mcpc tr-003 mcpc bluetooth hands-free technical ... an incoming video-phone call from the hf.....11...
TRANSCRIPT
MCPC Confidential Copyright © 2003-2004.
1 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
MCPC TR-003
MCPC Bluetooth Hands-Free Technical Reference
for 3G Enhancement
Ver. 1.1 2004.7.1
Mobile Computing Promotion Consortium (MCPC)
MCPC Confidential Copyright © 2003-2004.
2MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
目次
1. はじめに.....................................................................................................................4
1.1. 本ドキュメントについて..................................................................................................4 1.2. 注意............................................................................................................................4
2. 参考規格/仕様 ...........................................................................................................4 3. 第 3 世代携帯電話対応機能 ......................................................................................5
3.1. 第 3 世代携帯電話対応機能概要..................................................................................5 3.2. ユースケース ...............................................................................................................5 3.3. シーケンス規則............................................................................................................6 3.4. 用語............................................................................................................................6
4. Outgoing call .............................................................................................................7 4.1. Placing a video-phone call with the phone number supplied by the HF........................7 4.2. Audio connection transfer towards the HF (During Outgoing call from the AG) ............8 4.3. Placing a video-phone call with the phone number supplied by the HF........................9 4.4. Placing a call with the phone number supplied by the HF and transmitting DTMF code
................................................................................................................................10 5. Incoming call ...........................................................................................................11
5.1. Answer an incoming video-phone call from the HF....................................................11 6. Three way calling....................................................................................................12
6.1. Outgoing call from AG during voice communication by the AG..................................12 6.2. Outgoing call from AG during voice communication by the HF ..................................13 6.3. Outgoing call from AG during voice communication by the HF (Busy, +CHUP) .........14 6.4. Outgoing call from AG during voice communication by the HF (Busy, +CHLD)..........16 6.5. Outgoing call from HF during voice communication by the AG (Busy, +CHUP) .........18 6.6. Outgoing call from HF during voice communication by the AG (Busy, +CHLD) ..........20 6.7. Outgoing call from AG during voice communication by the HF (Canceling, +CHUP)..22 6.8. Outgoing call from AG during voice communication by the HF (Canceling, +CHLD) ..24 6.9. Hold the current call and switch to waiting (audio) call from the AG...........................25 6.10. Terminate a current call and switch to waiting call from the AG (in-band ringing).......26 6.11. Terminate a current call and switch to waiting call from the AG (in-band ringing).......27 6.12. Terminate a current call and switch to held call from the AG (in-band ringing) ...........28 6.13. Terminate a current call and switch to held call from the AG (in-band ringing) ...........30 6.14. Terminate a current call and switch to held call operated by HF(+CHUP)..................31 6.15. Terminate a current call and switch to held call operated by HF(+CHLD) ..................33 6.16. Terminate a current call and switch to held call operated by AG (Private Mode) ........34 6.17. Terminate a current call and switch to held call operated by AG (Handsfree Mode)...36 6.18. Reject a call or terminate a call from the AG .............................................................38 6.19. Terminate held call from cellular network ..................................................................39 6.20. Terminate waiting call from the cellular network ........................................................40
7. Recording Message in AG......................................................................................41 7.1. Start recording message...........................................................................................41 7.2. Audio connection transfer towards the HF during recording message, stopping
recording message and starting voice communication from the HF ...........................42 7.3. Stop recording message and starting voice communication from the HF...................43 7.4. Stop recording message and starting voice communication from the AG...................44 7.5. Terminate recording message from the HF...............................................................45 7.6. Terminate recording message from the AG...............................................................46 7.7. Terminate recording message from the cellular network............................................47
8. AT コマンドの機能追加.............................................................................................48 8.1. ATD コマンド .............................................................................................................48 8.2. AT+CCWA での<class>追加 .....................................................................................48 8.3. AT+CIND での indicators 追加 ..................................................................................48
MCPC Confidential Copyright © 2003-2004.
3MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
9. 参画メンバ................................................................................................................49 10. 改訂履歴..................................................................................................................50
MCPC Confidential Copyright © 2003-2004.
4MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
1. はじめに 1.1. 本ドキュメントについて 本ドキュメントは、MCPC TR-002 (MCPC Bluetooth Hands-Free Technical Reference)に対
して追加シーケンス例を明示する。MCPC TR-002 (MCPC Bluetooth Hands-Free Technical Reference)では、Bluetooth® Special Interest Group (SIG)が規格する Hands Free Profile (HFP)仕様の内容を補足するものであり、HFP を実装する機器間の相互接続性の向上を目的と
する。本ドキュメントは、第 3 世代携帯電話とそれにつながるハンズフリー機器間の機能追加と、
相互接続性の向上を目的とする。 1.2. 注意
本ドキュメントは、その内容を強制するものではなく、Bluetooth®の権利を侵害するものではな
い。またその利用に関しては、利用者の責任において実施されるものとする。MCPC は本ドキュ
メントに関する法的侵害、市場性、またあるいは特定の目的に対する整合性を含むいかなる明示
的、または暗示的保証をしない。 2. 参考規格/仕様 本ドキュメントにて参照している参考規格、関連仕様書を以下に示す。なお、断りが有る場合を除
き、参照するバージョンは最新版とする。
参考文献 [1] Bluetooth SIG, Hands-Free Profile (HFP) v1.0 [2] MCPC, TR-002, MCPC Bluetooth Hands-Free Technical Reference [3] CCAP, Bluetooth Hands-Free Profile Application Guideline, ver. 1.0, June. 20, 2003 [4] Bluetooth SIG, Unrestricted Digital Information Profile (UDI) [5] Bluetooth SIG, Video Conferencing Profile (VCP) [6] 3GPP, TS 27.007 V4.1.0 (2001-03)
MCPC Confidential Copyright © 2003-2004.
5MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
3. 第 3世代携帯電話対応機能 3.1. 第 3世代携帯電話対応機能概要 本章では、第 3 世代携帯電話(AG)とそれにつながるハンズフリー機器(HF)間の機能追加と、
相互接続性の向上を目的とするシーケンスを明示する。機能追加概要を表 1 に示す。 本ドキュメントでの主な明示シーケンスは以下のとおりである。 ・ 第 3 世代携帯電話等で実装される TV 電話機能に対する発着信シーケンスを明示する。ま
た、通常音声呼と TV 電話通話呼の 3 者通話制御などのシーケンスも明示する。 ・ 第 3世代携帯電話等で実装される伝言メモ機能(留守番電話機能)に対する、ハンズフリー
機器からの操作シーケンスを明示する。(伝言メモ機能は、第2世代携帯電話でも実装され
ている場合があります) ・ MCPC, TR-002, MCPC Bluetooth Hands free Guideline[2]では、主に車載環境でのシー
ケンスの明示であるが、本ドキュメントでは、車載環境だけでなく、(HFP[1]による)ヘッドセ
ットアプリケーションへとユースケースを拡大することで利便性を高めるとともに、その際の
相互接続性の向上を目的とするシーケンスを明示する。
表 1: 第 3 世代携帯電話対応機能概要 章 概要 備考 4 発信 ・HF から、TV 電話を指定しての発信
・AG からの発信中の HF への音声パス切替 ・発信中(呼び出し中)の DTMF 信号送信
5 着信 ・車載機(HF)での、TV 電話着信 (音声着信と同様) 6 3 Way Call(3
者通話) ・通話中の TV 電話着信(通知)動作 ・移動機で通話中に移動機での(第 2 呼目)発信動作 ・車載機(HF)で通話中に移動機での(第 2 呼目)発信動作 ・保留呼/通話呼切替シーケンス
7 伝言メモ動作 ・伝言メモ動作 3.2. ユースケース
従来の音声通話のユースケースだけでなく、以下に示すように TV 電話機能を利用した音声通
話へユースケースを拡張する。 【TV 電話への対応】 (1) TV 電話利用時の音声 本ドキュメントでは、HFP[1]を利用して、TV 電話ベアラを使用して、発着信を行うことを明示する。
この時、AG 側は、3G で規定される TV 電話ベアラを利用するが、AG と HF 間は、呼制御および
音声通信のみを想定する。つまり、TV 電話画像は、携帯電話のディスプレイや携帯電話のカメラ
を利用する。ユースケース例を図1に示す。なお、AG と HF で TV 電話ベアラ確立する場合は、
UDI [4], VCP [5]を利用することを想定する。
MCPC Confidential Copyright © 2003-2004.
6MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
3G NW
Video Phone
図 1: TV 電話通話時の HFP での音声利用(ヘッドセットアプリケーション)
(2) 車載システムでの TV 電話利用時の音声 車載システムでの TV 電話利用も本ドキュメントの対象とするユースケースである。ユースケース
の例を図 2 に示す。
図 2: TV 電話通話時の HFP での音声利用(ヘッドセットアプリケーション)
3.3. シーケンス規則
シーケンス規則は、MCPC Bluetooth Hands-Free Technical Reference[2]および CCAP Bluetooth Hands-Free Profile Application Guideline[3]に従う。 3.4. 用語
本ドキュメントの用語は、MCPC Bluetooth Hands-Free Technical Reference[2]および
CCAP Bluetooth Hands-Free Profile Application Guideline[3]に従う。
MCPC Confidential Copyright © 2003-2004.
7MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
4. Outgoing call 4.1. Placing a video-phone call with the phone number supplied by the HF (HF から番号を指定して、TV 電話ベアラでの発信)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
video-phone dialing
ATDddd....
OK
+CIEV:(callsetup=2)
Audio connection set up (HFP)
audio connection established
start the video-phone call establishment procedure using the
phone number ddd
Ring Back Tone
+CIEV:(callsetup=3)
+CIEV:(call=1)
+CIEV:(callsetup=0)
the call established
Call active
video-phone communication
audio connection established
If audio connection is not
present
If AG enables to transfer ring
back tone over audio
connection
MCPC Confidential Copyright © 2003-2004.
8MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
4.2. Audio connection transfer towards the HF (During Outgoing call from the AG) (AG から発信中に HF に通話パス切替)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP) video-phone
dialing
start the call establishment procedure
Ring Back Tone
+CIEV:(callsetup=3)
+CIEV:(call=1)
+CIEV:(callsetup=0)
the call established
Call active
video-phone communication
+CIEV:(callsetup=2)
Audio connection set up (HFP)
transfer the outgoing call to
HF
audio connection established
audio connection established
Ring Back Tone
MCPC Confidential Copyright © 2003-2004.
9MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
4.3. Placing a video-phone call with the phone number supplied by the HF (HF から番号を指定して、TV 電話ベアラでの発信後、音声で再発信)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
video-phone dialing
ATDddd....
OK
+CIEV:(callsetup=2)
Audio connection set up (HFP) audio connection
established
start the video-phone call establishment procedure using the
phone number ddd
Ring Back Tone
+CIEV:(callsetup=3)
+CIEV:(call=1)
+CIEV:(callsetup=0)
the call established
Call active
voice communication
audio connection established
+CIEV:(callsetup=0)
reject due to no capability of video phone communication
start the call establishment procedure using the phone number ddd
+CIEV:(callsetup=2)
If audio connection is not
present
If AG enables to transfer ring
back tone over audio
connection
MCPC Confidential Copyright © 2003-2004.
10 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
4.4. Placing a call with the phone number supplied by the HF and transmitting DTMF code (HF から番号を指定して発信後、呼び出し中の DTMF 信号送出)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
dialing
ATDddd....;
OK
+CIEV:(callsetup=2)
Audio connection set up (HFP)
audio connection established
start the call establishment procedure
Ring Back Tone (guidance)
enter Key(K0) AT+VTS=(K0)
OK send DTMF code of Key(K0)
AT+VTS=(K1)
OK
AT+VTS=(K2)
OK
AT+VTS=(K3)
OK
+CIEV:(callsetup=3)
audio connection established
enter Key(K1)
enter Key(K2)
enter Key(K3)
send DTMF code of Key(K1)
send DTMF code of Key(K2)
send DTMF code of Key(K3)
If audio connection is not present
MCPC Confidential Copyright © 2003-2004.
11 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
5. Incoming call 5.1. Answer an incoming video-phone call from the HF (TV 電話着信に HF で応答) シーケンスは、音声着信と同様である。着信呼の(音声/TV 電話)ベアラ識別として、+CRC[6]を
利用することが可能である。AG, HF とも+CRC への対応はオプションとする。
MCPC Confidential Copyright © 2003-2004.
12 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6. Three way calling 6.1. Outgoing call from AG during voice communication by the AG 通話中に AG から新たな呼を発信(AG で通話中)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
voice communication:X
+CIEV:(callsetup=2)
hold call X and start the call Y establishment procedure
Ring Back Tone
+CIEV:(callsetup=3)
+CIEV:(callsetup=0)
held call:X
+CIEV:(heldcalls=1)
the call established:Y
voice communication:Y
dialing Y
MCPC Confidential Copyright © 2003-2004.
13 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.2. Outgoing call from AG during voice communication by the HF (通話中に AG から新たな呼を発信(HF で通話中))
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
dialing Y
+CIEV:(callsetup=2)
hold call X and start the call Y establishment procedure
Ring Back Tone
+CIEV:(callsetup=3)
+CIEV:(callsetup=0)
voice communication:Y
held call:X
+CIEV:(heldcalls=1)
the call established:Y
MCPC Confidential Copyright © 2003-2004.
14 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.3. Outgoing call from AG during voice communication by the HF (Busy, +CHUP) (通話中に AG から新たな呼を発信(HF で通話中))相手が話中(+CHUP の場合)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
dialing Y
+CIEV:(callsetup=2)
hold call X and start the call Y establishment procedure
Busy Tone
+CIEV:(callsetup=0)
held call:X
+CIEV:(heldcalls=1)
disconnect call Y AT+CHUP(END)
OK
RING ALERT alert the call X
+CLIP:nnn the CLI (nnn)
In-band Ring Tone
notice of held call Y
+CIEV:(call=0)
+CIEV:(callsetup=1)
repetition
Busy
※1
※1
※2
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
15 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
the CLI (nnn)
+CIEV:(callsetup=0)
voice communication:X
RING ALERT alert the call X
+CLIP:nnn
In-band Ring Tone
accept call X ATA
OK
+CIEV:(heldcalls=0)
+CIEV:(call=1) retrieve the call X
※2
※1 機種によっては Busy Tone 送出直前に送出される場合がある。HF 機器側で、Busy Tone送出直前に call=0 等※1 で示されたシーケンスが送出された場合でも、Busy Tone を HF 機器側
で鳴動、AT+CHLD/AT+CHUP が送出できることを推奨する。 ※2 機種によっては送出されない場合がある。
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
16 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.4. Outgoing call from AG during voice communication by the HF (Busy, +CHLD) (通話中に AG から新たな呼を発信(HF で通話中))相手が話中(+CHLD の場合)
switch to call X and disconnect
call Y
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
dialing Y
+CIEV:(callsetup=2)
hold call X and start the call Y establishment procedure
Busy Tone
+CIEV:(callsetup=0)
voice communication:X
held call:X
+CIEV:(heldcalls=1)
AT+CHLD=1
OK
+CIEV:(heldcalls=0)
+CIEV:(call=0)
+CIEV:(call=1) retrieve the call X
Busy
※1
※1
※3
※3
※1 機種によっては Busy Tone 送出直前に送出される場合がある。HF 機器側で、Busy Tone送出直前に call=0 等※1 で示されたシーケンスが送出された場合でも、Busy Tone を HF 機器側
で鳴動、AT+CHLD/AT+CHUP が送出できることを推奨する。 ※3 機種によっては送出される場合がある。
MCPC Confidential Copyright © 2003-2004.
17 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
MCPC Confidential Copyright © 2003-2004.
18 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.5. Outgoing call from HF during voice communication by the AG (Busy, +CHUP) (通話中に HF から新たな呼を発信(AG で通話中))相手先が話中(+CHUP の場合)
the CLI (nnn)
AT+CHUP(END)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X dialing Y
+CIEV:(callsetup=2)
hold call X and start the call Y establishment procedure
Busy Tone
+CIEV:(callsetup=0)
held call:X
+CIEV:(heldcalls=1)
disconnect call Y
OK
RING ALERT alert the call X
+CLIP:nnn
In-band Ring Tone
notice of held call X
ATD........;
OK
Audio connection set up (HFP) audio connection
established audio connection
established
+CIEV:(call=0)
+CIEV:(callsetup=1)
repetition
Busy
※1
※1
※2
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
19 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
the CLI (nnn)
voice communication:X
RING ALERT alert the call X
+CLIP:nnn
In-band Ring Tone
accept call X ATA
OK
+CIEV:(heldcalls=0)
+CIND:(call=1)
+CIND:(callsetup=0)
retrieve the call X
※2
※1 機種によっては Busy Tone 送出直前に送出される場合がある。HF 機器側で、Busy Tone送出直前に call=0 等※1 で示されたシーケンスが送出された場合でも、Busy Tone を HF 機器側
で鳴動、AT+CHLD/AT+CHUP が送出できることを推奨する。 ※2 機種によっては送出されない場合がある。
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
20 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.6. Outgoing call from HF during voice communication by the AG (Busy, +CHLD) (通話中に HF から新たな呼を発信(AG で通話中))相手先が話中(+CHLD の場合)
switch to call X and disconnect
call Y
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X dialing Y
+CIEV:(callsetup=2)
hold call X and start the call Y establishment procedure
Busy Tone
+CIEV:(callsetup=0)
voice communication:X
held call:X
+CIEV:(heldcalls=1)
AT+CHLD=1
OK
+CIEV:(heldcalls=0)
ATD........;
OK
Audio connection set up (HFP) audio connection
established audio connection
established
+CIEV:(call=0)
+CIEV:(call=1) retrieve the call X
Busy
※1
※1
※3
※3
※1 機種によっては Busy Tone 送出直前に送出される場合がある。HF 機器側で、Busy Tone送出直前に call=0 等※1 で示されたシーケンスが送出された場合でも、Busy Tone を HF 機器側
MCPC Confidential Copyright © 2003-2004.
21 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
で鳴動、AT+CHLD/AT+CHUP が送出できることを推奨する。 ※3 機種によっては送出される場合がある。
MCPC Confidential Copyright © 2003-2004.
22 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.7. Outgoing call from AG during voice communication by the HF (Canceling, +CHUP) (通話中に AG から新たな呼を発信(HF で通話中))呼び出し中に HF から中断(+CHUP の場合)
alert the call X
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
dialing Y
+CIEV:(callsetup=2)
hold call X and start the call Y establishment procedure
Ring BackTone
+CIEV:(callsetup=3)
held call:X
+CIEV:(heldcalls=1)
disconnect call Y
AT+CHUP(END)
OK
RING ALERT
+CLIP:nnn the CLI (nnn)
In-band Ring Tone
notice of held call X
+CIEV:(callsetup=0)
+CIEV:(call=0)
+CIEV:(callsetup=1)
repetition
release call : Y ※4
※4
※2
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
23 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
alert the call X
voice communication:X
RING ALERT
+CLIP:nnn the CLI (nnn)
In-band Ring Tone
accept call X
ATA
OK
+CIEV:(heldcalls=0)
+CIEV:(call=1)
+CIEV:(callsetup=0)
retrieve the call X
※2
※2 機種によっては送出されない場合がある。 ※4 機種によっては RING の後に送出される場合がある。この場合※2 で記載されたシーケンス
は送出されない。
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
24 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.8. Outgoing call from AG during voice communication by the HF (Canceling, +CHLD) (通話中に AG から新たな呼を発信(HF で通話中))呼び出し中に HF から中断(+CHLD の場合)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
dialing Y
+CIEV:(callsetup=2)
hold call X and start the call Y establishment procedure
Ring Back Tone
+CIEV:(callsetup=3)
voice communication:X
held call:X
+CIEV:(heldcalls=1)
switch to call X and disconnect
call Y
AT+CHLD=1
OK
+CIEV:(heldcalls=0)
+CIEV:(callsetup=0)
release call Y +CIEV:(call=0)
+CIEV:(call=1) retrieve the call X
※3
※3
※3 機種によっては送出される場合がある。 ※発信呼に対する AT+CHLD=1 による切断は、AG 側の実装によって対応できない場合が
ある。6.7 章記載の AT+CHUP による切断を推奨する。
MCPC Confidential Copyright © 2003-2004.
25 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.9. Hold the current call and switch to waiting (audio) call from the AG (通話中呼を保留して、通話呼切替(AG で操作))
the waiting call Y of CLI nnn
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communicaiton:X
waiting call:Y
+CCWA:nnn,xxx,1
+CIEV:(callsetup=1)
voice communication:Y
held call:X +CIEV:(callsetup=0)
voice communication:X
held call:Y
+CIEV:(heldcalls=1)
+CIEV:(heldcalls=1)
+CIEV:(heldcalls=2)
+CLIP:nnn
hold call X , start the call establishment procedure
and the call established : Y
switch to Y
switch to X
hold call Y, and retrieve the call X
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
26 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.10.Terminate a current call and switch to waiting call from the AG (in-band ringing) (通話中呼を切断して、第 2 呼に応答(AG で操作)) Private Mode、保留呼通知有
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
+CCWA:nnn,xxx,1
the waiting call Y of CLI nnn
+CIEV:(callsetup=1)
disconnect call X
+CIEV:(callsetup=0)
voice communication:Y
release call :X
waiting call:Y
RING ALERT alert the call Y
+CLIP:nnn the CLI (nnn)
In-band Ring Tone
start the call establishment procedure and the call established :Y
Audio connection release
(HFP) audio connection released
audio connection released
notice of waiting call Y
+CIEV:(call=1)
+CLIP:nnn
+CIEV:(call=0)
accept call Y
※4
※4 機種によっては RING の前に送出される場合がある。
If CLI is sent from network
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
27 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.11.Terminate a current call and switch to waiting call from the AG (in-band ringing) (通話中呼を切断して、第 2 呼に応答(AG で操作)) Handsfree Mode、保留呼通知有
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
+CCWA:nnn,xxx,1
the waiting call Y of CLI nnn
+CIEV:(callsetup=1)
disconnect call X
+CIEV:(callsetup=0)
voice communication:Y
release call :X
waiting call:Y
accept call Y
RING ALERT alert the call Y
+CLIP:nnn the CLI (nnn)
In-band Ring Tone
repetition
+CLIP:nnn
RING ALERT
In-band Ring Tone
alert the call Y
the CLI (nnn)
start the call establishment procedure and the call established :Y
notice of waiting call Y
+CIEV:(call=1)
+CIEV:(call=0)
+CLIP:nnn
※4
※4 機種によっては RING の前に送出される場合がある。 ※Private Mode か Handsfree Mode かは、AG 側の実装による。
If CLI is sent from network
If CLI is sent from network
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
28 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.12.Terminate a current call and switch to held call from the AG (in-band ringing) (通話中呼を切断して、NW 保留呼(第 2 呼)に応答(AG で操作))Private Mode、保留呼通知有
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
+CIEV:(heldcalls=0)
voice communication:Y
release call :X
RING ALERT:Y alert the call Y
+CLIP:nnn the CLI (nnn)
In-band Ring Tone
retrieve the call Y
Audio connection release
(HFP) audio connection released
audio connection released
held call:Y
notice of held call Y
+CIEV:(call=0)
+CIEV:(callsetup=1)
+CIEV:(call=1)
+CIEV:(callsetup=0)
disconnect call X
accept call Y
※4
※2
※2
※2 機種によっては送出されない場合がある。 ※4 機種によっては RING の後に送出される場合がある。この場合※2 で記載されたシーケンス
は送出されない。
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
29 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
※Private Mode か Handsfree Mode かは、AG 側の実装による
MCPC Confidential Copyright © 2003-2004.
30 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.13.Terminate a current call and switch to held call from the AG (in-band ringing) (通話中呼を切断して、NW 保留呼(第 2 呼)に応答(AG で操作))Handsfree Mode、保留呼通知
有
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
+CIEV:(heldcalls=0)
voice communication:Y
release call :X
RING ALERT:Y alert the call Y
+CLIP:nnn the CLI (nnn)
In-band Ring Tone
retrieve the call Y
held call:Y
+CIEV:(call=0)
+CIEV:(callsetup=1)
+CIEV:(call=1)
+CIEV:(callsetup=0)
notice of held call Y
disconnect call X
accept call Y
※2
※2
※4
※2 機種によっては送出されない場合がある。 ※4 機種によっては RING の後に送出される場合がある。この場合※2 で記載されたシーケンス
は送出されない。 ※Private Mode か Handsfree Mode かは、AG 側の実装による
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
31 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.14. Terminate a current call and switch to held call operated by HF(+CHUP) 通話中呼を相手が切断後、NW 保留呼に応答(HF で操作)(+CHUP の場合)
AT+CHUP(END)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
+CIEV:(heldcalls=0)
release call :X
RING ALERT:Y alert the call Y
+CLIP:nnn the CLI (nnn)
In-band Ring Tone
held call:Y
notice of held call Y
Busy Tone
disconnect call X
OK
accept call Y ATA
OK
voice communication:Y
+CIEV:(call=0)
+CIEV:(callsetup=1)
+CIEV:(call=1)
+CIEV:(callsetup=0)
retrieve the call Y
※1
※2
※2
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
32 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
※1 機種によっては Busy Tone 送出直前に送出される場合がある。HF 機器側で、Busy Tone送出直前に call=0 等※1 で示されたシーケンスが送出された場合でも、Busy Tone を HF 機器側
で鳴動、AT+CHLD/AT+CHUP が送出できることを推奨する。 ※2 機種によっては送出されない場合がある。 ※(ユーザが通話呼 X の終話および保留呼 Y の存在を認識できるようにするため、)「Release
Call X」後の Busy Tone は、HF 機器から AT+CHUP を受信するまで、または移動機 HMI上で操作するまで、鳴動し続けることを推奨する。なお、移動機実装によっては、Busy Toneがタイマーで切断される場合がある。また、移動機実装によっては、Busy Tone が生成され
ず保留呼 Y が自動的に通話呼になる場合がある。
MCPC Confidential Copyright © 2003-2004.
33 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.15.Terminate a current call and switch to held call operated by HF(+CHLD) 通話中呼を相手が切断後、NW 保留呼に応答(HF で操作)(+CHLD の場合)
switch to call Y and disconnect
call X
AT+CHLD=1
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
+CIEV:(heldcalls=0)
release call :X
held call:Y
Busy Tone
OK
voice communication:Y
+CIEV:(call=0)
+CIEV:(call=1)
retrieve the call Y
※1 ※3
※3
※1 機種によっては Busy Tone 送出直前に送出される場合がある。HF 機器側で、Busy Tone送出直前に call=0 等※1 で示されたシーケンスが送出された場合でも、Busy Tone を HF 機器側
で鳴動、AT+CHLD/AT+CHUP が送出できることを推奨する。 ※3 機種によっては送出される場合がある。 ※(ユーザが通話呼 X の終話および保留呼 Y の存在を認識できるようにするため、)「Release
Call X」後の Busy Tone は、HF 機器から AT+CHUP を受信するまで、または移動機 HMI上で操作するまで、鳴動し続けることを推奨する。なお、移動機実装によっては、Busy Toneがタイマーで切断される場合がある。また、移動機実装によっては、Busy Tone が生成され
ず保留呼 Y が自動的に通話呼になる場合がある。
MCPC Confidential Copyright © 2003-2004.
34 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.16.Terminate a current call and switch to held call operated by AG (Private Mode) 通話中呼を相手が切断。NW 保留呼に応答(AG で操作)Private Mode、保留呼通知有
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
+CIEV:(heldcalls=0)
release call :X
RING ALERT:Y alert the call Y
+CLIP:nnn the CLI (nnn)
In-band Ring Tone
held call:Y
notice of held call Y
Busy Tone
voice communication:Y
Audio connection release
(HFP) audio connection released
audio connection released
retrieve the call Y
+CIEV:(call=0)
+CIEV:(callsetup=1)
+CIEV:(call=1)
+CIEV:(callsetup=0)
disconnect call X
accept call X
※1
※2
※2
※1 機種によっては Busy Tone 送出直前に送出される場合がある。HF 機器側で、Busy Tone送出直前に call=0 等※1 で示されたシーケンスが送出された場合でも、Busy Tone を HF 機器側
で鳴動、AT+CHLD/AT+CHUP が送出できることを推奨する。 ※2 機種によっては送出されない場合がある。
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
35 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
※Private Mode か Handsfree Mode かは、AG 側の実装による
MCPC Confidential Copyright © 2003-2004.
36 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.17.Terminate a current call and switch to held call operated by AG (Handsfree Mode) 通話呼を相手が切断後、NW 保留呼に応答(AG で操作)Handsfree Mode、保留呼通知有
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
+CIEV:(heldcalls=0)
release call :X
RING ALERT:Y alert the call Y
+CLIP:nnn the CLI (nnn)
In-band Ring Tone
held call:Y
notice of held call Y
Busy Tone
voice communication:Y
+CIEV:(call=0)
+CIEV:(callsetup=1)
+CIEV:(call=1)
+CIEV:(callsetup=0)
retrieve call Y
disconnect call X
accept call Y
※1
※2
※2
※1 機種によっては Busy Tone 送出直前に送出される場合がある。HF 機器側で、Busy Tone送出直前に call=0 等※1 で示されたシーケンスが送出された場合でも、Busy Tone を HF 機器側
で鳴動、AT+CHLD/AT+CHUP が送出できることを推奨する。 ※2 機種によっては送出されない場合がある。
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
37 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
Private Mode か Handsfree Mode かは、AG 側の実装による
MCPC Confidential Copyright © 2003-2004.
38 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.18.Reject a call or terminate a call from the AG (通話中に着信呼または保留呼を切断(AG で操作))
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communication:X
voice communication:X
Reject the w aiting call Y
voice communication:X
voice communication:X
release call Y
held call:Y
+CCWA:nnn,xxx,1
+CIEV:(callsetup=1) waiting call:Y
the waiting call Y of CLI nnn
+CIEV:(callsetup=0)
+CIEV:(heldcalls=0)
+CLIP:nnn
Reject the waiting call X
Release the held call Y
In the case that another
call is waiting
In the case that another call is being
held
MCPC Confidential Copyright © 2003-2004.
39 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.19.Terminate held call from cellular network (保留呼を相手が切断)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communicaiton:Y
held call:X
voice communication:Y
+CIEV:(heldcalls=0)
release call X
MCPC Confidential Copyright © 2003-2004.
40 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
6.20.Terminate waiting call from the cellular network (通話中の着信呼を、着信相手が切断)
the waiting call Y of CLI nnn
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
Audio connection (HFP)
voice communicaiton:X
waiting call:Y
+CCWA:nnn,xxx,1
+CIEV:(callsetup=1)
voice communication:X
release call Y +CIEV:(callsetup=0)
+CLIP:nnn
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
41 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
7. Recording Message in AG 7.1. Start recording message (伝言メモ開始(伝言メモ設定によりAG着信後、自動的に開始する場合、または、ユーザが
AG 上で伝言メモを開始した場合))
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
incoming call +CIEV:(callsetup=1)
RING ALERT alert the incoming
call +CLIP:nnn
the CLI (nnn)
In-band Ring Tone
repetition
+CLIP:nnn
start recording message
RING ALERT
Audio connection set up
(HFP)
start the call establishment procedure and the call established
+CIEV:(call =1)
+CIEV:(callsetup=0)
Call active
In-band Ring Tone
Audio connection release
(HFP)
playing answer message and recording message
audio connection released
recording message
audio connection established
audio connection established
alert the incoming call
the CLI (nnn)
audio connection released
+CIEV:(recmsg=1)
If CLI is sent from network
If audio connection is not
present
If CLI is sent from network
MCPC Confidential Copyright © 2003-2004.
42 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
7.2. Audio connection transfer towards the HF during recording message, stopping recording message and starting voice communication from the HF (伝言メモの音声パスを切替、伝言メモを解除(HF で操作))
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
playing answer message and recording message
recording message
playing answer message and recording message
transfer the call to the HF
audio connection established
Audio connection set up (HFP)
OK
ATA
voice communication
stop a recording message and
start voice communication
stop recording message and start voice communication
audio connection established
stop a recording message and
start voice communication
+CIEV:(recmsg=0)
Playing answer message and recording message
MCPC Confidential Copyright © 2003-2004.
43 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
7.3. Stop recording message and starting voice communication from the HF (HF から伝言メモを解除し、HF にて通話を開始)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
recording message
playing answ er message and recording message
OK
ATA
voice communication
audio connection established
audio connection established
Audio connection set up
(HFP)
s tart voice communication
s top a recording message and
start voice communication
s top recording message and start voice communication
+CIEV:(recmsg=0)
MCPC Confidential Copyright © 2003-2004.
44 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
7.4. Stop recording message and starting voice communication from the AG (AG から伝言メモを解除し、AGにて通話を開始)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
recording message
playing answer message and recording message
voice communication
terminate recording message
stop recording message and start voice communication
+CIEV:(recmsg=0)
MCPC Confidential Copyright © 2003-2004.
45 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
7.5. Terminate recording message from the HF (HF から伝言メモを切断)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
recording message
playing answer message and recording message
OK
AT+CHUP
terminate recording message
+CIEV:(call=0)
No call
stop recording message and start call release procedure
+CIEV:(recmsg=0)
MCPC Confidential Copyright © 2003-2004.
46 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
7.6. Terminate recording message from the AG (AG から伝言メモを切断)
HMI HF
Car Equipment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
recording massage
playing answer message and recording message
stop recording message and start call release procedure
+CIEV:(call=0)
No call
terminate recording message
+CIEV:(recmsg=0)
MCPC Confidential Copyright © 2003-2004.
47 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
7.7. Terminate recording message from the cellular network (伝言メモを相手が切断)
HMI HF
Car Equioment (HF)
HMI AG
Cellular Phone (AG) Cellular Network
Service level connection (HFP)
recording message
playing answer message and recording message
release the call
+CIEV:(call=0)
No call
+CIEV:(recmsg=0)
MCPC Confidential Copyright © 2003-2004.
48 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
8. ATコマンドの機能追加 本ドキュメントでは、以下の AT コマンドを拡張する。これらの拡張コマンドの対応は AG、HF とも
すべてオプションである。 8.1. ATDコマンド
ATD コマンドにより、音声ベアラ発信と、TV 電話ベアラ発信を可能とする。ATD コマンドの最後
にセミコロン「;」が付加していた場合は、音声発信になり、それ以外の場合は、TV 電話発信となる。
ただし、TV電話発信に関しては、オプションとする。本機能を有してない AG での「ATDddddd」ま
たは「ATD>nnn」に対する動作(音声発信を行う、ERROR を応答する等)は本ドキュメントでは明
示しない。 セミコロン「;」が付加していない場合は、TV 電話ベアラで発信される。但し、TV 電話ベアラで発
信を行った場合でも、AG 側機能によって、TV 電話ベアラで相手側に接続できない場合は、音声
ベアラへ自動的に再発信することも可能であり、この場合、HF 機器からの ATD コマンド再送は不
要である(4.3 章参照)。本再発信機能の移動機での実装はオプションである。なお、再発信機能
は、AG 側で実装されても、ユーザにより ON/OFF の設定が可能である場合がある。TV 電話ベア
ラの速度設定は、+CBST[6]を利用することが可能であるが、本ドキュメントでは明示しない。 種別 AT コマンド 備考
TV 電話発信 ATDddddd ATD>nnn
セミコロン「;」を付与しない。 d はダイアル(電話)番号である。 n は電話帳メモリ番号である。
音声発信 ATDddddd; ATD>nnn;
d はダイアル(電話)番号である。 n は電話帳メモリ番号である。
8.2. AT+CCWAでの<class>追加
AT コマンド AT+CCWA および非請求リザルト+CCWA に以下の<class>を追加する。 種別 AT コマンド 備考 音声通話中の
TV 電話着信 +CCWA:nnn,xxx, 情報クラス<class>は「Null」 (推奨)
音声通話中の
音声着信 +CCWA:nnn,xxx,1 情報クラス<class>は「1」
着信呼種別情報を利用しない HF 機器の場合は、+CCWA の情報クラスの種別を無視すること
を推奨する。 8.3. AT+CINDでの indicators追加 AT+CIND において、以下の indicators を拡張する。AG、HF ともこれらの追加 indicators の対応
はオプションである。 [heldcalls] NW 保留呼数を通知する。 NW 保留呼なし(<ind>=0)、NW 保留呼が1呼(<ind>=1)、NW 保留呼が2呼(<ind>=2)を示す。 [recmsg] 伝言メモ動作(応答メッセージ再生、伝言メモ録音)の有無を通知する。 伝言メモ動作無し(<ind>=0)、有り(<ind>=1)を示す。
MCPC Confidential Copyright © 2003-2004.
49 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
9. 参画メンバ
参画メンバ (敬称略) 舟戸 裕二 田中 英明 玉津 保治 渋谷 彰 森永 康夫 平塚 浩二 覚野 浩介 中土 昌治 大野 卓一 佐藤 卓哉 安田 光義 加藤 博史 松谷 寛 永濱 健太郎 斎藤 創一 山崎 真一 江島 信昭 高橋 伸久 蔭山 弘 西川 秀一 森本 裕之
アルパイン株式会社 オープンインタフェース株式会社 オープンインタフェース株式会社 株式会社 NTT ドコモ 株式会社 NTT ドコモ 株式会社 NTT ドコモ 株式会社 NTT ドコモ 株式会社 NTT ドコモ キヤノンアイテック株式会社 クラリオン株式会社 ソニー・エリクソン・モバイルコミュニケーションズ株式会社 太陽誘電株式会社 株式会社東芝 株式会社東芝 株式会社デンソー パイオニア株式会社 株式会社 日立製作所 富士通デバイス株式会社 ボーダフォン株式会社 三菱電機株式会社 三菱電機株式会社
MCPC Confidential Copyright © 2003-2004.
50 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
10. 改訂履歴 バージョン 年月日 改訂履歴 1.1.0 2004/7/1 <シーケンス修正に関して>
・補足・追記または、誤記修正⇒変更履歴 ・追加したシーケンス⇒赤 ・修正したシーケンス⇒青
<個別シーケンス> 6.3
・Busy Tone 切断後に+CIEV:(call=0)を追加、呼び返し応答後に +CIEV:(call=1)を追加 ・発信処理中止の+CIEV:(callsetup=0)を Busy Tone の前から Busy Tone 切断後に移動 ・呼び返しの RING の前に+CIEV:(callsetup=1)を追加、呼び返し 応答後に+CIEV:(callsetup=0)を追加 ・注釈追加
6.4 ・Busy Tone 切断後に+CIEV:(call=0)、保留呼切替え後に +CIEV:(call=1)を送出する場合があることを追加 ・発信処理中止の+CIEV:(callsetup=0)を Busy Tone の前から Busy Tone 切断後に移動 ・注釈追加
6.5 ・Busy Tone 切断後に+CIEV:(call=0)を追加、呼び返し応答後に +CIEV:(call=1)を追加 ・発信処理中止の+CIEV:(callsetup=0)を Busy Tone の前から Busy Tone 切断後に移動 ・呼び返しの RING の前に+CIEV:(callsetup=1)を追加、呼び返し 応答後に+CIEV:(callsetup=0)を追加 ・注釈追加
6.6 ・Busy Tone 切断後に+CIEV:(call=0)、保留呼切替え後に +CIEV:(call=1)を送出する場合があることを追加 ・発信処理中止の+CIEV:(callsetup=0)を Busy Tone の前から Busy Tone 切断後に移動 ・注釈追加
6.7 ・呼び出し中断の AT+CHUP の後に+CIEV:(call=0)を追加、呼び返 し応答後に+CIEV:(call=1)を追加 ・呼び返しの RING の前に+CIEV:(callsetup=1)を追加、呼び返し 応答後に+CIEV:(callsetup=0)を追加 ・注釈追加
6.8 ・呼び出し中断後に+CIEV:(call=0)、保留呼切替え後に+CIEV:(call) を送出する場合があることを追加 ・注釈追加
6.10 ・通話呼切断後に+CIEV:(call=0)を追加、呼び返し応答後に
MCPC Confidential Copyright © 2003-2004.
51 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
+CIEV:(call=1)を追加 ・注釈追加
6.11 ・通話呼切断後に+CIEV:(call=0)を追加、呼び返し応答後に +CIEV:(call=1)を追加 ・注釈追加
6.12 ・通話呼切断後に+CIEV:(call=0)を追加、呼び返し応答後に +CIEV:(call=1)を追加 ・呼び返しの RING の前に+CIEV:(callsetup=1)を追加、呼び返し 応答後に+CIEV:(callsetup=0)を追加 ・注釈追加
6.13 ・通話呼切断後に+CIEV:(call=0)を追加、呼び返し応答後に +CIEV:(call=1)を追加 ・呼び返しの RING の前に+CIEV:(callsetup=1)を追加、呼び返し 応答後に+CIEV:(callsetup=0)を追加 ・注釈追加
6.14 ・Busy Tone 切断後に+CIEV:(call=0)を追加、呼び返し応答後に +CIEV:(call=1)を追加 ・呼び返しの RING の前に+CIEV:(callsetup=1)を追加、呼び返し 応答後に+CIEV:(callsetup=0)を追加 ・注釈追加
6.15 ・Busy Tone 切断後に+CIEV:(call=0)、保留呼切替え後に +CIEV:(call=1)を送出する場合があることを追加 ・注釈追加
6.16 ・Busy Tone 切断後に+CIEV:(call=0)を追加、呼び返し応答後に +CIEV:(call=1)を追加 ・呼び返しの RING の前に+CIEV:(callsetup=1)を追加、呼び返し 応答後に+CIEV:(callsetup=0)を追加 ・注釈追加
6.17 ・Busy Tone 切断後に+CIEV:(call=0)を追加、呼び返し応答後に +CIEV:(call=1)を追加 ・呼び返しの RING の前に+CIEV:(callsetup=1)を追加、呼び返し 応答後に+CIEV:(callsetup=0)を追加 ・注釈追加
MCPC Confidential Copyright © 2003-2004.
52 MCPC TR-003 Bluetooth Hands-Free Technical Reference for 3G Enhancement
MCPC TR-003 Ver.1.1 MCPC Bluetooth Hands-Free
Technical Reference for 3G Enhancement
平成16 年 7 月 1 日 (2004. 7. 1)
発行元:モバイルコンピューティング推進コンソーシアム(MCPC) 〒105-0011 東京都港区芝公園3-5-12 芝公園真田ビル
本書の一部または全部を無断で複写(コピー)することは著作権及び 出版者の権利侵害となります。 本書からの転載は原則禁止です。他の書籍等に転載する場合はモバイル コンピューティング推進コンソーシアム(MCPC)の許可を必要と致します。