microsoft mediaroom configuration for the 7800tn r2

B BEC 7300N Draft 802.11n ADSL2+ / BEC 7300N Draft 802.11n ADSL2+ /Broadband Router

How to configure the 7800TN R2 for Microsoft Mediaroom (MMR)

BEC Technologies, Inc. E-mail: [email protected]

1500 Precision Dr. Suite 100, Plano, TX 75074 Phone: 972-422-0877

www.bectechnologies.net

Microsoft Mediaroom Configuration for 7800TN R2

Connection Information

0/35 Data (IPoE) on VLAN 1000

0/36 Video (IPoE) on VLAN 2000

1. Login into the modem 192.168.1.254 admin/admin

2. Go to Advanced Setup>WAN>WAN Interface

Dual-WAN - ADSL2+ or Ethernet WAN for Broadband / FTTH Connectivity

PTM over ADSL2+ Support for Increased Bandwidth

IPv4 / IPv6 Dual Stack

Support 802.11n and Wi-Fi Protected Setup (WPS)

Quality of Service Control for Traffic Prioritization and Bandwidth

Management

VLAN Tagging, VLAN Mux and Enhanced IGMP Proxy/Snoop/Fast Leave

Operates Flawlessly with Microsoft Mediaroom IPTV

7800TN R2

Wireless-N ADSL2+/FTTH

Multi-Service Gateway






3. Under Layer2 interface click add

4. Select VLAN Mux Mode and Click Apply






5. Go to Advanced Setup>WAN>WAN Interface> Layer2 interface> click add

6. Change VPI/VCI to 0/36 and select VlanMux Mode and click Apply

7. Go to Advance Setup>WAN>WAN Service>Click Add

8. Select atm0(0_0_35) and click next






9. Select “IP over Ethernet” for parameter type

- Description to “Data” and

- Input “0” for 802.1P Priority

- Input “1000” for 802.1Q VLAN ID

- Click Next

10. Leave everything as Default on the WAN service page and click Next

11. Make sure NAT is enabled and click Next






12. Leave everything as default on the Default Gateway page and click next

13. Click Apply on the WAN Service summary page

14. Go to Advance Setup>WAN>WAN Service>Click Add

15. Select atm0(0_0_36) and click next






16. Select “IP over Ethernet” for parameter type

- Description to “Video” and

- Input “4” for 802.1P Priority

- Input “2000” for 802.1Q VLAN ID

- Click Next

17. Leave everything as Default on the WAN service page and click Next

18. Enable NAT and IGMP Multicast and click Next






19. Leave everything as default on the Default Gateway page and click next

20. Click Apply on the WAN Service summary page

21. Go to Advanced Setup>LAN> Enable IGMP snooping and click apply

microsoft mediaroom configuration for the 7800tn r2

Documents