micro switch™ ls general purpose limit switches...ls 1 standard with 38,1 mm fixed length lever...

MICRO SWITCH™ LS General Purpose Limit SwitchesLS Series

Datasheet

2 sensing.honeywell.com

What makes our switches better? Small size and universal mounting footprint may allow for use in

constricted spaces

IP67 and NEMA 1, 3, 4, 6 and 13 ratings available provide a dependable solution in most demanding environmental conditions

Rugged die-cast metal construction with a wide variety of heads and actuators provides long life across numerous applications

MICRO SWITCH™ legacy and expertise - over 55 years of engineering excellence and experience with industrial limit switches

MICRO SWITCH™ LS General Purpose Limit SwitchesThe Honeywell MICRO SWITCH™ Compact LS Limit Switch Series offers products that have a long record of successful performance in a diverse range of industrial applications. Under severe conditions, its durable and dependable design provides longevity, precision, and consistent repeatability over millions of operations.

The compact size and adjustable features propel the LS Series to flourish in a variety of settings under space constraint without sacrificing reliability. Its construction is oil-tight, water-tight and dust tight, and includes die-cast housing, heads and actuators. An assortment of heads and actuators provides a solution for a variety of applications.

QUALITY, RELIABLERUGGED, GLOBAL

Rugged, metal housing packaged for industrial indoor and outdoor applications

3sensing.honeywell.com

Features and Benefits Features and Benefits

ENHANCED PERFORMANCE COMPACT DESIGNAlong with industry standard mounting dimensions, the LS Series compact design allows installation in applications under space constraint while still providing reliable switching performance

TWO CIRCUIT DOUBLE BREAK CONTACTSWith an AC15, A300 or 10 A electrical rating, the LS Series provides dependable and consistent switching, giving the end users control of two circuits in one switch

ACTUATORS FOR YOUR APPLICATIONWith many actuators available such as side rotary, plunger, wobble stick and roller plunger, the LS Series is adaptable and has the ability to be applied in a variety of applications

SEALED CONSTRUCTIONIn demanding environmental conditions, IP67 or NEMA 1, 3, 4, 6, and 13 sealing protects against oil, dust and water making the LS Series a dependable solution in a variety of conditions for both indoor and outdoor applications

One switch controls two circuits!

MACHINE TOOL EQUIPMENTPart presence, machine slide/table position, panel and door presence

MATERIAL HANDLINGSensing in overhead doors, door interlock, dock locks, conveyance, storage retrieval, carousels, conveyors, and assembly lines

VALVE ACTUATIONPosition sensing of electric valves for waste water treatment plants, power plants, refineries, and pipelines

FOOD AND BEVERAGESensing during bottling, canning, and packaging

SPECIAL MACHINERYAssembly, packaging and testing applications

Potential Applications


LS Series

MICRO SWITCH™ LS SERIES PRODUCT NOMENCLATURE

Switch body

Compact SPDT

SPDT Plug-in less base

Switch styleProd-

uct family

Actuator code

Actuator descriptionModifications

(may be applied to most configurations)

1 201

side rotary (momentary)

CW and CCW actuation. Field

adjustable for CW and CCW

LS

1standard with 38,1 mm fixed length lever

with steel roller

(blank)0.5-14 NPT conduit

-LUL/CSA certified with 0.5-14

NPT conduit

-4CCE with 20 mm conduit

-4PGCE with PG 13,5 mm conduit

19low pretravel with 38,1 mm fixed length

lever with steel roller

6low operating torque with 38,1 mm fixed

length lever with steel roller

131low pretravel, low operating torque with

38,1 mm fixed length lever with steel roller

3standard with adjustable length lever,

38 mm to 89 mm with nylon roller

10standard with adjustable 127 mm

aluminum rod

2 standard, no lever

9 low pretravel with no lever

23 low operating torque with no lever

56low pretravel, low operating torque with

no lever

2202 top pin plunger

LS1 standard

n/a top pin plunger 111 plunger boot seal

3 203 side roller plunger LS 1 standard

4 204 side pin plunger LS 1 standard

5205 top roller plunger

LS1 standard

n/a top roller plunger 8 plunger boot seal

6 206two position side

rotary (maintained)LS

1standard with 38,1 mm fixed length fork

lever with roller

2 no lever

7 n/aside rotary enclo-

sure mountLS 1

standard with 38,1 mm fixed length lever with steel roller

8

208 wobble actuator

LS

1 steel coil spring, 141 mm

208 wobble actuator 3 aluminum rod, 141 mm

208 wobble actuator 125 cat whisker, 191 mm

208 wobble actuator 152stainless steel coil spring,

141 mm

Not all combinations are available. Please contact your Honeywell provider/representative for assistance.


MICRO SWITCH™ General Purpose Limit Switches

Table 1. Specifications

Characteristic North America EMEA (Europe)

Product typeHoneywell general purpose LS limit switch,

compact and plug-in

Honeywell general purpose LS-4 limit switch,

compact and plug-in

Acutatorsside rotary, side rotary (maintained) top pin plunger, top roller plunger, wobble coil spring,

wobble aluminum rod, wobble cat whisker, wobble sst coil spring

Circuitry single pole double throw (SPDT) double break, single pole double throw (SPDT) double break

Electrical 10 A (see Table 2) AC 15, A300; DC 13, P300

Housing materialcompact: epoxy coated zinc die cast

plug-in: epoxy coated aluminum die castepoxy coated aluminum die cast

Conduit 0.5 – 14 NPT 20 mm or PG13,5

Housing seal rating NEMA 1,3,4, 6 and 13 IP67, NEMA 1,4 and 13

Operating temperaturestandard: -29 °C to 71 °C [-20 °F to 160 °F]

high temp.: -29 °C to 120 °C [-20 °F to 248 °F]

standard: -30 °C to 70 °C [-22 °F to 158 °F]

high temp.: -30 °C to 120 °C [-22 °F to 248 °F]

Agency certifications Compact with –L suffix UL file 12252, CSA file 57325 CE, EN60947-5-41, IEC60947-5-4

Table 2. Electrical Ratings

Electrical Code

Electrical Ratings

A 10 A, 120, 240 or 480 Vac; 1/3 hp 120 Vac; 3/4 hp 240 Vac; 0.8 amp, 115 Vdc; 0.4 amp, 230 Vdc; 0.1 amp, 550 Vdc, Pilot Duty, 600 Vac max.

B 10 A, 120, 240 or 480 Vac; 1/4 hp 120 Vac; 1/2 hp 240 Vac; Pilot Duty, 600 Vac max.

C 10 A, 1/3 hp 120 Vac

D 10 A, 120, 240 or 480 Vac; 1/4 hp 120 Vac; 1/2 hp 240 Vac; 0.8 amp, 115 Vdc; 0.4 amp, 230 Vdc; 0.1 amp, 550 Vdc, Pilot Duty, 600 Vac max.

E 10 A, 120, 240 or 480 Vac; 1/3 hp 120 Vac; 3/4 hp 240 Vac; Pilot Duty, 600 Vac max.

F 5 A, 6 V; 1 A, 24 V; 0.4 A, 220 V

G UL & CSA; 10 A, 125, 250 or 480 Vac; 1/3 hp 125 Vac; 3/4 hp 250 Vac; 0.8 amp, 115 Vdc; 0.4 amp, 230 Vdc

H UL & CSA; 10 A, 125, 250 or 480 Vac; 1/4 hp 125 Vac; 1/2 hp 250 Vac; 0.8 amp, 115 Vdc; 0.4 amp, 230 Vdc

J

EN60947-5-1, IEC 60947-5-1

Designation & Category

Thermal Current, It(Amps)

Rated Operational Voltage, Ue

Rated Operational Amps, Ie

VA rating Make VA rating Break

ac

AC15, A300 10 120 6 7200 720

AC15, A300 10 240 3 7200 720

dc

DC13, P300 5 125 1.1 138 138

DC13, P300 5 250 0.55 138 138


LS SeriesMICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR NORTH AMERICA)For listings not shown, contact your Honeywell representative.

Table 3. Side Rotary (Momentary), Standard Roller Lever

Compact, SPDT w 0.5-14 NPT

conduit

Plug-in less base*

DescriptionElectrical

Rating(Table 2)

Operating Torque or Force

Bar Chart1 Operate PointPretravel

(max.)Overtravel

(min.)

Differen-tial Travel

(max.)Notes

1LS1 201LS1 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller A 0,51 Nm [4.5 in-lb]

TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –

1LS1-L – side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller G 0,51 Nm [4.5 in-lb] – 20° 30° 12° UL & CSA

1LS2 – side rotary, no lever A 0,51 Nm [4.5 in-lb] – 20° 30° 12° –

1LS2-L – side rotary, no lever G 0,51 Nm [4.5 in-lb] – 20° 30° 12° UL & CSA

1LS243 201LS242 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller A 0,51 Nm [4.5 in-lb] – 20° 30° 12° high-temp. 120 °C [248 °F]

1LS6 201LS6 side rotary w/ 38,1 mm [1.5 in] fixed lever, steel roller A 0,19 Nm [1.7 in-lb] – 20° 30° 12° low torque

1LS6-L – side rotary w/ 38,1 mm [1.5 in] fixed lever, steel roller G 0,19 Nm [1.7 in-lb] – 20° 30° 12° low torque, UL & CSA

1LS23 201LS23 side rotary, no lever A 0,19 Nm [1.7 in-lb] 20° 30° 12° low torque

1LS501 201LS501 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller C 0,51 Nm [4.5 in-lb] – 20° 30° 12° indicator for 120 Vac only

1LS19 201LS19 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller B 0,51 Nm [4.5 in-lb]

TT

1-23-4

0° 5° 35°

3-41-2

OPFPDT = 4°

1°

– 5° 30° 4° low pretravel

1LS9 201SL9 side rotary, no lever B 0,51 Nm [4.5 in-lb] 5° 30° 4° low pretravel

1LS131 – side rotary w/ 38,1 mm [1.5 in] fixed lever, steel roller B 0,19 Nm [1.7 in-lb] – 5° 30° 4° low pretravel and low torque

1LS56 201LS56 side rotary, no lever B 0,19 Nm [1.7 in-lb] 5° 30° 4° low pretravel and low torque

1Contact closed n; Contact open o. *Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.

Table 4. Side Rotary (Maintained), Standard Fork Roller Lever


conduitPlug-in less base* Description

Electrical Rating

(Table 2)


Bar Chart1Operate

PointPretravel

(max.)Total travel

(nom.)


(max.)Notes

6LS1 206LS1side rotary maintained w/ 38,1mm [1.5 in] fork lever, steel rollers,

opposite sideA 0,34 Nm [3 in-lb]

TT

1-23-4

0° 55° 90°

3-41-2

OPFPDT = 20°

35°

– 55° 90° 20°

6LS2 206LS2 side rotary maintained, no lever A 0,34 Nm [3 in-lb] – 55° 90° 20°

6LS2-L – side rotary maintained, no lever G 0,34 Nm [3 in-lb] – 55° 90° 20° UL & CSA

6LS3 –side rotary maintained w/ 38,1mm [1.5 in] fork lever, nylon rollers,

same sideA 0,34 Nm [3 in-lb] – 55° 90° 20°



MICRO SWITCH™ General Purpose Limit Switches O.T. • Operating torqueO.F. • Operating forceR.P. • Release pointP.T. • PretravelO.T. • OvertravelD.T. • Differential travel

MICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR NORTH AMERICA)For listings not shown, contact your Honeywell representative.



conduit

Plug-in less base*


Rating(Table 2)



(max.)Overtravel

(min.)


(max.)Notes

1LS1 201LS1 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller A 0,51 Nm [4.5 in-lb]

TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –

1LS1-L – side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller G 0,51 Nm [4.5 in-lb] – 20° 30° 12° UL & CSA

1LS2 – side rotary, no lever A 0,51 Nm [4.5 in-lb] – 20° 30° 12° –

1LS2-L – side rotary, no lever G 0,51 Nm [4.5 in-lb] – 20° 30° 12° UL & CSA

1LS243 201LS242 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller A 0,51 Nm [4.5 in-lb] – 20° 30° 12° high-temp. 120 °C [248 °F]

1LS6 201LS6 side rotary w/ 38,1 mm [1.5 in] fixed lever, steel roller A 0,19 Nm [1.7 in-lb] – 20° 30° 12° low torque

1LS6-L – side rotary w/ 38,1 mm [1.5 in] fixed lever, steel roller G 0,19 Nm [1.7 in-lb] – 20° 30° 12° low torque, UL & CSA

1LS23 201LS23 side rotary, no lever A 0,19 Nm [1.7 in-lb] 20° 30° 12° low torque

1LS501 201LS501 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller C 0,51 Nm [4.5 in-lb] – 20° 30° 12° indicator for 120 Vac only

1LS19 201LS19 side rotary w/ 38,1mm [1.5 in] fixed lever, steel roller B 0,51 Nm [4.5 in-lb]

TT

1-23-4

0° 5° 35°

3-41-2

OPFPDT = 4°

1°


1LS9 201SL9 side rotary, no lever B 0,51 Nm [4.5 in-lb] 5° 30° 4° low pretravel

1LS131 – side rotary w/ 38,1 mm [1.5 in] fixed lever, steel roller B 0,19 Nm [1.7 in-lb] – 5° 30° 4° low pretravel and low torque

1LS56 201LS56 side rotary, no lever B 0,19 Nm [1.7 in-lb] 5° 30° 4° low pretravel and low torque


Table 4. Side Rotary (Maintained), Standard Fork Roller Lever



Electrical Rating

(Table 2)


Bar Chart1Operate

PointPretravel

(max.)Total travel

(nom.)


(max.)Notes

6LS1 206LS1side rotary maintained w/ 38,1mm [1.5 in] fork lever, steel rollers,

opposite sideA 0,34 Nm [3 in-lb]

TT

1-23-4

0° 55° 90°

3-41-2

OPFPDT = 20°

35°

– 55° 90° 20°

6LS2 206LS2 side rotary maintained, no lever A 0,34 Nm [3 in-lb] – 55° 90° 20°

6LS2-L – side rotary maintained, no lever G 0,34 Nm [3 in-lb] – 55° 90° 20° UL & CSA

6LS3 –side rotary maintained w/ 38,1mm [1.5 in] fork lever, nylon rollers,

same sideA 0,34 Nm [3 in-lb] – 55° 90° 20°



LS Series

Table 5. Side Rotary, Adjustable Roller Lever



Electrical Rating

(Table 2)

Operating Torque or

ForceBar Chart1 Operate Point

Pretravel (max.)

Overtravel (min.)


(max.)Notes

1LS3 201LS3side rotary w/ 38,1 mm to 88,9mm [1.5 in to 3.5 in]

adjustable lever, nylon rollerA

0,51 Nm [4.5 in-lb]

TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –

1LS3-L –side rotary w/ 38,1 mm to 88,9mm [1.5 in to 3.5 in]

adjustable lever, nylon rollerG

0,51 Nm [4.5 in-lb]

– 20° 30° 12° UL & CSA

1LS58 –side rotary w/ 38,1 mm to 88,9mm [1.5 in to 3.5 in]

adjustable lever, nylon rollerB

0,51 Nm [4.5 in-lb]

TT

1-23-4

0° 5° 35°

3-41-2

OPFPDT = 4°

1°




0,19 Nm [1.7 in-lb]

– 5° 30° 4° low pretravel and low torque


Table 6. Side Rotary, Adjustable Rod Lever



Electrical Rating

(Table 2)

Operating Torque or


Pretravel (max.)

Overtravel (min.)


(max.)Notes

1LS10 201LS10 side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod A0,19 Nm [1.7 in-lb]

TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –

1LS10-L – side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod G0,19 Nm [1.7 in-lb]

– 20° 30° 12° UL & CSA

1LS47 201LS47 side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod B0,19 Nm [1.7 in-lb]

TT

1-23-4

0° 5° 35°

3-41-2

OPFPDT = 4°

1°


1LS53 201LS51 side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod B0,11 Nm [1.0 in.lb]









Electrical Rating

(Table 2)

Operating Torque or


Pretravel (max.)

Overtravel (min.)


(max.)Notes

1LS3 201LS3side rotary w/ 38,1 mm to 88,9mm [1.5 in to 3.5 in]

adjustable lever, nylon rollerA

0,51 Nm [4.5 in-lb]

TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –

1LS3-L –side rotary w/ 38,1 mm to 88,9mm [1.5 in to 3.5 in]

adjustable lever, nylon rollerG

0,51 Nm [4.5 in-lb]

– 20° 30° 12° UL & CSA



0,51 Nm [4.5 in-lb]

TT

1-23-4

0° 5° 35°

3-41-2

OPFPDT = 4°

1°




0,19 Nm [1.7 in-lb]






Electrical Rating

(Table 2)

Operating Torque or


Pretravel (max.)

Overtravel (min.)


(max.)Notes

1LS10 201LS10 side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod A0,19 Nm [1.7 in-lb]

TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –

1LS10-L – side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod G0,19 Nm [1.7 in-lb]

– 20° 30° 12° UL & CSA

1LS47 201LS47 side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod B0,19 Nm [1.7 in-lb]

TT

1-23-4

0° 5° 35°

3-41-2

OPFPDT = 4°

1°


1LS53 201LS51 side rotary w/ 140 mm [5.5 in] max. adjustable aluminum rod B0,11 Nm [1.0 in.lb]




LS Series

Table 7. Top Pin Plunger



Electrical Rating

(Table 2)

Operating Torque or

ForceBar Chart1

Free Position (nom.)

Operate PointPretravel

(max.)Overtravel

(min.)


(max.)Notes

2LS1 202LS1 Top pin plunger (hardened SST) A31,1 N [7.0 lb]

TT

1-23-4

35,5 33,78 27,43

3-41-2

OPFPDT = 0,50

34,29

35,5 mm[1.40 in]

33,78 mm ±0,78 mm [1.33 in ±0.03 in]

1,65 mm [0.065 in]

6,35 mm [0.25 in]

0,51 mm [0.02 in]

–

2LS1-L – Top pin plunger (hardened SST) G31,1 N [7.0 lb]

35,5 mm[1.40 in]

33,78 mm ±0,78 mm [1.33 in ±0.03 in]

1,65 mm [0.065 in]

6,35 mm [0.25 in]

0,51 mm [0.02 in]

UL & CSA

2LS111 202LS111Top pin plunger (hardened SST)

with boot sealE

10,0 N [2.2 lb]

TT

1-23-4

35,5 33,78 28,23

3-41-2

OPFPDT = 0,23

28,46

35,5 mm[1.40 in]

33,78 mm ±0,78 mm [1.33 in ±0.03 in]

1,65 mm [0.065 in]

5,6 mm[0.22 in]

0,23 mm [0.009 in]

lower operating force

1Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters. *Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.

Table 8. Top Roller Plunger



Electrical Rating

(Table 2)

Operating Torque or


Pretravel (max.)

Overtravel (min.)


(max.)Notes

5LS1 205LS1 Top roller plunger (hardened steel roller) A31,1 N [7.0 lb]

TT

1-23-4

45,6 43,95 38,35

3-41-2

OPFPDT = 0,51

44,46

45,6 mm[1.80 in]

43,95 mm ±0,78 mm[1.73 in ±0.03 in]

1,65 mm [0.065 in]

5,6 mm[0.22 in]

0,51 mm [0.02 in]

–

5LS1-L – Top roller plunger (hardened steel roller) G31,1 N [7.0 lb]

45,6 mm[1.80 in]

43,95 mm ±0,78 mm[1.73 in ±0.03 in]

1,65 mm [0.065 in]

5,6 mm[0.22 in]

0,51 mm [0.02 in]

UL & CSA

5LS8 –Top roller plunger (hardened steel roller)

with boot seal15,57 N [3.5 lb]

45,6 mm[1.80 in]

43,95 mm ±0,78 mm[1.73 in ±0.03 in]

1,65 mm [0.065 in]

5,6 mm[0.22 in]

0,51 mm [0.02 in]



Table 9. Side Pin Plunger



Electrical Rating

(Table 2)

Operating Torque or

ForceBar Chart1



(max.)Overtravel

(min.)


(max.)Notes

4LS1 204LS1 Side pin plunger (SST) A40,0 N [9.0 lb]

TT

1-23-4

56,4 54,10 47,75

3-41-2

OPFPDT = 1,02

55,12

56,4 mm[2.22 in]

54,10 mm ±0,78 mm[2.13 in ±0.03 in]

2,77 mm[0.11 in]

6,35 mm [0.25 in]

1,02 mm[0.04 in]

–


Table 10. Side Roller Plunger



Electrical Rating

(Table 2)

Operating Torque or

ForceBar Chart1



(max.)Overtravel

(min.)


(max.)Notes

3LS1 203LS1 Side roller plunger (hardened steel roller) A40,0 N [9.0 lb]

TT

1-23-4

70,35 67,56 61,21

3-41-2

OPFPDT = 1,02

68,58

70,35 mm[2.77 in]

67,56 mm ±0,78 mm[2.66 in ±0.03 in]

2,79 mm[0.11 in]

6,35 mm [0.25 in]

1,02 mm[0.04 in]

Roller plunger may be locked in any position

through 360°







Electrical Rating

(Table 2)

Operating Torque or

ForceBar Chart1



(max.)Overtravel

(min.)


(max.)Notes

2LS1 202LS1 Top pin plunger (hardened SST) A31,1 N [7.0 lb]

TT

1-23-4

35,5 33,78 27,43

3-41-2

OPFPDT = 0,50

34,29

35,5 mm[1.40 in]

33,78 mm ±0,78 mm [1.33 in ±0.03 in]

1,65 mm [0.065 in]

6,35 mm [0.25 in]

0,51 mm [0.02 in]

–

2LS1-L – Top pin plunger (hardened SST) G31,1 N [7.0 lb]

35,5 mm[1.40 in]

33,78 mm ±0,78 mm [1.33 in ±0.03 in]

1,65 mm [0.065 in]

6,35 mm [0.25 in]

0,51 mm [0.02 in]

UL & CSA

2LS111 202LS111Top pin plunger (hardened SST)

with boot sealE

10,0 N [2.2 lb]

TT

1-23-4

35,5 33,78 28,23

3-41-2

OPFPDT = 0,23

28,46

35,5 mm[1.40 in]

33,78 mm ±0,78 mm [1.33 in ±0.03 in]

1,65 mm [0.065 in]

5,6 mm[0.22 in]

0,23 mm [0.009 in]






Electrical Rating

(Table 2)

Operating Torque or


Pretravel (max.)

Overtravel (min.)


(max.)Notes

5LS1 205LS1 Top roller plunger (hardened steel roller) A31,1 N [7.0 lb]

TT

1-23-4

45,6 43,95 38,35

3-41-2

OPFPDT = 0,51

44,46

45,6 mm[1.80 in]

43,95 mm ±0,78 mm[1.73 in ±0.03 in]

1,65 mm [0.065 in]

5,6 mm[0.22 in]

0,51 mm [0.02 in]

–

5LS1-L – Top roller plunger (hardened steel roller) G31,1 N [7.0 lb]

45,6 mm[1.80 in]

43,95 mm ±0,78 mm[1.73 in ±0.03 in]

1,65 mm [0.065 in]

5,6 mm[0.22 in]

0,51 mm [0.02 in]

UL & CSA

5LS8 –Top roller plunger (hardened steel roller)

with boot seal15,57 N [3.5 lb]

45,6 mm[1.80 in]

43,95 mm ±0,78 mm[1.73 in ±0.03 in]

1,65 mm [0.065 in]

5,6 mm[0.22 in]

0,51 mm [0.02 in]



Table 9. Side Pin Plunger



Electrical Rating

(Table 2)

Operating Torque or

ForceBar Chart1



(max.)Overtravel

(min.)


(max.)Notes

4LS1 204LS1 Side pin plunger (SST) A40,0 N [9.0 lb]

TT

1-23-4

56,4 54,10 47,75

3-41-2

OPFPDT = 1,02

55,12

56,4 mm[2.22 in]

54,10 mm ±0,78 mm[2.13 in ±0.03 in]

2,77 mm[0.11 in]

6,35 mm [0.25 in]

1,02 mm[0.04 in]

–


Table 10. Side Roller Plunger



Electrical Rating

(Table 2)

Operating Torque or

ForceBar Chart1



(max.)Overtravel

(min.)


(max.)Notes

3LS1 203LS1 Side roller plunger (hardened steel roller) A40,0 N [9.0 lb]

TT

1-23-4

70,35 67,56 61,21

3-41-2

OPFPDT = 1,02

68,58

70,35 mm[2.77 in]

67,56 mm ±0,78 mm[2.66 in ±0.03 in]

2,79 mm[0.11 in]

6,35 mm [0.25 in]

1,02 mm[0.04 in]

Roller plunger may be locked in any position

through 360°


LS SeriesMICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR NORTH AMERICA)For listings not shown, contact your Honeywell representative.


Table 11. Side Rotary with Face Plate


conduitPlug-in less base Description

Electrical Rating

(Table 2)

Operating Torque or


Pretravel (max.)

Overtravel (min.)


(max.)Notes

7LS1 –Face plate with 1LS1 for enclosure installation with 38,1 mm [1.5 in] fixed

lever, steel rollerA

0,51 Nm [4.5 in-lb]

TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –

1Contact closed n; Contact open o.

Table 12. Wobble, Coil Spring



Electrical Rating

(Table 2)

Operating Torque or

ForceBar Chart1 Operate Point2 (max.)

Pretravel (max.)

Overtravel (nom.)


(max.)Notes

8LS1 208LS1Wobble actuated, random motion 141 mm [5.55 in] tin plated, coil spring

steelD

1,39 N [5.0 oz]

TT

1-23-4

0 28,659,3

3-41-2

OPFP

(nom.)

RP

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –

8LS1-L –Wobble actuated, random motion 141 mm [5.55 in] tin plated, coil spring

steelH

1,39 N [5.0 oz]

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– UL & CSA

8LS3 208LS3 Wobble actuated, random motion 141 mm [5.55 in] aluminum rod D1,39 N [5.0 oz]

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –

8LS125 208LS125Wobble actuated, random motion 191 mm [7.53 in] stainless steel cat whis-

kerD

0,28 N [1.0 oz]

TT

1-23-4

0 63,5127

3-41-2

OPFP

(nom.)

RP

63,5 mm[2.5 in]

63,5 mm[2.5 in]

63,5 mm[2.5 in]

– –

8LS152 208LS152 Wobble actuated, random motion 141 mm [5.55 in] stainless steel coil spring D1,39 N [5.0 oz]

TT

1-23-4

0 28,659,3

3-41-2

OPFP

(nom.)

RP

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –

1Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters. *Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads. 2 Operating position in any direction except pull.


MICRO SWITCH™ General Purpose Limit Switches O.T. • Operating torqueO.F. • Operating forceR.P. • Release pointP.T. • PretravelO.T. • OvertravelD.T. • Differential travel1Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters.

*Requires an 18PA1 Terminal Block (base receptacle) which must be ordered separately. 18PA1 terminal block has 0.5-14 NPT conduit threads.

Table 11. Side Rotary with Face Plate


conduitPlug-in less base Description

Electrical Rating

(Table 2)

Operating Torque or


Pretravel (max.)

Overtravel (min.)


(max.)Notes

7LS1 –Face plate with 1LS1 for enclosure installation with 38,1 mm [1.5 in] fixed

lever, steel rollerA

0,51 Nm [4.5 in-lb]

TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –

1Contact closed n; Contact open o.




Electrical Rating

(Table 2)

Operating Torque or

ForceBar Chart1 Operate Point2 (max.)

Pretravel (max.)

Overtravel (nom.)


(max.)Notes

8LS1 208LS1Wobble actuated, random motion 141 mm [5.55 in] tin plated, coil spring

steelD

1,39 N [5.0 oz]

TT

1-23-4

0 28,659,3

3-41-2

OPFP

(nom.)

RP

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –

8LS1-L –Wobble actuated, random motion 141 mm [5.55 in] tin plated, coil spring

steelH

1,39 N [5.0 oz]

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– UL & CSA

8LS3 208LS3 Wobble actuated, random motion 141 mm [5.55 in] aluminum rod D1,39 N [5.0 oz]

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –

8LS125 208LS125Wobble actuated, random motion 191 mm [7.53 in] stainless steel cat whis-

kerD

0,28 N [1.0 oz]

TT

1-23-4

0 63,5127

3-41-2

OPFP

(nom.)

RP

63,5 mm[2.5 in]

63,5 mm[2.5 in]

63,5 mm[2.5 in]

– –

8LS152 208LS152 Wobble actuated, random motion 141 mm [5.55 in] stainless steel coil spring D1,39 N [5.0 oz]

TT

1-23-4

0 28,659,3

3-41-2

OPFP

(nom.)

RP

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –



LS SeriesMICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR EMEA/EUROPE)For listings not shown, contact your Honeywell representative.


Compact 20 mm conduit

Compact PG 13,5 conduit

Plug-in less base*


Rating(Table 2)



(max.)Overtravel

(min.)


(max.)Notes

1LS1-4C 1LS1-4PG 201LS1-4 Side rotary, with 38,1 mm [1.5 in] fixed lever, steel roller J 0,51 Nm [4.5 in-lb]

TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –

1LS2-4C 1LS2-4PG 201LS2-4 Side rotary, no lever J 0,51 Nm [4.5 in-lb] – 20° 30° 12° –

1LS243-4C 1LS243-4PG – Side rotary, with 38,1 mm [1.5 in] fixed lever, steel roller J 0,51 Nm [4.5 in-lb] – 20° 30° 12° High temp. 120 °C [248 °F]

1LS244-4C 1LS244-4PG – Side rotary, with 38,1 mm [1.5 in] fixed lever, steel roller J 0,51 Nm [4.5 in-lb] – 20° 30° 12°High temp. 120 °C [248 °F],

fluorcarbon o-rings


TT

1-23-4

0° 5° 35°

3-41-2

OPFPDT = 4°

1°

– 5° 30° 4° Low pretravel

1LS56-4C 1LS56-4PG 201LS56-4 Side rotary, lever J 0,19 Nm [1.7 in-lb] – 5° 30° 4° Low pretravel & low torque

1Contact closed n; Contact open o. * Requires an 18PA1-4C Terminal Block (20 mm conduit threads) or 18PA1-4PG Terminal Block (PG13,5 conduit threads) ordered separately. Terminal block is base receptacle.

Table 14. Side Rotary (Maintained), Fork Roller Lever



Plug-in less base*


Rating(Table 2)



(max.)Total Travel

(nom.)


(max.)Notes

6LS1-4C 6LS1-4PG 206LS1-4Side rotary maintained with 38,1 mm fork lever with

steel rollers, opp. sideJ 0,33 Nm [3.01 in-lb]

TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 55° 90° 20° –

6LS3-4C 6LS3-4PG –Side rotary maintained with 38,1 mm fork lever with

nylon rollers, same sideJ 0,33 Nm [3.01 in-lb] – 55° 90° 20° –

6LS2-4C 6LS2-4PG – Side rotary maintained, no lever J 0,33 Nm [3.01 in-lb] – 55° 90° 20° –





Plug-in less base*


Rating(Table 2)



(max.)Overtravel

(min.)


(max.)Notes

1LS3-4C 1LS3-4PG 201LS3-4Side rotary, with 25 mm to 89 mm [1.0 in to 3.5 in] adjustable

lever, nylon rollerJ 0,51 Nm [4.5 in-lb] TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –



MICRO SWITCH™ General Purpose Limit Switches O.T. • Operating torqueO.F. • Operating forceR.P. • Release pointP.T. • PretravelO.T. • OvertravelD.T. • Differential travelTable 13. Side Rotary (Momentary), Standard Roller Lever



Plug-in less base*


Rating(Table 2)



(max.)Overtravel

(min.)


(max.)Notes


TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –

1LS2-4C 1LS2-4PG 201LS2-4 Side rotary, no lever J 0,51 Nm [4.5 in-lb] – 20° 30° 12° –

1LS243-4C 1LS243-4PG – Side rotary, with 38,1 mm [1.5 in] fixed lever, steel roller J 0,51 Nm [4.5 in-lb] – 20° 30° 12° High temp. 120 °C [248 °F]

1LS244-4C 1LS244-4PG – Side rotary, with 38,1 mm [1.5 in] fixed lever, steel roller J 0,51 Nm [4.5 in-lb] – 20° 30° 12°High temp. 120 °C [248 °F],

fluorcarbon o-rings


TT

1-23-4

0° 5° 35°

3-41-2

OPFPDT = 4°

1°


1LS56-4C 1LS56-4PG 201LS56-4 Side rotary, lever J 0,19 Nm [1.7 in-lb] – 5° 30° 4° Low pretravel & low torque


Table 14. Side Rotary (Maintained), Fork Roller Lever



Plug-in less base*


Rating(Table 2)



(max.)Total Travel

(nom.)


(max.)Notes

6LS1-4C 6LS1-4PG 206LS1-4Side rotary maintained with 38,1 mm fork lever with

steel rollers, opp. sideJ 0,33 Nm [3.01 in-lb]

TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 55° 90° 20° –

6LS3-4C 6LS3-4PG –Side rotary maintained with 38,1 mm fork lever with

nylon rollers, same sideJ 0,33 Nm [3.01 in-lb] – 55° 90° 20° –

6LS2-4C 6LS2-4PG – Side rotary maintained, no lever J 0,33 Nm [3.01 in-lb] – 55° 90° 20° –





Plug-in less base*


Rating(Table 2)



(max.)Overtravel

(min.)


(max.)Notes

1LS3-4C 1LS3-4PG 201LS3-4Side rotary, with 25 mm to 89 mm [1.0 in to 3.5 in] adjustable

lever, nylon rollerJ 0,51 Nm [4.5 in-lb] TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12° –



LS SeriesMICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR EMEA/EUROPE)For listings not shown, contact your Honeywell representative.




Plug-in less base*


Rating(Table 2)



(max.)Overtravel

(min.)


(max.)Notes

1LS10-4C 1LS10-4PG 201LS10-4 Side rotary with 140 mm [5.5 in] max. adjustable aluminum rod J 0,51 N m [4.5 in-lb] TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12°

1LS47-4PG – – Side rotary with 140 mm [5.5 in] max. adjustable alumnum rod J 0,51 N m [4.5 in-lb] TT

1-23-4

0° 5° 35°

3-41-2

OPFPDT = 4°

1°






Plug-in less base*


Rating(Table 2)

Operating Torque or

ForceBar Chart1



(max.)Overtravel

(min.)


(max.)Notes

2LS1-4C 2LS1-4PG 202LS1-4 Top pin plunger (SST) J31,4 N [7.06 lb]

TT

1-23-4

35,5 33,8 27,43

3-41-2

OPFPDT = 0,50

34,29

35,5 mm[1.40 in]

33,8 mm ±0,7 mm [1.33 in ±0.03 in]

1,70 mm [0.067 in]

6,40 mm [0.252 in]

0,50 mm [0.02 in]

– 2LS1-4GPG – Top pin plunger (SST) F31,4 N [7.06 lb]

35,5 mm[1.40 in]

33,8 mm ±0,7 mm [1.33 in ±0.03 in]

1,70 mm [0.067 in]

6,40 mm [0.252 in]

0,50 mm [0.02 in]

Gold-plated contacts, low-energy loads

2LS1-4CN151 – – Top pin plunger (SST) J31,4 N [7.06 lb]

35,5 mm[1.40 in]

33,8 mm ±0,7 mm [1.33 in ±0.03 in]

1,70 mm [0.067 in]

6,40 mm [0.252 in]

0,50 mm [0.02 in

High temperature, 150 °C [302 °F]

1Contact closed n; Contact open o. NOTE: Bar chart measurements are in millimeters. * Requires an 18PA1-4C Terminal Block (20 mm conduit threads) or 18PA1-4PG Terminal Block (PG13,5 conduit threads) ordered separately. Terminal block is base receptacle.




Plug-in less base*


Rating(Table 2)

Operating Torque or

ForceBar Chart1



(max.)Overtravel

(min.)


(max.)Notes

5LS1-4C 5LS1-4PG 205LS1-4 Top roller plunger (SST) J31,4 N [7.06 lb]

TT

1-23-4

45,7 44,0 38,35

3-41-2

OPFPDT = 0,51

44,46

45,7 mm[1.80 in]

44,0 mm ±0,7 mm [1.73 in ±0.03 in]

1,70 mm [0.067 in]

5,56 mm [0.219 in]

0,50 mm [0.02 in]

–5LS1-G-

4PG– Top roller plunger (SST) F

31,4 N [7.06 lb]

45,7 mm[1.80 in]

44,0 mm ±0,7 mm [1.73 in ±0.03 in]

1,70 mm [0.067 in]

5,56 mm [0.219 in]

0,50 mm [0.02 in]


5LS1-4CN152 – – Top roller plunger (SST) J31,4 N [7.06 lb]

45,7 mm[1.80 in]

44,0 mm ±0,7 mm [1.73 in ±0.03 in]

1,70 mm [0.067 in]

5,56 mm [0.219 in]

0,50 mm [0.02 in]




MICRO SWITCH™ General Purpose Limit Switches O.T. • Operating torqueO.F. • Operating forceR.P. • Release pointP.T. • PretravelO.T. • OvertravelD.T. • Differential travelTable 16. Side Rotary, Adjustable Rod Lever



Plug-in less base*


Rating(Table 2)



(max.)Overtravel

(min.)


(max.)Notes

1LS10-4C 1LS10-4PG 201LS10-4 Side rotary with 140 mm [5.5 in] max. adjustable aluminum rod J 0,51 N m [4.5 in-lb] TT

1-23-4

0° 20° 50°

3-41-2

OPFPDT = 12°

8°

– 20° 30° 12°

1LS47-4PG – – Side rotary with 140 mm [5.5 in] max. adjustable alumnum rod J 0,51 N m [4.5 in-lb] TT

1-23-4

0° 5° 35°

3-41-2

OPFPDT = 4°

1°






Plug-in less base*


Rating(Table 2)

Operating Torque or

ForceBar Chart1



(max.)Overtravel

(min.)


(max.)Notes

2LS1-4C 2LS1-4PG 202LS1-4 Top pin plunger (SST) J31,4 N [7.06 lb]

TT

1-23-4

35,5 33,8 27,43

3-41-2

OPFPDT = 0,50

34,29

35,5 mm[1.40 in]

33,8 mm ±0,7 mm [1.33 in ±0.03 in]

1,70 mm [0.067 in]

6,40 mm [0.252 in]

0,50 mm [0.02 in]

– 2LS1-4GPG – Top pin plunger (SST) F31,4 N [7.06 lb]

35,5 mm[1.40 in]

33,8 mm ±0,7 mm [1.33 in ±0.03 in]

1,70 mm [0.067 in]

6,40 mm [0.252 in]

0,50 mm [0.02 in]


2LS1-4CN151 – – Top pin plunger (SST) J31,4 N [7.06 lb]

35,5 mm[1.40 in]

33,8 mm ±0,7 mm [1.33 in ±0.03 in]

1,70 mm [0.067 in]

6,40 mm [0.252 in]

0,50 mm [0.02 in






Plug-in less base*


Rating(Table 2)

Operating Torque or

ForceBar Chart1



(max.)Overtravel

(min.)


(max.)Notes

5LS1-4C 5LS1-4PG 205LS1-4 Top roller plunger (SST) J31,4 N [7.06 lb]

TT

1-23-4

45,7 44,0 38,35

3-41-2

OPFPDT = 0,51

44,46

45,7 mm[1.80 in]

44,0 mm ±0,7 mm [1.73 in ±0.03 in]

1,70 mm [0.067 in]

5,56 mm [0.219 in]

0,50 mm [0.02 in]

–5LS1-G-

4PG– Top roller plunger (SST) F

31,4 N [7.06 lb]

45,7 mm[1.80 in]

44,0 mm ±0,7 mm [1.73 in ±0.03 in]

1,70 mm [0.067 in]

5,56 mm [0.219 in]

0,50 mm [0.02 in]


5LS1-4CN152 – – Top roller plunger (SST) J31,4 N [7.06 lb]

45,7 mm[1.80 in]

44,0 mm ±0,7 mm [1.73 in ±0.03 in]

1,70 mm [0.067 in]

5,56 mm [0.219 in]

0,50 mm [0.02 in]




LS Series

Table 19. Side Plunger



Plug-in less base*


Rating(Table 2)

Operating Torque or

ForceBar Chart1



(max.)Overtravel

(min.)


(max.)Notes

4LS1-4C 4LS1-4PG 204LS1-4 Side pin plunger (SST) J40,1 N [9.01 lb]

TT

1-23-4

57,27 54,5 48,94

3-41-2

OPFPDT = 1,0

55,5

57,27 mm54,5 mm ±1,2 mm[2.15 in ±0.047 in]

2,77 mm[0.109 in]

5,56 mm [0.219 in]

1,0 mm[0.039 in]

–

3LS1-4C 3LS1-4PG 203LS1-4 Side roller plunger (SST) J40,1 N [9.01 lb]

TT

1-23-4

70,37 67,6 62,04

3-41-2

OPFPDT = 1,0

68,6

70,37 mm67,6 mm ±1,2 mm[2.66 in ±0.047 in]

2,77 mm[0.109 in]

5,56 mm [0.219 in]

1,0 mm[0.039 in]

Roller plunger may be locked in a position through 360°





Plug-in less base*


Rating(Table 2)


Bar Chart1 Operate Point2Pretravel

(max.)Overtravel

(min.)


(max.)Notes

8LS1-4C 8LS1-4PG 208LS1-4Wobble, random motion 141 mm [5.55 in]

stranded steel cable J 1,39 N [5.0 oz]

TT

1-23-4

0 28,659,3

3-41-2

OPFP

(nom.)

RP

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –

8LS3-4C 8LS3-4PG 208LS3-4Wobble actuated, random motion 141 mm [5.55 in]

aluminum rodJ 1,39 N [5.0 oz]

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –


stainless steel cat whiskerJ 0,28 N [1.0 oz] TT

1-23-4

0 63,5127

3-41-2

OPFP

(nom.)

RP

63,5 mm[2.5 in]

63,5 mm[2.5 in]

63,5 mm[2.5 in]

– –


stainless steel coil springJ 1,39 N [5.0 oz] TT

1-23-4

0 28,659,3

3-41-2

OPFP

(nom.)

RP

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –


MICRO SWITCH™ LS SERIES ORDER GUIDE/RECOMMENDED LISTINGS (FOR EMEA/EUROPE)For listings not shown, contact your Honeywell representative.


MICRO SWITCH™ General Purpose Limit Switches O.T. • Operating torqueO.F. • Operating forceR.P. • Release pointP.T. • PretravelO.T. • OvertravelD.T. • Differential travelTable 19. Side Plunger



Plug-in less base*


Rating(Table 2)

Operating Torque or

ForceBar Chart1



(max.)Overtravel

(min.)


(max.)Notes

4LS1-4C 4LS1-4PG 204LS1-4 Side pin plunger (SST) J40,1 N [9.01 lb]

TT

1-23-4

57,27 54,5 48,94

3-41-2

OPFPDT = 1,0

55,5

57,27 mm54,5 mm ±1,2 mm[2.15 in ±0.047 in]

2,77 mm[0.109 in]

5,56 mm [0.219 in]

1,0 mm[0.039 in]

–

3LS1-4C 3LS1-4PG 203LS1-4 Side roller plunger (SST) J40,1 N [9.01 lb]

TT

1-23-4

70,37 67,6 62,04

3-41-2

OPFPDT = 1,0

68,6

70,37 mm67,6 mm ±1,2 mm[2.66 in ±0.047 in]

2,77 mm[0.109 in]

5,56 mm [0.219 in]

1,0 mm[0.039 in]

Roller plunger may be locked in a position through 360°





Plug-in less base*


Rating(Table 2)


Bar Chart1 Operate Point2Pretravel

(max.)Overtravel

(min.)


(max.)Notes

8LS1-4C 8LS1-4PG 208LS1-4Wobble, random motion 141 mm [5.55 in]

stranded steel cable J 1,39 N [5.0 oz]

TT

1-23-4

0 28,659,3

3-41-2

OPFP

(nom.)

RP

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –


aluminum rodJ 1,39 N [5.0 oz]

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –


stainless steel cat whiskerJ 0,28 N [1.0 oz] TT

1-23-4

0 63,5127

3-41-2

OPFP

(nom.)

RP

63,5 mm[2.5 in]

63,5 mm[2.5 in]

63,5 mm[2.5 in]

– –


stainless steel coil springJ 1,39 N [5.0 oz] TT

1-23-4

0 28,659,3

3-41-2

OPFP

(nom.)

RP

28,6 mm[1.125 in]

28,6 mm[1.125 in]

30,7 mm[1.21 in]

– –



LS Series

Table 21. Terminal Block, Base Receptacle

Plug-in less base*

Description

18PA1 Terminal block (base receptacle) with 0.5-14 NPT conduit thread. For use with 200LS Series

18PA1-4C Terminal block (base receptacle) with 20 mm conduit threads. For use with 200LS-4 Series

18PA1-4PG Terminal block (base receptacle) with PG13,5 conduit threads. For use with 200LS-4 Series

Table 22. Replacement Levers for Side Rotary Switches

Catalog Listing (North America)

Catalot Listing (EMEA/Europe)

Description

LSZ51D 6PA78-4 Replacement lever for most 1LS switches with fixed length 38,1 mm lever with Ø19 mm steel roller

LSZ52C 6PA44-4 Replacement lever for most 1LS switches w adj. length 38 mm to 90 mm lever with Ø19 mm nylon roller

LSZ54M 6PA43-4 Replacement aluminum rod lever for most 1LS switches w adj. rod with max. length 140 mm

6PA80 6PA80-4 Replacement fork lever for 6LS switches w steel rollers on opposite side

6PA102 6PA102-4 Replacement fork lever for 6LS switches w nylon rollers on same side

6PA82 Fork lever for 6LS switches w steel rollers on same side

LSZ52D Adjustable length lever 38 mm to 90 mm w Ø19 mm steel roller

LSZ52J Adjustable length lever 38 mm to 90 mm w Ø25,4 mm nylon roller

LSZ52K Adjustable length lever 38 mm to 90 mm w Ø38,1 mm nylon roller

LSZ52M Adjustable length lever 38 mm to 90 mm w Ø50,8 mm rubber roller

LSZ52Y Adjustable length lever 38 mm to 90 mm w Ø50,8 mm nylon roller

6PA71 Fixed length lever, 38,1 mm length w Ø19 mm nylon roller

6PA121 Fixed length lever, 38,1 mm length w Ø19 mm steel roller

LSZ51L Fixed length lever, 38,1 mm length w Ø19 mm ball bearing steel roller

6PA144 Fixed length lever, 38,1 mm length w Ø19 mm ball bearing steel roller

6PA63 Adjustable stainless steel rod lever, 330 mm max. length

6PA69 Adjustable stainless steel spring rod lever, 127 mm to 190 mm

6PA57 Manually operated Ø38,1mm aluminum button on a 68,1 mm metal lever



Table 23. Replacement Parts (North America Products) Contact Block

Contact Block

Catalog Listing

Compact Plug-inOperating

HeadActuator/

Lever

1LS1-L 2MN1-L – 9PA15 LSZ51D

1LS1 201LS1

2MN1 2MN6 9PA15 LSZ51D

1LS2-L 2MN1-L – 9PA16* Note 1

1LS2 201LS2

2MN1 2MN6 9PA16* Note 1

1LS3-L 2MN1-L – – –

1LS3 201LS3

2MN1 2MN6 9PA16* LSZ52C

1LS6 201LS6

2MN1 2MN6 – LSZ51D

1LS9 201LS9


1LS10-L 2MN1-L – – LSZ54M

1LS10 201LS10

2MN1 2MN6 – LSZ54M

1LS19 201LS19


1LS23 201LS23


1LS47 201LS47


1LS53 201LS51


1LS56 201LS56


1LS58 2MN8 – 9PA16* LSZ52C

1LS59 2MN8 – 9PA74* LSZ52C

1LS131 2MN8 – 9PA74* 6PA121

1LS501 201LS501


* Furnished without actuator¹ Any auxiliary lever listed can be used ² LSZ54M, 6PA63, 6PA71 or 6PA121 levers only recommended for these catalog listings

Table 24. Replacement Parts (North America Products)

Contact Block

Contact Block

Catalog Listing

Compact Plug-inOperating

HeadActuator/

Lever

2LS1-L 2MN1-L – 9PA32 Included w operating

head2LS1

201LS12MN1 2MN6 9PA32

2LS111 201LS111

2MN3 2MN7 – –

3LS1203LS1

2MN11 2MN9 9PA45

Included w operating

head

4LS1204LS1

2MN11 2MN9 9PA44

5LS1-L 2MN1-L – 9PA33

5LS1205LS1

2MN1 2MN6 9PA33

6LS1 206LS1

2MN1 2MN6 9PA47* 6PA80

6LS2-L 2MN1-L – 9PA47* Note 3

6LS2 206LS2


6LS3 2MN1 – 9PA47* 6PA102

7LS1 2MN1 – 9PA15 LSZ51D

8LS1-L 2MN11-L – 9PA58

Included w operating

head

8LS1 208LS1

2MN11 2MN9 9PA58

8LS3 208LS3

2MN1 2MN6 9PA49

8LS125 208LS125

2MN11 2MN9 9PA54

8LS152 208LS152

2MN1 2MN6 9PA42

* Furnished without actuator3 Fork lever actuators recommended for two position side rotary main-tained


LS Series

Table 25. Replacement Parts (European Products)

Contact Block

Catalog Listing

LS

Catalog Listing200 LS

Basic Switch(com-pact only)

Operating Head

Actuator/ Lever

1LS1-4C 201LS1-4 2MN1-M 9PA15-4 6PA78-4

1LS2-4C 201LS2-4 2MN1-M 9PA16-4 –

1LS3-4C 201LS3-4 2MN1-M 9PA16-4 6PA44-4

1LS10-4C 201LS10-4 2MN1-M 9PA40-4 6PA43-4

1LS19-4C 201LS19-4 – 9PA15-4 6PA78-4

1LS23-4C – 2MN1-M – –

1LS47-4C – – 9PA40-4 6PA43-4

1LS56-4C 201LS56-4 – 9PA74- *

1LS243-4C – – 914PA15 6PA78-4

1LS244-4C – – 914PA15 6PA78-4

2LS1-4C 202LS1-4 2MN1-M 9PA32-4 Included with

operating head

3LS1-4C 203LS1-4 – 9PA45-4

4LS1-4C 204LS1-4 – 9PA44-4

5LS1-4C 205LS1-4 2MN1-M 9PA33-4

6LS1-4C 206LS1-4 2MN1-M 9PA46-4 6PA80-4

6LS2-4C 206LS2-4 2MN1-M 9PA47-4 –

6LS3-4C – 2MN1-M 9PA47-4 6PA102-4

8LS1-4C 208LS1-4 2MN1-M 9PA58-4 Included with

operating head

8LS3-4C 208LS3-4 2MN1-M 9PA49-4

8LS125-4C 208LS125-4 2MN1-M 9PA54-4

8LS152-4C 208LS152-4 2MN1-M 9PA42-4

Note: Operating head includes lever where appropriate and internal plunger.* Because of low operating force, 6PA43-4, 6PA71-4, or 6PA78-4 auxil-iary actuators only are recommended for these listings.



DIMENSIONAL DRAWINGS

Figure 1. 1LS1 Dimensions

28,7[1.13]

26,16 [1.03]

40,64 [1.6]30,23[1.19] 57,15 ±0,762

[2.25 ±0.030]

15,09 ±0,38[0.594 ±0.015]

14,68 ±0,762 [0.578 ±0.030]

4,83[0.19]

15,24[0.6]

25,4[1.00]

68,58[2.70]

58,67[2.31]

13,46[0.53]

1/4-20 UNC mod thread x 14,27 [0.562 ] min. depth (4)

Ø 4,88 [0.192] min.mounting hole for No. 10 screw (4)

4,83 [0.19]

40 [1.57]

38,1 to 88,9[1.5 to 3.5]

adjustable length

Ø 19,05 x 6,35 wide[Ø 0.75 x 0.25 wide]

nylon roller

60,71 ±1,53[2.39 ±0.06]

50,29 ±1,53[1.98 ±0.06]

28,7 [1.13]

26,16 [1.03]

40,64 [1.6]30,23[1.19]

15,09 ±0,38[0.594 ±0.015]

14,68 ±0,762 [0.578 ±0.030]

4,83[0.19]

25,4[1.00]



4,83 [0.19]

58,67[2.31] 68,58

[2.70]

13,46 [0.53]

40 [1.57]



141,22[5.56] max.(adjustable)

3,18 [0.125] aluminum lever

28,7[1.13]

26,16 [1.03]

40,64 [1.6]30,23[1.19] 53,09 ±0,762

[2.09 ±0.030]

15,09 ±0,38[0.594 ±0.015]

14,68 ±0,762 [0.578 ±0.030]

4,83 [0.19]15,24[0.6]

25,4[1.00]

68,58[2.70]

58,67[2.31]

13,46[0.53]



4,83 [0.19]

43,18[1.70]6,35

[0.25]

40 [1.57]


40 [1.57]

20,57 [0.81]33,78 ±0,762[1.33 ±0.03]

operating position

1,65[0.065] max.

pretravel

Corrosion-resistantsteel plunger

13,21 [0.52]

28,7[1.13]

26,16 [1.03]

40,64 [1.6]30,23[1.19]

4,83[0.19]

58,67[2.31]

13,46[0.53]



4,83 [0.19]

68,58[2.70]

26,16 [1.03]

15,24[0.6]


Ø 25,91[Ø 1.02]

17,78[0.7]

Captive coverscrew (3)

54,10 ±0,762[2.13 ±0.03]

operating position

2,77 [0.109] max. pretravel

28,7[1.13]

26,16 [1.03]

40,64 [1.6]30,23[1.19] 46,48 ±0,762

[1.83 ±0.030]

15,09 ±0,38[0.594 ±0.015]

4,83[0.19]

25,4[1.00]

68,58[2.70]

58,67[2.31]

13,46[0.53]



4,83 [0.19]

40 [1.57]


40 [1.57]

.6

40,64 ±0,762[1.60 ±0.03]

operating position

2,77 [0.109]max. pretravel

Ø 25,91[Ø 1.02]

17,78[0.7]


28,7[1.13]

26,16 [1.03]

40,64 [1.6]30,23[1.19] 46,48 ±0,762

[1.83 ±0.030]

15,09 ±0,38[0.594 ±0.015]

4,83[0.19]

25,4[1.00]

68,58[2.70]

58,67[2.31]

13,46[0.53]



4,83 [0.19]


LS Series


.6

27,94[1.10]

43,94 ±0,762[1.73 ±0.03]

operating position

1,65 [0.065]max. pretravel Ø 16,66 [Ø 0.656] x

4,78 [0.188] widecorrosion-resistantsteel roller and plunger


28,7[1.13]

26,16 [1.03]

40,64 [1.6]30,23[1.19]

4,83[0.19]

68,58[2.70]58,67

[2.31]

13,21 [0.52]



4,83 [0.19]

16,76 [0.66]

40 [1.57]


58,42 [2.30]

46,23 [1.82]

34,29[1.35]

13,97 [0.55]

51,31 [2.02]

38,1[1.50] R

28,7[1.13]

26,16 [1.03]

40,64 [1.6]30,23[1.19]

15,09 ±0,38[0.594 ±0.015]

14,68 ±0,762 [0.578 ±0.030]

4,83[0.19]

15,24[0.6]

68,58[2.70]

58,67[2.31]

1/4-20 UNC mod thread x 14,27 [0.562] min. depth (4)


4,83 [0.19]

13,46 [0.53]

Ø 19,05 x 6,35 wide[Ø 0.75 x 0.25 wide]hardened steel roller

40 [1.57]


3,05[0.12] 31,75

[1.25]

1,52 [0.06]

30,99[1.22]

50,8[2.00]

19,05[0.75]

6,35[0.25]

25,4[1.0]

79,76[3.14]

88,9[3.50]

5,08[Ø 0.20]hole (4)

6,35[0.25]

102[4.03]

63,5 [2.50]



35,05[1.38]

Ø 4,8 [0.189] stranded steelcable actuator

15,09 [0.594]

140,97[5.55]

15,24[0.6]

Switch will operate bymoving actuator in anydirection except pull

28,7[1.13]

40,64 [1.6]

30,23[1.19]

4,83[0.19]

58,67[2.31]



4,83 [0.19]

40 [1.57]

35,05[1.38]

Ø 4,8 [0.189] deep anodizedaluminum rodpressed in coil spring

140,97[5.55]


15,09 [0.594]

15,24[0.6]


30,23[1.19]

4,83[0.19]


4,83 [0.19]

40 [1.57]

28,7[1.13]

40,64 [1.6]

58,67[2.31]





37,49 [1.476]

91,54 [3.604]

4,57[0.18]

18,8[0.74]

67,67[2.664]

79,38 [3.125]

87,25 [3.435]

38,1[1.50]

6,35[0.25]29,72

[1.17]12,7 [0.50]34,29 [1.35]

26,16 [1.03]

14,68 ±0,762 [0.578 ±0.030]

25,4[1.00]


77,5[3.05]

48,8 [1.92]


35,05[1.38]

Ø 1,02 [0.04] spring wiretreated forcorrosionresistance

191,26[7.53]


15,09 [0.594]

15,24[0.6]


30,23[1.19]

4,83[0.19]


4,83 [0.19]

40 [1.57]

28,7[1.13]

40,64 [1.6]

58,67[2.31]



35,05[1.38]

Ø 6,7 [0.26] coiled stainlesssteel springactuator

140,97[5.55]


15,09 [0.594]

15,24[0.6]


30,23[1.19]

4,83[0.19]


4,83 [0.19]

40 [1.57]

28,7[1.13]

40,64 [1.6]

58,67[2.31]



77,47[3.05]

15,24[0.60]

57,15[2.25]

60,33 [2.375]

49,91 [1.965]

13,21 [0.52]

37,49 [1.476]

4,57[0.18]

18,8[0.74]

67,67[2.664]

6,35[0.25]29,72

[1.17]12,7 [0.50]

34,29 [1.35]

26,16 [1.03]

14,68 ±0,762 [0.578 ±0.030]

25,4[1.00]


Ø 19,05 x 6,35 wide[Ø 0.75 x 0.25 wide]nylon roller

48,8 [1.92]


LS Series


87,25 [3.435]

34,29[1.35]

43,18 [1.7]

Ø 6,53 [0.26]Mtg Hole(Thru) (2)

77,45[3.05]

57,15[2.25]

37,49 [1.476]

4,57[0.18]

18,8[0.74]

67,67[2.664]

6,35[0.25]29,72

[1.17]12,7 [0.50]

26,16 [1.03]

25,4[1.00]


141,22[5.56] max.(adjustable)

3,18 [0.125] aluminum lever

6,35[0.25]

48,8 [1.92]

15,24 [0.60]


5,08[0.20]

Ø 16,76 [0.66]

Ø 9,07 [0.36]

47,37 [1.87]

13,08[0.52]

33,78 ±0,762[1.33 ±0.03]

operating position

1,65[0.065] max.

pretravel


26,16 [1.03]

34,29[1.35]

Ø 6,53 [0.26]Mtg Hole(Thru) (2)

77,45[3.05]

15,24 [0.60]

57,15[2.25]

37,49 [1.476]

4,57[0.18]

18,8[0.74]

67,67[2.664]

6,35[0.25]29,72

[1.17]12,7 [0.50]

1/4-20 UNC mod thread x 14,27 [0.562 ] min. depth (3) 48,8 [1.92]



90,93 [3.58]

29,72[1.17]

25,4[1.00]

17,8[0.7]

40,64 [1.60]operating position

2,77[0.109] max.

pretravel

26,16 [1.03]

34,29[1.35]

Ø 6,53 [0.26]Mtg Hole(Thru) (2)

77,45[3.05]

57,15[2.25]

37,49 [1.476]

4,57[0.18]

18,8[0.74]

67,67[2.664]

6,35[0.25]

12,7 [0.50]


13,21 [0.52]

15,24 [0.60]

48,8 [1.92]

104,14 [4.10]

27,94[1.1]

13,08 [0.52]

47,37 [1.865]

17,78[0.7]

54,10 ±0,762[2.13 ±0.03]

operating position

2,77 [0.109] max. pretravel

26,16 [1.03]

34,29[1.35]

Ø 6,53 [0.26]Mtg Hole(Thru) (2)

77,45[3.05]

57,15[2.25]

37,49 [1.476]

4,57[0.18]

18,8[0.74]

67,67[2.664]

6,35[0.25]29,72

[1.17]12,7 [0.50]


15,24 [0.60]

48,8 [1.92]


27,94[1.10]

5,08[0.20]

47,37 [1.87]

26,16 [1.03]

34,29[1.35]

Ø 6,53 [0.26]Mtg Hole(Thru) (2)

77,45[3.05]

57,15[2.25]

4,57[0.18]

18,8[0.74]

67,67[2.664]

6,35[0.25]29,72

[1.17] 12,7 [0.50]


43,94 ±0,762[1.73 ±0.03]

operating position

1,65 [0.065]max. pretravel Ø 16,66 [Ø 0.656] x

4,78 [0.188] widecorrosion-resistantsteel roller and plunger

13,21 [0.52]

16,76 [0.66]

15,24 [0.60]

37,49 [1.476]

48,8 [1.92]

Figure 19. 206LS1 Dimensions64,39[2.535]

34,29[1.35]

92,2 [3.63]

46,23 [1.82]

13,97 [0.55]

38,1[1.50] R

26,16 [1.03]

14,68 ±0,762 [0.578 ±0.030]

Ø 19,05 x 6,35 wide[Ø 0.75 x 0.25 wide]hardened steel roller

5,08[0.20]

34,29[1.35]

Ø 6,53 [0.26]Mtg Hole(Thru) (2)

77,45[3.05]

15,24 [0.60]

57,15[2.25]

37,49 [1.476]

4,57[0.18]

18,8[0.74]

67,67[2.664]

6,35[0.25]29,72

[1.17]12,7 [0.50]

1/4-20 UNC mod thread x 14,27 [0.562] min. depth (3) 48,8 [1.92]




47,37[1.865]


140,97[5.55]


34,29[1.35]

77,45[3.05]

57,15[2.25]

37,49 [1.476]

4,57[0.18]

18,8[0.74]

67,67[2.664]

6,35[0.25]29,72

[1.17]12,7 [0.50]


Ø 6,53 [0.26]Mtg Hole(Thru) (2)

15,24 [0.60]

48,8 [1.92]


47,37[1.865]

Ø 4,8 [0.189] deep anodized aluminum rod pressed in coil spring

140,97[5.55]


34,29[1.35]

77,45[3.05]

57,15[2.25]

37,49 [1.476]

4,57[0.18]

18,8[0.74]

67,67[2.664]

6,35[0.25]29,72

[1.17]12,7 [0.50]


Ø 6,53 [0.26]Mtg Hole(Thru) (2)

15,24 [0.60]

48,8 [1.92]


47,37[1.865]

34,29[1.35]

77,45[3.05]

57,15[2.25]

37,49 [1.476]

4,57[0.18]

18,8[0.74]

67,67[2.664]

6,35[0.25]29,72

[1.17]12,7 [0.50]


Ø 6,53 [0.26]Mtg Hole(Thru) (2)

15,24 [0.60]

48,8 [1.92]

Ø 1,02 [0.04] spring wiretreated for corrosionresistance

191,26[7.53]

Switch will operateby moving actuator in any direction except pull


47,37[1.865]

140,97[5.55]


34,29[1.35]

77,45[3.05]

57,15[2.25]

37,49 [1.476]

4,57[0.18]

18,8[0.74]

67,67[2.664]

6,35[0.25]29,72

[1.17]12,7 [0.50]


Ø 6,53 [0.26]Mtg Hole(Thru) (2)

15,24 [0.60]

48,8 [1.92]

Ø 6,7 [0.26] coiled stainless steel springactuator


LS Series

Figure 25. 1LS3-4 Dimensions

40 [1.57]

30,2[1.19]

15,8[0.62]

14,7 [0.58]

70[2.75]

21,5[0.85]

58,7[2.31]

1,3[0.05] (2)

38[1.5]

5,2[0.20] (2)

26 [1.02]

13,5[0.53]

26 [1.02]

35 [1.38]

Ø 5,2[Ø 0.20] (2)

mounting holes

58,5 [2.30]

33,0[1.3]

40,5 [1.59]

Ø 19,05 x 6,35 wide[Ø 0.75 x 0.25 wide]

hardened steel roller

40 [1.57]


40 [1.57]

30,2[1.19]

15,8[0.62]

14,7 [0.58]

70[2.75]

21,5[0.85]

58,7[2.31]

1,3[0.05] (2)

38[1.5]

5,2[0.20] (2)

26 [1.02]

13,5[0.53]

26 [1.02]

35 [1.38]

Ø 5,2[Ø 0.20] (2)

mounting holes

58,5 [2.30]

33,0[1.3]

40,5 [1.59]

Ø 19,05 x 6,35 wide[Ø 0.75 x 0.25 wide]


40 [1.57]


20,6[0.81]

33,8[1.33

9,01 [0.35]

98,6[3.88]

1,7[0.067]

16,8[0.66]

40 [1.57]

30,2[1.19]

15,8[0.62]

70[2.75]

21,5[0.85]

58,7[2.31]

1,3[0.05] (2)

5,2[0.20] (2)

13,5 [0.53]

35 [1.38]

Ø 5,2[Ø 0.20] (2)

mounting holes

40 [1.57]


26 [1.02]

26 [1.02]


96[3.78]

46,5 [1.83]

18,3[0.72]

Corrosion-resistant

steel plunger

9[0.35]

40 [1.57]

30,2[1.19]

15,8[0.62]

70[2.75]

21,5[0.85]

58,7[2.31]

1,3[0.05] (2)

5,2[0.20] (2)

26 [1.02] 13,5[0.53]

35 [1.38]

Ø 5,2[Ø 0.20] (2)

mounting holes

40 [1.57]

2,77 [0.109]max. pretravel

Ø 25,91[Ø 1.02]

26 [1.02]


40 [1.57]

30,2[1.19]

15,8[0.62]

14,7 [0.58]

70[2.75]

21,5[0.85]

58,7[2.31]

1,3[0.05] (2)

38[1.5]

5,2[0.20] (2)

26 [1.02]

13,5[0.53]

26 [1.02]

35 [1.38]

Ø 5,2[Ø 0.20] (2)

mounting holes

58,5 [2.30]

33,0[1.3]

40,5 [1.59]

Ø 19,05 x 6,35 wide[Ø 0.75 x 0.25 wide]


40 [1.57]




44[1.73]

1,7 [0.07]pretravel

26

40 [1.57]

30,2[1.19]

15,8[0.62]

70[2.75]

21,5[0.85]

58,7[2.31]

1,3[0.05] (2)

5,2[0.20] (2)

26 [1.02]

13,5[0.53]

35 [1.38]

Ø 5,2[Ø 0.20] (2)

mounting holes

Ø 16,66 x 5 wide[Ø 0.66 x 0.20 wide]

steel rollerand plunger

40 [1.57]


5,2 [0.20]

34[1.34]

64 [2.52]

14[0.55]

46 [1.81]

40 [1.57]30,2

[1.19]

15,8[0.62]

70[2.75]

21,5[0.85]

58,7[2.31]

1,3[0.05] (2)

5,2[0.20] (2)

26 [1.02]

13,5[0.53]

35 [1.38]

Ø 5,2[Ø 0.20] (2)

mounting holes

Ø 19,05 x 6,35 wide[Ø 0.75 x 0.25 wide]

hardened steel roller (2)

40 [1.57]



140,97[5.55]


40 [1.57]

30,2[1.19]

15,8[0.62]

70[2.75]

21,5[0.85]

58,7[2.31]

1,3[0.05] (2)

5,2[0.20] (2)

35 [1.38]

Ø 5,2[Ø 0.20] (2)

mounting holes

40 [1.57]



49 [1.93]

37,5 [1.48]

5,1 [0.20]

77,3[3.04]

81[3.19]

30[1.18]

5,54 [0.22] max. (3) for M5 screw

91[3.58]

57 [2.24]

15 [0.59]

13[0.51]

58,5 [2.30]

40 [1.57]

67,67[2.664]

38,1[1.50]

26[1.02]

14,68 ±0,762 [0.578 ±0.030]

26[1.02]

5,1 [0.20]

34 [1.34]34

[1.34]

49 [1.93]

37,5 [1.48]

81[3.19]

30[1.18]

5,54 [0.22] max. (3) for M5 screw

91[3.58]

57 [2.24]

15 [0.59]

13[0.51]

26[1.02]

64,39[2.535]

46,23 [1.82]

13,97 [0.55]

14,68 ±0,762 [0.578 ±0.030]

Ø 19,05 x 6,35 wide[Ø 0.75 x 0.25 wide]hardened

steel roller (2)

5,1 [0.20]

5,1 [0.20]

77,3[3.04]

67,67[2.664]


38[1.5]

58,5 [2.30]

40 [1.57]

49 [1.93]

37,5 [1.48]

81[3.19]

30[1.18]

5,54 [0.22] max. (3) for M5 screw

91[3.58]

57 [2.24]

15 [0.59]

13[0.51]

26[1.02]

14,68 [0.578]

5,1 [0.20]

26[1.02]

5,1 [0.20]

77,3[3.04]

67,67[2.664]


LS Series

38[1.5]

58,5 [2.30]

40 [1.57]

49 [1.93]

37,5 [1.48]

81[3.19]

30[1.18]

5,54 [0.22] max. (3) for M5 screw

91[3.58]

57 [2.24]

15 [0.59]

13[0.51]

26[1.02]

14,68 [0.578]

5,1 [0.20]

26[1.02]

34[1.34]

5,1 [0.20]

77,3[3.04]

67,67[2.664]



34[1.34]

9 [0.35]

20,6 [0.81]

Corrosion-resistant

steel plunger

33,7 [1.33]

49 [1.93]

37,5 [1.48]

77,3[3.04]

81[3.19]

5,54 [0.22] max. (3) for M5 screw

91[3.58]

57 [2.24]

15 [0.59]

67,67[2.664]

26[1.02]

5,1 [0.20]

5,1 [0.20]

16,8 [0.66]

1,65[0.065] max.

pretravel

26[1.02]


9[0.35]

18,2[0.72]

30[1.18]

26 [1.02]

26 [1.02]

54 [2.13]

46 [1.81]

28 [1.10]26[1.02]

49 [1.93]

37,5 [1.48]

77,3[3.04]

5,54 [0.22] max. (3) for M5 screw

91[3.58]

57 [2.24]67,67[2.664]

5,1 [0.20]

5,1 [0.20]

13 [0.51]

15 [0.59]



34[1.34]

9 [0.35]

20,6 [0.81]

Corrosion-resistant

steel plunger

33,7 [1.33]

49 [1.93]

37,5 [1.48]

77,3[3.04]

81[3.19]

5,54 [0.22] max. (3) for M5 screw

91[3.58]

57 [2.24]67,67[2.664]

26[1.02]

5,1 [0.20]

5,1 [0.20]

16,8 [0.66]

1,65[0.065] max.

pretravel

26[1.02]

15 [0.59]

81[3.19]

34[1.34]

Stainless steel coilspring actuator

(208LS152-4 only)

5 [0.20]

141[5.55]

26 [1.02] 26[1.02]

49 [1.93]

37,5 [1.48]

77,3[3.04]

5,54 [0.22] max. (3) for M5 screw

91[3.58]

57 [2.24]67,67[2.664]

5,1 [0.20]

5,1 [0.20]

15 [0.59]

002403-1-EN IL50 GLO June 2015Copyright © 2015 Honeywell International Inc. All rights reserved.

Sensing and Control

Honeywell

1985 Douglas Drive North

Golden Valley, MN 55422

honeywell.com

Find out moreHoneywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office.

To learn more about Honeywell’s

sensing and control products,

call +1-815-235-6847 or

1-800-537-6945,

visit sensing.honeywell.com, or

e-mail inquiries to

[email protected]

ADDITIONAL INFORMATIONThe following associated literature is available on the Honeywell web site at sensing.honeywell.com:• Product installation instructions

• Aerospace range guide

• Transportation range guide

• Limits and Machine Safety range guide

• Product application-specific information

– Application Note: Automated Storage and Retrieval System

– Limit and Enclosed Switches Application Information

– Limit and Enclosed Switches Operating Characteristics

– Limit and Enclosed Switches Reference Standards

– Limit and Enclosed Switches Typical Applications

WARNINGMISUSE OF DOCUMENTATION• The information presented in this product sheet is for

reference only. Do not use this document as a product installation guide.

• Complete installation, operation, and maintenance information is provided in the instructions supplied with each product.

Failure to comply with these instructions could result in death or serious injury.

WARRANTY/REMEDYHoneywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particu-lar purpose. In no event shall Honeywell be liable for conse-quential, special, or indirect damages.

While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application.

Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.

WARNINGPERSONAL INJURYDO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury.

Failure to comply with these instructions could result in death or serious injury.

micro switch™ ls general purpose limit switches...ls 1 standard with 38,1 mm fixed length lever...

Documents