measurement of the vibrational population distribution of barium sulfide, seeded in an argon...
Post on 21-Dec-2015
215 views
TRANSCRIPT
![Page 1: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/1.jpg)
Measurement of the Vibrational Population Distribution of Barium
Sulfide, Seeded in an Argon Supersonic Expansion, Following Production
Through the Reaction of Laser Ablated Barium with Carbonyl Sulfide
Chris T. Dewberry, Garry S. Grubbs II, Kerry C. Etchison and Stephen A. Cooke, Department of Chemistry, University of
North Texas, Denton, TX, USA
![Page 2: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/2.jpg)
Chirp Pulse Techniques
• The recent advancement in microwave spectroscopy of Chirped Pulse Fourier Transform Microwavea,b,c (CP-FTMW) techniques have greatly broadened search regions shortening acquisition times while also allowing for relative correct intensities of spectra
a. G.G. Brown, B.C. Dian, K.O. Douglass, S.M. Geyer and B.H. Pate, J. Mol. Spec., 238, 200. b. Brown et al, Rev. Sci. Instr., 79, 053103.c. G.S. Grubbs II et al, J. Mol. Spec., 251, 378.
![Page 3: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/3.jpg)
Laser Ablation Techniques
• Advancements in Laser Ablation Techniques, particularly the Walker-Gerry Ablation Nozzlea (Pictured), allow for the introduction of solid, transient, and plasma chemistry to be studied in the gas phase by microwave spectrometers
a. K.A. Walker and M.C.L. Gerry, J. Mol. Spec., 182, 178.
![Page 4: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/4.jpg)
Instruments
• The instruments used in these experiments were a Search Accelerated, Correct Intensity Fourier Transform Microwave (SACI-FTMW)a spectrometer with Laser Ablation Source and a Balle-Flygare type FTMW spectrometer with Laser Ablation Sourceb
SACI-FTMW (upper left)Balle-Flygare Type (above)
a. G.S. Grubbs II, C.T. Dewberry, K.C. Etchison, K. Kerr, and S.A. Cooke, Rev. Sci. Instr., 78, 096106.b. K.C. Etchison, C.T. Dewberry, and S.A. Cooke, Chem. Phys., 342, 71.
![Page 5: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/5.jpg)
SACI-FTMW with Laser Ablation
• Pictured above is a sampling of spectra from SACI-FTMW with Laser Ablation Sourcea
• The relative intensities of the spectra demonstrate good agreement with isotopic abundance
a. G.S. Grubbs II, C.T. Dewberry, K.C. Etchison, K. Kerr, and S.A. Cooke, Rev. Sci. Instr., 78, 096106.
![Page 6: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/6.jpg)
Barium Sulfide
• Given these advancements, new questions can be asked about the chemistry of the molecule in the laser ablation event
• These questions are more easily approached using simple diatomic species
• Barium Sulfide, a previously studieda closed shell molecule, seemed a good candidate for these experiments due to its large dipole moment
a. D. A. Helms, M. Winnewisser, and G. Winnewisser, J. Phys. Chem., 84 (1980), 1758
![Page 7: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/7.jpg)
Barium and Sulphur Isotopes
Isotopes Natural Abundance (%)
Nuclear Spin, I
130Ba 0.106 0132Ba 0.101 0134Ba 2.417 0135Ba 6.592 3/2
136Ba 7.854 0137Ba 11.232 3/2138Ba 71.698 0
Isotopes Natural Abundance (%)
Nuclear Spin, I
32S 94.93 0
33S 0.76 3/2
34S 4.29 0
36S 0.02 0
![Page 8: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/8.jpg)
Barium Sulfide• J = 2 – 1, ν = 0 transition of 138Ba32S to 136Ba32S
was 8.94 : 1 and the natural isotopic ratio is 9.12 : 1
• QUESTION: Is there a parameter we can manipulate to alter the vibrational state distribution intensities or is everything dominated by the supersonic expansion?
![Page 9: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/9.jpg)
Parameters Studied
• Laser Power• Backing Gas Pressure• OCS Concentration • OCS in Argon and Helium• H2S in Argon and Helium
Variables held constant while not being studied: 75% LaserPower, .3% OCS Concentration, Argon backing gas, 4.5 atm backing pressure
![Page 10: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/10.jpg)
Notes• BaS was seen to be present simply by a test of
the Laser being on vs. off• RELATIVE intensities have been used in the
experiments by as ratios of one transition to another
• Any other transitions have been measured with the Balle-Flygare type FTMW spectrometer
• Experiments were performed on the 3 lowest vibrational states of the main isotopologue
![Page 11: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/11.jpg)
Experimental Control• 20 gas units of OCS in Argon at 7000 gas units
(~4.5 atm) with a Laser Power of 75% maximum power (1560 gas units = 1 atm)
• Chirp pulse lengths are 3 μs with a span of 2 GHz being examined at a time
• Timings are generally the same throughout the experiment
![Page 12: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/12.jpg)
BaS Spectra
• A sample BaS spectra taken from the SACI-FTMW spectrometer (96508 Averaging Cycles)
![Page 13: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/13.jpg)
Control Scan Zoom In 12100-12450 MHz
![Page 14: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/14.jpg)
Control
BaS Run Band Ratio Intensity Ratio Value
96508 Shots ν=1/ν=0 2.57/15.9 0.162
J = 2-1 ν=2/ν=0 1.81/15.9 0.114
ν=3/ν=0 1.32/15.9 0.083
ν=4/ν=0 1.01/15.9 0.064
ν=5/ν=0 0.73/15.9 0.046
ν=6/ν=0 0.56/15.9 0.035
![Page 15: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/15.jpg)
Laser Power ResultsLaser Power Band Ratio Intensity Ratio Value Control
65% ν=1/ν=0 2.434/16.782 0.145 0.162
ν=2/ν=0 1.857/16.782 0.111 0.114
75% ν=1/ν=0 6.851/32.666 0.210 0.162
ν=2/ν=0 5.564/32.666 0.170 0.114
80% ν=1/ν=0 3.504/17.022 0.206 0.162
ν=2/ν=0 2.864/17.022 0.168 0.114
85% ν=1/ν=0 1.841/7.033 0.262 0.162
ν=2/ν=0 1.456/7.033 0.207 0.114
90% ν=1/ν=0 0.648/2.351 0.276 0.162
ν=2/ν=0 0.576/2.351 0.245 0.114
![Page 16: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/16.jpg)
Laser Power Conclusion
• A trend of the ν =1/ν=0 and ν =2/ν=0 ratios show an increase toward the populations of higher vibrational states as laser power increases
• Tradeoff of intensity of the spectra with alteration of the distribution
![Page 17: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/17.jpg)
Backing Gas Pressure (with OCS)Results
Pressure (Arb. Units)
Band Ratio Intensity Ratio Value Control
6718 ν=1/ν=0 4.330/21.721 0.199 0.162
ν=2/ν=0 3.583/21.721 0.165 0.114
5720 ν=1/ν=0 4.157/20.620 0.202 0.162
ν=2/ν=0 3.235/20.620 0.157 0.114
4704 ν=1/ν=0 2.375/11.642 0.204 0.162
ν=2/ν=0 1.921/11.642 0.165 0.114
3709 ν=1/ν=0 0.861/4.60 0.187 0.162
ν=2/ν=0 0.530/4.60 0.115 0.114
2692 ν=1/ν=0 0.702/3.36 0.209 0.162
ν=2/ν=0 0.5401/3.36 0.161 0.114
1707 ν=1/ν=0 0.738/4.01 0.184 0.162
ν=2/ν=0 0.611/4.01 0.152 0.114
![Page 18: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/18.jpg)
Backing Gas Pressure (with OCS)Conclusion
• Non-conclusive results due to inconsistent trends in the data
• Higher backing pressures intensify the bands (as expected with the chemistry in the jet)
![Page 19: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/19.jpg)
Concentration of OCS Results
Concentration Band Ratio Intensity Ratio Value Control
.3% ν=1/ν=0 0.729/4.58 0.164 0.162
ν=2/ν=0 0.560/4.58 0.122 0.114
.6% ν=1/ν=0 0.979/6.16 0.159 0.162
ν=2/ν=0 0.739/6.16 0.120 0.114
.9% ν=1/ν=0 No Signal N/A 0.162
ν=2/ν=0 No Signal N/A 0.114
![Page 20: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/20.jpg)
Concentration of OCS Conclusion
• No observed concentration dependence for the vibrational state distribution
• There is a point at which the mixture becomes too rich causing BaS signal elimination
![Page 21: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/21.jpg)
OCS in Argon and Helium Result
Backing Gas Band Ratio Intensity Ratio Value Control
Argon ν=1/ν=0 3.085/14.518 0.212 0.162
ν=2/ν=0 2.131/14.518 0.147 0.114
Helium ν=1/ν=0 0.935/6.267 0.149 0.162
ν=2/ν=0 0.742/6.267 0.118 0.114
![Page 22: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/22.jpg)
OCS in Argon and Helium Conclusion
• As expected, the Helium lowered the intensity of the ν = 0 transition due to a warmer rotational temperature
• No real change to the vibrational state populations due to Argon or Helium with OCS
![Page 23: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/23.jpg)
Barium Sulfide Synthesis
Ba + OCS BaS + CO Winnewisser*Done in an Oven
*D. A. Helms, M. Winnewisser, and G. Winnewisser, J. Phys. Chem., 84, 1758.
Ba + OCS BaS + ___ Laser Ablation
Ba + Scontaining gas BaS + ___ Parameter
![Page 24: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/24.jpg)
H2S Gas Mixture ResultsBacking Gas Band Ratio Intensity Ratio Value Control
Argon ν=1/ν=0 0.788/3.805 0.207 0.162
ν=2/ν=0 0.397/3.805 0.104 0.114
Helium ν=1/ν=0 No Signal/.771 N/A 0.162
ν=2/ν=0 No Signal/.771 N/A 0.114
Backing Gas Band Ratio Intensity Ratio Value Control
Argon ν=1/ν=0 3.085/14.518 0.212 0.162
ν=2/ν=0 2.131/14.518 0.147 0.114
Helium ν=1/ν=0 0.935/6.267 0.149 0.162
ν=2/ν=0 0.742/6.267 0.118 0.114
OCS Gas Mixture Results
![Page 25: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/25.jpg)
H2S Gas Mixture Conclusion
• There is a change of the population distribution not seen in the previous experiments (ν=1/ν=0 ratio goes up while the ν=2/ν=0 ratio relatively remains the same)
• H2S mixed with Helium is not strong enough to be detected currently
![Page 26: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/26.jpg)
Vibrational State Testing
• Laser power had a trend of increasing the ratios of ν=1/ν=0 and ν=2/ν=0, but with a signal intensity tradeoff
• Backing pressures were non-conclusive• Mixtures of OCS in Argon and Helium only provided
knowledge currently understood by the supersonic expansion
• H2S mixtures in Argon yielded an increase in one vibrational state ratio, ν=1/ν=0, while leaving the ν=2/ν=0 ratio relatively unchanged while signal issues prevented the Helium mixed analog to be studied further
![Page 27: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/27.jpg)
Measured TransitionsIsotopomer ν J’ - J’’
Frequency (MHz)
138Ba 32S 0 1 - 0 6185.108 2 - 1 12370.194 3 - 2 18555.236 4 - 3 24740.207 1 1 - 0 6166.163 2 - 1 12332.301 3 - 2 18498.397 2 2 - 1 12294.305 3 - 2 18441.404 3 2 - 1 12256.203 3 - 2 18384.248 4 2 - 1 12217.991 3 - 2 18384.248 5 2 - 1 12179.666 6 2 - 1 12141.227 7 2 - 1 12102.669
137Ba 32S 0 2 - 1 12388.006 12384.321 12387.169
3-2 18581.17018578.77618575.922
Isotopomer ν J’ - J’’Frequency
(MHz)136Ba 32S 0 1 - 0 6202.231
2 - 1 12404.438 3 - 2 18606.602 1 2 - 1 12366.387 3 - 2 18549.526 2 2 - 1 12328.235 3 2 - 1 12289.972
135Ba 32S 0 2 - 1 12422.457 12416.185 12426.926 3 - 2 18633.120 18631.563 1 2 - 1 12377.540 12378.359
134Ba 32S 0 2 - 1 12439.697 3 - 2 18659.488 1 2 - 1 12401.487
138Ba 34S 0 2 - 1 11780.667 3 - 2 17670.952 1 2 - 1 11745.456
This listing is all measured transitions to date including transitions only observed by the cavity experiment. High resolution of the transitions are due to the cavity experiment.
![Page 28: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/28.jpg)
Rotational Constants
• Hyperfine structure observed for 135Ba and 137Ba species
Constants Frequency (MHz)
Y01 3097.28318(674)
Y02 -0.000918966(198)
Y03 0.000000000033(32)
Y11 -9.448321(323)
Y21 -0.012240(113)
Y31 -0.0001314(105)
Y12 -0.000001017(234)
Y22 -0.0000001956(873)
Δ01 -3.257(559)
Δ01 -5.1045(780)
Ba
S
Our Work for 138Ba32S Constants Frequency (MHz)
Y01 3097.28216(26)
Y02 -0.000918568(63)
Y03 NOT REPORTED
Y11 -9.44620(33)
Y21 -0.013323(66)
Y31 NOT REPORTED
Y12 -0.000001554(73)
Y22 NOT REPORTED
Δ01 NOT REPORTED
Δ01 NOT REPORTEDS
G. Winnewissera for 138Ba32S
a. D. A. Helms, M. Winnewisser, and G. Winnewisser, J. Phys. Chem., 84, 1758
Ba
![Page 29: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/29.jpg)
Overall Conclusions
• Laser Power and H2S gas mixtures shifted the distribution of the vibrational band ratio for populations suggesting different chemistry is happening in the ablation process for the molecule
• Many vibrational state transitions have been studied for isotopologues of the BaS molecule and rotational constants as well as Born-Oppenheimer Breakdown terms have been determined and reported
![Page 30: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/30.jpg)
Acknowledgements
• Funding from NSF• The Cooke Group
![Page 31: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/31.jpg)
Future Work
• Nozzle Design
• Other Backing Gases (Ne, He/Ne, Xe, etc.)
• Other Gases containing Sulphur (CS2)
![Page 32: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/32.jpg)
Balle-Flygare Spectrometer Techniques
• Balle-Flygare Fourier Transform Microwave1 (FTMW) spectrometer advancements of coaxial orientation of the sample nozzle2 allows for increased resolution of measured spectra ( ~7 kHz linewidths).
![Page 33: Measurement of the Vibrational Population Distribution of Barium Sulfide, Seeded in an Argon Supersonic Expansion, Following Production Through the Reaction](https://reader035.vdocuments.net/reader035/viewer/2022062714/56649d5d5503460f94a3cbc6/html5/thumbnails/33.jpg)
Overview
• Techniques in Microwave Spectroscopy• Dynamics of the Ablation Process Experiments• Measured Transitions• Rotational Constants• Overall Conclusions