Meter, PD Series JB10-S1, S3, S5Parts ListIssue/Rev. 0.0 (2/13) Bulletin PO01019

2003 - Current

The Most Trusted Name In Measurement

Item

Description

Qty.

Pre 1998 JB10-S1

Pre 1998 JB10-S3, S5

1998-2003 w/o Vent Kit JB10-S3, S5

2003-Present w/Vent Kit JB10-S3, S5

Pre 2003

Page 2 PO01019

Issue/Rev. 0.0 (2/13)

Item

Description

Pre 1998 Inner Mechanism Qty. JB10-S1

2003 - Current

Pre 1998 JB10-S3, S5

1998-2003 w/o Vent Kit JB10-S3, S5

2003-Present w/Vent Kit JB10-S3, S5

Issue/Rev. 0.0 (2/13)

PO01019 Page 3

Item

Description

Pre 1998 Inner Mechanism Qty. JB10-S1

Pre 2003

Pre 1998 JB10-S3, S5

1998-2003 w/o Vent Kit JB10-S3, S5

2003-Present w/Vent Kit JB10-S3, S5

Page 4 PO01019

Issue/Rev. 0.0 (2/13)

Item Item 1

Description Description

Qty. Qty.

Pre Pre 1998 1998 JB10-S1 JB10-S1 518350-001 506123-002 643877-401 ................... 512059-001 512060-001 516130-xxx 516105-001 003905-001 005969-001 005969-002 003540-001 072103-001 500283-001 ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... 003553-001 003834-001 011337-001 500351-001 500351-008Consult Factory

Pre Pre 1998 1998 JB10-S3, JB10-S3,S5 S5 518350-002 506123-003 065433-005 ................... 512059-001 512060-001 516130-xxx 516105-001 003905-001 005969-001 005969-002 003540-001 072103-001 504044-001 ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... 003553-001 003834-001 011337-001 009652-001 009652-002 ..................Consult Factory Consult Factory

1998-2003 1998-2003 w/o w/oVent VentKit Kit JB10-S3, JB10-S3,S5 S5 518350-002 506123-003 065433-005 ................... 512059-001 512060-001 516130-xxx 516105-001 003905-001 005969-001 005969-002 003540-001 072103-001 554268-001 ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... 003553-001 003834-001 011337-001 009652-001 009652-002 ................... 554265-001 554279-001 503554-001 646057-402 006588-001 504001-001 504001-002 003348-001 006053-002 006571-001 003440-001 517715-002 006505-002 645242-402 006759-002 645242-408

2003-Present 2003-Present w/Vent w/VentKit Kit JB10-S3, JB10-S3,S5 S5 518350-002 506123-003 655425-408 646638-404 512059-001 512060-001 516130-xxx 516105-001 003905-001 005969-001 005969-002 003540-001 072103-001 554268-003 554606-003 645350-401 645242-402 646205-402 065309-002 646612-401 554059-003 646200-401 554336-001 643386-405 644759-402 003553-001 003834-001 011337-001 009652-001 009652-002 ................... 554265-001 554279-001 503554-001 646057-402 006588-001 504001-001 504001-002 003348-001 006053-002 006571-001 003440-001 517715-002 006505-002 645242-402 006759-002 645242-408PO01019 Page 5

Adapter: Standard and ATC............................ 1 ATG .................................................. 1 2 Bolt, Eye............................................... 2 3 * Washer ............................................. 2 4 + Calibrator: Manual ............................................. 1 With ATC (Standard) ........................ 1 @1 With ATC (Special Drilled)................ 1 Dummy Calibrator ............................ 1 5 Clamp, Oil Tube .................................... 1 6 Coupling Assembly: Standard, Used on 3/16" Shaft ........ 1 Used on Xmitters with 1/4" Shaft ..... 1 7 Pin .................................................... 1 8 Coupling, Drive .................................... 1 9 Cover ................................................... 1 Vent: 10 Vent Housing .................................... 1 11 Pipe Plug, 2" NPT ............................ 1 12 Pipe Plug, 1/2" NPT ......................... 1 13 Screw ............................................... 4 14 Washer ............................................. 4 15 O-Ring.............................................. 1 16 Spacer.............................................. 1 17 Fitting ............................................... 1 18 Adapter ............................................ 1 19 Elbow ............................................... 1 20 3/8" Tubing ....................................... 1 21 Cover, Knob ......................................... 1 22 Gasket, Cover Plate ............................. 1 23 + Gasket, Packing Gland ........................ 1 24 +@2 Gland, Packing: Buna-N ............................................. 1 Teon ............................................... 1 25 Housing, Outer: S1..................................................... 1 S3..................................................... 1 S5..................................................... 1 26 Lubrication Assembly ........................... 1 27 Nut, Hex Heavy, Meter Cover............... 48 28 Oiler ..................................................... 1 29 + O-Ring, Cover: Buna-N ............................................. 1 Viton ................................................. 1 30 Pin, Locating Dowel ............................. 2 31 Pin, Groove, 5/64 x 1/2" ....................... 1 32 Plate, Caution ...................................... 1 33 Plate, Cover ......................................... 1 34 * Plate, Lubrication ................................. 1 35 Plug, Pipe, 1/2" NPT: Standard .......................................... 2 NACE ............................................... 2 36 Plug, Pipe, 2" NPT: Standard .......................................... 1 NACE, S3 Only ................................ 1Issue/Rev. 0.0 (2/13)

................... ................... ................... 006258-400 006588-001 511874-001 511874-002 003348-001 006053-002 006571-001 003440-001 ................... 006505-002 ................... 006759-002 ...................

503554-001 006385-400 006588-001 504001-001 504001-002 003348-001 006053-002 006571-001 003440-001 517715-002 006505-002 645242-402 006759-002 645242-408

Item 37 38 39 40 41 42 43

Description Screw, Adapter Cover .......................... Screw, Base Plate, #10-32 x 7/8"......... Screw, Calibrator Mount #6-32 x 5/16" .... Screw, Cover Plate, #10-32 x 3/8" ....... Screw, Drive, Caution Plate ................. Screw, Knob Cover, #10-24 x 3/4" ....... Screw, Nozzel to Inner Mech: 5/8 - 11 x 2" ...................................... NACE ............................................... Screw, Packing Gland: 5/16-18 x 1-1/4" ............................... Seal, Lead and Wire ............................ Shaft Assembly, Calibrator ................... Coupling, Lower Drive ...................... Coupling, Upper Drive...................... Shaft................................................. Pin, Groove, 5/64 x 1/2" ................... Stem Assembly, Adjusting.................... Ball ................................................... Plate, Base....................................... Plate, Retainer ................................. Spring, Knob .................................... Stem, Adjusting ................................ Stud, Meter Cover ................................ Tube, Oil ............................................... Washer, Cinch Bolt ..............................

Qty. 2 2 2 2 8 2 4 4 3 2 1 1 1 1 2 1 2 1 1 2 1 24 1 4

Pre 1998 JB10-S1 642043-432 640835-001 006048-002 006045-002 009880-400 006481-003 643700-401 .................. 006511-002 001627-400 .................. .................. .................. .................. .................. 009838-001 006427-001 003552-001 003556-001 003557-001 003551-001 065357-001 514658-001 514584-001

Pre 1998 JB10-S3, S5 642043-432 640835-001 006048-002 006045-002 009880-400 006481-003 643700-401 645192-401 006511-002 001627-400 501972-001 503408-001 501970-001 501971-001 006053-002 009838-001 006427-001 003552-001 003556-001 003557-001 003551-001 640446-001 514658-001 514584-001

1998-2003 w/o Vent Kit JB10-S3, S5 642043-432 640835-001 006048-002 006045-002 009880-400 006481-003 643700-401 645192-401 006511-002 001627-400 501972-001 503408-001 501970-001 501971-001 006053-002 009838-001 006427-001 003552-001 003556-001 003557-001 003551-001 655422-401 514658-001 514584-001

2003-Present w/Vent Kit JB10-S3, S5 642043-432 640835-001 006048-002 006045-002 009880-400 006481-003 643700-401 645192-401 006511-002 001627-400 501972-001 503408-001 501970-001 501971-001 006053-002 009838-001 006427-001 003552-001 003556-001 003557-001 003551-001 655422-401 514658-001 514584-001

44 45 + 46 47 48 49 50 51 52 53 54 55 56 57 58 59

Inner Mechanism Item 60 61 Description Base......................................................................................................... Block: Standard (up to 1,000 SSU) ................................................................. Hi-Viscosity 1 For 1,000 SSU to 3,000 SSU ........................................ Hi-Viscosity 2 For 3,000 SSU to 5,000 SSU ........................................ Hi-Viscosity 3 For 5,000 SSU to 10,000 SSU ...................................... Body......................................................................................................... Bolt, Eye .................................................................................................. Cap, Adjusting Screw............................................................................... Shaft, Drive Gear ................................................................................. Cover: with Vent .............................................................................................. without Vent ......................................................................................... Dowel, Cover and Base ........................................................................... Fitting, Pitot .............................................................................................. Gear, Calibrator Drive: Barrels, Standard and All Iron .............................................................. Barrels, LPG ......................................................................................... Hectoliters, Standard and All Iron ........................................................ Hectoliters, LPG ................................................................................... Bushing: Standard and All Iron .................................................................... LPG ............................................................................................... Pin .................................................................................................... Qty. 1 1 1 1 1 1 2 1 1 1 1 2 1 1 1 1 1 1 1 2 Part Number 500186-002 536590-001 536590-201 536590-202 536590-203 515174-001 643877-401 536276-001 003569-001 536277-004 536277-001 501205-001 072186-001 504194-001 536529-001 515304-001 536533-001 065311-001 512797-001 500418-001Issue/Rev. 0.0 (2/13)

62 63 64 65 66

67 68 69

@3

70

*

71

Page 6 PO01019

Item 72 @3

Description Gear, Idler: Barrels, Standard and All Iron .............................................................. Barrels, LPG ......................................................................................... Hectoliters, Standard and All Iron ........................................................ Hectoliters, LPG ................................................................................... Bushing, LPG ................................................................................... Gear, Jackshaft ........................................................................................ Gear, Jackshaft Pinion: Barrels and Hectoliters ......................................................................... Imperial Gallons ................................................................................... Lug, Lifting, Rotor Assembly .................................................................... Nut, Rotor Shaft, 1-1/2"-12 ...................................................................... Pin, Cotter, 1/16 x 1/2" ............................................................................. Pin, Groove, 3/32 x 1/2" ........................................................................... Plug, Pipe, 1/2" NPT ................................................................................ Rotor and Blade Assembly: Standard............................................................................................... All Iron .................................................................................................. LPG ...................................................................................................... Bar, Adjusting ................................................................................... Bearing, Rotor: Standard and All Iron .................................................................... LPG ............................................................................................... Bearing, Thrust: Standard and LPG ........................................................................ All Iron ........................................................................................... Blade Assembly, Lower: Standard (up to 1,000 SSU) and LPG .......................................... All Iron (up to 1,000 SSU) ............................................................. Std. Modied for 1,000 SSU to 3,000 SSU ................................ Std. Modied for 3,000 SSU to 5,000 SSU ................................ Std. Modied for 5,000 SSU to 10,000 SSU .............................. Std. Modied for 200F Max. ...................................................... Std. Modied for 1,000 SSU to 3,000 SSU and 200F ............... Std. Modied for 3,000 SSU to 5,000 SSU and 200F ............... Std. Modied for 5,000 SSU to 10,000 SSU and 200F ............. A.I. Modied for 5,000 SSU to 10,000 SSU .................................. Bearing, Blade: Nylon Retainer ....................................................................... Bushing, Blade .......................................................................... Pin, Cotter, 3/32 x 1-1/4" ........................................................... Shaft, Blade Bearing ................................................................. Blade Assembly, Middle: Standard (up to 1,000 SSU) and LPG .......................................... All Iron (up to 1,000 SSU) ............................................................. Std. Modied for 1,000 SSU to 3,000 SSU ................................ Std. Modied for 3,000 SSU to 5,000 SSU ................................ Std. Modied for 5,000 SSU to 10,000 SSU .............................. Std. Modied for 200F Max. ...................................................... Std. Modied for 1,000 SSU to 3,000 SSU and 200F ............... Std. Modied for 3,000 SSU to 5,000 SSU and 200F ............... Std. Modied for 5,000 SSU to 10,000 SSU and 200F ............. A.I. Modied for 5,000 SSU to 10,000 SSU ............................... Bearing, Blade: Nylon Retainer...................................................................... Bushing, Blade .......................................................................... Pin, Cotter, 3/32 x 1-1/4" ........................................................... Shaft, Blade Bearing .................................................................

Qty. 1 1 1 1 1 1 1 1 1 2 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 4 2 2 2 1 1 1 1 1 1 1 1 1 1 4 2 4 2

Part Number 516304-001 536528-001 515302-001 536532-001 512797-001 500225-001 500704-001 512249-001 552125-001 641997-402 001095-401 006136-002 006505-002 537691-001 536279-002 537691-003 536440-001 513168-001 513168-002 643999-401 644010-401 536266-001 537714-001 536266-101 536266-102 536266-103 536266-104 536266-105 536266-106 536266-107 537714-103 644412-405 512353-001 006373-001 551361-001 536263-001 536587-001 536263-101 536263-102 536263-103 536263-104 536263-105 536263-106 536263-107 536587-103 644412-405 512353-001 006373-001 551361-001PO01019 Page 7

73 74 75

@3

76 77 78 79 80 81

82 83

+

84

+

85

+

86 87 88 89 90

+

+

91 92 93 94

+

Issue/Rev. 0.0 (2/13)

Item 95 +

Description Blade Assembly, Upper: Standard (up to 1,000 SSU) and LPG .......................................... All Iron (up to 1,000 SSU) ............................................................. Std. Modied for 1,000 SSU to 3,000 SSU ................................ Std. Modied for 3,000 SSU to 5,000 SSU ................................ Std. Modied for 5,000 SSU to 10,000 SSU .............................. Std. Modied for 200F Max. ...................................................... Std. Modied for 1,000 SSU to 3,000 SSU and 200F ............... Std. Modied for 3,000 SSU to 5,000 SSU and 200F ............... Std. Modied for 5,000 SSU to 10,000 SSU and 200F ............. A.I. Modied for 5,000 SSU to 10,000 SSU ............................... Bearing, Blade: Nylon Retainer ....................................................................... Bushing, Blade .......................................................................... Pin, Cotter, 3/32 x 1-1/4" ........................................................... Shaft, Blade Bearing ................................................................. Cam and Shaft Assembly ................................................................. Cam .............................................................................................. Key ................................................................................................ Shaft.............................................................................................. Collar ................................................................................................ Cone, Shaft ....................................................................................... Key.................................................................................................... Lock, Rotor Bearing, Lower .............................................................. Lock, Rotor Bearing, Upper .............................................................. Nut, Adjusting Screw, 1/2"-20 UNF-2B ............................................. Pin, Roll, 5/32 x 1" ............................................................................ Pin, Rotor Cover Roller ..................................................................... Plate, Rotor Cover Roller Pin............................................................ Plate, Lock Assembly ....................................................................... Plate, Rotor Gear .............................................................................. Pin, Dowel ..................................................................................... Roller, Rotor Cover ........................................................................... Rotor, Sub Assembly: Standard (up to 1,000 SSU).......................................................... Std. Modied for 1,000 SSU to 3,000 SSU ................................ Std. Modied for 3,000 SSU to 5,000 SSU ................................ Std. Modied for 5,000 SSU to 10,000 SSU .............................. Dowel ........................................................................................ Screw, Cap, 3/8"-16 UNC-2A, Drilled ........................................ Sleeve, Lower: (1993 to present) ................................................................... (Prior to 1993) ....................................................................... Sleeve, Upper: (1993 to present) ................................................................... (Prior to 1993) ....................................................................... Screw, Adjusting ............................................................................... Screw, Cap, 1/4-20 x 1/2" ................................................................. Screw, Cap, 3/8-16 x 1-1/4" .............................................................. Washer, Flat ...................................................................................... Screw, #10-32 x 3/8" Nylock .................................................................... Screw, Adjusting Screw Cap, 5/16-18 x 1-1/4" ........................................ Screw, Body, 5/8-11 x 1-3/4" .................................................................... Screw, Body to Block, 1/2-13 x 1-1/2 ....................................................... Screw, Drive, Caution Tag ........................................................................ Screw, Pitot, #10-32 x 1/2"....................................................................... Screw, Set, 1/4-20 x 1/4" .........................................................................

Qty.

Part Number

1 1 1 1 1 1 1 1 1 1 4 2 2 2 1 1 1 1 1 1 1 1 1 2 1 6 12 2 1 1 6 1 1 1 1 9 8 1 1 1 1 1 12 6 1 2 4 24 3 2 2 1

536265-001 537713-001 536265-101 536265-102 536265-103 536265-104 536265-105 536265-106 536265-107 537713-103 644412-405 512353-001 006373-001 551361-001 536254-001 536251-001 536255-001 536253-001 536269-001 536273-001 500192-001 536403-001 537069-001 640671-001 010527-400 500197-001 536272-001 512965-001 536268-001 000004-001 500196-001 536259-001 536259-101 536259-102 536259-103 500415-001 642048-419 553577-001 536258-002 553576-001 536258-001 536274-001 006775-002 640367-001 065309-002 643339-401 006151-002 006156-002 006097-002 006220-002 006110-002 006538-001Issue/Rev. 0.0 (2/13)

96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117

+

+

+

118 119 120

@4

121

@4

122 123 124 125 126 127 128 129 130 131 132

*

Page 8 PO01019

Item 133 134

Description Shaft, Idler Gear ...................................................................................... Sleeve, Assembly: Standard and All Iron ........................................................................... LPG ...................................................................................................... Bushing: Standard and All Iron .................................................................... LPG ............................................................................................... Tag, Caution............................................................................................. Washer..................................................................................................... Washer: Standard and All Iron ........................................................................... LPG ...................................................................................................... Washer, Flat ............................................................................................. Washer, Lock ...........................................................................................

Qty. 1 1 1 2 2 1 3 1 1 2 3

Part Number 500233-001 500412-001 512791-001 519882-002 512796-001 006572-001 014012-200 009615-400 060554-001 006929-001 642482-406

135

136 137 138

*

139 140

Inner Mechanism General Assembly Numbers Barrel Geared, Standard.......................................................................... Barrel Geared, All Iron Trim ..................................................................... Barrel Geared, LPG Trim ......................................................................... Hectoliter Geared, Standard .................................................................... Hectoliter Geared, All Iron Trim ................................................................ Hectoliter Geared, LPG Trim .................................................................... * + R @1 @2 @3 @4 536279-091 536279-092 536279-093 536279-291 536279-292 536279-293

Not illustrated. Recommended stock. Indicates change since last revision. Note 1: When ordering, include meter model and gearing, temperature and API gravity, and table. Note 2: See Form No. P0605.* for component. Note 3: Only standard gearing is listed. For additional gearing combinations, see Gear Train Bulletin AB10123. Note 4: Apply a small amount of Loctite (Part No. 645001-401) to sleeve before installing in rotor.

Issue/Rev. 0.0 (2/13)

PO01019 Page 9

Item

Description

Qty.

Part Number

Revisions in PO01019 Issue/Rev. 0.0 (2/13): Based on and replaced publication P0552.08X, which has been made obsolete. Total revision since last revision of P0552.08X.

The specications contained herein are subject to change without notice and any user of said specications should verify from the manufacturer that the specications are currently in effect. Otherwise, the manufacturer assumes no responsibility for the use of specications which may have been changed and are no longer in effect. Contact information is subject to change. For the most current contact information, visit our website at www.fmctechnologies.com/measurementsolutions and click on the Contact Us link in the left-hand column.

Headquarters: 500 North Sam Houston Parkway West, Suite 100, Houston, TX 77067 USA, Phone: +1 (281) 260 2190, Fax: +1 (281) 260 2191 Measurement Products and Equipment: Erie, PA USA +1 (814) 898 5000 Ellerbek, Germany +49 (4101) 3040 Barcelona, Spain +34 (93) 201 0989 Beijing, China +86 (10) 6500 2251 Burnham, England +44 (1628) 603205 Dubai, United Arab Emirates +971 (4) 883 0303 Los Angeles, CA USA +1 (310) 328 1236 Melbourne, Australia +61 (3) 9807 2818 Moscow, Russia +7 (495) 5648705 Singapore +65 6861 3011 Integrated Measurement Systems: Corpus Christi, TX USA +1 (361) 289 3400 Kongsberg, Norway +47 (32) 286700 Dubai, United Arab Emirates +971 (4) 883 0303

Visit our website at www.fmctechnologies.com/measurementsolutionsPrinted in U.S.A. 2/13 FMC Technologies Measurement Solutions, Inc. All rights reserved. PO01019 Issue/Rev. 0.0 (2/13)