mercer's marine & outdoor 2011-2012 product catalogue

Announcing the new ultimatein liquid maneuverabil ity.

NASDAQ GRMN

GPSMAP 6000/7000 series with Garmin G Motion technology.

Delivering nearly two times the map-drawing agility and performance

of their predecessors, these high-speed machines take network

navigation to a whole new liquid-smooth level. Sized from 8.4 to 15

inches, they offer a choice of touchscreen or keypad operation. And

their exclusive Garmin G Motion technology makes map panning,

zooming, turning and updating virtually seamless in all dimensions.

The units are self-contained for easy installation. Plus, both NMEA 2000

and Garmin Marine Network connectivity enable quick access to every-

thing from autopilot and engine sensors to VHF radios, onboard radar,

digital sonar, XM WX satellite weather1, live-cam video, and more

right from your chartplotter screen. More control. With less complexity.

Thats the Garmin way.

Follow the leader.

www.garmin.com2010 Garmin Ltd. or its subsidiaries1 Subscription required for optional XM weather (sold separately).

SALES POLICY

PRICINGWe publish our catalogue every 2 years, therefore price changesare bound to occur. Prices on our new website are alwayscurrent. While we hope to maintain our prices until the end of2011, they are subject to change without notice, due tounforeseen changes in costs or inadvertent typographical errorsin catalogue production. Prices do not include shipping chargesor applicable taxes. All prices in this catalogue are in Canadiandollars.

SHIPPINGWe ship by courier, transport truck, post and coastal boat. Wehave negotiated special rates with many carriers which we willpass on to our customers. The least expensive method ofshipping is to use your credit card in order to avoid C.O.D. fees.This could save you from $5 to $25 on shipping costs. Pleasenote, maximum weight shippable by post is 30kg and maximumlength is 2 meters. Also, all liquids, paints, pressurized containersand flares cannot be shipped by post and some carriers maycharge a Dangerous Goods Fee for these products.

PRODUCTSPECIFICATIONSAs manufacturers reserve the right to make changes to theirproduct without notice, we cannot be liable for the accuracy ofproduct information.To the best of our ability, the informationprovided in this catalogue is believed to be accurate. We,however, wish to emphasize that for total accuracy oninformation, manufacturers literature can be provided byrequest or by visiting the manufacturers website.

TERMS & PRIVACYWe accept cash, Visa, Mastercard, in-store Debit Card (Interac),and ship C.O.D. within the province of Newfoundland &Labrador Only. Please be sure to have credit card number aswell as expiry date when ordering. Products will not beshipped until credit card authorization has been obtained. Yourprivacy is important to us! We want you to know that we holdyour financial and other personal information in strictconfidence. We do not sell, share or trade our customerspersonal information to marketing companies or informationbrokers.

RETURNS, EXCHANGES& WARRANTY

1. Returned goods must include invoice number and date ofpurchase.

2. Goods must be returned, prepaid, within 30 days ofpurchase and must be in original condition andundamaged packaging.

3. Warranties will be as stated by manufacturer unlessotherwise stated by Mercers Marine.

4. We can not accept returns on special order items, cuthose or cut chain.

HOURSOFOPERATIONMonday - Thursday .................................... 8:30 - 5:30

Friday ........................................................ 8:30 - 9:00

Saturday.................................................... 8:30 - 5:00

Mercers Marine products may be purchased from any of our Authorized Dealers throughout Canada. For the name of theDealer nearest you, please contact us. You can also order directly from this catalogue or our website at

www.mercersmarine.com

PHILIP MERCERPresident

[email protected]

SCOTT MERCERVice President

[email protected]

SCOTT BAGGSController

[email protected]

ROBERTA MERCERAdministration

T H E M E R C E R S T E A MThe management and staff of Mercers wish to thank-you for your past business and support. Although we have been providing quality service since 1957, we are still continuing to findways to serve our customers better. Our 2011/2012 catalogue, the largest & best ever, includes480 pages of products, as well as many pages advertising brands sold in-store or online. Wehope you enjoy browsing our catalogue, we are sure that you will agree, Mercers is more thanjust marine. In addition to our catalogue, our customers can shop, 24 hours a day, at ourwebsite: www.mercersmarine.com.From all of us at Mercers we look forward to serving you in the years ahead.

STEVE SIMMONSManager

[email protected]

KIM SMITHAccounting Clerk

[email protected]

DAREN TREMBLETTSales/Electronic Manager/Warranty

[email protected]

KIM MERCERPurchasing

[email protected]

STEVE ADAMSShipping Manager

[email protected]

SHANNON OAKEWebsite Manager/Catalogue Prod.

[email protected]

DONNIE BOWRINGCatalogue Production [email protected]

JASON BAILEYHydraulics

ANGELA BROWNPurchasing/Housewares

[email protected]

DAWN AVERYPurchasing

[email protected]

TODD DAVIS

HILDA SMITHGAIL HOLLOWAY NATASHA LOCKEJENNA BOWRING

JUANITA MILLERGLORIA HART KAREN SUTTONCARLA MARTIN

GLENN NIPPARDREX BALSOM DENNIS IVANY

DOREEN SEAWARDPurchasing/Crafts

[email protected]

COLIN LAKE

JOANN FELTHAMNICK MERCER

4 Visit www.mercersmarine.com for all the latest pricing and information.

Fa

ste

ne

rs

STAINLESS STEEL CARRIAGE BOLTS18-8 Stainless SteelOrd. # Size Price (ea)62-367T.....................1/4" x 1 1/2" ........................0.1962-150T........................1/4" x 2" ...........................0.2262-368T.....................1/4" x 2 1/2" ........................0.2962-151T........................1/4" x 3" ...........................0.3162-152T........................1/4" x 4" ...........................0.4162-153T .......................5/16" x 2" ..........................0.3962-154T .......................5/16" x 3" ..........................0.5262-155T....................5/16" x 3 1/2" .......................0.5762-369T .......................5/16" x 4" ..........................0.6862-156T........................3/8" x 2" ...........................0.6362-157T........................3/8" x 3" ...........................0.8062-158T........................3/8" x 4" ...........................0.9962-159T........................3/8" x 5" ...........................1.1162-360T........................3/8" x 6" ...........................1.3562-370T........................1/2" x 3" .......................... 1.5762-160T........................1/2" x 4" .......................... 1.9062-161T........................1/2" x 5" .......................... 2.0562-162T........................1/2" x 6" .......................... 2.45

STAINLESS STEEL ANNULAR RING NAILS (304)Approx.

NailsOrd. No. Size per lb Price/lb

STAINLESS STEEL FINISH NAILS (304)Approx.

NailsOrd. No. Size per lb Price/lb

62-751R ..............14ga x 1 1/8 ..........547 ..........12.9562-752R ..............14ga x 1 1/4 ..........473 ..........12.9562-755R ..............12ga x 1 1/2 ..........228 ..........12.9562-756R ..............12ga x 1 3/4 ..........193 ..........12.9562-757R ..............12ga x 2 ................175 ..........12.9562-758R ..............12ga x 2 1/4 ..........157 ..........12.9562-759R ..............10ga x 2 1/2............94 ..........12.9562-760R ..............10ga x 3..................79 ..........12.9562-761R ..............10ga x 3 1/2............67 ..........12.95

62-780R ..............15ga x 1 1/4 ..........649 ..........12.9562-781R ..............14ga x 1 1/2 ..........434 ..........12.9562-782R ..............14ga x 1 3/4 ..........375 ..........12.9562-783R ..............13ga x 2 ................247 ..........12.9562-784R ..............12ga x 2 1/2 ..........146 ..........12.95

S.S. LAG SCREWS18-8 Stainless SteelOrd. # Size Price (ea)62-392T......................1/4 x 1 ..............................0.1762-163T ..................1/4" x 1 1/2" ..........................0.2162-346T ....................1/4" x 2" ..............................0.3562-347T ....................1/4" x 3" ..............................0.5262-164T ....................5/16" x 2" ............................0.3262-165T ....................5/16" x 3" ............................0.6962-348T ....................5/16" x 4" ............................0.8862-166T ....................3/8" x 2" ..............................0.6562-167T ....................3/8" x 3" ..............................0.6962-349T ....................3/8" x 4" ..............................0.9562-350T ....................3/8" x 5" ..............................1.3062-359T ....................1/2" x 2" ..............................1.0562-351T ....................1/2" x 3" ..............................1.3962-168T ....................1/2" x 4" ..............................1.9062-169T ....................1/2" x 5" ..............................2.2762-352T ....................1/2" x 6" ..............................2.59

S.S. FINISH WASHERSOrd. # Size Price (ea)62-041T .............................#8 ................................0.0362-042T ............................#10 ...............................0.0462-043T ............................#12 ...............................0.0562-044T ...........................1/4" ..............................0.05

THREADED ROD18-8 Stainless Steel62-179R ......................1/4" x 3 ft...........................3.3062-180R .....................5/16" x 3 ft..........................4.3062-181R ......................3/8" x 3 ft...........................5.9562-182R ......................1/2" x 3 ft.........................11.8562-183R ......................5/8" x 3 ft.........................18.4562-184R ......................3/4" x 3 ft.........................26.9062-543R ......................1/2 x 6 ft.........................23.8062-544R ......................5/8 x 6 ft.........................34.3562-545R ......................3/4 x 6 ft.........................54.95

STAINLESS STEEL SCREWSPan head, Square socket drive, 18-8 tapping screws.Ord.No. Size Price/10062-027T........................#6 x 1/2"...........................2.2562-028T........................#6 x 3/4"...........................2.9562-029T........................#8 x 1/2"...........................3.1062-030T........................#8 x 3/4"...........................3.9562-031T .........................#8 x 1" ............................4.7062-567T ......................#8 x 1 1/4 .........................5.6062-032T.......................#10 x 3/4"..........................5.3062-033T ........................#10 x 1"............................6.8062-034T .....................#10 x 1 1/4"....................... 7.9562-035T .....................#10 x 1 1/2"........................ 8.9562-036T ........................#10 x 2"........................ 10.5062-037T .....................#12 x 1 1/2" ......................11.9062-038T ........................#12 x 2" .........................14.3562-039T .....................#12 x 2 1/2" ......................18.7562-040T ........................#14 x 2" .........................20.55

STAINLESS STEEL SCREWSFlat head, full size, full thread square socket, 18-8stainless screws.Ord.No. Size Price/10062-000T........................#6 x 1/2"...........................2.3562-001T........................#6 x 3/4"...........................2.6062-002T .........................#6 x 1" ............................2.9062-710T ......................#6 x 1 1/2" .........................4.3562-003T........................#8 x 3/4"...........................3.2562-004T .........................#8 x 1 ............................3.9962-005T ......................#8 x 1 1/4" .........................4.9562-006T ......................#8 x 1 1/2" .........................5.9062-344T .........................#8 x 2"........................... 7.1062-711T ......................#8 x 2 1/2" ........................ 8.2562-007T.......................#10 x 3/4" ........................ 5.2062-008T ........................#10 x 1"............................6.1562-009T .....................#10 x 1 1/4" ........................7.2062-010T .....................#10 x 1 1/2" ........................7.5062-011T .....................#10 x 1 3/4" ........................8.7062-012T ........................#10 x 2".......................... 8.9562-339T .....................#10 x 2 1/2" ..................... 10.3562-340T ........................#10 x 3"........................ 11.6062-013T .....................#12 x 1 1/4" ........................8.9062-014T .....................#12 x 1 1/2" ........................9.6562-015T .....................#12 x 1 3/4" ......................11.9062-016T ........................#12 x 2" .........................12.2562-017T.....................#12 x 2 1/4" .................... 12.6062-341T.....................#12 x 2 1/2" ..................... 15.4562-342T ........................#12 x 3"........................ 15.9562-018T .....................#14 x 1 1/4" ......................12.9562-019T.....................#14 x 1 1/ 2" ......................14.4562-021T ........................#14 x 2" .........................16.9062-023T .....................#14 x 2 1/2" ......................19.8562-343T ........................#14 x 3" .........................23.75

Prices are subject to change. Check our website for up to date prices. www.mercersmarine.com 5

Fa

ste

ne

rs

ROUND HEAD MACHINE SCREWS18-8 Stainless Steel62-096T ......................6-32 x 1/2" .........................0.0462-097T ......................6-32 x 3/4" .........................0.0562-098T........................6-32 x 1"...........................0.0562-099T ....................6-32 x 1 1/2"........................0.0762-100T ......................8-32 x 1/2" .........................0.0662-101T ......................8-32 x 3/4" .........................0.0762-102T........................8-32 x 1"...........................0.0862-103T ....................8-32 x 1 1/2"........................0.0862-104T .....................10-32 x 1/2" ........................0.0762-105T .....................10-32 x 3/4" ........................0.0862-106T.......................10-32 x 1"..........................0.0962-107T ...................10-32 x 1 1/2".......................0.1262-108T.......................10-32 x 2"..........................0.1462-361T .....................12-24 x 1/2" ........................0.1362-362T .....................12-24 x 3/4" ........................0.1362-109T.......................12-24 x 1"..........................0.1562-110T ...................12-24 x 1 1/2".......................0.1962-111T.......................12-24 x 2"..........................0.2162-363T ......................1/4" x 1/2" .........................0.1262-112T........................1/4" x 1" ...........................0.1362-113T .....................1/4" x1 1/2" ........................0.1862-114T........................1/4" x 2" ...........................0.2562-115T.....................1/4" x 2 1/2" ........................0.2762-116T........................1/4" x 3" ...........................0.3662-117T........................1/4" x 4" ...........................0.5962-118T .......................5/16" x 1" ..........................0.2662-119T....................5/16" x 1 1/2".....................0.3962-120T .......................5/16" x 2" ..........................0.5462-121T .......................5/16" x 3" ..........................0.5762-122T .......................5/16" x 4" ..........................0.66

FLAT HEAD MACHINE SCREWS18-8 Stainless Steel62-123T ......................6-32 x 1/2" .........................0.0462-124T ......................6-32 x 3/4" .........................0.0562-125T........................6-32 x 1"...........................0.0562-126T ....................6-32 x 1 1/2"........................0.0762-127T ......................8-32 x 1/2" .........................0.0662-128T ......................8-32 x 3/4" .........................0.0662-129T........................8-32 x 1"...........................0.0862-130T ....................8-32 x 1 1/2"........................0.0962-131T .....................10-32 x 1/2" ........................0.0762-132T .....................10-32 x 3/4" ........................0.0962-133T.......................10-32 x 1"..........................0.1062-134T ...................10-32 x 1 1/2".......................0.1262-135T.......................10-32 x 2"..........................0.1362-365T .....................12-24 x 3/4" ........................0.1362-136T.......................12-24 x 1"..........................0.1362-137T ...................12-24 x 1 1/2".......................0.1562-138T.......................12-24 x 2"..........................0.1962-366T ......................1/4" x 1/2" .........................0.1262-139T........................1/4" x 1" ...........................0.1362-140T.....................1/4" x 1 1/2" ........................0.1962-141T........................1/4" x 2" ...........................0.2462-142T ......................1/4" 2 1/2" .........................0.2862-143T........................1/4" x 3" ...........................0.3262-144T........................1/4" x 4" ...........................0.4562-145T .......................5/16" x 1" ..........................0.2362-146T .....................5/16" 1 1/2" ........................0.3362-147T .......................5/16" x 2" ..........................0.4362-148T .......................5/16" x 3" ..........................0.5362-149T .......................5/16" x 4" ..........................0.66

HEX HEAD MACHINE BOLTS316 Stainless Steel62-409T........................1/4" x 1" ...........................0.2062-411T........................1/4" x 2" ...........................0.3562-413T........................1/4" x 3" ...........................0.5262-415T........................1/4" x 4" ...........................0.5962-416T .......................5/16" x 1" ..........................0.3762-418T .......................5/16" x 2" ..........................0.6362-420T .......................5/16" x 3" ..........................0.8762-422T .......................5/16" x 4" ..........................1.1062-423T........................3/8" x 1" ..........................0.5162-425T........................3/8" x 2" ...........................1.0462-427T........................3/8" x 3" ...........................1.4062-429T........................3/8" x 4" ...........................1.4862-431T........................3/8" x 5" ...........................1.6962-433T.....................1/2" x 1 1/2" ........................1.2062-434T........................1/2" x 2" ...........................1.6462-436T........................1/2" x 3" ..........................2.4962-438T........................1/2" x 4" ..........................3.2562-440T........................1/2" x 5" ...........................3.7562-441T ........................1/2 x 6 ...........................3.9062-442T........................5/8" x 2" ...........................2.9862-444T........................5/8" x 3" ...........................3.2562-446T........................5/8" x 4" ...........................4.7662-448T........................5/8" x 5" ...........................5.5062-449T........................5/8" x 6" ...........................5.6062-450T........................3/4" x 2" ...........................4.6062-452T........................3/4" x 3" ...........................5.5962-454T........................3/4" x 4" ...........................5.9062-456T........................3/4" x 5" ...........................6.1062-457T........................3/4" x 6" ...........................6.85

62-045T ......................1/4" x 1/2" .........................0.1062-046T........................1/4" x 1" ...........................0.1562-047T.....................1/4" x 1 1/2" ........................0.1962-048T........................1/4" x 2" ...........................0.2362-049T.....................1/4" x 2 1/2" ........................0.2762-050T........................1/4" x 3" ...........................0.3462-051T........................1/4" x 4" ...........................0.4262-052T .......................5/16" x 1" ..........................0.2362-053T....................5/16" x 1 1/2" ......................0.3162-054T .......................5/16" x 2" ..........................0.4062-055T....................5/16" x 2 1/2" .......................0.4662-056T .......................5/16" x 3" ..........................0.5462-057T....................5/16" x 3 1/2" .......................0.6862-058T .......................5/16" x 4" ..........................0.7562-059T........................3/8" x 1" ...........................0.3162-394T.....................3/8" x 1 1/4" ........................0.3762-060T.....................3/8" x 1 1/2" .......................0.4162-061T........................3/8" x 2" ..........................0.5462-062T.....................3/8" x 2 1/2" ........................0.6562-063T........................3/8" x 3" ...........................0.7762-064T.....................3/8" x 3 1/2" ........................0.91

62-065T........................3/8" x 4" ...........................1.0762-066T........................3/8" x 5" ...........................1.3262-067T........................3/8" x 6" ...........................1.5162-068T .......................7/16" x 1" ..........................0.5262-380T....................7/16" x 1 1/4" .......................0.5762-069T....................7/16" x 1 1/2" .......................0.6262-070T .......................7/16" x 2" ..........................0.7962-071T....................7/16" x 2 1/2" .......................0.9862-072T .......................7/16" x 3" ..........................1.1262-073T .......................7/16" x 4" ..........................1.4762-074T .......................7/16" x 5" .......................1.7662-075T........................1/2" x 1" ...........................0.7562-566T.....................1/2" x 1 1/4" ........................0.8562-076T.....................1/2" x 1 1/2" ........................0.8962-077T........................1/2" x 2" ...........................1.0862-078T.....................1/2" x 2 1/2" ........................1.3362-079T........................1/2" x 3" ...........................1.5862-080T........................1/2" x 4" ...........................1.9962-081T........................1/2" x 5" ...........................2.1862-082T........................1/2" x 6" ...........................2.9062-083T........................5/8" x 1" ...........................1.28

62-084T........................5/8" x 2" ...........................1.6562-562T .....................5/8 x 2 1/4 ........................1.9762-085T.....................5/8" x 2 1/2" ........................2.0762-086T........................5/8" x 3" ...........................2.2862-087T........................5/8" x 4" ...........................3.2062-088T........................5/8" x 5" ...........................3.6562-089T........................5/8" x 6" ...........................4.5962-090T........................3/4" x 2" ...........................2.8562-091T.....................3/4" x 2 1/2" ........................3.0562-092T........................3/4" x 3" ...........................3.1562-093T........................3/4" x 4" ...........................3.9062-094T........................3/4" x 5" ...........................5.5062-095T........................3/4" x 6" ...........................6.35

HEX HEAD MACHINE BOLTS 18-8 STAINLESS STEEL

Ord. # Size Price (ea) Ord. # Size Price (ea)Ord. # Size Price (ea)


Fa

ste

ne

rs

HAND RIVET GUN & RIVETSRivet GunProfessional hand riveter complete with wrench. Acceptsup to 3/16 rivets.62-713P .................................................................8.95STAINLESS STEEL RIVETS18-8 Stainless steel domed head. Stainless rivet andstainless mandrel.Ord. No. Dia. x Max. Grip Price ea.62-513T ......................1/8 x 1/8 .........................0.1162-514T .....................1/8 x 3/16.........................0.1262-515T ......................1/8 x 1/4 .........................0.1462-516T ......................1/8 x 3/8 .........................0.1762-517T .....................3/16 x 1/8.........................0.1962-518T .....................3/16 x 1/4.........................0.2962-519T .....................3/16 x 3/8.........................0.3462-520T .....................3/16 x 1/2.........................0.39

STAINLESS STEEL CLEVIS PIN18-8 STAINLESS STEEL62-521T .....................3/16 x 5/8.........................1.1162-522T .......................3/16 x 1 ..........................1.1762-523T ......................1/4 x 3/4 .........................1.2562-524T ........................1/4 x 1 ...........................1.4462-525T .......................5/16 x 1 ..........................1.6262-526T ....................5/16 x1 1/2........................1.9262-527T ........................3/8 x 2 ...........................2.37

BRONZE HEX NUTS62-386R ...........................1/4".............................P.O.R.62-387R ..........................5/16" ...........................P.O.R.62-388R ...........................3/8" ...........................P.O.R.62-389R ...........................1/2" ............................P.O.R.62-390R ...........................5/8".............................P.O.R.62-391R ...........................3/4".............................P.O.R.62-499R ...........................7/8.............................P.O.R.62-500R.............................1 ..............................P.O.R.

S.S. WING NUTS18-8 STAINLESS STEEL62-195T ...........................6-32 ..............................0.2062-196T ...........................8-32 ..............................0.2462-197T ..........................10-32 .............................0.2662-198T ...........................1/4...............................0.2962-199T ..........................5/16..............................0.3962-200T ...........................3/8...............................0.6162-202T ...........................1/2...............................1.76

S.S. ACORN CAP NUTS18-8 STAINLESS STEEL62-353T ...........................6-32 ..............................0.2662-354T ...........................8-32 ..............................0.2862-355T ..........................10-32 .............................0.2862-356T ...........................1/4 ..............................0.2462-357T ..........................5/16..............................0.4462-358T ...........................3/8...............................0.4662-698T ...........................1/2...............................1.05

S.S. FLAT WASHERS18-8 STAINLESS STEEL62-203T ............................# 8 ...............................0.0262-204T ...........................# 10 ..............................0.0262-205T ...........................# 12 ..............................0.0362-206T ...........................1/4 ..............................0.0362-207T ..........................5/16..............................0.0462-208T ...........................3/8...............................0.0762-209T ..........................7/16..............................0.1262-210T ...........................1/2...............................0.1662-211T ...........................5/8...............................0.2762-212T ...........................3/4...............................0.49316 STAINLESS STEEL62-482T ...........................1/4 ..............................0.0662-483T ..........................5/16 .............................0.0962-484T ...........................3/8 ..............................0.1162-486T ...........................1/2 ..............................0.2962-487T ...........................5/8...............................0.4862-488T ...........................3/4...............................1.35

S.S. NYLON INSERT LOCKNUTS18-8 STAINLESS STEEL62-185T ...........................6-32 ..............................0.0562-186T ...........................8-32 ..............................0.0662-187T ..........................10-32 .............................0.0762-188T ...........................1/4 ..............................0.0962-189T ..........................5/16..............................0.1062-190T ...........................3/8...............................0.1562-191T ..........................7/16..............................0.2662-192T ...........................1/2...............................0.3962-193T ...........................5/8...............................1.0062-194T ...........................3/4...............................1.26316 STAINLESS STEEL62-473T ...........................1/4...............................0.1262-474T ..........................5/16..............................0.1862-475T ...........................3/8...............................0.2462-477T ...........................1/2...............................0.5562-478T ...........................5/8...............................1.4962-479T ...........................3/4...............................2.47

BRONZE HANGER BOLTSComplete with two nuts.44-1450P......................3/8 x 4 ...........................6.9544-1451P......................3/8 x 5 ...........................8.9544-1453P......................1/2 x 4 .........................13.2544-1454P......................1/2 x 5 .........................14.1544-1455P......................1/2 x 6 .........................15.1044-1456P......................5/8 x 5 .........................19.2544-1457P......................5/8 x 6 .........................19.9544-1458P......................5/8 x 7 .........................20.9544-1459P......................5/8 x 8 .........................22.9544-1461P......................3/4 x 8 .........................32.9044-1462P.....................3/4 x 10 ........................38.9544-1463P.....................7/8 x 10 ........................55.7044-1464P ......................1 x 10..........................69.8044-1465P ......................1 x 12..........................76.40

S.S. LOCK WASHERS18-8 STAINLESS STEEL62-213T ............................# 8 ...............................0.0262-214T ...........................# 10 ..............................0.0262-215T ...........................# 12 ..............................0.0262-216T ...........................1/4 ..............................0.0362-217T ..........................5/16..............................0.0462-218T ...........................3/8...............................0.0762-219T ..........................7/16..............................0.1062-220T ...........................1/2...............................0.1362-221T ...........................5/8...............................0.2162-222T ...........................3/4...............................0.32316 STAINLESS STEEL62-492T ...........................1/4 ..............................0.0462-493T ..........................5/16 .............................0.0862-494T ...........................3/8...............................0.1062-496T ...........................1/2 ..............................0.1862-497T ...........................5/8...............................0.2662-498T ...........................3/4...............................0.59

S.S HEX NUTS18-8 STAINLESS STEEL62-170T ...........................6-32 ..............................0.0362-171T ...........................8-32 ..............................0.0462-172T ..........................10-32 .............................0.0462-173T ..........................12-24 .............................0.0762-174T ...........................1/4...............................0.0662-175T ..........................5/16..............................0.0962-176T ...........................3/8...............................0.1362-177T ..........................7/16..............................0.2362-178T ...........................1/2...............................0.3062-330T ...........................5/8...............................0.5962-331T ...........................3/4...............................0.96316 STAINLESS STEEL62-462T ...........................1/4 ..............................0.1262-463T ..........................5/16..............................0.1462-464T ...........................3/8 ..............................0.1962-466T ...........................1/2 ..............................0.5562-467T ...........................5/8...............................0.9462-468T ...........................3/4...............................1.48


Fa

ste

ne

rsGALVANIZED SHIP SPIKES

Approx.Ord.No. Size # per lb. Price62-395K ............5/16 x 3 ............12 pcs. ........3.60/lb62-396K ............5/16 x 4 ............10 pcs. ........3.60/lb62-408K ............5/16 x 5 ............ 8 pcs. ........3.60/lb

GALVANIZED FLAT WASHERS62-223R ...........................1/4" ..............................0.0362-224R ..........................5/16"..............................0.0462-225R .......................... 3/8" ..............................0.0662-226R ...........................1/2" ..............................0.1362-227R ...........................5/8" ..............................0.2662-228R ...........................3/4" ..............................0.32

GALVANIZED HEX NUTS62-307R ...........................1/4" ..............................0.0262-308R ..........................5/16"..............................0.0462-309R .......................... 3/8" ..............................0.0562-310R ...........................1/2" ..............................0.1162-311R ...........................5/8" ..............................0.2362-312R ...........................3/4" ..............................0.36

GALVANIZED LAG SCREWS62-289R .......................1/4" x 2" ...........................0.1462-374R ....................1/4" x 2 1/2" ........................0.1862-375R .......................1/4" x 3" ...........................0.2062-377R .......................1/4" x 4" ...........................0.2662-378R .......................1/4" x 5" ...........................0.2462-290R ......................5/16" x 2" ..........................0.2462-291R ...................5/16" x 2 1/2" .......................0.2862-292R ......................5/16" x 3" ..........................0.3362-293R ......................5/16" x 4" ..........................0.4262-294R .......................3/8" x 2" ...........................0.3562-295R ....................3/8" x 2 1/2" ........................0.4262-296R .......................3/8" x 3" ...........................0.4862-297R .......................3/8" x 4" ...........................0.6162-298R .......................3/8" x 5" ...........................0.4262-334R .......................3/8" x 6" ...........................0.4962-299R .......................1/2" x 2" ...........................0.3762-300R .......................1/2" x 3" ...........................0.4962-301R .......................1/2" x 4" ...........................0.6362-302R .......................1/2" x 5" ...........................0.7962-303R .......................1/2" x 6" ...........................0.9062-336R .......................1/2" x 8" ...........................1.3362-304R .......................5/8" x 5" ...........................1.2562-305R .......................5/8" x 6" ...........................1.4862-306R .......................5/8" x 8" ...........................2.12

GALVANIZED CARRIAGE BOLTS62-229R .......................1/4" x 2" ...........................0.1162-230R ....................1/4" x 2 1/2" .......................0.1362-231R.......................1/4" x 3" ..........................0.1562-232R ....................1/4" x 3 1/2" .......................0.1762-233R .......................1/4" x 4"...........................0.1962-234R ....................1/4" x 4 1/2" .......................0.2162-235R .......................1/4" x 5"...........................0.2462-236R .......................1/4" x 6"...........................0.3062-239R ......................5/16" x 2"..........................0.1662-240R ...................5/16" x 2 1/2" ......................0.1662-241R ......................5/16" x 3"..........................0.2062-242R ...................5/16" x 3 1/2" ......................0.2362-243R ......................5/16" x 4"..........................0.2562-373R ...................5/16" x 4 1/2" ......................0.2962-244R ......................5/16" x 5" ..........................0.3262-245R ......................5/16" x 6" ..........................0.4062-248R .......................3/8" x 2" ...........................0.2562-249R ....................3/8" x 2 1/2" ........................0.2962-250R .......................3/8" x 3" ...........................0.3362-251R ....................3/8" x 3 1/2" ........................0.3562-252R .......................3/8" x 4" ...........................0.4062-253R ....................3/8" x 4 1/2" ........................0.4662-254R .......................3/8" x 5" ...........................0.5062-255R ....................3/8" x 5 1/2" ........................0.5362-256R .......................3/8" x 6" ...........................0.5762-379R ....................3/8" x 6 1/2" ........................0.6262-257R .......................3/8" x 7" ...........................0.6462-258R .......................3/8" x 8" ...........................0.7262-260R ......................3/8" x 10" ..........................0.9062-262R ......................3/8" x 12" ..........................0.9962-263R ......................3/8" x 14" ..........................1.2962-264R .......................1/2" x 4" ...........................0.7962-265R .......................1/2" x 5" ...........................0.9762-266R .......................1/2" x 6" ...........................1.0862-267R .......................1/2" x 7" ...........................1.2062-268R .......................1/2" x 8" ...........................1.3262-269R .......................1/2" x 9" ...........................1.5762-270R ......................1/2" x 10" ..........................1.7062-272R ......................1/2" x 12" .........................1.8862-273R ......................1/2" x 14 ..........................2.2062-279R .......................5/8" x 6" ...........................1.7562-280R .......................5/8" x 8" ...........................2.28

www.mercersmarine.comHere at Mercers, we are more than just marine. We oer a wide variety of clothing and footwear from someof the industries top name brands, available to our customers on our website. These products are seasonaland change frequently, therefore we are unable to feature them in our catalogue. The site is continuallybeing updated. New products are added on a weekly basis. Our website has Point of Sale Integration, whichmeans; our online pricing will always reect our current pricing.

As you browse our catalogue you will nd many advertisements highlighting the wide selection of clothingand footwear brands not displayed in our catalogue. These items are oered through our website orinstore only.

As stated above, our website is a work in progess. If you have any questions or concerns about orderingfrom our website please contact our Website Manager for assistance.

Shannon OakeWebsite ManagerTel: 709.466.7430Email: [email protected]

Hy

dra

uli

cs

CO

MM

ERC

IAL

FISH

ING

GEA

R


10 HANGING HEAD ASSEMBLYMaximum line pull 390 lb.Maximum line speed 1060 fpm. Complete with castaluminum mounting plate with swivel eye. 6 cu.in.displacement motor, cast bronze hub, painted steel discs,and cast iron splitter. Hydraulic motor fittings included.Shipping weight - 43 lbs.44-564K ..................Parker TBO-100..................990.0044-520K ..............Char-Lynn 101-1003..............930.00

12 HANGING HEAD ASSEMBLYMaximum line pull 950 lb.Maximum line speed 315 fpm. High torque modeldesigned especially for crab fishing and other applicationswhere heavy line pull is needed. Complete with castaluminum mounting plate with swivel eye, 23 cu.in.heavy duty displacement motor, cast bronze hub, paintedsteel discs, and cast iron splitter. Hydraulic motor fittingsincluded. Shipping weight - 51 lbs.44-566K...................Parker TEO-390................1384.00 44-470K ..............Char-Lynn 103-1008............1185.00Maximum line pull 900 lbs.Maximum line speed 320 fpm. Same as above except with23 cu.in. displacement motor. Shipping weight - 48 lbs.44-565K ..................Parker TBO-390................1209.0044-469K ..............Char-Lynn 101-1008............1102.00 Maximum line pull 585 lb.Maximum line speed 630 fpm. Same as above except with11 cu. in. displacement motor. Shipping weight - 44 lbs.44-923K ..................Parker TBO-195................1106.0044-445K ..............Char-Lynn 101-1005............1035.00

TYPICAL HYDRAULIC INSTALLATIONA typical installation employs the simplest of hydrauliccircuits. Minimizing the number and complexity of thecomponents increases the systems reliability anddurability, keeps costs to a minimum, and makes themeasier to install and operate. Power to drive thehydraulic pump most often comes from the vesselsengine through a belt or direct system (with or withoutan electric clutch), but can also be provided by anauxiliary engine or, as in the case of an outboardengine powered or unpowered vessel, a portablehydraulic power unit that combines an engine,hydraulic pump, tank and filter in a single, compactunit.

10 900 HEAD ASSEMBLYMaximum line pull 390lbs., maximum line speed 1060fpm. Complete with 6 cu. in. displacement motor, castiron aluminum mounting plate, cast bronze hub, paintedsteel discs, cast iron splitter, cast bronze rope deflector,and cast aluminum hub cover. Hydraulic motor fittingsincluded. Shipping weight - 32 lbs.44-928K ..................Parker TBO-100..................890.0044-452K ..............Char-Lynn 101-1003 ..............830.00

12 900 HEAD ASSEMBLYMaximum line pull 900lbs., maximum line speed 320fpm. High torque model, used for hauling crab pots indeeper waters. Complete with cast aluminum mountingplate. This model has a 23 cu.in. displacement motor,cast bronze hub, painted steel discs, and a cast ironsplitter. Hydraulic motor fittings included.44-925K ..................Parker TBO-390................1119.0044-926K ..............Char-Lynn 101-1008............1012.00

Maximum line pull 585 lbs., maximum line speed 630fpm. As above except with 12 cu.in. displacement motor.Shipping weight - 43 lbs.44-927K ..................Parker TBO-195................1016.0044-453K ..............Char-Lynn 101-1005 ..............945.00

14 900 HEAD ASSEMBLYMaximum line pull 1500lbs., maximum line speed 390fpm. Complete with 30 cu.in. displacement motor, castaluminum mounting plate, stainless steel hub, paintedsteel discs, cast iron splitter, cast bronze rope deflector,and stainless steel hub cover. Hydraulic motor fittingsincluded. Shipping weight - 76 lbs.44-454K...................Parker TFO-475 ................1765.0044-455K ..............Char-Lynn 104-1434............1600.00

11

9

12

6

10

7

8

2

4

1

3

5

1. Head Assembly2. Work Lines - high pressure3. Control Handle4. Control Handle Connector5 Control Valve6. Hydraulic Fluid Tank7. In-Line Filter8. Return Line - low pressure9. Pump Discharge line - high pressure10. Pump Suction line - low pressure11. Hydraulic Pump12. Pump Mount Bracket


Hy

dra

ul i

cs

CO

MM

ERC

IAL

FISH

ING

GEA

R

15 HANGING HEAD ASSEMBLYExtra heavy duty cast iron discs. Cast bronze hub andmachined grease passage. Hub and motor shaft areprotected by a stainless steel hub cover with greasefitting and neoprene gasket. Also accepts any of themotors currently offered on our 14 haulers. Shippingweight 182 lbs.

Maximum line pull 2525 lbs.Maximum line speed 427 fpm. 28.3 cu. in. 44-1501K.................White 600-470 ................2850.00

14 HANGING HEAD ASSEMBLYMaximum line pull 1500 lb.Maximum line speed 390 fpm. Still the mainstay of theinshore crab fishery. Has stainless steel hub to withstandthe strongest pulls. Complete with cast aluminummounting plate with swivel eye. 30 cu. in. displacementmotor, stainless steel hub, painted steel discs, and castiron splitter. Hydraulic motor fittings included. Shippingweight - 103 lbs.44-567K...................Parker TFO-475 ................1999.0044-446K ..............Char-Lynn 104-1434............1850.0044-447K ...............White 500-470-A31 ............1695.00

17 HANGING HEAD ASSEMBLYMaximum line pull 2500 lb.Maximum line speed 480 fpm. The ultimate whennothing less will do. Handles the deepest and heaviesthauls with ease. Complete with cast aluminummounting plate with swivel eye. 60 cu. in. displacementmotor, cast bronze hub, painted steel discs, and cast ironsplitter. Hydraulic motor fittings included. Shippingweight - 230 lbs.44-448K ..............Char-Lynn 112-1069............4175.00

Maximum line pull 2150 lbs.Maximum line speed 965 fpm. Designed especially foroffshore crab pot hauling. As above except with 30 cu.in. displacement motor. Shipping weight - 220 lbs.44-924K ..............Char-Lynn 112-1068............4095.00

DISC LINERSThe perfect item to protect your hauler headinvestment. Simply install a pair of these between yourhauler discs and replace these liners as they wear, notyour hauler discs. Made from 1/16 thick steel andgalvanized for corrosion resistance, inside surfaces ofliners are scored to avoid line slippage.44-743K .......................12 Liners ...................21.95/pr44-744K .......................14 Liners ...................28.95/pr

REINFORCING DISCA steel disc used on the outside of the plates on a 14crab hauler. Strengthens plates and prevents cracking ofplates around the bolt holes.44-549K ........................14 only ....................84.95 ea.

FAIRLEAD ROLLERSSolid machined aluminum rollers with bronze bushingsand stainless steel shafts.44-449K...........3dia. -10 & 12 old style ............59.9544-950K..............3dia - 12 new style ...............69.9544-450K .................4dia - 14 heads...................82.9544-036K .................5 dia - 15 heads ................145.0044-451K .................5dia - 17 heads ............... 142.00

Hy

dra

uli

cs

CO

MM

ERC

IAL

FISH

ING

GEA

R


1.) Backing Plate2.) Hub3.) Disc Set4.) Disc Shims5.) Hub Cover Gasket6.) Hub Cover7.) Disc Bolts8.) Splitter Shim9.) Splitter10.) Splitter Bolts11.) Rope Deflector Assembly12.) Motor Mount Bolts13.) Hydraulic Motor14.) Motor Fittings

Head Assembly SizeItem # PriceItem # Price Item # Price Item # Price Item # Price

10 12 14 15 17

90 Mounting Plate, aluminum

Hanging style Mounting Plate

Replacement eyebolt kit

Hub, cast bronze

Hub, stainless steel

Hub washer, stainless steel

Discs, painted steel, set of 2

Discs, stainless steel, set of 2

Discs, cast iron, set of 2

Reinforcing disc, each

Disc shim 1/32 thick, each

Disc shim 1/16 thick, each

Hub cover gasket

Hub cover, stainless steel

Hub cover, aluminum

Disc bolts, each

Disc bolt washers,hanging heads

Splitter shim 1/32 thick, each

Splitter shim 1/16 thick, each

Splitter, cast iron

90 Splitter bolts, each

Hanging Splitter bolts, each

Hanging Splitter bolt nuts, ea.

Rope deflector assembly

Motor mount bolts, each

Motor mount bolt nuts, each

Hydraulic motor

Hydraulic motor fittings

1

2

3

4

5

9

6

7

8

11

10

13

14

12

44-301K 321.0044-300K 220.00

44-653K 375.00

--------------------------

44-323K 169.00

--------------------------

--------------------------

44-303K 56.00

44-579K 77.00

--------------------------

--------------------------

44-355K 1.19

44-330K 1.75

44-388K 2.60

--------------------------

44-362K 30.00

62-059T 0.29

--------------------------

44-396K 0.69

44-333K 0.85

44-319K 32.00

62-055T 0.43

62-056T 0.51

62-175T 0.09

44-329K 55.00

62-559T 0.49

--------------------------

See Page 15 for Hydraulic Motors44-234P 5.30

44-359K 425.00

44-1079K 44.95

44-324K 196.00

44-327K 229.00

--------------------------

44-314M 64.95

44-317K 99.00

--------------------------

--------------------------

44-356K 1.39

44-331K 1.99

44-389K 2.60

44-335K 14.95

--------------------------

62-068T 0.46

62-219T 0 .10

44-396K 0.69

44-333K 0.85

44-320K 29.95

62-560T 0.69

62-381T 0.69

62-175T 0.09

44-358K 59.95

62-559T 0.49

----------------------------

44-234P 5.30

44-360K 760.00

44-714K 59.95

--------------------------

44-328K 225.00

--------------------------

44-315M 138.00

44-318K 369.00

--------------------------

44-549K 84.95

44-356K 1.39

44-331K 1.99

44-389K 2.60

44-335K 14.95

--------------------------

62-566T 0.95

62-220T 0.12

44-396K 0.69

44-333K 0.85

44-321K 34.95

62-056T 0.51

62-057T 0.63

62-175T 0.09

44-358K 59.95

62-383T 2.20

62-178T 0.30

44-241P 5.40

44-1201K 875.00

44-714K 59.95

44-1203K 540.00

--------------------------

44-1210K 14.95

--------------------------

--------------------------

44-1202K 489.00

--------------------------

--------------------------

44-354K 5.30

44-390K 3.50

44-1206K 29.95

--------------------------

62-078T 1.19

--------------------------

44-397K 0.89

44-398K 1.39

44-1204K 59.95

---------------------------

62-730T 0.65

62-175T 0.09

--------------------------

62-383T 2.20

62-178T 0.30

44-249P 9.00

44-302K 436.00 -------------------------- --------------------------

44-361K 1195.00

--------------------------

44-326K 705.00

--------------------------

44-357K 14.95

44-316K 495.00

--------------------------

--------------------------

--------------------------

--------------------------

44-332K 5.30

44-390K 3.50

44-336K 29.95

--------------------------

62-078T 1.19

--------------------------

--------------------------

44-334K 1.75

44-322K 69.95

-------------------------

62-066T 1.14

62-176T 0.12

-------------------------

62-384T 3.99

62-558T 1.50

44-243P 9.10

Hauler Head Assembly Replacement Parts

Hauler Head AssemblyReplacement PartsPlease use the chart above to select thecorrect part for your hauler head assembly.This diagram is intended as a guide only.Multiple items are available in variousdifferent materials. Make sure you choosethe correct part number you need for thematerial you require. The quantitiesrequired for some parts such as shims andbolts vary for different head assemblies.

12

3

3

7

98

11

10

1213 14

6

444

5


Hy

dra

ul i

cs

CO

MM

ERC

IAL

FISH

ING

GEA

R

HYDRAULIC POWER PACKSA lightweight system powered by the renowned Honda 4-stroke gasoline engine. Proven reliability and endurance in the marine industry. Systems include Honda engine,Hydraulic pump/tank and return line filter. Units are completely assembled. Supplied with either stainless steel or marine aluminum tank and mount.

HONDA GAS ENGINES5.5 HP with 6:1 reduction (hauling lobster pots)44-458A ..............6:1 reduction, GX160................P.O.R.44-088K .....Capstan for Honda engine above.....109.95

Straight drive (no reduction)44-540A ....................5.5 HP, GX160......................P.O.R.44-377A .....................9 HP, GX270 .......................P.O.R.44-187A ....................13 HP, GX390 ......................P.O.R.

DIRECT DRIVE MARINE WINCHESThese high quality direct drive marine winches are complete with a wet disc fail-safe brake system and overcenter valves. These are commonly used in the marine industry forcargo loading/unloading and for stabilizer/fish lowering and raising. Please note Model # WH2F has a larger drum to handle stabilizer chain and cable. All winches with thisbrake system require a motor spool control valve for proper operation.

HONDA 13 HP 11.3 GPMAluminum hydraulic tank13 HP Honda GX390 engine, 11.3 gpm hydraulic gearpump.8 gallon hydraulic tank. Approx. size: 23W x 26L x25H. Approx. dry weight: 120 lbs.44-186K .........Recoil start, engine oil alert ......2399.00

HONDA 5.5 HP 5 GPM Stainless steel hydraulic tank5.5 HP Honda GX160 engine, 5 gpm hydraulic gearpump. 3 gallon hydraulic tank.Approx. size: 20H x 19L x 16W.Approx. dry weight: 55lbs.44-501K...........................................................1399.00

HONDA 9 HP 8 GPMStainless steel hydraulic tank9 HP Honda GX 270 engine, 8 gpm hydraulic gear pump.5 gallon hydraulic tank.Approx. size: 23H x 21L x 18W.Approx. dry weight: 85 lbs.44-379K...........................................................1799.00

Line Pull @ 1600PSI Line Speed @ 12GPM Drum Capacity Drum CapacityOrd. No. Model # Bare Drum Bare Drum 3/8 Wire Rope 1/2 Wire Rope Price44-724A ..........................WH2P (Standard Winch)..................2500 lbs...................................120FPM ............................150 ft...................................110 ft............................... P.O.R.44-726A ..........................WH2F (Fish Winch)..........................2500 lbs ...................................120FPM ............................390 ft...................................290 ft............................... P.O.R.44-728A ..........................WH4P (Cargo Winch) ......................3800 lbs (@2000 PSI)................90FPM..............................230 ft...................................160 ft............................... P.O.R.

Hy

dra

uli

cs

CO

MM

ERC

IAL

FISH

ING

GEA

R


ALUMINUM GILLNET ROLLER44-533A .......................20 drum .........................P.O.R.

STEEL HUBSWire Head Gurdy44-548J .........................1 Shaft........................109.00Heavy Duty Wire Head Gurdy44-582J ......................1 1/4 Shaft.....................119.00

STEEL BASE PLATESWire Head Gurdy44-946J .........................1 Shaft........................169.00Heavy Duty Wire Head Gurdy44-947J ......................1 1/4 Shaft.....................179.00

STAINLESS WIRE HEADSHeavy duty s.s. wire heads built tough to withholdtodays requirements.Reg. Wire Head 1744-544A .............................................................. P.O.R.Deep Water Wire Head 2244-545A .............................................................. P.O.R. Displ.

Ord. No. Cu.in. Type Line Pull Price44-976A..........................24 cu.in. ..........................Standard Duty ......................1000lbs ..................................P.O.R.44-788A..........................24 cu.in. ..........................Heavy Duty ..........................1200lbs ..................................P.O.R.44-643A..........................30 cu.in. ..........................Extra Heavy Duty ..................1460lbs ..................................P.O.R.

WIRE HEAD GURDYThis stainless steel wire head gurdy comes complete with mounting plate, 17 wire head, hub, and hydraulic motor.Thousands of units sold. This gurdy comes in a number of set-ups ranging from 18 speed boats up to 40 longliners.See below specs for your gurdy requirements.

DEEP WATER WIRE HEAD GURDYThis Deep Water gurdy comes complete with 22 stainless steel wire head, mounting bracket, hub, hydraulic motor& planetary drive. They are used for larger vessels fishing deep water. Please call for more information.Ord. No. Type Line Pull Price44-790A..................................................400-800 fath ..........................3000lbs ......................................................P.O.R.


Hy

dra

ul i

cs

CO

MM

ERC

IAL

FISH

ING

GEA

RCHAR-LYNN HYDRAULIC MOTORS

SEAL KITS44-466K ..................................................................Char-Lynn 101-1001-007 to 101-1008-007 old style seal kit (model 60023)........................................................................34.9544-467K..................................................................................Char-Lynn 104-1440 & 104-1434 seal kit (model 61258) ......................................................................................56.9544-468K ........................................................Char-Lynn 101-1001-009/010 to 101-1008-008/010 current style seal kit (model 60540) ............................................................42.9544-929K ..........................................................................................Char-Lynn 103 series seal kit (model 60539) ................................................................................................42.95

SEAL KITS44-933K......................................................................................................TB and TE series motors.............................................................................................................38.9544-974K ...........................................................................................................TF series motors ..................................................................................................................57.95

PARKER HYDRAULIC MOTORS Displ. Max. Max. Max. Max. Port Shaft Side

Order No. Model cu. in./rev. psi gpm rpm torque size size load(lbs) Price44-967K ..................TB0-100 ..................6.0 ..................1800 ..............12................454 ................1411..................1/2NPT ......................1....................1600 ................319.0044-968K ..................TB0-195 ..................11.9 ................1800 ..............12................230 ................3011..................1/2NPT ......................1....................1600 ................362.0044-969K ..................TB0-230 ..................13.9 ................1500 ..............12................197 ................2797..................1/2NPT ......................1....................1600 ................390.0044-970K ..................TB0-295 ..................17.9 ................1400 ..............12................153 ................3391..................1/2NPT ......................1....................1600 ................399.0044-971K ..................TB0-390 ..................24.0 ................1200 ..............12................114 ................3792..................1/2NPT ......................1....................1600 ................465.0044-930K ..................TE0-295....................17.9 ................1550 ..............15................192 ................3784..................1/2NPT ......................1....................2600 ................509.0044-931K ..................TE0-390....................24.0 ................1250 ..............15................143 ................3935..................1/2NPT ......................1....................2600 ................645.0044-618K ..................TF0-405....................24.7 ................1850 ..............20................185 ................6393..................5/8ORB......................1 1/4 ............3200 ................829.0044-619K ..................TF0-475....................29.1 ................1645 ..............20................156 ................6790..................5/8ORB......................1 1/4 ............3200 ................850.0044-614K ..................TGO-475 ..................29.1 ................2000 ..............20................157 ................8445..................5/8ORB......................1 1/4 ............ N/A ..............1230.0044-615K ..................TGO-785 ..................48.0 ................1500 ..............20................95 ..................10108................5/8ORB......................1 1/4 ............ N/A ................1450.0044-616K ..................TGO-960 ..................58.5 ................1500 ..............20................78 ..................12262................5/8ORB......................1 1/4 ............ N/A ................1720.00

Displ. Max. Max. Max. Max. Port Shaft SideOrder No. Model cu. in./rev. psi gpm rpm torque size size load(lbs) Price44-306K ..................101-1003................5.9 ................1800..................15 ..............578 ..................1368 ..................1/2NPT ......................1......................1400 ................259.0044-307K ..................101-1005 ..............11.3 ................1600..................15 ..............302 ..................2337 ..................1/2NPT ......................1......................1400 ................291.0044-308K ..................101-1006 ..............14.1 ................1450..................15 ..............243 ..................2650 ..................1/2NPT ......................1......................1400 ................309.0044-498K ..................101-1007 ..............17.9 ................1350..................15 ..............192 ..................3110 ..................1/2NPT ......................1......................1400 ................326.0044-309K ..................101-1008 ..............22.6 ................1250..................15 ..............152 ..................3604 ..................1/2NPT ......................1......................1400 ................359.0044-473K ..................103-1005 ..............11.9 ................2000..................15 ..............281 ..................3178 ..................1/2NPT ......................1......................1400 ................382.0044-474K ..................103-1006 ..............14.9 ................1850..................15 ..............226 ..................3633 ..................1/2NPT ......................1......................1400 ................399.0044-475K ..................103-1008 ..............22.6 ................1300..................15 ..............150 ..................3811 ..................1/2NPT ......................1......................1400 ................446.0044-310K ..................104-1440 ..............18.7 ................3000..................20 ..............246 ..................6750 ..................5/8ORB ..................1 1/4 ..................4700 ................580.0044-340K ..................104-1434 ................30..................2000..................20 ..............149.................. 7470 ..................5/8ORB ..................1 1/4 ..................4700 ................685.0044-476K ..................112-1068 ..............29.9 ................3000..................40 ..............307 ................12800....................1 ORB ....................1 1/2 ..................5000 ..............1320.0044-477K ..................112-1069 ................60..................2000..................40 ..............153 ................14920....................1 ORB ....................1 1/2 ..................7100 ..............1520.00

Hy

dra

uli

cs

CO

MM

ERC

IAL

FISH

ING

GEA

R


HYDRAULIC SELECTOR VALVES2 position single, 3/4 ports, max.pressure 3600 psi, 24 GPM.44-435K.....................3/4 Single ...................... 89.002 position single, 1 ports, max.pressure 3600 psi, 48 GPM.44-436K ...................... 1 Single.......................115.002 position double, 3/4 ports, maxpressure 3600 psi, 24 GPM.44-437K ....................3/4 Double.....................189.00

FLOW CONTROL VALVE Maximum flow rate 30 GPM. Maximum pressure 3000psi. Output flow adjustable from 1 - 100%. Bypass flowcan be used to power another circuit or returned to tank.Outlet flows are pressure compensated ensuring smoothcontrolled flow regardless of pressure changes. 3/4ports.44-125K.............................................................125.00

GALTECH CONTROL VALVE (Q-75 SERIES)This marine grade valve has a maximun flow rate of 22gpm, with a maximum pressure rating of 3625 psi. Themain line uses a #10 ORB in, and a #12 ORB out portsize, along with #10 ORB work ports. Valve is available in3 position detent, 3 position spring center, or 3 positionspring center motor spool depending on yourapplication. All models are supplied with handle.44-1520K ...............3 position detent.................269.0044-1521K ...............3 position spring.................225.0044-1522K .....3 position spring motor spool .......225.0044-1533K.....................Detent kit ........................47.95

GALTECH CONTROL VALVE (Q-75 SERIES)This marine grade valve has a maximun flow rate of 22gpm, with a maximum pressure rating of 3625 psi. Themain line uses a #10 ORB in, and a #12 ORB out portsize, along with #10 ORB work ports. The valve isstandard with a double 3 position spring centeredconfiguration. However can be modified to detent withthe purchase of a detent kit. Supplied complete withhandles.44-1530K .......2 x 3 position spring center.........349.0044-1533K.....................Detent kit ........................47.95

GALTECH CONTROL VALVE (Q-95 SERIES)This rotary spool valve has a maximum flow rate of 32gpm and a maximum pressure rating of 3000psi. Rotaryspool offers great speed control. The main line has a #12ORB in port with a #12 ORB out. The work lines are #10ORB. Valve comes complete with handle.44-1540K ..................Rotary Spool ....................409.00

GALTECH CONTROL VALVE (Q-45 SERIES)This rotary spool valve has a maximum flow rate of 12gpm and a maximum pressure rating of 3000psi. Greatfor smaller hydraulic system needs. Rotary spool offersgreat speed control. The main line has a #8 ORB in portwith a #10 ORB out. The work lines are #8 ORB. Valvecomes complete with handle.44-1538K ..................Rotary Spool ....................299.00

GALTECH CONTROL VALVE (Q-35 SERIES)This 3 position valve has a maximum flow rate of 12gpm and a maximum pressure rating of 3000psi. Greatfor smaller hydraulic system needs. The main line has a#8 ORB in port with a #8 ORB out. The work lines are#8 ORB. Valve comes complete with handle.44-1518K ...............3 Position Detent ................208.0044-1519K..........3 Position Spring Centre ...........175.00

CROSS VALVESThis valve allows you to use the functions of a regularcontrol value, as well as a flow control valve, all in oneunit. Maximum PSI 2500, 25 gpm, 3/4 Inlet & Outlet,with 1/2 work ports44-126M .................3 Position Detent .................375.0044-127M..................Spring Centering..................359.00Replacement Parts44-160M .......3 Position Detent Kit 1V0294..........34.9544-161M.............Spare Handle 1V17O3 ...............17.5044-162M............Handle Bracket 4Z4306 ................5.4044-163M ............Handle Pin Kit 1V1701.................6.1544-164M .......Spring Centering Kit 1V1225 ..........21.9544-313M ...........Valve End Cap 1A0294P................4.9544-376M ...............Flow Control Knob....................9.5044-521M .................Seal Kit 2V0020....................31.9544-522M .............Power Beyond Sleeve ...............16.9544-523M ...........Allen Head Screw (Brk.)................1.0044-524M .........Allen Head Screw(Detent) ..............1.50


Hy

dra

ul i

cs

CO

MM

ERC

IAL

FISH

ING

GEA

RADJUSTABLE ALUMINUM PUMP BRACKET44-339K.............................................................164.00

ADJUSTABLE STEEL PUMP BRACKET44-628K.............................................................115.00

HYDRAULIC GEAR PUMP29 gpm. @ 1200 rpm, maximum pressure 2500 psi. 11/4 splined shaft, 1 1/4 orb. inlet & outlet. Pumpoperates in either direction.44-942M.........................P5000 .........................579.00

HYDRAULIC GEAR PUMP25 gpm. @ 1200 rpm, maximum pressure 3500 psi. 1keyed shaft. This pump is commonly referred to as thefish pump and bolts directly to a 200 or 250 ft.lb.clutch, by using a SAE A 6-bolt round flange. Pumpoperates in either direction.44-606K..........................P3000 .........................439.00 Model D14

5.0 gpm @ 3600 rpm, max. psi 2500. 5/8 ORB inlet 1/2 ORB outlet.Shaft size 1/2. 4-bolt mounting. Clockwise rotation.44-573K.............................................................189.00

HYDRAULIC GEAR PUMPSAn exceptionally compact and lightweight pump fortheir capacity. Terrific for many low flow applicationssuch as hydraulically driven washdown and waterpumps and portable hydraulic power units. Simple,efficient pressure loaded design - few moving parts.Highly tolerant to fluid contamination and extremelyreliable under cold weather operation.

ALUMINUM PUMP BRACKET44-124K ....................for TB Pumps......................54.9544-123K ....................for TC Pumps......................54.95

Model D227.9 gpm @ 3600 rpm, max. psi 2500. 5/8 ORB inlet 1/2 ORB outlet.Shaft size 1/2. SAE-A 2-bolt mounting. Clockwiserotation.44-574K.............................................................189.00

GRESEN HYDRAULIC VANE PUMPS GPM @ ShaftOrd. No. Mod. Rot. Max. PSI 1200 rpm Inlet Outlet Size Price44-114K ........TB-12..........cw ............1500 ............11.0 ............1NPT ..................3/4NPT ............3/4 ..........475.0044-115K ........TB-12..........ccw ..........1500 ............11.0 ............1NPT ..................3/4NPT ............3/4 ..........475.0044-116K ........TC-24..........cw ............1500 ............23.4 ............1 1/4NPT ............1NPT ................1..............569.0044-117K ........TC-24..........ccw ..........1500 ............23.4 ............1 1/4NPT ............1NPT ................1..............569.00

Hy

dra

uli

cs

CO

MM

ERC

IAL

FISH

ING

GEA

R


44-123

44-939

44-940

44-16844-165

MOUNTING BRACKETSFor 450 & 1000 Ft. Lbs. Clutches44-940K....................For B mount ...................365.0044-939K ....................For C mount ...................339.00

DRIVELINES Fits both Ogura and Pitts clutches.Model 128044-169K .................. fits 250 Ft. Lbs...................289.00

Model 141044-941K.............fits 450 & 1000 Ft. Lbs. ............319.00

250 FT. LBS. CLUTCHESThe OGURA clutch series offers both reliability andaffordability. The new spring design makes this clutch bi-directional and can be converted from 1 bore to 3/4bore, 7/8 keyed or splined drive by adding an insert. The1 bore is double keyed for a quick fix in a damagedkeyway situation.Following the design of our extremely popular andreliable 250 lbs. TC mount clutch, Mercers Marineintroduces the same great clutch in a B mountconfiguration. You can now easily bolt the clutch to anyB mount pump and bracket with 2 bolts for a verystrong and quick installation. All fit standard 1 keyedshaft.Belt Driven Model44-740K .................TC Mount (12V) ................985.0044-1115K ...............TC Mount (24V) ..............1025.00Direct Drive Model44-754K .................TC Mount (12V) ................931.0044-166K .................TC Mount (24V) ................975.0044-1124K ...............B Mount (12V) .................995.0044-1469K ...............B Mount (24V) ...............1040.00

450 FT. LBS. CLUTCHESThe OGURA 450 and 1000 Ft. Lbs. clutches have all thesame advantages as the 250 Ft. lbs. clutch with theexception that it requires an insert (see below) toconvert the 1 3/4 bore to your pump specifications,making it one the most versatile clutches in the industry.All 450 & 1000 Ft. Lbs. clutches are direct drive.450 Ft. Lbs. models44-1116K .........................12V.........................1795.0044-1117K .........................24V.........................1850.00

PITTS BELT DRIVE ELECTRIC CLUTCHModel H24V90 - 90 ft.lb.Static torque rating of 90 ft. lbs. 6 dia., 2 groove pulleyfor 1/2 v-belts. 5000 rpm max., 4 amp draw. Designedto fit Gresen TB pumps.

12v. clutch for 3/4 keyed shaft & A 2 bolt stylepump mount44-128K.........................#13233 ........................745.00

CONVERSION INSERTS FOR 250 FT. LBS.CLUTCH44-410K .............1 to 3/4 keyed insert...............75.0044-411K ............1 to 7/8 splined insert..............89.0044-412K .............1 to 7/8 keyed insert...............74.00

CONVERSION INSERTS FOR 450 & 1000CLUTCHES450 Ft. Lbs. Clutch44-400K .....................7/8 Splined ....................109.0044-401K........................1 Keyed .........................59.0044-402K ..........1 Keyed (Permco pumps) ............99.0044-403K ...................1 1/4 Splined ...................114.0044-404K.....................1 1/4 Keyed ......................59.0044-405K .............1 1/4 Keyed (Permco)...............59.00

MOUNTING BRACKETSFor 90 Ft. Lbs. Clutch TB mount.44-165K ...............................................................79.00

For 200/250 Lbs. Clutch TC & B mount direct drive.44-168K ...............................................................79.00

For 200/250 Lbs. Clutch TC mount belt drive.44-123K ...............................................................54.95


Hy

dra

ul i

cs

CO

MM

ERC

IAL

FISH

ING

GEA

R

HYDRAULIC OILAW-32. 20L44-535J................................................................P.O.R.

TRANSMISSION OIL COOLER2 Diameter, 12 body length, 15 overall. All copper andbrass construction. 1/2 NPT oil nuts.44-562M ...............1 hose x 1/2 NPT ...............129.9544-563M ............1 1/4 hose x 1/2 NPT ............129.95

HYDRAULIC OIL COOLER (HIGH PRESSURE)Constructed of high quality brass and copper. 3 dia.body x 12 body length. Rated up to 375 psi. 1 NPT oilhose fittings, 1 1/2 water hose fittings. Simply install ona hydraulic return line and to suitable water supply.44-1068M .................High pressure ...................419.00

HYDRAULIC TANKSHeavy duty construction, complete with1 1/4 suction & return ports. Complete with breathercap and 3/8 drain plug.17L x 5W x 17H44-337K .............Stainless steel, 6 gal...............409.0020L x 8 1/2W x 20H44-338K .............Stainless steel, 12 gal..............429.0022 1/4L x 12 1/2W x 21 1/4H44-713K ............Aluminum tank, 24 gal.............529.00

Replacement breather cap44-594K ...............................................................22.95

HYDRAULIC IN-LINE FILTERSModel FSP1 - 15 gpm, 3/4 ports,10 micron element.44-347K ..................Complete Filter ....................29.9544-348K ....................Element Only......................10.95Model FSP2 - 45 gpm, 1 1/4 ports,10 micron element.44-349K ..................Complete Filter ....................54.9544-350K ....................Element Only......................21.95

HYDRAULIC RETURN LINEMulti purpose hose used for oil return.38-668R .....................5/8 250 PSI ...................1.29/ft.38-669R .....................3/4 250 PSI ...................1.39/ft.38-670R.......................1 200 PSI .....................2.09/ft.38-671R ...................1 1/4 200 PSI..................3.65/ft.38-672R ...................1 1/2 200 PSI..................4.20/ft. 38-673R.......................2 200 PSI .....................5.75/ft.

HIGH PRESSURE HYDRAULIC HOSE44-502P ....................1/4 5000 PSI ..................1.89/ft.44-363P ....................3/8 4000 PSI ..................2.19/ft.44-170P ....................1/2 3500 PSI .................2.25/ft.44-171P ....................3/4 2250 PSI ..................3.89/ft.44-172P......................1 2000 PSI ....................5.39/ft.

Hy

dra

uli

cs

CO

MM

ERC

IAL

FISH

ING

GEA

R


60-TB ADAPTOR SWIVELSMale ORB. to 450 NSPM swivel female.44-366P ........................... 6-6 ..............................5.0444-248P ........................... 8-8 ..............................7.7244-249P .......................... 10-8 ..............................9.0444-250P ..........................10-12 ...........................13.7044-251P ..........................12-12 ...........................13.9844-914P ..........................16-16 ...........................17.62

60-UB ADAPTOR SWIVELSMale ORB. to 900 NPSM swivel female.44-298P ........................... 6-6 ..............................5.8044-244P ........................... 8-8 ..............................6.5244-245P .......................... 10-8 ..............................6.6644-246P ..........................10-12 ...........................12.2044-247P ..........................12-12 ...........................11.9044-915P ..........................16-16 ...........................18.24

60-SB ADAPTOR SWIVELSMale ORB to NSPM. Swivel female.44-293P ........................... 6-6 ..............................2.7644-238P ........................... 8-8 ..............................3.4644-239P .......................... 8-12 ..............................6.3044-240P ...........................10-8 ..............................4.5644-241P ..........................10-12 .............................5.4044-242P ..........................12-12 .............................9.9844-243P ..........................16-16 .............................9.10

HYDRAULIC FITTINGS

60-TA SERIES ADAPTOR SWIVELSNPTF rigid male to NPSM swivel female.44-367P ..............3/8NPT x 3/8NPSM .................3.7044-234P ..............1/2NPT x 1/2NPSM..................5.3244-886P ..............1/2NPT x 3/4NPSM ...............16.6044-235P ..............3/4NPT x 1/2NPSM................15.5644-236P ..............3/4NPT x 3/4NPSM..................7.1644-237P .................1NPT x 1 NPSM...................11.58

HY SERIES CRIMP FITTINGFJ90T Style, swivel, female 370.44-866P .................3/8H x 3/8 tube ..................11.5644-867P .................1/2H x 1/2 tube ..................12.6644-868P.................1/2H x 5/8 tube .................16.8444-869P .................3/4H x 3/4 tube ..................23.4244-870P ....................1H x 1 tube......................35.40

60-UA SERIES ADAPTOR SWIVELSNPTF male to NPSM swivel female.44-292P ..............3/8NPT x 3/8NPSM .................3.7444-229P ..............1/2NPT x 1/2NPSM..................5.6044-230P ..............1/2NPT x 3/4NPSM .................8.1244-231P ..............3/4NPT x 1/2NPSM..................8.4044-232P ..............3/4NPT x 3/4NPSM..................8.7644-233P .................1NPT x 1 NPSM...................12.20

60-SA SERIES ADAPTOR SWIVELSNPTF male to NPSM swivel female.44-880P ..............1/4NPT x 1/4NPSM .................2.2844-881P ..............1/4NPT x 3/8NPSM..................2.6644-882P ..............3/8NPT x 1/4NPSM .................2.4044-294P ..............3/8NPT x 3/8NPSM..................2.7644-883P ..............3/8NPT x 1/2NPSM..................3.1244-884P ..............1/2NPT x 3/8NPSM..................3.6044-224P ..............1/2NPT x 1/2NPSM..................2.6844-225P ..............1/2NPT x 3/4NPSM..................4.7644-226P ..............3/4NPT x 1/2NPSM..................4.7644-227P ..............3/4NPT x 3/4NPSM..................5.5844-885P ................1NPT x 3/4NPSM ...................9.4044-228P .................1NPT x 1NPSM .....................6.80

HY SERIES CRIMP FITTINGFJ45T style, swivel female 370 .44-860P .................3/8H x 3/8 tube ..................11.2044-861P .................1/2H x 1/2 tube ..................13.2044-862P.................1/2H x 5/8 tube .................17.6044-863P .................3/4H x 3/4 tube ..................22.1044-864P ....................1H x 1 tube......................30.92

HY SERIES CRIMP FITTINGHY series FJ style, swivel female 370.44-1093P...............1/4H x 1/4 tube ....................4.4044-873P.................3/8H x 1/4 tube ...................4.8044-296P .................3/8H x 3/8 tube ....................4.8644-874P.................1/2H x 3/8 tube ...................7.8044-181P .................1/2H x 1/2 tube ....................6.3244-875P .................1/2H x 5/8 tube ....................6.5044-876P .................1/2H x 3/4 tube ..................11.9044-877P .................3/4H x 1/2 tube ..................18.6244-878P .................3/4H x 5/8 tube ..................19.2444-182P .................3/4H x 3/4 tube ..................10.5044-183P ....................1H x 1 tube......................15.56

HY SERIES CRIMP FITTINGSMP style, male NPTF.44-1094P ...............1/4H x 1/4 NPT.....................3.5444-871P .................3/8H x 1/4 NPT ....................3.8444-295P .................3/8H x 3/8 NPT.....................4.1044-178P .................1/2H x 1/2 NPT ....................4.6044-872P .................1/2H x 3/4 NPT.....................6.2844-179P .................3/4H x 3/4 NPT.....................7.8044-180P.....................1H x 1 NPT ......................11.90

QUICK DISCONNECT COUPLINGSAllows for quick & easy connect & disconnect ofhydraulic lines. Great for changing haulers to winches,etc. and continue to use the same control valve.44-1365P ......................1/4 Set..........................19.9544-577P ........................3/8 Set..........................21.9544-188P ........................1/2 Set..........................21.9544-189P ........................3/4 Set..........................38.95


Hy

dra

ul i

cs

CO

MM

ERC

IAL

FISH

ING

GEA

R

25-VJ ADAPTORSNPTF female pipe tee.44-889P .....................3 x 3/8 NPT ........................5.3

mercer's marine & outdoor 2011-2012 product catalogue

Documents

garmin way

com2010 garmin

credit card authorization

credit card number aswell

manufacturers website

new website

manufacturers literature

date ofpurchase