mec5017
TRANSCRIPT
-
8/10/2019 MEC5017
1/2
MEC5017MODERN TECHNIQUES OF MATERIALS
CHARACTERIZATION
L T P C
3 0 0 3
CHARACTERIZATION
Materials characterization - definition; importance and application with case studies, Ultrahigh vacuum, surface science
DIFFRACTION METHODS
Principles and general methods of compositional, structural and defect characterization,
techniques of X-ray, electron and neutron diffraction, EDAX,
THERMAL ANALYSIS
Thermal methods - DTA, TGA, DSC, TMA and DMA.
MICROSCOPIC ANALYSIS
Microscopy - optical, Electron microscopy Transmission Electron Microscope (TEM),
Scanning Electron Microscope (SEM), basic principle and instrumentation configuration -
Atomic force microscope (AFM) including contact-mode, tapping-mode and lateral-force
AFM, scanning tunneling microscope (STM), electron microprobe analysis.
SPECTROSCOPIC ANALYSIS
Optical spectroscopy - UV, visible, IR and Raman spectroscopy, ESCA and Auger
spectroscopy - Fourier-transform infrared spectroscopy (FTIR) and Raman spectroscopy,
including basic principle, instrumentation configuration, data interpretation and analysis.
TEXTBOOKS
1.
"Surface Analysis - The Principal Techniques", by John C. Vickerman, John Wiley
&Sons; 1st edition, (1997), ISBN: 0471972924
2.
"Organic Structural Spectroscopy" by Joseph B. Lambert, Herbert F. Shurvell, DavidA Lightner, Robert Graham Cooks, Prentice Hall; 1st edition, (1997), ISBN:
0132586908
REFERENCES:
1.
Online AFM textbook, Fundamentals of the scanning probe microscopy by V.
L.Mironov
2.
Surface Analysis Methods in Materials Science by D.J. O'Connor, Brett A. Sexton,
3.
Roger S. C. Smart, Springer; 2 edition, (2003), ISBN: 3540413308
4.
Organic Spectroscopy, by Lal Dhar Singh Yadav, Springer; 1 edition, (2005),
ISBN:14020257425.
Surface and Thin Film Analysis: A Compendium of Principles, Instrumentation, and
Applications" by Henning Bubert , Holger Jenett, Wiley-VCH, (2002), ISBN:
3527304584
6.
Scanning Probe Microscopy: The Lab on a Tip by Ernst Meyer, Hans J. Hug, Roland
Bennewitz, Springer, (2003), ISBN: 3540431802.
7.
Handbook of Surface and Interface Analysis, by John C. Riviere, CRC; 1 edition,
(1998), ISBN: 0824700805
8.
Structure Determination of Organic Compounds : Tables of Spectral Data",by E.
Pretsch, P. Bhlmann, C. Affolter, Springer; 3 edition, (2004), ISBN: 3540678158
9.
Practical Guide to Surface Science and Spectroscopy by Yip-Wah Chung, Academic
Press, (2001), ISBN: 0121746100.
-
8/10/2019 MEC5017
2/2
MEC5021 COMPOSITE MATERIALS TECHNOLOGYL T P C
3 0 0 3
[Common for M.Tech (CAD/CAM) and M.Tech (Energy Engineering)]
INTRODUCTIONLimitations of conventional materials - definition of composite materials - types and
characteristics - applications.
MATERIALS
Fibbers - Materials - Fibber reinforced plastics - thermoset polymers - Coupling agents, fillers
and additives - Metal Matrix and Ceramic composites.
MANUFACTURING
Fundamentals - bag moulding - compression moulding pultrusion-filament winding - other
manufacturing process - quality inspection and non-destructive testing.
MECHANICS AND PERFORMANCE
Introduction to micro-mechanics-unidirectional lamina - laminates - interlaminar stresses -
static mechanical properties - fatigue properties - impact properties - environmental effects -
fracture mechanics and toughening mechanisms, damage prediction, failure modes.
DESIGN
Failure predictions - design considerations - joint design - codes - design examples.
Optimization of laminated Composites - Application of FEM for design and analysis oflaminated composites.
Text Books:
1. Ronald Gibson, "Principles of Composite Material Mechanics ", Tata McGraw Hill, 1994.
2. Micael hyer, "Stress Analysis of Fiber - Reinforced Composite Materials ", Tata
McGrawHill, 1998.
References:
1. P.K.Mallicak, "Fiber-reinforced composites ", Monal Deklar Inc., New York, 1988.2. B.D. Agarwal and L.J.Broutman, "Analysis and Performance of Fiber Composites ", John
Wiley and Sons, New York, 1980.
3. F.L.Matthews & R.D.Rawlings, "Composite Materials, Engineering and Sciences ",
Chapman & hall, London, 1994.