Manufacturer of Heat Exchanger Air Receivers

Pressure vessel Air Dryer By Abacus Engineering

Abacus Engineering

http://abacusengg.

com

Abacus is the leader in design and manufacture of

Heat Transfer Equipments and Industrial Chilling Equipments. We have the services for Thermal Designing, Mechanical Designing, Fabrication, Drawings, Site Installation Designing facilities We have fully equipped Design Department capable of doing thermal and mechanical designs of all offered equipment in house and thereafter generating fabrication drawings of the same. The designing is done as per various design codes viz. IS,ASME,TEMA,API,ASHRAE, BS etc. We have extensive computer hardware and software to facilitate our designing as well as other areas of concern within the organization. Strength In house Detailed Engineering for all manufactured items, i.e. Process(Thermal) Design, Mechanical Design and Fabrication Drawings, fully utilizing the modern tools of Computer Aided Designing is where the real strength of Abacus lies.

About US http://abacusengg.com

PRODUCTS Tube Heat Exchangers Air Cooled Heat Exchanger Inter / After / Oil Coolers U' & Straight Tube Bundles Pressure Vessels Columns Reactors Process Condensers Chemical Storage Vessels Clarifiers / Economizers Air Receivers Hot Water Generators De-Super Heaters / Pre

Heaters Water Cooled Chillers

Air / Gas Chilling Units Brine / Glycol Chillers Air Dryers Air Conditioning Equipments Water / Air Cooled Condensers DX / Flooded Chillers Refrigeration Equipments Heating Units / Equipments Air Cooling & Ventilation

Systems Oil Chilling Unit Co2 Liquefiers Walk-In Cold Rooms up to

(-)40oC Air Cooled Chillers

Major raw material is in the form of plates, pipes and tubes. Carbon Steels

used is confirming to is, ASME etc. viz. SA 515 / 516Gr 60 / 70, SA 105, SA 266 GR 2, IS 2002-2, IS 2062 GR A, SA 210,SA 179, SA 106-B, SA 333 GR 6 etc. shell thickness up to 50 MM, tubes sheets up to 150 MM and tubes up to 2.5" OD. Stainless steels used is confirming to SA 240, SA 213, SA 312, SA182 Grades 304, 304L, 316, 316L, 316TI, 321, 347, duplex SA 2205etc. shell thickness up to 40 MM, tubes sheets up to 150 MM and tubes up to 2.5" OD. Lots of other non ferrous materials also form part of regular production such as, Copper, Brass, Naval Brass, Admiralty Brass, Phosphorous Bronze, Al. Bronze, Cupronickel, Titanium, Monel, Inconel, Has alloy etc. in all grades shell thickness up to 40 mm, tubes sheets up to 150 mm and tubes up to 2.5" OD.

Material http://abacusengg.com

Brine / Glycol Chillers a) Site inspections and Evaluations. b) Replacement of Adsorbents (Alumina and Silica Gel) c) Retrofits, retubing, revamping and upgrades. d ) Replacement parts and instrumentations. e ) Replacement tube bundle & coolers.

After Market Services of Abacus Engg

D-15/4, Okhla Indl. Area, Phase - II,

 New Delhi - 110020 (India)Telephone :( +91 - 11 ) -

98100 07843Fax :( +91 - 11 ) - 26384115 , 

E-mail :mail@abacusengg.com

Web Address :www.abacusengg.com

Our contact REGD. OFFICE