magic lamp arduino uno race12

MAGIC LAMPWith arduino uno

D3 – RACE‘2A’

When or where we used

it ?

What is the temperature lamp ?

Which kind of system that this temperature lamp is used ?

How can it work ?

LIST

NEXT

What Is The Temperature Lamp ?

Temperature Lamp is a lamp that we can used it for light some places with different function of different colors of that lamp.

When Or Where Can We Used It ?

We can used it in everywhere but, if we wanted to get a nice performance, we should have to put it on the dark places. Because this lamp its especially used for your bedroom.

So when you sleep, you just not to get one kind of colors lamp, but you can see some different colors of your lamp.

.

Which Kind Of System That This Temperature Lamp Is Used ?

This lamp are built with three steps that can make one system, these steps are :

1.We used Arduino Uno and other components

2.We used electrical series3.We used some coding for the

system

.


These are components that we used for build

temperature lamp :

Arduino Uno&USB Cable

Laptop / pc

FrameworkOf

lamp

Casing Of

arduino

LED (red,blue,white

)

Resistor of the lamps (100µ)

TIN SOLDER WIRE, solder,

unsoldering

LDR

Resistor of LDR (10 kµ)

LM 35

CONNECTOR CABLES

PIN HEADER&

BLACK HOUSE

pcb


These are steps to make the temperature lamp :1. Prepare all of components and

make sure that all of it worked2. Make an electrical series like this

picture. But remember, we should have to pair it with voltage source (adaptor 5 V).


3. Combine two series of electrical (LDR and LM35) then put it on the PCB (in here, we also use solder and so on)

4. Turn ON the Arduino Uno and make some coding like this…


5. And after that, put the arduino uno in the box or casing from acrylic.

6. After all of components ready to used, then we put it on the framework of the lamp.

7. Finally, we can turn on the lamp with adaptor or other power supply.

MAGIC LAMPWith

Arduino Uno

THE RESULTS….

How Can It Work ?This lamp can work (or the lamp will turn on) when

we put it on the dark places. Why? Because when we make the coding we set the sensor value of LDR is less than 500. So its mean when the sensor read no light around it, so the LED will turn ON. And the other way, when the sensor read light around it, the LED will turn OFF.

And how about the difference colors of the lamp?This is the special of our lamp. Its not just one

kind of color, but we can turn ON three kind of colors. We can call it temperature lamp because with LM 35 we can set one colors which has some range of temperature around it. So this lamp is not only for lighting, but this lamp can be used to for measuring temprature. ^^

SOURCE

http://www.ladyada.net/learn/sensors/tmp36.html

THANK YOU FOR YOURATTENTION ^_^

magic lamp arduino uno race12

Technology