metaldyne viscous dampers - find the needlepdfs.findtheneedle.co.uk/29428.pdf · 2015-05-18 · 1...
TRANSCRIPT
FORMERLY
Metaldyne Viscous DampersFormerly Simpson/Holset Viscous Dampers
Some of the engine manufacturers supplied as follows:Maintenance and repair of Vibration Dampers
Is your damper providing engine protection?ABC
Alpha Diesel / M.A.N. / B&W / Holeby
Adriadiesel
Bergen Diesel (Rolls Royce)
Bolnes (Wartsila)
Baudouin
DDC
Cegielski / Zgoda / Sulzer
Crepelle
Cummins
CAT 3618 - 3608
Daewoo (Khic) Doosan
Deutz (Barreras)
Fincantieri (Gmt) ( Wartsila )
Fiat
Guascor
H.H.M. China Q.M.D. Shenfei China D.M.D. China
Hyundai (Himsen) (HHI. RTA Engines)
Jenbacher Gas Engines
MAK
M.A.N. Group : Ruston / Paxman / Mirrlees
Mitsui
Nohab (Wartsila)
Paxman (M.A.N.)
Ruston (M.A.N.)
Swd (Stork) (Wartsila)
Sulzer (I.H.I) (RTA Series)
STX Enpaco (Ssangyong)
SKL – Spares
Volvo
W.H.Allen (Rolls Royce)
Waukesha Dresser
Wartsila Group (Wartsila S.A.C.M.)
Wuxi Diesel – Engine G8300 ZC 22BH (Damper Service Available)
Uljanik / Split Diesel / 3MAJ
Yanmar
Ref: 2014
Metaldyne International (UK) Ltd
Service Department
131 Parkinson Lane, Halifax, West Yorkshire, HX1 3RD
Tel:+44 (0)1422 357234 Fax:+44 (0)1422 354432
Homepage:www.metaldyne.co.uk
[email protected] Certificate number: M-12299
1 Damper failure resulting from lack of sample analysis – Even up to this point the bearings can be replaced using Metaldyne’s expertise.
2 Conversion of Lead Bronze bearing to PTFE.
4 Case cover conversion.
5 Re-assembly, using technically superior material which will greatly extend the operating life of the damper.
Laboratory analysis of silicone samples
6 Fully rebuilt ready for pressure and vacuum testing.
7 The damper is now totally reconditioned and meets the latest technical specification. It is effectively, as new.
3 Machining inertia ring to remove bearing damage and to prepare a perfect surface that will ensure optimum damper performance.
The most comprehensive protection for your investmentTorsional Vibration Dampers• Systematic Fluid Sampling provides early warning
of damper failure
• Maintenance saves cost of replacement and down time
• Service minimises long term running costs
Metaldyne has over 50 years’ experience in the field of damper service and provides the most comprehensive service for all makes and types. The Company has been assessed and approved to the International Quality Assurance Standard ISO 9001.
Our team of technical experts would be delighted to discuss your project and give you the support and advice that you need.
The viscosity of silicone fluid is determined by the chain length of the thread-like molecule. Under adverse conditions, silicone fluid inside the damper tears into smaller chain lengths, leading to a change in viscosity, damping ability and operating efficiency of the unit.
Damping Fluid
Sampling • Regular sampling is the most cost-effective means of ensuring the operating efficiency of your
dampers and engine protection
• Expert analysis of a small volume of fluid taken from the damper, in situ, will indicate the internalmechanical condition of the sealed unit
• For a small charge, Metaldyne provides Sampling Kits for this purpose, with instructions for use
• On receipt of the returned sample, laboratory analysis will highlight the fluid viscosity andoperating efficiency of the unit
• It is recommended that a fluid sample is taken after the first 15,000-18,000 service hours.
Normally within 24 hours a report will detail the results of the analysis, with recommendations: a) the present condition, b) prognosis of safe service life, or c) action to be taken on a defective unit.
Chemical structure of silicone fluid Dimethyl Polysiloxane, with unbranched chains alternately structured from successive silicone and oxygen atoms saturated with methyl groups.
• In-house servicingof dampers up to1500mm diameter.
• On-site servicingworldwide fordampers over1500mm diameter.
• Emergency service,7 days a week.
• Emergency overhaulwithin 24 hours.
• Re-conditioned dampers canbe certified forClassificationSocieties on request.