maintenance, repair and overhaul solutions guide & product
TRANSCRIPT
Maintenance, Repair and OverhaulSolutions Guide & Product Selector
Making The Right Choice… For every industrial maintenance, repair and overhaul challenge, Loctite® products have the right solution.
Designed to extend equipment life, increase production reliability and prevent common failures, the Loctite® product range is a maintenance professionals most valuable tool.
Proven with over 50 years industrial experience, typical product applications include;• Securely lock any threaded fastener or fitting against vibration and shock load.• Seal and protect threaded joints and components from corrosion.• Instantly replace gaskets of any size or shape.• Retain bearings, bushes and cylindrical parts into housings or onto shafts - even if worn.• Protect metal parts from corrosion, galling and seizing.• Permanently and quickly bond a wide variety of materials.• Make emergency repairs to burst pipes and tanks.• Clean, degrease and convert rust.
More Than A Product…Our highly experienced Loctite® Application Engineers are committed to providing the highest level of technical and product support in the industry.
Working closely with our local industrial suppliers, our Application Engineers provide full process support from problem solving to onsite maintenance and product training.
Within this Solutions Guide & Product Selector you will find everything you need to know about Loctite® brand industrial grade products. Whether for an emergency repair or preventative maintenance, you will find it easy to select the Loctite® product you need. For further information visit our website www.loctite.com.au or call the Loctite® Customer Support Line 1300 88 55 56.
Committed To Innovation…From its founding in 1953, based on the world’s first anaerobic product, Loctite® has achieved success through innovation. An unrelenting commitment to continuous research and development has resulted in the most technically advanced range of industrial maintenance products available today. Products that increase equipment reliability, reduce costs and improve quality throughout industry. Here are some of our newest innovations featured throughout this catalogue.
Loctite® Sticks
The quality and performance you trust in a new and more convenient semi-solid stick formula. These patented new stick products offer greater flexibility for tougher applications, especially overhead, under or around machinery, and on components that can not be moved. They’re compact, making them easy to carry from job to job and easy to store in a tool box, tool belt or pocket. The semi-solid formula means that they won’t spill or leak. Now available in an expanded range including two threadlockers, a pipe sealant, an anti-seize and primer.
Loctite® Reliability with a twist!
Threadlockers and Thread Sealants
Introducing the Loctite® 243 and Loctite® 263. Formulated to deliver best performance on active and passive metals, increased oil tolerance and improved high temperature performance.
Loctite® Freeze & Release
The solution for releasing seized or corroded parts – SHOCK FREEZE. Loctite® Freeze & Release instantly chills seized and rusted parts (bolts, nuts, studs). The exceptional shock freeze effect causes microscopic cracks in the layer of rust, allowing the lubricating ingredient to wick directly into the rust by capillary action. The assembly can be easily dismantled after allowing 1-2 minutes reaction time. Released parts remain lubricated and protected from corrosion. (Refer to page 26 for more details).
2 | Maintenance, Repair and Overhaul Solutions Guide
TABLE OF CONTENTS
ThReadlOckinG Prevent fastener loosening and seizure
ThRead SealinG Prevent leaks – air, hydraulic
GaSkeTinG Prevent flange leaks – oil, transmission, coolant
ReTaininG Prevent backlash – keyway wallow, spun bearings, shaft misalignment, wear, corrosion
anTi-Seize lubRicanTS Prevent rust, corrosion, galling or seizing on metal parts in extreme environments
inSTanT bOndinG Bond dissimilar parts quickly and easily
STRucTuRal bOndinG Bond structural assemblies and repair damaged parts
PRiMeRS and acTiVaTORSActivates inactive surfaces
RuST TReaTMenT and cleaninGStabilize existing rust, guard against corrosion
SPecialTy and eMeRGency RePaiR kiTS
Technical RefeRenceS
aPPlicaTiOn PROceduReS
fluid cOMPaTibiliTy chaRT
4
7
10
13
16
19
22
24
26
28
30
31
34
ThReaDLOcKinGlocking of threaded fasteners » PREVENTS LOOSENING FROM SHOCK AND VIBRATION » SINGLE COMPONENT – CLEAN AND EASy TO APPLy » CAN BE USED ON VARIOUS SIZES OF FASTENERS – REDUCES INVENTORy COSTS » SEALS THREADS » STOPS RUST AND CORROSION
aRe The PaRTS aLReaDY aSSeMBLeD?
nO YeS
What strength do you require?
Low – Purple Medium – Blue high - Red Very high - Red Medium/high - Green
easy Disassembly improved Oil Tolerance Stick applicator improved Oil Tolerance Stick applicator high Thermal Stability Very high Strength Wicking Grade
use on all Metals Overhead applications use on all Metals no Mess high chemical Resistance Fills Porosity in Welds / castings
henKeL SOLuTiOnS LOcTiTe® 222 LOcTiTe® 243 LOcTiTe® 248 LOcTiTe® 263 LOcTiTe® 268 LOcTiTe® 272 LOcTiTe® 277 LOcTiTe® 290
fastener Size up to 36mm (M12) up to 36mm (M36) up to 20mm (M20) up to 36mm (M36) up to 20mm (M20) up to 36mm (M36) M25 and larger up to 12mm (M12)
colour Purple blue blue Red Red Red / Orange Red Green
Strength low Medium Medium high high high high Medium/high
fixture Time# 20 min 10 min 5 min 10 min 5 min 60 min 30 min 20 min
full Strength# 24 hrs 24 hrs 24 hrs 24 hrs 72 hrs 24 hrs 24 hrs 6 hrs
breakloose Torque# nm (lb.in.) 14 (120) 24 (210) 20 (177) 39 (345) 37 (330) 23 (200)* 38 (340) 30 (270)
Prevailing Torque# nm (lb.in.) 14 (120) 4 (35) - 25 (220)1 - 25 (220)* 40 (350) 40 (350)
Temperature Range -54ºc to +150ºc -54ºc to +180ºc -54ºc to +150ºc -54ºc to +180ºc -54ºc to +150ºc -54ºc to +232ºc -54ºc to +150ºc -54ºc to +150ºc
Recommended Primer 7471/7088 7649/7088 7649/7471 7471 7471 7649/7471 7649 7649
disassembly Method hand Tool hand Tool hand Tool direct heat direct heat direct heat direct heat direct heat
Package Size & idh10 ml bottle - 47166050 ml bottle - 231499
250 ml bottle - 1496888
10 ml bottle - 131137550 ml bottle - 1311321
250 ml bottle - 131132319 g stick - 933728
10 ml bottle - 137424150 ml bottle - 1331618
250 ml bottle - 133153619 g stick - 933730 50 ml bottle - 88442
50 ml bottle - 232658250 ml bottle - 1496860
10 ml bottle - 117522950 ml bottle - 1496855250 ml bottle - 1225613
# m10 steel nut & bolt, cured for 24 hours @ 22ºC and pre-torqued to 5nm.* Breakaway torque. For further information refer to product technical
data sheet. 1 Prevailing torque measured as per Iso 10964
Recommended for low strength threadlocking of adjusting screws, counter sunk head screws and set screws; on collars, pulleys, tool holders, and controllers.
High performance on various metals, even without use of a primer. Improved reliability in high temperature applications and on oil contaminated surfaces.
Medium strength semi-solid stick applicator ideal for hard to reach applications. Recommended for fastener applications where removal is required.
High performance on various metals, even without use of a primer. Improved reliability in high temperature applications and on oil contaminated surfaces.
High strength semi-solid stick applicator ideal for hard to reach places. Recommended for heavy duty applications such as transmission bolts and construction equipment.
High temperature threadlocker with outstanding chemical resistance. Suitable for sealing most refrigerants.
Very high strength threadlocker with outstanding chemical resistance.
Recommended for locking pre-assembled fasteners such as instrument screws, electrical connectors and setscrews.
Refer to page 31 for Application Procedures.
4 | Maintenance, Repair and Overhaul Solutions Guide
aRe The PaRTS aLReaDY aSSeMBLeD?
nO YeS
What strength do you require?
Low – Purple Medium – Blue high - Red Very high - Red Medium/high - Green
easy Disassembly improved Oil Tolerance Stick applicator improved Oil Tolerance Stick applicator high Thermal Stability Very high Strength Wicking Grade
use on all Metals Overhead applications use on all Metals no Mess high chemical Resistance Fills Porosity in Welds / castings
henKeL SOLuTiOnS LOcTiTe® 222 LOcTiTe® 243 LOcTiTe® 248 LOcTiTe® 263 LOcTiTe® 268 LOcTiTe® 272 LOcTiTe® 277 LOcTiTe® 290
fastener Size up to 36mm (M12) up to 36mm (M36) up to 20mm (M20) up to 36mm (M36) up to 20mm (M20) up to 36mm (M36) M25 and larger up to 12mm (M12)
colour Purple blue blue Red Red Red / Orange Red Green
Strength low Medium Medium high high high high Medium/high
fixture Time# 20 min 10 min 5 min 10 min 5 min 60 min 30 min 20 min
full Strength# 24 hrs 24 hrs 24 hrs 24 hrs 72 hrs 24 hrs 24 hrs 6 hrs
breakloose Torque# nm (lb.in.) 14 (120) 24 (210) 20 (177) 39 (345) 37 (330) 23 (200)* 38 (340) 30 (270)
Prevailing Torque# nm (lb.in.) 14 (120) 4 (35) - 25 (220)1 - 25 (220)* 40 (350) 40 (350)
Temperature Range -54ºc to +150ºc -54ºc to +180ºc -54ºc to +150ºc -54ºc to +180ºc -54ºc to +150ºc -54ºc to +232ºc -54ºc to +150ºc -54ºc to +150ºc
Recommended Primer 7471/7088 7649/7088 7649/7471 7471 7471 7649/7471 7649 7649
disassembly Method hand Tool hand Tool hand Tool direct heat direct heat direct heat direct heat direct heat
Package Size & idh10 ml bottle - 47166050 ml bottle - 231499
250 ml bottle - 1496888
10 ml bottle - 131137550 ml bottle - 1311321
250 ml bottle - 131132319 g stick - 933728
10 ml bottle - 137424150 ml bottle - 1331618
250 ml bottle - 133153619 g stick - 933730 50 ml bottle - 88442
50 ml bottle - 232658250 ml bottle - 1496860
10 ml bottle - 117522950 ml bottle - 1496855250 ml bottle - 1225613
# m10 steel nut & bolt, cured for 24 hours @ 22ºC and pre-torqued to 5nm.* Breakaway torque. For further information refer to product technical
data sheet. 1 Prevailing torque measured as per Iso 10964
Recommended for low strength threadlocking of adjusting screws, counter sunk head screws and set screws; on collars, pulleys, tool holders, and controllers.
High performance on various metals, even without use of a primer. Improved reliability in high temperature applications and on oil contaminated surfaces.
Medium strength semi-solid stick applicator ideal for hard to reach applications. Recommended for fastener applications where removal is required.
High performance on various metals, even without use of a primer. Improved reliability in high temperature applications and on oil contaminated surfaces.
High strength semi-solid stick applicator ideal for hard to reach places. Recommended for heavy duty applications such as transmission bolts and construction equipment.
High temperature threadlocker with outstanding chemical resistance. Suitable for sealing most refrigerants.
Very high strength threadlocker with outstanding chemical resistance.
Recommended for locking pre-assembled fasteners such as instrument screws, electrical connectors and setscrews.
Maintenance, Repair and Overhaul Solutions Guide | 5
ThReaDLOcKinGInvented as a revolutionary method to lock and seal threaded fasteners, Loctite® brand anaerobic threadlockers have found wide acceptance in a range of applications – from delicate electronic components to heavy construction equipment. Loctite® brand threadlockers are available in varying viscosities and strengths for virtually any application, including exposure to extreme environments.
FeaTuReS & BeneFiTS
Prevents Loosening of Fasteners – Sets to a thermoset plastic that fills microscopic gaps between interfacing threads preventing any movement.
Seals against corrosion – Seals the joint preventing ingress of moisture and other corrosive gases, chemicals and fluids.
Provides correct Lubricity – Lubrication properties yield controlled torque tension curves - ideal for assembly of equipment to specified torque values.
controlled Strengths – Available in varied controlled strengths to suit all applications – low, medium and high.
Suitable for all Fastener Sizes – Eliminates the need to hold stock of expensive mechanical fasteners.
easy to apply – Simply apply to the thread and assemble. Excess will not cure and can be easily wiped away.
DiD YOu KnOW?
how does an anaerobic adhesive work?
Anaerobic adhesives are single-component materials which cure at room temperature when deprived of contact with oxygen.
Curing begins when the two metal parts are mated together and any adhesive outside of the joint or thread remains liquid.
The capillary effect of the anaerobic liquid adhesive carries it into even the smallest gaps to fill the joint.
The cured adhesive is then ‘keyed’ to the surface roughness of the parts forming a tough thermoset plastic, which bonds the components and seals against moisture or chemical attack.
LIQUID SOLID
Prior to assembly After assembly
air
Cure
Chemical reaction
air
Refer to page 31 for Application Procedures.
6 | Maintenance, Repair and Overhaul Solutions Guide
ThReaD SeaLinGLoctite® brand liquid thread sealants seal and secure metal pipes and fittings, filling the space between threaded metal parts and curing to prevent leakage. Designed for low and high pressure applications, liquid thread sealants seal instantly for low pressure testing. When fully cured, they seal to the burst strength of most piping systems.
FeaTuReS & BeneFiTS
complete Seal – Fills voids between threads creating a 100% seal, preventing leakage caused by vibrational loosening, temperature cycling, corrosion and extreme pressures.
Locks & Seals in any Position – Seals independent of assembly torque allowing correct alignment of fittings.
Does not Block Pipe System – Uncured anaerobic sealant is completely soluble in hydraulic fluid, diesel oils, petrols and most industrial chemicals.
instant Low Pressure Seal – Suitable for immediate operation or low pressure testing of newly sealed threads.
Lubricates During assembly – Eliminates risk of overstressing fittings or castings, common with alternative thread sealing methods.
easy application & Disassembly – Simply apply directly to the thread and assemble. Excess sealant can be wiped away without solvents or chemicals. Disassembled with hand tools.
Replaces most tapes and hemp/paste combinations.
DiD YOu KnOW?
Industry loses millions of dollars annually due to leakage of fluids through pipe and tubing. Loctite® brand sealants prevent fluid loss, minimising cost of wastage, maintenance and down-time.
The table below details the significant potential cost of a leaking hydraulic fitting over a one year period.
Leakage Rate Loss per Loss per annual Day (ltr) Year (ltr) cost ($/Year)
One drop in 10 sec. 0.56 204.98 $1,025
One drop in 5 sec. 1.12 409.97 $2,050
One drop per sec. 5.62 2049.84 $10,250
Based on hydraulic Fluid: $5.00 / litre
Refer to page 32 for Application Procedures.
Maintenance, Repair and Overhaul Solutions Guide | 7
ThReaD SeaLinG
» REPLACES TAPES AND PASTES » LIQUIDS ENSURE COMPLETE CONTACT BETWEEN THREADS FOR A 100% SEAL » LIQUIDS WILL NOT CREEP, SHRINK, SHRED OR BLOCK SySTEMS (INCLUDING FILTERS) » DISASSEMBLy CAN BE ACHIEVED EASILy WITH BASIC HAND TOOLS
aRe The PiPe ThReaDS MeTaL OR PLaSTic?
Plastic (or Metal & Plastic) Metal Only
WhaT WiLL FLOW ThROuGh PiPeS? Water only hydraulic / Pneumatic General use Steam/Gas
WiLL OPeRaTinG PReSSuRe eXceeD 300KPa?
Yes no Yes
aRe The ThReaDS Fine OR cOaRSe? up to 100mm (4”) Fine - up to 19mm ( 3/4”) coarse - up to 25mm (1”) coarse - up to 25mm (1”) coarse - up to 76mm (3”) 76mm (3”)
WhaT aPPROVaLS aRe ReQuiReD? Potable Water/Gas Gas no no Potable Water/Gas Gas no
uniQue FeaTuReS allows Back off to align Fittings hot & cold Water Will not contaminate
critical assembles Locks Threads (25nm) Overhead applications Locks Thread (17nm) high Temperature +204ºc For Steam applications, high temperature
henKeL SOLuTiOnS LOcTiTe® 55 LOcTiTe® 5331 LOcTiTe® 569 LOcTiTe® 542 LOcTiTe® 561 LOcTiTe® 577 LOcTiTe® 567 PST™ LOcTiTe® 5770
description cord White Paste brown liquid brown Off White yellow White Off White
Maximum Thread Size 100mm (4”) 76mm (3”) 19mm (3/4”) 25mm (1”) 25mm (1”) 76mm (3”) 76mm (3”) 76mm (3”)
instant low Pressure Seal yes yes (up to 50kPa) no no yes yes yes yes
Temperature Range -54ºc to +150ºc -54ºc to +150ºc -54ºc to +150ºc -54ºc to +150ºc -54ºc to +150ºc -54ºc to +150ºc -54ºc to +204ºc -54ºc to +280ºc
disassembly Strength low low low Medium Medium Medium low high
Recommended Primer - - 7471/7649 7471/7649 7471/7649 7649 7649/7471 7471
Package Size & idh 150 m spool - 473136 100 ml tube - 14249250 ml bottle - 234473250 ml bottle - 234475
10 ml bottle - 47077150 ml bottle - 1560050
19 g stick - 94342850 ml tube - 229930250 ml tube - 281823
6 ml tube - 23445150 ml bottle - 473168
250 ml bottle - 23445350 ml tube - 1365034
*For further information refer to product technical data sheet.
Faster, more versatile pipe sealant which out-dates traditional tapes and hemp/pastes combinations. Provides an instant seal and allows back-off to align fittings.Approvals• Plumbing Safety
License AS/NZS 4020:2002 Cert No. 8638 (Potable Water)
• AGA Certificate 6007 to 2400kPa (Gas).
Recommended for use on low pressure threaded plastic or plastic/metal fi ttings carrying hot or cold water.Approvals• German DVGW No
96.07e125 (Gas & Potable Water)
• German KTW (Potable Water)
• WRC approved to 85ºC (Potable Water)
Recommended for fi ne threaded fi ttings as used in hydraulic and pneumatic applications.Approvals• AGA Certifi cate 3375 to
1050kPa (Gas)
Recommended for threaded fittings as used in hydraulic and pneumatic installations.Approvals• German DVGW No
96.02e125 (Gas & Potable Water)
• BS 6956 Type A (Gas)• WRC approved to 85ºC
(Potable Water)
Semi-solid stick formula offers added convenience and portability. Formulated for fast, reliable curing on metal, tapered pipe threads and fittings. Provides high pressure sealing at operating temperatures up to 150ºC.
Recommended for all coarse metal threads. Suitable for applications at low temperatures requiring fast cure.Approvals• Plumbing Safety
License AS/ NZS 4020:2002 Cert No. 20079 (Potable Water)
• AGA Certificate 4787 to 2600kPa (Gas)
Recommended for all coarse metal threads where slow cure is required to prolong time frame for adjusting valves and fittings.Approvals• AGA Certificate 3207 to
1050kPa (Gas)
High temperature thread sealant, designed to seal threaded pipe fittings in applications requiring continuous heat resistance of up to 280ºC.
Refer to page 32 for Application Procedures.
8 | Maintenance, Repair and Overhaul Solutions Guide
aRe The PiPe ThReaDS MeTaL OR PLaSTic?
Plastic (or Metal & Plastic) Metal Only
WhaT WiLL FLOW ThROuGh PiPeS? Water only hydraulic / Pneumatic General use Steam/Gas
WiLL OPeRaTinG PReSSuRe eXceeD 300KPa?
Yes no Yes
aRe The ThReaDS Fine OR cOaRSe? up to 100mm (4”) Fine - up to 19mm ( 3/4”) coarse - up to 25mm (1”) coarse - up to 25mm (1”) coarse - up to 76mm (3”) 76mm (3”)
WhaT aPPROVaLS aRe ReQuiReD? Potable Water/Gas Gas no no Potable Water/Gas Gas no
uniQue FeaTuReS allows Back off to align Fittings hot & cold Water Will not contaminate
critical assembles Locks Threads (25nm) Overhead applications Locks Thread (17nm) high Temperature +204ºc For Steam applications, high temperature
henKeL SOLuTiOnS LOcTiTe® 55 LOcTiTe® 5331 LOcTiTe® 569 LOcTiTe® 542 LOcTiTe® 561 LOcTiTe® 577 LOcTiTe® 567 PST™ LOcTiTe® 5770
description cord White Paste brown liquid brown Off White yellow White Off White
Maximum Thread Size 100mm (4”) 76mm (3”) 19mm (3/4”) 25mm (1”) 25mm (1”) 76mm (3”) 76mm (3”) 76mm (3”)
instant low Pressure Seal yes yes (up to 50kPa) no no yes yes yes yes
Temperature Range -54ºc to +150ºc -54ºc to +150ºc -54ºc to +150ºc -54ºc to +150ºc -54ºc to +150ºc -54ºc to +150ºc -54ºc to +204ºc -54ºc to +280ºc
disassembly Strength low low low Medium Medium Medium low high
Recommended Primer - - 7471/7649 7471/7649 7471/7649 7649 7649/7471 7471
Package Size & idh 150 m spool - 473136 100 ml tube - 14249250 ml bottle - 234473250 ml bottle - 234475
10 ml bottle - 47077150 ml bottle - 1560050
19 g stick - 94342850 ml tube - 229930250 ml tube - 281823
6 ml tube - 23445150 ml bottle - 473168
250 ml bottle - 23445350 ml tube - 1365034
*For further information refer to product technical data sheet.
Faster, more versatile pipe sealant which out-dates traditional tapes and hemp/pastes combinations. Provides an instant seal and allows back-off to align fittings.Approvals• Plumbing Safety
License AS/NZS 4020:2002 Cert No. 8638 (Potable Water)
• AGA Certificate 6007 to 2400kPa (Gas).
Recommended for use on low pressure threaded plastic or plastic/metal fi ttings carrying hot or cold water.Approvals• German DVGW No
96.07e125 (Gas & Potable Water)
• German KTW (Potable Water)
• WRC approved to 85ºC (Potable Water)
Recommended for fi ne threaded fi ttings as used in hydraulic and pneumatic applications.Approvals• AGA Certifi cate 3375 to
1050kPa (Gas)
Recommended for threaded fittings as used in hydraulic and pneumatic installations.Approvals• German DVGW No
96.02e125 (Gas & Potable Water)
• BS 6956 Type A (Gas)• WRC approved to 85ºC
(Potable Water)
Semi-solid stick formula offers added convenience and portability. Formulated for fast, reliable curing on metal, tapered pipe threads and fittings. Provides high pressure sealing at operating temperatures up to 150ºC.
Recommended for all coarse metal threads. Suitable for applications at low temperatures requiring fast cure.Approvals• Plumbing Safety
License AS/ NZS 4020:2002 Cert No. 20079 (Potable Water)
• AGA Certificate 4787 to 2600kPa (Gas)
Recommended for all coarse metal threads where slow cure is required to prolong time frame for adjusting valves and fittings.Approvals• AGA Certificate 3207 to
1050kPa (Gas)
High temperature thread sealant, designed to seal threaded pipe fittings in applications requiring continuous heat resistance of up to 280ºC.
Maintenance, Repair and Overhaul Solutions Guide | 9
GaSKeTinGSealing and flanges » NO SHIMMING EFFECT – CONTROLLED TOLERANCES, NO NEED FOR RE-TORQUING » FILL ALL VOIDS – REDUCE THE NEED FOR A FINE SURFACE FINISH OF FLANGES » PARTS CAN BE DISASSEMBLED EASILy EVEN AFTER EXTENDED SERVICE » RESISTS HIGH PRESSURE WHEN FULLy CURED
WhaT SiZe iS The GaP?
Less that 0.25mm (anaerobic Sealants) up to 6.0mm (Silicone Sealants)
iS The FLanGe RiGiD OR FLeXiBLe? Rigid (Metal to Metal) Flexible (Stamped Metal assemblies)
WhaT iS The FLanGe MaTeRiaL? Steel alloy/aluminium all Metals Metal or non-Metals
MaXiMuM TeMPeRaTuRe 150°c 150ºc 200ºc 200ºc 260ºc 315ºc
uniQue FeaTuReS use with Shims easy Disassembly high chemical Resistance Fast cure highly Flexible hot Oil Resistance Good electrical insulator high TemperatureResistance
henKeL SOLuTiOnS LOcTiTe® 515 LOcTiTe® 518 LOcTiTe® 510LOcTiTe® 5699
Grey Maxx®
LOcTiTe® 598Black Maxx®
LOcTiTe® 587Blue Maxx®
LOcTiTe® 5920copper Maxx® LOcTiTe® Superflex Red
Gasket Type formed in Place formed in Place formed in Place formed in Place formed in Place formed in Place formed in Place formed in Place
flange Type (elongation) Rigid Rigid Rigid flexible (100%) flexible (300%) flexible (350%) flexible (350%) flexible (300%)
Tack free Time# - - - 30 min 25 min 30 min 40 min 30 min
low Pressure Seal 30 min 20 min 30 min 30 min 40 min 30 min 40 min 30 min
Temperature Range -54ºc to +150ºc -54ºc to +150ºc -54ºc to +200ºc -60ºc to +200ºc -54ºc to +260ºc -60ºc to +260ºc -60ºc to +316ºc -60ºc to +315ºc
Oil Resistance excellent excellent excellent Good excellent excellent Good Good
Water/Glycol Resistance Good Good excellent Good Good Good Good Good
Sensor Safe yes yes yes yes yes yes yes yes
neutral cure - - - yes yes yes yes no
Recommended Primer 7649/7471 7649/7471 7649 - - - - -
Package Size & idh6 ml tube - 20975650 ml tube - 473169
300 ml cartridge - 265605
6 ml tube - 20975925 ml syringe - 1329465
50 ml tube - 472904300 ml cartridge - 135482
50 ml tube - 1496856250 ml tube - 1496883
95 g tube - 287301300 ml cartridge - 473152
95 g tube - 64017295 g tube - 332651
300 ml tube - 33394985 g tube - 287437
80 ml tube - 135507300 ml cartridge - 198817
# Varies with substrate. For further information refer to product technical data sheet.
Recommended for coating and re-using gaskets to improve sealing.Approvals• AGA certificate 2590 to
690kPa (Gas)
Recommended for use on rigid iron, steel and aluminium fl anges e.g. aluminium gearbox and engine castings, etc.
Recommended for use on rigid metal parts e.g. cast iron components and pump housings, etc. operating at high temperatures.Approvals• AGA certifi cate 2590 to
690kPa (Gas)
Designed for high torque applications. Remains flexible and withstands high vibration. Outstanding oil and shop fluid resistance. Non-corrosive, low odour.
Replacement for cork and paper cut gaskets on flanges and stamped sheet metal covers. Recommended for use where high vibration or flexing occurs. Can also be used with plastic parts. Oxygen sensor safe.
Recommended for sealing all types of flanges including stamped sheet metal where high flexibility and high oil or water glycol resistance is required. Oxygen sensor safe.
Single component RTV non-sag silicone paste for low volatility applications. Adheres to metal, glass, natural and synthetic fibres, wood, ceramics, and many plastic substrates. Oxygen sensor safe.
Recommended for sealing all of flanges including stamped sheet metal where high temperature resistance is required, e.g. assembly and repair of industrial furnaces, ovens, boilers, exhaust stacks and high temperature ducting.
Refer to page 33 for Application Procedures.
10 | Maintenance, Repair and Overhaul Solutions Guide
WhaT SiZe iS The GaP?
Less that 0.25mm (anaerobic Sealants) up to 6.0mm (Silicone Sealants)
iS The FLanGe RiGiD OR FLeXiBLe? Rigid (Metal to Metal) Flexible (Stamped Metal assemblies)
WhaT iS The FLanGe MaTeRiaL? Steel alloy/aluminium all Metals Metal or non-Metals
MaXiMuM TeMPeRaTuRe 150°c 150ºc 200ºc 200ºc 260ºc 315ºc
uniQue FeaTuReS use with Shims easy Disassembly high chemical Resistance Fast cure highly Flexible hot Oil Resistance Good electrical insulator high TemperatureResistance
henKeL SOLuTiOnS LOcTiTe® 515 LOcTiTe® 518 LOcTiTe® 510LOcTiTe® 5699
Grey Maxx®
LOcTiTe® 598Black Maxx®
LOcTiTe® 587Blue Maxx®
LOcTiTe® 5920copper Maxx® LOcTiTe® Superflex Red
Gasket Type formed in Place formed in Place formed in Place formed in Place formed in Place formed in Place formed in Place formed in Place
flange Type (elongation) Rigid Rigid Rigid flexible (100%) flexible (300%) flexible (350%) flexible (350%) flexible (300%)
Tack free Time# - - - 30 min 25 min 30 min 40 min 30 min
low Pressure Seal 30 min 20 min 30 min 30 min 40 min 30 min 40 min 30 min
Temperature Range -54ºc to +150ºc -54ºc to +150ºc -54ºc to +200ºc -60ºc to +200ºc -54ºc to +260ºc -60ºc to +260ºc -60ºc to +316ºc -60ºc to +315ºc
Oil Resistance excellent excellent excellent Good excellent excellent Good Good
Water/Glycol Resistance Good Good excellent Good Good Good Good Good
Sensor Safe yes yes yes yes yes yes yes yes
neutral cure - - - yes yes yes yes no
Recommended Primer 7649/7471 7649/7471 7649 - - - - -
Package Size & idh6 ml tube - 20975650 ml tube - 473169
300 ml cartridge - 265605
6 ml tube - 20975925 ml syringe - 1329465
50 ml tube - 472904300 ml cartridge - 135482
50 ml tube - 1496856250 ml tube - 1496883
95 g tube - 287301300 ml cartridge - 473152
95 g tube - 64017295 g tube - 332651
300 ml tube - 33394985 g tube - 287437
80 ml tube - 135507300 ml cartridge - 198817
# Varies with substrate. For further information refer to product technical data sheet.
Recommended for coating and re-using gaskets to improve sealing.Approvals• AGA certificate 2590 to
690kPa (Gas)
Recommended for use on rigid iron, steel and aluminium fl anges e.g. aluminium gearbox and engine castings, etc.
Recommended for use on rigid metal parts e.g. cast iron components and pump housings, etc. operating at high temperatures.Approvals• AGA certifi cate 2590 to
690kPa (Gas)
Designed for high torque applications. Remains flexible and withstands high vibration. Outstanding oil and shop fluid resistance. Non-corrosive, low odour.
Replacement for cork and paper cut gaskets on flanges and stamped sheet metal covers. Recommended for use where high vibration or flexing occurs. Can also be used with plastic parts. Oxygen sensor safe.
Recommended for sealing all types of flanges including stamped sheet metal where high flexibility and high oil or water glycol resistance is required. Oxygen sensor safe.
Single component RTV non-sag silicone paste for low volatility applications. Adheres to metal, glass, natural and synthetic fibres, wood, ceramics, and many plastic substrates. Oxygen sensor safe.
Recommended for sealing all of flanges including stamped sheet metal where high temperature resistance is required, e.g. assembly and repair of industrial furnaces, ovens, boilers, exhaust stacks and high temperature ducting.
Maintenance, Repair and Overhaul Solutions Guide | 11
GaSKeTinGLoctite® brand Anaerobic and Silicone gasketing solutions are suitable for small and large gap flange assemblies. Formed-in-place, they can be applied to any shape and offer improved seal reliability compared to traditional pre-cut compression gaskets.
FeaTuReS & BeneFiTS
anaerobic Gaskets
Loctite® brand anaerobic gaskets remain liquid when exposed to air, but cure when confined between mating flanges. Anaerobic gasketing products are best suited for small gap applications and rigid metal-to-metal assemblies.
Features and Benefits;
✓ No Shimming Effect - controlled tolerances, no need for re-torquing.
✓ Fills all voids reducing the need for fine surface finish on flanges.
✓ Does not shrink when cured.
✓ Parts can be easily disassembled even after extended service.
✓ Resists high pressure when fully cured.
Silicone Sealants
Loctite® brand silicone gasketing materials include unique products with excellent fluid and high temperature resistance. They are best suited for large gap applications and stamped metal assemblies where flange flexing occurs.
Features and Benefits;
✓ High gap fill and flexibility.
✓ High temperature and chemical resistance*.
DiD YOu KnOW?
What is a Formed-in-Place Gasket?
Formed-in-place gaskets are applied as a fluid sealant to one of the flange surfaces before the parts are assembled. When the parts are assembled the sealant spreads between the flanges, filling gaps, voids, scratches and surface irregularities.
After assembly the gasket cures and forms a durable seal.
Formed-in-place gaskets eliminate the inventory expense of stocking countless pre-cut gaskets.
how do you remove baked-on gasket material?
Loctite® Chisel® Paint Stripper easily removes pre-cut gasket cement and formed-in-place gaskets in 10-15 minutes. Simply spray on, then wipe or scrap off residual gasketing material.
(Refer to page 26 for further details).
*Refer to Technical Data Sheet
12 | Maintenance, Repair and Overhaul Solutions Guide
ReTaininGAccepted as a standard method for assembling press and slip parts, Loctite® anaerobic retaining compounds fill the ‘inner space’ between components and cure to form a strong precision assembly. Formulated in a wide variety of viscosities, gap fills, flexibility and strength characteristics, Loctite® anaerobic retaining compounds are suitable for a broad range of industrial maintenance applications.
FeaTuReS & BeneFiTS
increased assembly & Product Reliability – Prevents damage caused by press or shrink fits such as wallowing, backlash and fretting corrosion.
Fills all Voids & ensures 100% contact – Fills infinite microscopic imperfections that exists on even the most precisely machined surfaces, thereby providing 100% contact between mating parts, ensuring load and stress is distributed evenly over the joint.
creates Stronger industrial assemblies – Increases shear strength of mechanical assemblies and is suitable for a wider range of industrial applications from securing a metal locating pin to large diameter shaft bearings.
Seals against corrosion – Seals the assembly preventing ingress of moisture and other corrosive gases, chemicals and fluids.
Replaces or augments Mechanical assemblies – Reduces need for close tolerances, additional securing components and elaborate assembly methods, therefore reducing maintenance cost.
controlled Strengths – Available in high & moderate strengths formulations to suit all applications. Parts can be disassembled using regular processes.
DiD YOu KnOW?
interference fits typically have only 20-40% effective contact area!
Typically the contact area is limited to the peaks left behind by machining processes. Micro-movement during dynamic loading can shear these away, allowing the joint to fail. Tightening the machining tolerances to avoid this is a very expensive solution.
A Loctite® anaerobic retaining compound assures 100% contact, as well as eliminating “fretting corrosion” within the joint.
loctite® brand Retaining Compounds fill the microscopic peaks and valleys, ensuring maximum adhesion between mating surfaces
Maintenance, Repair and Overhaul Solutions Guide | 13
ReTaininGSecuring cylindrical assemblies » BOND NON-THREADED CyLINDRICAL METAL ASSEMBLIES » HIGH AND MODERATE STRENGTH PRODUCTS – CAN CARRy HIGH LOADS AND ELIMINATE
FRETTING » FILL ALL VOIDS – PREVENT CORROSION » REDUCE THE NEED FOR CLOSE TOLERANCES » 100% CONTACT – LOAD AND STRESS ARE DISTRIBUTED EVENLy OVER THE JOINT
WhaT SiZe iS The GaP?
Yes (Gaps to 0.25mm) no (Gaps to 0.25mm) Yes (Gaps to 0.5mm)
WhaT STRenGTh DO YOu ReQuiRe? Medium Medium/high high Medium high
MaXiMuM TeMPeRaTuRe 150°c 150°c 232°c 150°c
uniQue FeaTuReS easy Disassembly General Purpose Slow cure Quick cure Very high Temperature high Lubricity Repairs Worn Parts
henKeL SOLuTiOnS LOcTiTe® 641 LOcTiTe® 609 LOcTiTe® 635 LOcTiTe® 680 LOcTiTe® 620 LOcTiTe® 232 LOcTiTe® 660
colour yellow Green Green Green Green Opaque brown Metallic Grey
Strength Medium Medium high high high Medium Medium/high
fixture Time# 30 min 25 min 30 min 30 min 60 min 4–6 hrs 10 min
full Strength# 24 hrs 24 hrs 72 hrs 24 hrs 24 hrs 72 hrs 24 hrs
Gap fill# / Max Gap fill 0.05mm# / 0.25mm 0.15mm# / 0.25mm 0.05mm / 0.2mm 0.05mm# / 0.2mm 0.05mm# / 0.25mm 0.05mm 0.5mm (clearance)
compressive Shear Strength# n/mm2 (psi) 6.5 (940) 15.8 (2,290) >20 (2,900) 19.3 (2,800) 17.2 (2,495) 7.0 (1,015) 17.2 (2,490)
Temperature Range -54ºc to +150ºc -54ºc to +150ºc -54ºc to +150ºc -54ºc to +180ºc -54ºc to +232ºc -54ºc to +150ºc -54ºc to +150ºc
Recommended Primer 7471/7649 7649/7471 7471 7471 7649 7471/7649 7471
disassembly Method Pulley or Press Press Press Press Press Press Press
Package Size & idh10 ml bottle - 46909050 ml bottle - 1496859250 ml bottle - 1496874
10 ml bottle - 47131150 ml bottle - 234551
250 ml bottle - 234549
50 ml bottle - 135516250 ml bottle - 135517
50 ml bottle - 234950250 ml bottle - 234952
50 ml bottle - 234776250 ml bottle - 135515
250 ml bottle - 13817656 ml bottle - 473167
50 ml bottle - 473166
# steel pin & collar, cured for 24 hours @ 22ºC. * steel pin & collar cured for 2 hours @ 121ºC. For further information refer to product technical data sheet.
A controlled strength retaining compound, ideal for cylindrical parts that require disassembly; e.g. retention of bearings onto shafts and into housings.
Recommended as a general purpose, low viscosity retaining compound. Use to bond rotors to shafts, secure bushings and sleeves, and augment press fi ts.
Recommended for high strength retaining of parts with a clearance or interference fit, e.g. retaining bushes, bearings, seals, fans and liners.
Gives best resistance to dynamic, axial and radial loads. Recommended for retaining shafts, gears, pulleys, and similar cylindrical parts.Approvals• Plumbing Safety
License 4020:2002 Cert No. 8687 (Potable Water)
Recommended for high temperature retaining of parts with a clearance or interference fit, e.g. retaining bushes, bearings, seals, fans and liners.
Has lubricating properties to facilitate smooth assembly of heavy interference or high torque fits. Prevents galling and metal pick-up during assembly.
Used for repairing worn coaxial parts without re-machining. Enables reuse of worn bearing seats, keys, splines, tapers, or for retaining shims.
14 | Maintenance, Repair and Overhaul Solutions Guide
WhaT SiZe iS The GaP?
Yes (Gaps to 0.25mm) no (Gaps to 0.25mm) Yes (Gaps to 0.5mm)
WhaT STRenGTh DO YOu ReQuiRe? Medium Medium/high high Medium high
MaXiMuM TeMPeRaTuRe 150°c 150°c 232°c 150°c
uniQue FeaTuReS easy Disassembly General Purpose Slow cure Quick cure Very high Temperature high Lubricity Repairs Worn Parts
henKeL SOLuTiOnS LOcTiTe® 641 LOcTiTe® 609 LOcTiTe® 635 LOcTiTe® 680 LOcTiTe® 620 LOcTiTe® 232 LOcTiTe® 660
colour yellow Green Green Green Green Opaque brown Metallic Grey
Strength Medium Medium high high high Medium Medium/high
fixture Time# 30 min 25 min 30 min 30 min 60 min 4–6 hrs 10 min
full Strength# 24 hrs 24 hrs 72 hrs 24 hrs 24 hrs 72 hrs 24 hrs
Gap fill# / Max Gap fill 0.05mm# / 0.25mm 0.15mm# / 0.25mm 0.05mm / 0.2mm 0.05mm# / 0.2mm 0.05mm# / 0.25mm 0.05mm 0.5mm (clearance)
compressive Shear Strength# n/mm2 (psi) 6.5 (940) 15.8 (2,290) >20 (2,900) 19.3 (2,800) 17.2 (2,495) 7.0 (1,015) 17.2 (2,490)
Temperature Range -54ºc to +150ºc -54ºc to +150ºc -54ºc to +150ºc -54ºc to +180ºc -54ºc to +232ºc -54ºc to +150ºc -54ºc to +150ºc
Recommended Primer 7471/7649 7649/7471 7471 7471 7649 7471/7649 7471
disassembly Method Pulley or Press Press Press Press Press Press Press
Package Size & idh10 ml bottle - 46909050 ml bottle - 1496859250 ml bottle - 1496874
10 ml bottle - 47131150 ml bottle - 234551
250 ml bottle - 234549
50 ml bottle - 135516250 ml bottle - 135517
50 ml bottle - 234950250 ml bottle - 234952
50 ml bottle - 234776250 ml bottle - 135515
250 ml bottle - 13817656 ml bottle - 473167
50 ml bottle - 473166
# steel pin & collar, cured for 24 hours @ 22ºC. * steel pin & collar cured for 2 hours @ 121ºC. For further information refer to product technical data sheet.
A controlled strength retaining compound, ideal for cylindrical parts that require disassembly; e.g. retention of bearings onto shafts and into housings.
Recommended as a general purpose, low viscosity retaining compound. Use to bond rotors to shafts, secure bushings and sleeves, and augment press fi ts.
Recommended for high strength retaining of parts with a clearance or interference fit, e.g. retaining bushes, bearings, seals, fans and liners.
Gives best resistance to dynamic, axial and radial loads. Recommended for retaining shafts, gears, pulleys, and similar cylindrical parts.Approvals• Plumbing Safety
License 4020:2002 Cert No. 8687 (Potable Water)
Recommended for high temperature retaining of parts with a clearance or interference fit, e.g. retaining bushes, bearings, seals, fans and liners.
Has lubricating properties to facilitate smooth assembly of heavy interference or high torque fits. Prevents galling and metal pick-up during assembly.
Used for repairing worn coaxial parts without re-machining. Enables reuse of worn bearing seats, keys, splines, tapers, or for retaining shims.
Maintenance, Repair and Overhaul Solutions Guide | 15
anTi-SeiZe LuBRicanTS
» PROTECT AGAINST RUST, CORROSION, SEIZING AND GALLING » PROVIDE LUBRICATION IN EXTREME ENVIRONMENTS
WhaT TYPe OF anTi-SeiZe DO YOu ReQuiRe?
General Purpose Stainless Steel &Titanium applications Soft Metal applications incidental Food contact Silicone Lubricant Molybdenum-disulfi de
MaXiMuM TeMPeRaTuRe 870ºc 982ºc 1315ºc 1315ºc 400ºc 400ºc 205ºc -29°c to 400°c (sliding)-29°c to 1315°c (anti-seize)
uniQue FeaTuReS
Graphite & Metallic Flake Fortifi ed
Graphite & copper Fortifi ed
Graphite & nickel Fortifi ed Metal Free high corrosion
Resistance Metal Free Water & Steam Resistant heavy Duty
high Lubricity high Temperature Resistance
extreme chemical Resistance
extreme TemperatureResistance nSF approved electrical Resistance Static load will not
attract dirt or dust
henKeL SOLuTiOnS LOcTiTe® Silver Grade anti-Seize
LOcTiTe® c5-acopper anti-Seize
LOcTiTe® 771 nickelanti-Seize
LOcTiTe® heavyDuty anti-Seize
LOcTiTe® Zincanti-Seize
LOcTiTe® FoodGrade anti-Seize
LOcTiTe® SiliconeLubricant
LOcTiTe® Moly DryFilm
colour Silver copper Silver black dull Silver White Transparent Paste black
Solid lubricating agent aluminium / Graphite copper / Graphite nickel / Graphite calcium / Graphite zinc calcium Silicone Graphite
Torque coefficient (k value)* 0.18 0.16 0.1312.7mm steel bolts (Grade 8) and nuts
(Grade 5)0.15 - - 0.06 – 0.12
Temperature Range -29°c to 870°c -29°c to 982°c -29°c to 1315°c -29°c to 1315°c -29°c to 398°c -29°c to 400°c -29°c to 205°c-29°c to 400°c (sliding)
-29°c to 1315°c (anti-seize)
Metal free no no no yes no yes yes yes
Package Size & idh
20 g stick - 944870175 g aerosol - 471320
236 ml brushtop - 199012250 g tube - 471321
500 g brushtop - 5520915 kg bucket - 471322
453 g brushtop - 160796 500 g brushtop - 641488 510 g brushtop - 209758 454 g brushtop - 233507 226 g brushtop - 1198200150 g tube - 234317
290 g aerosol - 231009340 g aerosol - 473134
# Varies with substrate. For further information refer to product technical data sheet.
* K value based on 3/8” nut and bolt in skidmore-wilhem apparatus and tested in a wilhelm.
Heavy Duty, temperature resistant, petroleum based lubricant compound fortified with graphite and metal flake. Inert, will not evaporate or harden in extreme cold or heat. For use in assemblies up to 870ºC.Recommended for:• General purpose
machine and bolt assembly.
• Close tolerance assembly
• Fine threads and snug slip fits.
Exclusive formula suspends copper and graphite in a high quality grease. Protects metal parts from rust, corrosion, galling and seizing at temperatures to 982ºC.Recommended for:• Nuts, bolts and studs.• Fittings and shafts,
machine surfaces.• Fittings on steam
turbines, pumps and valves.
• Flanges, extruders and dies.
Copper free formulation with extreme chemical resistance, recommended for stainless steel and other metal fi ttings. Prevents corrosion, seizing and galling in harsh chemical environments at temperatures to 1315ºC.Recommended for:• Chemical plants and oil
refi neries.• Water and sewage
plants.• Environments where a
‘clean’ inert lubricant is needed.
Metal free formulation provides outstanding lubrication to all metals including stainless steel, aluminum and soft metals up to 1315ºC.Recommended for:• OEM specified turbine
studs and bolts.• Ethylene and acetylene
piping.• Petrochemical plants.• Environments
prohibiting the use of copper.
Smooth mixture of zinc dust and petrolatum grease that acts like an ‘internal galvaniser’ for superior protection of aluminum and ferrous surfaces from seizure and corrosion up to 400ºC.Recommended for:• Protecting aluminum,
aluminum alloy, and ferrous metal from seizing and corrosion.
Metal free formulation provides high levels of purity and excellent lubricating properties for use on equipments with incidental food contact at temperatures up to 400ºC.Recommended for:• Lubricating and
protecting parts in food processing plants, breweries, packaging plants and hospitals.
Non-curing silicone paste that seals, lubricates, protects, waterproofs, and electrically insulates metal, rubber, and plastic parts. Will not tarnish paint, rubber or plastic surfaces.Recommended for:• Plug or ball valve,
valve stem packing and protecting electrical contacts.
• Stopping leaks.
A molybdenum-disulfide based solid film lubricant. It is a heavy-duty lubricant used for general plant maintenance, metal working trade, machinery manufacturers and manufacturers of military and commercial jet engines.Recommended for:• Maintenance.• Production.• Aerospace.• Automotive, heavy
equipment.• Electrical.• Petro chemical.
16 | Maintenance, Repair and Overhaul Solutions Guide
WhaT TYPe OF anTi-SeiZe DO YOu ReQuiRe?
General Purpose Stainless Steel &Titanium applications Soft Metal applications incidental Food contact Silicone Lubricant Molybdenum-disulfi de
MaXiMuM TeMPeRaTuRe 870ºc 982ºc 1315ºc 1315ºc 400ºc 400ºc 205ºc -29°c to 400°c (sliding)-29°c to 1315°c (anti-seize)
uniQue FeaTuReS
Graphite & Metallic Flake Fortifi ed
Graphite & copper Fortifi ed
Graphite & nickel Fortifi ed Metal Free high corrosion
Resistance Metal Free Water & Steam Resistant heavy Duty
high Lubricity high Temperature Resistance
extreme chemical Resistance
extreme TemperatureResistance nSF approved electrical Resistance Static load will not
attract dirt or dust
henKeL SOLuTiOnS LOcTiTe® Silver Grade anti-Seize
LOcTiTe® c5-acopper anti-Seize
LOcTiTe® 771 nickelanti-Seize
LOcTiTe® heavyDuty anti-Seize
LOcTiTe® Zincanti-Seize
LOcTiTe® FoodGrade anti-Seize
LOcTiTe® SiliconeLubricant
LOcTiTe® Moly DryFilm
colour Silver copper Silver black dull Silver White Transparent Paste black
Solid lubricating agent aluminium / Graphite copper / Graphite nickel / Graphite calcium / Graphite zinc calcium Silicone Graphite
Torque coefficient (k value)* 0.18 0.16 0.1312.7mm steel bolts (Grade 8) and nuts
(Grade 5)0.15 - - 0.06 – 0.12
Temperature Range -29°c to 870°c -29°c to 982°c -29°c to 1315°c -29°c to 1315°c -29°c to 398°c -29°c to 400°c -29°c to 205°c-29°c to 400°c (sliding)
-29°c to 1315°c (anti-seize)
Metal free no no no yes no yes yes yes
Package Size & idh
20 g stick - 944870175 g aerosol - 471320
236 ml brushtop - 199012250 g tube - 471321
500 g brushtop - 5520915 kg bucket - 471322
453 g brushtop - 160796 500 g brushtop - 641488 510 g brushtop - 209758 454 g brushtop - 233507 226 g brushtop - 1198200150 g tube - 234317
290 g aerosol - 231009340 g aerosol - 473134
# Varies with substrate. For further information refer to product technical data sheet.
* K value based on 3/8” nut and bolt in skidmore-wilhem apparatus and tested in a wilhelm.
Heavy Duty, temperature resistant, petroleum based lubricant compound fortified with graphite and metal flake. Inert, will not evaporate or harden in extreme cold or heat. For use in assemblies up to 870ºC.Recommended for:• General purpose
machine and bolt assembly.
• Close tolerance assembly
• Fine threads and snug slip fits.
Exclusive formula suspends copper and graphite in a high quality grease. Protects metal parts from rust, corrosion, galling and seizing at temperatures to 982ºC.Recommended for:• Nuts, bolts and studs.• Fittings and shafts,
machine surfaces.• Fittings on steam
turbines, pumps and valves.
• Flanges, extruders and dies.
Copper free formulation with extreme chemical resistance, recommended for stainless steel and other metal fi ttings. Prevents corrosion, seizing and galling in harsh chemical environments at temperatures to 1315ºC.Recommended for:• Chemical plants and oil
refi neries.• Water and sewage
plants.• Environments where a
‘clean’ inert lubricant is needed.
Metal free formulation provides outstanding lubrication to all metals including stainless steel, aluminum and soft metals up to 1315ºC.Recommended for:• OEM specified turbine
studs and bolts.• Ethylene and acetylene
piping.• Petrochemical plants.• Environments
prohibiting the use of copper.
Smooth mixture of zinc dust and petrolatum grease that acts like an ‘internal galvaniser’ for superior protection of aluminum and ferrous surfaces from seizure and corrosion up to 400ºC.Recommended for:• Protecting aluminum,
aluminum alloy, and ferrous metal from seizing and corrosion.
Metal free formulation provides high levels of purity and excellent lubricating properties for use on equipments with incidental food contact at temperatures up to 400ºC.Recommended for:• Lubricating and
protecting parts in food processing plants, breweries, packaging plants and hospitals.
Non-curing silicone paste that seals, lubricates, protects, waterproofs, and electrically insulates metal, rubber, and plastic parts. Will not tarnish paint, rubber or plastic surfaces.Recommended for:• Plug or ball valve,
valve stem packing and protecting electrical contacts.
• Stopping leaks.
A molybdenum-disulfide based solid film lubricant. It is a heavy-duty lubricant used for general plant maintenance, metal working trade, machinery manufacturers and manufacturers of military and commercial jet engines.Recommended for:• Maintenance.• Production.• Aerospace.• Automotive, heavy
equipment.• Electrical.• Petro chemical.
Maintenance, Repair and Overhaul Solutions Guide | 17
anTi-SeiZe LuBRicanTSLoctite® brand Anti-Seize compounds are a range of premium quality products, developed to protect metal parts from corrosion, galling and seizing. They ease assembly and disassembly of slip fit and threaded joints, and reduce friction and wear. Formulated for severe environments, these products protect against high temperatures up to 1315ºC, in conjunction with heavy loads and chemical corrosion.
FeaTuReS & BeneFiTS
high Temperature Resistance – Formulated with high quality grease and solid lubricating agents for optimal temperature resistance up to 1315ºC.
Reduces Friction & Wear – Reduces metal-to-metal contact resulting in less friction and wear.
Seals against corrosion – Displaces and seals against contact with moisture and other corrosive liquids.
Metal Free available – For use in environments that prohibit use of copper or where dissimilar metals are used.
convenient Packaging & easy use – Available in tubs, tubes, aerosols and the patented stick applicator. Tubs include a brush attached to the lid for no-mess application.
DiD YOu KnOW?
effective anti-Seize lubricants increase assembly strength!
An anti-seize lubricant used on a bolt helps to develop greater clamp load for the same torque compared to an unlubricated bolt. However care should be taken to avoid over-stressing a bolt caused by excessive lubrication. Loctite® anti-seize products provide a controlled torque coefficient which ensures consistent clamp load when tightening.
anti-Seize lubricants act as an ‘internal Galvaniser’!
The use of an anti-seize product is an excellent method of preventing galvanic corrosion, especially in hot, acidic, or caustic environments. Anti-seizes resist galvanic attack by sacrificing the metals in the anti-seize in preference to the metal parts under protection.
18 | Maintenance, Repair and Overhaul Solutions Guide
inSTanT BOnDinGWILL REQUIRE AN INSTANT ADHESIVE OPENING STATEMENT
FeaTuReS & BeneFiTS
✓ Convenient bonding in seconds
✓ High shear strength
✓ No mixing
✓ Bonds to a wide variety of materials
✓ Extensive range available, suitable for infinite industrial maintenance and OEM applications.
PRODucT DeScRiPTiOn
Henkel Corporation, the manufacturer of Loctite® products, is the world leader of structural and instant adhesive bonding solutions. Our advanced adhesives range includes Cyanoacrylates, Epoxies, Hot Melts, Light Cure, Silicones, Urethanes and Acrylics for maintenance and OEM applications.
The Loctite® adhesive products shown here is a targeted selection of maintenance bonding solutions. Call the Loctite® Customer Support Line for more information on our full product range.
Maintenance, Repair and Overhaul Solutions Guide | 19
inSTanT BOnDinG
» ASSEMBLE PARTS QUICKLy AND EASILy » PEPAIR BROKEN PARTS » BOND DISSIMILAR MATERIALS
WhaT aRe YOu BOnDinG?
Plastics/Metals/Rubber Diffi cult to bond surfaces Rubber/Metal Plastics/Rubber Plastics/Metals/Rubber Plastics/Rubber
DO YOu ReQuiRe inSTanT aDheSiOn? Yes no Yes no
iS The SuRFace POROuS? non-Porous Porous non-Porous Porous
uniQue FeaTuReSinstant Fixture instant Fixture instant Fixture Rubber Toughened Bonds to ePDM Rubber Toughened Low Odor Two-part Gap Fill
Bonds Most Plastics no Run Formula high Peel Strength high Peel Strength Low Bloom
henKeL SOLuTiOnS LOcTiTe® 401 LOcTiTe® 406 LOcTiTe® 454 LOcTiTe® 480 LOcTiTe® 424 LOcTiTe® 435 LOcTiTe® 460 LOcTiTe® 3090
colour clear clear clear black clear clear clear clear
Gap fill 0.05mm 0.05mm 0.10mm 0.05mm 0.05mm 0.05mm 0.05mm 5mm
Viscosity (cP) 90 20 Gel 150 110 175 40 Gel
Shear Strength# n/mm2 (PSi) 20 (2,900) 15.5 (2,250) 20.9 (3,030) 26 (3,800) 22 (3,200) 19 (2,700) 21 (3,060) 21 (3,045)
Temperature Range -54ºc to +120ºc -54ºc to +120ºc -54ºc to +120ºc -54ºc to +100ºc -54ºc to +80ºc -54ºc to +100ºc -54ºc to +100ºc -54ºc to +80ºc
fixture Time 5–20 sec 5–20 sec 30–60 sec 60–120 sec 5–20 sec 30–60 sec 10–30 sec 30–60 sec
full Strength 24 hrs ≥24 hrs ≥24 hrs ≥24 hrs ≥24 hrs ≥24 hrs ≥24 hrs ≥24 hrs
Recommended Primer 770 770 - 770 770 770 770 770
Package Size & idh3 g tube - 547691
25 ml bottle - 265607
25 ml bottle - 265606100 ml bottle - 265619500 ml bottle - 265621
3 g tube - 23399820 g tube - 466862
200 g tube - 234004
20 g bottle - 1831562500 ml bottle - 135253
25 ml bottle - 26560925 ml bottle - 914156
500 ml bottle - 105584025 ml bottle - 473121
500 ml bottle - 93750110 g dual syringe- 1796029
# grit blasted mild steel cured for 24 hours at 22°C.
Designed for assembly of diffi cult-to-bond materials which require uniform stress distribution and strong tension and/or shear strength. Bonds a wide range of materials including metals, plastics and elastomers.
General purpose adhesive for diffi cult top bond surfaces. Bonds Santoprene® rubbers, polyolefi n plastics and elastomers when used in conjunction with Loctite® 770 Polyolefi n Primer.
General purpose gel for bonding metals, composite materials, wood, cork, foam, leather, card, paper, plaster and unglazed ceramics. Recommended for use on vertical or overhead surfaces. Fills gaps to 0.5mm with the use of Primer 7452.
Black rubber toughened grade for bonding metal to metal and metal to rubber; especially suitable with applications where high peel strength is required and/or shock loads are present.
Excellent for bonding EPDM rubber. Loctite® 424 provides enhanced performance on EPDM and elastomers.
Rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock. The product provides rapid bonding on a wide range of materials including metals, plastics and elastomers, as well as porous and absorbent materials like wood, leather and fabric.
Low odour and low blooming properties and is particularly suitable for applications where vapour control is difficult. This product provides rapid bonding of a wide range of materials including metals, plastics and elastomers. Loctite® 460 is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric.
Two component, fast curing, gap filling adhesive with excellent bonding characteristics to a variety of substrates including plastics, rubbers and metals. Loctite® 3090 is designed for the assembly of parts with varying or undefined band gaps. Loctite® 3090 is also suitable for bonding porous materials such as wood, paper, leather and fabric.
20 | Maintenance, Repair and Overhaul Solutions Guide
WhaT aRe YOu BOnDinG?
Plastics/Metals/Rubber Diffi cult to bond surfaces Rubber/Metal Plastics/Rubber Plastics/Metals/Rubber Plastics/Rubber
DO YOu ReQuiRe inSTanT aDheSiOn? Yes no Yes no
iS The SuRFace POROuS? non-Porous Porous non-Porous Porous
uniQue FeaTuReSinstant Fixture instant Fixture instant Fixture Rubber Toughened Bonds to ePDM Rubber Toughened Low Odor Two-part Gap Fill
Bonds Most Plastics no Run Formula high Peel Strength high Peel Strength Low Bloom
henKeL SOLuTiOnS LOcTiTe® 401 LOcTiTe® 406 LOcTiTe® 454 LOcTiTe® 480 LOcTiTe® 424 LOcTiTe® 435 LOcTiTe® 460 LOcTiTe® 3090
colour clear clear clear black clear clear clear clear
Gap fill 0.05mm 0.05mm 0.10mm 0.05mm 0.05mm 0.05mm 0.05mm 5mm
Viscosity (cP) 90 20 Gel 150 110 175 40 Gel
Shear Strength# n/mm2 (PSi) 20 (2,900) 15.5 (2,250) 20.9 (3,030) 26 (3,800) 22 (3,200) 19 (2,700) 21 (3,060) 21 (3,045)
Temperature Range -54ºc to +120ºc -54ºc to +120ºc -54ºc to +120ºc -54ºc to +100ºc -54ºc to +80ºc -54ºc to +100ºc -54ºc to +100ºc -54ºc to +80ºc
fixture Time 5–20 sec 5–20 sec 30–60 sec 60–120 sec 5–20 sec 30–60 sec 10–30 sec 30–60 sec
full Strength 24 hrs ≥24 hrs ≥24 hrs ≥24 hrs ≥24 hrs ≥24 hrs ≥24 hrs ≥24 hrs
Recommended Primer 770 770 - 770 770 770 770 770
Package Size & idh3 g tube - 547691
25 ml bottle - 265607
25 ml bottle - 265606100 ml bottle - 265619500 ml bottle - 265621
3 g tube - 23399820 g tube - 466862
200 g tube - 234004
20 g bottle - 1831562500 ml bottle - 135253
25 ml bottle - 26560925 ml bottle - 914156
500 ml bottle - 105584025 ml bottle - 473121
500 ml bottle - 93750110 g dual syringe- 1796029
# grit blasted mild steel cured for 24 hours at 22°C.
Designed for assembly of diffi cult-to-bond materials which require uniform stress distribution and strong tension and/or shear strength. Bonds a wide range of materials including metals, plastics and elastomers.
General purpose adhesive for diffi cult top bond surfaces. Bonds Santoprene® rubbers, polyolefi n plastics and elastomers when used in conjunction with Loctite® 770 Polyolefi n Primer.
General purpose gel for bonding metals, composite materials, wood, cork, foam, leather, card, paper, plaster and unglazed ceramics. Recommended for use on vertical or overhead surfaces. Fills gaps to 0.5mm with the use of Primer 7452.
Black rubber toughened grade for bonding metal to metal and metal to rubber; especially suitable with applications where high peel strength is required and/or shock loads are present.
Excellent for bonding EPDM rubber. Loctite® 424 provides enhanced performance on EPDM and elastomers.
Rubber toughened adhesive with increased flexibility and peel strength along with enhanced resistance to shock. The product provides rapid bonding on a wide range of materials including metals, plastics and elastomers, as well as porous and absorbent materials like wood, leather and fabric.
Low odour and low blooming properties and is particularly suitable for applications where vapour control is difficult. This product provides rapid bonding of a wide range of materials including metals, plastics and elastomers. Loctite® 460 is particularly suited for bonding porous or absorbent materials such as wood, paper, leather and fabric.
Two component, fast curing, gap filling adhesive with excellent bonding characteristics to a variety of substrates including plastics, rubbers and metals. Loctite® 3090 is designed for the assembly of parts with varying or undefined band gaps. Loctite® 3090 is also suitable for bonding porous materials such as wood, paper, leather and fabric.
Maintenance, Repair and Overhaul Solutions Guide | 21
STRucTuRaL BOnDinG
» ELIMINATES OR SIGNIFICANTLy REDUCES COSTLy MECHANICAL FASTENING METHODS SUCH AS RIVETS, SCREWS AND WELDS
» IDEAL FOR QUICK REPAIRS AND STRUCTURAL ASSEMBLIES » EXCELLENT RESISTANCE TO SEVERE ENVIRONMENTAL CONDITIONS » BONDS DISSIMILAR MATERIALS, SUCH AS METAL TO PLASTIC » FILLS LARGE GAPS BETWEEN PARTS
WhaT aRe YOu BOnDinG?
General Purpose General Purpose Metal Plastics/Metals
Gap-fi ll (0.50mm) Gap-fi ll (0.20mm) Gap-fi ll (0.20mm) Gap-fi ll (0.50mm) Gap-fi ll (0.25mm)
non-Porous Porous non-Porous non-Porous non-Porous
uniQue FeaTuReSallows Gap Fill high chemical Resistance high Temperature Resistance Toughened Toughened
Multi-Purpose electrical insulator high Peel Strength
henKeL SOLuTiOnS LOcTiTe® 330 LOcTiTe® 3801 LOcTiTe® 3805 LOcTiTe® 324 LOcTiTe® e20hP
colour amber amber Grey yellow Off-white
Gap fill 0.50mm 0.20mm 0.20mm 0.50mm 0.25mm
Viscosity Gel Syrup heavy Paste Syrup Syrup
Shear Strength# n/mm2 (PSi) 23 (3,300) 16 (2,300) 21 (3,000) 25 (3,300) 23 (3,300)
Temperature Range -54ºc to +120ºc -54ºc to +82ºc -54ºc to +150ºc 135ºc 80ºc
fixture Time 3–5 min 4–6 min 10–15 min 5–10 min 3 hrs
full Strength 24 hrs 24 hrs 16 hrs 72 hrs 24 hrs
Recommended activator/Primer 7387 - - 7075 -
Package Size & idh50 ml kit - 882799
300 ml cartridge - 92933029.5 ml dual syringe - 168330 56 g kit - 459312 50 ml bottle - 88478
50 ml tube - 237107400 ml cartridge - 237109
# grit blasted steel cured for 24 hours at 22ºC. *applied @ 22ºC / 50% relative humidity. For further information refer to product technical data sheet.
This multi-purpose adhesive suits most bonding needs including metal bonding, ID plates and signage. Two part, no mix, fast curing and toughened with good moisture, impact resistance and peel strength.(50ml kit includes 7387 activator 25gm).
Conventional dual syringe, two-part epoxy. Ideal for emergency repairs or where fast cure time is required. Sets in 5 minutes. Resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.
Fast setting, two-component adhesive and filler system. Once mixed, the epoxy cures at room temperature, and forms a high strength, grey bondline.When fully cured, the epoxy is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.
Especially suitable for joining dissimilar materials eg. ferrite to plated materials in electric motors, loudspeakers etc. This product is specifically formulated for toughness and impact strength. Loctite® 324 cures when confined between close fitting parts with the aid of an activator.
Toughened, medium-viscosity, industrial grade epoxy adhesive with a medium work life. Once mixed, the two-component epoxy cures at room temperature to form a tough, off-white, bondline that provides high peel resistance and high shear strengths. The fully cured epoxy is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.
22 | Maintenance, Repair and Overhaul Solutions Guide
WhaT aRe YOu BOnDinG?
General Purpose General Purpose Metal Plastics/Metals
Gap-fi ll (0.50mm) Gap-fi ll (0.20mm) Gap-fi ll (0.20mm) Gap-fi ll (0.50mm) Gap-fi ll (0.25mm)
non-Porous Porous non-Porous non-Porous non-Porous
uniQue FeaTuReSallows Gap Fill high chemical Resistance high Temperature Resistance Toughened Toughened
Multi-Purpose electrical insulator high Peel Strength
henKeL SOLuTiOnS LOcTiTe® 330 LOcTiTe® 3801 LOcTiTe® 3805 LOcTiTe® 324 LOcTiTe® e20hP
colour amber amber Grey yellow Off-white
Gap fill 0.50mm 0.20mm 0.20mm 0.50mm 0.25mm
Viscosity Gel Syrup heavy Paste Syrup Syrup
Shear Strength# n/mm2 (PSi) 23 (3,300) 16 (2,300) 21 (3,000) 25 (3,300) 23 (3,300)
Temperature Range -54ºc to +120ºc -54ºc to +82ºc -54ºc to +150ºc 135ºc 80ºc
fixture Time 3–5 min 4–6 min 10–15 min 5–10 min 3 hrs
full Strength 24 hrs 24 hrs 16 hrs 72 hrs 24 hrs
Recommended activator/Primer 7387 - - 7075 -
Package Size & idh50 ml kit - 882799
300 ml cartridge - 92933029.5 ml dual syringe - 168330 56 g kit - 459312 50 ml bottle - 88478
50 ml tube - 237107400 ml cartridge - 237109
# grit blasted steel cured for 24 hours at 22ºC. *applied @ 22ºC / 50% relative humidity. For further information refer to product technical data sheet.
This multi-purpose adhesive suits most bonding needs including metal bonding, ID plates and signage. Two part, no mix, fast curing and toughened with good moisture, impact resistance and peel strength.(50ml kit includes 7387 activator 25gm).
Conventional dual syringe, two-part epoxy. Ideal for emergency repairs or where fast cure time is required. Sets in 5 minutes. Resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.
Fast setting, two-component adhesive and filler system. Once mixed, the epoxy cures at room temperature, and forms a high strength, grey bondline.When fully cured, the epoxy is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.
Especially suitable for joining dissimilar materials eg. ferrite to plated materials in electric motors, loudspeakers etc. This product is specifically formulated for toughness and impact strength. Loctite® 324 cures when confined between close fitting parts with the aid of an activator.
Toughened, medium-viscosity, industrial grade epoxy adhesive with a medium work life. Once mixed, the two-component epoxy cures at room temperature to form a tough, off-white, bondline that provides high peel resistance and high shear strengths. The fully cured epoxy is resistant to a wide range of chemicals and solvents, and acts as an excellent electrical insulator.
Maintenance, Repair and Overhaul Solutions Guide | 23
PRiMeRS & acTiVaTORS
» ACTIVATES INACTIVE SURFACES AND SPEEDS CURE TIME » SPEEDS CURE THROUGH LARGER GAPS AND DEEP THREADS
DO YOu neeD an acTiVaTOR OR PRiMeR?
activatorsaccelerate cure or Promote cure in Large Gaps or at Low Temperature <5ºc
Primerimprove adhesion to diffi cult to bond
surfaces
WhaT TYPe OF PRODucT aRe YOu uSinG?
anaerobic Threadlocking, Thread Sealing, Gasketing, Retaining cyanoacrylate adhesive
Which PRODucT aRe YOu uSinG?222, 232, 243, 248, 268,515, 518, 542, 561, 569,
609, 635, 660, 680
232, 248, 263, 268, 272, 277, 290, 510, 515, 518, 542, 561,
567, 569, 577, 620, 641324, 325
Post cure Only(Refer to your Loctite® SalesEngineer for further details)
all Loctite® cyanoacrylate adhesives
henKeL SOLuTiOnS LOcTiTe® 7471 LOcTiTe® 7649 LOcTiTe® 7075 LOcTiTe® 7452 LOcTiTe® 770
description activator activator activator activator Polyolefin Primer
base Solvent acetone / isoproponal acetone acetone acetone heptane
drying Time at 20ºc 30 to 70 secs 30 to 70 secs ≥ 70 secs 30 secs 30 secs
On-Part life 7 days 30 days 120 mins ≤60 secs 8 hrs
Package Size & idh133 ml aerosol - 1553340
3.78 ltr can - 990061100 ml pump - 9910763.78 ltr can - 990024
100 ml pump pack - 99006520 g aerosol - 471307946 ml can - 990062
100 ml pump - 990067946 ml can - 990068
# grit blasted steel cured for 24 hours at 22ºC. *applied @ 22ºC / 50% relative humidity.For further information refer to product technical data sheet.
Use to increase the cure speed of Loctite® brand anaerobic products, especially at low temperatures, in applications with passive metals or inert surfaces, or where large gaps are involved.
Use to increase the cure speed of Loctite® brand anaerobic products, especially at low temperatures, in applications with passive metals or inert surfaces, or where large gaps are involved.
Activate reaction of Loctite®324 or Loctite® 325. No mixing required.
Apply post bonding applications to cure excess Loctite® brand cyanoacrylate adhesives. Typical applications include securing wires to coils or PCB’s and tamperproofing adjustments and mounting edge guides or stiffeners.
Helps to provide strong reliable bonds with Loctite® brand cyanoacrylates on “impossible” substrates like polypropylene, polyethylene, PTFE and thermoplastic rubber.
FeaTuReS & BeneFiTS
✓ Activates inactive surfaces and speeds cure time
✓ Speeds cure through larger gaps and deep threads
Metals
active Surfaces Brass, copper, bronze, iron,(Activator optional) soft steel
inactive Surface Aluminium, stainless steel,(Activator required) magnesium,
zinc, black oxide, cadmium, titanium, nickel, others
PE, PP, Acetyl
24 | Maintenance, Repair and Overhaul Solutions Guide
DO YOu neeD an acTiVaTOR OR PRiMeR?
activatorsaccelerate cure or Promote cure in Large Gaps or at Low Temperature <5ºc
Primerimprove adhesion to diffi cult to bond
surfaces
WhaT TYPe OF PRODucT aRe YOu uSinG?
anaerobic Threadlocking, Thread Sealing, Gasketing, Retaining cyanoacrylate adhesive
Which PRODucT aRe YOu uSinG?222, 232, 243, 248, 268,515, 518, 542, 561, 569,
609, 635, 660, 680
232, 248, 263, 268, 272, 277, 290, 510, 515, 518, 542, 561,
567, 569, 577, 620, 641324, 325
Post cure Only(Refer to your Loctite® SalesEngineer for further details)
all Loctite® cyanoacrylate adhesives
henKeL SOLuTiOnS LOcTiTe® 7471 LOcTiTe® 7649 LOcTiTe® 7075 LOcTiTe® 7452 LOcTiTe® 770
description activator activator activator activator Polyolefin Primer
base Solvent acetone / isoproponal acetone acetone acetone heptane
drying Time at 20ºc 30 to 70 secs 30 to 70 secs ≥ 70 secs 30 secs 30 secs
On-Part life 7 days 30 days 120 mins ≤60 secs 8 hrs
Package Size & idh133 ml aerosol - 1553340
3.78 ltr can - 990061100 ml pump - 9910763.78 ltr can - 990024
100 ml pump pack - 99006520 g aerosol - 471307946 ml can - 990062
100 ml pump - 990067946 ml can - 990068
# grit blasted steel cured for 24 hours at 22ºC. *applied @ 22ºC / 50% relative humidity.For further information refer to product technical data sheet.
Use to increase the cure speed of Loctite® brand anaerobic products, especially at low temperatures, in applications with passive metals or inert surfaces, or where large gaps are involved.
Use to increase the cure speed of Loctite® brand anaerobic products, especially at low temperatures, in applications with passive metals or inert surfaces, or where large gaps are involved.
Activate reaction of Loctite®324 or Loctite® 325. No mixing required.
Apply post bonding applications to cure excess Loctite® brand cyanoacrylate adhesives. Typical applications include securing wires to coils or PCB’s and tamperproofing adjustments and mounting edge guides or stiffeners.
Helps to provide strong reliable bonds with Loctite® brand cyanoacrylates on “impossible” substrates like polypropylene, polyethylene, PTFE and thermoplastic rubber.
Maintenance, Repair and Overhaul Solutions Guide | 25
RuST TReaTMenT & cLeaninG
» STABILIZE EXISTING RUST » GUARD AGAINST CORROSION » PREVENT ELECTROCHEMICAL CORROSION » INCREASE BELT FRICTION
WhaT iS YOuR TaSK?
Releases corroded & Rusted Parts
Lubricates & Protects Gasket Removal clean & Degrease clean & Degrease Rust Treatment clean & Degrease
WhaT aRe YOu cLeaninG? - - - Metal Parts all Parts Large Surfaces hands hands
uniQue FeaTuReS
Shock Freeze Two spray options Rapid Removal non-chlorinated non-corrosive converts Rust Biodegradable eff ective on all Stains
Pre-moistenedwaterlesstowels
Prevents corrosion Minimises Flange Damage ODc Free Protects Surface non-Toxic conditions Skin Leaves no residues
up to 121°c non-Flammable Orange Scented Fortifi ed with emollients and natural oils
henKeL SOLuTiOnS LOcTiTe® Freeze& Release
LOcTiTe® ML-11LOcTiTe® chisel Paint Stripper
non-chlorinatedParts cleaner
LOcTiTe® 7070LOcTiTe® extend®
Rust TreatmentLOcTiTe® natural
Blue® LOcTiTe® Yuk-Off® LOcTiTe® hand Wipes
appearance clear liquid Slightly brown White liquid clear liquid clear liquid Milky liquid blue liquid White lotion Textured Towel
dry Time - - - 3o secs 5–20 mins 30 min - - -
Package Size & idh310 g aerosol -
1024403360 ml aerosol -
1827849510 m aerosol -
642664420 g aerosol -
1506652473 g aerosol - 661976
946 ml bottle - 2349813.78 ltr bottle - 160802
709 ml bottle - 2355023.78 ltr bottle -
20980418.9 ltr bucket - 235503
400 ml bottle - 3669434 ltr pump - 367218
15 ltr bucket - 367217
75 pck tub - 337637130 pk bucket - 337638
note: Varies with substrate. For further information refer to product technical data sheet.
Shock-freezes seized and rusted parts, causing microscopic cracks in the rust and allowing the lubricant to penetrate. The assembly can be easily dismantled after allowing 1-2 minutes and parts remain lubricated and protected from corrosion.Recommended for:• Seized and or
rusted components.
A light, semi-drying oil type spray that penetrates, lubricates, displaces water, cleans surfaces and provides protection to metal surfaces, to prevent corrosion.
Removes backed on gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scraping and sanding. Suitable for wood and is non-corrosive to aluminium. Not for use with plastics, linoleum or synthetic fi bres.
• Aggressively penetrates and dissolves
• Dries fast with no residue
• Eliminates the need to disassemble parts
• VOC compliant• No chlorinated
solvent run-off Applications:Formulated to remove oil, grease, fl uids, oxidised oils (gum) and asphalt from all types of metal parts.
General purpose parts cleaner and degreaser which contains no ozone depleting chemicals. Prepares surface for bonding and is non-corrosive and plastic compatible. Removes grease, oil and dirt from electrical parts, tools, bearings, controls, and precision equipment.
Converts existing rust into a stable base. Cured product acts as a primer ready for painting. Protects surfaces from corrosion . Use on metal pipes, valves, fittings, storage tanks, fences, guard rails, conveyors, construction and agricultural equipment.
A biodegradable, allpurpose, industrial strength, concentrated cleaner and degreaser, Natural Blue® contains no hazardous solvents. Formulated for wipe down, pressure spraying and immersion cleaning processes, Natural Blue® can be economically diluted with water at room temperature or heated, to meet a wide range of industrial cleaning applications. ODC free, non flammable, non-toxic and pine scented.(709ml is diluted 1:1 ready for use).
Contains premium-grade cleansing agents that quickly dissolve dirt, grease, resin, ink, paint, glue, tile cements and other stubborn stains. Citrusbased, smooth formula is pH balanced and fortified with skin conditioners lanolin, aloe vera, Vitamin E, jojoba and wheat germ extract to soothe and protect raw, rough hands.
Premoistened with a powerful cleaning formula, the abrasive, yet non-scratching fabric removes tar, grease, wax, ink, paint, lubricants and adhesives.
FeaTuReS & BeneFiTS
✓ Effective rust converter formula for surface preparation of all metals
✓ Fast acting and noncorrosive gasket remover eliminates need for scraping and sanding
✓ Fast and effective industrial grade cleaners
✓ Premium-grade hand cleaner with skin conditioners to soothe and protect hands
26 | Maintenance, Repair and Overhaul Solutions Guide
WhaT iS YOuR TaSK?
Releases corroded & Rusted Parts
Lubricates & Protects Gasket Removal clean & Degrease clean & Degrease Rust Treatment clean & Degrease
WhaT aRe YOu cLeaninG? - - - Metal Parts all Parts Large Surfaces hands hands
uniQue FeaTuReS
Shock Freeze Two spray options Rapid Removal non-chlorinated non-corrosive converts Rust Biodegradable eff ective on all Stains
Pre-moistenedwaterlesstowels
Prevents corrosion Minimises Flange Damage ODc Free Protects Surface non-Toxic conditions Skin Leaves no residues
up to 121°c non-Flammable Orange Scented Fortifi ed with emollients and natural oils
henKeL SOLuTiOnS LOcTiTe® Freeze& Release
LOcTiTe® ML-11LOcTiTe® chisel Paint Stripper
non-chlorinatedParts cleaner
LOcTiTe® 7070LOcTiTe® extend®
Rust TreatmentLOcTiTe® natural
Blue® LOcTiTe® Yuk-Off® LOcTiTe® hand Wipes
appearance clear liquid Slightly brown White liquid clear liquid clear liquid Milky liquid blue liquid White lotion Textured Towel
dry Time - - - 3o secs 5–20 mins 30 min - - -
Package Size & idh310 g aerosol -
1024403360 ml aerosol -
1827849510 m aerosol -
642664420 g aerosol -
1506652473 g aerosol - 661976
946 ml bottle - 2349813.78 ltr bottle - 160802
709 ml bottle - 2355023.78 ltr bottle -
20980418.9 ltr bucket - 235503
400 ml bottle - 3669434 ltr pump - 367218
15 ltr bucket - 367217
75 pck tub - 337637130 pk bucket - 337638
note: Varies with substrate. For further information refer to product technical data sheet.
Shock-freezes seized and rusted parts, causing microscopic cracks in the rust and allowing the lubricant to penetrate. The assembly can be easily dismantled after allowing 1-2 minutes and parts remain lubricated and protected from corrosion.Recommended for:• Seized and or
rusted components.
A light, semi-drying oil type spray that penetrates, lubricates, displaces water, cleans surfaces and provides protection to metal surfaces, to prevent corrosion.
Removes backed on gaskets from any type of assembly in 10 to 15 minutes. Prepares metal parts for new gaskets, eliminating scraping and sanding. Suitable for wood and is non-corrosive to aluminium. Not for use with plastics, linoleum or synthetic fi bres.
• Aggressively penetrates and dissolves
• Dries fast with no residue
• Eliminates the need to disassemble parts
• VOC compliant• No chlorinated
solvent run-off Applications:Formulated to remove oil, grease, fl uids, oxidised oils (gum) and asphalt from all types of metal parts.
General purpose parts cleaner and degreaser which contains no ozone depleting chemicals. Prepares surface for bonding and is non-corrosive and plastic compatible. Removes grease, oil and dirt from electrical parts, tools, bearings, controls, and precision equipment.
Converts existing rust into a stable base. Cured product acts as a primer ready for painting. Protects surfaces from corrosion . Use on metal pipes, valves, fittings, storage tanks, fences, guard rails, conveyors, construction and agricultural equipment.
A biodegradable, allpurpose, industrial strength, concentrated cleaner and degreaser, Natural Blue® contains no hazardous solvents. Formulated for wipe down, pressure spraying and immersion cleaning processes, Natural Blue® can be economically diluted with water at room temperature or heated, to meet a wide range of industrial cleaning applications. ODC free, non flammable, non-toxic and pine scented.(709ml is diluted 1:1 ready for use).
Contains premium-grade cleansing agents that quickly dissolve dirt, grease, resin, ink, paint, glue, tile cements and other stubborn stains. Citrusbased, smooth formula is pH balanced and fortified with skin conditioners lanolin, aloe vera, Vitamin E, jojoba and wheat germ extract to soothe and protect raw, rough hands.
Premoistened with a powerful cleaning formula, the abrasive, yet non-scratching fabric removes tar, grease, wax, ink, paint, lubricants and adhesives.
Maintenance, Repair and Overhaul Solutions Guide | 27
SPeciaLTY anD eMeRGencY RePaiR KiTS
» ENABLES RAPID REPAIR OF DAMAGED OR BURST PIPES » WILL SEAL LEAKS IN TANKS AND OTHER CONTAINMENT VESSELS IN ADDITION TO REPARING
METAL PARTS » INCLUDES A KIT FOR REPAIRING OR REPLACING DAMAGED O-RING SEALS
inDuSTRiaL MainTenance KiTS
20 x Products 13 x Products General Purpose Metal Plastics/Metals
eMeRGencY RePaiR KiTS
Replace or Repair O-Ring Seals Stop Pipe Leaks Repair Metal Surfaces Tamper proofi ng
FeaTuReS & BeneFiTScomprehensive Loctite® core Products Water & Oil Resistant 30 Minute cure 10 Minute cure
Free Tool Box Free Tool Box Permanent Replacement cures Wet or underwater Metal-Like Finish
henKeL SOLuTiOnS Top Line Kit MRO Kit O-Ring Kit Pipe Repair Metal Magic LOcTiTe® 7414LOcTiTe® insulating & Sealing
Wrap
kits contents Threadlockers - 243, 263, 290 50ml
Retaining compounds -609, 641, 660, 680 50ml
Thread Sealants - 515, 567, 569 50ml
bonding adhesives -406 25ml, 454 20g, 3805 56g
anti-Seize lubricants -Silver Grade, 771 nickel 500g
Primers - 7471 127g, 7649 100ml
Others - 790 chisel® Paint Stripper 510g
Metal Magic Repair 113g
Threadlockers - 243.263 50ml
Retaining compound - 609, 660 50ml
Gaskets - 515,587 50mlbonding adhesives -
401 25mlThread Sealants -
567, 569 50mlanti-Seize lubricants - Silver Grade stick 20gPrimer - 7649 133ml
Others - Ml-11 360ml
Metal Magic Repair 113gloctite® 7414 - 50ml
406 instant adhesiveO-Ring Splicing fixture
cutting blade1.6mm, 2.4mm, 3.0mm,
5.7mm, 8.4mm cord(Metric kit)
orloctite® clean-up Solvent
loctite® Waterproofing Solution3/32”, 1/8”, 3/16”,
1/4” cord(imperial kit)
urethane-impregnatedfiberglass Tape
Metal Magic Steel StickProtective Gloves
Putty stick (pre-measuredresin & hardener.
Simply cut off desired amount, knead and apply)
Solvent paste adhesive Self fusing silicone tape
Package Size & idh kit - 496749 kit - 1575818Metric - 473153
imperial - 47315450mm x 1.8m kit - 473162 113 g stick - 645440 50 ml tube - 1606544 3.05 m roll - 1540599
Contain all the essential tools for industrial maintenance reliability including Threadlocking, Retaining Compounds, Thread Sealing, Bonding Adhesives, Anti-Seize Lubricants and Primers.
Packaged in an easy-to-carry, rugged and lockable toolbox. The kit conveniently packages an assortment of popular Loctite® solutions for every MRO need.
Contains all of the materials necessary to produce stationary o-rings on the spot. Saves time by allowing o-ring replacement without disassembling machinery. Eliminates the need for inventory of different sized o-rings.
Recommended for reliable, temporary repairs of metal, plastic and composite pipes. Easy to use - no tools are required and can be applied to odd shapes as required. Cures in 30 minutes and can be sanded or painted.
Easy to use, steel-filled compound designed for emergency maintenance repairs on damp, dry or underwater surfaces. Cures to a metal-like finish in less than 10 minutes under typical temperatures of -30ºC to + 121ºC
Loctite® 7414 is a fast drying paste to be used in production to visually detect any movement in the adjustment of parts. Loctite® 7414 has been developed for use on compression fittings, studs, nuts, parts and assemblies after they have been set to proper tension or position.
Self-fusing, silicone rubber wrap that is recommended for reliable, temporary repairs on a variety of substrates. Typical applications includes flexible hose repair, pipe repair, tool handle wrap, and electrical insulative wrap.
FeaTuReS & BeneFiTS
Tool Kits
✓ Contains essential tools for industrial maintenance and repair
emergency Repair Products
✓ Easy to use – does not require specialised equipment
✓ Enable rapid repair of damaged equipment
28 | Maintenance, Repair and Overhaul Solutions Guide
inDuSTRiaL MainTenance KiTS
20 x Products 13 x Products General Purpose Metal Plastics/Metals
eMeRGencY RePaiR KiTS
Replace or Repair O-Ring Seals Stop Pipe Leaks Repair Metal Surfaces Tamper proofi ng
FeaTuReS & BeneFiTScomprehensive Loctite® core Products Water & Oil Resistant 30 Minute cure 10 Minute cure
Free Tool Box Free Tool Box Permanent Replacement cures Wet or underwater Metal-Like Finish
henKeL SOLuTiOnS Top Line Kit MRO Kit O-Ring Kit Pipe Repair Metal Magic LOcTiTe® 7414LOcTiTe® insulating & Sealing
Wrap
kits contents Threadlockers - 243, 263, 290 50ml
Retaining compounds -609, 641, 660, 680 50ml
Thread Sealants - 515, 567, 569 50ml
bonding adhesives -406 25ml, 454 20g, 3805 56g
anti-Seize lubricants -Silver Grade, 771 nickel 500g
Primers - 7471 127g, 7649 100ml
Others - 790 chisel® Paint Stripper 510g
Metal Magic Repair 113g
Threadlockers - 243.263 50ml
Retaining compound - 609, 660 50ml
Gaskets - 515,587 50mlbonding adhesives -
401 25mlThread Sealants -
567, 569 50mlanti-Seize lubricants - Silver Grade stick 20gPrimer - 7649 133ml
Others - Ml-11 360ml
Metal Magic Repair 113gloctite® 7414 - 50ml
406 instant adhesiveO-Ring Splicing fixture
cutting blade1.6mm, 2.4mm, 3.0mm,
5.7mm, 8.4mm cord(Metric kit)
orloctite® clean-up Solvent
loctite® Waterproofing Solution3/32”, 1/8”, 3/16”,
1/4” cord(imperial kit)
urethane-impregnatedfiberglass Tape
Metal Magic Steel StickProtective Gloves
Putty stick (pre-measuredresin & hardener.
Simply cut off desired amount, knead and apply)
Solvent paste adhesive Self fusing silicone tape
Package Size & idh kit - 496749 kit - 1575818Metric - 473153
imperial - 47315450mm x 1.8m kit - 473162 113 g stick - 645440 50 ml tube - 1606544 3.05 m roll - 1540599
Contain all the essential tools for industrial maintenance reliability including Threadlocking, Retaining Compounds, Thread Sealing, Bonding Adhesives, Anti-Seize Lubricants and Primers.
Packaged in an easy-to-carry, rugged and lockable toolbox. The kit conveniently packages an assortment of popular Loctite® solutions for every MRO need.
Contains all of the materials necessary to produce stationary o-rings on the spot. Saves time by allowing o-ring replacement without disassembling machinery. Eliminates the need for inventory of different sized o-rings.
Recommended for reliable, temporary repairs of metal, plastic and composite pipes. Easy to use - no tools are required and can be applied to odd shapes as required. Cures in 30 minutes and can be sanded or painted.
Easy to use, steel-filled compound designed for emergency maintenance repairs on damp, dry or underwater surfaces. Cures to a metal-like finish in less than 10 minutes under typical temperatures of -30ºC to + 121ºC
Loctite® 7414 is a fast drying paste to be used in production to visually detect any movement in the adjustment of parts. Loctite® 7414 has been developed for use on compression fittings, studs, nuts, parts and assemblies after they have been set to proper tension or position.
Self-fusing, silicone rubber wrap that is recommended for reliable, temporary repairs on a variety of substrates. Typical applications includes flexible hose repair, pipe repair, tool handle wrap, and electrical insulative wrap.
Maintenance, Repair and Overhaul Solutions Guide | 29
TechnicaL ReFeRenceSTen Points about liquid ThreadlockersBy RICK SKIBBA HENKEL CORPORATION, ROCKy HILL, CT
Bolts, studs, set screws and other threaded fasteners are the “ties that bond” industrial equipment together. Considering that fastener loosening is a leading cause of catastrophic failure in machinery, maintaining proper clamping forces is an important element in fastening effectiveness.
Liquid anaerobic threadlockers are an excellent method of keeping fasteners firmly in place. Listed here are ten points that plant personnel should know about using liquid anaerobic threadlockers:
it’s not just a bolt. The real function of nuts and bolts is to provide clamping force to hold two components together. If that clamping force decreases, the fastener begins to slip, and failure becomes inevitable.
Thread space is the enemy. There can be as little as 15% metal-to-metal contact between the thread of a nut and bolt. The empty space leaves room for movement that leads to self-loosening and loss of clamping force.
Side movement causes failure. Fasteners work loose for complex reasons, but a key cause is sideways movement. Bolted surfaces can slide sideways as a result of thermal expansion, bending of the assembly, impact or vibration. As this happens, the bolt takes on a rocking motion that causes the threads to wear against each other. In time, the bolt becomes almost frictionless, and the threads can unwind.
Threadlockers stop all kinds of movement. Liquid anaerobic threadlockers attack the root cause of loosening by filling spaces between the threads. The result is a secure, one-piece assembly that will not loosen under stress.
Sealing stops corrosion. By sealing between thread spaces, threadlockers keep out air and moisture that can cause corrosion – another common cause of fastener failure. Because of their chemical resistance, threadlockers seal effectively in contact with most fluids, gases, and solvents used in industry. (Refer to Fluid Compatibility Chart - pg 34-35).
Threadlockers hold better. In test on transverse shock and vibration machines, liquid threadlockers drastically outperformed mechanical devices (see graph). Bolts secured with threadlocker retained nearly all their clamping force after more than 1,000 cycles. Mechanical devices began to fail almost immediately.
Better performance cost less. Mechanical locking methods are effective to some degree, but are difficult to justify based on cost. A special nut or washer can cost more than four time as much as an application of liquid threadlocker. Mechanical devices also require extensive and costly inventories to keep the range of sizes on hand. Three or four grades of threadlocker – easy to carry and colour-coded, serve the same purpose.
it will come out. All threadlocked fasteners can be disassembled. Different grades of threadlockers can be used depending on the job. Fasteners secured with low and medium strength grades can be removed with common hand tools. Those secured with high strength grades can be removed by applying heat for a specified time.
Threadlockers ease assembly and disassembly. The thixotropic property of Loctite® anaerobics is conducive when applied to threads of fasteners and fittings: they become less viscous when put under stress (being shaken, stirred or dispensed) and return to their original state when stress is removed.
When wet, threadlockers lubricate fasteners, allowing proper, consistent assembly tightening and torque. When cured in place, threadlockers stop corrosion, thus preventing seizure and allowing for ease in disassembly.
There is no “downside”. Liquid threadlockers are not just for certain specialized uses. They perform effectively on fasteners and threaded assemblies of any type and size, in any kind of equipment.
Clampload Retention Comparison100
80
40
60
20
00 200 400 600 800 1000
Number of load cycles
Com
poun
d %
Bolt with threadlocker and nut
Bolt with elastic stop nut
Bolt with tooth lock washer and nut
Bolt with split ring lock washer and nut
Unassisted bolt and nut
In test on transverse shock and vibration machines, liquid threadlockers drastically outperformed mechanical locking devices
30 | Maintenance, Repair and Overhaul Solutions Guide
hiGh STRenGTh DiSaSSeMBLY
PRe-aSSeMBLeD FaSTeneRS
1. Clean all threads (bolt and hole) with Loctite® ODC-Free Cleaner & Degreaser. Allow to dry.
2. If necessary, spray (bolt and hole) with Primer (Refer to Technical data). Allow to dry.
3. Select the proper strength Threadlocking product.
4. Squirt several drops down the sides of the female threads.
5. Apply several drops to bolt. Avoid touching bottle tip to metal.
6. Tighten as usual.
note: Using Loctite® Threadlockers will virtually eliminate stripped threads in aluminium or magnesium housings caused by galvanic corrosion.
BLinD hOLeS (caP ScReWS, eTc.)
1. Clean all threads (bolt and nut) with Loctite® ODC-Free Cleaner & Degreaser. Allow to dry.
2. If necessary, spray all threads with Loctite® Primer (Refer to Technical Data). Allow to dry.
3. Select the proper strength Loctite® Threadlocker product.
4. Insert bolt into through hole assembly.
5. Apply several drops of Threadlocker onto bolt at targeted tightened nut engagement area. Avoid touching bottle tip to metal.
6. Assemble and tighten nut as usual.
aPPLicaTiOn PROceDuReSThreadlocking
ThROuGh hOLe (BOLTS anD nuTS)
1. Clean bolts and nuts with Loctite® ODC-Free Cleaner & Degreaser.
2. Assemble components.
3. Tighten nuts.
4. Apply drops of Loctite® 290 Threadlocker at the nut and bolt juncture.
5. Avoid touching bottle tip to metal.
note: For preventive maintenance on existing equipment: RETIGHTEN nuts and apply Loctite® 290 Threadlocker at the nut and bolt juncture.
Apply Here
Not Here
Onto Threads
Onto Threads
Not Here
290 Here
Localised Heating Methods
1. Apply localised heat to nut or stud (260°C for 5 minutes).
2. Disassemble while HOT.
note: Use standard hand tools for disassembly of low and medium strength Threadlockers.
Maintenance, Repair and Overhaul Solutions Guide | 31
SLiP FiT — LiGhT DuTY
1. Clean parts of contamination with ODC-Free Cleaner & Degreaser. If necessary, spray Loctite® Primer (Refer to Technical Data) onto threaded parts (male and female). Allow to dry. Note: Primer is not required for brass parts.
2. Apply a band of Loctite Product to male threads starting one to two threads from end of pipe.
3. Assemble parts snugly. Do not overtighten.
4. If initial pressure exceeds 6.9 MPa*, wait 30 minutes before pressurizing.
note: • If sealing chemicals or strong acids/bases, refer to Fluid Compatibility Chart (pg 34-35). • Do not use on oxygen or strong oxidisers (chlorine). • Refer to Loctite® Thread Sealing selector Chart (pg 8-9) for correct product selection
*Depending on conditions
STanDaRD FiTTinGS — PiPe, hYDRauLicS, POTaBLe WaTeR OR aiR
ORiGinaL1. Clean all parts with Loctite® ODC-Free Cleaner & Degreaser. 2. Spray all parts (I.D. and O.D.) with Loctite® Primer
(Refer Technical Data).
3. Apply Loctite® 641 dabs around shaft at engagement area. (Refer to Technical Data for Gap Fill)
4. Assemble parts as normal.
5. Wipe off excess.
6. Allow 20 minutes cure time prior to service.
WORn ShaFTFollow directions above except:
1. Determine radial gap.
2. If radial gap exceeds 0.1mm, Loctite® Primer must be used.
3. Take steps to maintain concentricity with large gaps.
4. Larger gaps require longer cure times (30-60 minutes).
5. Loctite® Quick Metal® 660 is NOT recommended for radial gaps exceeding 0.5mm.
note: Loctite® Quick Metal® 660 is very fast fixturing (30 seconds or less) with Loctite® 7471 Primer (T).
aPPLicaTiOn PROceDuReSThread Sealing
1. Disassemble and if necessary, spray all components with Loctite® 7649 Primer. Allow to dry.
2. Apply a thin coating of 567 PST® Pipe Sealant to union face.
3. Apply a band of 567 PST® Pipe Sealant to male threads.
4. Assemble parts snugly.
MeTaL PiPe uniOnS
Shaft Mounted components
Loctite® Product Loctite® Product
567 Band 567 Band 567 Band
Bearing
Shaft
Bearing Mount
32 | Maintenance, Repair and Overhaul Solutions Guide
ReFeR TO LOcTiTe® DO iT RiGhT uSeRS GuiDe FOR FuRTheR aPPLicaTiOn PROceDuReS Such aS;
STaMPeD OR SheeT MeTaL FLanGeS
1. Remove old gasketing material and other heavy contaminants with Loctite® Chisel® Gasket Remover. use mechanical removal technique if required.
note: Avoid grinding.
2. Clean both flanges with Loctite® ODC-Free Cleaner & Degreaser.
3. Spray Loctite® Primer (Refer Technical data) on only one surface. Allow to dry.
4. Apply a continuous bead of SELECTED LOCTITE® GASKETING PRODUCT to the other surface. note: Circle all bolt holes with sealant, if appropriate.
5. Mate Parts. Assemble and tighten as required. note: Immediate assembly not required; however avoid delays over 45 minutes (assemble immediately if primer is used).
6. Allow to cure: a. No pressure – immediate service b. Low pressure (up to 3.45mPa) – 30 to 45 minutes c. High pressure (3.45 to 17.2mPa) – 4 hours d. Extreme high pressure (17.2 to 34.45mPa) – 24 hours
aPPLicaTiOn PROceDuReSformed–in–place Gasketing
SeaLinG caST RiGiD FLanGeS
Threadlocking
• Blind Holes (Studs, etc) • Adjustment Screws • Stripped Thread Repair
Thread Sealing
• Compression Fittings • Flared / Swaged Fittings • Hose Ends – Air & Hydraulic
Puncture Sealing
• Tanks, Vessels, etc
Porosity Sealing
• Porosity in Welds and Castings
Gasket dressing
• Sealing Flanges with Gasket
Strengthen Keyed assemblies
• Keyed Assemblies – Standard & Heavy Duty
• Repair Badly Wallowed Keys
Shaft Mounted components
• Repair Badly Worn Shaft • Slip Fit – Heavy Duty • Press Fit
housed components
• Slip Fit – Light & Heavy Duty • Retaining (Large Gaps)
and More….
Continuous Bead
Circle Bolt holesRaised Flange
1. Remove old gasketing material and other heavy contaminants with Loctite® Chisel® Gasket Remover.
2. Clean both flanges with Loctite® ODC-Free Cleaner & Degreaser.
3. Apply a continuous bead of the selected Loctite® MAXX® SILICONE to sealing surface. Circle all bolt holes. note: • Use proper bead diameter to seal flange width and depth. • Minimize excessive material “squeeze in”.
4. Assemble within 10 minutes by pressing together. Tighten as required.
5. Clean up any excess.
6. Cure times will vary with temperature, humidity, and gap. Typical full cure time is 24 hours
Maintenance, Repair and Overhaul Solutions Guide | 33
Abrasive Coolant ........................ ●Acetaldehyde ............................. ●Acetate Solvents ........................ ●Acetimide ................................... ●Acetic Acid .................................. ●Acetic Acid .................................. ❑Acetic Acid - glacial .................... ●Acetic Anhydride ........................ ●Acetone ...................................... ●Acetyl Chloride ........................... ●Acetylene (Liquid Phase) ........... ●Acid Clay .................................... ●Acrylic Acid ................................ ●Acrylonitrile ............................... ●Activated Alumina ...................... ●Activated Carbon ....................... ●Activated Silica .......................... ●Alcohol-Allyl ............................... ●Alcohol-Amyl .............................. ●Alcohol-Benzyl ........................... ●Alcohol-Butyl ............................. ●Alcohol-Ethyl .............................. ●Alcohol-Furfuryl ......................... ●Alcohol-Hexyl ............................. ●Alcohol-lsopropyl ....................... ●Alcohol-Methyl .......................... ●Alcohol-Propyl ........................... ●Alum-Ammonium ....................... ●Alum-Chrome ............................. ●Alum-Potassium ........................ ●Alum-Sodium .............................. ●Alumina ....................................... ●Aluminium Acetate .................... ●Aluminium Bicarbonate ............. ●Aluminium Bifluoride ................. ●Aluminium Chloride ................... ●Aluminium Sulfate ..................... ●Ammonia Anhydrous .................. ✖Ammonia Solutions .................... ✖Ammonium Bisulfite .................. ●Ammonium Borate ..................... ●Ammonium Bromide .................. ●Ammonium Carbonate ............... ●Ammonium Chloride .................. ●Ammonium Chromate ................ ●Ammonium Fluoride .................. ●Ammonium Fluorosilicate .......... ●Ammonium Formate .................. ●Ammonium Hydroxide ............... ✖Ammonium Hyposulfite ............. ●Ammonium Iodide ...................... ●Ammonium Molybdate ............... ●Ammonium Nitrate ..................... ●Ammonium Oxalate ................... ●Ammonium Persulfate ............... ●Ammonium Phosphate ............... ●Ammonium Picrate .................... ●Ammonium Sulfate .................... ●Ammonium Sulfate Scrubber .... ●Ammonium Sulfide .................... ●Ammonium Thiocyanate ............ ●Amyl Acetate .............................. ●Amyl Amine ................................ ●Amyl Chloride ............................. ●Aniline ........................................ ●Aniline Dyes ............................... ●Anodizing Bath ........................... ●Antichlor Solution ...................... ●Antimony Acid Salts ................... ●Antimony Oxide .......................... ●Antioxidant Gasoline .................. ●Aqua Regia ................................. ✖Argon .......................................... ●Armeen § .................................... ●
Arochlor § ................................... ●Aromatic Gasoline ...................... ●Aromatic Solvents ..................... ●Arsenic Acid ............................... ●Asbestos Slurry ......................... ●Ash Slurry .................................. ●Asphalt Emulsions ..................... ●Asphalt Molten ........................... ●
Bagasse Fibers .......................... ●Barium Acetate .......................... ●Barium Carbonate ...................... ●Barium Chloride ......................... ●Barium Hydroxide ...................... ❑Barium Sulfate ........................... ●Battery Acid ................................ ❑Battery Diffuser Juice ............... ●Bauxite (See Alumina) ............... ●Bentonite .................................... ●Benzaldehyde ............................ ●Benzene ..................................... ●Benzene Hexachloride ............... ●Benzene in Hydrochloric Acid ... ●Benzoic Acid .............................. ●Benzotriazole ............................. ●Beryllium Sulfate ....................... ●Bicarbonate Liquor .................... ● Bilge Lines .................................. ●Bleach Liquor ............................. ●Bleached Pulps .......................... ●Borax § Liquors .......................... ●Boric Acid ................................... ●Brake Fluids ............................... ●Brine Chlorinated ....................... ●Brine (cold) ................................. ●Bromine Solution ........................ †Butadiene ................................... ●Butyl Acetate ............................. ●Butyl Alcohol .............................. ●Butyl Amine ................................ ●Butyl Cellosolve § ...................... ●Butyl Chloride ............................ ●Butyl Ether (Dry) ........................ ●Butyl Lactate .............................. ●Butyral Resin .............................. ●Butyraldehyde ............................ ●Butyric Acid ................................ ❑
Cadmium Chloride ..................... ●Cadmium Plating Bath ............... ●Cadmium Sulfate ........................ ●Calcium Acetate ......................... ●Calcium Bisulfate ....................... ●Calcium Carbonate .................... ●Calcium Chlorate ....................... ●Calcium Chloride ........................ ●Calcium Chloride Brine .............. ●Calcium Citrate .......................... ●Calcium Ferrocyanide ................ ●Calcium Formate ........................ ●Calcium Hydroxide ..................... ●Calcium Lactate ......................... ●Calcium Nitrate .......................... ●Calcium Phosphate .................... ●Calcium Silicate ......................... ●Calcium Sulfamate .................... ●Calcium Sulfate .......................... ●Calcium Sulfite ........................... ●Camphor ..................................... ●Carbitol ....................................... ●Carbolic Acid (phenol) ............... ❑Carbon Bisulfide ........................ ●Carbon Black .............................. ●Carbon Tetrachloride ................. ●Carbonic Acid ............................. ❑Carbowax § ................................ ●Carboxymethyl Cellulose ........... ●Carnauba Wax ............................ ●Casein ........................................ ●Casein Water Paint .................... ●Celite .......................................... ●Cellosolve § ................................ ●Cellulose Pulp ............................ ●Cellulose Xanthate ..................... ●Cement Dry/Air Blown ............... ●Cement Grout ............................. ●
Cement Slurry ............................ ●Ceramic Enamel ......................... ●Ceric Oxide ................................. ●Chalk .......................................... ●Chemical Pulp ............................ ●Chestnut Tanning ....................... ●China Clay .................................. ●Chloral Alcoholate ..................... ●Chloramine ................................. ●Chlorinated Hydrocarbons ......... ●Chlorinated Paperstock ............. ●Chlorinated Solvents .................. ●Chlorinated Sulphuric Acids ...... ✖Chlorinated Wax ......................... ●Chlorine Dioxide ......................... ✖Chlorine Liquid ........................... ✖Chlorine (Dry) ............................. ✖Chloroacetic Acid ....................... ❑Chlorobenzene (Dry) .................. ●Chloroform (Dry) ........................ ●Chloroformate Methyl ................ ●Chlorosulfonic Acid .................... ✖Chrome Acid Cleaning ............... ❑Chrome Liquor ............................ ❑Chrome Plating Bath .................. ❑Chromic Acid 10% ...................... ●Chromic Acid 50% (cold) ........... ✖Chromic Acid 50% (hot) ............. ✖Chromium Acetate ..................... ●Chromium Chloride .................... ●Chromium Sulfate ...................... ●Classifier .................................... ●Clay ............................................. ●Coal Slurry ................................. ●Coal Tar ...................................... ●Cobalt Chloride .......................... ●Copper Ammonium Formate ..... ●Copper Chloride ......................... ●Copper Cyanide .......................... ●Copper Liquor ............................ ●Copper Naphthenate .................. ●Copper Plating (Acid Process) ... ●Copper Plating (Alk. Process) .... ●Copper Sulfate ........................... ●Core Oil ....................................... ●Corundum ................................... ●Creosote ..................................... ●Creosote-Cresylic Acid .............. ●Cyanide Solution ........................ ●Cyanuric Chloride ...................... ● Cyclohexane ............................... ●Cylinder Oils ............................... ●
De-Ionized Water ....................... ●De-Ionized Water Low Conductivity ............................ ●Detergents ................................. ●Developer, photographic ........... ●Dextrin ........................................ ●Diacetone Alcohol ...................... ●Diammonium Phosphate ............ ●Diamylamine .............................. ●Diatomaceaus Earth Slurry ....... ●Diazo Acetate ............................. ●Dibutyl Phthalate ....................... ●Dichlorophenol ........................... ●Dichloro Ethyl Ether ................... ●Dicyandamide ............................ ●Dielectric Fluid ........................... ●Diester Lubricants ..................... ●Diethyl Ether Dry ........................ ●Diethyl Sulfate ........................... ●Diethylamine .............................. ●Diethylene Glycol ....................... ●Diglycolic Acid ........................... ●Dimethyl Formamide ................. ● Dimethyl Sulfoxide ...................... ●Dioxane Dry ................................ ●Dioxidene ................................... ●Dipentene-Pinene ....................... ●Diphenyl ..................................... ●Distilled Water (Industrial) ........ ●Dowtherm § ............................... ●Drying Oil ................................... ●Dust-Flue (Dry) .......................... ●Dye Liquors ................................. ●
Emery-Slurry .............................. ●Emulsified Oils ........................... ●Enamel Frit Slip .......................... ●Esters General ........................... ●Ethyl Acetate .............................. ●Ethyl Alcohol .............................. ●Ethyl Amine ................................ ●Ethyl Bromide ............................. ●Ethyl Cellosolve § ....................... ●Ethyl Cellosolve Slurry § ............ ●Ethyl Formate ............................. ●Ethyl Silicate .............................. ●Ethylene Diamine ....................... ●Ethylene Dibromide ................... ●Ethylene Dichloride .................... ●Ethylene Glycol .......................... ●Ethylenediamine Tetramine ........ ●
Fatty Acids ................................. ●Fatty Acids Amine ...................... ●Fatty Alcohol ............................... ●Ferric-Floc ................................. ●Ferric Chloride ........................... ●Ferric Nitrate .............................. ●Ferric Sulfate .............................. ●Ferrocence-Oil Sol ..................... ●Ferrous Chloride ........................ ●Ferrous Oxalate .......................... ●Ferrous Sulfate10% .................... ●Ferrous Sulfate (Sat) .................. ●Fertilizer Sol ............................... ●Flotation Concentrates ............... ●Fluoride Salts ............................. ●Fluorine, Gaseous or Liquid ........ ●Fluorolube .................................. ●Fluosilic Acid .............................. ●Flux Soldering ............................ ●Fly Ash Dry ................................. ●Foam Latex Mix .......................... ●Foamite ...................................... ●Formaldehyde (cold) ................... ●Formaldehyde (hot) ..................... †Formic Acid (Dil cold) ................. ●Formic Acid (Dil hot) .................... †Formic Acid (cold) ...................... ●Formic Acid (hot) ........................ †Freon § ........................................ †Fuel Oil ....................................... ●Fuming Nitric Red ...................... ✖Fuming Sulfuric .......................... ✖Fuming Oleum ............................ ✖Furfural ...................................... ●
Gallic Acid .................................. ✩Gallium Sulfate .......................... ●Gasoline-Acid Wash ................... ●Gasoline-Alk. Wash ................... ●Gasoline Aviation ....................... ●Gasoline Copper Chloride .......... ●Gasoline Ethyl ............................ ●Gasoline Motor ........................... ●Gasoline Sour ............................. ●Gasoline White ........................... ●Gluconic Acid ............................. ●Glue-Animal Gelatin ................... ●Glue-Plywood ............................. ●Glutamic Acid ............................. ●Glycerine Lye-Brine ................... ✖Glycerol ...................................... ●Glycine ........................................ ●Glycine Hydrochloride ................ ●Glycol Amine .............................. ●Glycolic Acid .............................. ●Glyoxal ........................................ ●Gold Chloride .............................. ●Gold Cyanide .............................. ●Granodine ................................... ●Grape Pomace Graphite .............. ●Grease Lubricating .................... ●Green Soap ................................. ●Grinding Lubricant ..................... ●Grit Steel .................................... ●Gritty Water ................................ ●Groundwood Stock .................... ●GRS Latex ................................... ●
Gum Paste .................................. ●Gum Turpentine ......................... ●Gypsum ...................................... ●
Halane Sol .................................. ●Halogen Tin Plating .................... ●Halowax § ................................... ●Harvel-Trans 0il ......................... ●Heptane ...................................... ●Hexachlorobenzene ................... ●Hexadiene .................................. ●Hexamethylene Tetramine ......... ●Hexane ....................................... ●Hydrazine ................................... ●Hydrazine Hydrate ..................... ●Hydrobromic Acid ...................... ❑Hydrochloric Acid ...................... ●Hydrocyanic Acid ....................... ❑Hydroflouric Acid ....................... ✖Hydrogen Peroxide (dil) ............. ●Hydrogen Peroxide (con) ............ †Hydroponic Sol ........................... ●Hydroquinone ............................. ●Hydroxyacetic Acid .................... ●Hypo ........................................... ●Hypochlorous Acid ..................... ●
Ink ............................................... ●Ink in Solvent-Printing ............... ●Iodine in Alcohol ........................ ●Iodine-Potassium Iodide ........... ●Iodine Solutions ......................... ●Ion Exchange Service ................ ●Ion Exclusion Glycol ................... ●Irish Moss Slurry ........................ ●Iron Ore Taconite ....................... ●Iron Oxide ................................... ●Isobutyl Alcohol ......................... ●Isobutyraldehyde ....................... ●Isooctane ................................... ●Isopropyl Alcohol ....................... ●Isocyanate Resin ........................ ●Isopropyl Acetate ....................... ●Isopropyl Ether ........................... ●Itaconic Acid .............................. ●
Jet Fuels ..................................... ●Jeweler’s Rouge ........................ ●Jig Table Slurry .......................... ● Kaolin-China Clay § ................... ●Kelp Slurry ................................. ●Kerosene .................................... ●Kerosene Chlorinated ................ ●Ketone ........................................ ●
Lacquer Thinner ......................... ●Lactic Acid ................................. ●Lapping Compound .................... ●Latex-Natural ............................. ●Latex-Synthetic ......................... ●Latex Synthetic Raw .................. ●Laundry Wash Water .................. ●Laundry Bleach .......................... ●Laundry Blue .............................. ●Laundry Soda ............................. ●Lead Arsenate ............................ ●Lead Oxide ................................. ● Lead Sulfate ............................... ●Lignin Extract ............................. ● Lime Slaked ............................... ●Lime Sulfur Mix .......................... ●Liquid Ion Exchange .................. ●Lithium Chloride ........................ ●LOX (Liquid 02) ............................ ✖Ludox .......................................... ●Lye .............................................. ✖
Machine Coating Color .............. ●Magnesite Slurry ....................... ●Magnesite .................................. ●Magnesium Bisulfite .................. ●Magnesium Carbonate .............. ●Magnesium Chloride .................. ●Magnesium Hydroxide ............... ●Magnesium Sulfate ..................... ●
Maleic Acid ................................. ●Maleic Anhydride ....................... ●Manganese Chloride ................... ●Manganese Sulfate ..................... ●Melamine Resin ......................... ●Menthol ...................................... ●Mercaptans ................................ ●Mercuric Chloride ...................... ●Mercuric Nitrate ......................... ●Mercury ...................................... ●Mercury Dry ............................... ●Methane ..................................... ●Methyl Alcohol ........................... ●Methyl Acetate ........................... ●Methyl Bromide .......................... ●Methyl Carbitol .......................... ●Methyl Cellosolve § .................... ●Methyl Chloride .......................... ●Methyl Ethyl Ketone .................... ●Methyl Isobutyl Ketone ............... ●Methyl Lactate ........................... ●Methyl Orange ............................ ●Methylamine .............................. ●Methylene Chloride .................... ●Mineral Spirits ........................... ●Mixed Acid, Nitric/Sulfuric ......... ✖Monochloracetic Acid ................ ●Morpholine ................................. ●Mud ............................................ ● Nalco Sol. ................................... ●Naphtha ...................................... ●Naphthalene ............................... ●Naval Stores Solvent ................. ●Nematocide ................................ ●Neoprene Emulsion .................... ●Neoprene Latex .......................... ●Nickel Acetate ............................ ●Nickel Ammonium Sulfate .......... ●Nickel Chloride ........................... ●Nickel Cyanide ........................... ●Nickel Fluoborate ....................... ●Nickel Ore Fines ......................... ●Nickel Plating Bright .................. ●Nickel Sulfate ............................. ●Nicotinic Acid ............................. ❑Nitrate Sol. ................................. ●Nitration Acid(s) ......................... ✖Nitric Acid .................................. ✖Nitric Acid10% ........................... ❑Nitric Acid 20% ........................... †Nitric Acid Anhydrous ................ ✖Nitric Acid Fuming ..................... ✖Nitro Aryl Sulfonic Acid ............. ●Nitrobenezene-Dry .................... ●Nitrocellulose ............................. ●Nitrofurane ................................. ●Nitroguanidine ........................... ●Nitroparaffins-Dry ..................... ●Nitrosyl Chloride ........................ ●Norite Carbon ............................. ●Nuchar ........................................ ● Oakite § Compound .................... ●Oil, Creosote ............................... ●Oil, Emulsified ............................ ●Oil, Fuel ...................................... ●Oil, Lubricating .......................... ●Oil, Soluble ................................. ●Oleic Acid (hot) ........................... ●Oleic Acid (cold) ......................... ●Ore Fines-Flotation .................... ●Ore Pulp ...................................... ●Organic Dyes .............................. ●Oxalic Acid (cold) ....................... ●Ozone (wet) ................................ ✖
Paint-Linseed Base..................... ●Paint-Water Base ....................... ●Paint-Remover-Sol. Type ........... ●Paint-Vehicles ............................ ●Palmitic Acid .............................. ●Paper Board Mill Waste ............. ●Paper Coating Slurry................... ●Paper Pulp .................................. ●Paper Pulp with Amun. .............. ●
LEGEND:● All Loctite® Anaerobic Sealants are Compatible Including # 243, 542, 567, 569, 577† Use Loctite® 277✖Not Recommended❑< 10% (same as ●) > 10% (same as †)✩< 5% (same as ●) > 5% (same as †)❖Use Loctite® # 243, 290
LiQuiDS, SOLuTiOnS & SuSPenSiOnS(FoR metal thReaDeD FIttIngs sealeD wIth loCtIte® sealants)
FLuiD cOMPaTaBiLiTY chaRT
34 | Maintenance, Repair and Overhaul Solutions Guide
FLuiD cOMPaTaBiLiTY chaRT
Paper Pulp with Dye ................... ●Paper Pulp, bleached ................. ●Paper Pulp, bleached-washed .. ●Paper Pulp Chlorinated ............... ●Paper Groundwood .................... ●Paper Rag ................................... ●Paper Stocks, Fine ..................... ●Paradichlorobenezene ............... ●Paraffin Molten .......................... ●Paraffin Oil ................................. ●Paraformaldehyde ..................... ●Pectin Solution Acid .................. ●Pentachlorethane ...................... ●PentaerythritoI Sol. ................... ●Perchlorethylene (Dry) ............... ●Perchloric Acid ........................... ❑Perchloromethyl Mercaptan ...... ●Permanganic Acid ...................... ✖Persulfuric Acid ......................... ✖Petroleum Ether ......................... ●Petroleum Jelly .......................... ●Phenol Formaldehyde Resins .... ●Phenol Sulfonic Acid .................. ●Phenolic Glue ............................. ●Phloroglucinol ............................ ●Phosphate Ester ......................... ●Phosphatic Sand ........................ ●Phosphoric Acid 85% (hot) ........ ✖Phosphoric Acid 85% (cold) ....... †Phosphoric Acid 50% (hot) .......... †Phosphoric Acid 50% (cold) ....... †Phosphoric Acid 10% (cold) ....... ●Phosphoric Acid 10% (hot) ......... †Phosphorous Molten .................. ●Phosphotungstic Acid ................. ●Photographic Sol. ...................... ●Phthalic Acid .............................. ●Phytate ....................................... ●Phytate Salts .............................. ●Pickling Acid, Sulfuric ............... ●Picric Acid Solutions .................. ●Pine Oil Finish ............................ ●Plating Sol. as follows: Brass Cyanide .......................... ● Bronze-Cyanide ....................... ● Chromium & Cadmium ............. ● Cyanide .................................... ● Cobalt Acid ............................... ● Copper Acid .............................. ● Copper Alk. ............................... ● Gold Cyanide ............................ ● Iron-Acid .................................. ● Lead-Fluoro .............................. ● Nickel Bright ............................ ● Platinum ................................... ● Silver-Cyanide .......................... ● Tin-Acid .................................... ● Tin Alk. Barrel .......................... ● Zinc Acid .................................. ● Zinc Alk. Cyanide ..................... ●Polyacrylonitrile Slurry .............. ●Polypentek ................................. ●Polysulfide Liquor ...................... ●Polyvinyl Acetate Slurry ............ ●Polyvinyl Chloride ...................... ●Porcelain Frit .............................. ●Potash ........................................ ❑
Potassium Acetate ..................... ●Potassium Alum. Sulfate ........... ●Potassium Bromide ................... ●Potassium Carbonate ................ ●Potassium Chlorate ................... ●Potassium Chloride Sol. ............ ●Potassium Chromate ................. ●Potassium Cyanide Sol. ............. ●Potassium Dichromate .............. ●Potassium Ferricyanide ............. ●Potassium Hydroxide ................. ✖Potassium Iodide ....................... ●Potassium Nitrate ...................... ●Potassium Perchlorate .............. ●Potassium Permanganate ......... ●Potassium Persulfate ................ ●Potassium Phosphate ................ ●Potassium Silicate ..................... ●Potassium Sulfate ...................... ●Potassium Xanthate ................... ●Press Board Waste .................... ●Propionic Acid ............................ ●Propyl Alcohol ............................ ●Propyl Bromide .......................... ●Propylene Glycol ........................ ●Pumice ....................................... ●Pyranol ....................................... ●Pyridine ...................................... ●Pyrogallic Acid ........................... ●Pyrogen Free Water ................... ●Pyrole ......................................... ●Pyromellitic Acid ........................ ●
Quebracho Tannin ...................... ●
Rag Stock Bleached .................... ●Rare Earth Salts ......................... ●Rayon Acid Water ....................... ●Rayon Spin Bath ......................... ●Rayon Spin Bath spent .............. ●Resorcinol .................................. ●River Water ................................. ●Road Oil ...................................... ●Roccal ........................................ ●Rosin-Wood ................................. ●Rosin in Alcohol ......................... ●Rosin Size ................................... ●Rubber Latex .............................. ●
Safrole ......................................... ●Salt Alkaline ............................... ●Salt Electrolytic ......................... ●Salt Refrg. .................................. ●Sand-Air Blown Slurry ............... ●Sand-Air Phosphatic .................. ●Sea Coal ..................................... ●Sea Water ................................... ●Selenium Chloride ..................... ●Sequestrene ............................... ●Sewage ....................................... ●Shellac ....................................... ●Shower Water ............................. ●Silica Gel .................................... ●Silica Ground .............................. ●Silicone Tetrachloride ................ ●Silicone Fluids ............................ ●Silver Cyanide ............................ ●Silver Iodide-Aqu. ...................... ●
Silver Nitrate .............................. ●Size Emulsion ............................. ●Skelly Solve E, L ......................... ●Slate to 400 Mesh ...................... ●Soap Lye ..................................... ✖Soap Solutions (Stearates) ........ ●Soap Stone Air Blown ................ ●Soda Pulp ................................... ●Sodium Acetate .......................... ●Sodium Acid Fluoride ................. ●Sodium Aluminate ..................... ●Sodium Arsenate ....................... ●Sodium Benzene Sulfonate ....... ●Sodium Bichromate ................... ●Sodium Bisulfite ........................ ●Sodium Bromide ........................ ●Sodium Carbonate ..................... ●Sodium Chlorate ........................ ●Sodium Chlorite ......................... ●Sodium Cyanide ......................... ●Sodium Ferricyanide .................. ●Sodium Formate ........................ ●Sodium Glutamate ..................... ●Sodium Hydrogen Sulfate .......... ●Sodium Hydrosulfite .................. ●Sodium Hydrosulfide ................. ●Sodium Hydrochloride ............... ●Sodium Hydroxide ...................... ✖Sodium Hydro. 20% (cold) ......... ●Sodium Hydro. 20% (hot) ............ †Sodium Hydro. 50% (cold) .......... †Sodium Hydro. 50% (hot) .......... ✖Sodium Hydro. 70% (cold) .......... †Sodium Hydro. 70% (hot) ........... ✖Sodium Hypochlorite ................. ●Sodium Lignosulfonate .............. ●Sodium Metasilicate .................. ●Sodium Molten ........................... ●Sodium Nitrate ........................... ●Sodium Nitrite-Nitrate ................ ●Sodium Perborate ...................... ●Sodium Peroxide ........................ ✖Sodium Persulfate ..................... ●Sodium Phosphate-Mono .......... ●Sodium Phosphate-Tri ............... ●Sodium Potassium Chloride ...... ●Sodium Salicylate ...................... ●Sodium Sesquicarbonate .......... ●Sodium Silicate .......................... ●Sodium Silcofluoride ................. ●Sodium Stannate ....................... ●Sodium Sulfate .......................... ●Sodium Sulfide ........................... ●Sodium Sulfite ........................... ●Sodium Sulfhydrate ................... ●Sodium Thiocyanate .................. ●Sodium Thiosulfate .................... ●Sodium Tungstate ...................... ●Sodium Xanthate ....................... ●Solox-Denat. Ethanol ................. ●Soluble Oil .................................. ●Solvent Naphthas ...................... ●Sorbic Acid ................................. ●Sour Gasoline ............................. ●Soybean Sludge-Acid ................ ●Spensol Solution ........................ ●Stannic Chloride ........................ ●Starch ......................................... ●
Starch Base ................................ ●Stearic Acid ................................ ●Steep Water ............................... ●Sterilization Steam .................... ●Stillage Distillers ....................... ●Stoddard Solvent ....................... ●Styrene ....................................... ●Styrene Butadiene Latex ........... ●Sulfamic Acid ............................. ●Sulfan-Sulfuric Anhydride ......... ●Sulfathiazole .............................. ●Sulfite Liquor ............................. ●Sulfite Stock .............................. ●Sulfonated Oils ........................... ●Sulfones ..................................... ●Sulfonic Acids ............................ ●Sulfonyl Chloride ....................... ●Sulfur Slurry ............................... ●Sulfur Solution ........................... ● in Carbon Disulfide .................. ●Sulphuric Acid 0-7% ................... †Sulphuric Acid 7-40% ................. †Sulphuric Acid 40-75% ............... †Sulphuric Acid 75-95% .............. ✖Sulphuric Acid 95-100% ............ ✖Sulphurous Acid .......................... †Sulfuryl Chloride ........................ ●Surfactants ................................ ●Synthetic Latex .......................... ●
Taconite-Fines ........................... ●Talc-Slurry ................................. ●Tankage-Slurry .......................... ●Tannic Acid (cold) ....................... †Tamin .......................................... ●Tar & Tar Oil ................................ ●Tartaric Acid ............................... ●Television Chemicals ................. ●Tergitol § .................................... ●Terpineol .................................... ●Tetraethyl Lead .......................... ●Tetrahydrofuran ......................... ●Tetranitromethane ..................... ●Textile Dyeing ............................. ●Textile Finishing Oil ................... ●Textile Printing Oil ..................... ●Thiocyanic Acid .......................... ●Thioglycollic Acid ....................... ●Thionyl Chloride ......................... ●Thiophosphoryl Chloride ........... ●Thiourea ..................................... ●Thorium Nitrate .......................... ●Thymol ........................................ ●Tin Tetrachlorida ........................ ●Tinning Sol. DuPont ................... ●Titania Paper Coating ................ ●Titanium Oxide Slurry ................ ●Titanium Oxy Sulfate ................. ●Titanium Sulfate ........................ ●Titanium Tetrachloride .............. ●Toluol .......................................... ●Toluene ....................................... ●p-Toluene Sulfonic Acid .............. †Transil Oil ................................... ●Trichloracetic Acid ..................... ●Trichlorethane 1,1,1 ................... ●Trichlorethylene ......................... ●Trichlorethylene-Dry ................. ●
Tricresyl Phosphate ................... ●Triethanolamine ......................... ●Triethylene Glycol ...................... ●Trioxane ...................................... ●Tungstic Acid ............................. ●Turpentine ................................... ● UCON § Lube .............................. ●Udylite Bath-Nickel .................... ●Undecylenic Acid ....................... ●Unichrome Sol. Alk. ................... ●Uranium Salts ............................ ●Uranyl Nitrate ............................. ●Uranyl Sulfate ............................ ●Urea Ammonia Liquor ................ ●
Vacuum to 100 Micron ............... ●Vacuum below 100 Micron ........ ●Vacuum Oil ................................. ●Vanadium Pentoxide .................. ●Slurry .......................................... ●Varnish ....................................... ●Varsol-Naphtha Solv. ................. ●Versene § ................................... ●Vinyl Acetate Dry or Chloride Monomer ................... ●VinyI Chloride Latex Emul . ......... ●Vinyl Resin Slurry ....................... ●Viscose ....................................... ●Vortex-Hydroclone ...................... ●
Water-Acid – Below pH7 ............. ●Water pH7 to 8 ........................... ●Water Alkaline – Over pH8 ......... ●Water Mine Water ...................... ●Water Potable ............................. ❖Water River ................................ ●Water Sandy ............................... ●Water “White” – low pH ............. ●Water “White” – high pH ........... ●Wax ............................................. ●Wax Chlorinated ......................... ●Wax Emulsions ........................... ●Weed Killer Dibromide ............... ●Weisberg Sulfate Plating ........... ●Wood ground pulp ...................... ●Wort Lines ................................... ● X-Ray Developing Bath .............. ●Xylene ......................................... ● Zelan ........................................... ●Zeolite Water .............................. ●Zinc Acetate ............................... ●Zinc Bromide .............................. ●Zinc Chloride .............................. ●Zinc Cyanide-Alk. ...................... ●Zinc Fines Slurry ........................ ●Zinc Flux Paste ........................... ●Zinc Galvanizing ......................... ●Zinc Hydrosulfite ........................ ●Zinc Oxide in Water ..................... ●Zinc Oxide in Oil ......................... ●Zinc Sulfate ................................ ●Zincolate .................................... ●Zirconyl Nitrate .......................... ●Zirconyl Sulfate ........................... ●
Acetylene ...................................... ●Acid & Alkali Vapors ..................... ●Air ................................................. ●Amine ........................................... ●Ammonia ...................................... ●
Butane .......................................... ●Butadiene Gas/Liquid ................... ●Butylene Gas/Liquid ...................... ●By-Product Gas (Dry) .................... ●
Carbon Dioxide ............................. ●Carbon Disulfide ........................... ●Carbon Monoxide .......................... ●Chloride (Dry) ................................ ●Chlorine (Dry) ................................ ✖Chlorine (Wet) ............................... ✖Coke-Oven Gas (Cold) ................... ●Coke-Oven Gas (Hot) ..................... †Cyanogen Chloride ....................... ●Cyanogen Gas ............................... ●
Ethane .......................................... ●Ether-see Diethyl Ether ................ ●Ethylene ........................................ ●Ethylene Oxide .............................. ●
Freon § (11-12-21-22) ................... †Furnace Gas (Cold) ........................ †Furnace Gas (Hot) ......................... ●
Gas Drip Oil ................................... ●Gas Flue ........................................ ●Gas Manufacturing ....................... ●Gas Natural ................................... ●
Helium .......................................... ●Hydrogen Gas – Cold .................... ●Hydrogen Chloride ........................ ●Hydrogen Cyanide ........................ ●Hydrogen Sulfide – Wet & Dry ....... ●
Isobutane ....................................... ●Methane ........................................ ●Methyl Chloride ............................ ●
Natural Gas – Dry ......................... ●Nitrogen Gas ................................. ●Nitrous Oxide ................................ ●
Oil-Solvent Vapor .......................... ●Oxygen .......................................... ✖Ozone ............................................ ✖
Producer Gas 50 PSI ..................... ●Propane ........................................ ●Propylene ...................................... ●
Steam High Pressure (≤ 70 psi) .... ✖Steam Low Pressure (≤ 70 psi) ..... ●Sulfur Dioxide ............................... ●Sulfur Dioxide Dry ......................... ●Sulfur Trioxide Gas ....................... ✖Sulfuric Acid Vapor ....................... ●
NOTE: 1. The above information does not constitute a recommendation of sealant use. It is intended only as a guide for consideration by the purchaser with the expectation of favorable confirming test results. It is impossible to test sealant reaction with the multitude of chemicals in existence, therefore, compatibility has been estimated based on a wide variety of customer experience.
2. With the stringent action of such chemicals as Freon §, strong cold acids and caustics, thorough evaluation is suggested. Sealing of hot corrosive chemicals is not recommended.
3. Contact Henkel Corporation for use with chemicals not covered by this information.
§ Listing(s) may be Brand Name(s) or Trademarks for chemicals of Corporations other than Henkel. Freon is a reg. trademark of E.I. DuPont de Numours, Co., Inc.
Loctite® product numbers in red are worldwide or application-specific products.
(This is a list of chemical stability only. It does not constitute approval for use in the processing of foods, drugs, cosmetics, pharmaceuticals, and ingestible chemicals.)
Loctite® sealants are not recommended for use in pure oxygen or chlorine environments or in conjunction with strong oxidising agents, an explosive reaction can result.
The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results obtained by others over whose methods we have no control. It is the user’s responsibility to determine suitability for the user’s purpose of any production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof.
In light of the foregoing, HENKEL CORPORATION SPECIFICALLy DISCLAIMS ALL WARRANTIES OF MERCHANTABILITy OR FITNESS FOR A PARTICULAR PURPOSE ARISING FROM SALE OR USE OF henkel CORPORATION’S PRODUCTS. henkel CORPORATION SPECIFICALLy DISCLAIMS ANy LIABILITy FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANy KIND, INCLUDING LOST PROFITS. The discussion herein of various processes or compositions is not to be interpreted as a representation that they are free from domination of patents owned by others or as a license under any henkel CORPORATION patents which may cover such processes or compositions. We recommend that each prospective user test the proposed application to determine its suitability for the purposes intended prior to incorporation to determine its suitability for manufacturing process using this data as a guide. This product may be covered by one or more United States or foreign patents or patent application.
LiQuiDS, SOLuTiOnS & SuSPenSiOnS(FoR metal thReaDeD FIttIngs sealeD wIth loCtIte® sealants)
GaSeS
Maintenance, Repair and Overhaul Solutions Guide | 35
henkel australia Pty Ltd.135–141 Canterbury RoadKilsyth, Victoria 3137Melbourne, AustraliaTel: +61–3–9724 6444Fax: +61–3–8761 6988
henkel new Zealand Ltd.2 Allens Road, East TamakiPO Box 58 493Greenmount 1730Auckland, New ZealandTel: +64–9–272 6710Fax: +64–9–272 6735
® Except as otherwise noted, all marks used above in this brochure/leaflet, report/data sheet etc. are trademarks and/
or registered trademarks of Henkel and/or its affiliates in the US and elsewhere.
© Copyright 2014. Henkel Asia-Pacific and China Headquarters. All rights reserved. APH–AG–101 (2/2014)
IDH 1670851 Art No 1026
Henkel products are designed to meet the specifications and testing standards of a variety of agencies. Because such standards change or may be modified, no warranty is given regarding such compliance. The information provided may be used as a quick reference tool to aid in design or application. For up-to-the-minute information on agency approvals, or to inquire about additional agency approvals, please contact Henkel Product Management team or local Technical Support team.
Contact us at: www.loctite.com.au
www.loctite.com.au