Upload File

mechanical setting tool set run instructions

3
MechanicalSettingToolandRetainer Assembly,AllSizes 1. SlideDragPadAssemblyupuntilstoppedbyControlNut. 2. RotateDragPadAssemblyrightagainstStop. 3. SlideUpperSlipsoverStingerSubBody.LoosenclampenoughtoinstallSlip SegmentsovertheridgeontheControlLatch. 4. AligntheSlipSegmentsovertheridgeontheControlLatch,thentightenclampfully. 5. Lubricatenon-wickeredportionofSlipswithJT-6HighTempGrease. 6. ChecktoseethattheDragPadunitisstillbackagainsttheStop. 7. ChecktoseethattheDragPadUnitisstillupagainsttheControlNut. RotateSettingSleevedownoverSlipuntilsleevebottomsout.Backoff1/2turn. 8. TightenSetScrews.LubricateStingerSealandthreadsonControlLatch,then SlideRetainerover Stinger. 9. DriveRetaineroverStingerSealuntiltheRetainerbottomsoutontheControlLatch. 10. RotateRetainertomake -upontoControlLatch.(LeftHandThread). 11. InstallRotationalLockScrew(s)inhole(s)inControlLatchandsecure. RunningInAndSettingMechanically Duringrunningin,caremustbeexercisedtopreventright-handrotationfrombeingtransmittedtotheRetainer. NOTE: Asaprecaution,oneleft-handrotationshouldbemadeeveryfivetotenstands. 1.Afterreachingsettingdepth,pickuptwofeettoprovideslackwhichwillallowthecontrolnuttorotatefreely. 2.Rotatetenturnstotheright(atthetool)tothreadthecontrolnutupwardandfreethecontrolsleeve. 3.Lowerthetoolbacktosettingdepth.Thisaction,combinedwiththerestrainingforceofthedragpads,pulls thesettingsleevefromovertheupperslipassembly.Theradialsprings,attachedinsidetheupperslip segmentforcetheslipsoutagainstthecasing.Atthesametimetheretainingsleeveispulledoffofthedog, un-lockingthestingersubbodyfromthecontrollatch. MechanicalSettingTool RunningInstructions Thisdocumentisuncontrolledwhenprinted. ©2015EvolutionOilToolsInc.Allrightsreserved. www.eotools.comTollFree:1-800-265-TOOL CompletionTools

Upload: evolution-oil-tools

Post on 10-Nov-2015

5 views

Category:

Documents


1 download

Report

DESCRIPTION

The Evolution WCT Mechanical Setting Tool is a dependable tool for setting cement retainers and cast iron bridge plugs. They are now available in drag block or bow spring styles. With a built-in snap latch and stinger seal, these tools will latch into a retainer with set-down weight and release with upstrain or right-hand turn.

TRANSCRIPT

  • MechanicalSettingToolandRetainerAssembly,AllSizes

    1.

    SlideDragPadAssemblyupuntilstoppedbyControlNut.

    2.

    RotateDragPadAssemblyrightagainstStop.

    3.

    SlideUpperSlipsoverStingerSubBody.LoosenclampenoughtoinstallSlipSegmentsovertheridge ontheControlLatch.

    4.

    AligntheSlipSegmentsovertheridgeontheControlLatch,thentightenclampfully.

    5.

    Lubricatenon-wickeredportionofSlipswithJT-6HighTempGrease.

    6.

    ChecktoseethattheDragPadunitisstillbackagainsttheStop.

    7.

    ChecktoseethattheDragPadUnitisstillupagainsttheControlNut.

    RotateSettingSleevedownoverSlipuntilsleevebottomsout.Backo1/2turn.

    8. TightenSetScrews.LubricateStingerSealandthreadsonControlLatch,thenSlideRetainerover Stinger.

    9. DriveRetaineroverStingerSealuntiltheRetainerbottomsoutontheControlLatch.

    10. RotateRetainertomake -upontoControlLatch.(LeftHandThread).

    11. InstallRotationalLockScrew(s)inhole(s)inControlLatchandsecure. RunningInAndSettingMechanically

    Duringrunningin,caremustbeexercisedtopreventright-handrotationfrombeingtransmittedtotheRetainer.

    NOTE: Asaprecaution,oneleft-handrotationshouldbemadeeveryvetotenstands.

    1.Afterreachingsettingdepth,pickuptwofeettoprovideslackwhichwillallowthecontrolnuttorotatefreely.

    2.Rotatetenturnstotheright(atthetool)tothreadthecontrolnutupwardandfreethecontrolsleeve.

    3.Lowerthetoolbacktosettingdepth.Thisaction,combinedwiththerestrainingforceofthedragpads,pullsthesettingsleevefromovertheupperslipassembly.Theradialsprings,attachedinsidetheupperslipsegmentforcetheslipsoutagainstthecasing.Atthesametimetheretainingsleeveispulledoofthedog,un-lockingthestingersubbodyfromthecontrollatch.

    MechanicalSettingToolRunningInstructions

    Thisdocumentisuncontrolledwhenprinted. 2015EvolutionOilToolsInc.Allrightsreserved.www.eotools.comTollFree:1-800-265-TOOL CompletionTools

  • 4.TocompletethesettingoftheRetainerorBridgePlugpullatleasttheminimumtensionshowninthechartbelow.Slackoanequivalentamountonthetoolandreapplytensionholdingforatleastaminute.Thetubingmaybetestedatthispointbypullingaslighttensiontoclosethesleevevalve.Theremaybetimeswhenjunkintheholemaypreventthefullreleaseofthedogfromthestingersubbodyandtherebypreventactuationofthevalve.Shouldthisoccur,asindicatedbytestingthetubing,alternatelypickupandslackothetubing.Thisactionwillcamthedogoutofthegrooveinthestingersubbodyandallowfullcontrolmovement.Thesleevevalveis operatedwith2"ofmovementattheretainer,uptocloseanddowntoopen.

    5.ToreleasethesettingtoolfromtheRetainer,pickuptoclosethevalve.Holdingaslighttension,apply300to400ft-lb(Size45 -47OneShearScrew)or600 -800ft-lb(Size 49upTwoShearScrews)ofrighthandtorquetothetubingordrillpipe.Thiswillsheartherotationallockscrewsandallowthecontrollatch,withtenadditionalrighthandturns(atthetool),tobeunscrewedfromtheRetainer.6.Afterreleasingf romtheRetainerrotationally,aset-downweightof3,000to5,000lbswillre-latchthesettingtoolandan8,000to10,000lbs.tensionwillunlatch.ThestingerwillremainsealedinCementRetainerSealBoreaslongasthesnap -outforceisnotexceeded.

    NOTE: TheCementRetainerBodyismadeofareadilydrillablematerial.EachtimethesettingtoolissnappedoutoftheRetainer,thesnap -inandsnap-outvalueswilldecreaseslightlyuntiltheyreachapproximately2,500lbs(snap -in)and5,000lbst o6,000lbs(snap -out).ThispatternwilloccurwitheachRetainerrun.Controlofthevalveismaintainedbysettingdowntoopenandbypickinguptoclose.ThecontroldistanceintheRetaineris2".

    Tension Required

    With 90 Hard Elements

    Tool Size Minimum Tension (lbs) MaximumTension (lbs)

    43-44 20,000 30,000

    45 30,000 40,000

    46 up 40,000 50,000

    Tension Required

    With 80 Hard Elements

    Size Tool Minimum Tension (lbs) Maximum Tension (lbs)

    43-47 20,000 30,000

    49-up 30,000 45,000

    Shoulditbe advantageoustohavealowertorquerequirementtoreleasethesettingtoolfromtheRetainer,thebrassshearscrewinthefollowingtablemaybesubstitutedforthestandardannealedsteeltyperotationallockscrews.Thebrassscrewsrequireapproximat ely200ft/lbsoftorquetoshearperscrew.

    Tool Size 43 45 46-47 48 49 51

    Brass Screw 5/16-18 x 1/2 5/16-18 x 5/8 5/16-18 x 3/4 5/16-18 x 1 5/16-18 x 3/4 5/16-18 x 1-1/4

    MechanicalSettingTool

    www.eotools.com

  • MechanicalSettingTool

    www.eotools.com

    CANADA#3,182030thAveNE

    Calgary,AlbertaT2E7M5

    TollFree:1-800-265-TOOL(8665)

    Main:403-243-1442

    Fax:403-258-2614

    6415A-63St.Close

    Lloydminster,AlbertaT9V3B5

    Tel:780-522-8294

    Fax:780-875-6337

    451281Ave

    Edmonton,Alberta

    Tel:587-758-9091

    Cell:780-919-1722

    Cell:780-893-1019

    UNITEDSTATESOFAMERICAP.O.Box5363

    2908CoffeyStreet

    Victoria,Texas77903

    Main:361-575-7900

    Fax:361-575-8081

    2400KermitHwy

    Odessa,Texas79764

    Cell:432-638-7902

    Page 1Page 2Page 3


COLVIN RUN MILL - ASME€¦ · Automation required many mechanical motions and some entirely novel devices invented by Evans, including a mechanical hopper boy, a raking device used

HOW TO ORGANIZE AND RUN EFFECTIVE MEETINGSHOW TO RUN EFFECTIVE MEETINGS The meeting leader or facilitator is responsible for setting the meeting tone, keeping the discussion on track,

HYUNDAI - WorldWide Electric | Electric Motor, Gears, VF ... · PDF fileHYUNDAI N700E series inverter with high durability, ... SET (2nd Motor Constants Setting) RUN (Run Signal),

GOVT. ENGINEERING COLLEGE DUMKA (RUN / MANAGED BY …dumkaengg.edu.in/uploads/syllabus/165_Syllabus for B.Tech(Mechanical... · GOVT. ENGINEERING COLLEGE DUMKA (RUN / MANAGED BY TECHNO

Statistics & Probability in Mechanical Design...Mechanical Development Process Development Flow (simplified) part / process design Concept Tolerance Analysis Good? yes no trial run

SETTING MECHANICAL SEALS - Carraracarrara.it/.../themes/carrara/assets/download/tenute_meccaniche_en.pdfmechanical seals SETTING MECHANICAL SEALS FERP ... Rotating face Tungsten Carbide,

Petrochemical Industry - Scharlab Magyarországscharlabmagyarorszag.hu/katalogus/scharlau_termekek_petrolkemiai... · Petroleum provides the mechanical power to run machines and industries

Bar joist over kitchen and band room. Setting bar joist over kitchen and electrical/mechanical rooms

EnviroSeal SpiralTrac™ bushings€¦ · Run Lean, Run Clean Chesterton mechanical seals provide superior performance and reliability in all types of rotating equipment EnviroSeal

Euclid Escarpment Run Natural Setting

Effect of Variation in Different Mechanical Setting of Draft Change … · How to cite this article: Anowar H, Samanta AK . Effect of Variation in Different Mechanical Setting of

Berkeley dry-run Seal · Dry-run Gland Mechanical Seal Tubing The dry-run Gland incorporates two (2) 1/4" nPT tangential inlet (bottom) and outlet (top) ports. The rotating shaft

Frontier Permanent Casing Packerfrontieroiltools.com/wp-content/uploads/2020/05/Frontier...Traditional Set Second Run Packers when Run-In on Tubing •Setting Tool Designed with Anti-Preset

DRY RUN CREEK WATERSHED SETTING GOALS FOR SUCCESS · 2020. 3. 20. · Dry Run Creek Impaired Segments Dry Run Creek 15,177 ACRES 30 MILES OF STREAM POPULATION: 41,255 Increased 13%

LIST OF CONTENTS - AeroDesignWorks · 2019. 8. 30. · EXPLANATION: Mechanical problem of engine FLAMEOUT DURING RUN REASON: Temperature felt short of 200 degree during run. EXPLANATION:

ELECTRONIC FUZES’ ’ REMOTE SETTING SYSTEM … setting system for chambered tank ammunitions ... electronic time fuze’s characteristics ... (electronic and mechanical) (9)

Full Support Ý Limited Capability Û Requires more than 1 ... · ENTERPRISE MECHANICAL PREMIUM MECHANICAL PRO AUTODYN LS-DYNA AIM MISCELLANEOUS AND USABILITY (CONTINUED) Batch run

ALBANY FITWALKERS NEWSLETTER · Albany Parks and Rec. I am involved in setting up a run that will take place Sunday August 28 th at Timber Linn park. There is a 10k run, a 5K run/walk

Method Manual Mechanical Pump Test Run

Near-Rational Wage and Price Setting and the Long-Run

Incorporating Marginal Costs in Water Supply Tariffs ... Water... · need for long run marginal costs in setting prices, ... Short Run Marginal Cost ... regulators and companies in

PEAD-A09,12,15,18,24,30,36,42AA7 · Cursor Main menu: Test run Input maintenance info. Function setting Check Self check Test run menu Cursor Service menu: Test run Drain pump test

“Mechanical CPR Compression Device” TSC RFP 21-13...This mechanical cpr compression device will be used in the classroom setting through hands on ... 2.1.8 All statements, information

SETTING MECHANICAL SEALS › wp-content › themes › carrara › ... · mechanical seals SETTING MECHANICAL SEALS FERP CARRARA SpA via Provinciale, 1/E - 25030 ADRO (Bs) Italy -

Surfacing techniques - kai.rumaterial.kai.ru/files/2016/04/Surfacing-techniques.pdf · 2017. 5. 5. · (GOST 16429-70) Molecular mechanical (Wear upon setting 1 and 2 kinds) Mechanical

Mechanical Periotome. Reciprocating tip in a vertical direction Setting a new standard for trauma free extractions, The new Luxator LX mechanical periotome

Setting a Computer Up to Run Warrior - Scientific Data Systems

Heat Pump Defrost Controls Pump Information and Data/Defrost...• Electronic operation similar to electro-mechanical timers ... compressor run timer starts accruing run time. A test

MSR/MSB Mechanical Setting Tool - MAP Oil Tools · MSR/MSB Mechanical Setting Tool FEATURES: • Special designed Bow Spring provides positive control and allows one size Mechanical

MORGAN ROD REDUCING/SIZING MILL SETTING … ROD REDUCING/SIZING MILL SETTING THE STANDARD IN ROD ROLLING FOR UNSURPASSED PRODUCTIVITY, TOLERANCES AND MECHANICAL PROPERTIES A Morgan

Molecular Modeling for Calculation of Mechanical ... · PDF fileMolecular Modeling for Calculation of Mechanical Properties of ... The LAMMPS[22] software was used to run these molecular

Pearson Diploma in Mechanical – Machine Tool Setting (QCF ... · Diploma in Mechanical Manufacturing Engineering – Machine Tool Setting ... Setting Honing and Lapping Machines

Mechanical Systems of Motor Module - Rochester …edge.rit.edu/edge/P07202/public/Mechanical/Documentation... · Mechanical Systems of Motor Module ... The motor will run on DC as

Setting a Computer Up to Run Warrior...15 Setting a Computer Up To Run Warrior 1.5 Warrior Shortcut Icon Perhaps the easiest way to set up a short cut to a program group is through

Setting Up A Run on HiSeq CtlSft (Control Software (HCS2 ......Setting Up A Run on HiSeq CtlSft (Control Software (HCS2 0)HCS2.0) 11 立ち上げ画面:: モモド選択ード選択