasmonic Metasurfaces of Perfect Light Absorption,” Nature: Scientific Reports, Vol. 5, Article No. 14327, June 5, 2015.

Zeng, J., Gao, J., Luk, T. S., Litchinitser, N. M. and Yang, X., “Structuring Light by Concentric-Ring Patterned Magnetic Metamaterial Cavities,” Nano Letters, Vol. 15, pp. 5363 - 5368, July 2015.

Cheng, F., Yang, X. and Gao, J., “Ultrasensitive Detection and Characterization of Molecules with Infrared Plasmonic Metamaterials,” Nature: Scientific Reports, Vol. 5, Article No. 14327, September 21, 2015.

Cheng, F., Yang, X., Rosenmann, D., Stan, L., Czaplewski, D. and Gao, J., “Enhanced Structural Color Generation in Aluminum Metamaterials Coated with a Thin Polymer Layer,” Optics Express, Vol. 23, pp. 25329 - 25339, September 18, 2015.

Hosder, S.

Shah, H., Hosder, S. and Winter, T., “A Mixed Uncertainty Quantification Approach with Evidence Theory and Stochastic Expansions,” International Journal for Uncertainty Quantification, Vol. 5, No. 1, pp. 21 - 48, January 2015.

Brune, A., Hosder, S., Gulli, S. and Maddalena, L., “Variable Transpiration Cooling Effectiveness in Laminar and Turbulent Flows for Hypersonic Vehicles,” AIAA Journal, Vol. 53, No. 1, pp. 176 - 189, January 2015.

West, T. and Hosder, S., “Uncertainty Quantification of Hypersonic Reentry Flows Using Sparse Sampling and Stochastic Expansions,” Journal of Spacecraft and Rockets, Vol. 52, No. 1, Special Section on Numerical Simulation of Hypersonic Flows, pp. 120 - 133, January - February 2015.

West, T., Hosder, S. and Winter, T., “Quantification of Margins and Uncertainties for Integrated Spacecraft Systems Models,” Journal of Spacecraft and Rockets, Vol. 52, No. 2, pp. 450 - 461, March - April 2015.

Brune, A., West, T., Hosder, S. and Edquist, K., “Uncertainty Analysis of Mars Entry Flows Over a Hypersonic Inflatable Aerodynamic Decelerator,” Journal of Spacecraft and Rockets, Vol. 52, No. 3, pp. 776 - 788, May - June 2015.

Shah, H., Hosder, S. and Winter, T., “Quantification of Margins and Mixed Uncertainties Using Evidence Theory and Stochastic Expansions,” Reliability Engineering and System Safety, Vol. 138, pp. 59 - 72, June 2015.

Shah, H., Hosder, S., Leifsson, L., Koziel, S. and Tesfahunegn, Y., “Multi-Fidelity Robust Aerodynamic Design Optimization Under Mixed Uncertainty,” Aerospace Science and Technology, Vol. 45, pp. 17 - 29, September 2015.

Kinzel, E.

Liyange, W. P. R., Mishra, S., Wilson, J. S., Kinzel, E., Durant, B. K. and Nath, M., “Fabrication of CdTe Nanorod Arrays Over Large Area Through Patterned Electrodeposition for Efficient Solar Energy Conversion,” Solar Energy Materials and Solar Cells, Vol. 133, pp. 260 - 267, February 2015.

Kinzel, E. C., Ginn, J. C., Florence, L. A., Lail, B. A. and Boreman, G. D., “Directional Thermal Emission from a Leaky-Wave Frequency-Selective Surface,” Journal of Nanophotonics, Vol. 9, pp. 093040-1 – 093040-7, December 2015.

Koylu, U.

Vaz, W., Nandi, A. K., Landers, R. G. and Koylu, U. O., “Electric Vehicle Range Prediction for Constant Speed Trip Using Multi–Objective Optimization,” Journal of Power Sources, Vol. 275, pp. 435 – 446, February 1, 2015.

Saripella, B. P., Leu, M. C. and Koylu, U. O., “Experimental and Computational Evaluation of Water Management and Performance Characteristics of a Bio-inspired PEM Fuel Cell,” ASME Journal of Fuel Cell Science and Technology, Vol. 12, pp. 061007-1 – 061007-9, December 2015.

Landers, R. G.

Vaz, W., Nandi, A. K., Landers, R. G. and Koylu, U. O., “Electric Vehicle Range Prediction for Constant Speed Trip Using Multi–Objective Optimization,” Journal of Power Sources, Vol. 275, pp. 435 – 446, February 1, 2015.

Li, S., Liu, Y. and Landers, R. G., “An Adaptive Evolutionary Algorithm for Optimizing Process Planning of Parallel Drilling Operations,” International Journal of Advanced Manufacturing Technology, Vol. 79, No. 5, pp. 1247 – 1263, February 5, 2015.

Li, S., Du, S., Tang, A., Landers, R. G. and Zhang, Y., “Force Modeling and Control of SiC Monocrystal Wafer Processing,” ASME Journal of Manufacturing Science and Engineering, Vol. 137, No. 6, pp. 061003-1 - 061003-10, December 2015.

Leu, M.

Kolan, K. C. R., Leu, M. C., Thomas, A. and Hilmas, G. E., “In Vitro Assessment of Pore Geometry of Borate Bioactive Glass Scaffolds Made by Laser Sintering,” Rapid Prototyping Journal, Vol. 21, No. 2, 2015, pp. 152 – 158, January 2, 2015.

Huang, Y., Leu, M. C., Mazumder, J. and Donmez, A., “Additive Manufacturing: Current State, Future Potential, Gaps & Needs, and Recommendations,” ASME Journal of Manufacturing Science and Engineering, Vol. 137, No. 1, February 2015.

Leu, M. C., Daphalapurkar, C. P., Zhu, W., Liu, F., Gilpin-McMinn, J. K. and Snodgrass, S. D., “Computer-automated Ergonomic Analysis Based on Motion Capture and Assembly Simulation,” International Journal of Virtual Reality, Vol. 19, Issue 2, pp. 119 - 128, June 2015.

Li, H., Taylor, G., Bheemreddy, V., Iyibilgin, O., Leu, M. and Chandrashekhara, K., “Modeling and Characterization of Fused Deposition Modeling Tooling for Vacuum Assisted Resin Transfer Molding Process,” Journal of Additive Manufacturing, Vol. 7, pp. 64 - 72, July 2015.

16

Modekurthy, V. P., Fletcher, K. K., Liu, X. and Leu, M. C., “Design and Implementation of a Broker for Cloud Additive Manufacturing Services,” ASME Journal of Manufacturing Science and Engineering, Vol. 137, No. 4, August 2015.

Saripella, B. P., Leu, M. C. and Koylu, U. O., “Experimental and Computational Evaluation of Water Management and Performance Characteristics of a Bio-inspired PEM Fuel Cell,” ASME Journal of Fuel Cell Science and Technology, Vol. 12, pp. 061007-1 – 061007-9, December 2015.

Liou, F.

Davis, B., Liou, F. and Huang, Y., “Study of Grain Size Variation and Saw-Tooth Spacing During Machining of Additively Manufactured Titanium Alloy,” MRS Communications, Vol. 5, No. 2, pp. 341 - 346, June 2015.

Sistla, H. R., Newkirk, J. W. and Liou, F., “Effect of Al/Ni ratio, Heat Treatment on Phase Transformations and Microstructure of AlxFeCoCrNi2−x (x = 0.3, 1) High Entropy Alloys,” Materials and Design, Vol. 81, pp. 113 – 121, June 15, 2015.

Amine, T., Newkirk, J. and Liou, F., “Methodology for Studying Effect of Cooling Rate During Laser Deposition on Microstructure,” Journal of Materials Engineering and Performance, Vol. 24, No. 8, pp. 3129 - 3136, August 2015.

Isanaka, S. P., Sparks, T. E., Liou, F. F. and Newkirk, J. W., “Design Strategy for Reducing Manufacturing and Assembly Complexity of Air-Breathing Proton Exchange Membrane Fuel Cells,” Journal of Manufacturing Systems, November 10, 2015.

Okafor, A.

Okafor, A. C., Singh, N., Singh, N. and Oguejiofor, B. N., “Acoustic Emission Detection and Prediction of Fatigue Crack Propagation in Composite Patch Repairs Using Neural Network,” Journal of Thermoplastic Composite Materials, Vol. 28, No. 6, pp. 1 - 27, June 2015.

Pan, H.

Pan, H. and Shou, W., “Single Crystal Formation in Micro/Nano-Confined Domains by Melt-Mediated Crystallization without Seeds,” Journal of Physics D: Applied Physics, Vol. 48, No. 22, pp. 225302-1 - 225302-12, May 2015.

Park, J.

Shin, H., Park, J., Han, S., Sastry, A. M. and Lu, W., “Component-/Structure-Dependent Elasticity of Solid Electrolyte Interphase Layer in Li-ion Batteries: Experimental and Computational Studies,” Journal of Power Sources, Vol. 277, pp. 169 - 179, March 2015.

Patel, R. L., Xie, H., Park, J., Asl, H. Y., Choudhury, A. and Liang, X., “Significant Capacity and Cycle-Life Improvement of Lithium-Ion Batteries through Ultrathin Conductive Film Stabilized Cathode Particles,” Advanced Materials Interfaces, Vol. 2, Issue 8, May 22, 2015.

Shin, H., Park, J., Sastry, A. M. and Lu, W., “Effects of Fluoroethylene Carbonate (FEC) on Anode and Cathode Interfaces at Elevated Temperatures,” Journal of The Electrochemical Society, Vol. 162, No. 9, A1683 - A1692, June 9, 2015.

Shin, H., Park, J., Sastry, A. M. and Lu, W., “Degradation of the Solid Electrolyte Interphase Induced by the Deposition of Manganese Ions,” Journal of Power Sources, Vol. 284, pp. 416 - 427, June 15, 2015.

Pernicka, H.

LeGrand, K. A., DeMars, K. J. and Pernicka, H. J., “Bearings-Only Initial Relative Orbit Determination,” Journal of Guidance, Control, and Dynamics, Vol. 38, No. 9, pp. 1699 – 1713, September 2015.

Rovey, J.

Rovey, J. L., Yang, X., Friz, P. D., Hu, C. and Glascock, M. S., “Plasmonic Force Space Propulsion,” Journal of Spacecraft and Rockets, Vol. 52, No. 4, pp. 1163 - 1168, July 2015.

Pahl, R. A. and Rovey, J. L., “Effects of DC Preionization Voltage and Radial Location on Pulsed Inductive Plasma Formation,” IEEE Transactions on Plasma Science, Vol. 43, No. 11, pp. 3883 - 3888, November 2015.

Tsai, H.

Li, Y., Cui, Z., Wang, W., Lin, C. H. and Tsai, H. L., “Formation of Linked Nanostructure–Textured Mound–Shaped Microstructures on Stainless Steel Surface via Femtosecond Laser Ablation,” Applied Surface Science, Vol. 324, pp. 775 - 783, January 2015.

Liu, J. W., Rao, Z. H., Liao, S. M. and Tsai, H. L., “Numerical Investigation of Weld Pool Behaviors and Ripple Formation for a Moving GTA Welding with Pulsed Currents,” International Journal of Heat and Mass Transfer, Vol. 91, pp. 990 - 1000, December 2015.

Wang, C.

Zhang, Z., Zhou, R., Brames, D. P. and Wang, C., “A Low-Cost Fabrication System for Manufacturing Soft-Lithography Microfluidic Master Molds,” Micro and Nanosystems, Vol. 7, No. 1, pp. 4 - 12, February 1, 2015.

Marin, A. G., Rossi, M., Rallabandi, B., Wang, C., Hilgenfeldt, S. and Kähler, C. J., “Three-Dimensional Phenomena in Microbubble Acoustic Streaming,” Physical Review Applied, Vol. 3, pp. 041001-1 - 041001-5, April 14, 2015.

Zhou, R. and Wang, C., “Acoustic Bubble Enhanced Pinched Flow Fractionation for Microparticle Separation,” Journal of Micromechanics and Microengineering, Vol. 25, No. 8, pp. 084005-1 - 084005-10, July 22, 2015.

Yang, X.

Sun, L., Yang, X., Wang, W. and Gao, J., “Diffraction-Free Optical Beam Propagation with Near-Zero Phase Variation in Extremely Anisotropic Metamaterials,” Journal of Optics, Vol. 17, pp. 1 - 7, February 2, 2015.

Deng, H., Li, Z., Stan, L., Rosenmann, D., Czaplewski, D., Gao, J. and Yang, X., “Broadband Perfect Absorber Based on One Ultrathin Layer of Refractory Metal,” Optics Letters, Vol. 40, No. 11, pp. 2592 - 2595, May 28, 2015.

Cheng, F., Gao, J., Stan, L., Rosenmann, D., Czaplewski, D. and Yang, X., “Aluminum Plasmonic Metamaterials for Structural Color Printing,” Optics Express, Vol. 23, No. 11, pp. 14552 - 14560, May 26, 2015.

Sun, L., Li, Z., Luk, T., Yang, X. and Gao, J., “Nonlocal Effective Medium Analysis in Symmetric Metal-Dielectric Multilayer Metamaterials,” Physical Review B, Vol. 91, pp. 195147-1 - 19547-9, May 27, 2015.

Geng, T., Zhuang, S., Gao, J. and Yang, X., “Nonlocal Effective Medium Approximation for Metallic Nanorod Metamaterials,” Physical Review B, Vol. 91, No. 24, pp. 245128-1 - 245128-7, June 12, 2015.

Cheng, F., Gao, J., Luk, T. and Yang, X., “Structural Color Printing Based on Plasmonic Metasurfaces of Perfect Light Absorption,” Nature: Scientific Reports, Vol. 5, Article No. 14327, June 5, 2015.

Zeng, J., Gao, J., Luk, T. S., Litchinitser, N. M. and Yang, X., “Structuring Light by Concentric-Ring Patterned Magnetic Metamaterial Cavities,” Nano Letters, Vol. 15, pp. 5363 - 5368, June 2015.

Rovey, J. L., Yang, X., Friz, P. D., Hu, C. and Glascock, M. S., “Plasmonic Force Space Propulsion,” Journal of Spacecraft and Rockets, Vol. 52, No. 4, pp. 1163 -1168, July 2015.

Cheng, F., Yang, X. and Gao, J., “Ultrasensitive Detection and Characterization of Molecules with Infrared Plasmonic Metamaterials,” Nature: Scientific Reports, Vol. 5, Article No. 14327, September 21, 2015.

Cheng, F., Yang, X., Rosenmann, D., Stan, L., Czaplewski, D. and Gao, J., “Enhanced Structural Color Generation in Aluminum Metamaterials Coated with a Thin Polymer Layer,” Optics Express, Vol. 23, Issue 19, pp. 25329 - 25339, September 18, 2015.

Yucelen, T.

Yucelen, T., Campa, G. and Fravolini, M. L., “Set Theoretic Performance Verification of Low-Frequency Learning Adaptive Controllers,” International Journal of Adaptive Control and Signal Processing, Vol. 29, Issue 10, pp. 1243 - 1258, October 2015.

Gruenwald, B. and Yucelen, T., “On Transient Performance Improvement of Adaptive Control Architectures,” International Journal of Control, Vol. 88, Issue 11, pp. 2305 - 2315, November 2015.

Birman, V.

Tuwair, H., Volz, J., ElGawady, M., Mohamed, M., Chandrashekhara, K. and Birman, V., “Performance of GFRP Bridge Deck Panels with Corrugated Web Layers Filled with PU Foam,” Proceedings of the Transportation Research Board, Paper No. 15-5403, pp. 1 - 13, Washington, DC, January 11 - 15, 2015.

Birman, V., Genin, G. and Thomopoulos, S., “Multiscale Enthesis Mechanics,” Proceedings of the 20th International Conference on Composite Materials, Paper No. 150701-1109, Copenhagen, Denmark, July 20 - 24, 2015.

Bristow, D.

Lou, J., Gilbert, L., Qu, C., Wilson, J., Kinzel, E., Bristow, D. A. and Landers, R. G., “Wire-Fed Additive Manufacturing of Transparent Glass Parts,” Proceedings of the 10th Manufacturing Science and Engineering Conference (MSEC2015), Paper No. MSEC2015-9377, Charlotte, NC, June 8 - 12, 2015.

Sammons, P. M., Bristow, D. A. and Landers, R. G., “DC-Gain Layer-to-Layer Stability Criterion in Laser Metal Deposition Processes,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1345 - 1355, Austin, TX, August 10 - 12, 2015.

Luo, J., Gilbert, L. J., Qu, C., Morrow, B., Bristow, D. A., Landers, R. G., Goldstein, J., Urbas, A. and Kinzel, E. C., “Solid Freeform Fabrication of Transparent Fused Quartz Using a Filament Fed Process,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 122 - 133, Austin, TX, August 10 - 12, 2015.

Sammons, P. M., Bristow, D. A. and Landers, R. G., “A Model Predictive Repetitive Process Control Formulation for Additive Manufacturing Processes,” Dynamic Systems and Control Conference, Paper No. DSCC2015-9780, Columbus, OH, October 28 – 30, 2015.

Chandrashekhara, K.

Tuwair, H., Volz, J., ElGawady, M., Mohamed, M., Chandrashekhara, K. and Birman, V., “Performance of GFRP Bridge Deck Panels with Corrugated Web Layers Filled with PU Foam,” Transportation Research Board, Paper No. 15-5403, pp. 1 - 13, Washington, DC, January 11 - 15, 2015.

Rummel, S. A., Van Aken, D. C., O’Malley, Lekakh, S., Wang, X. and Chandrashekhara, K., “High Strain Rate Hot Deformation of Steels: Measurement and Simulation,” International Conference on Advances in Product Metallurgy of Long and Forged Products, Paper No. 54, Vail, CO, July 12 - 15, 2015.

Wang, X., Chandrashekhara, K., Rummel, S. A., Lekakh, S., Van Aken, D. C. and O’Malley, R. J., “Modeling and Simulation of Hot Rolling Using Nonlinear Material Models,” International Conference on Advances in Product Metallurgy of Long and Forged Products, Paper No. 53, Vail, CO, July 12 - 15, 2015.

Anandan, S., Dhaliwal, G. S., Chandrashekhara, K., Berkel, T. R. and Pfitzinger, D., “Processing and Performance of Out-of-Autoclave Bismaleimide Composite Sandwich Structures,” Composites and Advanced Materials Expo (CAMX) Conference, Paper No. 0342, Dallas, TX, October 26 - 29, 2015.

REFEREED CONFERENCE PAPERS AND PROCEEDINGS

Meinders, R., Nicholas, J. and Chandrashekhara, K., “Hybrid Manufacturing Process of SiC/SiC Composite Using Preceramic Polymer,” Composites and Advanced Materials Expo (CAMX) Conference, Paper No. 0343, Dallas, TX, October 26 - 29, 2015.

Taylor, G., Wang, X., Motaparti, K. P., Meng, S., Leu, M. C. and Chandrashekhara, K., “Modeling and Characterization of Fused Deposition Modeling Tooling for Autoclave Process,” Composites and Advanced Materials Expo (CAMX) Conference, Paper No. 0344, Dallas, TX, October 26 - 29, 2015.

Mohamed, M., Dhaliwal, G. S., Huo, Z. and Chandrashekhara, K., “Evaluation of Low Velocity Impact Properties of Stitched Foam-Core Polyurethane Sandwich Structural Panel,” Composites and Advanced Materials Expo (CAMX) Conference, Paper No. 0345, Dallas, TX, October 26 - 29, 2015.

Hussein, R. M., Anandan, S. and Chandrashekhara, K., “Thermooxidation Induced Stresses in Bismaleimide Composites: Experiment and Simulation,” Composites and Advanced Materials Expo (CAMX) Conference, Paper No. 0346, Dallas, TX, October 26 - 29, 2015.

Abutunis, A., Taylor, G., Fal, M., Nicholas, J. and Chandrashekhara, K., “Performance Evaluation of Coaxial Horizontal Axis Hydrokinetic Composite Turbine System,” Composites and Advanced Materials Expo (CAMX) Conference, Paper No. 0341, Dallas, TX, October 26 - 29, 2015.

DeMars, K.

Darling, J. E. and DeMars, K. J., “Rigid Body Attitude Uncertainty Propagation Using the Gauss-Bingham Distribution,” 25th AAS/AIAA Space Flight Mechanics Meeting, Paper No. AAS 15-347, Williamsburg, VA, January 11 - 15, 2015.

DeMars, K. J. and McCabe, J. S., “Tracking of the Landsat 2 Primary Breakup,” 25th AAS/AIAA Space Flight Mechanics Meeting, Paper No. AAS 15-420, Williamsburg, VA, January 11 - 15, 2015.

McCabe, J. S., Frueh, C. and DeMars, K. J., “Integrated Detection and Tracking for Multiple Space Objects,” 25th AAS/AIAA Space Flight Mechanics Meeting, Paper No. AAS 15-361, Williamsburg, VA, January 11 - 15, 2015.

DeMars, K. J., McCabe, J. S. and Darling, J. E., “Collaborative Multi-Sensor Tracking and Data Fusion,” 25th AAS/AIAA Space Flight Mechanics Meeting, Paper No. AAS 15-418, Williamsburg, VA, January 11 - 15, 2015.

LeGrand, K. A. and DeMars, K. J., “Space-Based Relative Multitarget Tracking,” 25th AAS/AIAA Space Flight Mechanics Meeting, Paper No. AAS 15-362, Williamsburg, VA, January 11 - 15, 2015.

Haberberger, S. J., Darling, J. E. and DeMars, K. J., “Distributed IMU Network Navigation Using Multi-Sensor Data Fusion,” 25th AAS/AIAA Space Flight Mechanics Meeting, Paper No. AAS 15-433, Williamsburg, VA, January 2015.

LeGrand, K. A. and DeMars, K. J., “Relative Multiple Space Object Tracking Using Intensity Filters,” 18th International Conference on Information Fusion, Paper No. 978-0-9964527-1-7, Washington, DC, July 2015.

DeMars, K. J., McCabe, J. S. and Darling, J. E., “Efficient Multi-Sensor Data Fusion for Space Surveillance,” 2015 American Control Conference, Paper No. 15-1108, Chicago, IL, July 2015.

Darling, J. E. and DeMars, K. J., “Minimization of the Kullback-Leibler Divergence for Nonlinear Estimation,” AAS/AIAA Astrodynamics Specialist Conference, Paper No. AAS 15-639, Vail, CO, August 2015.

Darling, J. E. and DeMars, K. J., “Analysis of the Gauss-Bingham Distribution for Attitude Uncertainty Propagation,” AAS/AIAA Astrodynamics Specialist Conference, Paper No. AAS 15-605, Vail, CO, August 2015.

Dharani, L.

Prokopf, V., Loebs, J., Dharani, L. R. and Leventis, N., “Processing and Mechanical Characterization of Polyurea Aerogels,” ASCE Earth and Space 2014 Conference, ASCE 2015, Paper No. 520, St. Louis, MO, October 26 - 28, 2014.

Dharani, L. R. and Wei, J., “Thermomechanical Modeling of Cone Sample of ZrB2-SiC Ceramic Under Arc-Jet Conditions,” ASCE Earth and Space 2014 Conference, ASCE 2015, Paper No. 513, St. Louis, MO, October 26 - 28, 2014.

Du, X.

Du, X. and Zhu, Z., “Uncertainty Quantification in Time-Dependent Reliability Analysis,” ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Paper No. DETC2015-46168, Boston, MA, August 2 - 5, 2015.

Du, X., “Development of Engineering Uncertainty Repository,” ASME 2015 International Mechanical Engineering Congress & Exposition, IDETC/CIE 2015, Paper No. DETC2015-46172, Boston, MA, August 2 - 5, 2015.

Du, X., Zhu, Z. and Hu, Z., “Reliability Analysis for Multidisciplinary Systems Involving Stationary Stochastic Processes,” ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Paper No. DETC2015-46168, Boston, MA, August 2 - 5, 2015.

Du, X. and Zhu, Z., “Extreme Value Metamodeling for System Reliability with Time-Dependent Functions,” ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Paper No. DETC2015-46162, Boston, MA, August 2 - 5, 2015.

Takai, S. and Du, X., “Evaluations of Engineering Uncertainty,” ASME 2015 International Mechanical Engineering Congress & Exposition, Paper No. IMECE2015-53555, Houston, TX, November 13 – 19, 2015.

Cheng, Y. and Du, X., “System Reliability Analysis with Dependent Component Failures During Early Design Stage,” ASME 2015 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference, Paper No. IMECE2015-50269, Houston, TX, November 13 – 19, 2015.

Zhu, Z., Hu, Z. and Du, X., “Extreme Value Metamodeling for System Reliability with Time-Dependent Functions,” ASME 2015 International Design and Engineering Technical Conferences & Computers and Information in Engineering Conference, Paper No. IMECE2015-53441, Houston, TX, November 13 – 19, 2015.

Duan, L.

Zhang, C. and Duan, L., “Acoustic Radiation from High-Speed Turbulent Boundary Layers in a Tunnel-Like Environment,” AIAA Aerospace Sciences and Technology Forum and Exposition (SciTech 2015), AIAA Paper No. 2015-0836, Kissimmee, FL, January 2015.

Li, F., Choudhari M. M. and Duan, L., “Direct Numerical Simulation of Transition Due to Traveling Crossflow Vortices,” Proceeding of the 45th AIAA Fluid Dynamics Conference (AIAA Aviation 2015), Paper No. AIAA 2015-2771, Dallas, TX, June 22 - 26, 2015.

Wei, J. and Duan, L., “Piezoelectric-Based Rotary Electrical Energy Generator for Harvesting Energy from Low and Highly Variable Rotary Motion,” Proceedings of ASME 2015 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Paper No. SMASIS2015-8879, Colorado Springs, CO, September 21 - 23, 2015.

Hosder, S.

Leifsson, L., Koziel, S. and Hosder, S., “Multi-Objective Aeroacoustic Shape Optimization by Variable-Fidelity Models and Response Surface Surrogates,” 53rd AIAA Aerospace Sciences Meeting (SciTech 2015), Paper No. AIAA-2015-1800, Kissimmee, FL, January 5 - 9, 2015.

Shah, H., Hosder, S., Leifsson, L., Koziel, S. and Tesfahunegn, Y., “Multi-Fidelity Robust Aerodynamic Design Optimization Under Mixed Uncertainty,” 17th AIAA Non-Deterministic Approaches Conference (SciTech 2015), Paper No. AIAA-2015-0917, Kissimmee, FL, January 5 - 9, 2015.

Tesfahunegn, Y., Koziel, S., Gramanzini J., Hosder, S., Han, Z. and Leifsson, L., “Application of Direct and Surrogate-Based Optimization to Two-Dimensional Aerodynamic Problems: A Comparative Study,” 53rd AIAA Aerospace Sciences Meeting (SciTech 2015), Paper No. AIAA-2015-0265, Kissimmee, FL, January 5 - 9, 2015.

Schaefer, J., West, T., Hosder, S., Rumsey, C., Carlson, J. and Kleb, W., “Uncertainty Quantification of Turbulence Model Closure Coefficients for Transonic Wall-Bounded Flows,” Proceedings of the 22nd AIAA Computational Fluid Dynamics Conference (AIAA Aviation 2015), Paper No. AIAA 2015-2461, Dallas, TX, June 22 - 26, 2015.

Brune, A., Hosder, S. and Edquist, K., “Uncertainty Analysis of Fluid-Structure Interaction of a Deformable Hypersonic Inflatable Aerodynamic Decelerator,” Proceedings of the 20th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, Paper No. AIAA-2015-0917, Glasgow, Scotland, July 6 - 9, 2015.

Kinzel, E.



Koylu, U.

Saripella, B. P., Leu, M. C. and Koylu, U. O., “Comparisons of Performances and Liquid Water Distributions within Bio-Inspired and Single Serpentine Pen Fuel Cell Channels,” ASME 2015 13th Fuel Cell Science, Engineering, and Technology Conference (PowerEnergy2015), Paper No. PowerEnergy2015-49099, San Diego, CA, June 28 - July 2, 2015.

Vaz, W., Nandi, A. K. and Koylu, U. O., “Finding an Optimal Driving Strategy for an Electric Bus Based on Operational Data,” ASME Power & Energy 9th International Conference on Energy Sustainability, San Diego, CA, June 28 - July 2, 2015.

Saripella, B. P., Leu, M. C. and Koylu, U. O., “Comparisons of Performances and Liquid Water Distributions within Bio-Inspired and Single Serpentine PEM Fuel Cell Channels,” ASME 2015 13th Fuel Cell Science, Engineering, and Technology Conference (PowerEnergy2015), Paper No. PowerEnergy2015-49099, San Diego, CA, June 28 - July 2, 2015.

Khairallah, H. A. and Koylu, U. O., “A Computational Study of In-cylinder NOx Reduction Strategies for a Compression-Ignition Engine Fueled with Diesel/Hydrogen Mixtures,” ASME Power & Energy 9th International Conference on Energy Sustainability, San Diego, CA, June 28 - July 2, 2015.

Khairallah, H. A. and Koylu, U. O., “Influence of Ignition Timing and EGR on the NOx Emission and Performance of a SI Engine Fueled with Hydrogen,” ASME IMECE 2015, Houston, TX, November 13 - 19, 2015. 18

Landers, R. G.


Li, W., Ghazanfari, A., Leu, M. C. and Landers, R. G., “Methods of Extrusion on Demand for High Solids Loading Alumina Paste in Freeze-Form Extrusion Fabrication,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 332 - 345, Austin, TX, August 10 - 12, 2015.

Sammons, P. M., Bristow, D. A. and Landers, R. G., “DC-Gain Layer-to-Layer Stability Criterion in Laser Metal Deposition Processes,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1345 - 1355, Austin, TX, August 10 - 12, 2015.


Li, W., Leu, M. C., Ghazanfari, A. and Landers, R. G., “Planning Freeform Extrusion Fabrication Processes with Consideration of Horizontal Staircase Effect,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1313 - 1323, Austin, TX, August 10 - 12, 2015.

Ghazanfari, A., Li, W., Leu, M. C. and Landers, R. G., “Optimal Rastering Orientation in Freeform Extrusion Fabrication Processes,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1324 - 1333, Austin, TX, August 10 - 12, 2015.

Sammons, P. M., Bristow, D. A. and Landers, R. G., “A Model Predictive Repetitive Process Control Formulation for Additive Manufacturing Processes,” ASME 2015 Dynamic Systems and Control Conference, Paper No. DSCC2015-9780, Columbus, OH, October 28 – 30, 2015.

Lotfi, N., Zomorodi, H. and Landers, R. G., “Thermal Management and Voltage Stabilization in Air–Forced Open–Cathode Fuel Cells,” ASME 2015 Dynamic Systems and Control Conference, Paper No. DSCC2015-9920, Columbus, OH, October 28 – 30, 2015.

Leu, M.

Saripella, B. P., Leu, M. C. and Koylu, U. O., “Comparisons of Performances and Liquid Water Distributions within Bio-Inspired and Single Serpentine Pen Fuel Cell Channels,” ASME 2015 13th Fuel Cell Science, Engineering, and Technology Conference (PowerEnergy2015), Paper No. PowerEnergy2015-49099, San Diego, CA, June 28 - July 2, 2015.

Fletcher, K. K., Liu, X. F. and Leu, M. C., “Personal Preference and Trade-Off Based Additive Manufacturing Web Service Selection,” 2015 IEEE International Conference on Web Services (ICWS), New York, NY, June 27 - July 2, 2015.

Dong, C., Leu, M. C. and Yin, Z., “American Sign Language Alphabet Recognition Using Microsoft KINECT,” IEEE Computer Society Workshop on Observing and Understanding Hands in Action (HANDS 2015), Boston, MA, June 12, 2015.

Ghazanfari, A., Li, W., Leu, M. C. and Landers, R. G., “Optimal Rastering Orientation in Freeform Extrusion Fabrication Processes,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1324 - 1333, Austin, TX, August 10 - 12, 2015.

Li, W., Leu, M. C., Ghazanfari, A. and Landers, R. G., “Planning Freeform Extrusion Fabrication Processes with Consideration of Horizontal Staircase Effect,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1313 - 1323, Austin, TX, August 10 - 12, 2015.

Thomas, A., Kolan, K. C. R., Leu, M. C. and Hilmas, G. E., “Freeform Extrusion Fabrication of Titanium Fiber Reinforced Bioactive Glass Scaffolds,”

Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1688 - 1699, Austin, TX, August 10 - 12, 2015.

Li, W., Ghazanfari, A., Leu, M. C. and Landers, R. G., “Methods of Extrusion on Demand for High Solids Loading Alumina Paste in Freeze-Form Extrusion Fabrication,” Proceedings of the 26th Solid Freeform

Fabrication Symposium, pp. 332 - 345, Austin, TX, August 10 - 12, 2015.

Li, J., Leu, M. C. and Hilmas, G. E., “Effects of Temperature on Aqueous Freeform Extrusion Fabrication,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 319 - 331, Austin, TX, August 10 - 12, 2015.

Bham, G. H., Leu, M. C. and Venkat, B., “A Driving Simulator Study to Evaluate the Impact of Portable Changeable Message Signs on Drivers’ Speed Characteristics,” Road Safety & Simulation International Conference, Orlando, FL, October 6 - 8, 2015.

Taylor, G., Wang, X., Motaparti, K. P., Meng, S., Leu, M. C. and Chandrashekhara, K., “Modeling and Characterization of Fused Deposition Modeling Tooling for Autoclave Process,” Composites and Advanced Materials Expo (CAMX) Conference, Paper No. 0344, Dallas, TX, October 26 - 29, 2015.

Wang, Q., Leu, M. C. and Koylu, U. O., “Nature-Inspired Flow Field with a Snowflake Design to Improve PEM Fuel Cell Performance,” ASME 2015 International Mechanical Engineering Congress & Exposition, Houston, TX, November 13 - 19, 2015.

Liou, F.

Newkirk, J., Amine, T. and Liou, F., “Component Level Tensile Testing of Press & Sinter Steels,” 2015 International Conference on Powder Metallurgy & Particulate Materials (POWDERMET 2015), San Diego, CA, May 17 - 20, 2015.

Liu, H., Sparks, T. and Liou, F., “Residual Stress and Deformation Modeling for Metal Additive Manufacturing Processes,” Proceedings of the 4th International Conference on Mechanics and Industrial Engineering, Paper No. 245, Barcelona, Spain, July 20 - 21, 2015.

Karnati, S., Sparks, T., Liou, F., Newkirk, J. W., Taminger, K. M. B. and Seufzer, W. J., “Laser Metal Deposition of Functionally Gradient Materials from Elemental Copper and Nickel Powders,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 789 - 802, Austin, TX, August 10 - 12, 2015.

Isanaka, S. P., Liou, F. and Newkirk, J., “Non-Prismatic Air-Breathing Fuel Cells - Concept, Design and Manufacturing,” Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2015, Paper No. ASME DETC2015-46493, Boston, MA, August 2 - 5, 2015.

Flood, A. and Liou, F., “Modeling of Powder Bed Processing – A Review,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1118 - 1128, Austin, TX, August 10 - 12, 2015.

Yan, L., Chen, X., Li, W., Liou, F. and Newkirk, J., “Direct Laser Deposition of Ti-6Al-4V from Elemental Powder Blends,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 691 - 699, Austin, TX, August 10 - 12, 2015.

Zhang, Y., Zhang, J., Liou, F. and Newkirk, J., “Microstructure and Property of TiB-Reinforced Ti Alloy Composites by Laser Metal Deposition,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 683 - 690, Austin, TX, August 10 - 12, 2015.

Zhang, J., Zhang, Y., Liou, F., Newkirk, J., Taminger, K. M. B. and Seufzer, W. J., “A Microstructure and Hardness Study of Functionally Graded Materials Ti6Al4V/TiC by Laser Metal Deposition,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 664 - 673, Austin, TX, August 10 - 12, 2015.

Bitragunta, V. S., Sparks, T. and Liou, F., “Performance Metric for Powder Feeder Systems in Additive Manufacturing,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 473 - 491, Austin, TX, August 10 - 12, 2015.

Gaja, H. and Liou, F., “Depth of Cut Monitoring for Hybrid Manufacturing Using Acoustic Emission Sensor,” Proceedings of the 26th Solid Freeform

Fabrication Symposium, pp. 422 - 436, Austin, TX, August 10 - 12, 2015.

Wang, Z., Liu, R., Sparks, T. and Liou, F., “A Framework for Large Scale Fused Pellet Modeling (FPM) by an Industry Robot,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 411 - 421, Austin, TX, August 10 - 12, 2015.

Kumar, K. S., Sparks, T. and Liou, F., “Parameter Determination and Experimental Validation of a Wire Feed Additive Manufacturing Model,” Proceedings of the 26th Solid Freeform Fabrication Symposium, pp. 1129 - 1153, Austin, TX, August 10 - 12, 2015.

Park, J.

Lotfi, N., Landers, R. G., Li, L. and Park, J., “Electrochemical Model-Based Adaptive Estimation of Li-Ion Battery State of Charge,” ASME 2015 Dynamic Systems and Control Conference, Paper No. DSCC2015-9918, Columbus, OH, October 28 - 30, 2015.

Park, J., Lee, S., Hoffmann, J. and Sastry, A., “Study of the Effect of Electrode Microstructures on Battery Performance,” ASME 2015 International Mechanical Engineering Congress & Exposition, Paper No. IMECE2015-52601, Houston, TX, November 13 - 19, 2015.

Rovey, J.

Glascock, M. S., Rovey, J. L., Williams, S. and Thrasher, J., “Plasma Plume Characterization of Electric Solid Propellant Micro Pulsed Plasma Thrusters,” Proceedings of the 51st Joint Propulsion Conference, Paper No. AIAA-2015-4185, Monterey, CA, July 27 - 29, 2015.

Berg, S. P., Rovey, J. L., Prince, B. D., Miller, S. W. and Bemish, R. J., “Electrospray of Energetic Ionic Liquid Propellants for Multi-Mode Micropropulsion Applications,” Proceedings of the 51st Joint Propulsion Conference, Paper No. AIAA-2015-4011, Monterey, CA, July 27 - 29, 2015.

Yang, X.

Yang, X. and Zhang, X., “Enhanced Optical Forces in Plasmonic and Metamaterial Nanostructures,” Proceedings of the 6th International Conference on Metamaterials, Photonic Crystals and Plasmonics, META’15, New York, NY, August 4 - 7, 2015.

Yucelen, T.

Yucelen, T., Schatz, S., Gruenwald, B. and Holzapfel, F., “Application of a Novel Scalability Notion in Adaptive Control to Various Adaptive Control Frameworks,” AIAA Guidance, Navigation, and Control Conference (SciTech 2015), Paper No. AIAA 2015-0608, Kissimmee, FL, January 5 - 9, 2015.

Yucelen, T. and Gruenwald, B., “Performance Oriented Adaptive Architectures with Guaranteed Bounds,” AIAA Guidance, Navigation, and Control Conference (SciTech 2015), Paper No. AIAA 2015-0120, Kissimmee, FL, January 5 - 9, 2015.

Yucelen, T. and Gruenwald, B., “A Direct Uncertainty Minimization Framework in Model Reference Adaptive Control,” AIAA Guidance, Navigation, and Control Conference (SciTech 2015), Paper No. AIAA 2015-0610, Kissimmee, FL, January 5 - 9, 2015.

Yucelen, T. and Peterson, J., “An Active-Passive Networked Multiagent Systems Approach to Environment Surveillance,” AIAA Guidance, Navigation, and Control Conference (SciTech 2015), Paper No. AIAA 2015-2004, Kissimmee, FL, January 5 - 9, 2015.

Yucelen, T., Wagner, D. and Gruenwald, B., “A Design, Analysis, and Verification Framework for Adaptive Flight Control,” AIAA Guidance, Navigation, and Control Conference (SciTech 2015), Paper No. AIAA 2015-0611, Kissimmee, FL, January 5 - 9, 2015.

Yucelen, T., Peterson, J. D., Chowdhary, G. and Kannan, S., “Exploitation of Heterogeneity in Distributed Sensing: An Active-Passive Networked Multiagent Systems Approach,” 2015 American Control Conference, pp. 4112 - 4117, Chicago, IL, July 1 - 3, 2015.

Yucelen, T., Fravolini, M. L., Muse, J. and Valigi, P., “Analysis and Design of Adaptive Control Systems with Unmodeled Input Dynamics via Multiobjective Convex Optimization,” 2015 American Control Conference, pp. 1579 - 1584, Chicago, IL, July 1 - 3, 2015.

Yucelen, T., Gruenwald, B., Muse, J. and De La Torre, G., “Adaptive Control with Nonlinear Reference Systems,” 2015 American Control Conference, pp. 1579 - 1584, Chicago, IL, July 1 - 3, 2015.

De La Torre, G. and Yucelen, T., “Consensus with Reduced Communication Links via Relative Neighboring Velocity Information,” 2015 American Control Conference, pp. 3410 - 3415, Chicago, IL, July 1 - 3, 2015.

Fravolini, M. L., Yucelen, T., Moschitta, A. and Gruenwald, B., “A Non-Conservative Approach for the Estimation of the Region of Operation of Uncertain Adaptive Control Systems,” ASME Dynamic Systems and Control Conference, Paper No. DSCC2015-9665, Columbus, OH, October 28 - 30, 2015.

Gruenwald, B., Wanger, D., Yucelen, T. and Muse, J. A., “An LMI-Based Hedging Approach to Model Reference Adaptive Control with Actuator Dynamic,” ASME 2015 Dynamic Systems and Control Conference, Paper No. DSCC2015-9894, Columbus, OH, October 28 - 30, 2015.

De La Torre, G. and Yucelen, T., “State Emulator-Based Adaptive Architectures for Resilient Networked Multiagent Systems Over Directed and Time-Varying Graphs,” ASME 2015 Dynamic Systems and Control Conference, Paper No. DSCC2015-9802, Columbus, OH, October 28 - 30, 2015.

Albattat, A., Gruenwald, B. and Yucelen, T., “Event-Triggered Adaptive Control,” ASME Dynamic Systems and Control Conference, Paper No. DSCC2015-9724, Columbus, OH, October 28 - 30, 2015.

Yucelen, T., Peterson, J. D. and Moore, K. L., “Control of Networked Multiagent Systems with Uncertain Graph Topologies,” ASME 2015 Dynamic Systems and Control Conference, Paper No. DSCC2015-9649, Columbus, OH, October 28 - 30, 2015.

Tran, D. and Yucelen, T., “Control of Multiagent Formations: A Multiplex Information Networks-Based Approach,” ASME Dynamic Systems and Control Conference, Paper No. DSCC2015-9644, Columbus, OH, October 28 - 30, 2015.

Wang, C.

Wong, T. N., Wang, C. and Li, H., “Liquid-Liquid Stratified Flow in Microchannels,” Encyclopedia of Microfluidics and Nanofluidics, Editor: Li, Dongquing, pp. 1662 - 1678, ISBN:978-1-4614-5488-5, January 11, 2015.

Balakrishnan, S.

Balakrishnan, S., “Neural Network Based Control: Development, Applications and Future Directions,” 2015 IFAC Workshop on Advanced Control and Navigation for Autonomous Aerospace Vehicles, Seville, Spain, June 10 - 12, 2015.

Birman, V.

Birman, V., “Multiscale Mechanics of Tendon-to-Bone Insertion Site,” Distinguished Lecture Series, Florida Atlantic University, Boca Raton, FL, November 6, 2015.

Tuwair, H., Volz, J., ElGawady, M. A., Mohamed, M., Chandrashekhara, K. and Birman, V., “Testing and Evaluation of GFRP Sandwich Bridge Deck Panels with Polyurethane Foam Core,” ASME 2015 International Mechanical Engineering Congress and Exposition, Houston, TX, November 13 - 19, 2015.

Birman, V., Genin, G. M. and Thomopoulos, S., “Multifunctional and Multiscale Natural Optimization of the Tendon-to-Bone Insertion Site: Composite Mechanics Lessons from Biology,” ASME 2015 International Mechanical Engineering Congress and Exposition, Houston, TX, November 13 - 19, 2015.

Duan, L.

Duan, L., “Numerical Simulation of Freestream Acoustic Disturbances in Hypersonic Ground Facilities and Their Effect on Boundary Layer Transition,” Institute of Aerodynamics and Fluid Mechanics, Technische Universität Müchen, Müchen, Germany, January 13, 2015.

Duan, L., “Numerical Simulation of Freestream Acoustic Disturbances in Hypersonic Ground Facilities and Their Effect on Boundary Layer Transition,” Institute of Fluid Mechanics, Technische Universität Braunschweig, Braunschweig, Germany, January 15, 2015.

Duan, L., “Numerical Simulation of Shock Tunnel-Acoustics Interaction and Its Effect on Hypersonic Boundary-Layer Transition,” Air Force Research Laboratory, Dayton, OH, August 5, 2015.

Hosder, S.

Hosder, S., “Efficient Uncertainty Analysis of Mars Entry Flows Over a Hypersonic Inflatable Aerodynamic Decelerator,” Aerospace Engineering Seminar Series, Iowa State University, Ames, IA, April 16, 2015.

Kinzel, E.

Kinzel, E. C., “Additive Manufacturing of Optically Transparent Glass,” Naval Research Laboratory, Washington, DC, April 23, 2015.

Kinzel, E. C., “Optical/IR Antennas for Nanomanufacturing,” University of Texas at Austin, Austin, TX, May 8, 2015.

Koylu, U.

Koylu, U. O., “Advanced Simulations of Internal Combustion Engines Fueled by Hydrogen and Conventional Fuels,” International Conference on Energy Systems, Istanbul, Turkey, December 23, 2015.

Landers, R. G.

Landers, R. G., “Machine Tool and Robot Volumetric Error Compensation,” Wuhan University, Wuhan, China, June 17, 2015.

Landers, R. G., “Machine Tool and Robot Volumetric Error Compensation,” Tianjin University, Tianjin, China, June 18, 2015.

Landers, R. G., “Machine Tool and Robot Volumetric Error Compensation,” Xi’an University of Technology, Xi’an, China, June 24, 2015.

Landers, R. G., “Machine Tool and Robot Volumetric Error Compensation,” Huazhong University of Science and Technology, Wuhan, China, June 16, 2015.

Landers, R. G., “Machine Tool and Robot Volumetric Error Compensation,” Wuhan University of Technology, Wuhan, China, June 16, 2015.

Leu, M.

Leu, M., “Additive Manufacturing: A Critical Technology for Fabrication of 3D Parts with Geometric and Material Complexity,” Department of

Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL, February 3, 2015.

Leu, M., “Freeze-Form Extrusion Fabrication,” Department of Mechanical Engineering, Shiv Nadar University, India, August 19, 2015.

Leu, M., “Future Opportunities for AM Technologies and Applications,” National Workshop on Additive Manufacturing and 3D Printing, Shiv Nadar University, India, August 17 - 18, 2015.

Leu, M., “Additive Manufacturing Overview,” National Workshop on Additive Manufacturing and 3D Printing, Shiv Nadar University, India, August 17 - 18, 2015.

Liou, F.

Liou, F., “Multi-Physics, Multi-Scale Modeling of Directed Energy Deposition Processes,” Navy’s Structural Mechanics TIM Meeting, Falls Church, VA, June 24 - 26, 2015.

Liou, F., “Precision Metal Parts with Hybrid Additive Manufacturing and Machining,” Metal Additive Tutorial Workshop, Austin, TX, June 23 - 24, 2015.

Liou, F., “Hybrid Additive Manufacturing for Precision Metal Parts,” Penn State Industrial Engineering Colloquium Series, Pennsylvania State University, State College, PA, October 1, 2015.

Liou, F., “Laser Deposition Technology for Additive Manufacturing and Repair,” Additive Adoption for Aerospace Summit/Metal Additive Tutorial 2015, Los Angeles, CA, October 26 - 28, 2015.

Okafor, A.

Okafor, A. C., “Advanced Manufacturing Education and Research at Missouri University of Science and Technology: Strategies for the Development of Talented Manufacturing Workforce,” 2015 Annual Meeting of the Missouri Association of Manufacturers, Springfield, MO, February 3 - 4, 2015.

Pan, H.

Pan, H., “Electronics Manufacturing with Laser Processing of Nanoscale Materials and Fundamental,” Department of Mechanical Engineering, University of Missouri - Columbia, Columbia, MO, May 7, 2015.

Park, J.

Park, J., “Degradation in Lithium-ion Batteries,” University of Missouri, Columbia, MO, February 10, 2015.

Park, J., “Research Activities of the Missouri S&T Advanced Energy Materials and Systems Laboratory,” EaglePicher, Joplin, MO, February 6, 2015.

Rovey, J.

Rovey, J., “Plasmonic Space Propulsion,” Air Force Office of Scientific Research Contractors Meeting, Arlington, VA, September 30, 2015.

Wojnar, C.

Wojnar, C. S., “Exploring the Kinetics of Domain Switching in Ferroelectrics for Structural Applications,” Mechanical and Aerospace Engineering Seminar, University of Colorado Colorado Springs, Colorado Springs, CO, September 21 - 23, 2015.

Yang, X.

Yang, X., “Optical Metamaterials,” Brewer Science, Rolla, MO, January 2015.

Yang, X. and Zhang, X., “Enhanced Optical Forces in Plasmonic and Metamaterial Nanostructures,” META’15, 6th International Conference on Metamaterials, Photonic Crystals and Plasmonics, New York, NY, August 4 - 7, 2015.

CONTRIBUTIONS TO BOOKS AND BOOKS PUBLISHED

INVITED TALKS

20

Yucelen, T.

Yucelen, T., “Towards Multiobjective Adaptive Control for Safety-Critical Dynamical Systems,” Aerospace Control and Guidance Systems Committee, Portland, OR, October 3 - 6, 2015.

Yucelen, T., “Distributed Information Fusion and Control: Current Status and Challenges,” Army Science Planning and Strategy Meeting on Distributed and Collaborative Intelligent Systems, Adelphi, MD, December 12, 2015.

Birman, V.

Genin, G., Babaei, B., Boyle, J., Demyier-Black, A., Hu, Y., Lipner, J., Saadat, F., Birman, V. and Thomopoulos, S., “Multiscale Modelling of Partially Mineralized Tissues,” ASME 4th Global Conference on Nanoengineering for Medicine and Biology (NEMB 2015), Paper No. NEMB2015-8120, Minneapolis, MN, April 19 - 22, 2015.

Hu, Y., Birman, V., Demyier-Black, A., Schwartz, A. G., Thomopoulos, S. and Genin, G., “Stochastic Interdigitation as a Cross-Scale Toughening Mechanism at the Attachment of Tendon to Bone,” ASME 4th Global Conference on Nanoengineering for Medicine and Biology (NEMB 2015), Paper NEMB2015-8091, Minneapolis, MN, April 19 - 22, 2015.

Lipner, J., Boyle, J., Birman, V., Genin, G. and Thomopoulos, S., “Network Stiffening of Nanofiber Scaffolds by Mineral,” Summer Biomechanics, Bioengineering and Biotransport Conference (SB3C2015), Snowbird Resort, UT, June 17 - 20, 2015.

Saadat, F., Birman, V., Thomopoulos, S. and Genin, G. M., “Functional Grading of Chondron,” ASME 2015 International Mechanical Engineering Congress & Exposition, Paper No. IMECE2015-52591, Houston, TX, November 13 - 19, 2015.

Bristow, D.

Lou, J., Gilbert, L., Qu, C., Bristow, D. A., Landers, R. G. and Kinzel, E., “Additive Manufacturing of Optical Materials,” Society of Photographic Instrumentation Engineers (SPIE) DSS, Baltimore, MD, April 8 – 12, 2015.

Duan, L.

Duan, L., “Simulation of Acoustic Radiation from Turbulent Boundary Layers at High Mach Numbers,” STO AVT-240 Specialist Meeting, Tucson, AZ, March 26 - 27, 2015.

Jeyapaul, E. and Duan, L., “Predicting Riblet Performance Using Anisotropy-Resolving Turbulence Models,” 1st Annual Meeting of SIAM Central States Section, Rolla, MO, April 11 - 12, 2015.

Zhang, C. and Duan, L., “Radiation from Tunnel-Wall Turbulent Boundary Layers,” 1st Annual Meeting of SIAM Central States Section, Rolla, MO, April 11 - 12, 2015.

Duan, L., “Direct Numerical Simulation for Laminar-to-Turbulent Transition Prediction,” 1st Annual Meeting of SIAM Central States Section, Rolla, MO, April 11 - 12, 2015.

Gao, J.

Li, Z., Sun, L., Yang, X. and Gao, J., “Experimental Characterization of Subwavelength Quasi-Periodic Metal-Dielectric Stacks,” 9th Annual ISC Graduate Research Symposium, Rolla, MO, April 27, 2015.

Yang, X., Cheng, F. and Gao, J., “Controlling Visible Color Absorption with Metal-Dielectric Multilayer Metamaterial Structures,” 3M Science and Engineering Faculty Day, St. Paul, MN, June 25, 2015.

Hosder, S.

Brune, A., Hosder, S. and Edquist, K., “Fluid-Structure Interaction Uncertainty Over a Deformable Hypersonic Inflatable Aerodynamic Decelerator,” Poster Presentation, 12th International Planetary

Probe Workshop, Cologne, Germany, June 15 - 19, 2015.

Isaac, K.

Yuan, F. and Isaac, K. M., “A Study of Mixing in a Magnetohydrodynamic Microfluidic Cell By Numerical Simulation,” Proceedings of the 227th Electrochemical Society Meeting, Chicago, IL, May 24 - 28, 2015.

Kinzel, E.


Koylu, U.

Wang, Q., Leu, M. C. and Koylu, U. O., “Design and Optimization of Flow Fields to Improve PEM Fuel Cell Performance,” Poster Paper, ASME Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, NC, June 8 - 12, 2015.

Landers, R. G.


Leu, M.

Wang, Q., Leu, M. C. and Koylu, U. O., “Design and Optimization of Flow Fields to Improve PEM Fuel Cell Performance,” Poster Paper, ASME Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, NC, June 8 - 12, 2015.

Moradpour, S., Wu, S., Long, S., Leu, M. C., Smith, B. and Konur, D., “Use of Driving Simulators to Compare Work Zone Sign Configurations,” Industrial & Systems Engineering Research Conference (ISERC), Nashville, TN, May 30 – June 2, 2015.

Leu, M., “A Case Study of Topology Optimization by Additive Manufacturing,” Scientific Technical Committee “Dn” (DESIGN) Meeting, CIRP General Assembly Meeting, Cape Town, South Africa, August 24 - 29, 2015.

Leu, M., “Freeze-Form Extrusion Fabrication of Ceramic-Metal Functionally Graded Materials,” Scientific Technical Committee “E” (Electro-Physical & Chemical Processes) Meeting, CIRP General Assembly Meeting, Cape Town, South Africa, August 24 - 29, 2015.

Bham, G. H., Leu, M. C. and Venkat, B., “A Driving Simulator Study to Evaluate the Impact of Portable Changeable Message Signs on Drivers’ Speed Characteristics,” Road Safety & Simulation International Conference, Orlando, FL, October 6 - 8, 2015.

Taylor, G., Wang, X., Motapart, X., Meng, S., Leu, M. C. and Chandrashekhara, K, “Modeling and Characterization of Fused Deposition Modeling Tooling for Autoclave Process,” Composites and Advanced Materials Expo (CAMX 2015), Dallas, TX, October 26 - 29, 2015.

Liou, F.

Liou, F., “Laser Deposition Technology for Additive Manufacturing and Repair,” Additive Adoption for Aerospace Summit/Metal Additive Tutorial 2015, Los Angeles, CA, October 26 - 28, 2015.

Park, J.

Park, J., Shin, H. and Li, J., “Mechanical Stability of the Solid Electrolyte Interphase Layer in Lithium-Ion Batteries,” ASME 2015 Applied Mechanics and Materials Conference, Seattle, WA, June 29 - July 1, 2015.

Lotfi, N., Landers, R. G., Li, L. and Park, J., “Electrochemical Model-Based Adaptive Estimation of Li-Ion Battery State of Charge,” ASME 2015 Dynamic Systems and Control Conference, Paper

No. DSCC2015-9918, Columbus, OH, October 28 - 30, 2015.

Park, J., Lee, S., Hoffmann, J. and Sastry, A., “Study of the Effect of Electrode Microstructures on Battery Performance,” ASME 2015 International Mechanical Engineering Congress & Exposition, Houston, TX, November 13 - 19, 2015.

Wang, C.

Rallabandi, B., Marin, A. G., Rossi, M., Wang, C., Kaehler, C. J. and Hilgenfeldt, S., “Three-Dimensional Microstreaming Flows,” American Physical Society March Meeting, San Antonio, TX, March 2 - 6, 2015.

Zhou, R. and Wang, C., “Multiphase Ferrofluid Flows for Micro-Particle Sorting,” 68th American Physical Society Division of Fluid Dynamics Meeting, Boston, MA, November 22 - 24, 2015.

Rallabandi, B., Wang, C., Lin, G. and Hilgenfeldt, S., “Optimized Open-Flow Mixing: Insights from Microbubble Streaming,” 68th American Physical Society Division of Fluid Dynamics Meeting, Boston, MA, November 22 - 24, 2015.

Wojnar, C.

Wojnar, C. S., “Characterizing the Viscoelastic Stiffness and Damping of Ferroelectrics During Electric Field Cycling: Experiments and Modeling,” ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Colorado Springs, CO, September 21 - 23, 2015.

Wojnar, C. S., “Linking Microstructural Evolution in Ferroelectrics to their Dynamic Electromechanical Response,” Society of Engineering Science 52nd Annual Technical Meeting, Texas A&M, College Station, TX, October 26 - 28, 2015.

Wojnar, C. S., “Influence of Microstructure Evolution on the Viscoelasticity of Ferroelectrics,” Institute for Mathematics and Applications, Special Workshop, Eugene, OR, October 23 - 25, 2015.

Yang, X.

Li, Z., Sun, L., Yang, X. and Gao, J., “Experimental Characterization of Subwavelength Quasi-Periodic Metal-Dielectric Stacks,” 9th Annual ISC Graduate Research Symposium, Rolla, MO, April 27, 2015.

Yang, X., Cheng, F. and Gao, J., “Controlling Visible Color Absorption with Metal-Dielectric Multilayer Metamaterial Structures,” 3M Science and Engineering Faculty Day, St. Paul, MN, June 25, 2015.

Deng, H., Li, Z. and Yang, X., “Broadband Perfect Absorber Based on One Ultrathin Layer of Refractory Metal,” 11th Annual ISC Graduate Research Symposium Poster Presentation, Missouri University of Science and Technology, Rolla, MO, November 16, 2015.

Yucelen, T.

Yucelen, T., Gruenwald, B., Muse, J. and De La Torre, G., “Adaptive Control with Nonlinear Reference Systems,” 2015 American Control Conference, Chicago, IL, July 1 - 3, 2015.

De La Torre, G. and Yucelen, T., “Consensus with Reduced Communication Links via Relative Neighboring Velocity Information,” 2015 American Control Conference, Chicago, IL, July 1 - 3, 2015.

Yucelen, T., Fravolini, M. L., Muse, J. and Valigi, P., “Analysis and Design of Adaptive Control Systems with Unmodeled Input Dynamics via Multiobjective Convex Optimization,” 2015 American Control Conference, Chicago, IL, July 1 - 3, 2015.

Yucelen, T., Peterson, J. D., Chowdhary, G. and Kannan, S., “Exploitation of Heterogeneity in Distributed Sensing: An Active-Passive Networked Multiagent Systems Approach,” 2015 American Control Conference, Chicago, IL, July 1 - 3, 2015.

Gruenwald, B., Wanger, D., Yucelen, T. and Muse, J. A., “An LMI-Based Hedging Approach to Model Reference Adaptive Control with Actuator Dynamic,”

CONFERENCE PRESENTATIONS

ASME 2015 Dynamic Systems and Control Conference, Columbus, OH, October 28 - 30, 2015.

De La Torre, G. and Yucelen, T., “State Emulator-Based Adaptive Architectures for Resilient Networked Multiagent Systems Over Directed and Time-Varying Graphs,” ASME 2015 Dynamic Systems and Control Conference, Columbus, OH, October 28 - 30, 2015.

Albattat, A., Gruenwald, B. and Yucelen, T., “Event-Triggered Adaptive Control,” ASME 2015 Dynamic Systems and Control Conference, Columbus, OH, October 28 - 30, 2015.

Fravolini, M. L., Yucelen, T., Moschitta, A. and Gruenwald, B., “A Non-Conservative Approach to the Estimation of the Region of Operation of Uncertain Adaptive Control Systems,” ASME Dynamic Systems and Control Conference, Columbus, OH, October 28 - 30, 2015.

Yucelen, T., Peterson, J. D. and Moore, K. L., “Control of Networked Multiagent Systems with Uncertain Graph Topologies,” ASME 2015 Dynamic Systems and Control Conference, Columbus, OH, October 28 - 30, 2015.

Tran, D. and Yucelen, T., “Control of Multiagent Formations: A Multiplex Information Networks-Based Approach,” ASME Dynamic Systems and Control Conference, Columbus, OH, October 28 - 30, 2015.

Fravolini, M. L., Yucelen, T., Moschitta, A. and Gruenwald, B., “A Non-Conservative Approach for the Estimation of the Region of Operation of Uncertain Adaptive Control Systems,” ASME 2015 Dynamic Systems and Control Conference, Columbus, OH, October 28 - 30, 2015.

Balakrishnan, S.

Jason Stumfoll (MSAE), Advisor: Balakrishnan, S., “Discrete-Time Neural Network Based State Observer with Neural Network Based Control Formulation for a Class of Systems with Unmatched Certainties,” June 2015.

Bristow, D.

Abdulmohsen Alabdumuhsin (MSME), Advisor: Bristow, D., “A Force Feedback Haptic Interface for Atomic Force Microscopy,” June 2015.

Alireza Toghraee (MSME), Advisor: Bristow, D., “Estimation of Tip-Sample Force in Tapping Mode Atomic Force Microscopy Using Neural-Network and Repetitive Control Approaches,” July 2015.

Chandrashekhara, K.

Robert Raymond Meinders (MSAE), Advisor: Chandrashekhara, K., “Hybrid Manufacturing Process of SiC/SiC Composite Using Preceramic Polymer,” October 2015.

DeMars, K.

Keith LeGrand (MSAE), Advisor: DeMars, K., Co-advisor: Pernicka, H., “Space-Based Relative Multitarget Tracking,” October 2015.

Drallmeier, J.

Krishawn Goodwin (MSME), Advisor: Drallmeier, J., “Thermodynamic and Chemical Kinetic Coupled Modeling for the Determination of Cyclic Combustion Phasing of HCCI Engines,” June 2015.

Hosder, S.

Thomas West (PhDAE), Advisor: Hosder, S., “Advancements in Uncertainty Quantification with Stochastic Expansions Applied to Supersonic and Hypersonic Flows,” March 2015.

Joe-Ray Gramanzini (MSAE), Advisor: Hosder, S., “Adjoint-Based Airfoil Shape Optimization in Transonic Flow,” May 2015.

Harsheel Shah (PhDAE), Advisor: Hosder, S., “Investigation of Robust Optimization and Evidence Theory Using Stochastic Expansions for Aerospace Simulations Under Mixed Uncertainties,” May 2015.

John A. Schaefer (MSAE), Advisor: Hosder, S., “Uncertainty Quantification of Turbulence Model Closure Coefficients for Transonic Wall-Bounded Flows,” October 2015.

Huang, X.

Jaya Venkata Mehar Sthanka Avinash Kankipati (MSME), Advisor: Huang, X., “Multifunctional Wearable Epidermal Device for Physiological Signal Monitoring In Sleep Study,” December 2015.

Isaac, K.

Shubhadeep Banik (MSME), Advisor: Isaac, K., “Numerical Study of Upstream and Downstream Regions of One Dimensional Detonation Wave in a Dusty Gas Medium,” January 2015.

Kinzel, E.

Arvindvivek Ravichandran (MSME), Advisor: Kinzel, E., “Spatial and Temporal Modulation of Heat Source Using Light Modulator for Advanced Thermography,” January 2015.

Koylu, U.

Warren Vaz (PhDME), Advisor: Koylu, U., “Energy Management in Electric Vehicles: Development and Validation of an Optimal Driving Strategy,” April 2015.

Hassan Khairallah (PhDAE), Advisor: Koylu, U., “Combustion and Pollutant Characteristics of IC Engines Fueled with Hydrogen and Diesel/Hydrogen Mixtures Using 3D Computations with Detailed Chemical Kinetics,” July 2015.

Landers, R. G.

Hesam Zomorodi Moghadam (PhDME), Advisor: Landers, R. G., “Hierarchical Control of Manufacturing Systems,” October 2015.

Mingyang Li (PhDME), Advisor: Landers, R. G., “Modeling, Analysis, and Simulation for Aqueous-Based Ceramic Pastes in Freeze-Form Extrusion Fabrication Process,” December 2015.

Leu, M.

Albin Thomas (MSME), Advisor: Leu, M., “Freeform Extrusion Fabrication of Titanium Fiber Reinforced 13-93 Bioactive Glass,” July 2015.

Krishna Chaitanya Reddy Kolan (PhDME), Advisor: Leu, M., “Selective Laser Sintering of Bioactive Glass Scaffolds and their Biological Assessment for Bone Repair,” July 2015.

Krishna Prasanth Motaparti (MSME), Advisor: Leu, M., “Effects of Build Parameters on Mechanical Properties of ULTEM 9085 Parts by Fused Deposition Modeling,” December 2015.

Liou, F.

Niroop Matta (MSME), Advisor: Liou, F., “Development of Two Color Imaging Pyrometer for Studying Thermal History of Laser Metal,” January 2015.

Prudvi Teja Ravi (MSME), Advisor: Liou, F., “Laser Surface and Subsurface Repair During Metal Additive Manufacturing,” January 2015.

Sai Aravind Palepu (MSME), Advisor: Liou, F., “Developing a Novel Principle Methodology and Testbed for Fatigue Analysis of Metal Specimens,” January 2015.

Tarak Ali A. Amine (PhDME), Advisor: Liou, F., Co-advisor: Newkirk, J., “Investigation of Effect of Process Parameters on Multilayer Builds by Direct Metal Deposition,” March 2015.

Kannan Suresh Kumar (MSME), Advisor: Liou, F., “Parameter Determination and Experimental Validation of a Wire Feed Additive,” July 2015.

Midha, A.

Sushrut Bapat (PhDME), Advisor: Midha, A., “On the Design and Analysis of Compliant Mechanisms Using the Pseudo-Rigid-Body Model Concept,” March 2015.

Abdulhakim Amer Agll (PhDME), Advisor: Midha, A., “Local Alternative Sources for Cogeneration Combined Heat and Power System,” April 2015.

Yousif M. Habib Hamad (PhDME), Advisor: Midha, A., Co-advisor: Sheffield, J., “Design Studies of Infrastructural Development for Applications of Hydrogen Energy Technologies,” April 2015.

Tarek A Mohammed Hamad (PhDME), Advisor: Midha, A., “System Integration of Hydrogen Energy Technologies Using Renewable Energy Resources,” April 2015.

Krutika Karthik (MSME), Advisor: Midha, A., “On the Design of a Nearly Constant-Force Module Based on a Compliant Slider Mechanism,” May 2015.

Andrew Christian (MSME), Advisor: Midha, A., “On the Dyanimc Analysis of Compliant Mechanisms Based on the Pseudo-Rigid Body Model,” October 2015.

Okafor, A.

Abdulhakim Ali Sultan (PhDME), Advisor: Okafor, A., “Mechanistic Modeling of Cutting Forces in Wavy-Edge Bull-Nose Helical End-Milling of Inconel 718 Under Different Cooling-Lubrication Strategies,” May 2015.

Out-of-Department

Baburaj Kanagarajan (MSME), Advisor: Corns, S., “Emission and Energy Analysis of Self-sufficient Biomass Power Plant to Achieve Near Net Zero CO2 Emission,” January 2015.

Pan, H.

Mahati Guntupalli (MSME), Advisor: Pan, H., “Laser Sintering and Aerosol Printing of Conductive Nanoparticles,” November 2015.

Pernicka, H.

Keith LeGrand (MSAE), Advisor: DeMars, K., Co-advisor: Pernicka, H., “Space-Based Relative Multitarget Tracking,” October 2015.

Rovey, J.

Shawn Miller (PhDAE), Advisor: Rovey, J., “Analysis of Ion Emitting Jet Structures During Ionic Liquid Electrospray,” March 2015.

Warner Meeks (PhDAE), Advisor: Rovey, J., “Pulsed Inductive Plasma Studies by Spectroscopy and Internal Probe Methods,” June 2015.

Steven Berg (PhDAE), Advisor: Rovey, J., “Development of Ionic Liquid Multi-Mode Micropropulsion Systems,” October 2015.

M.S. THESIS AND PH.D. DISSERTATIONS

22

EMA2 0 15 A N N U A L S C H O L A R LY A C T I V I T Y R E P O R T

Department of Mechanical and Aerospace EngineeringMissouri University of Science and Technology194 Toomey Hall400 W. 13th StreetRolla, MO 6540

mae repor… · 2014 - 2015 outstanding teaching award. dr. x. du. global learning 2015 outstanding...

Documents