materials sciences and applications, 2014, 5, 245-362materials sciences and applications (msa)...
TRANSCRIPT
Materials Sciences and Applications, 2014, 5, 245-362 Published Online April 2014 in SciRes. http://www.scirp.org/journal/msa
Table of Contents
Volume 5 Number 5 April 2014 Comparative Response of CRL-11372 Cells to Surface Roughness and Crystalline Structure of the Surfaces Developed by Sandblasting, Etching, and TiO2 Coating on Commercially Pure Ti Discs
S. Yeniyol, B. Kepenek, A. Bilir, A. F. Çakır, N. Bölükbaşı, M. Yeniyol, T. Özdemir……..…..………………………………………245
Magnetic Barkhausen Noise Profile Analysis: Effect of Excitation Field Strength and Detection Coil Sensitivity in Case Carburized Steel
M. M. Blaow, B. A. Shaw……….…….………….…….………….…….……….…….……….…….………….…….…….………………………………258
Photoluminescence Spectroscopy as a Tool for Quality Control of GaN Thin Film to be Used in Solar Cell Devices
G. Santana-Rodríguez, A. Mejía-Montero, B. M. Monroy-Peláez, M. López-López, Y. L. Casallas-Moreno, M. Ramírez-López, G. Contreras-Puente, O. de Melo-Pereira…………………………………………………………………………………267
Thermally Induced Nanocrystal Array of Poly(N-Vinylcarbazole) on Si-Wafer Substrate
K. Yamada, Y. Tsuboi………..……………………………………………………………………………………………………………………………………271
Fabrication and Characterization of Phthalocyanine-Based Organic Solar Cells
M. Iwase, A. Suzuki, T. Akiyama, T. Oku………………………………………………………………………………………………………………278
Preparation and Characterization of P-Type Bi0.45Sb1.55Te3 Thin Film Using Pulsed CO2 Laser
R. Muangma, V. Kosalathip, T. Kumpeerapun, P. Limsuwan…………………………………………………………………………………285
Transport Properties of AgInSe2 Crystals
H. T. Shaban, M. K. Gergs………………………………………………………………………………………………………………………………………292
Irradiation Effect on Photodegradation of Pure and Plasticized Poly (4-Methylstyrene) in Solid Films
S. A. Al Safi, T. M. Al Mouamin, W. N. Al Sieadi, K. E. Al Ani……………………………………………………………………………………300
Correlation between Chemical Glass Components and the Glass Sticking on Sputtered PtIr Physical Vapour Deposition Coatings for Precision Blank Moulding
K. Bobzin, N. Bagcivan, T. Brögelmann, T. Münstermann………………………………………………………………………………………316
Bismuth Effect on the Mechanical Properties of Antifriction Al-Sn Alloys
I. Rosales, G. Gonzalez-Rodriguez, J. L. Gama, R. Guardian……………………………………………………………………………………330
Piezoelectric Ceramic Controlled with Platinum Implant as New Isolator in ECG E. Suaste-Gómez, C. O. G. Morán, O. Terán-Jiménez, H. Reyes-Cruz………………………………………………………………………338
Materials Sciences and Applications, 2014, 5, 245-362 Published Online April 2014 in SciRes. http://www.scirp.org/journal/msa
Characterization and Valorization of Two Algerian Bentonites in the Waterproofing Systems M. Debieche, F. Kaoua…………………………………………………………………………………………………………………………………………347
The figure on the front cover is from the article published in Materials Sciences and Applications, 2014, Vol. 5, No. 5, pp. 316-329 by Kirsten Bobzin, Nazlim Bagcivan, Tobias Brögelmann and Tobias Münstermann.
Materials Sciences and Applications (MSA)
Journal Information SUBSCRIPTIONS
The Materials Sciences and Applications (Online at Scientific Research Publishing, www.SciRP.org) is published monthly by Scientific Research Publishing, Inc., USA.
Subscription rates: Print: $89 per issue. To subscribe, please contact Journals Subscriptions Department, E-mail: [email protected]
SERVICES
Advertisements Advertisement Sales Department, E-mail: [email protected]
Reprints (minimum quantity 100 copies) Reprints Co-ordinator, Scientific Research Publishing, Inc., USA. E-mail: [email protected]
COPYRIGHT
COPYRIGHT AND REUSE RIGHTS FOR THE FRONT MATTER OF THE JOURNAL:
Copyright © 2014 by Scientific Research Publishing Inc.
This work is licensed under the Creative Commons Attribution International License (CC BY). http://creativecommons.org/licenses/by/4.0/
COPYRIGHT FOR INDIVIDUAL PAPERS OF THE JOURNAL:
Copyright © 2014 by author(s) and Scientific Research Publishing Inc.
REUSE RIGHTS FOR INDIVIDUAL PAPERS:
Note: At SCIRP authors can choose between CC BY and CC BY-NC. Please consult each paper for its reuse rights.
DISCLAIMER OF LIABILITY
Statements and opinions expressed in the articles and communications are those of the individual contributors and not the statements and opinion of Scientific Research Publishing, Inc. We assume no responsibility or liability for any damage or injury to persons or property arising out of the use of any materials, instructions, methods or ideas contained herein. We expressly disclaim any implied warranties of merchantability or fitness for a particular purpose. If expert assistance is required, the services of a competent professional person should be sought.
PRODUCTION INFORMATION
For manuscripts that have been accepted for publication, please contact: E-mail: [email protected]