material safety data sheet · notes to physician: treat symptomatically 5. fire-fighting measures...

23

Upload: others

Post on 19-Oct-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point
Page 2: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point
Page 3: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

MATERIAL SAFETY DATA SHEET

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATIONProduct code: S2010Product Name: SODIUM PHOSPHATE, MONOBASIC, DIHYDRATEChemical Name: No information availableSynonyms: Monosodium dihydrogen phosphate dihydrate

Monosodium phosphate dihydratePhosphoric acid, monosodium salt, dihydrate

Recommended use: No information available.CAS #: 13472-35-0RTECS # WA1900500CI#: Not availableFormula: NaH2PO4.2H2OSupplier: Spectrum Chemicals and Laboratory Products, Inc.

14422 South San Pedro St.Gardena, CA 90248(310) 516-8000

Order Online At: https://www.spectrumchemical.comEmergency Telephone Number: CHEMTREC: 1-800-424-9300Contact Person: Ibad Tirmiz (East Coast)Contact Person: Martin LaBenz (West Coast)

2. HAZARDS IDENTIFICATION

Product code: S2010 Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

1 / 10

Personal Protective EquipmentNFPA

See Section 8.

HMIS

Page 4: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

2. HAZARDS IDENTIFICATION

Chronic Potential Health Effects:

Component Carcinogen Status:Sodium Phosphate, Monobasic,Dihydrate13472-35-0 (100)

No information available

Target Organs: No information available

Mutagenic Effects: No information available

Teratogenic Effects: No information available

Aggravated Medical Conditions: No information available

See Section 11 for additional Toxicological Information

POTENTIAL ENVIRONMENTAL EFFECTS

No information available

3. COMPOSITION/INFORMATION ON INGREDIENTS

Components CAS-No. Weight %

POTENTIAL HEALTH EFFECTS

Principal Routes of Exposure:Ingestion. Inhalation.

Acute Potential Health Effects:

OSHA Regulatory Status

Skin Contact:May cause skin irritation.

This material is not considered hazardous by the OSHA Hazard CommunicationStandard (29 1910.1200)

Eye Contact:May cause eye irritation.

Inhalation:May cause irritation of respiratory tract.

Product code: S2010

Ingestion:May cause digestive (gastrointestinal) tract irritation. May cause abdominal pain. May cause vomiting. May causediarrhea.

Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

2 / 10

EMERGENCY OVERVIEWMay cause skin and eye irritation

Color:White.

Odor:Odorless.

Physical state:Solid.

Appearance:Crystals. Crystalline. Crystalline

powder.

Page 5: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

3. COMPOSITION/INFORMATION ON INGREDIENTSSodium Phosphate, Monobasic, Dihydrate 13472-35-0 100

4. FIRST AID MEASURES

General Advice: Poison information centres in each State capital city can provide additionalassistance for scheduled poisons (13 1126)

Skin Contact: Wash off immediately with soap and plenty of water removing all contaminatedclothes and shoes. Get medical attention if irritation develops.

Eye Contact: Flush eye with water for 15 minutes. Get medical attention if irritation occurs. Ifsymptoms persist, call a physician.

Inhalation: Move to fresh air. If breathing is difficult, give oxygen. In case of shortness of breath,give oxygen. Otain medical attention.

Ingestion: Do not induce vomiting without medical advice. Never give anything by mouth to anunconscious person. Consult a physician if necessary.

Notes to Physician: Treat symptomatically

5. FIRE-FIGHTING MEASURES

Flammable Properties

Flashpoint (°C/°F): No information available.

Flash Point Tested according to:Not applicable

Lower Explosion Limit (%): No information availableUpper Explosion Limit (%): No information available

Autoignition Temperature (°C/°F): No information available

Suitable Extinguishing Media: The product is not flammable. If it is involved in a fire,extinguish the fire using an agent suitable for the type ofsurrounding fire.

Unsuitable Extinguishing Media: No information available.

Hazardous Combustion Products: No information available.

Specific hazards: No information available..

Special Protective Equipment for Firefighters: As in any fire, wear self-contained breathing apparatuspressure-demand, MSHA/NIOSH (approved or equivalent)and full protective gear

Specific Methods: No information available.

6. ACCIDENTAL RELEASE MEASURES

3 / 10Product code: S2010 Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

Page 6: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

Personal Precautions:Ensure adequate ventilation. Avoid contact with skin, eyes and clothing. Use personal protective equipment.

Environmental Precautions:Prevent further leakage or spillage if safe to do so. Do not let this chemical enter the environment. Do not let product enterdrains.

Methods for Cleaning Up:Sweep up and shovel into suitable containers for disposal. Clean contaminated surface thoroughly.

7. HANDLING AND STORAGE

Handling

Technical Measures/Precautions:Provide sufficient air exchange and/or exhaust in work rooms. Keep away from incompatible materials.

Safe Handling Advice:Wear personal protective equipment. Avoid contact with skin, eyes and clothing. Do not ingest. Do not breathevapours/dust. Keep away from heat and sources of ignition. Handle in accordance with good industrial hygiene andsafety practice.

Storage

Technical Measures/Storage Conditions:Keep container tightly closed in a dry and well-ventilated place. Store at room temperature in the original container.Store away from incompatible materials.

Incompatible Materials:Acids. Bases. Strong oxidizing agents.

8. EXPOSURE CONTROLS / PERSONAL PROTECTION

Engineering measures to reduce exposure: Ensure adequate ventilation. Use process enclosures, localexhaust ventilation, or other engineering controls to keepairborne levels below recommended exposure limits. If useroperations generate dust, fume or mist, use ventilation tokeep exposure to airborne contaminants below the exposurelimit.

Personal Protective Equipment

Eye protection: Goggles. Safety glasses with side-shields.

Skin and body protection: Long sleeved clothing. Chemical resistant apron. Gloves.

Respiratory protection: Wear respirator with dust filter..

Hygiene measures: Avoid contact with skin, eyes and clothing. Wash hands before breaks andimmediately after handling the product. When using, do not eat, drink or smoke.

National occupational exposure limits

United StatesU.S Occupational Exposure Limits: Not determined

Components OSHA NIOSH ACGIH AIHA WHEEL

Sodium Phosphate, Monobasic,Dihydrate - 13472-35-0

None None None None

4 / 10Product code: S2010 Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

Page 7: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

CanadaCanada Occupational Exposure Limits: Not determined

Components Alberta British Columbia Ontario QuebecSodium Phosphate, Monobasic,

Dihydrate13472-35-0

None None None None

Australia and MexicoOccupational Exposure Limits for Australia and Mexico: Not determined

Components Australia MexicoSodium Phosphate, Monobasic,

Dihydrate13472-35-0

None None

9. PHYSICAL AND CHEMICAL PROPERTIES

10. STABILITY AND REACTIVITY

Stability: Stable at normal conditions

Conditions to avoid: Heat. Incompatible materials.

Incompatible Materials: Acids. Bases. Strong oxidizing agents.

Hazardous decompositionproducts:

Sodium oxides. Phosphorus oxides.

Evaporation rate:No information available

Color:White.

Vapor density:No information available

VOC content (g/L):No information available

Lower Explosion Limit (%):No information available

Odor threshold (ppm):No information available

Partition coefficient(n-octanol/water):No information available

Miscibility:No information available

Upper Explosion Limit (%):No information available

Solubility:Very soluble in waterSolubility in water: 94 g/100 g @ 25 °CInsoluble in Ethanol

Physical state:Solid.

Autoignition Temperature (°C/°F):No information available

Odor:Odorless.

Boiling point/range(°C/°F):No information available

Melting point/range(°C/°F):No information available

Appearance:Crystals. Crystalline. Crystalline powder.

pH:No information available

TasteNo information available

Specific gravity:No information available

Decomposition temperature(°C/°F):60 °C/140 °F

Molecular/Formula weight:156.01

Density (g/cm3):1.9-2

Bulk density:No information available

Product code: S2010 Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

Vapor pressure @ 20°C (kPa):No information available

5 / 10

Flash point (°C):No data available

Page 8: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

Possibility of HazardousReactions:

No information available

Polymerization: Hazardous polymerization does not occur

Corrosivity: No information available

Special Remarks on Corrosivity: No information available

11. TOXICOLOGICAL INFORMATIONAcute Toxicity

Component Information

Product Information

LC50/inhalation/rat No information availableLC50/Inhalation/mouse No information availableLD50/dermal/rabbit No information availableLD50/dermal/rat No information availableLD50/oral/mouse = No information availableLD50/oral/rat = No information available

Local Effects

Skin irritation: May cause skin irritation.

Eye irritation: May cause eye irritation

Inhalation: May cause irritation of respiratory tract.

Ingestion: It is considered a low hazard for usual industrial handling and systemic reactions areunlikely when ingested (because they are slowly and incompletely absorbed in theintestinal tract). The most frequently seen effect is gastrointestinal irritation withabdominal pain and cramping, vomiting, diarrhea. If a significant amount ofphosphate is asborbed, the following may occur: mineral imbalance in the body,adversely affecting the osmotic pressure of body fluids resulting inhyperphosphatemia, hypocalcemia, hypomagnesemia. Severe hyperphosphatemiaand hypocalcemia may result in tetany, seizures, severe dehydration, metabolicacidosis, hypernaturemia, lethargy, and hyperpyrexia, carpal spasm, and possible.May also affect the cardiovascular system (hypotension, tachycardia, bradycardia,dysrhythmias). The estimated fatal dose is 50 grams

Sensitization: No information available

Chronic Toxicity

Chronic Toxicity No information available

Other LD50 or LC50information = >5008 mg/kg intraperitoneal LD50 Mouse

LD50/dermal/rat = No information available

Sodium Phosphate, Monobasic, Dihydrate - 13472-35-0

LD50/dermal/rabbit = No information availableLC50/inhalation/rat = No information available

LD50/oral/mouse = No information available

Product code: S2010 Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

6 / 10

LC50/inhalation/mouse = No infomation available

LD50/oral/rat = No information available

Page 9: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

Carcinogenic effects: Not considered carcinogenic

Components NTP IARC OSHA HCS -Carcinogens

ACGIH - Carcinogens Australia - ProhibitedCarcinogenicSubstances

Australia - NotifiableCarcinogenicSubstances

Sodium Phosphate,Monobasic, Dihydrate

Not listed Not listed Not listed Not listed Not listed Not listed

Mutagenic Effects: No information available

Reproductive Effects: No information available

Teratogenic Effects: No information available

Target Organs: No information available

12. ECOLOGICAL INFORMATION

ECOTOXICITY

Toxicity to terrestrial and aquatic plants and animals: No information available

Ecotoxicity effects: No data available.

Aquatic toxicity: No information available

Mobility: No information available

Persistence and degradability: No information available

Bioaccumulative potential: No information available

13. DISPOSAL CONSIDERATIONS

Waste from residues / unused products:Waste must be disposed of in accordance with Federal, State and Local regulation.

Contaminated packaging:Empty containers should be taken for local recycling, recovery or waste disposal

Components RCRA - F Series Wastes RCRA - K Series Wastes RCRA - P Series Wastes RCRA - U Series WastesSodium Phosphate, Monobasic,Dihydrate

None None None None

14. TRANSPORT INFORMATION

DOTUN-No: Not RegulatedProper Shipping Name: No information availableHazard Class: No information availablePacking Group: NoneSubsidiary Risk: Not applicableMarine Pollutant No data availableERG No: No information availableDOT RQ (lbs): No information available

TDG (Canada)

7 / 10Product code: S2010 Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

Page 10: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

UN-No: Not RegulatedProper Shipping Name: No information availableHazard Class: No information availablePacking Group: No information availableSubsidiary Risk: No information availableDescription: No information available

ADRUN-No: No information availableProper Shipping Name: No information availableHazard Class: No information availablePacking Group: No information availableSubsidiary Risk: No information availableClassification Code: No information availableDescription: No information availableCEFIC Tremcard No: No information available

IMO / IMDGUN-No: Not RegulatedProper Shipping Name: No information availableHazard Class: No information availablePacking Group: No information availableSubsidiary Risk: No information availableDescription: No information availableIMDG Page: No information availableMarine Pollutant No information availableMFAG: No information availableMaximum Quantity: No information available

RIDUN-No: No information availableProper Shipping Name: No information availableHazard Class: No information availablePacking Group: No information availableSubsidiary Risk: No information availableClassification Code: No information availableDescription: No information available

ICAOUN-No: No information availableProper Shipping Name: No information availableHazard Class: No information availablePacking Group: No information availableSubsidiary Risk: No information availableDescription: No information available

IATAUN-No: Not RegulatedProper Shipping Name: No information availableHazard Class: No information availablePacking Group: No information availableSubsidiary Risk: No information availableDescription: No information available

15. REGULATORY INFORMATION

International Inventories

8 / 10Product code: S2010 Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

Page 11: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

Components U.S. TSCA Philippines(PICCS)

KOREA KECL Japan ENCS CHINA Australia(AICS)

EINECS-No.

Sodium Phosphate, Monobasic,Dihydrate

Not Listed Present Not present Not present Present Present Not present

U.S. Regulations

California Prop. 65: Safe Drinking Water and Toxic Enforcement Act of 1986.

Chemicals Known to the State of California to Cause Cancer:This product does not contain a chemical requiring a warning under California Prop. 65. (See table below)

Chemicals Known to the State of California to Cause Reproductive Toxicity:This product does not contain a chemical requiring a warning under California Prop. 65. (See table below)

Components Carcinogen Developmental Toxicity Male ReproductiveToxicity

Female ReproductiveToxicity:

Sodium Phosphate, Monobasic,Dihydrate

Not Listed Not Listed Not Listed Not Listed

CERCLA/SARA

Components CERCLA - HazardousSubstances and theirReportable Quantities

Section 302 ExtremelyHazardous

Substances and TPQs

Section 302 ExtremelyHazardous

Substances and RQs

Section 313 -Chemical Category

Section 313 - Reportingde minimis

Sodium Phosphate,Monobasic, Dihydrate

None None None None None

U.S. TSCA

Components TSCA Section 5(a)2 - Chemicals With SignificantNew Use Rules (SNURS)

TSCA 8(d) -Health and Safety Reporting

Sodium Phosphate, Monobasic,Dihydrate

Not Applicable Not Applicable

Canada

WHMIS hazard class:Non-controlled

Canada Controlled Products Regulation:This product has been classified according to the hazard criteria of the CPR (Controlled Products Regulation) and the MSDS containsall of the information required by the CPR.

Inventory

Components Canada (DSL) Canada (NDSL)Sodium Phosphate, Monobasic,Dihydrate

Not Listed Not Listed

Components CEPA Schedule I - Toxic Substances CEPA - 2010 Greenhouse Gases Subject to ManditoryReporting

Sodium Phosphate, Monobasic,Dihydrate

Not listed Not listed

9 / 10Product code: S2010 Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

Page 12: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

EU Classification

R-phrase(s)R-phrase(s)

Components Classification Concentration Limits: Safety PhrasesSodium Phosphate, Monobasic,Dihydrate

No information

The product is classified in accordance with Annex VI to Directive 67/548/EEC

Indication of danger:None.

16. OTHER INFORMATION

The MSDS format complies with ANSI Z400.1/Z129.1-2010 standards.

Preparation Date: 30-Jan-2015

Reason for revision: Not applicable

Prepared by: Sonia Owen

Literature reference: No information available

All chemicals may pose unknown hazards and should be used with caution. This Material Safety Data Sheet (MSDS)applies only to the material as packaged. If this product is combined with other materials, deteriorates, or becomescontaminated, it may pose hazards not mentioned in this MSDS. The physical properties reported in this MSDS areobtained from the literature and do not constitute product specifications. Information contained herein does not constitutea warranty, whether expressed or implied, as to the safety, merchantability or fitness of the goods for a particular purpose.Spectrum Chemicals & Laboratory Products, Inc. assumes no responsibility for results obtained or for incidental orconsequential damages, including lost profits, arising from the use of these data. No warranty against infringement of anypatent, copyright or trademark is made or implied. It shall be the user's responsibility to develop proper methods ofhandling and personal protection based on the actual conditions of use. While this MSDS is based on technical datajudged to be reliable, Spectrum assumes no responsibility for the completeness or accuracy of the information containedherein.

Product code: S2010 Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

10 / 10

Page 13: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

SAFETY DATA SHEET

Product identifier

Product code: S2010Product Name: SODIUM PHOSPHATE, MONOBASIC, DIHYDRATE

Other means of identification

Synonyms: Monosodium dihydrogen phosphate dihydrateMonosodium phosphate dihydratePhosphoric acid, monosodium salt, dihydrate

CAS #: 13472-35-0RTECS # WA1900500CI#: Not available

Recommended use of the chemical and restrictions on use

Recommended use: No information available.Uses advised against No information available

Supplier: Spectrum Chemicals and Laboratory Products, Inc.14422 South San Pedro St.Gardena, CA 90248(310) 516-8000

Order Online At: https://www.spectrumchemical.com

Emergency telephone number Chemtrec 1-800-424-9300Contact Person: Martin LaBenz (West Coast)Contact Person: Ibad Tirmiz (East Coast)

2. HAZARDS IDENTIFICATION

Classification

This chemical is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)

Not a dangerous substance or mixture according to the Globally Harmonized System (GHS)

Label elements

Hazards not otherwise classified (HNOC)Not Applicable

Other hazards

Not classified

Revision Date: 1/30/2015 Revision Number: G1

Product code: S2010 Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

1 / 11

Preparation Date: 1/30/2015

Page 14: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

Not available

3. COMPOSITION/INFORMATION ON INGREDIENTS

Components CAS-No. Weight % Trade SecretSodium Phosphate, Monobasic, Dihydrate

13472-35-013472-35-0 100 *

4. FIRST AID MEASURES

First aid measuresGeneral Advice: Poison information centres in each State capital city can provide additional

assistance for scheduled poisons (13 1126)

Skin Contact: Wash off immediately with soap and plenty of water removing all contaminated clothes andshoes. Get medical attention if irritation develops.

Eye Contact: Flush eye with water for 15 minutes. Get medical attention if irritation occurs. If symptomspersist, call a physician.

Inhalation: Move to fresh air. If breathing is difficult, give oxygen. In case of shortness of breath, giveoxygen. Otain medical attention.

Ingestion: Do not induce vomiting without medical advice. Never give anything by mouth to anunconscious person. Consult a physician if necessary.

Most important symptoms and effects, both acute and delayedSymptoms May cause eye/skin irritation. Causes digestive (gastrointestinal) tract irritation. Vomiting.

Abdominal pain. May cause diarrhea.

Indication of any immediate medical attention and special treatment neededNotes to Physician: Treat symptomatically

Protection of first-aidersFirst-Aid Providers: Avoid exposure to blood or body fluids. Wear gloves and other necessary protective clothing. Dispose ofcontaminated clothing and equipment as bio-hazardous waste

5. FIRE-FIGHTING MEASURES

Extinguishing Media

Suitable Extinguishing Media: The product is not flammable. If it is involved in a fire,extinguish the fire using an agent suitable for the type ofsurrounding fire.

Unsuitable Extinguishing Media: No information available.

Specific hazards arising from the chemical

Hazardous Combustion Products: No information available.

Specific hazards: No information available..

Special Protective Actions for Firefighters

Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

2 / 11Product code: S2010

Page 15: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

Specific Methods: No information available.

Special Protective Equipment for Firefighters: As in any fire, wear self-contained breathing apparatuspressure-demand, MSHA/NIOSH (approved or equivalent)and full protective gear

6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

Personal Precautions: Ensure adequate ventilation. Avoid contact with skin, eyes and clothing. Use personalprotective equipment.

Environmental precautions Prevent further leakage or spillage if safe to do so. Do not let this chemical enter theenvironment. Do not let product enter drains.

Methods and material for containment and cleaning up

Methods for containment Stop leak if you can do it without risk. Cover with plastic sheet to prevent spreading.

Methods for cleaning up Sweep up and shovel into suitable containers for disposal. Clean contaminatedsurface thoroughly.

7. HANDLING AND STORAGE

Precautions for safe handling

Technical Measures/Precautions:Provide sufficient air exchange and/or exhaust in work rooms. Keep away from incompatible materials.

Safe Handling Advice:Wear personal protective equipment. Avoid contact with skin, eyes and clothing. Do not ingest. Do not breathevapours/dust. Keep away from heat and sources of ignition. Handle in accordance with good industrial hygiene andsafety practice.

Conditions for safe storage, including any incompatibilities

Technical Measures/Storage Conditions:Keep container tightly closed in a dry and well-ventilated place. Store at room temperature in the original container.Store away from incompatible materials.

Incompatible Materials:Acids. Bases. Strong oxidizing agents.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters

National occupational exposure limits

U.S Occupational Exposure Limits: Not determined

United StatesComponents OSHA NIOSH ACGIH AIHA WHEEL

Sodium Phosphate, Monobasic,Dihydrate - 13472-35-0

None None None None

CanadaCanada Occupational Exposure Limits: Not determined

Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

3 / 11Product code: S2010

Page 16: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

Components Alberta British Columbia Ontario Quebec

Sodium Phosphate, Monobasic,Dihydrate - 13472-35-0

None None None None

Australia and MexicoOccupational Exposure Limits for Australia and Mexico: Not determined

Components Australia MexicoSodium Phosphate, Monobasic,

Dihydrate13472-35-0

None None

Appropriate engineering controls

Engineering measures to reduce exposure: Ensure adequate ventilation. Use process enclosures, localexhaust ventilation, or other engineering controls to keepairborne levels below recommended exposure limits. If useroperations generate dust, fume or mist, use ventilation tokeep exposure to airborne contaminants below the exposurelimit.

Individual protection measures, such as personal protective equipment

Personal Protective Equipment

Eye protection: Goggles. Safety glasses with side-shields.

Skin and body protection: Long sleeved clothing. Chemical resistant apron. Gloves.

Respiratory protection: Wear respirator with dust filter..

Hygiene measures: Avoid contact with skin, eyes and clothing. Wash hands before breaks andimmediately after handling the product. When using, do not eat, drink or smoke.

9. PHYSICAL AND CHEMICAL PROPERTIES

Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

4 / 11Product code: S2010

Page 17: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

9. PHYSICAL AND CHEMICAL PROPERTIES

10. STABILITY AND REACTIVITY

Reactivity

Chemical stabilityStability: Stable at normal conditions

Possibility of Hazardous Reactions: Hazardous polymerization does not occur

Conditions to avoid: Heat. Incompatible materials.

Incompatible Materials: Acids. Bases. Strong oxidizing agents.

Hazardous decomposition products: Sodium oxides. Phosphorus oxides.

Other Information

Corrosivity: No information available

Special Remarks on Corrosivity: No information available

Lower Explosion Limit (%):No information available

Upper Explosion Limit (%):No information available

Appearance:Crystals. Crystalline. Crystalline powder.

Autoignition Temperature (°C/°F):No information available

TasteNo information available

Reactive with acidsReacts with basesReactive with oxidizing agents

pH:No information available

Melting point/range(°C/°F):No information available

Formula:NaH2PO4.2H2O

Boiling point/range(°C/°F):No information available

Decomposition temperature(°C/°F):60 °C/140 °F

Specific gravity:No information available

Molecular/Formula weight:156.01

Density (g/cm3):1.9-2

Color:White.

Bulk density:No information available

Vapor pressure @ 20°C (kPa):No information available

Flash point (°C):No data available

Evaporation rate:No information available

Vapor density:No information available

VOC content (g/L):No information available

Flashpoint (°C/°F):No information available.

Odor threshold (ppm):No information available

Physical state:Solid.

Partition coefficient(n-octanol/water):No information available

Viscosity:No information available

Flash Point Tested according to:Not applicable

Miscibility:No information available

Product code: S2010

Odor:Odorless.

Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

5 / 11

Solubility:Very soluble in waterSolubility in water: 94 g/100 g @ 25 °CInsoluble in Ethanol

Page 18: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

11. TOXICOLOGICAL INFORMATION

Information on likely routes of exposure

Principal Routes of Exposure:Ingestion. Inhalation.

Acute Toxicity

Component Information

Product Information

LD50/oral/rat =VALUE- Acute Tox Oral = No information available

LD50/oral/mouse =Value - Acute Tox Oral = No information available

LD50/dermal/rabbitVALUE-Acute Tox Dermal = No information available

LD50/dermal/ratVALUE -Acute Tox Dermal = No information available

LC50/inhalation/ratVALUE-Vapor = No information availableVALUE-Gas = No information availableVALUE-Dust/Mist = No information available

LC50/Inhalation/mouseVALUE-Vapor = No information availableVALUE - Gas = No information availableVALUE - Dust/Mist = No information available

Symptoms

Skin Contact: May cause skin irritation.

Eye Contact: May cause eye irritation.

Inhalation May cause irritation of respiratory tract.

LD50/dermal/rabbit = No information available

Sodium Phosphate, Monobasic, Dihydrate - 13472-35-0

LD50/dermal/rat = No information availableLC50/inhalation/rat = No information available

LD50/oral/mouse = No information available

LC50/inhalation/mouse = No infomation available

Product code: S2010

LD50/oral/rat = No information available

Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

6 / 11

Other LD50 or LC50information = >5008 mg/kg intraperitoneal LD50 Mouse

Page 19: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

Ingestion It is considered a low hazard for usual industrial handling and systemic reactions areunlikely when ingested (because they are slowly and incompletely absorbed in theintestinal tract). The most frequently seen effect is gastrointestinal irritation withabdominal pain and cramping, vomiting, diarrhea. If a significant amount ofphosphate is asborbed, the following may occur: mineral imbalance in the body,adversely affecting the osmotic pressure of body fluids resulting inhyperphosphatemia, hypocalcemia, hypomagnesemia. Severe hyperphosphatemiaand hypocalcemia may result in tetany, seizures, severe dehydration, metabolicacidosis, hypernaturemia, lethargy, and hyperpyrexia, carpal spasm, and possible.May also affect the cardiovascular system (hypotension, tachycardia, bradycardia,dysrhythmias). The estimated fatal dose is 50 grams

Aspiration hazard No information available

Delayed and immediate effects as well as chronic effects from short and long-term exposure

Chronic Toxicity No information availableSensitization: No information available

Mutagenic Effects: No information available

Carcinogenic effects: Not considered carcinogenic

Components ACGIH -Carcinogens

IARC NTP OSHA HCS -Carcinogens

Australia - ProhibitedCarcinogenicSubstances

Australia - NotifiableCarcinogenicSubstances

Sodium Phosphate,Monobasic, Dihydrate

Not listed Not listed Not listed Not listed Not listed Not listed

Reproductive toxicity No data is available

Reproductive Effects: No information availableDevelopmental Effects: No information availableTeratogenic Effects: No information available

Specific Target Organ Toxicity

STOT - single exposure No information availableSTOT - repeated exposure No information availableTarget Organs: No information available

12. ECOLOGICAL INFORMATION

Ecotoxicity

Ecotoxicity effects: No data available.

Persistence and degradability: No information available

Bioaccumulative potential: No information available

Mobility: No information available

Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

7 / 11Product code: S2010

Page 20: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

13. DISPOSAL CONSIDERATIONS

Disposal Methods

Waste from residues / unused products:Waste must be disposed of in accordance with Federal, State and Local regulation.

Contaminated packaging:Empty containers should be taken for local recycling, recovery or waste disposal

Components RCRA - F SeriesWastes

RCRA - K SeriesWastes

RCRA - PSeriesWastes

RCRA - U Series Wastes

Sodium Phosphate, Monobasic, Dihydrate None None None None

14. TRANSPORT INFORMATION

DOTUN-No: Not RegulatedProper Shipping Name: No information availableHazard Class: No information availableSubsidiary Risk: Not applicablePacking Group: NoneERG No: No information availableMarine Pollutant No data availableDOT RQ (lbs): No information available

TDG (Canada)UN-No: Not RegulatedProper Shipping Name: No information availableHazard Class: No information availableSubsidiary Risk: No information availablePacking Group: No information availableDescription: No information available

ADR

UN-No: Not RegulatedProper Shipping Name: No information availableHazard Class: No information availablePacking Group: No information availableSubsidiary Risk: No information availableClassification Code: No information availableDescription: No information availableCEFIC Tremcard No: No information available

IMO / IMDGUN-No: Not RegulatedProper Shipping Name: No information availableHazard Class: No information availableSubsidiary Risk: No information availablePacking Group: No information availableDescription: No information availableIMDG Page: No information availableMarine Pollutant No information availableMFAG: No information availableMaximum Quantity: No information available

Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

8 / 11Product code: S2010

Page 21: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

14. TRANSPORT INFORMATION

RIDUN-No: Not RegulatedProper Shipping Name: No information availableHazard Class: No information availableSubsidiary Risk: No information availablePacking Group: No information availableClassification Code: No information availableDescription: No information available

ICAOUN-No: Not RegulatedProper Shipping Name: No information availableHazard Class: No information availableSubsidiary Risk: No information availablePacking Group: No information availableDescription: No information available

IATAUN-No: Not RegulatedProper Shipping Name: No information availableHazard Class: No information availableSubsidiary Risk: No information availablePacking Group: No information availableDescription: No information available

15. REGULATORY INFORMATION

International Inventories

Components U.S. TSCA KOREA KECL Philippines(PICCS)

Japan ENCS CHINA Australia(AICS)

EINECS-No.

Sodium Phosphate, Monobasic,Dihydrate

Not Listed Not present Present Not present Present Present Not present

U.S. Regulations

California Prop. 65: Safe Drinking Water and Toxic Enforcement Act of 1986.

Chemicals Known to the State of California to Cause Cancer:This product does not contain a chemical requiring a warning under California Prop. 65. (See table below)

Chemicals Known to the State of California to Cause Reproductive Toxicity:This product does not contain a chemical requiring a warning under California Prop. 65. (See table below)

Components Carcinogen Developmental Toxicity Male ReproductiveToxicity

Female ReproductiveToxicity:

Sodium Phosphate, Monobasic,Dihydrate

Not Listed Not Listed Not Listed Not Listed

CERCLA/SARA

Components CERCLA - HazardousSubstances and theirReportable Quantities

Section 302 ExtremelyHazardous

Substances and TPQs

Section 302 ExtremelyHazardous

Substances and RQs

Section 313 -Chemical Category

Section 313 - Reportingde minimis

Sodium Phosphate,Monobasic, Dihydrate

None None None None None

Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

9 / 11Product code: S2010

Page 22: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

U.S. TSCA

Components TSCA Section 5(a)2 - Chemicals With SignificantNew Use Rules (SNURS)

TSCA 8(d) -Health and Safety Reporting

Sodium Phosphate, Monobasic,Dihydrate

Not Applicable Not Applicable

Canada

WHMIS hazard class:Non-controlled

Canada Controlled Products Regulation:This product has been classified according to the hazard criteria of the CPR (Controlled Products Regulation) and the MSDS containsall of the information required by the CPR.

Inventory

Components Canada (DSL) Canada (NDSL)Sodium Phosphate, Monobasic,Dihydrate

Not Listed Not Listed

Components CEPA Schedule I - Toxic Substances CEPA - 2010 Greenhouse Gases Subject to ManditoryReporting

Sodium Phosphate, Monobasic,Dihydrate

Not listed Not listed

EU Classification

R-phrase(s)not determined

S -phrase(s)none

Components Classification Concentration Limits: Safety PhrasesSodium Phosphate, Monobasic,Dihydrate

No information

The product is classified in accordance with Annex VI to Directive 67/548/EEC

Indication of danger:None.

16. OTHER INFORMATION

Product code: S2010 Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

10 / 11

Page 23: MATERIAL SAFETY DATA SHEET · Notes to Physician: Treat symptomatically 5. FIRE-FIGHTING MEASURES Flammable Properties Flashpoint (°C/°F): No information available. Flash Point

16. OTHER INFORMATION

Revision Date: 1/30/2015Prepared by: Sonia Owen

Disclaimer: All chemicals may pose unknown hazards and should be used with caution. ThisSafety Data Sheet (SDS) applies only to the material as packaged. If this product iscombined with other materials, deteriorates, or becomes contaminated, it may posehazards not mentioned in this SDS. The physical properties reported in this SDS areobtained from the literature and do not constitute product specifications. Informationcontained herein does not constitute a warranty, whether expressed or implied, as tothe safety, merchantability or fitness of the goods for a particular purpose. SpectrumChemicals & Laboratory Products, Inc. assumes no responsibility for results obtainedor for incidental or consequential damages, including lost profits, arising from the useof these data. No warranty against infringement of any patent, copyright or trademarkis made or implied. It shall be the user's responsibility to develop proper methods ofhandling and personal protection based on the actual conditions of use. While thisSDS is based on technical data judged to be reliable, Spectrum assumes noresponsibility for the completeness or accuracy of the information contained herein.

End of Safety Data Sheet

Product code: S2010

Preparation Date: 1/30/2015

Product name: SODIUM PHOSPHATE,MONOBASIC, DIHYDRATE

11 / 11

HMIS Personal Protective EquipmentNFPA