metabox quick start - drawer depot · metabox: steps for frame cabinets 7. measure the opening this...
TRANSCRIPT
The ultimate hardware system
3053.01.03 © 2003 Printed in USA
Julius Blum, Inc.7733 Old Plank Rd.Stanley, NC 28164toll free 800-438-6788local 704-827-1345fax 704-827-0799internet www.blum.com
More Information is available on these Blum products:
• Blum Angled hinge program
• BLUMOTION soft closing system
• COMPACT concealed hinges for frame cabinets
• Concealed hinges: CLIP top, CLIP and MODUL
• Machines and assembly aids
• METABOX drawer system
• ORGA-LINE drawer dividing system
• POCKET DOOR hardware
• STANDARD drawer runners
• SOLO concealed runners
• TANDEM concealed runners
• TANDEMBOX drawer system
METABOX quick startThe fastest way to build a drawer
A complete drawer system that is fast and easy
With the available accessories for METABOX, not only is the system easy to build, the pos-sibilities are endless
Depth
Width
Hei
ght
Width
Depth
Hei
ght
Drawer length
3/8"
Inside opening width minus 1- 1/4"
Ø 3/16"
1-7 / 16
"1-
1 /4"1-
1 /4"
Botto
m L
engt
h
Front edge
13/ 1
6"1-
1 / 4"
3/8"
Ø 3/16"
Inside opening width minus 1-1/4"
Hei
ght
Side
Bottom
21/2"forM, K& H
11/4"for
N
7 /16
"
1/2"
Run
ner
Pos
itio
n
1/4"
Chartmin.
SocketPosition
FrontFrame
2-1/8"3-3/8" 4-5/8" 5-7/8"NM
KH
Blumassembly
devices makemarking and drilling simple.
Inch
Metric
Drill Ø3/8"x 1/2" deep for brackets with dowels
Pre-drill holes in back if using system screws
Bottom overlay
Drillinglocation
3
1
21.
2.
3.
4.
5.
6.
METABOX: Steps for frame cabinets
7.
Measure the opening
This will help you in determiningwhich METABOX drawer will work best for the cabinet opening
Determine which METABOXdrawer height to use
Choose between the four heights that are offered within the METABOX system
Min. opening height
Available heightsN M K H
3-1/16" Yes No No No4-5/16" Yes Yes No No5-9/16" Yes Yes Yes No6-7/8" Yes Yes Yes Yes
Determine which METABOXdrawer length fits the opening
Choose the correct runnerlength to best fit the insidedepth of the cabinet
HeightsAvailable lengths
11" 14" 16" 18" 20" 22"N No Yes Yes Yes Yes YesM Yes Yes Yes Yes Yes YesK No Yes Yes Yes Yes YesH No Yes Yes Yes Yes Yes
Insidedepth range
11-5/8"to
13-3/8"
14-1/16"to
16-1/2"
16"to
18-7/16"
18-13/16"to
20-1/4"
19-15/16"to
22-3/8"
21-15/16"to
24-3/8"
Cut the bottom and back components
No matter what the material or the size of the cabinets, components can be cut and drilled quickly for easy assembly(minimum 13mm material)
Drawer bottom lengthRunner length Bottom length
22" 21-9/16"20" 19-5/8"18" 17-5/8"16" 15-11/16"14" 13-11/1611" 10-9/16"
Drawer back heightHeights 1/2" bottom 5/8" bottom 3/4" bottom
N 1-5/8" 1-9/16" 1-7/16"M 2-15/16" 2-13/16" 2-11/16"K 4-3/16" 4-1/16" 3-15/16"H 5-7/16" 5-5/16" 5-3/16"
Determine front fixing bracket locations
Use the tables below to easily locate the center of the bottom fixing point
Sideoverlay
Screw ordrillinglocation
1/2" 13/16"9/16" 7/8"5/8" 15/16"11/16" 1"3/4" 1-1/16"
Bottomoverlay
Screw or drilling location
N and M K H1/2" 1" 2-5/16" 3-9/16"9/16" 1-1/16" 2-3/8" 3-5/8"5/8" 1-3/16" 2-7/16" 3-11/16"11/16" 1-1/4" 2-1/2" 3-3/4"3/4" 1-5/16" 2-9/16" 3-13/16"
Assemble the drawer
Assembly is made easy with theMETABOX C15 drawer system
1 - Place drawer bottom on pins2 - Attach drawer back with screws3 - Install front fixing brackets and attach front to drawer sides
Mount the cabinet profiles
Attach the cabinet profiles and rear mount sockets to the cabinet
HeightsRunner
mounting positionSocket
mounting positionN 2-5/8" 1-3/8"M 3-15/16" 2-11/16"K 5-3/16" 3-15/16"H 6-7/16" 5-3/16"
Install the drawer
Now that the drawer is built and the cabinet profiles are in place, the drawer can be inserted. Final side and height adjustments can be made via the front fixing brackets.
Dimensions in Inches These drilling locations are directly related to the profile locations in step 7
Fast, easy and accurate
Building a drawer has never been
this simple
No joinery, glue or clamping required
Drawer front at-tachment made
easy
Quick assembly and quality all in one system
Drill mounting holes, assemble drawer, attach clip-on front fixing brackets, insert drawer into cabinet and you are done.
Depth
Width
Hei
ght
Width
Depth
Hei
ght
Drawer length
9
Ø5
3732
32
Inside opening width minus 31
Front edge Botto
m L
engt
h
20.5
32
9
Ø5
Inside opening width minus 31
Hei
ght
24R
unne
rP
osit
ion
7 /16
"m
in.
Cha
rtm
in.
37
1188654150N
MK
H
Side
Bottom
64forM, K& H
32for
N
Drill Ø10mm x 12mm deep for brackets with dowels
Blumassembly
devices makemarking and drilling simple.
Inch
Metric
Pre-drill holes in back if using system screws
Bottom overlay
Drillinglocation
3
1
21.
2.
3.
4.
5.
6.
METABOX: Steps for frameless cabinets
7.
Measure the opening
This will help you in determiningwhich METABOX drawer will work best for the cabinet opening
Determine which METABOXdrawer height to use
Choose between the four heights that are offered within the METABOX system
Min. opening height
Available heightsN M K H
78 Yes No No No110 Yes Yes No No142 Yes Yes Yes No174 Yes Yes Yes Yes
HeightsAvailable lengths
270 350 400 450 500 550N No Yes Yes Yes Yes YesM Yes Yes Yes Yes Yes YesK No Yes Yes Yes Yes YesH No Yes Yes Yes Yes Yes
Min.insidedepth
277 357 407 457 507 557
Drawer bottomsRunner length Bottom length
550 548500 498450 448400 398350 348270 268
Drawer backsHeights 13mm bottoms 16mm bottoms 19mm bottoms
N 42 39 36M 74 71 68K 106 103 100H 138 135 132
Sideoverlay
Screw ordrillinglocation
13 21.514 22.516 24.5
17.5 2619 27.5
Bottomoverlay
Screw or drilling location
N and M K H13 26.5 58.5 90.514 27.5 59.5 91.516 29.5 61.5 93.5
17.5 31 63 9519 32.5 64.5 96.5
Heights Mounting positionN 54M 86K 118H 150
Assemble the drawer
Assembly is made easy with theMETABOX C15 drawer system
1 - Place drawer bottom on pins2 - Attach drawer back with screws3 - Install front fixing brackets and attach front to drawer sides
Mount the cabinet profiles
Attach the cabinet profiles to the cabinet
Cut the bottom and back components
No matter what the material or the size of the cabinets, components can be cut and drilled quickly for easy assembly(minimum 13mm material)
Determine front fixing bracket locations
Use the tables below to easily locate the center of the bottom fixing point
Dimensions in Millime-
Determine which METABOXdrawer length fits the opening
Choose the correct runnerlength to best fit the insidedepth of the cabinet
Install the drawer
Now that the drawer is built and the cabinet profiles are in place, the drawer can be inserted. Final side and height adjustments can be made via the front fixing brackets.
These drilling locations are directly related to the profile locations in step 7