manual monitor user guide for asus ve276q
DESCRIPTION
Manual Monitor User Guide for Asus VE276QTRANSCRIPT
VE276Q/VK276Q Series LCD Monitor
User Guide
VE276Q
VK276Q
E5829 V1 April 2010
ii
Copyright © 2010 ASUSTeK COMPUTER INC. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Table of contentsNotices ......................................................................................................... iiiSafety information ...................................................................................... ivCare & Cleaning ........................................................................................... v1.1 Welcome! ...................................................................................... 1-11.2 Package contents ......................................................................... 1-11.3 Assembling the monitor base ..................................................... 1-21.4 Connect cables ............................................................................. 1-21.5 Monitor introduction .................................................................... 1-3
1.5.1 Front of the LCD monitor ................................................ 1-3
1.5.2 Rear of the LCD monitor ................................................. 1-5
2.1 Detaching the arm/stand(for VESA wall mount) ....................... 2-12.2 Adjusting the monitor .................................................................. 2-22.3 Install LifeFrame 2 software ........................................................ 2-23.1 OSD (On-Screen Display) menu ................................................. 3-1
3.1.1 How to reconfigure .......................................................... 3-1
3.1.2 OSD Function Introduction .............................................. 3-1
3.2 Specifications ............................................................................... 3-63.3 Troubleshooting (FAQ) ................................................................ 3-73.4 Supported Timing List ................................................................. 3-8
iii
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
• Thisdevicemaynotcauseharmfulinterference,and
• Thisdevicemustacceptanyinterferencereceivedincludinginterferencethatmaycauseundesiredoperation.
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15oftheFCCRules.Theselimitsare designed to provide reasonable protection against harmful interference inaresidentialinstallation.Thisequipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewithmanufacturer’sinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisnoguaranteethatinterferencewillnot occur in a particular installation. If this equipment does cause harmful interferencetoradioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthefollowingmeasures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmenttoanoutletonacircuitdifferentfromthattowhich the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
AsanEnergyStar® Partner,ourcompanyhasdeterminedthatthisproductmeetstheEnergyStar® guidelines for energyefficiency.
Canadian Department of Communications Statement
ThisdigitalapparatusdoesnotexceedtheClassBlimitsforradionoise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
iv
Safety information• Beforesettingupthemonitor,carefullyreadallthedocumentationthat
came with the package.
• Topreventfireorshockhazard,neverexposethemonitortorainormoisture.
• Nevertrytoopenthemonitorcabinet.Thedangeroushighvoltagesinsidethemonitormayresultinseriousphysicalinjury.
• Ifthepowersupplyisbroken,donottrytofixitbyyourself.Contactaqualifiedservicetechnicianoryourretailer.
• Beforeusingtheproduct,makesureallcablesarecorrectlyconnectedandthepowercablesarenotdamaged.Ifyoudetectanydamage,contactyourdealerimmediately.
• Slotsandopeningsonthebackortopofthecabinetareprovidedforventilation.Donotblocktheseslots.Neverplacethisproductnearorover a radiator or heat source unless proper ventilation is provided.
• Themonitorshouldbeoperatedonlyfromthetypeofpowersourceindicatedonthelabel.Ifyouarenotsureofthetypeofpowersupplytoyourhome,consultyourdealerorlocalpowercompany.
• Usetheappropriatepowerplugwhichcomplieswithyourlocalpowerstandard.
• Donotoverloadpowerstripsandextentioncords.Overloadingcanresult in fire or electric shock.
• Avoiddust,humidity,andtemperatureextremes.Donotplacethemonitorinanyareawhereitmaybecomewet.Placethemonitoronastable surface.
• Unplugtheunitduringalightningstormorifitwillnotbeusedforalong period of time. This will protect the monitor from damage due to power surges.
• Neverpushobjectsorspillliquidofanykindintotheslotsonthemonitor cabinet.
• Toensuresatisfactoryoperation,usethemonitoronlywithULlistedcomputers which have appropriate configured receptacles marked between 100-240V AC.
• Ifyouencountertechnicalproblemswiththemonitor,contactaqualifiedservicetechnicianoryourretailer.
v
Care & Cleaning• Beforeyouliftorrepositionyourmonitor,itisbettertodisconnectthecables
and power cord. Follow the correct lifting techniques when positioning the monitor.Whenliftingorcarryingthemonitor,grasptheedgesofthemonitor.Donotliftthedisplaybythestandorthecord.
• Cleaning.Turnyourmonitoroffandunplugthepowercord.Cleanthemonitorsurfacewithalint-free,non-abrasivecloth.Stubbornstainsmayberemovedwith a cloth dampened with mild cleaner.
• Avoidusingacleanercontainingalcoholoracetone.UseacleanerintendedforusewiththeLCD.Neverspraycleanerdirectlyonthescreen,asitmaydripinside the monitor and cause an electric shock.
The following symptoms are normal with the monitor:• Thescreenmayflickerduringtheinitialuseduetothenatureofthefluorescent
light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears.
• Youmayfindslightlyunevenbrightnessonthescreendependingonthedesktoppatternyouuse.
• Whenthesameimageisdisplayedforhours,anafterimageofthepreviousscreenmayremainafterswitchingtheimage.ThescreenwillrecoverslowlyoryoucanturnoffthePowerSwitchforhours.
• Whenthescreenbecomesblackorflashes,orcannotworkanymore,contactyourdealerorservicecentertofixit.Donotrepairthescreenbyyourself!
Conventions used in this guide
WARNING:Informationtopreventinjurytoyourselfwhentryingtocomplete a task.
CAUTION:Informationtopreventdamagetothecomponentswhentryingtocompleteatask.
IMPORTANT:InformationthatyouMUSTfollowtocompleteatask.
NOTE:Tipsandadditionalinformationtoaidincompletingatask.
vi
WheretofindmoreinformationRefer to the following sources for additional information and for product and software updates.
1. ASUS websitesTheASUSwebsitesworldwideprovideupdatedinformationonASUShardware and software products. Refer to http://www.asus.com
2. Optional documentationYourproductpackagemayincludeoptionaldocumentationthatmayhavebeenaddedbyyourdealer.Thesedocumentsarenotpartofthestandardpackage.
1-1ASUSLCDMonitorVE276Q/VK276QSeries
1.1 Welcome!ThankyouforpurchasingtheASUS®VE276Q/VK276QSeriesLCDmonitor!
ThelatestwidescreenLCDmonitorfromASUSprovidesacrisper,broader,andbrighterdisplay,plusahostoffeaturesthatenhanceyourviewingexperience.
Withthesefeatures,youcanenjoytheconvenienceanddelightfulvisualexperiencethattheVE276Q/VK276QSeriesbringsyou!
1.2 Package contentsCheckyourVE276Q/VK276QSeriesLCDpackageforthefollowingitems:
LCD monitor
Monitor base
1xCD
Quick start guide
1xPowercord
1xVGAcable
1xWebCamUSBcable(OnlyavailableformodelVK276Q)
1xDVIcable
1xAudiocable
Ifanyoftheaboveitemsisdamagedormissing,contactyourretailerimmediately.
1-2 Chapter 1: Product Introduction
1.3 Assembling the monitor baseTo assemble the monitor base:1. Attachthebasetothearmandfixwiththescrewtojointhemtightly.Youcan
easilytightenthescrewbyfingers.
2. Adjustthemonitortotheanglethatismostcomfortableforyou.
Werecommendthatyoucoverthetablesurfacewithsoftclothtopreventdamage to the monitor.
1
2
Make sure to screw the base to the arm tightly.
1.4 Connect cablesTo connect cables:
Connectthecablesyouneedbasedonchapter1.5.2,page1-5.
1-3ASUSLCDMonitorVE276Q/VK276QSeries
1.5 Monitor introduction
1.5.1 Front of the LCD monitor
1 2 3 4 5 6 7
1. Button:
Automaticallyadjusttheimagetoitsoptimizedposition,clock,and•phasebylongpressingthisbuttonfor2-4seconds(forVGAmodeonly).
Usethishotkeytoswitchfromsixvideopresetmodes(SceneryMode,•StandardMode,TheaterMode,GameMode,NightViewMode,andsRGBMode)withSPLENDID™VideoEnhancementTechnology.
ExittheOSDmenuorgobacktothepreviousmenuastheOSDmenu•is active.
2. Button:
Press this button to activate the Picture-in-picture function.•
Both the DVI and HDMI input source should not be selected as both the •MainandPIPsourcesimultaneously.
3. Button:
Press this button to decrease the value of the function selected or move •tothenextfuction.
ThisisalsoahotkeyforVolumeadjustment.•
4. MENUButton:
Press this button to enter the OSD menu.•
Pressthisbuttontoenter/selecttheicon(function)highlightedwhilethe•OSD is activated.
1-4 Chapter 1: Product Introduction
5. Button:
Press this button to increase the value of the function selected or move •right/uptothenextfunction.
ThisisalsoahotkeyforBrightnessadjustment.•
6. Input Select Button:
UsethishotkeytoswitchfromVGA,DVI,HDMIandDisplayPortinput•signal.
Press (InputSelectbutton)todisplayHDMIsignalsafteryouconnectHDMIcablewiththemonitor.
7. PowerButton/PowerIndicator:
Pressthisbuttontoturnthemonitoron/off.•
The color definition of the power indicator is as the below table.•
Status Description Blue ON Amber Standbymode OFF OFF
1-5ASUSLCDMonitorVE276Q/VK276QSeries
1.5.2 Rear of the LCD monitor
Screw Holes for VESA Wall Mount
Rear connectors1 2 3 4 5 6
7
8
1 AC-IN port2 DisplayPort3 HDMI-IN port4 DVI port5 VGA port6 Audio Line-in port7 Earphone-out port8 USB-IN port (Only available for model VK276Q)
2-1 Chapter 2: Setup
2.1 Detaching the arm/stand (for VESA wall mount)
ThedetachablestandoftheVE276Q/VK276QSeriesLCDmonitorisspeciallydesigned for VESA wall mount.
To detach the arm/stand:1. Disconnectpowerandsignalcables.Carefullyput the front of the monitor
face down on a clean table.
2. Useascrewdrivertoremovethe two screws that secure the stand to the monitor.
3. Detach the stand from the monitor.
• Werecommendthatyoucoverthetablesurfacewithsoftclothtopreventdamage to the monitor.
• Holdthestandofthemonitorwhileremovingthescrews.
TheVESAwallmountkit(100x100mm)ispurchasedseparately.•
UseonlytheULListedWallMountBracketwithminimumweight/load7.9•Kg(Screwsize:4x12mm).
2-2ASUSLCDMonitorVE276Q/VK276QSeries
2.2 Adjusting the monitorForoptimalviewing,werecommendthatyoulookatthefullfaceofthe•monitor,thenadjustthemonitortotheanglethatismostcomfortableforyou.
Hold the stand to prevent the monitor from falling while changing its angle.•
Youcanadjustthemonitor’sanglefrom-5˚to20˚.•
-5 ~ 20
2.3 Install LifeFrame 2 software
ASUSVK276Qseriesprovidestheeasy-to-useLifeFrame 2 software that can work withthewebcam,allowinguserstocreatetheirownphotosorvideoclips.
• TheLifeFrame 2softwarecurrentlysupportsMicrosoft® Windows®7/Vista/XPServicePack2operatingsystems.
• TheLifeFrame 2 software is bundled in the support CD.
Installation instructions1. Close all other applications.
2. Insert the support CD into the optical drive and run the LifeFrame 2 program.
3. Follow the on-screen instructions to complete the installation.
3-1 Chapter3:GeneralInstruction
3.1 OSD (On-Screen Display) menu
3.1.1 HowtoreconfigureVE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB
PresstheMENUbuttontoactivatetheOSDmenu.1.
Press 2. and to navigate through the functions. Highlight and activate thedesiredfunctionbypressingtheMENUbutton.Ifthefunctionselectedhasasub-menu,press and again to navigate through the sub-menu functions.Highlightandactivatethedesiredsub-menufunctionbypressingtheMENUbutton.
Press 3. and to change the settings of the selected function.
ToexittheOSDmenu,pressthe4. button. Repeat step 2 and step 3 to adjustanyotherfunction.
3.1.2 OSD Function IntroductionSpendid1. Thisfunctioncontainssixsub-functionsthatyoucanselectforyourpreference.EachmodehastheResetselection,allowingyoutomaintainyoursettingorreturntothepresetmode.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Scenery Mode
Standard Mode
Theater Mode
Game Mode
Night View Mode
sRGB
Scenery Mode• :ThisisthebestchoiceforsceneryphotodisplayingwithSPLENDID™VideoEnhancement.
3-2ASUSLCDMonitorVE276Q/VK276QSeries
Standard Mode• : This is the best choice for document editing with SPLENDID™VideoEnhancement.
Theater Mode• : This is the best choice for movie watching with SPLENDID™VideoEnhancement.
Game Mode• :ThisisthebestchoiceforgameplayingwithSPLENDID™Video Enhancement.
Night View Mode• :Thisisthebestchoiceforplayingdark-scenegameorwatchingmoviewithSPLENDID™VideoEnhancement.
In the • Standard Mode and sRGB,theSaturation,Color Temp.,Skin Tone,Sharpness,andASCR functions are not user-configurable.
2. ColorSelecttheimagecoloryoulikefromthisfunction.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Brightness
Contrast
Saturation
Color Temp
90
80
User Mode
Skin Tone
Brightness• : The adjusting range is from 0 to 100. The button is also a hotkeytoactivatethisfunction.
Contrast• : The adjusting range is from 0 to 100.
Saturation• : The adjusting range is from 0 to 100.Color Temp.• :Containsthreepresetcolormodes(Cool,Normal,Warm)andoneUserMode.
Skin Tone• :ContainsthreecolormodesincludingReddish,Natural,andYellowish.
IntheUserMode,colorsofR(Red),G(Green),andB(Blue)areuserconfigurable; the adjusting range is from 0 ~ 100.
3-3 Chapter3:GeneralInstruction
3. ImageYoucanadjusttheimageSharpness,TraceFree,AspectControl,Position(VGAonly),andFocus(VGAonly)fromthismainfunction.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Focus
Sharpness
Trace Free
Aspect Control
ASCR
50
0
Full
Position
Sharpness• : Asjusts the picture sharpness. The adjusting range is from 0 to 100.
Trace Free• : SpeedsuptheresponsetimebyOverDrivetechnology.Theadjusting range is from lower 0 to faster 100.
Aspect Control• :Adjuststheaspectratioto“Full”,“4:3”,“1:1”,or“OverScan”(OnlyavailableforHDMIinput).
ASCR• :SelectYESorNOtoenableordisabledynamiccontrastratiofunction.
Position• :Adjuststhehorizontalpostition(H-Position)andtheverticalposition(V-Position)oftheimage.Theadjustingrangeisfrom0to100(OnlyavailableforVGAinput).
Focus• :ReducesHorizonal-linenoiseandVertical-linenoiseoftheimagebyadjusting(Phase)and(Clock)separately.Theadjustingrangeisfrom0to100(OnlyavailableforVGAinput).
4. SoundAdjuststhesoundsettingstoyourpreference.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Volume
Bass
Treble
Balance
50
50
50
50
OFFMute
3-4ASUSLCDMonitorVE276Q/VK276QSeries
Volume• : Adjusts the output volume level. The buttonisalsoahotkeyto activate this function.
Bass• : Adjusts the output bass level.
Treble• : Adjuststhe output treble level.
Balance• : Adjusts the balance between the left and right front speakers.
Mute• : Mutes the output volume.
5. PIP SetingsThePIPSettingsallowsyoutoopenupanothersub-windowconnectedfromanothervideosourcebesidesthemain-windowfromyouroriginalvideosource.Byactivatingthisfunction,youcanhavetwopicturesfromtwodiferentvideosourcesdisplayedbyonemonitor.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
PIP Mode
PIP Source
Size
Position
OFF
Swap
PIP Mode• : Turns the PIP function on or off.
PIP Source• :SelectsthevideoinputsourcefromVGA,DVI,HDMI,orDisplayPortconnector.
Size• :AdjuststhePIPsize.Theoptionsare:Small,Middle,orLarge.
Position• : Adjusts the PIP postion in the main-window. The options are: Right-Top,Left-Top,Right-Bottom,orLeft-Bottom.
SWAP• : Swaps the source of the main and sub-window.
Both the DVI and HDMI input sources should not be selected each for theMainandPIPsourcesimultaneously.
Main-Channel
Sub-Channel
VGA DVI HDMI DisplayPortVGA • • •DVI • X •
HDMI • X •DisplayPort • • •
3-5 Chapter3:GeneralInstruction
6. Input SelectSelect the input source from VGA,DVI,HDMI,orDisplayPort.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
VGA
DVI
HDMI
DisplayPort
7. System SetupAdjuststhesystemconfiguration.
VE276
Splendid
Color
Image
Sound
PIP Settings
Input Select
Move Menu Exit
System Setup
Language
All Reset
Splendid Demo Mode OFF
OFF
English
AI Light
OSD Setup
Information
Splendid Demo Mode• : Activate the demo mode for the Splendid function.
AI Light• :Automaticallyadjustthescreenbacklightaccordingtothe surroundings. The monitor backlight will turn brighter in a bright surroundings,orturndarkerinadarksurroundings.Asthelightsensorislocatedonthetopofthemonitor,donotblockthesensingarea.
OSD Setup• :Adjuststhehorizontalpostition(H-Position),verticalposition(V-Position),OSDTimeout,DDD/CI,andTransparencyoftheOSDscreen.
Information• :Displaysthemonitorinformation.
Language• :SelectsOSDlanguage.TheselectionsareEnglish,French,German,Spanish,Italian,Dutch,Russian,TraditionalChinese,SimplifiedChinese,andJapanese.All Reset• :Setto“Yes”torevertallsettingstothefactorydefaultmode.
3-6ASUSLCDMonitorVE276Q/VK276QSeries
3.2 Specifications
Model VE276Q VK276QPanelSize 27.0”W(68.6cm) 27.0”W(68.6cm)
Max.Resolution 1920x1080 1920x1080
Brightness(Max.) ≧300cd/㎡ ≧300cd/㎡
IntrisincContrastRatio(Max.) ≧1000:1 ≧1000:1
ViewingAngle(CR=10) ≧160°(V);≧170°(H) ≧160°(V);≧170°(H)
DisplayColors 16.7M(6bitHiFRC) 16.7M(6bitHiFRC)
Response Time 2ms(GraytoGray) 2ms(GraytoGray)
Webcam(built-in) - 2.0M
Satellite Speaker 3Wx2stereo 3Wx2stereo
Earphone Output Yes Yes
Sound from HDMI Yes Yes
HDMI input Yes Yes
DVI input DVI with HDCP DVI with HDCP
D-Sub input Yes Yes
DisplayPortinput Yes Yes
Audio Line-in Yes Yes
PowerONConsumption 75W 75W
Tilt -5° ~ +20° -5° ~ +20°
VESA Wall Mounting Yes(100mmx100mm) Yes(100mmx100mm)
Phys.Dimension(WxHxD) 643x445.6x220 643x459.6x220
BoxDimension(WxHxD) 732x560x176 732x560x176
NetWeight(Esti.) 7.2 kg 7.2 kg
GrossWeight(Esti.) 10.5 kg 10.5 kg
Voltage Rating AC100~240V(Built-in) AC100~240V(Built-in)
*Specificationsaresubjecttochangewithoutnotice.
3-7 Chapter3:GeneralInstruction
3.3 Troubleshooting (FAQ)
Problem Possible Solution
PowerLEDisnotON Press the • button to check if the monitor is in the ONmode.Checkifthepowercordisproperlyconnectedtothe•monitor and the power outlet.
The power LED lights amber and there is no screen image
Check if the monitor and the computer are in the •ONmode.Makesurethesignalcableisproperlyconnected•the monitor and the computer.Inspect the signal cable and make sure none of the •pins are bent.Connect the computer with another available •monitortocheckifthecomputerisproperlyworking.
Screen image is too light or dark Adjust the Contrast and Brightness settings via •OSD.
Screen image is not centered or sizedproperly
Press the • button for two seconds to automaticallyadjusttheimage.Adjust the H-Position or V-Position settings via •OSD.
Screen image bounces or a wave pattern is present in the image
Makesurethesignalcableisproperlyconnectedto•the monitor and the computer.Moveelectricaldevicesthatmaycauseelectrical•interference.
Screen image has color defects (whitedoesnotlookwhite)
Inspect the signal cable and make sure that none of •the pins are bent.Perform Reset via OSD.•AdjusttheR/G/BcolorsettingsorselecttheColor•Temperature via OSD.
Screenimageisblurryorfuzzy Press the • button for two seconds to automaticallyadjusttheimage(forVGAmodeonly).Adjust the Phase and Clock settings via OSD.•
Nosoundorsoundislow Ensurethattheaudiocableisproperlyconnectedto•the monitor and the computer.Adjustthevolumesettingsofbothyourmonitorand•computer.Ensure that the computer sound card driver is •properlyinstalledandactivated.
Webcam is not working MakesurethatyouhaveconnectedtheUSB2.0•cablesecurelytoboththeLCDmonitorandyourcomputer.MakesurethatyouusetheMicrosoftWindows•Vista/XPServicePack2operationsystems.
3-8ASUSLCDMonitorVE276Q/VK276QSeries
3.4 Supported Timing ListPC Supported Primary Timing
ModeInput
Aspect Ratio
Resolution H(KHz) V(Hz) Pixel (MHz)
VGA 4:3
640x480,60Hz 31.469 59.94 25.175
640x480,72Hz 37.861 72.809 31.5
640x480,75Hz 37.5 75 31.5
640x480,85Hz 43.269 85.008 36
SVGA 4:3
800x600,56Hz 35.156 56.25 36
800x600,60Hz 37.879 60.317 40
800x600,72Hz 48.077 72.188 50
800x600,75Hz 46.875 75 49.5
800x600,85Hz 53.674 85.061 56.25
XGA 4:3
1024x768,60Hz 48.363 60.004 65
1024x768,70Hz 56.476 70.069 75
1024x768,75Hz 60.023 75.029 78.75
1024x768,85Hz 68.677 84.997 94.5
SXGA4:3
1152x864,75Hz 67.5 75 108
1280x960,60Hz 60 60 108
5:41280x1024,60Hz 63.981 60.02 1081280x1024,75Hz 79.976,P 75.025 135
WXGA+ 16:101440x900,60Hz 55.935 59.887 106.51440x900,75Hz 70.635 79.984 136.75
WSXGA+ 16:10 1680x1050,60Hz 65.29 59.954 146.251080P 16:9 1920x1080,60Hz 67.5 60 148.5
IBM Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)
ModeInput
Aspect Ratio
Resolution H(KHz) V(Hz) Pixel (MHz)
DOS640x350,70Hz 31.469 70.087 25.175
640x350,85Hz 37.861 85.08 31.5
DOS720x400,70Hz 31.469 70.087 28.322
720x400,85Hz 37.927 85.039 35.5
MAC Modes, Factory Preset Timing(D-SUB, DVI-D, HDMI inputs)
ModeInput
Aspect Ratio
Resolution H(KHz) V(Hz) Pixel (MHz)
VGA 4:3 640x480,67Hz 35 66.667 30.24SVGA 4:3 832x624,75Hz 49.725 74.551 57.2832
3-9 Chapter3:GeneralInstruction
VESA Modes, User Available Timing
ModeInput
Aspect Ratio
Resolution H(KHz) V(Hz) Pixel (MHz)
720P16:9 1280x720,60Hz(RB) 44.444 59.979 6416:9 1280x720,60Hz 44.772 59.855 74.516:9 1280x720,75Hz 56.456 74.777 95.75
WXGA
1280x768,60Hz(RB) 47.396 59.995 68.2516:10 1280x800,60Hz(RB) 49.306 59.91 7116:10 1280x800,60Hz 49.702 59.81 83.516:10 1280x800,75Hz 62.795 74.934 106.5
WSXGA+16:10 1440x900,60Hz(RB) 55.469 59.901 88.7516:10 1440x900,75Hz 70.635 79.984 136.75
WSXGA+ 1680x1050,60Hz(RB) 64.674 59.883 1191080P 16:9 1920x1080,60Hz 66.587 59.934 138.5
HDMI Supported Primary TimingVESA Modes, Factory Preset Timing
ModeInput
Aspect Ratio
Resolution H(KHz) V(Hz) Pixel (MHz)
480i4:3 720(1440)x480i,59.94/
60Hz15.734/15.75 59.94/60 27/27.027
16:9 720(1440)x480i,59.94/60Hz
15.734/15.75 59.94/60 27/27.027
480P
4:3 640x480P,59.94/60Hz 31.469/31.5 59.94/60 25.175/25.2
4:3 720x480P,59.94/60Hz 31.469/31.5 59.94/60 27/27.027
16:9 720x480P,59.94/60Hz 31.469/31.5 59.94/60 27/27.027
576i4:3 1440x576i,50Hz 15.625 50 27
16:9 1440x576i,50Hz 15.625 50 27
576P4:3 720x576P,50Hz 31.25 50 27
16:9 720x576P,50Hz 31.25 50 27
720P16:9 1280x720P,50Hz 37.5 50 74.2516:9 1280x720P,59.94/60Hz 44.955/45 59.94/60 74.176/74.25
1080i16:9 1920x1080i,50Hz 28.125 50 74.25
16:9 1920x1080i,59.94/60Hz 33.716/33.75 59.94/60 74.176/74.25
HDMI Supported Optional Timing
ModeInput
Aspect Ratio
Resolution H(KHz) V(Hz) Pixel (MHz)
480P4:3 1440x480P,59.94/60Hz 31.469/
31.5 59.94/60 54/54.054
16:9 1440x480P,59.94/60Hz 31.469/31.5 59.94/60 54/54.054
576P4:3 1440x576P,50Hz 31.25 56.25 54
16:9 1440x576P,50Hz 31.25 50 54
1080P16:9 1920x1080P,50Hz 56.25 50 148.5
16:9 1920x1080P,59.94/60Hz 67.433/67.5 59.94/60 148.352/148.5
* The modes not listed in the above tables may not be supported. For optimal resolution, we recommend that you choose a mode listed in the above tables.
3-10ASUSLCDMonitorVE276Q/VK276QSeries