material safety data sheet metalized bopp … · material safety data sheet ( metalized bopp film)...

9 Peach Tree Hill Road Livingston, NJ 07039 Tel: 800-426-8677 Fax: 973-994-8028 Email: [email protected]

of 5

MATERIAL SAFETY DATA SHEET( METALIZED BOPP FILM)

SECTION IIssue Date: April, 2014 Product Name: HM

Amtopp, A Member of the Inteplast Group, LTD.101 Inteplast Blvd./Highway 1593Lolita, TX 77971

Emergency Phone Numbers:

Inteplast Headquarters Livingston, New Jersey1-800-426-8677 x8044

Amtopp Production Plant Lolita, Texas361-874-3238

Product Information:Trade Names and Synonyms: HM, food grade, packaging film

metalized BOPP

Formulas: Proprietary Formulation

Chemical Family: Polyolefin Compound

CAS Registry No: 9003-07-0

SECTION IIHazardous Ingredient

This material safety data sheet has been prepared in compliance with the Federal OSHAHazard Communication Standard 29 CFR 1910 1200. This product does not containingredients which would be considered to be a hazardous chemical under that standard.

InteTopp HM as sold is considered to be a non-respirable solid.


of 5

MATERIAL SAFETY DATA SHEET

SECTION IIIHealth Hazard

Inhalation:Effect:Considered a non-respirable solid. No significant irritation expected other thanpossible mechanical irritation.

First Aid:If adverse effect occurs, remove person(s) to uncontaminated area. Get medicalattention.

Protection:None Required.

Eye:Effect:No significant irritation expected other than possible mechanical irritation.

First Aid:Flush eyes with plenty of water.

Protection:None Required.

Skin:Effect:No significant irritation expected other than possible mechanical irritation.

First Aid:Wash exposed skin with soap and water.

Protection:None required. However, use of protective gloves/clothing is good industrialpractice.

Chronic Effects:None known.


of 5


SECTION IVOccupational Exposure Limits

PEL (OSHA Permissible Exposure Limits):No OSHA PEL has been established for this particular product.

TLV (ACGIH Threshold Limit Value):No ACSIN TLV has been established for this particular product.

SECTION VEmergency First Aid Procedures

Ingestion: No need anticipatedSkin Contact: No need anticipatedEye Contact: No need anticipatedInhalation: No need anticipated

SECTION VIPhysical Data

Boiling Point: Not ApplicableMelting Point: 248 - 338 ºF

120 - 170 ºCVapor Pressure: Not ApplicableWater Solubility: InsolubleSpecific Gravity: Water = 1

0.90 - 0.92Product Appearance: Shiny silver filmProduct Odor: Odorless

SECTION VIIFire and Explosion Hazard

Flash Point: Above 500 ºF260 ºC

Auto-Ignition Temperature: > 735 ºF> 390 ºC


of 5


SECTION VII (continued)Fire and Explosion Hazard

Fire Fighting Procedures:Individuals should perform only those fire fighting procedures for whichthey are trained. Agents approved for Class A hazards (e.g. halogenatedagents, foam, steam) or water fog.

Unusual Fire and Explosion Hazard: None

SECTION VIIIReactivity

Dangerous Reactions: None Identified.Hazardous Decomposition: Thermal decomposition can produce carbon

monoxide, carbon dioxide, and other harmful products.

Stability: Stable unless subjected to extremely strong acids.

SECTION IXEmployee Protection

Protective Clothing: None Required. However, use of protective gloves/clothing isgood industrial practice. Safety glasses meeting thespecification of ANSI Standard 2P7.1.

Respiratory Protection: None Required.

SECTION XEnvironmental Protection

Storage Requirements: No special requirements.Spill or leak: Contain and remove by mechanical means.Waste Disposal: Disposal must be in accordance with applicable Federal, State

or Local Regulations.


of 5


SECTION XIRegulatory Controls

DOT Classification: Non-regulatory commodity.

SECTION XIISara Title III Statement

Sara Title III Section 302:

Extremely Hazardous Substance(s): None

Sara Title III Section 313:

This product does not contain Toxic chemicals above the Deminims levels as listed,which are subject to the reporting requirements of Section 313 of Title III of theSuperfund Amendments and Reauthorization Act of 1986 (Emergency Planning andCommunity Right-To-Know Act and 40 CFR part 372).

This information must be included in all MSDS that are copied and distributed for thismaterial. Do not copy this Material Safety Data Sheet in Part --- You must copy,distribute and use the entire Material Safety Data Sheet.

SECTION XIIIAdditional Information

The information presented herein is believed to be factual as it has been derived from theworks and opinions of persons believed to be qualified experts; however, nothingcontained in this information is to be taken as a warranty or representation for whichAmtopp Corporation bears legal responsibility. The user should review anyrecommendations in the specific context of the intended use to determine whether theyare appropriate.

material safety data sheet metalized bopp … · material safety data sheet ( metalized bopp film)...

Documents