mini shelter installation training for stc usf5 project-20130501_2

Security Level:

Mini-shelterInstallationand commissioningandcommissioningTraining

www.huawei.comSaudiSTCUSF52013Project

HUAWEI TECHNOLOGIES CO., LTD.

ContentsContentsz Preliminary of 2.1m Mini-shelter

z Mandatory toolsz Mandatory tools

z Mini-shelter installation1. Secure Mini-shelter2. Install component inside Mini-shelter3 Check and prepare to power on the Mini-shelter3. Check and prepare to power on the Mini shelter

HUAWEI TECHNOLOGIES CO., LTD. HuaweiConfidential 2

Basic CompositionBasic Composition2.1mminishelterprotfolio


Preliminary of 2.1m Mini shelter viewPreliminary of 2.1m Mini shelter view


Remarks:


Power systemlayoutforMinishelteronnewsite

MW

DBS39900

DCDU03B


Power systemequipmentlayoutforMinishelteronnewsite

AH1500(on the door)PC500D(on the door)

Mains or GensetRRUMDB

MainsorGenset

AC PowerDC Power




z Mini-shelter installation1. Secure Mini-shelter2. Install component inside Mini-shelter3 Check and prepare to power on the Mini-shelter3. Check and prepare to power on the Mini shelter


ToolsToolsMandatory Tools

Flatheadscrewdriver(26mm

Phillipsscrewdriver(M3M6)

Hammerdrill(4.2,8,and16drillbit Clawhammer Multimeter

Adjustablewrench Protectivegloves Wirestripper Measuringtape Marker

COAXcrimpingtool LevelSegmentedblade

utilityknife Hydraulicpliers Diagonalpliers


Some picture of tools

Hydraulichammer



FlatheadscrewdriverHeatgun



PliersAdjustablewrench


Remark: if we have to use a wrench tool as follows we must tap the handle withRemark:ifwehavetouseawrenchtoolasfollows,wemusttapthehandlewithInsulationmaterials




z Mini-shelter installation1. Secure Mini-shelter2. Install component inside Mini-shelter3. Check and prepare to power on the Mini-shelterp p p


PrecautionsO l t i d d lifi d l ll d t i t ll t d i t i H iOnly trained and qualified personnel are allowed to install, operate, and maintain Huawei equipment, and they must understand basic safety precautions to avoid hazards.

If a Mini-shelter is assembled onsite, the site environment should be equal to or above 0C. If the cabinet is scratched during transportation, paint or apply glue to the scratched areas.

Prepare a rainproof cloth to protect the Mini-shelter from rain.

Requirements for the Mini shelter location:Requirements for the Mini-shelter location:

A Mini-shelter should be installed in a high place where water can be easily drained. Swales and the areas prone to pondings are unsuitable for site construction.

The cabinet must comply with installation space requirements for later cabinet maintenance.

Requirements for the Mini-shelter installation direction:

Maintenance personnel must be safe when they maintain at the front door of the Mini-shelter.

The Mini-shelter is not exposed to direct sunlight and stays away from the wind.

When installing a mini-shelter in a residential area, ensure the Mini-shelter doors do not face the residential area.


Installation ProcessInstallingaSingle-CabinetMini-shelterAsaWhole


Move and secure Single-Cabinet 2 1m Mini-shelter

m

Move and secure Single-Cabinet 2.1m Mini-shelter

1 Requirements for Installation Space

The following figure shows the

2

0

0

0

m

m

The following figure shows the required clearances around the Mini-shelter.


Move and secure Single-Cabinet 2.1m Mini-shelter2 Requirements for door direction

Thedoorsshouldnotfacesunshinedirectlyin the afternoonintheafternoon

Door


Move and secure Single-Cabinet 2.1m Mini-shelter3 Recommended method of moving Mini-shelter

Insertthepallettruckintotheholesatthebottomofthecabinetandmovethecabinettotheinstallationplaceusingapallettruck.



Installexpansionboltsinthemountingholesatthefourcornersofthecabinet4 SecuringaSingleCabinet

bottomtosecurethecabinet.

Drawfour

Movethebi t Drillholes

Movebackthe

Securetheexpansion

Removethei b ltfour

holescabinet base

expansiontube

expansionbolts

Installandsecureexpansionbolts



Details: How to SecuringaSingleCabinet

Markfirst Drillaholevertically


Risk if not securing a Mini-shelterg




z Mini-shelter installation1. Secure Mini-shelter2. Install component inside Mini-shelter3. Check and prepare to power on the Mini-shelterp p p


InstallingComponentsinsideaMinishelter

1 Installing a door sensor

1.Securethe

1 Installing a door sensor

thedoorstatussensor.

2.Connecttheddoorstatussensor.

Doorstatussensor


sensor

Real Picture of Door sensor alarm cable connection


Door Sensor real picture viewDoor sensorDoorsensor


InstallingComponentsinsideaMinishelter2 Installing a Smoke Sensor1.Securethesmokesensor.Securethesmokesensorbasetothecabinettopusingtwoscrewsscrewsandfastenthesmokesensortothebasebasedonthedirectionshowninthe

ksmokesensor.

2.Connectthesmokesensor.

Smoke


Smoke Sensor

Smoke Sensor real picture view


InstallingComponentsinsideaMinishelter3 Installing a Temperature and Humidity Sensor3 Installing a Temperature and Humidity Sensor

Remarks:ThissensorshouldbeinstalledinsideBTScabinet


Temperature and humidity sensor alarm cable connection


Temperature and humidity Sensor real picture view


InstallingComponentsinsideaMinishelter

1. Secure the battery temperature sensor.

4 Installing a Battery Temperature Sensor

Place the battery temperature sensor on the right rack in the middle of the battery compartment and secure it by using a cable tie.


Battery Temperature sensor alarm cable connectiony p


InstallingComponentsinsideaMinishelter5 I t lli W t S1.Securethewatersensor.

Securethewatersensortothecabinetbottombyusingacabletie.

5 Installing a Water Sensor

2. Connect the water sensor2.ConnectthewatersensorThefollowingfigureshowstheportontheUIM02Ctoconnectto

signalcablesofthewatersensor.


Water Sensor real picture viewWaterSensorrealpictureview


Installing a DCDU

Slidethedirectcurrentdistributionunit(DCDU)intothe19inchrackalongtheguiderailsandtightenitusingfourM6screws.


Ali th t bl l ith th h l th b b d it (BBU) d

Installing a BBU

Alignthetwocableclawswiththeholesonthebasebandunit(BBU)andsecuretheBBUusingfourM4screwsontheleftandrightsides.

SlidetheBBUintothe19inchrackalongtheguiderailsandtightenitusingfourM6screws.


Installing a Lamp

! Lamp is DC power!LampisDCpower


Installing the ETP48200

Slidetheembeddedtelecompower(ETP48200)intothe19inchrackalongtheguiderailsandtightenitusingeightM6

WheninstallingtheETP48200,takeoutthePSUs,install

screws. thepowersubrack,andthenreinstallthePSUs.


Connecting the Temperature Control Equipment

ConnectingtheIntelligentHeatExchanger

ConnectingtheDCAirConditioner(PC500D)


Air-conditioner alarm cable connection

DIN6


Installing an Outdoor Ground Bar

Installtheoutdoorgroundbar on the steelbaronthesteelbaseoftheMinishelter(recommended).( )

Groundbarsecuringplate

M8x20(2PCS)antitheftscrew,tightenedusingan

antitheftwrench

Ontheconcretefloor aroundflooraroundtheMinishelter.


Real picture of Installing an Outdoor Ground Bar

ToinsidegroundingbarTositemaingroundingbar


Grounding SystemGrounding System


Principles for connecting grounding cablesPrinciples for connecting grounding cables


How to install batteryHow to install battery

Negative RTN+PositiveNegative


How to install batteryHow to install batteryConnectioncopperbarbetweeneverybatterycell


Rectifierintroduction(ETP48200B6)

Wi i t i l N

Loadlowvoltagedisconnection(LLVD)circuitbreaker

Batterylowvoltage

ACinputcircuitbreaker

WiringterminalN

Batterycircuitbreaker

disconnection(BLVD)circuitbreaker

DCoutput (RTN+)

Groundbar

Monitoringunit(SMU02B)

ACoutputcircuitbreaker

Userinterfacemodule(UIM02C)

Rectifier(PSU)


Connect the single-phase AC inputConnect the single phase AC input power cable. IftheACinputcablehasaPE

(yellowandgreen)wire,connectthePEwiretothe

Mustguaranteethevoltagebetween the two phase is indoorgroundbarintheMini

shelter.

betweenthetwophaseisabout220v(rangis200v~240v)

Connect the double live wires AC input power cable.

h lMustguaranteethevoltagebetweenthetwophaseisabout220v(rangis200v~240v)


PowerdistributionforMinishelter

ReceivingProviding Power name Power cable connection port

Receiving power name Cable size

BLVD F78 16A MCB LAMPF67 16A MCB PC500DF6 16A MCB AH1500F5 32A MCB RTN

Power systemETP48200-B6

F5 32A MCB RTNF4 63A MCB

LLVD F3 20A MCBF2 100A MCB F1 100A MCB DCDU03B 16mm2

B tt i t BAT2 125A MCB 150AH*1 225mm2Battery input BAT1 125A MCB 150AH*1 225mm2AC power output AC output 1*16A MCB 2P AH1500AC power input AC input 1*100A MCB 2P MDB 225mm2

LOAD8 12A MCB BBULOAD7 12A MCB

DCDU 03BLOAD6 12A MCB LOAD5 20A MCB LOAD4 20A MCB LOAD3 20A MCB LOAD2 20A MCB RRU3LOAD1 20A MCB RRU2

19

LOAD1 20A MCB RRU2LOAD0 20A MCB RRU1


Power cable layout for Mini-shelter

MDB AH1500 AH1500

ETP48200B6

PC500D

DCDU03B

LAMPRTN1

BAT1 BAT2

BBURRU1

RRU2

RRU3


1 2 3

Connecting the Communications Cable Between Monitoring Equipment and Base StationsEquipment and Base Stations

RJ45


External alarm list election in Mini-shelter

Signal resource External Alarm Name BBU Board BBU indicator Signal Cable colorPMU Alarm port

name

T l h l f il j hit / ALM1Telecom shelter power fail major

EXT-ALM0

white+/orange- ALM1

Telecom shelter battery discharge commercial power white+/green- ALM2

Power UPEU

Rectifier fault alarm white+/blue- ALM3

Telecom shelter tower light alarm white+/brown- ALM4

Telecom/General shelter fire alarm

EXT-ALM1

white+/orange- ALM5

Telecom shelter high temperature alarm white+/green- ALM6

Telecom/General shelter door hit /bl ATelecom/General shelter door alarm white+/blue- ALM7

Telecom shelter air condition 1and 2 fault white+/brown- ALM8


Real connection view

EXTALM0 EXTALM1


PowermonitorbyM2000inMinishelter

DDF


Set parameter in PMU Name:adminPassword:001or000001SetpowerparameterinETP48200forMinishelter

p

MainMenu Second-levelMenu Third-levelMenu Fourth-levelMenu

DefaultValue

Settings SystemPara LUILanguage - LocallanguageSetTimeZone - GMT+3:00QtyofBattery - - 1Rated Capacity - - 300Ah

QuickSettings

RatedCapacitySetDate - - -SetTime - - -IPAddress - - 192.168.0.10SubnetMask - - 255.255.255.0Gateway - - 192.168.0.1

Contacttheelementmanagementsystem(EMS),andsubmitenvironmentmonitoringf h ETP48200(UIM02C) h EMS (M2000) f fi i


parametersoftheETP48200(UIM02C)totheEMS(M2000)forcorrectconfiguration.



z Mini-shelter installation1. Secure Mini-shelter2. Install component inside Mini-shelter3. Check and prepare to power on the Mini-shelter


CHECK!CHECK!


Checking the InstallationChecking the Cabinet Installation

g

No. Check That

1 The cabinet is placed in the planned position.

2 All bolts are tightened, especially the bolts used for electric connection. Flat washers and spring washers are installed properly.

3 The cabinet is clean and free of dust and other materials.

4 The cabinet is clear and complies with dustproof requirements4 The cabinet is clear and complies with dustproof requirements.

5 The paint on the cabinet exterior is intact.

6 The cabinet door and lock work properly.6 The cabinet door and lock work properly.

7 Cable labels are correct, clear, and complete.


Checking the Installation EnvironmentChecking the Installation Environment

No. Check That

1 The cabinet surface is clean and free of dirt and fingerprints.

2 There is no unnecessary adhesive tape or cable tie on the cables.

3The inside of the cabinet contains no waste tape, cable ties, paper, or

3packing materials.

4 Objects around the cabinet are intact and clean.


Checking Electrical Connections

No. Check That

1 All ground cables are copper cables. Cable diameters are correct. No switches or fuses are installed on the cables and no short circuit occursor fuses are installed on the cables and no short circuit occurs.

2 The ground cable, AC power cables, and internal cables are correctly connected and screws are secured. No short circuit occurs during power input or output.

3 The length of ground cables and power cables is correct.

4 Lugs for power cables and PGND cables are soldered or crimped securely.

5 Power cables and PGND cables are routed and bundles separately from other cables.

6 Storage batteries are free of damage cracks and bulge6 Storage batteries are free of damage, cracks, and bulge.

7 Storage batteries are clear and experience no leakage.

8 Wiring terminal of storage batteries are free of damage break and acid leakage8 Wiring terminal of storage batteries are free of damage, break, and acid leakage.

9 Battery safety valves remain intact and experience no acid leakage.

10 Storage batteries are connected correctly.


g y

Checking Cable Installation

No. Check That

1 All cable joints are secured properly, especially the cable joints between network cables and at the cabinet bottom.

2 Exposed parts near the wiring terminals and lugs are wrapped in PVC insulation tape or heat shrinking tubing.

3 The flat washers and spring washers of all wiring terminals are l i t ll dsecurely installed.

4 Cables are bound neatly and cable ties are secured evenly and properlyproperly.

5 The routed cable should be convenient for future maintenance and expansion.p

6 All labels at the cable ends are clear.

7 The excess section of a cable strip should be cut evenly.


p y

KeyoperationforPoweronMinishelter


Thankyouwww.huawei.com

Copyright2011 Huawei Technologies Co., Ltd. All Rights Reserved.The information in this document may contain predictive statements including, without limitation,statements regarding the future financial and operating results, future product portfolio, new technology,etc. There are a number of factors that could cause actual results and developments to differ materiallyfrom those expressed or implied in the predictive statements. Therefore, such information is provided forreference purpose only and constitutes neither an offer nor an acceptance. Huawei may change theinformation at any time without notice.

mini shelter installation training for stc usf5 project-20130501_2

Documents

mini shelter location

minishelter location

mini shelter viewpreliminary

minishelter3 check

secure minishelter2

comsaudistcusf52 technologies

t i d d lifi d

contentscontentsz preliminary