masina za ves upustvo
DESCRIPTION
masinaTRANSCRIPT
-
engl
ish
-
70
warnings
This washing machine comes with amanual that includes operating, maintenanceand installation instructions. Please read allthe instructions before using the washingmachine.
Do not wash items that have previouslybeen cleaned, washed, soaked or treatedwith petrol, solvents for dry cleaning, otherinflammable substances or explosives, asthey produce fumes that could catch fire orexplode.
Do not add petrol, solvents for dry cleaningor other inflammable or explosive substancesto the wash water as they produce fumesthat could catch fire or explode.
Do not repair or replace any part of thewashing machine or try to carry out any typeof servicing unless it is recommended in themaintenance instructions in the manual.
Do not climb onto the machine or standon the open hatch door.
Do not use an extension lead or adaptorto connect your washing machine to themains supply.
The machine should only be used for thepurpose it is designed for.
Follow the washing instructionsrecommended by the manufacturer of thegarment to be washed.
Do not turn your washing machine on untilyou are sure that:
It has been installed in accordance withthe installation instructions.
All the water, drainage, mains electricityand earth connections meet the localregulations and/or other applicableregulations.
To avoid the risk of fire, electric shocks, injury or damage when using your washingmachine, please take the following precautions:
-
71
washing machine
Water inlet hose.
specifications
ACCESSORIES
Powercord
Detergentdispenser
Controlpanel
Stainlesssteel drum
Accesible filter(behind kickplate)
Kickplate
Drain hose
Hatch
Adjustablefeet
Work top
-
72
washing machine
a Remove the screws holding the plasticcovers to the back of the washingmachine.
b Loosen and remove the 3 blockingscrews.
c Cover the holes with the plastic coversyou have just removed.
installation and assembly
Do not throw the blocking screwsaway. You may need to move thewashing machine at a later date.
Imp
ort
ant
a/c
a Remove the base, corner protectors andtop cover.
1 UNPACKING ANDUNBLOCKING THEWASHING MACHINE
UNBLOCKING
UNPACKING
-
73
CONNECTION TO THE MAINS WATER SUPPLY ANDDRAINAGE
The water supply hose is inside the drum:
a Connect the bent end of the hose to thethreaded inlet of the electrovalve locatedat the rear of the washing machine.
b Connect the other end of the hose tothe water intake. Then securely tightenthe connection nut.
installation and assembly
a
a It is recommended that you have a fixeddrainage outlet 50 to 70 cm from thefloor.Avoid the drain hose being too tight,kinked or restricted.
2
CONNECTION TO THEMAINS WATER SUPPLY
DRAINAGECONNECTION
It is important that the drain hosebend is correctly fastened to theoutlet, to prevent any risk of itbecoming detached and causingflooding.
If your washing machine has a hotwater intake, connect the hose withthe red threaded end to the hot watertap, and to the electrovalve with thered filter.
The washing machine must beconnected to the mains water supply,using the new supply hoses suppliedwith the appliance. Do not use watersupply hoses that have been usedbefore. For your washing machine towork properly, the mains waterpressure must be between 0.05 and1MPa (0.05 and 10 Kgr/cm2).
Imp
ort
ant
-
Imp
ort
ant
Use the adjustable feet to level thewashing machine. This will reducethe noise level and prevent it frommoving during use.
Do not bring the feet too far out, youwill achieve better stability.
You need to use a spanner for themodels that have a nut.
Imp
ort
ant
74
LEVELLING THE WASHING MACHINE AND CONNECTINGIT TO THE MAINS ELECTRICITY SUPPLY
installation and assembly3
Consult the specifications plate located on thehatch door of the washing machine beforemaking the electrical connections. Ensure thatthe voltage reaching the plug is the same asthat on the plate.Do not remove the specifications plate.The information on it is important.
ELECTRICAL CONNECTION
LEVELLING
It is very important to correctly earth thewashing machine. The electricalinstallation, plug, socket, fuses orautomatic switch and counter must becorrectly dimensioned for the maximumpower indicated on the specificationsplate.
Do not plug the washing machine pluginto the socket with wet or damp hands.
To remove the power cord, pull on thebody of the plug.
If the power cord is damaged, it must bereplaced by a cord or special unit providedby either the manufacturer or your after-sales service.
With built-in washing machines, the plugmust be accessible after installation.
-
INSTALLING THE WASHING MACHINE UNDER A KITCHENWORKTOP AND PRE-CLEANING
When your washing machine has beencorrectly installed, we recommend that youpre-clean the machine.
This is to check that the installation, theconnections and the drainage are all correct,and to thoroughly clean the inside of thewashing machine before any washprogrammes are run (see the operatinginstructions on the following pages).
a Select the normal programme at 60C.
b Press the Start/Stop button.75
4
PRE-CLEANING
INSTALLATION UNDERA WORKTOP
Your washing machine may be fittedunderneath a kitchen worktop.
If you need to remove the washing machinesworktop, for safety reasons you need to fit aprotection plate which you can obtain fromyour Dealer or Technical Assistance Service.
Follow these steps to fit the plate:
a Remove the washing machine work topby taking out the side screws and movingit gently back.
b Take out the screws and remove theparts holding the worktop in place.
c Put the protection plate into place andscrew it to the washing machine so itcan then be inserted in the place youwish, fitting spongy adhesive all aroundthe perimeter first to prevent noise.
c
O
a
ba
b
-
76
washing machine
a Sort the clothes according to fabricand how they are made:We recommend using the delicateprogrammes for sensitive fabrics. Thereis a special wool programme forwoollens.
b Sort clothes according to how soiledthey are. Wash lightly soiled garments using ashort programme. Use a programme without prewashfor medium-soiled garments. Wash heavily soiled garments using along programme with prewash.
a Sort your clothes according to colour.Wash whites and coloured separately.
using the appliance and practical tips
Important
Before placing the clothes in thedrum, make sure all the pockets areempty.
Any small objects may block the drainpump.
PrewashWash
Wash
PREPARATION
1 PREPARINGGARMENTS FORWASHING
30
60
90
40
Cold
Imp
ort
ant
We recommend loading the washingmachine to its full capacity. Thismeans savings on water and energy.Whenever possible, we recommendthat you wash garments of differentsizes within the same washprogramme. This improves thewashing action and also aids thecorrect distribution of the garmentsin the drum when spin-drying, andthe washing machine will thereforebe quieter.It is a good idea to put small garmentsin a wash bag.
SORTING THE CLOTHES
Imp
ort
ant
Before using the dryingprogramme, first checkthe label on the garmentto make sure it can betumble dried.
Make surebeforehandthat yourwoollens canbe machine-washed.
-
a Your washing machines detergentdispenser has three compartments.
b Put the detergent or additive into thedetergent dispenser before starting thewash programme.
c Liquid detergents may also be used inthis washing machine. An optionaldetergent dispenser is to be used forthis, which can be obtained from theTechnical Service Network.
Place this optional dispenser inside thewash compartment.
The level of liquid must never behigher than the MAX mark printed onthe dispenser wall.
Remember that the amount of detergent tobe used will always depend on:
The amount of clothes to be washed. How heavily the clothes are soiled. The hardness of the water (Information on
water hardness in your area can be obtainedfrom the competent local authorities).
We recommend the use of adecalcifying product if the waterhardness is high in your area.
77
2 USING DETERGENT AND ADDITIVES
eco-note
using the appliance and practical tips
DETERGENT ANDADDITIVES
Impo
rtan
t
Remember that concentrated detergentsexist which are more environment- andnature-friendly.
The use of more detergent thannecessary will not improve youwashing results, and apart from costing
you money it will have a negative effecton the preservation of the
environment.
We therefore recommend you followthe detergent manufacturersinstructions.
Impo
rtan
t
WASH FABRIC SOFTENERPREWASH
a
b
c
-
78
3 SELECTION OF WASHING ANDDRYING PROGRAMMEusing the appliance and practical tips
programmeselectorcommand
start/stopkey
dryingtimekey
centrifugeselectorcommand
detergent dispenser
additional function
intensivewashkey
extrarinsingkey
easyironingkey
To select a wash programme, proceed asfollows:
a Starting from the off 0 position, thewashing machine turns on whenselecting the desired wash programme,(see programme table).
b In the command carrier the End ofProgramme pilot light flashes on and off.
b
O Celeris 30Celeris 30a
O
-
79
using the appliance and practical tips
There are five types of programme:
Normal programmesAuxiliary programmesWool programmesDelicate programmesDrying programmes
eco-noteWe recommend you choose a washprogramme without prewash wheneverpossible. This will save you money andhelp protect the environment.
The procedure for selecting the drying timeis as follows:
a Select drying time in minutes using thedrying time button.
The time will appear on the display,increasing each time the drying timebutton is pressed.
If you select a wash + dry option, theload must not be over 4 kg. (1.5 kg.for delicate wash programmes).
a
Impo
rtan
t
Quick 30CNormal coldNormal 30CNormal 40CNormal 60CNormal 90CPrewash 60C
Auxiliary Wool Delicate
P R O G R A M M E S
Normal
RinsesSpin-drying
Wool 35C Delicate 40CDelicate 30CDelicate cold
1234567
89
10 111213
Drying
Delicate dryNormal dry
1415
-
ProgrammeRecommendedtemperature Fabric type
Max loadof clothes
(Kg)Extra
rinse
Inten
sive
wash
Easy-
iron
Spin
spee
dsel
ectio
n
No sp
in
Anti-c
rease
Cotton/Linenwhites/coloursvery light soil
Cotton/Linendelicate coloursvery light soil
Cotton/Linendelicate colourslight soil
Cotton/Linenfast colourslight soil
Cotton/Linenfast coloursmedium soil
Cotton/Linenwhitesheavy soil
Cotton/Linenwhites/fast coloursheavy soil
Cotton/cotton mixSinthetic/DelicateWool/wool mix
Cotton/cotton mixSinthetic/DelicateWool/wool mix
Wool/wool mixwhites/colourslight soil
Sinthetic/cotton mixdelicate coloursmedium soil
Sinthetic/cotton mixdelicate colourslight soil
Sinthetic/cotton mixdelicate coloursvery light soil
Sinthetic/mixed fabrics
Cotton/Linen
(*) Programme for wash and energy consumption assessment in accordancewith standard EN60456, press intensive wash button.
1
2
3
4
5 (*)
6
7
8
9
10
11
12
13
14
15
Quick 30C
Normal cold
Normal 30C
Normal 40C
Normal 60C
Normal 90C
Prewash 60C
Rinses
Spin-drying
Wool 35C
Delicate 40C
Delicate 30C
Delicate cold
Delicate dry
Normal dry
Nor
mal
pro
gram
mes
Del
icat
e p
rogr
amm
esW
ool P
.A
uxili
ary
prog
.
Possible option buttons
Cold
WOOL 35
Cold
YES
YES
YES
NO
NO
NO
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO NO
Dry
ing
prog
.
80
30
-
Washproduct
compartment
Programmedescription
Total consumptionkWh/litres
Max loadof clothes
(Kg)Anti-c
rease
Normal wash, rinses,automatic additive absorption ifdesired and long final spin
Drain and long final spin
Rinses, automatic additiveabsorption if desired andlong final spin
Delicate wash, rinses,automatic additive absorption ifdesired and gentle final spin
Prewash, normal wash, rinses,automatic additive absorption ifdesired and long final spin
Normal wash, rinses,automatic additive absorption ifdesired and long final spin
SHORT wash, rinses,automatic additive absorption ifdesired and long final spin
81
NOTE: the KWh and litre consumptions and programme durations may vary depending on thetype and amount of clothes, mains water pressure, etc.
1,5
6
6
6
6
6
6
6
6
1
3
3
3
1,5
4
3
Approx.duration(minutes)
0,20/30
0,15/49
0,40/49
0,65/49
1,02/49
1,90/55
1,45/60
0,05/30
0,05/0
0,50/60
0,60/55
0,35/55
0,15/55
1,2/26
2,8/48
1,8/27
30
60
82
87
91
120
105
23
10
40
60
55
55
95
160
100
WOOL wash, rinses,automatic additive absorption ifdesired and gentle final spin
Delicate dry
Normal dry
-
82
4 SELECTING THE ADDITIONAL FUNCTIONSusing the appliance and practical tips
SPIN-DRYING
This option, specially recommended for heavilysoiled, stained clothes, achieves better resultsby extending the normal wash cycle.
The selected programme is associated withcentrifuge revolutions.
a It can be changed by turning thecentrifuge selector command.
b Elimination of centrifugeBy turning the centrifuge selectorcommand we come to the centrifugeelimination command. A programmewithout final centrifuge; it is used foravoiding the formation of creases inspecial fabrics.
INTENSIVE WASH
The washing process stops at the last rinse,leaving clothes soaked in water. To finish theprogramme select the spin speed desired andpush the Start/Stop button.It is used, for example, when you are not athome and want to delay the spin-drying untilyou get home, to prevent the clothes creasingafter spin-drying and being left in the drum tobe removed.
STOP/ANTI-CREASE
a b
-
83
using the appliance and practical tips
Increases the level of the final rinse obtainedin the clothes; suitable for large loads andgarments belonging to people with sensitiveskin. Increases water consumption!
EXTRA RINSE
This option avoids the formation of creases inthe garments by the operation of a specialprogramme with special turns to soften theclothes after the centrifuge so as to makeironing easier.
EASY IRONING
To start the washing machine push theStart/Stop button.
STARTING UP
Switching the program selection dial to the0 position turns the machine off.
OFF
O
-
84
5 WASH/DRY PROGRAM STATUS AND POWER CUTSusing the appliance and practical tips
PROGRAMMEPHASES
Once started, current programme status andtime remaining till completion can beascertained from the screen.
The active phases will appear successively atthe top of the display as the programmeprogresses. The time remaining until the endof the programme will also appear on thedisplay. It updates at regular intervals, but notminute by minute.
Any option button can be selected providedthe wash phase in which it takes effect hasnot been passed and when the programmeaccepts the option.
Pressing the start/stop button during the washactivates the PAUSE function.
POWER CUTS
If there is a power cut, the washing machinewill continue to operate from the point at whichit stopped when power is reconnected (itsmemory lasts for a few hours).
warnings Level the washing machine by adjusting the
feet to reduce the noise caused by spin-drying.
Try and wash clothes of different sizes inthe same wash programme to favour thedistribution of the clothes inside the drumduring spin-drying.
All the models have a safety system forspin-drying that prevents spin-drying frombeing carried out if the distribution of theclothes inside the drum is too concentrated.This prevents the appliance from vibrating toomuch.If you find that the clothes are not properlywrung out, try spin-drying them again afterhaving distributed the clothes more evenly inthe drum.
If the programme is changed on theselector dial during the washing anddrying process, the washer-dryer willgo onto PAUSE status and theprogramme will be cancelled.
If you need to add or remove agarment, press the start/stop buttonand make sure that the water level isnot above the door overflow level andthat the temperature inside is nothigh. Press the start/stop button againto restart the wash from the samecycle phase it had stopped at.
Imp
ort
ant
-
85
washing machinemaintenance and cleaningAfter each wash, leave the door openfor a while to allow the air to circulatefreely inside the machine.
From time to time, depending on thehardness of your water, it isrecommendable to run a full wash cycleusing a decalcifying product. This willextend the life of your washingmachine.
MAINTENANCE
The washing machine should bedisconnected from the mainselectricity supply before any cleaningor maintenance is carried out.
Clean the detergent dispenser wheneverthere is any washing product residue leftinside.
a Pull outwards on the detergentdispenser to remove it completely.
b Use warm water and a brush toclean the compartments.
c Also clean the additivecompartment siphons, havingremoved them first. Once theyhave been cleaned, put them backmaking sure that they fit right in tothe back.Put the dispenser back into thewashing machine.
A dirty or incorrectly fitted siphon willprevent the additives from being takenin and leave water inside thecompartment at the end of the wash.
Impo
rtan
tIm
port
ant
1 CLEANING THE DETERGENT DISPENSER
c
a
b
-
CLEANING THE ACCESISBLE FILTERAND THE OUTSIDE
maintenance and cleaning
To avoid burns, do not carry out thisoperation when the wash water is ata temperature of over 30C.
When there have been spillages ofdetergent or additives from thedispenser onto the washing machinecabinet, clean them up right away asthey are corrosive.
Clean the accessible filter if the drain pumpis blocked by any foreign objects.
a Remove the kickplate by pulling gentlyon its edges and turning it downwards,to release the clips.If you do not have access from the side,insert a small screwdriver into the threeslots at the top of the kickplate, in orderto get leverage and release the clips.
b Place a container under the drain pumpfilter to collect any water that comes outof it.
c Half- or quarter-turn the filter to the left.Water will start to come out.
d When all the water has drained out ofthe washing machine, turn the filterseveral times until it can be completelyremoved by gently pulling on it.
e Remove the objects or fluff caught in thefilter or the drain pump.
f Put the filter and kickplate back in placeagain.
86
2
Impo
rtan
t
Impo
rtan
t
CLEANING THE OUTSIDE
CLEANING THE FILTER
The outside of the washing machine shouldbe cleaned with warm soapy water or a gentlecleaning agent. Do not use abrasive cleaningproducts or solvents.It should then be thoroughly dried with a softcloth.
c
d
a
b
e
-
washing machinesafety and troubleshooting
87
Never open up theappliance. There is no fuseor similar component insidethat can be replaced by theuser.Im
po
rtan
t
If you detect any problems withyour washing machine, you willprobably be able to rectify themyourself by consulting the followinginstructions.
If this is not the case, unplug theappliance and contact theTECHNICAL ASSISTANCESERVICE.
This may be due to the following:
Check the door is properly shut.
The washing machine is not plugged into the mains orthere is no voltage in the mains supply.
The Start/Stop button has not been pressed.
If the washing machine door is not properly shut, F04will appear on the display.
This may be due to the following:
The blocking and transport screws have not beenremoved.
The washing machine has not been correctly levelled.
Indicator
FO1
FO2
CO3
FO4
FO5.....
F10
Problems
No water coming in
Does not drain or spin-dry
Does not spin-dry
Does not start
Call the Technical Assistance Service
PROBLEMS
Why wont the washingmachine start?
Why is the washing machinevibrating or making toomuch noise?
-
safety and troubleshooting
88
Why doesnt the washingmachine take in water?
Why doesnt the washingmachine drain or spin-dry?
Why doesnt the washingmachine spin-dry?
Why cant I see any water inthe drum during the wash?
Indicator F01, no water coming in, this may be due toa cut in the water supply, a tap turned off or a blockedwater inlet filter.
The possible solutions are as follows: wait for the watersupply to be reconnected, turn on the tap, or removethe water inlet hose and clean the filter.If this failure is detected, F01 will appear on the display.
The reasons for the F02 indicator may be the following:washing machine drain pump blocked, building drainagepipes blocked, or incorrect pump electrical connection.
Solution: if the pump is blocked, gain access to it asdescribed in section 2, maintaining and cleaning theappliance.If this failure is detected, F02 will appear on the display.
This may be due to an uneven distribution of clothesin the drum and may cause an excessive level ofvibrations.
The solution is to select a spin-drying programme.If this failure is detected, C3 will appear on the display.
This is due to the fact that the washing machine is providedwith a system which is able to adapt to the load and typeof fabrics, adjusting the levels of water and energy used,in order to preserve the environment.So, although the water level you can see through the hatchmay look low, there is no cause for concern as washingand rinsing efficiency will still be optimum.
-
89
safety and troubleshooting
This may be because the dispenser needs cleaning. Thissimple operation is described in Maintaining and cleaningthe appliance.1- Cleaning the detergent dispenser.
Washing machines today are provided with safety systemsfor users. One of them is that the washing machine cannotbe opened until it is certain that the drum is quite still. Thisis why the hatch cannot be opened for 2 minutes.
This time is for guidance purposes only and may be affectedby the conditions under which the selected programme isbeing run, e.g. initial water temperature, size of load orunbalance caused by the garments during spin drying.
The washing machine can detect other indications. Whenthis happens a number of other indicators appear on thedisplay: F05, F06..., F10. If this happens, call the OfficialTechnical Service.
Why is there still some waterin the dispenser?
Why cant I open the hatchimmediately after the washhas finished?
Why doesnt the remainingtime shown on the clockcoincide with the real timeleft until the selected cyclefinishes?
Other indications
-
When your appliance is of no further use, it shouldnot be disposed of together with general domesticwaste.
It can be taken, free of charge, to a specific wastecollection centre, run by your local authority, ordealers who provide this service.
Disposing of waste domestic appliances separatelymeans avoiding possible negative consequencesfor the environment and health, derived fromincorrect disposal. This will enable the materialsin them to be treated and recycled, obtainingimportant savings in energy and resources.
To highlight the obligation of collaborating withselective waste collection, the product is markedwith a symbol to warn against using traditionalcontainers for disposing of the appliance.
For further information, contactyour local authority or the shopwhere you purchased the product.
INFORMATION FOR THE CORRECT DISPOSAL OF WASTE ELECTRICAL ANDELECTRONIC APPLIANCES
eco-note
environmental warnings
90
-
09-06 LJ6A029Q5