medical gas outlets - presblock - medical gas... · premium medical gas outlets gas outlets or...

MEDICAL GAS OUTLETS

l DIN 13260-2 l BS 5682:1998 l BS 8532:2011 l SS 875 24 30 l AFNOR NF S 90-116 / FD S 90-119 l AS 2896 l JIS T 7101

l UNI 9507 l ENV 737-6 l EN 15908 l AGSS EN ISO 9170-2 l AIR MOTOR ENV 737-6

2 0 1 5

premium

MEDICAL GAS OUTLETS

GAS OUTLETS OR RAnGE 3

UnI 9507 GAS OUTLETS 13

PRObES 15

nIST COnnECTORS 18

AnAESThETIC GAS SCAvEnGInG SySTEM (AGSS) AnD AIR MOTOR 20

ACCESSORIES 24

PRES BLOCK s.p.a. 3 Med ical Gas Outlets

vERTICAL InLET bASE bLOCk OR RAnGE

P/N A øB Gas

ZARMOR-O 18,7 8 OxygenZARMOR-V 18,7 8 VacuumZARMOR-A4 18,7 8 AirZARMOR-P 18,7 8 Nitrous oxideZARMOR-A8 18,7 8 Air-800ZARMOR-C 18,7 8 Carbon dioxideZARMOR-OP 18,7 8 Oxygen/Nitrous oxideZARMOR10-O 18,7 10 OxygenZARMOR10-V 18,7 10 VacuumZARMOR10-A4 18,7 10 AirZARMOR10-P 18,7 10 Nitrous oxideZARMOR10-A8 18,7 10 Air-800ZARMOR10-C 18,7 10 Carbon dioxideZARMOR10-OP 18,7 10 Oxygen/Nitrous oxide

c/w plug for test.

45° SIDE InLET bASE bLOCk OR RAnGE

P/N A øB Gas

ZARMOR-45-O 18,7 8 OxygenZARMOR-45-V 18,7 8 VacuumZARMOR-45-A4 18,7 8 AirZARMOR-45-P 18,7 8 Nitrous oxideZARMOR-45-A8 18,7 8 Air-800ZARMOR-45-C 18,7 8 Carbon dioxideZARMOR-45-OP 18,7 8 Oxygen/Nitrous oxideZARMOR10-45-O 18,7 10 OxygenZARMOR10-45-V 18,7 10 VacuumZARMOR10-45-A4 18,7 10 AirZARMOR10-45-P 18,7 10 Nitrous oxideZARMOR10-45-A8 18,7 10 Air-800ZARMOR10-45-C 18,7 10 Carbon dioxideZARMOR10-45-OP 18,7 10 Oxygen/Nitrous oxide

c/w plug for test.

A3645

ØB

9

A

36

45 ØB

GAS OUTLETS OR RAnGEThe terminal units of a medical gas pipeline system are

devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances.

An incorrect connection puts to hazard the life of patients, therefore the terminal units have been designed following different technical standards so to grant a non-interchange-

ability among different gases and prevent from any possible mistake.

The OR range socket can be fixed to the base block in only one position.

The profile of the installed socket is always in the correct position.

Base BlOck OR RanGeThis component is the part of the terminal unit connected to the medical gas pipeline distribution system (suction in case of vacu-um). The base blocks are designed complying with the standard EN ISO 9170-1 for design and manufacture requirements.All base blocks, except those for vacuum, are supplied with a maintenance valve to be fitted after the plumbing is completed.

Materials:Brass EN 12164 - CuZn39Pb3NBR/EPDMAISI


vERTICAL InLET bASE bLOCk OR RAnGE C/w COPPER PIPE

P/N A øB Gas

ZARMOR-T-O 18,7 8 OxygenZARMOR-T-V 18,7 8 VacuumZARMOR-T-A4 18,7 8 AirZARMOR-T-P 18,7 8 Nitrous oxideZARMOR-T-A8 18,7 8 Air-800ZARMOR-T-C 18,7 8 Carbon dioxideZARMOR-T-OP 18,7 8 Oxygen/Nitrous oxideZARMOR10-T-O 18,7 10 OxygenZARMOR10-T-V 18,7 10 VacuumZARMOR10-T-A4 18,7 10 AirZARMOR10-T-P 18,7 10 Nitrous oxideZARMOR10-T-A8 18,7 10 Air-800ZARMOR10-T-C 18,7 10 Carbon dioxideZARMOR10-T-N 18,7 10 NitrogenZARMOR10-T-OP 18,7 10 Oxygen/Nitrous oxide

c/w plug for test.

45° SIDE InLET bASE bLOCk OR RAnGE C/w COPPER PIPE

P/N A øB Gas

ZARMOR-45T-O/1 18,7 8 OxygenZARMOR-45T-V/1 18,7 8 VacuumZARMOR-45T-A4/1 18,7 8 AirZARMOR-45T-P/1 18,7 8 Nitrous oxideZARMOR-45T-A8/1 18,7 8 Air-800ZARMOR-45T-C/1 18,7 8 Carbon dioxideZARMOR-45T-OP/1 18,7 8 Oxygen/Nitrous oxideZARMOR1045T-O/1 18,7 10 OxygenZARMOR1045T-V/1 18,7 10 VacuumZARMOR1045TA4/1 18,7 10 AirZARMOR1045T-P/1 18,7 10 Nitrous oxideZARMOR1045TA8/1 18,7 10 Air-800ZARMOR1045T-C/1 18,7 10 Carbon dioxideZARMOR1045TOP/1 18,7 10 Oxygen/Nitrous oxide

c/w plug for test.

bASE bLOCk OR RAnGE C/w bACk COPPER PIPE

P/N A øB Gas

ZARMORD-T-O 23,7 8 OxygenZARMORD-T-V 23,7 8 VacuumZARMORD-T-A4 23,7 8 AirZARMORD-T-P 23,7 8 Nitrous oxideZARMORD-T-A8 23,7 8 Air-800ZARMORD-T-C 23,7 8 Carbon dioxideZARMORD-T-N 23,7 8 Nitrogen

c/w plug for test.

bASE bLOCk OR RAnGE fOR fLExIbLE hOSE

P/N A øB Gas

ZARMORD-O-PG6 18,7 6 OxygenZARMORD-V-PG8 18,7 8 VacuumZARMORD-A4-PG6 18,7 6 AirZARMORD-P-PG6 18,7 6 Nitrous oxideZARMORD-A8-PG6 18,7 6 Air-800ZARMORD-C-PG6 18,7 6 Carbon dioxideZARMORD-N-PG6 18,7 6 Nitrogen

c/w plug for test.

ØB

45

150

36 A

ØB A36

45

ØB

45

150

36 A

3650

ØB

45

A


bASE bLOCk OR RAnGE fOR fLExIbLE hOSE

P/N A øB Gas

ZARMOR-PG6-O 23,7 6 OxygenZARMOR-PG8-V 23,7 8 VacuumZARMOR-PG6-A4 23,7 6 AirZARMOR-PG6-P 23,7 6 Nitrous oxideZARMOR-PG6-A8 23,7 6 Air-800ZARMOR-PG6-C 23,7 6 Carbon dioxideZARMOR-PG6-N 23,7 6 Nitrogen

c/w plug for test.

ROTATInG bASE bLOCk OR RAnGE C/w hOSETAIL

P/N A øB Gas

ZARMORG-PG6-O 30 6 OxygenZARMORG-PG8-V 30 8 VacuumZARMORG-PG6-A4 30 6 AirZARMORG-PG6-P 30 6 Nitrous oxideZARMORG-PG6-A8 30 6 Air-800ZARMORG-PG6-C 30 6 Carbon dioxideZARMORG-PG6-N 30 6 Nitrogen

c/w plug for test.

bASE bLOCk OR RAnGE C/w nIST COnnECTOR

P/N A Gas

ZARMORD-O-MNIST 23,7 OxygenZARMORD-V-MNIST 23,7 VacuumZARMORD-A4-MNIST 23,7 AirZARMORD-P-MNIST 23,7 Nitrous oxideZARMORD-A8-MNIST 23,7 Air-800ZARMORD-C-MNIST 23,7 Carbon dioxideZARMORD-N-MNIST 23,7 Nitrogen

c/w plug for test.

36A

ØB

45

69

ØB

A

34

A

65


DIN 13260-2

DIn ORPhEUS

P/N Gas

VGTDEP-OR-O OxygenVGTDEP-OR-V VacuumVGTDEP-OR-A4 AirVGTDEP-OR-P Nitrous oxideVGTDEP-OR-C Carbon dioxideVGTDEP-OR-N Nitrogen

Supplied with releaser sleeve that can be custom made on request.

Connecting backside and sleeve made of plastic.

DIn ORPhEUS PLUS

P/N Gas

VGTDE-OR-O OxygenVGTDE-OR-V VacuumVGTDE-OR-A4 AirVGTDE-OR-P Nitrous oxideVGTDE-OR-C Carbon dioxideVGTDE-OR-N Nitrogen


Connecting backside made of metal and sleeve of plastic.

DIn ORPhEUS PREMIUM

P/N Gas

VGTDEM-OR-O OxygenVGTDEM-OR-V VacuumVGTDEM-OR-A4 AirVGTDEM-OR-P Nitrous oxideVGTDEM-OR-C Carbon dioxideVGTDEM-OR-N Nitrogen


Connecting backside and sleeve made of metal.

Ø 5

3

43

Ø 5

3

43

Ø 5

3

43

sOckets OR RanGeThe socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gas-specific connecting point.These sockets have been designed in accordance with the fol-lowing standards:BS 5682:1998, DIN 13260-2, NF S 90-116, FD S 90-119, SS 875 24 30, JIS T 7101, AS 2896 and ENV 737-6 for the dimen-sions of linking point to the probe;EN ISO 9170-1 for design and manufacture requirements.

Materials:Brass EN 12164 - CuZn39Pb3 nickel platedNBR/EPDMAISIABS/POM

premium

plus


DIn 13260-2 SOCkET OR RAnGE

P/N Gas

VGTDM-OR-O OxygenVGTDM-OR-V VacuumVGTDM-OR-A4 AirVGTDM-OR-P Nitrous oxideVGTDM-OR-C Carbon dioxideVGTDM-OR-N Nitrogen


DIn 13260-2 hORIzOnTAL SOCkET OR RAnGE

P/N Gas

VGTDMHO-OR-O OxygenVGTDMHO-OR-C Carbon dioxideVGTDMHO-OR-N Nitrogen


BS 5682:1998

bS 5682:1998 SOCkET OR RAnGE

P/N Gas

VGTBSM-OR-O OxygenVGTBSM-OR-V VacuumVGTBSM-OR-A4 AirVGTBSM-OR-P Nitrous oxideVGTBSM-OR-A8 Air-800


bS 5682:1998 hORIzOnTAL SOCkET OR RAnGE

P/N Gas

VGTBSMHO-OR-O OxygenVGTBSMHO-OR-V VacuumVGTBSMHO-OR-A4 AirVGTBSMHO-OR-P Nitrous oxideVGTBSMHO-OR-A8 Air-800


45

Ø45

45

Ø45

Ø50

44,5

Ø50

44,5


bS 5682:1998 PLASTIC SOCkET OR RAnGE

P/N Gas

VGTBSP-OR-O OxygenVGTBSP-OR-V VacuumVGTBSP-OR-A4 AirVGTBSP-OR-P Nitrous oxideVGTBSP-OR-A8 Air-800


BS 8532:2011

AGSS bS 8532:2011 C/w PLASTIC bOx

P/N

VEGS-BS VEGS-BS/1 without box

AGSS bS 8532:2011 C/w nIST COnnECTOR

P/N

VEGS-BS-MNIST

NF S 90-116 and FD S 90-119

AfnOR SOCkET OR RAnGE

P/N Gas

VGTFM-OR-O OxygenVGTFM-OR-V VacuumVGTFM-OR-A4 AirVGTFM-OR-P Nitrous oxideVGTFM-OR-A8 Air-800VGTFM-OR-C Carbon dioxide

43

Ø50

Ø 12

150

42

2412

M27

x1


bULkhEAD nUT

P/N A B Colour

PGTF/1 18,7 36,6 grey

GAS IDEnTIfICATIOn RInG

P/N A B Disting.colour Gas

ZGTF-O 38 55 white OxygenZGTF-V 38 55 yellow VacuumZGTF-A4 38 55 black-white AirZGTF-P 38 55 blue Nitrous oxideZGTF-A8 38 55 white-black Air-800ZGTF-C 38 55 grey Carbon dioxideZGTFD70-O 38 70 white OxygenZGTFD70-V 38 70 yellow VacuumZGTFD70-A4 38 70 black-white AirZGTFD70-P 38 70 blue Nitrous oxideZGTFD70-A8 38 70 white-black Air-800ZGTFD70-C 38 70 grey Carbon dioxide

SS 875 24 30

SS 875 24 30 SOCkET OR RAnGE

P/N Gas

VGTAM-OR-O OxygenVGTAM-OR-V VacuumVGTAM-OR-A4 AirVGTAM-OR-P Nitrous oxideVGTAM-OR-A8 Air-800VGTAM-OR-C Carbon dioxide


SS 875 24 30 hORIzOnTAL SOCkET OR RAnGE

P/N Gas

VGTAMHO-OR-O OxygenVGTAMHO-OR-V VacuumVGTAMHO-OR-A4 AirVGTAMHO-OR-P Nitrous oxideVGTAMHO-OR-A8 Air-800VGTAMHO-OR-C Carbon dioxide


A

M27

x1

B

3

A

B

43

Ø45

43

Ø45


ENV 737-6

Env 737-6 SOCkET OR RAnGE

P/N Gas

VGTEM-OR-O OxygenVGTEM-OR-V VacuumVGTEM-OR-A4 AirVGTEM-OR-P Nitrous oxideVGTEM-OR-A8 Air-800VGTEM-OR-C Carbon dioxide


JIS T 7101

JIS T 7101 SOCkET OR RAnGE

P/N Gas

VGTJSM-OR-O OxygenVGTJSM-OR-V VacuumVGTJSM-OR-A4 AirVGTJSM-OR-P Nitrous oxide

AS 2896

AS 2896 OUTLET

P/N øB Gas

VGTAS-O 1/4’’ OxygenVGTAS-V 5/16’’ VacuumVGTAS-A4 1/4’’ AirVGTAS-P 1/4’’ Nitrous oxideVGTAS-A8 1/4’’ Air-800VGTAS-C 1/4’’ Carbon dioxideVGTAS-N 1/4’’ Nitrogen

AS 2896 OUTLET C/w nIST COnnECTOR

P/N Gas

VGTAS-O-MNIST OxygenVGTAS-V-MNIST VacuumVGTAS-A4-MNIST AirVGTAS-P-MNIST Nitrous oxideVGTAS-A8-MNIST Air-800VGTAS-C-MNIST Carbon dioxideVGTAS-N-MNIST Nitrogen

52

Ø53

Ø50

45

48

Ø50

Ø B

150

49

Ø 5

0

200

M22x1,5


AS 2896 AnAESThETIC GAS SCAvEnGE

P/N øB

VEGS-AS 8

AS 2896 AnAESThETIC GAS SCAvEnGE C/w nIST COnnECTOR

P/N

VEGS-AS-MNIST

50

Ø B

50

M22x1,5

200


Plastic BOxes fOR teRMinal units OR

bOx wIThOUT LID

P/N A B Profile

ZBOX-GT-OR 56,8 46,2 suitable for DIN 13260-2 and SS 875 24 30 standardsZBOX-GT-OR/01 56,8 52,5 suitable for BS 5682:1998 and JIS T 7101 standardsZBOX-GT-OR/02 58,8 55 suitable for ENV 737-6 standard and DIN ORPHEUS

Suitable to be either flush-mounted or wall-mounted.

bOx C/w LID fOR AfnOR OUTLET

P/N

ZBOXGTF c/w locking nut ZBOXGTF/1

LID fOR bhU AfnOR OUTLET

P/N

BOXGTF c/w locking nut BOXGTF-1

99A

79

19

B

65

65 67

46

15

65

65

56


bASE bLOCk C/w COnnECTOR TO wELD

P/N Gas

ZARM60-O/PB OxygenZARM60-V/PB VacuumZARM60-A4/PB AirZARM45-P/PB Nitrous oxideZARM60-A8/PB Air-800ZARM60-C/PB Carbon dioxide

hExAGOnAL hEAD PLUG fOR bASE bLOCk

P/N A Disting.colour Gas

AGT-O/TPP M22x1,5D white OxygenAGT-V/TPP M24x1,5D yellow VacuumAGT-A4/TPP M20x1,5S black AirAGT-P/TPP M16x1,5D blue Nitrous oxideAGT-A8/TPP M18x1,5D black Air-800AGT-C/TPP M20x1,5D grey Carbon dioxide

c/w O-ring

8

32

Ø36

A

Ch 7

17 57

UnI 9507 GAS OUTLETSThe terminal units of a medical gas pipeline system are

devices used to make connections and disconnections in order to provide specific medical gases to medical devices, pulmonary ventilators or other appliances.

An incorrect connection puts to hazard the life of patients,

therefore the terminal units have been designed following different technical standards that ensure the accordance to the European directive 93/42/EEC so to grant a non-inter-changeability among different gases and prevent from any possible mistake.

Base BlOcksThis component is the part of the terminal unit connected to the medical gas pipeline distribution system (suction in case of vacu-um). The base blocks are designed in accordance with the stan-dard EN ISO 9170-1 for design and manufacture requirements.All base blocks, except those for vacuum, are supplied with a maintenance valve to be fitted after the plumbing is completed.

Materials:Brass EN 12164 - CuZn39Pb3NBR/EPDMAISI


UNI 9507

UnI 9507 SOCkET

P/N A Disting.colour Gas

VGTX60-O M22x1,5D white OxygenVGT60-V M24x1,5D yellow VacuumVGT60-A4 M20x1,5S black-white AirVGT45-P M16x1,5D blue Nitrous oxideVGT60-A7 M18x1,5D white-black Air-800VGT60-C M20x1,5D grey Carbon dioxide

The sleeve can be custom made on request.

Plastic BOxes

bOx wIThOUT LID SUITAbLE fOR UnI 9507 OUTLETS

P/N

BOX-GT

Suitable to be either flush-mounted or surface-mounted

Supplied with:

- service cap;

- components designed to link the boxes to form a series.

45

A

95,5

7

Ø53

20

36,5

69

85

85107

sOckets

The socket is the female part of the terminal unit connected to the base block by a gas specific interface and which contains the gas-specific connecting point.These sockets have been designed in accordance with the fol-lowing standards:UNI 9507;EN ISO 9170-1 for design and manufacture requirements.

Materials:Brass EN 12164 - CuZn39Pb3 nickel platedNBR/EPDMAISIABS/POM


UNI 9507

ELbOw bARb EnD PRObE

P/N Disting.colour H Gas

IGTG60-PG6-O white 6 OxygenIGTG60-PG8-V yellow 8 VacuumIGTG60-PG6-A4 black-white 6 AirIGTG45-PG6-P blue 6 Nitrous oxideIGTG60-PG6-A7 white-black 6 Air-800IGTG60-PG6-C grey 6 Carbon dioxide

Supplied with sticky label that can be custom made on request.

NF S 90-116 and FD S 90-119

STRAIGhT bARb EnD PRObE


IGTF-PG6-O white 6 OxygenIGTF-PG8-V yellow 8 Vacuum IGTF-PG6-A4 black-white 6 AirIGTF-PG6-P blue 6 Nitrous oxideIGTF-PG6-A8 white-black 6 Air-800IGTF-PG6-C grey 6 Carbon dioxide

Supplied with sleeve that can be custom made on request.



IGTGF-PG6-O white 6 OxygenIGTGF-PG8-V yellow 8 VacuumIGTGF-PG6-A4 black-white 6 AirIGTGF-PG6-P blue 6 Nitrous oxideIGTGF-PG6-A8 white-black 6 Air-800IGTGF-PG6-C grey 6 Carbon dioxide

Supplied with the sleeve that can be custom made on request.

55

6235

H

H

51

H

48

PRObESAll these male connectors to be coupled to the sockets are

non-interchangeable and are designed in accordance with the following standards:

UNI 9507, NF S 90-116, FD S 90-119, DIN 13260-2, BS 5682:1998, SS 875 24 30 and ENV 737-6 for the dimen-sions of linking point to the socket;

EN ISO 9170-1 for design and manufacture require-ments.

Materials:Brass EN 12164 - CuZn39Pb3 nickel platedAISINBR/EPDMPE/POM/ABS


STRAIGhT SwIvEL MALE ThREADED PRObE

P/N B Disting.colour Gas

IGTF-OR-M12-O M12x1 white OxygenIGTF-OR-M12-V M12x1 yellow VacuumIGTF-OR-M12-A4 M12x1 white-black AirIGTF-OR-M12-P M12x1 blue Nitrous oxideIGTF-OR-M12-C M12x1 grey Carbon dioxideIGTF-OR-M1/8-O 1/8’’ white OxygenIGTF-OR-M1/8-V 1/8’’ yellow VacuumIGTF-OR-M1/8-A4 1/8’’ white-black AirIGTF-OR-M1/4-O 1/4’’ white OxygenIGTF-OR-M1/4-V 1/4’’ yellow Vacuum

Supplied with the sleeve that can be custom made on request.

DIN 13260-2



IGTGD-PG6-O white 6 OxygenIGTGD-PG8-V yellow 8 VacuumIGTGD-PG6-A4 black-white 6 AirIGTGD-PG6-P blue 6 Nitrous oxideIGTGD-PG6-C grey 6 Carbon dioxideIGTGD-PG6-N black 6 Nitrogen


ELbOw bARb EnD PRObE wITh ChECk vALvE


IIGTGD-PG6-O white 6 OxygenIIGTGD-PG6-A4 black-white 6 AirIIGTGD-PG6-P blue 6 Nitrous oxideIIGTGD-PG6-C grey 6 Carbon dioxide


ENV 737-6



IGTGE-PG6-O white 6 OxygenIGTGE-PG8-V yellow 8 VacuumIGTGE-PG6-A4 black-white 6 AirIGTGE-PG6-P blue 6 Nitrous oxideIGTGE-PG6-A8 white-black 6 Air-800IGTGE-PG6-C grey 6 Carbon dioxide


B

Ch 20

46

41,555

H

22

28

64

55

H

22

28

64

H

55

4160


BS 5682:1998


P/N H Gas

IGTBS-PG6-O 6,5 OxygenIGTBS-PG8-V 8 VacuumIGTBS-PG6-A4 6,5 AirIGTBS-PG6-P 6,5 Nitrous oxideIGTBS-PG6-A8 6,5 Air-800

Made of nickel plated brass.

SS 875 24 30


P/N H Gas

IGTA-PG6-O 6 OxygenIGTA-PG10-V 10 VacuumIGTA-PG8-A4 8 AirIGTA-PG6-P 6 Nitrous oxideIGTA-PG8-A8 8 Air-800IGTA-PG6-C 6 Carbon dioxide

66

H


1ST fIx nIST COnnECTOR C/w COPPER PIPE wELDED

P/N A Gas

VGTN-PL-O-T1/2 1/2’’ OxygenVGTN-PL-A4-T1/2 1/2’’ AirVGTN-PL-V-T1/2 1/2’’ VacuumVGTN-PL-P-T1/2 1/2’’ Nitrous oxideVGTN-PL-C-T1/2 1/2’’ Carbon dioxideVGTN-PL-A8-T1/2 1/2’’ Air-800

PL = free flow

1ST fIx nIST COnnECTOR C/w ChECk vALvE AnD COPPER PIPE wELDED

P/N A Gas

VGTN-O-T10 10 OxygenVGTN-A4-T10 10 AirVGTN-V-T12 12 VacuumVGTN-P-T10 10 Nitrous oxideVGTN-C-T10 10 Carbon dioxideVGTN-A8-T10 10 Air-800VGTN-AGSS-T15* 15 AGSS

*No check valve

1ST fIx nIST COnnECTOR C/w hOSETAIL & ChECk vALvE

P/N A Gas

VGTN-O-PG6 6 OxygenVGTN-A4-PG6 6 AirVGTN-V-PG8 8 VacuumVGTN-P-PG6 6 Nitrous oxideVGTN-C-PG6 6 Carbon dioxideVGTN-A8-PG6 6 Air-800

1ST fIx nIST COnnECTOR C/w hOSETAIL

P/N A Gas

VGTN-PL-O-PG6 6 OxygenVGTN-PL-A4-PG6 6 AirVGTN-PL-V-PG8 8 VacuumVGTN-PL-P-PG6 6 Nitrous oxideVGTN-PL-A8-PG6 6 Air-800VGTN-PL-C-PG6 6 Carbon dioxide

PL= free flow

M22

x1,5

120

161,5

A

Ch 29

M22

x1,5

200

150

Ch 32

A

Ch22

205

M22

x1,

A

21

70

59

M22

x1,5

21

Ch17

A

nIST COnnECTORSRange of male and female components intended to main-

tain gas-specificity by allocation of a set of different diameters and screw thread to mating components to each gas. These connectors are suitable for medical gases when the pressure range is 300 kPa - 1400 kPa and for vacuum when the pres-sure range is 10 kPa - 100 kPa.

These components are designed in accordance with the standard EN 15908

Materials:Brass EN 12164 - CuZn39Pb3 nickel platedNBR/EPDMAISI


nIST STRAIGhT bARb EnD PRObE

P/N A Gas

IGTN-PG6-O 6 OxygenIGTN-PG8-V 8 VacuumIGTN-PG6-A4 6 AirIGTN-PG6-P 6 Nitrous oxideIGTN-PG6-A8 6 Air-800IGTN-PG6-OA 6 Air/Oxygen

1ST fIx nIST COnnECTOR C/w M1/4’’ ThREAD

P/N A Gas

VGTN-O-M1/4 1/4’’ OxygenVGTN-V-M1/4* 1/4’’ VacuumVGTN-A4-1/4 1/4’’ Air

* Free flow

A

M22

x1,5

25

60,5M

22x1

,5

A

11

60

Ch 23


AGSS TyPE 1L OUTLET fOR CEnTRALIzED SySTEM

P/N Disting.colour

VEGS120/EN1 magenta

Supplied with metal sleeve that can be custom made on request.

AGSS TyPE 1L ACTIvE

P/N Disting.colour øA øB

VEGA120/EN1 magenta 10 (supply) 16 (evacuation)

Supplied with:

- adjusting screw for setting following the standard EN ISO 7396-2

.- green suction indicator.

- sleeve that can be custom made on request.

- manifold for connecting the exhaust copper pipe.

Ø50

Ø12

47,531,5

Ø65

Ø50

ØB

ØA

AnAESThETIC GAS SCAvEnGInG SySTEM (AGSS) AnD AIR MOTOR

They are the part of system to which the operator makes connection and disconnection for exhausting the medical gases coming from anaesthetic and breathing systems.

To grant the gas-specifity and prevent any mistake, these

terminal units have been designed in accordance to the euro-pean standard EN ISO 9170-2 that ensure the conformity to the european directive 93/42/EEC, taken as reference.

en isO 9170-2 aGss sOcketsThese are the female parts of a terminal unit attached to the base block by a gas-specific interface which contain the gas-specific connection point.

Materials:Brass EN 12164 - CuZn39Pb3Aluminium series 2000 or 6000SteelNBRAISIPA/POM


AGSS TyPE 1L ACTIvE C/w bULkhEAD PLATE

P/N Disting.colour øA øB

VEGA120/EN2 magenta 10 (supply) 16 (evacuation)

Supplied with:

- adjusting screw for setting following the standard EN ISO 7396-2.

- green suction indicator.


- manifold for connecting the exhaust copper pipe.

AGSS TyPE 1L ACTIvE fOR CEILInG PEnDAnTS

P/N Disting.colour øA

VEGA120/EN3 magenta 10 (supply )

Supplied with:

- adjusting screw for setting following the standard EN ISO 7396-2.

- green suction indicator.


- adapter for connecting the exhaust copper pipe or flexible hose.

bOx fOR AGSS ACTIvE OUTLET

P/N

BOX-AGSS

Made of aluminium.

Ø65

Ø50

ØB

ØA

Ø65

Ø50

15

20ØA

60

52

120

125

252

212

Ø13

157

20


60° bARb EnD TyPE 1L

P/N Disting.colour D øG E

IEGG120-PG22/EN magenta 30 22 63

D

Ø G

60°E

30

en isO 91790-2 aGss PROBes These are the male non-interchangeable parts to be connected to the outlets.

Materials:Aluminium series 2000 or 6000 anodized

aiR MOtOR enV 737-6This terminal unit integrates a medical tool drive outlet with a gas scavenging terminal unit.

Materials:Brass EN 12164 - CuZn39Pb3 nickel platedSteelNBRAnodized Aluminium

Env 737-6 OUTLET fOR CEILInG PEnDAnTS

P/N

VAM737-PG6

Ø9

Ø15

82

Ø70

Ø64


Env 737-6 OUTLET C/w COPPER PIPES

P/N

VAM737-TL

Env 737-6 bARb EnD PRObE

P/N

IAM737-PG6

Ø15

Ø70

Ø64

A

6068

Ø8

55,5

163

1020

Ø6


ACCESSORIES

adaPteRs fOR aMBulancesMaterials:Brass EN 12164 - CuZn39Pb3NBR/EPDMAISIABS/POMAluminium

ADAPTER wITh OnE AfnOR nf S 90-116 SOCkET AnD bARb EnD InLET

P/N A Gas

AGTF-1V-PG6-V 6 Vacuum

ADAPTER wITh TwO AfnOR nf S 90-116 SOCkETS AnD bARb EnD InLET

P/N A Gas

AGTF-2V-PG6-O 6 OxygenAGTF-2V-PG6-V 6 Vacuum

ADAPTER wITh ThREE AfnOR nf S 90-116 SOCkETS AnD bARb EnD InLET

P/N A Gas

AGTF-3V-PG6-O 6 Oxygen

ADAPTER wITh fOUR AfnOR nf S 90-116 SOCkETS AnD bARb EnD InLET

P/N A Gas

AGTF-4V-PG6-O 6 Oxygen

24

20

A

26

60

A 110

62 24

20

26

A 117

40 19

20

26A 156

40

20

26

18


ADAPTER wITh OnE SS 875 24 30 SOCkET AnD bARb EnD InLET

P/N A Gas

AGTA-1V-O 6 Oxygen

ADAPTER wITh TwO SS 875 24 30 SOCkETS AnD bARb EnD InLET

P/N A Gas

AGTA-2V-O 6 Oxygen

ADAPTER wITh TwO DIn 13260-2 SOCkETS AnD bARb EnD InLET

P/N A Gas

AGTD-2V-O 6 OxygenAGTD-2V-A4 6 Air

ADAPTER wITh fOUR DIn 13260-2 SOCkETS AnD bARb EnD InLET

P/N A Gas

AGTD-4V-O 6 OxygenAGTD-4V-A4 6 Air

A

54

42

21

A

54

110

68 21

64,5

110

A

6820,5

A

64,5

68 20,5

190


Quick cOuPleRs fOR flOwMeteR and ReGulatOR

DIn MInI SOCkET MALE ThREADED

P/N øA Gas

VGTD-O-M1/4 1/4’’ OxygenVGTD-A4-M1/4 1/4’’ AirVGTD-V-M1/4 1/4’’ VacuumVGTD-P-M1/4 1/4’’ Nitrous oxideVGTD-C-M1/4 1/4’’ Carbon dioxideVGTD-O-M3/8 3/8’’ Oxygen

DIn MInI SOCkET wITh bARb EnD

P/N A Gas

VGTD-O-PG6 6 OxygenVGTD-A4-PG6 6 Air

SS MInI SOCkET MALE ThREADED

P/N A Gas

VGTA-O-M10X1 M10x1 OxygenVGTA-A4-M10X1 M10x1 AirVGTA-P-M10X1 M10x1 Nitrous oxideVGTA-C-M10X1 M10x1 Carbon dioxideVGTA-O-M1/4 1/4’’ OxygenVGTA-A4-M1/4 1/4’’ Air

AfnOR MInI SOCkET MALE ThREADED

P/N B øA Gas

VGTF-O-M1/4 6,5 1/4’’ OxygenVGTF-A4-M1/4 6,5 1/4’’ AirVGTF-O-M3/8 10 3/8’’ OxygenVGTF-A4-M3/8 10 3/8’’ AirVGTF-V-M3/8 10 3/8’’ Vacuum

bS MInI SOCkET MALE ThREADED

P/N A L Gas

VGTBS-O-M1/4/V 1/4’’ 60 Oxygen

2610

41,5

ØA

Ch27

A

50,5

Ch 27

A

41

Ch 24

ØA

39

Ch23

25

B

A

L


JIS MInI SOCkET MALE ThREADED

P/N A L Gas

VGTJS-O-M1/4 1/4’’ 54,5 Oxygen

AS MInI SOCkET MALE ThREADED

P/N A L Gas

VGTAS-O-M1/4 1/4’’ 47 Oxygen

UnI MInI SOCkET MALE ThREADED

P/N A L Gas

VGTI60-O-M1/4 1/4’’ 56 Oxygen VGTI60-O-M3/8 3/8’’ 41 Oxygen

flexiBle hOses fOR Medical Gas

fLExIbLE hOSE fOR En ISO 5359 ASSEMbLIES

P/N Disting.colour Gas

NTPB6x12-O white OxygenNTPB8x14-V yellow VacuumNTPB6x12-A4 white-black AirNTPB6x12-P blue Nitrous oxideNTPB6x12-C grey Carbon dioxideNTPB6x12-NC black -

50 meters coil.

Without DEHP.

A

L

A

L

A

L

plus PB

CTG

TGB

PRES BLOCK S.p.A. - Via Alpignano, 151-155

I - 10040 CASELETTE (TO) Tel. +39 011 9688055 (r.a.) - Fax +39 011 9688668

http://www.presblock.com e-mail: [email protected] [email protected]

The products described herein, including without limitation, product features, specifications, designs are subject to change by Pres Block at any time without notice.

medical gas outlets - presblock - medical gas... · premium medical gas outlets gas outlets or...

Documents