magura ts suspension fork series

8/2/2019 MAGURA TS Suspension Fork Series

1/3

1/3

MAGURA press releaseMarch 2012

The right fork for every wheelThe new MAGURA TS suspension fork series

MAGURA has completely revised its suspension fork range. Now featuring new design

and new internals. The new forks answer to the name of MAGURA TS

(Team Suspension). Whether it's a 26", 29" or 650B/27.5" for the latest trend this

season MAGURA offers a matching model for every wheel diameter and a wide range

of applications.

Mountain bikes with large diameter wheels are in they promise a smooth ride at high

speed. But to make the most out of their potential you need to have a matching fork. That is

why the component specialist MAGURA has expanded its product range for 2012 to cater for

the new 29" and 650B/27.5" trends in mountain biking. The product range also includes new

models for 26" wheels with 80 to 150 millimetres of travel for

cross country, marathon and all mountain.

No compromise: MAGURA 29" suspension fork with M15 thru-axle

The new 29" forks are available with a travel of 80 up to 120 millimetres. Their design is

engineered without compromise for high stiffness. The ultra-stable DAD arch (Double Arch

Design) and the new MAGURA M15 thru-axles make a major contribution here. The steer

tube options offered by MAGURA are the standard 1 1/8" and a tapered version. The tapered

steer tubes can fit very short head tubes on small 29" frames.

MAGURA suspension forks for 650B/27.5"

MAGURA also has suspension forks to match the new trend in 650B/27.5" wheels with a

travel of 120 to 150 millimetres. They are compatible with almost all 650B/27.5" tyres

currently available on the market. The fork-design is weight-optimised.

DAD (Double Arch Design) and QR15 thru-axles ensure high stiffness.


2/3

2/3

The MAGURA suspension fork series

All TS forks have been developed based on the SLE concept (Stiffer, Lighter, Easier). This

means optimum stiffness at the lowest possible weight, extremely low maintenance, and a

easy set up. With the Fork Master Concept (FMC) it is possible to manufacture forks with a

sensitive response where special bushings, seals and surfaces work together with the Fork

Master Grease (FMG) to deliver an exceptional ride. The forks feature progressive

suspension characteristics that prevent over-response even in steep terrain. The TS8 R 150

is offered as a fixed travel version or with the LS (Lift Select) system.

M15 thru-axles with integrated tool

The new MAGURA M15 thru-axles have been especially developed for MAGURA 29"

suspension forks. A special feature is the self-retaining thread that makes additional locking

of the thru-axle unnecessary. Simply tighten the axle and the wheel is safely secured. The

MAGURA Tool for Torx T25 bolts is concealed inside the thru-axle, so you have always got

the tool for tightening the axle with you. At the same time it protects the thread against

contamination. The tool can also be used on the most bolts of MAGURA MT hydraulic

disc brakes and HS rim brakes. You can use them for changing brake pads or adjusting thelever settings, for example. This system of axle and integrated tool weighs only

58 grams.

Perfect fit between discs and 29" or 650B/27.5" wheels

29" and 650B/27.5" suspension forks are supplied exclusively with the PM7 disc brake mount

for discs with a diameter of 180 millimetres and upwards. Large wheels also need large discs

to ensure performance and durability.

Protection Caps

An intuitive feature are the Protection Caps at the lower end of the forks. They prevent

damage to the drop outs and rebound dial while the wheel is removed. These are fitted to all

MAGURA forks with thru-axles.


3/3

3/3

About MAGURA (Gustav Magenwirth GmbH & Co. KG)

With its headquarters in Bad Urach/ Germany, the MUNZ-MAGENWIRTH Group has four

business sectors operating at international level: bicycle components, power sports, controls

and injection moulding. MAGURA is a pioneer in producing bicycle and motorcycle

components and has a worldwide monopoly on hydraulic brakes for bicycle wheel rims. The

company is backed by a tradition of more than 100 years of competence in hydraulics and

materials. In addition to brakes and suspension forks for bicycles, the company develops and

manufactures industrial controls and injection moulding components. The name MAGURA

(founded 1893) stands for the name of the founder Gustav Magenwirth and the name of

the town in which the company is based Bad Urach.

(4.381 characters)

MAGURA TS series

SLE design (Stiffer, Lighter, Easier)

Travel of 80 to 150 millimetres

29" suspension fork with PM7 brake disc mount for brake discdiameter 180 millimetres and above

29" suspension fork with M15 thru-axle

650B/27.5" suspension fork with QR15 thru-axle

26" suspension fork with 9 millimetre quick-release axle or QR15 thru-axle

Colours: black and white

Available in retail from May 2012

For more information visit www.magura.comDownload images and text plus RSS newsfeed from

www.press-service.info/magura-enwww.facebook.com/magurapassionpeople

Press contact:Gustav Magenwirth GmbH & Co. KG TOC Agentur fr Kommunikation GmbH & Co. KGGtz Braun (Head of Marketing) Moritz Lembeck / Michael Scharnagl / Thomas AmmerStuttgarter Strae 48 Kolpingring 16D-72574 Bad Urach D-82041 OberhachingTel: +49 (0)7125 153 235 Tel: +49 (0)89 1430 400 [email protected] [email protected]/magura-en [email protected] www.press-service.info

www.toctoc.info

magura ts suspension fork series

Documents