mainboard oem sales - 05/2009 technotes v1.2 major changes vs. v1.0: -layout updated; ftp links...

Mainboard OEM Sales - 05/2009

TechNotes V1.2

Major changes vs. V1.0:

-Layout updated; FTP links updated

- Frontpanel Connector details added (page 9)

- S/PDIF Connector added (page 12)

- Chassis Intrusion details added (page 16)

- System Monitoring API details added (page 28)

- Link to „Climatic Testreport“ added (page 33)

- Overview „typical Power Consumption“ added (page 38)

- „Additional Notes“ updated (page 50/51)

- Details „System Watchdog“ added (page 52)

D2831-S / D2836-SD2831-S / D2836-S

TechNotes D283x-S V1.2 Copyright 2009 FUJITSU LIMITED2

• Overview and Features

• SystemMonitoring Page 19

• Thermography / Temperature Reference Points Page 31

• Power Supply Requirements; Typical Power Consumption Page 36

• Display Options (VGA, DVI, HDMI) Page 39

• Operating System Support Page 45

• Miscellaneous ( Page 49

• New FTP download link for D2831-S / D2836-S ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/

(provides BIOS; Drivers; Documents & Approvals; Specifications; Tools etc.)

Note: Further details are available in the D283x-S Mainboard Specification!

ContentContent


OverviewOverview

• Basic Features• Special Features• Onboard Connectors & Connector Specs


• Based on latest Intel Eaglelake technology (iQ45 + ICH10DO)

• Support for full range of latest Single-/Dual-/Quad-Core processors (up to 95W)• Intel® CoreTM 2 Quad Q9000 / Q8000 series• Intel® CoreTM 2 Duo E8000 / E6000 series• Intel® CoreTM 2 Duo E7000 / E4000 series• Intel® Pentium® dual-core E2000 / E5000 series• Intel® Celeron® dual-core E1000 series• Intel® Celeron® 400 series

• Four memory sockets DDR2/800 supporting up to 16GB

• Dual Gbit LAN onboard supporting ASF 2.0 and Teaming

• Trusted Platform Module TPM V1.2 onboard

• PCI Express Gen2

• State-of-the-art integrated graphics onboard

• 5.1 multichannel audio onboard

Basic Features D2831-S / D2836-SBasic Features D2831-S / D2836-S


Basic Features D2831-S / D2836-SBasic Features D2831-S / D2836-S


Designed & approved for enhanced operating temperaturerange from 0°C to 60°C

Designed & approved for 24/7 continuous operation

High Efficient core voltage regulator design (85% @ 65W)

Enhanced lifecycle up to 5 years

Special Features D2831-S / D2836-SSpecial Features D2831-S / D2836-S


Realtime Voltage Guard for secure system operation Monitoring of all relevant onboard voltages and system shutdown in case of failure

Internal socket for USB stick Install your USB dongle inside

the chassis w/o danger of theft

Internal socket for USB flashdrive Easy integration of flashdrives for Embedded OS or memory

extension. Mainboard prepared for mechanical fastener

Special Features D2831-S / D2836-SSpecial Features D2831-S / D2836-S

8

D2831-S: Onboard Interface ConnectorsD2831-S: Onboard Interface Connectors

8

CPU Fan

Internal COM2

Chassis Fan

internal Socket for USB Stick

Chassis Fan

Chassis Fan

Internal S/P-DIF

Audio Frontpanel

Chassis Intrusion

LCD Status Display

Buzzer

4 x USB 2.0

6 x SATA24 x SDRAM DDR2

Parallel Port Connector

Floppy Connector

12V Supply for Processor

Socket LGA775

iQ45

ICH10-DO

2 x PCI

PCIe x8 (4 lanes)

PCIe x16

Power Supply 24pin

Power Supply Monitoring

Frontpanel

CMOS Battery

PS/2 VGA, COM

USB USB, LAN

AudioUSB, LAN

Audio Input (CD type connector)

TechNotes D283x-S V1.2 Copyright 2009 FUJITSU LIMITED

Socket for USB Flash Drive(one USB channel)


D2836-S : Onboard Interface connectorsD2836-S : Onboard Interface connectors

Copyright 2007 FUJITSU LIMITED9

CPU Fan

Internal COM2

Chassis Fan

internal Socket for USB Stick

Chassis Fan

Chassis Fan

Internal S/P-DIF

Audio Frontpanel

Chassis Intrusion

LCD Status Display

Buzzer

4 x USB 2.0

6 x SATA24 x SDRAM DDR2

Parallel Port Connector

Floppy Connector

12V Supply for Processor

Socket LGA775

iQ45

ICH10-DO

4 x PCI

PCIe x8 (1 lane)

PCIe x16

Power Supply 24pin

Power Supply Monitoring

Frontpanel

CMOS Battery

PS/2 VGA, COM

USB USB, LAN

AudioUSB, LAN

Audio Input (CD type connector)

PCIe x1 (1 lane)

Socket for USB Flash Drive(one USB channel)

Connector SpecificationsConnector Specifications


Power LED:Anode: Pin 7/9 - 80R Pullup to 5V_AuxCathode: Pin 11 OD output (12mA)

Alert LED:Anode: Pin 13 - 100R Pullup to 3.3VCathode: Pin 15 OD output (13mA)

HDD LED:Anode: Pin 19 - 360R Pullup to 5VCathode: Pin 21 output (6mA)

Speaker Output:Differential audio signal (max. 1W / 8Ohm)


Internal Parallel Port Connector

Internal COM2 Connector



Internal USB Flash Drive Connector (1 port)

Internal USB Connector (2 x 2 ports)

Internal USB Stick Connector (1 port)




Note:

Standard connector bracket should directly connect to SPDIFout and GND pins (no signal converter required)

Sample S/PDIF Connector Bracket


Note: If a 3-wire fan is connected, but BIOS Setup is set to “4-Wire” (= Default) the fan willoperate at full speed (=12V).In 3-wire mode, the default minimum operating voltage is set to ~ 6V.

Minimum fan speed can be customized via SilentFanConfig-Manager tool! ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/IndustrialTools_D283x-S/

Fan3 Mode Configuration in BIOS Setup



Notes:

Pin 1, 3: SM-Bus; 3,3V; only to be used for devices powered by 3.3V Aux. Pin 7, 8: “Low Active”, max. 12mAPin 9: “Low Active”, max. 6mAPin 12, 13: “Low Active”, max. 10mA Pin 10: “Low Active”, max. 10mAPin 11: reserved, not used!Pin 14: 3,3V Auxiliary Voltage; specified for 100mA (protected by 750mA fuse)

LCD Configuration in BIOS Setup



Note: The intrusion supervision feature needs to be enabled in BIOS Setup first (Menu „Security“ „Cabinet Monitoring“). This BIOS option is only available if pin 3 („Intrusion Switch Present“) is connected to GND!


Chassis Intrusion

1 Intrusion Connector

Break Contact

Contact closed Chassis is openContact open Chassis is closed

Chassis intrusion is active even if the system is switched off (S5 state) or disconnected from mains power. The intrusion event is monitored by the Southbridge (ICH) and stored in the BIOS Eventlog during the next Boot.A timestamp (Boot date/time) will be added then. Note: This timestamp does not represent date/time of the intrusion event!

If a Supervisor Password is enabled in BIOS Setup, the system will stop during BIOS POST if an intrusion event has been detected. In order to continue, the Supervisor Password must be entered to confirm the intrusion event.

Note: - A Windows API to monitor the intrusion event is available- The intrusion event is transmitted via LAN ASF and can be monitored remotely by an appropriate ASF application


(D2831-S) (D2836-S)

Onboard Voltage Supervision (Voltage Guard)

Jumper removed = Supervision Enabled

In this case, all major onboard voltages are monitored by hardware comparators.If any voltage is out of range a system reset will be generated and the power supply (PSON) will be switchedoff. The system can be switched on again after AC power has been removed for several seconds.

Voltage GuardVoltage Guard


System MonitoringSystem Monitoring

• Temperature Sensors and Fans

• SystemGuard: Fan/Temperature Monitor• SilentFanConfig: Customize System Monitoring• Thermography D283x-S• Temperature Reference Points


FAN 1(CPU Fan, PWM)

CPU Sensor(inside Processor)

Sensor 2 (PCB rear side,below Northbridge)

Sensor 1 (inside Super I/O)

FAN 2 (PWM)

FAN 3 ***

Note: Do not attach more than one fan per connector!

FAN 4 (PWM)

*** FAN 3 PWM or 3-Wire selectable via BIOS

Setup (Default = PWM) Fan current max. 1A

System Monitoring

D2831-S: Temperature Sensors and Fans

System Monitoring



FAN 1(CPU Fan,

PWM)

CPU Sensor(inside Processor)

Sensor 2 (PCB rear side,

below Northbridge)

Sensor 1 (inside Super I/O)

FAN 2 (PWM)

FAN 4 (PWM)

Note: Do not attach more than one fan per connector!

FAN 3 ***

System Monitoring


System Monitoring


*** FAN 3 PWM or 3-Wire selectable via BIOS

Setup (Default = PWM) Fan current max. 1A


System Monitoring Tool:

• Visualize processor and sensor temperature data

• Display current speed for all attached fans

• User can configure fan aging control (menu “Special”)

• User can configure system watchdog (menu “Special”)

• User can adjust system behaviour via “Silent PC” / “Performance PC” slider by forced processor throttling

System Monitoring

D283x-S: SystemGuard

System Monitoring

D283x-S: SystemGuard


Temperature Sensors

Northbridge Sensor

Super I/O Sensor

Processor Sensor 1)

Sensor / Fan Matrix

All relevant System Monitoring parameters can be customized via SilentFanConfig-Tool!

• Indicates which sensor influences the specific fan speed

• Note: Characteristics for FAN1 is always dependent on the CPU temperature – fully controlled by the system BIOS. Due to safety reasons the influence of the CPU sensor for FAN1 cannot be disabled, but Sensor1 and / or Sensor2 can be activated in addition!

1) Note: As Intel has replaced the analogue processor „diode“ temperature measurement by the digital „PECI“ measurement (Platform Environment Control Interface) which does no longer provide the absolute processor temperature, SystemGuard can only display the processor´s temperature range.

System Monitoring D283x-S: SystemGuard - Details

System Monitoring D283x-S: SystemGuard - Details


• Windows-based System Management Configuration Tool

• Available for download: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/IndustrialTools_D283x-S/

• Use SilentFanConfig to adjust the required settings. • As result, SilentFanConfig creates a BIOS configuration file. Save file as "smco.in“

• Afterwards the “smco.in”-file needs to be flashed into the system BIOS by the DOS-tool "SMCO“: Copy smco.exe and smco.in to a DOS boot medium (USB-stick or USB- floppy or harddisk with DOS), boot on target platform and run following operation: smco smco.in

• New settings are written permanently to system BIOS

• Any BIOS update or BIOS Recovery will not reset the new settings

Note: SilentFanConfig V1.5 or higher required for D283x-S

System Monitoring SilentFanConfig: Customize System Monitoring

System Monitoring SilentFanConfig: Customize System Monitoring


Basic Fan Settings

Adjust minimum fan startup speed

BIOS default settings D283x-S:• 30% for all fans

Enable/disable mainboard fan speed control

BIOS default setting D283x-S:• Yes. Regulate fan speed…

Fan Ripple Count

BIOS default settings D283x-S:• 2 ripples per rotation

System Monitoring

SilentFanConfig: Fan Settings

System Monitoring

SilentFanConfig: Fan Settings


Basic Sensor Settings

BIOS default settings D283x-S:

Sensor1 (Super I/O)• Fan Start-Up: 40°C

• Fan Full-Speed: 60°C• Temperature Alert: 68°C

Sensor2 (Northbridge)• Fan Start-Up: 50°C

• Fan Full-Speed: 70°C• Temperature Alert: 72°C

Adjust related temperature settings

System Monitoring

SilentFanConfig: Basic Sensor Settings

System Monitoring

SilentFanConfig: Basic Sensor Settings


Global Settings

Note: Due to safety reasons the CPU sensor always influences Fan 1 (CPU), this cannot be changed by SilentFanConfig!

Adjust condition for “fan disconnected”

BIOS default settings D283x-S:• 300 rpm

Assign sensor influence

BIOS default settings D283x-S:• Fan1 controlled by CPU Sensor• Fan2, Fan2, Fan3 and Power Supply Fan controlled by CPU Sensor and Sensor1 (Super I/O) and Sensor2 (Northbridge)

System Monitoring

SilentFanConfig: Global Settings

System Monitoring

SilentFanConfig: Global Settings


Import / Export Settings

Create configuration file “smco.in”

for additional SMCO flash tool (DOS-based).

Customized System Management settings

can be flashed permanently into system BIOS.

System Monitoring

SilentFanConfig: Import / Export Settings

System Monitoring

SilentFanConfig: Import / Export Settings


- The related APIs provide access to the various System Management / System Monitoring features like

- Fan speed control- Adjust minimum fan speed- Onboard sensor temperatures- Temperature ALERT- System/Hardware Watchdog

- Windows-based API: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/IndustrialTools_D283x-S/BMC_Management-Controller-API/

- Linux-based Driver / API ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/Drivers_D283x-S/Linux/

Note: This driver currently supports Kernel 2.6.29 and 2.6.30

System Monitoring

System Monitoring Driver / API

System Monitoring

System Monitoring Driver / API


Operating Conditions:Circulating air max. 60°C

Usage 24h / 7 days

Extra Heatsink on Southbridge

.

Note: Power Consumption ICH10DO P max = 4.9W P idle = 1W

Efficient Heatsink on Northbridge

.

Note: Power ConsumptionQ45 P max = 17W

P idle = 6W

Quartz with enhancedoperating temperature range

COM Driver with enhancedoperating temperature range

All mainboard electrolyte capacitors: Polymer type only (= solid electrolyte)

COM Driver with enhancedoperating temperature range

Switched Voltage Regulator instead of Linear Regulator supporting 3-Wire FAN

(stable operation within full temperature range)

High Efficiency Processor Core Voltage Regulator

(> 85% @ 65W) for reduced thermal dissipation loss

(Sample picture: Processor Core Voltage Regulator)

Lx = effective endurance timeLo = endurance time @ 105°C (e.g. 2.000hrs)

to = 105°Ctx = capacitor surface temperature (e.g. 75°C)

Capacitor Endurance Time

Solid Electrolyte:

Fluid Electrolyte:

System Monitoring Components for continous operation @ 60°C

System Monitoring Components for continous operation @ 60°C


System Monitoring

Capacitor Endurance Time Comparison

System Monitoring

Capacitor Endurance Time Comparison


Processor fan/heat sink: EKL- 21510021064

System Monitoring

Thermography D283x-S

System Monitoring

Thermography D283x-S


System Monitoring

Thermography D2831-S

System Monitoring



System Monitoring


System Monitoring


FTP-Link to Climatic Test Report: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/Approvals&Testreports/Thermal-Testreport/


Reference Point Limit Temperatures (Component Surface) must not be exceeded!


Usage 24h / 7 days

Voltage Regulators max. 90°C

Inductors max. 90°C

Inductor max. 90°C

Southbridge Heatsink (chip surface) max. 75°C

Northbridge Heatsink(chip surface) max. 75°C

Battery max. 60/70°C 1)

1) Note: Battery operation is specified in temperature range up to 60°C. Operation between 60°C and 70°C may result in:- Higher self discharge rate- Decline of specified characteristics- Danger of leakage increases

Super I/O max. 70°C

LAN Controller max. 85°C

All Capacitors: max. 75°C

Clock Synthesizer max. 85°C

Synthesizer Quartz max. 70°C

Audio Codec max. 75°C


Voltage Regulators max. 90°C All Capacitors: max. 75°C

LAN Quartz max. 70°C


System Monitoring

Temperature Reference Points D2831-S

System Monitoring

Temperature Reference Points D2831-S


Reference Point Limit Temperatures (Component Surface) must not be exceeded!


Usage 24h / 7 days

Voltage Regulators max. 90°C


Inductor max. 90°C

Battery max. 60/70°C 1)

Super I/O max. 70°C

Clock Synthesizer max. 85°C

Synthesizer Quartz max. 70°C

Audio Codec max. 75°C

Voltage Regulators max. 90°C All Capacitors: max. 75°C


All Capacitors: max. 75°C


LAN Quartz max. 70°C


Northbridge Heatsink(chip surface) max. 75°C

Southbridge Heatsink (chip surface) max. 75°C

System Monitoring Temperature Reference Points D2836-S

System Monitoring Temperature Reference Points D2836-S

1) Note: Battery operation is specified in temperature range up to 60°C. Operation between 60°C and 70°C may result in:- Higher self discharge rate- Decline of specified characteristics- Danger of leakage increases


Power Supply RequirementsPower Supply Requirements

• ATX Power Supply• Typical Power Consumption


Connectors for ATX Power Supply

(1) 24 pin connector (ATX layout)(2) 4 pin connector (+12V, GND)

Note: The +12V supply (up to 12A) for processor and chipset is provided via the 4 pin connector! Onboard voltage regulators convert the +12V input power to the appropriate processor / chipset supply voltages.

(3) Processor Core Voltage Regulator: High Effciency Design (= 85% @ 65W) for enhanced power saving and less thermal dissipation loss.

(1)(2)

(3)

Requirements for ATX Power Supply

1) The ATX power supply should support the minimum load conditions as mentioned in the chart.If the new C3/C4 processor power states are used, theminimum load for +12V will be reduced to 0.1A!

The max. mainboard current in the chart doesn´t include the power for optional adapters and drives!


ATX Power Supply



Typical Power Consumption (AC mains power)

• Configuration: D2836-S 2 x 1GB DDR2-800 1 x HDD 160GB SATA ATX Power Supply “EPA 4.0-compliant / 80+” Windows XP

ProcessorXP „Idle“

C3/C4 disabled 1)

XP „Idle“C3/C4

enabled 1)

XP, Processor Load 50%



Celeron® 4502.2GHz , 35W

35W not supported 50W 53W 56W

Pentium® dual-coreE2160, 1.8GHz, 65W

35W not supported 50W 57W 62W

Core TM 2 DuoE8600, 3.33GHz, 65W

37W 28W 58W 71W 82W

Core TM 2 QuadQ9400, 2.66GHz, 95W

38W 28W 66W 83W 115W

Core TM 2 QuadQ9400S, 2.66GHz, 65W

36W 28W 58W 73W 98W

1) C3/C4 Processor Power States are disabled by default in BIOS Setup due to possible side-effects like reduced PCI performance. These Power States are only supported by the latest Core TM 2 Duo / Core TM 2 Quad processor series. In BIOS Setup, the appropriate setting is available in menu „Advanced“ „Enhanced Idle Power State”


Display OptionsDisplay Options

• DVI, VGA, HDMI


Analog (VGA) Monitor

max. VGA screen resolution: 2048x1536 / 32bit @ 75Hz

VGA

optional: Audio

Display Options

VGA Output

Display Options

VGA Output


max. DVI screen resolution:1920x1200 @ 60Hz

Note: DVI Adapter supports Single Link only!

DVI-D

Digital (DVI) Monitor

optional: Audio

via DVI-Adapter

Display Options

DVI Output

Display Options

DVI Output


max. HDMI screen resolution:1920 x 1200 @ 60Hz

HDMI transfers Video & Audio

HDMI

Digital (HDMI) Monitor

via DVI-Adapter & HDMI Connector

HDMI Audio Deviceneeds to be enabled

via Control Panel!

Display Options

HDMI Output

Display Options

HDMI Output


VGA

DVI-D or HDMI

Analog (VGA) Monitor and Digital (DVI or HDMI) Monitor Dual Independent Display / Extended Desktop

Display Options

Dual Display Output

Display Options

Dual Display Output

TechNotes D283x-S V1.2 Copyright 2009 FUJITSU LIMITED

D2823-A (SFF slot bracket) D2823-B (ATX slot bracket

Specification Single DVI-D extension adapter Supports Single-Link DVI Onboard VGA connector still useable ATX / LowProfile I/O connector bracket Supported by mainboard D2811-A /

D2812-A / D2831-S / D2836-S / D2841-A

No drivers required Adapter requires BIOS support which

may not be a provided by non-FSC mainboards

45

Display Options – DVI-D AdapterDisplay Options – DVI-D Adapter


Operating System SupportOperating System Support

• Windows ® XP / VISTA• Windows® XP Embedded• Linux


• Mainboard D283x-S is designed according to the Microsoft Guidelines for Windows XP and Windows VISTA

• MS certified drivers are available via OEM DU-DVD and OEM FTP Server

ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/Drivers_D283x-S/

Operating System Support

Support for Windows® XP / VISTA


Support for Windows® XP / VISTA


Conditions

• Customer is familiar with XP Embedded & Target Designer / Component Designer

• Customer creates specific XP Embedded SW installation at his own responsibility & risk

FSC provides Board Support Package (SLD files incl. drivers for D283x-S onboard components)

• Drivers contain english language version

• SLD files have no license restrictions

• Complete BSP is available via OEM FTP Serverftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/Drivers_D283x-S/


Support for Windows® XP Embedded


Support for Windows® XP Embedded


1) Kernel parameter PCI=nommconf required2) Only one LAN port supported, second LAN port requires driver from latest vanilla kernel3) Feasible driver available in latest vanilla kernel4) Feasible driver available here: http://forgeftp.novell.com/driver-process/staging/pub/update/realtek/sle10sp2/common/5) AHCI disabled; SATA compatible mode only6) VESA driver required

Basic OS Installation

HDD / DVD Read/Write

AccessGraphics LAN 2nd LAN Sound

openSUSE 10.3, 32 Bit OK 1) OK OK OK fail 2) fail 3)

openSUSE 10.3, 64 Bit OK 1) OK OK OK fail 2) fail 3)

openSUSE 11.0, 32 Bit OK OK OK fail 3) fail 3) OKopenSUSE 11.0, 64 Bit OK OK OK OK OK OK

SUSE Linux Enterprise 10 SP2, 32 Bit OK OK OK OK 4) OK 4) OKSUSE Linux Enterprise 10 SP2, 64 Bit OK OK OK OK 4) OK 4) OK

Fedora 9, 32 Bit OK OK OK OK fail 2) OKFedora 9, 64 Bit OK OK OK OK fail 2) OK

Red Hat Enterprise Linux 5.2, 32 Bit OK OK OK OK fail 2) OKRed Hat Enterprise Linux 5.2, 64 Bit OK OK OK OK fail 2) OK

Debian Etch, 32 Bit OK 1,5) OK OK 6) OK fail 2) fail 3)

Debian Etch, 64 Bit OK 1,5) OK OK 6) OK fail 2) fail 3)

Debian Lenny, 32 Bit OK OK OK OK OK OKDebian Lenny, 64 Bit OK OK OK OK OK OK

Ubuntu 7.1, 32 Bit OK OK OK fail 3) fail 3) fail 3)

Ubuntu 7.1, 64 Bit OK OK OK OK fail 2) fail 3)

Ubuntu 8.04, 32 Bit OK OK OK OK fail 2) OKUbuntu 8.04, 64 Bit OK OK OK OK OK OK


Support for Linux OS


Support for Linux OS


MiscellaneousMiscellaneous

• Additional Notes & Possible Restrictions• System Watchdog


• Harddisk PasswordThe current system BIOS doesn´t support the HDD password in AHCI- and RAID-mode Full HDD password support will be offered by BIOS > R1.02

• BIOS Recovery AC mains power needs to be unplugged before and after a BIOS Recovery

• Boot from USB Stick or USB HDDIf the BIOS Setup option “Force USB Stick Boot” is enabled, the system will only boot from (any) USB Stick or USB HDD. All other devices will be excluded from the “Boot priority order”.This feature can be used to enable automatic updates whenever an appropriate USB Stickor USB HDD is attached before system boot.The default setting is “disabled”

Miscellaneous

Additional Notes & Possible Restrictions

Miscellaneous



• LAN LEDs The rear LAN LED's are off in ACPI system states S3 - S5 (Limitation of Realtek LAN controller)

• BIONVD Tool (Change BIOS Setup Defaults) Some BIOS Setup parameters can’t be fixed via BIONVD tool.An updated toolset supporting all parameters is expected for BIOS > R1.02

• Enhanced Idle Power State The system BIOS provides support for the latest C3/C4 processor power saving modes (“Enhanced Idle Power State” = disabled in BIOS Setup by default!). Usage of C3/C4 requires appropriate support of the power supply (e.g. min. load 0.1A@+12V)

Note: If C3/C4 support is enabled, the PCI performance may be reduced!

Miscellaneous


Miscellaneous



D283x-S provides an independent HW Watchdog (integrated in System Management Controller)

Watchdog Programming:

Miscellaneous

System Watchdog

Miscellaneous

System Watchdog

- Via watchdog option in SystemGuard software Select Watchdog feature in folder “Special”! SystemGuard provides the trigger for the Watchdog within the specified schedule. If Windows “hangs”, the Watchdog will force the system to reboot.

- Via Windows-based API: ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/IndustrialTools_D283x-S/BMC_Management-Controller-API/

- Via Linux-based Driver / API ftp://ftp.ts.fujitsu.com/pub/Mainboard-OEM-Sales/Products/Mainboards/Industrial&ExtendedLifetime/D2831-S_D2836-S/Drivers_D283x-S/Linux/

Note: This driver currently supports Kernel 2.6.29 and 2.6.30

mainboard oem sales - 05/2009 technotes v1.2 major changes vs. v1.0: -layout updated; ftp links...

Documents

d2831s d2836s ftp

technotes v1

com usb usb

port internal usb connector

usb channel slide

fujitsu limited socket

lan audio usb

features page