�

®®

®®

®

MINIVEYOR MULTI-PURPOSE OVEN

MODEL210HX, 214HX Series

Installation and Operation

Instructions2M-HG0104 Rev. J 1/18/2012

214HX

ALL MODELS

22

These symbols are intended to alert the user to the presence ofimportant operating and maintenance instructions in the manualaccompanying the appliance.

RETAIN THIS MANUAL FOR FUTURE REFERENCENOTICE

Using any part other than genuine Star factory supplied parts relieves themanufacturer of all liability.Star reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes,improvements, additions or replacements for previously purchasedequipment.Due to periodic changes in designs, methods, procedures, policies andregulations, the specifications contained in this sheet are subject to change without notice. While Star International Holdings Inc., Company exercises good faith efforts to provide information that is accurate, we are not responsible for errors or omissions in information provided or conclusionsreached as a result of using the specifications. By using the information provided, the user assumes all risks in connection with such use.

MAINTENANCE AND REPAIRSContact your local authorized service agent for service or required maintenance. Please record the model number, serial number, voltage and purchase date in the area below and have it ready when you call to ensure a faster service.

SAFETY SYMBOL

Model No.

Serial No.

Voltage

Purchase Date

Business 8:00 am to 4:30 p.m. Central Standard TimeHours:

Telephone: (314) 678-6303

Fax: (314) 781-2714

E-mail Parts@star-mfg.com Service@star-mfg.com

Warranty@star-mfg.com

Website: www.star-mfg.com

Service Help Desk

Authorized Service Agent ListingReference the listing provided with the unit orfor an updated listing go to:Website: www.star-mfg.com E-mail Service@star-mfg.com

Mailing Address: Star International Holdings Inc., Company 10 Sunnen Drive St. Louis, MO 63143 U.S.A

�

SPECIFICATIONS 210HX-120V -60Hz Rating/Connection: 1,700WattsNEMAPlug: 5-15P, CUL5-20PElectricalSupply: Separateserviceperoven-14.2Amp,120VAC,60HzApproximateWeight(210HXOvenwithLegs):Installed-61.5Lbs(28kg),Shipping-39.5Lbs(18kg) Dimensions: Width: 4611/16"(118.6cm)-OvenwithShelves Depth: 157/16"(39.2cm) Height: 14"(35.5cm)-SingleOvenwithLegs

210HX-208V -60Hz Rating/Connection: 2,800WattsNEMAPlug: 6-20P ElectricalSupply: Separateserviceperoven-13.5Amp,208VAC,60HzApproximateWeight(210HXOvenwithLegs):Installed-61.5Lbs(28kg),Shipping-39.5Lbs(18kg) Dimensions: Width: 4611/16"(118.6cm)-OvenwithShelves Depth: 157/16"(39.2cm) Height: 14"(35.5cm)-SingleOvenwithLegs

210HX-220V -50Hz Rating/Connection: 2,800WattsNEMAPlug: CE-16ACord ElectricalSupply: Separateserviceperoven-12.7Amp,220VAC,50HzApproximateWeight(210HXOvenwithLegs):Installed-61.5Lbs(28kg),Shipping-39.5Lbs(18kg) Dimensions: Width: 4611/16"(118.6cm)-OvenwithShelves Depth: 157/16"(39.2cm) Height: 14"(35.5cm)-SingleOvenwithLegs

210HX-240V -60&50Hz Rating/Connection: 2,800WattsNEMAPlug: 6-20P CE-16ACordElectricalSupply: Separateserviceperoven-11.7Amp,240VAC,60Hz&50HzApproximateWeight(210HXOvenwithLegs):Installed-61.5Lbs(28kg),Shipping-39.5Lbs(18kg) Dimensions: Width: 4611/16"(118.6cm)-OvenwithShelves Depth: 157/16"(39.2cm) Height: 14"(35.5cm)-SingleOvenwithLegs

214HX-208V -60Hz Rating/Connection: 4,000WattsNEMAPlug: 6-30P ElectricalSupply: Separateserviceperoven-19.3Amp,208VAC,60HzApproximateWeight(214HXOvenwithLegs):Installed-77.5Lbs(31kg),Shipping-44.5Lbs(20kg) Dimensions: Width: 4611/16"(118.6cm)-OvenwithShelves,48 3/16" (122.4 cm) 214HXETB Depth: 197/16"(39.2cm) Height: 14"(35.5cm)-SingleOvenwithLegs

214HX-220V -50Hz Rating/Connection: 4,000WattsNEMAPlug: N/A ElectricalSupply: Separateserviceperoven-18.2Amp,220VAC,50HzApproximateWeight(214HXOvenwithLegs):Installed-77.5Lbs(31kg),Shipping-44.5Lbs(20kg) Dimensions: Width: 4611/16"(118.6cm)-OvenwithShelves Depth: 197/16"(39.2cm) Height: 14"(35.5cm)-SingleOvenwithLegs

214HX-240V -60&50Hz Rating/Connection: 4,000WattsNEMAPlug: 6-30P CE-16ACordElectricalSupply: Separateserviceperoven-16.7Amp,240VAC,60Hz&50HzApproximateWeight(214HXOvenwithLegs):Installed-77.5Lbs(31kg),Shipping-44.5Lbs(20kg) Dimensions: Width: 4611/16"(118.6cm)-OvenwithShelves,48 3/16" (122.4 cm) 214HXETB Depth: 197/16"(39.2cm) Height: 14"(35.5cm)-SingleOvenwithLegs

CheckwithfactoryforCEapprovedmodels.

4

GENERALINSTALLATIONDATAThisequipmentisdesignedandsoldforcommercialuseonlybypersonneltrainedandexperiencedinitsoperationandisnotsoldforconsumeruseinandaroundthehomenorforusedirectlybythegeneralpublicinfoodservicelocations.Beforeusingyournewequipment,readandunderstandalltheinstructions&labelsassociatedwiththeunitpriortoputtingitintooperation.Makesureallpeopleassociatedwithitsuseunderstandtheunitsoperation&safetybeforetheyusetheunit.Allshippingcontainersshouldbecheckedforfreightdamagebothvisibleandconcealed.Thisunithasbeentestedandcarefullypackagedtoinsuredeliveryofyourunitinperfectcondition.Ifequipmentisreceivedindamagedcondition,eitherapparentorconcealed,aclaimmustbemadewiththedeliveringcarrier.Concealeddamageorloss-ifdamageorlossisnotapparentuntilafterequipmentisunpacked,arequestforinspectionofconcealeddamagemustbemadewithcarrierwithin15days.Becertaintoretainallcontentsplusexternalandinternalpackagingmaterialsforinspection.Thecarrierwillmakeaninspectionandwillsupplynecessaryclaimforms.

INSPECTION&ASSEMBLYUNCRATINGANDINSPECTINGUnpacktheunitandcomponentsfromtheshippingcontainer.Removeallvisiblepackingmaterial and those from inside the cooking chamber. If damage is discovered, file a claim immediatelywiththecarrierthathandledtheshipment.Donotoperatetheunitifitwasdamagedduringshipping.Thefollowingshouldbeincluded:MiniveyorMulti-PurposeOven,StainlessSteelLoadUp&UnloadTrays,4StainlessSteelLegs.

REMOVEALLHEATINGELEMENTSHIPPINGSUPPORTSPRIORTOPLACINGYOURUNITINTOOPERATION.ASSEMBLYANDINSTALLATIONThe unit was shipped with certain assembly required, plug into a standard outlet specified for its voltage and amp draw. If improper electrical supply is determined, contact a qualified electrician priortousingtheunit.Removalandreplacementofthepowercordandplugwillvoidthewarranty.Forassistance,contactyourlocalauthorizedserviceagentforserviceorrequiredmaintenance.Attachthe4legsbyscrewingthemintotheweldnutslocatedonthebottomoftheunit.Whencomplete,usetwopeopletocarefullyturntheunitupright.Levelunitbyadjustingthefeet(approximately1/2"adjustment).Neveroperateunitwithoutproperlegsinplace.Before using the unit for the first time,wipedowntheexteriorwithadampcloth.

CAUTIONAllowenoughspacearoundtheovenforadequateventilation.Donotoperatetheunitwithoutthecrumbtrayproperlypositioned.Overheatingandpoorbakingmayoccur.Readalllabelsontheunitandfollowtheirinstructions.

LEG INSTALLATION

IL1035

CAUTION

CAUTION

CAUTION

�

ASSEMBLYANDINSTALLATIONcontinuedInstallunitinitsoperatingpositionallowsufficient space for operating personnel. InstalltheCrumb,LoadandUnloadTraysasshown,makingsuretheendsareatleast6"fromanyverticalcombustiblesurfaces.Haveanelectricianconnectinputpowertotheunit(s)inaccordancewithlocalelectricalcodes.Aconnectionterminalblockisinsidetheleftsidecavityformodelsnotprovidedwithacordandplugset.

ELECTRICALCONNECTIONBeforemakinganyelectricalconnectiontothisunit,checkthatthepowersupplyisadequateforthevoltage,amperageandrequirementsstatedontheratingplate.Awiringdiagramisincludedherewith.Disconnecttheunitfromthepowersourcebeforeinstallingorremovinganyparts.Beabsolutelysurethatthegroundconnectionforthereceptacleisproperlywired.Donotconnectequipmenttopowerwithoutpropergroundconnections.Impropergroundingmayresultinpersonalinjuryorfatality.

DONOTCUTORREMOVETHISPLUGORGROUNDINGPRONGFROMTHEPLUG.

CONNECT/PLUGUNITINTODEDICATEDA.C.LINEONLYSPECIFIEDONTHEDATAPLATEOFTHEUNIT.

HEATINGELEMENTSInspectallheatingelementsintheunitforbreakage.Everyunitisproperlytestedpriortoleavingthefactory,butdamagemayofoccurredduringshipping.Ifabrokentubeisfound,donotapplypowertotheunit.Ifeverythingchecksout,TurnonMainPowerSwitch,Turnbothheatcontrolsandconveyorbeltspeedcontroltothemaximumsettingandcheckallheatertubesandconveyorforproperoperation.

COOLINGSYSTEMAftertheunitisinitiallyturnedon,allow5to8minutesforthefancoolingsystemtocomeon.Onceon, check the air intake area located under the unit and be sure that there is a sufficient flow of air intothecontrolbox.Keepareaundertheunitcleanfromobstructionsthatmayresultinrestrictedairflow to the control box. Restricting the air flow will cause the unit to run hotter then designed, causing theHi-Limittoturnunitoff.SeetheOvenComponentssectiononpage7forcontrolbox&Hi-LimitResetlocations.

FINALCHECKIfallheatersandconveyorsystemsareoperatingproperly,switchthemasteron/offswitchtotheOFFpositionandallowunittocool,thefanwillcontinuetocirculateair,coolingtheunituntiltheinternaltemperatureshavebeendecreased.Ifaproblemisdiscoveredduringanyofthesestart-upprocedures,immediatelyswitchthemasteron/offswitchtotheOFFpositionandnotifytheStarServiceDepartmentat(314)634-6303.

CLEAN

OPERATE

UNLOADTRAY

EXTENDEDNOSEGUARD

CRUMB TRAY

TYPICAL LEFT TO RIGHT CONFIGURATION

ADJUSTABLE HEAT SHUTTERS

IL1038

WARNING

WARNING

6

STACKINGOVENSWhenstackingtwoHolmanMiniveyorOvensastackingspacerwithanexternalairductMUSTbeusedtopreventoverheatingofthecontrolboxofthetopoven.

1. Placebottomunitinpositionwheretheovenwillbelocated.2.Placestackingspacerontopofthebottomovenwithinternalairductfacingupand

towardstherearoftheoven.3. Mountexternalairductonstackingspacerasshownbelow.

Externalairductmustbeinstalledforcoolingsystemoftopunittofunctionproperly.4. Screwsetscrews(Qty4)intolegholeonthetopoven.5. Placetopovenonstackingspacer.Setscrewswillsetintocutoutintopofstacking

spacertolockunitintoposition.

NOTE: Air intake of top unit must fit over the internal air duct of stacking spacer to allow airflow into the control box of the top oven.

STACKING SPACER

SET SCREWS

TOP OVEN

BOTTOM OVEN

EXTERNAL AIR DUCT

IL1037

SET-SCREW CUT OUTS

TOPUNIT:setscrew,screwsintolegholes,unitsitsontopofspacer.STACKINGSPACER:(REQUIRED)Sitsontopofbottomoven.

EXTERNALAIRDUCT:Mountsontospacer,pointingdownward.

BOTTOMUNIT:Mustbeplacedonacounterinasecureposition.

7

DAILYOPERATIONBakingintheseunitsisacombinationofheatandbeltspeed.Somefoodsmayrequiremoretopheatorvisaversa;otherfoodsmayrequirelowtopandbottomheatandslowbeltspeeds.Everyproductshould,therefore,betestedusingtheseparatetop&bottomcontrolsandthevariablespeedcontroltoarriveatthecorrectbalanceofheatandbeltspeed.Whenchangingheatandorbeltspeedsettingallowapprox.5minutesfortheoventostabilizeitselfatthenewsettings.Checkthepowercordtoinsurethatitispluggedintoaproperoutlet.Alwaysallow10to15minutesofpreheattimebeforeloadingtheunitwithproduct.Failuretoallow sufficient preheat time will result in unsatisfactory cooking until the cooking chamber reaches operatingtemperature.Eventhoughtheelementscanreachthereoperatingtemperatureveryquickly,acertainamoutoftimeinneededtoallowthecookingchambertoreachitsoperatingtemperature.

1) Turnthemasteron/offswitchtotheONposition.2) Setboththetopandbottomheatcontrolsto500°F(260°C).3) Turnconveyorspeedcontroltothefastestsetting.4) Allow15-20minutesforinitialwarmup,

(5to8minutestoreachadjustedtemperature,onceunitisfullywarmedup)5) Oncetheunitispre-heated,adjustthecontrolstothepropersettingfortheproduct

youarepreparing.

CERTAINSURFACESAREEXTREMELYHOTDURINGOPERATIONANDCARESHOULDBETAKENWHILEUSINGTHISUNIT.OVENCOMPONENTS

UNLOAD TRAY

IL1039

ADJUSTABLE HEAT SHUTTER(QTY 2)

CONTROLBOX

HI-LIMITSWITCH

R TO L Conv.

POWERCORD

CRUMB TRAY

AIR INTAKEFAN

EXTENDED NOSE GUARD

ON/OFFSWITCH

UPPERHEAT

CONTROL

LOWERHEAT

CONTROL

CONVEYORSPEED

HI-LIMITSWITCH

L TO R Conv.

OPERATINGHINTSANDSAFETYDisconnectpowertotheunitwiththeswitchattheendofeachdayofoperation.Donotleavetheunitinoperationwithoutanattendant.Donotleavetheunitathightemperaturewhennotinuseorduringidleperiods.Thiswillcausefoodparticles and grease film to carbonize. Turning the temperature setting down will save energy, It will takeonlyafewminutesfortheunittoregainoperatingtemperature.

CAUTION

CAUTION

8

CLEANINGPreventivemaintenanceforyourHolmanOvenconsistsofthefollowingrecommendedcleaningprocedures.Tokeepyouroveninitstopoperatingcondition,thesestepsshouldbeperformedonadaily,weeklyorasindicated.

TURNUNITOFF,DISCONNECTUNITFROMPOWERSUPPLYORTURNPOWEROFFATWALLBREAKER,REMOVEPLUGFROMOUTLET.DAILY

1. TurnmainpowerswitchtotheOFFposition.Disconnectunitfrompowersourceandallowunittocool.

2. Usingamilddetergent,wipeexteriorsurfaces,cleanwithadampcloth.a.Forlightlysoiledbuild-up,cleanwithadampcloth.b.Forheavilysoiledbuild-up,useasoftdampclothandmilddetergent.DO NOT use caustic cleaners.

3. Removetheload&unloadtraybyliftingthemoutofposition.Cleanusingmilddetergentandwarmwater.

4. Remove each crumb tray by sliding each of them out from under the conveyor belt.C lean c rumb t rays by w ip ing w i th a damp c lo th and mi ld de tergent .DO NOT use caustic cleaners. Place trays back in place prior to putting unit back intooperation.

5. Reconnectpower.

WEEKLY1. Turnmainpowersaverswitchtothe

OFFposition.Disconnectunitfrompowersourceandallowtocool.

2. Performdailycleaningprocedures.3. Usingadampcloth,wipecleanthefan

guardlocatedonthecontrolboxcoverundertheunit.

CLEANCONVEYORBELT4. Reconnect power or turn power back

on.5. Switch the ON/OFF switch to the ON

position,andturnConveyortoitsfastestsetting.

6. WiththeConveyorturnedonandthecrumbtraysinplace,takeawiregrillbrushordryabrasivepad,cleantheexposedsurfaceofConveyorBeltbypassingthebrushorpad,backandforthacrossthesurfaceoftheConveyorBeltasthebeltmovespast.Continueuntiltheentirebeltisclean.MakesuretheCrumbTrayisinstalled,thiswillminimizetheamountofparticlesthatfallintotheoven.

7. WhentheConveyorBeltisclean,takeadampclothandwipetheconveyor,removing anylooseparticlesonthebeltsurface.

8. RemovetheCrumbTraysbyslidingoutfrombeneaththeconveyorbelt.CleantheCrumbTraysbywipingwithadampclothandmilddetergent.DONOTusecausticcleaners.

DONOTRUNCONVEYOROVENWITHOUTCRUMBTRAYSINSTALLED, OVERHEATINGTOELECTRICALCOMPONENTSANDPREMATUREFAILURECAN OCCURE.

DONOTIMMERSEORLETTHEUNITSTANDINWATER.

DONOTHOSEDOWNTHEUNITORTHETABLE/COUNTERIFTHEUNITISONTHETABLE/COUNTER.

KEEPAWAYFROMRUNNINGWATER.

WARNING

CAUTION

CAUTION

WARNING

IL1040

CLEANING CONVEYOR BELT

�

CLEANINGCONTINUED

MONTHLY1. TurnmainpowerswitchtotheOFFposition.Disconnectunitfromitspowersourceandallow

tocool.2. Performdaily&weeklycleaningprocedures.

REMOVAL&CLEANINGCONVEYORBELT3. Heavily soiledconveyorsurfaces,214models locateall 3of the

MasterLinkson theconveyorbelt.Follow thestep1 inFig1, toremovealloftheMasterLinks.

210modelshavenomasterlinks,toremove,unhookeachendofonelinkandbringthetwoendstogether,andunthread.Oncedetached,re-hookontoitselfsonottogetdamaged.

4. Nowthatthelinkshavebeenunhooked,theconveyorcannowbecarefullyremovedfromtheoven.Standingatoneendoftheoven.Startingwiththeendonthebottom,rolltheconveyorbeltuntilithasbeentotallyremoved.Takecarefulnoticebeingsurenottodamagetheheatertubes,andworkingitoverthedrivesprockets,(see Figure 2).

5. Clean conveyor belt in deep sink, caustic cleaners may be used.Foraheavysoiledconveyorbelt,soakovernightinhotsoapywater.

NOTE:DONOTATTEMPTTOCLEANTHEHEATERTUBES.6. Takethisopportunitytocleanandremoveanyloosematerialsinsidetheunit.Usinga

mildcleaneranddampcloth,carefullywipetheinsidesurfacesbeingsureNOTtocleantheheatertubes.DAMAGECANOCCURTOTHEHEATERTUBESFROMIMPROPERCLEANING.

DONOTSPRAYCLEANINGSOLUTIONSINTOOVENCAVITY.7. Reinstall conveyor belt by first laying the belt along the bottom of the oven cavity making sure

thehooksonthesidesarefacingtheinsideandtheendsofthehookswillbepointingawayformthedirectionofthebeltsonottocatchonanyinternalcomponentsonceputbackintooperation.Also,beingsuretoproperlyalignthebeltovertheConveyorDriveSprocketsshowninFig2.

NOTE:THEDIRECTIONOFTHEBELT.8. Next,pulloneendoftheconveyorbeltoverthetopofthe

sprockets,(beingsuretolinethelinksupproperlywiththesprockets)bringingthetwoendstogether.

9. 214models,Reinstallthepreviouslyremovedmasterlinksasshowninsteps2&3inFig.1.

210Models,unhookthelastlinkoftheconveyor,farthestawayfromyou,andrethreadthroughtheotherend,andreconnectbackontoitself.

12.Examinetheoventoassureproperinstallation,oncesatisfied, install crumb trays if you have not done so. DONOTOPERATEUNITWITHOUTCRUMBTRAYSINSTALLED.

13.Reconnectoventopowersupplyandcheckforproperoperation.

IFASSISTANCEISREQUIRED,CALLTHESTARSERVICETEAMAT(314)634-6303.

1.

2.

3.

IL1045

Fig1.MasterLinksRemoval&Installation

IL1046DRIVE SPROCKETS

Fig2.ConveyorDriveSprockets

CAUTION

CAUTION

�0

MAINTENANCEPROCEDURESA. REPLACINGHEATERTUBES 1) DISCONNECTPOWERSOURCE. 2) Removeboththeleftandrightsidepanels, byremovingthetrussheadscrews.Pullthe topofeachpaneloutslightlyandliftup. 3) Removeeachheatertubewireswhich arerequiringreplacementfromitsterminal blockconnection.OneTubeataTime. 4) Removeheatertuberetainerbyremoving retainerscrewswithwasher. 5) Gently,pulldefectiveheatertubeoutofunit. 6) Gently,putnewheatertubeintounit. 7) Replaceheatertuberetainers. 8) Reconnecttheheatertubewirestotheterminal

block. 9) Installeachsidepanel 10)Connectunittopowersourceandtestunitforproperoperation.

B. REPLACINGFANMOTOR1) DISCONNECTPOWERSOURCE.2) Afterunithascooled,removethecrumbtray,

andturnunitoversothebottomisfacingupward.Never place unit on its side.

3) Removethecontrolboxcoverwhichcontainsthefanmotor,byremovingthe2screws.

4) Unplugpowersupplycordfromfanmotor.5) Remove(4)screws,whichholdfanmotorandgrill

tothecontrolboxcoverandremovefan.6) Onceremoved,cleanfangrillandcontrolbox

coverusingwarmsoapywater.7) Putreplacementmotorandgrillinplaceand

securetothecontrolboxcoverwithscrewspreviouslyremoved.

8) Reconnectpowersupplycordtofanmotor.9) Replacebackpanelandenclosure.Fastenwith

screwsremovedinstep3.10) Connectunittopowersource,reinstallthecrumb

trayandtestunitforproperoperation.

C. REPLACINGBELTDRIVEMOTOR1) DISCONNECTPOWERSOURCE.2) Afterunithascooled,removethecrumbtray,

andturnunitoversothebottomisfacingupward.Never place unit on its side.

3) Removethecontrolboxcoverwhichcontainsthefanmotor,byremovingthe(2)screws.

4) Removethesidepanelthatwillexposethedrivechainandsprockets.

5) Removesprocketfrommotorshaft,usinganAllenwrenchandlooseningtheset-screw.

6) Removethewirefromterminalblockconnectingthedrivemotortotheinternalwiring.Onunitsrated208or240volts,notewhichcolorleadsarebeingusedfortheseconnectionsandwhichleadiscappedwithglasstape.Thenewmotorshouldusethesamearrangement.Referencethewiringdiagramifneeded.

7) Removescrewsholdingmotorinplaceandremovemotorfromunit.

8) Putnewmotorinplaceandattachlooselywithmountingscrews.9) Replacesprocketonmotorshaft.

NOTE: The two sprockets must line up FLUSH with each other, so the chain does not twist any during operation. Also the hub gets installed closets to the motor.

ELEMENT RETAINER

ELEMENT Control Side Shown IL1041

IL1042

FAN MOTOR

CONTROL BOX COVER

DRIVE MOTOR

DRIVE SPROCKET IL1043

��

MAINTENANCEPROCEDUREScontinued10) Slidemotoruntilthedrivechainhasabout1/4”slackwhen

lightlypushedatthecenterofitstopopenrun.See chain tensioning illustration.

11) Tightenscrewstosecuremotor.12) Rewireleadssameasremovedinstep6.13)Atthistimeyoumayplugunitinandtestforproperoperationprior

toreinstallingpanelsandturningunitbackoverontoitsfeet.14)Ifunitisworkingcorrectly,turnunitoffandunpluguntilcompleted.15) Reinstallsidepanelsandcontrolboxcover.

Placeunitbackintoitsuprightposition.Reinstallthecrumbtray.

16) Connectunittopowersourceandtestunitforproperoperation.

D. REPLACINGSPEEDCONTROL 1) DISCONNECTPOWERSOURCE.

2) Removethespeedcontrolknobandthelockingnutholdingthespeedcontrolinplace.

3) Removerightsidepanel,byremovingthetrussheadscrews.Pullthetopofthepaneloutslightlyandliftup.

4) Wiresfromthespeedcontrolgointoaterminalblocklocatedonthesideofthechassis.Removethewiresfromthecontrolandinsertwiresforthenewspeedcontrolintothesamepositionsasshownonthewiringdiagram.

5) Installthewasherontotheshaftofthespeedcontrol,followedbytheinstallation.

6) Whenmountingthespeedcontrolinthesidepanelbesuretopositiontheanti-rotationpinintheslotasshown.

7) Tightenthespeedcontrolassemblybyusingthelockingnut,followedbythecontrolknob.

8) Reinstallthesidepanelandtightenwiththescrewspreviouslyremoved.

E. CLEANINGAIRINTAKEONCEAWEEK. 1) DISCONNECTUNITFROMPOWERSOURCE. 2) Placeunitupsidedown. NOTE: You may damage the Heatertubes, by placing unit on its side. 3) Useavacuumcleanerandoradampclothtocleantheairintake. Thisprocedureshouldbedoneatleastonceaweek.

F. LUBRICATETHECHAIN&SPROCKETSEVERY6MONTHS 1) DISCONNECTUNITFROMPOWERSOURCE. 2) Removethesidepanelswhichexposeschaindrive. 3) Usinganextremepressure,syntheticchainlubricantwithatemperaturerangeupto400°F. Applyliberallyontochainandsprockets. Thisgreaseisavailableseparatelyaspartno.1P-Z8914.Call (314) 678-6303 to order. 4) Replacesidepanels,Reconnectpowersourceandtestunit.

IL1044

SPEED CONTROL WASHER

INSTALLATION

LOCKING NUT KNOB

SIDE PANEL

1/4”

Chain Tension

�2

TROUBLESHOOTINGGUIDEA. UNITWILLNOTHEAT,CONVEYORBELTWILLNOTMOVE. 1) BesurethemaincircuitbreakerisswitchedtotheONpositionandthereispowertotheoutlet. 2) ChecktoseeiftheovenispluggedinandallcontrolsareturnedtotheONposition. 3) BesuretheHi-LimitResetButtonispushedin. 4) CalltheStarServiceHelpDeskat(314)634-6303.

B. UNITWILLNOTHEAT,CONVEYORTURNSPROPERLY. 1) Checktoseeifthetopandbottomheatcontrolshavebeenturnedtothemaximumsetting. 2) PresstheHi-LimitResetButtonlocatedunderneaththeconveyorbeltontheinletside.Ifthisreactivates theheatertubes,seeHi-LimitResetSectionbelow. 3) Ifnot,calltheStarServiceHelpDeskat(314)634-6303.

C. HI-LIMIT(HEAT)RESET.YourHolmanconveyorovenisequippedwithanautomaticactivatedtemperaturelimitswitchwhichinterruptstheheatertubeconnectionsiftheairtemperatureinthecontrolboxexceeds190°F(88°C)Thislimitswitchcanberesetmanuallybypushingthebuttoninthecenteroftheswitchwhichislocatedonthepowercordsidepanel,onoldermodelsitsontherightsideundertheconveyorbelt.SeeOvenComponentsonPage7forlocation.Unitwillnotresetuntilinternaltemperaturehasfallenbelow190°F(88°C).

NOTE:THEHI-LIMITSWITCHCANBEACTIVATEDIFTHEREISNOTAPROPERAMOUNTOFAIRFLOWBEINGGENERATEDBYTHECOOLINGFAN.IFTHISOCCURS: 1) DISCONNECTUNITFROMPOWERSOURCE. 2) Checktoseeiftheairintakearea(centerofthecontrolbox,bottomofunit)isfreeofdust, greaseorotherobstructions. 3) Check to see if crumb trays (heat reflectors) are in place. If the Hi-Limit Switch can not be reset, call the StarServiceHelpDeskat(314)634-6303.

CAUTIONNEVEROPERATEUNITWITHOUTCRUMBTRAYSINPOSITIONASTHISCAUSESOVERHEATINGINTHECONTROLBOX.

D. CONVEYORWILLNOTTURN,UNITHEATSPROPERLY. Tocheckformechanicalbinding: 1) DISCONNECTUNITFROMPOWERSOURCE. 2) Checktoseeifthereareobstructionsintheconveyor systemthatmaycauseajam. Ifso,removeobstruction. 3) Checkpowersupply&terminalblocksforlooseor disconnectedwires.4) Removerightsidepanelanddrivemotorsprockets,

seeillustration.Manuallymoveconveyorbelttocheckformechanicalbinding.Ifconveyorbeltmovesfreely,calltheStarServiceHelpDeskat(314)634-6303.Thedrivemotororspeedcontrolmayhavetobereplaced.

E. CONVEYORTURNSATONESPEED REGARDLESSOFSPEEDCONTROLSETTING. 1) CalltheStarServiceHelpDeskat(314)634-6303,asspeedcontrolMAYneedreplacing. RefertoREPLACINGSPEEDCONTROLintheprevioussection.

F. COOLINGFANDOESNOTSTART 1) Removecontrolboxcoverandcheckfanbladeforobstruction. 2) Checkelectricalconnectionsaresecureandcomplete. 3) CalltheStarServiceHelpDeskat(314)634-6303,asthefanswitchandorfanmotorMAYneed replacing. RefertoREPLACINGFANMOTORintheprevioussection.

DRIVE SPROCKET CHAIN

IL1047

DRIVENSPROCKET

��

WIRINGDIAGRAMSAllwiringdiagramsonthefollowingpagesarethoseofcurrentandobsoletedesignmodels,andmaynotrepresentcurrentproduction.Todeterminewhichdiagramgoeswithyourunit,referencethenameplatelocatedonthecordsideoftheunit,andusethetablebelow.CalltheStarServiceHelpDeskat(314)634-6303,ifyouhavequestions,orunabletodetermineyourmodelsdiagram.

Temp Control

Phase Control

IL1048

Temperature Probe

Fan Switch

3 Wired Potentiometer 2 Wired Potentiometer

TEMP CONTROL PHASE CONTROL

Fan Switch

Pilot Light

HEATCONTROLSThereisonecontrolforeachheatcontrolknob.Thesearelocatedinthecontrolbox.Todeterminewhattypeofheatcontrolsyourunitisequippedwith,followtheseeasyinstructions.1. IfyourunitisequippedwithaPilotLightyourunit

isaTempControlunit,ifitdoesnothaveaPilotLight,youhaveaPhaseContolunit.

WIRINGDIAGRAMSTABLEOFCONTENTSDESCRIPTION PAGE210HX/214HX,120V,50/60Hz,4-Tube,WiredSeries 14210HX,120V,60Hz,4-Tube,WiredSeries,Canada 15210HX/214HX,208/220/240V,50/60Hz,3.2Kw,4-Tube,WiredSeries 15214HX,220V,50/60Hz,3.6Kw,4-Tube,WiredSeries 15214HX,208V,60Hz,4.0Kw,4-Tube,WiredSeries 15214HX,208V,60Hz,4.5Kw,4-Tube,WiredSeries 15210HX,120V,60Hz,4-Tube,WiredParallel 16214HX,240V,50Hz,4-Tube,WiredParallel 16214HXR,240V,50Hz,4.5Kw,4-Tube,WiredParallel 16214HX,208/240V,50/60Hz,3.6Kw,4-Tube,WiredParallel 16214HX,208/220/240V,50/60Hz,5-Tube,WiredParallel 17214HX,208/220/240V,50/60Hz,4.0Kw,5-Tube,WiredParallel 17214HX,208V,60Hz,4.5Kw,5-Tube,WiredParallel 17214HX,208/240V,60Hz,4.5Kw,6-Tube,WiredParallel 18210/214HX,208/240V,50Hz,CE,4-Tube,WiredSeries 19210/214HX,208/240V,50Hz,4-Tube,WiredParallel 20

�4

®

MODEL:210HX, 120V, 50/60Hz, 4-Tube, Wired Series 214HX, 120V, 60Hz, 4-Tube, Wired Series THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

020022 Rev B 9/22/2009

GND

HEAT ADJUST

HEAT ADJUST

CONVEYORMOTOR

HIGHLIMIT

SWITCH

POWER ON/OFF

FAN CONTROL

FAN MOTOR

SPEED CONTROL

GND

L1

L2

AS SHOWN ABOVE FOR

CORD SUPPLIED UNITS

BLA

CK

WH

ITE

GROUND

L2 L1

Top Heat

Bottom Heat

BLU

YEL

ORG

ORG

BLU

BLK

BLK

RED

RED

YEL

RED

BLUBLK

PUR

BLK

WHT

RED

BLU

BLU

BLK

REDBLK

BLKBLK

��

RED

RED

YEL

ORG

BLU

BLU

YE

L

BLK

YE

L

BLK

WHT

PUR

BLK WHT

BLK

REDBLKRED

BLKBLKBLKBLU

RED

WHT

WHT

BLK

®

MODELS:210HX, 120V, 60Hz, 4-Tube, Wired Series, Canada210HX(P)/214HX, 208,220,240V, 50/60Hz, 3.2 Kw, 4-Tube, Wired Series214HX, 220V, 50/60Hz, 3.6 Kw, 4-Tube, Wired Series214HX, 208V, 60Hz, 4.0 Kw, 4-Tube, Wired Series214HX, 208V, 60Hz, 4.5 Kw, 4-Tube, Wired Series214HXBM, 240V, 60Hz, 4.5Kw, 4-Tube, Wired SeriesTHIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

020001 Rev C 9/16/08

GND

HEAT ADJUST

HEAT ADJUST

CONVEYOR MOTOR

HIGHLIMITSWITCH

POWER ON/OFF

FAN CONTROL

FAN MOTOR

SPEED CONTROL

AS SHOWN ABOVE FOR

CORD SUPPLIED UNITS

BLA

CK

(brown*)

WH

ITE(blue*)

GROUND

L2 L1

*2E-Y9002 Shuko plug

�6

BLK

REDHIGH LIMIT

SWITCH

RED

RED

RED

GROUND

Top Heat

Bottom Heat

BLU

YEL HEAT

ADJUST

ORG

ORG

YEL

WHT

PUR

BLK

BLK

BLKBLKBLKBLU

WHT

WHT

BLK

®

MODEL:210HX, 120V, 60Hz, 4-Tube, Wired Parallel214HX, 240V, 50Hz, 4-Tube, Wired Parallel214HXR, 240V, 50Hz, 4.5Kw, 4-Tube, Wired Parallel214HX, 208/240V, 50/60Hz, 3.6Kw, 4-Tube, Wired Parallel

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

020014 Rev A 11/17/2005

208/240 VAC

240 VAC

�7

�8

ORG

BLU

WHT

ORG

YEL

BLU BLU

RE

D

BLK

OR

G

BLK

BLK BLK

BLK

WHT

BRN

RE

D

RE

D

RE

D

BLK

YE

L

®MODEL:214HX, 208/240V, 60Hz, 4.5Kw, 6-Tube, Wired Parallel

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

020175 Rev - 9/11/2002

1

3 4

1

3 4

M

MDRIVE MOTOR

FAN MOTOR

ON/OFF SWITCH

RESET

SPEED CONTROL

BOTTOM HEAT

TOP HEAT

L1L2

GROUND

FAN SWITCH

HEAT ADJUST

ADJUSTHEAT

TOP HEAT

BOTTOM HEAT

��

PilotLight

Non-CordSupplied Units

L1

L2

GND

High-LimitSwitch

AS SHOWN ABOVE FOR CORD SUPPLIED UNITS

BLACK

WHITE

GROUND

L2

L1

TOP HEAT

FAN

BOTTOM HEAT

RED

RED

RE

D

ORN

WHT

BLK

BLK

WHT

YEL

BLK

BLK

BRN

BLKBLK

BLK

BLK

BLKBLK

REDRED

ORG

BLU

WH

T

OR

G

PU

R

OR

GY

EL

PU

R

YE

L

WH

T W

HT

WH

T

WH

T

OR

G

PU

R

OR

GY

EL

PU

R

YE

L

WH

T W

HT WHT

®

MODEL:210/214HX, 208/240V, 50Hz, CE, 4-Tube, Wired Series

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC. NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

820019 Rev. C 6/23/2006

20

®MODEL:210HX/214HX, 208/240V, 50Hz, 4-Tube, Wired Parallel

THIS DRAWING CONTAINS INFORMATION CONFIDENTIAL TO STAR MFG. INT'L. INC.

NO REPRODUCTION OR DISCLOSURE OF ITS CONTENTS IS PERMITTED.

820039 Rev - 2/07/2001

Top Heat

Bottom Heat

M

Main Power or Cordset

MConveyorMotor

PowerOn / Off

BOTTOM HEAT CONTROL

SpeedControl

High Limit Reset

BOTTOM TEMP. PROBE

FAN

TOP TEMP. PROBE

CONTROL

TOP HEAT

PILOT LIGHT

REDRED

BLK

BLK BLK

BLK

BLK

BLK

REDWHT WHT

ORG

BLU

BLKBLK

BLK

BLKBLK

BLK

BRN

REDRED

OR

GO

RG

YE

L P

UR

YE

L P

UR

WH

T

OR

G

YE

L P

UR

YE

L P

UR

OR

G

WH

T W

HT

WHT

WH

T W

HT

WH

T WHT

YEL

BLK

BLK

WHT WHT

YEL

2�

2M-4497-2 10/2010

The foregoing warranty is in lieu of any and all other warranties expressed or implied and constitutes the entire warranty.

FOR ASSISTANCE

Should you need any assistance regarding the Operation or Maintenance of any Star equipment; write, phone, fax or email our Service Department.In all correspondence mention the Model number and the Serial number of your unit, and the voltage or type of gas you are using.

ALL:* Pop-Up Toasters* Butter Dispensers* Pretzel Merchandisers

(Model 16PD-A Only)* Pastry Display Cabinets* Nacho Chip Merchandisers* Accessories of any kind* Sneeze Guards* Pizza Ovens (Model PO12 Only)* Heat Lamps* Pumps-Manual

Visit our Website at: www.star-mfg.com Email: service@star-mfg.com

THOROUGHLY INSPECT YOUR UNIT ON ARRIVALThis unit has been tested for proper operation before leaving our plant to insure delivery of your unit in perfect condition. However, there are instances in which the unit may be damaged in transit. In the event you discover any type of damage to your product upon receipt, you must immediately contact the transportation company who delivered the item to you and initiate your claim with same. If this procedure is not followed, it may affect the warranty status of the unit.

LIMITED EQUIPMENT WARRANTYAll workmanship and material in Star products have a one (1) year limited warranty on parts & labor in the United States and Canada. Such warranty is limited to the original purchaser only and shall be effective from the date the equipment is placed in service. Star's obligation under this warranty is limited to the repair of defects without charge, by the factory authorized service agency or one of its sub-agencies. Models that are considered portable (see below) should be taken to the closest Star service agency, transportation prepaid.

> Star will not assume any responsibility for loss of revenue.

> On all shipments outside the United States and Canada, see International Warranty.

* The warranty period for the JetStar six (6) ounce & Super JetStar eight (8) ounce series popcorn machines is two (2) years.

* ThewarrantyperiodfortheChrome-MaxGriddlesisfive(5)yearsonthegriddlesurface.Seedetailedwarrantyprovidedwithunit.

* ThewarrantyperiodforTeflon/Dura-Teccoatingsisoneyearundernormaluseandreasonablecare.ThiswarrantydoesnotapplyifdamageoccurstoTeflon/Dura-Teccoatingsfromimpropercleaning,maintenance,useofmetallicutensils,orabrasivecleaners,abrasivepads,productidentifiersandpoint-of-sale attachments, or any other non-food object tha comes in continuous contact with the roller coating. This warranty does not apply to the “non-stick” properties of such materials.

> This warranty does not apply to "Special Products" but to regular catalog items only. Star's warranty on "Special Products" is six (6) months on parts and ninety (90) days on labor.

> This warranty does not apply to any item that is disassembled or tampered with for any purpose other than repair by a Star Authorized Service Center or the Service Center's sub-agency.

> This warranty does not apply if damage occurs from improper installation, misuse, wrong voltage, wrong gas or operated contrary to the Installation and Operating instructions.

> This warranty is not valid on Conveyor Ovens unlessa"start-up/check-out"hasbeenperformedbyaFactoryAuthorizedTechnician.

PARTS WARRANTYParts that are sold to repair out of warranty equipment are warranted for ninety (90) days. The part only is warranted. Labor to replace the part is chargeable to the customer.

SERVICES NOT COVERED BY WARRANTY

PORTABLE EQUIPMENTStar will not honor service bills that include travel time and mileage charges for servicing any products considered "Portable" including items listed below. These products should be taken to the Service Agency for repair:

1. Traveltimeandmileagerenderedbeyondthe50mileradiuslimit 2. Mileage and travel time on portable equipment (see below) 3. Labor to replace such items that can be replaced easily during a daily cleaning

routine, ie; removable kettles on fryers, knobs, grease drawers on griddles, etc. 4. Installation of equipment5. Damagesduetoimproperinstallation 6. Damages from abuse or misuse 7. Operated contrary to the Operating and Installation Instructions 8. Cleaning of equipment 9. Seasoning of griddle plates

10. Voltage conversions11. Gas conversions12. Pilot light adjustment13. Miscellaneous adjustments14. Thermostat calibration and by-pass adjustment15. Resettingofcircuitbreakersorsafetycontrolsorresetbuttons16. Replacementofbulbs17. Replacementoffuses18. Repairofdamagecreatedduringtransit,delivery,& installationORcreatedbyactsofGod

* TheModel510FDFryer.* TheModel526TOAToasterOven.* TheModelJ4R,4oz.PopcornMachine.*TheModel518CMA&526CMACheeseMelter.* TheModel12MC&15MC&18MCPHotFoodMerchandisers.* TheModel12NCPW&15NCPWNachoChip/PopcornWarmer.* All Hot Dog Equipment except Roller Grills & Drawer Bun Warmers.* All Nacho Cheese Warmers except Model 11WLA Series Nacho Cheese Warmer. * All Condiment Dispensers except the Model HPD & SPD Series Dispenser.* AllSpecialtyFoodWarmersexcept Model 130R, 11RW Series, and 11WSA Series.* AllQCS/RCSSeriesToastersexcept Model QCS3 & RCS3 Series.* AllFastSteamerModelsexcept Direct Connect Series.

1

2

43

56

78

11

12

11 10

9

7

1314 15 16 17 18

19

20

22 21

24

2526

27

33

2829

30

32

34

35

36

38

37

11

1211

1039

4041

42

43

PhaseTemp

Nameplate

23

31

44

MODEL: MINIVEYOR210HX, 214HX SK2150 Rev. B 9/14/09

®

Fig No.

Part No Description

QuantityPer

1 GA-401287 1 TopCover2 HM-400891 2 HeatShutter3 2P-150001 1 DriveChain,12in.4 2P-Z8779 1 Sprocket,25P-11T5/16ID,Drive 2P-200646 1 Sprocket,25B20x5/16,Drive 210HXRC-V015 2P-200653 1 Sprocket,25B20x3/8,Driven 2P-115362 1 Sprocket,25B11x3/8,Driven 210HXRC-V016 2U-Z13803 1 DriveMotor,(L-R) 120V 2U-Z13804 1 DriveMotor,(R-L) 120V 2U-Z11871 1 DriveMotor,(R-L),CCW 208/240V 2U-Z11870 1 DriveMotor,(L-R),CW 208/220/240V7 HA-112261 2 Bearings8 2A-100906 1 DriveShaft9 GA-101401 1 UnloadTray10 2C-200015 8 Screws,8-32x3/8Knurled11 2P-200693 4 ExtensionBushing,Teflon12 2A-202904 2 IdlerShaft13 SEEELEMENTCHART 14 GA-402129 4 Retainers,HeaterTube(Quartz) GB-402444 6 Retainers,HeaterTube(Metal)15 SP-115341 1 HeatControlAssy.(Bot) 120V SP-115343 1 HeatControlAssy.(Bot) 2J-200567 1 HeatControlAssy.(Bot) CE16 SP-115340 1 HeatControlAssy.(Top) 120V SP-115342 1 HeatControlAssy.(Top) 2J-200567 1 HeatControlAssy.(Top) CE17 SP-118002 1 SpeedControl 120V GB-118062 1 SpeedControl18 2E-200180 3 Insulation,SwitchPot.19 GB-401328 1 SidePanel,(controls)20 2M-200818 1 ControlLabel21 SP-115360 3 KnobAssembly 2R-200708 3 Cap,Knob(includedin#21) 2R-200713 3 Skirt,Knob(includedin#21) 2R-200768 3 KnobControl(Includedin#21)22 SP-115338 2 Control,Phase 120V SP-115339 2 Control,Phase SP-115347 2 Control,Temp CEOnly23 2J-200568 2 HeatProbe CEOnly24 1P-E129912inchesEdging,16-18GA.SS(forbothholes)25 HG-402144 1 FanSwitchBracket26 2E-200574 1 FanSwitch

210HX Series Holman Conveyor Oven

Rev.J1/27/2012

27 2E-200543 1 On/OffSwitch28 2R-200716 4 Legs,2½”29 2P-401780 1 Guard,ToggleSwitch30 2J-200427 1 PilotLight CEOnly32 2U-200559 1 FanMotor 120V 2U-200561 1 FanMotor33 GA-401499 1 ControlBoxCover34 2R-200562 1 FanGrill35 2C-200048 4 Screw,FanGrill36 GA-401097 1 ExtendedNoseGuard37 HM-416962 1 CrumbTray38 GA-160001 1 ConveyorBelt,10”wide40 2E-200566 1 ResetSwitch41 GB-Z 1 SidePanel,L-R(cord)w/sideHi-Limit 12/3CordSet GB-Z10058-2 1 SidePanel,R-L(cord)w/sideHi-Limit 12/3CordSet GB-Z10055 1 SidePanel,L-R(cord)w/sideHi-Limit 14/3,16/3CordSet GB-Z10055-2 1 SidePanel,R-L(cord)w/sideHi-Limit 14/3,16/3CordSet GB-401524 1 SidePanel,(cord)w/osideHi-Limit GB-Z9862 1 SidePanel,(cord) HXETB42 2K-Y6764 1 Bushing,Cord12/3CordSet 2K-200463 1 Bushing,Cord14/3&16/3CordSet43 2E-200375 1 CordSet,14/3 120V 2E-200376 1 CordSet,14/3 208/240V 2E-Y9002 1 CordSet,16-3 CEApproved

NI 2C-200773 1 ButtonPlugNI 2E-200387 1 Cord,CoolingFanNI 2P-115501 AR Jumpers(2Position)NI 2P-115502 AR Jumpers(3Position)NI GE-115503 AR Jumpers(4Position)NI HA-115383 AR Block,Terminal(3Position)NI HC-115381 AR Block,Terminal(4Position)NI HK-115388 AR Block,Terminal(6Position)NI HB-115387 AR Block,Terminal(8Position)NI HC-115390 AR Block,Terminal(10Position)

NI 1L-Z12397 1 EXTREMEPRESSUREMULTIPURPOSESYNTHETIC GREASE(80°FTO400°F),TUBE1oz.

NI=NOTILLUSTRATED,AR=ASREQUIRED

Fig No.

Part No Description

QuantityPer

Fig No.

Part No. Description

QuantityPer

1 GB-401288 1 TopCover2 HM-400899 2 HeatShutter3 2P-150001 1 DriveChain,12in.4 2P-200643 1 DriveSprocket 2P-200646 1 DriveSprocket(20tooth) 214HXRC,HXETB,HXR 2P-200653 1 DriveSprocket(20tooth)214HXRRCM,214HXRCM5 2P-200653 1 DrivenSprocket 2P-115362 1 DrivenSprocket(11tooth) 214HXRC,HXETB,HXR 2P-Z8779 1 DrivenSprocket(11tooth)214HXRRCM,214HXRCM6 2U-Z11871 1 DriveMotor,(R-L),CCW 214HXR 2U-Z11870 1 DriveMotor,(L-R),CW 214HXR,214HXRRCM, 214HXRCM7 GB-112262 2 Bearings8 2A-100907 1 DriveShaft9 GB-101402 1 UnloadTray10 2C-200015 8 Screws,8-32x3/8Knurled11 2P-200693 4 ExtensionBushing12 2A-202905 2 IdlerShaft13 SEE ELEMENT CHART 14 GB-402245 6 Retainers,QuartzElements GB-402444 6 Retainers,MetalElements GA-402129 4 Retainer,QuartzElements CEOnly GB-Z9864 1 Retainer,6MetalElements HXETB,HXRETB15 SP-115341 1 HeatControlAssy.(Bottom) 120V SP-115343 1 HeatControlAssy.(Bottom) 208/220/240V 2J-200567 1 HeatControlAssy.(Bottom)TEMP CEOnly16 SP-115340 1 HeatControlAssy.(Top) 120V SP-115342 1 HeatControlAssy.(Top) 208/220/240V 2J-200567 1 HeatControlAssy.(Top)TEMP CEOnly17 GB-118062 1 SpeedControl18 2E-200180 3 Insulation,SwitchPot.19 GB-401328 1 SidePnl,(controls)19 GB-Z9861 1 SidePnl,(controls)mfgbefore11/07HXETB,HXRETB20 2M-200818 1 ControlLabel 2M-200819 1 ControlLabel 214HXALT 2M-Z9876 1 ControlLabel 214HXRC,HXETB,HXR21 SP-115360 3 KnobAssembly 2R-200708 3 Cap,Knob(includedin#21) 2R-200713 3 Skirt,Knob(includedin#21) 2R-200768 3 KnobControl(Includedin#21)22 SP-115339 2 Control,Phase SP-115347 2 Control,Temp CEOnly23 2J-200568 2 HeatProbe CEOnly

214HX Series Holman Conveyor Oven

Rev.J1/27/2012

24 1P-E1299 12in Edging,16-18GA.SS(forbothholes)25 HG-402144 1 FanSwitchBracket26 2E-200574 1 FanSwitch27 2E-200543 1 On/OffSwitch28 2R-200716 4 Legs,2½”29 2P-401780 1 Guard,ToggleSwitch30 2J-200427 1 PilotLight, CEOnly31 2E-200535 1 Contactor;Relay32 2U-200561 1 Motor,Fan240V23BTM32 2U-200559 1 Motor,Fan120V12A12-BTM 120V33 HM-401498 1 ControlBoxCover34 2R-200562 1 FanGrill35 2C-200048 4 Screw,FanGrill36 HM-401096 1 ExtendedNoseGuard37 HM-402787 1 CrumbTray38 GB-160007 1 ConveyorBelt,14”Wide39 2B-200603 3 MasterLinks 214HX40 2E-200566 1 ResetSwitch41 GB-Z10058 1 SidePnl,L-R(cord)w/sideHi-Limit 12/3CordSet GB-Z10058-2 1 SidePnl,R-L(cord)w/sideHi-Limit 12/3CordSet GB-Z10055 1 SidePnl,L-R(cord)w/sideHi-Limit 14/3,16/3CordSet GB-Z10055-2 1 SidePnl,R-L(cord)w/sideHi-Limit 14/3,16/3CordSet GB-401524 1 SidePnl,(cord)w/osideHi-Limit GB-Z9862 1 SidePnl,(cord) HXETB,HXRETB42 2K-Y6764 1 Bushing,Cord12/3CordSet 2K-200463 1 Bushing,Cord14/3&16/3CordSet43 2E-200375 1 CordSet,14/3 120V 2E-200376 1 CordSet,14/3 208/220/240V 2E-200374 1 CordSet,12/3 208/220/240V 2E-Y9002 1 CordSet,16/3 220/240VCEApproved HG-Z16423 1 CordSet,BS546 214HXA-V2844 2E-30901-08 2 FuseHldrforSCFuse 2E-Z5680 2 FUISE-CLASSG(5amp)NI 2E-200387 1 Cord,CoolingFanNI 2P-115501 AR Jumpers(2Position)NI 2P-115502 AR Jumpers(3Position)NI GE-115503 AR Jumpers(4Position)NI HA-115383 AR Block,Terminal(3Position)NI HC-115381 AR Block,Terminal(4Position)NI HK-115388 AR Block,Terminal(6Position)NI HB-115387 AR Block,Terminal(8Position)NI 1L-Z12397 1 MultipurposeSyntheticGrease(80°FTO400°F),tube1oz.

Fig No.

Part No. Description

QuantityPer

NI=NOTILLUSTRATED,AR=ASREQUIRED

Fig No.

Part Number Description

QuantityPer

210HX 13 GA-199100 4 Heater Tube (430W, 3.58A) 120V (Metal) 14.3 GH-197848 4 HeaterTube(7.86Ω,425W,3.54A) 120V(Quartz) 14.2 2N-209197 4 Heater Tube (700W, 3.36A) 208V (Metal) 13.4 HO-197841 4 HeaterTube(14.5Ω,700W,3.36A) 208V(Quartz) 13.4 HT-197845 4 HeaterTube(800W,3.84A) 208V(Quartz) 15.4 HO-197844 4 HeaterTube(15.84Ω,700W,3.18A) 220V(Quartz) 12.7 HT-197846 4 HeaterTube(800W,3.63A) 220V(Quartz) 14.5 HO-199106 4 Heater Tube (700W, 2.91A) 240V (Metal) 11.6 HO-197842 4 HeaterTube(19.2Ω,700W,2.91A) 240V(Quartz) 11.6 HT-187847 4 HeaterTube(800W,3.33A) 240V(Quartz) 13.3

214HX 13 GC-197855 4 HeaterTube(16.66Ω,432W,3.6A) 120V(Quartz) 14.4 2N-Z11215* 5 HeaterTube(51.02Ω,800W,3.85A) 208V(MetalExtended)HXETB&HXRETB 19.2 2N-209130 5 HeaterTube(51.02Ω,800W,3.85A) 208V(Metal) 19.3 2N-209130 6 HeaterTube(51.02Ω,800W,3.85A) 208V(Metal) 23.1 HT-197851 3 HeaterTube(59.0Ω,909W,4.37A) 208V(Quartz) 13.1 HT-197845 4 HeaterTube(104V,810W,3.89A)Series 208V(Quartz) 31.1 HT-197851 4 HeaterTube(59.0Ω,909W,4.37A) 208V(Quartz) 17.5 GB-197900 5 HeaterTube(50.8Ω,800W,3.86A) 208V(Quartz) 19.3 HT-197851 5 HeaterTube(59.0Ω,909W,4.37A) 208V(Quartz) 21.9 HT-197846 4 HeaterTube(110V,850W,3.86A)Series 220V(Quartz) 30.9 GB-198037 5 HeaterTube(56.8Ω,800W,3.65A) 220V(Quartz) 18.3 2N-Z11216* 5 HeaterTube(68Ω,800W,3.33A) 240V(MetalExtended)HXETB&HXRETB 16.7 2N-209160 5 HeaterTube(68Ω,800W,3.33A) 240V(Metal) 16.6 GB-199160 5 HeaterTube(68Ω,800W,3.33A) 240V(Metal) 16.7 HT-197850 3 HeaterTube(59.0Ω,921W,3.84A) 240V(Quartz) 11.5 HT-197850 4 HeaterTube(59.0Ω,921W,3.84A) 240V(Quartz) 15.4 GB-197847 4 HeaterTube(120V,810W,6.75A)Series 240V(Quartz) 27 HT-197852 4 HeaterTube(13.49Ω,1000W,4.16A) 240V(Quarts)CE 16.6 HT-197850 5 HeaterTube(59.0Ω,921W,3.84A) 240V(Quartz) 19.2 HX-197895 5 HeaterTube(66.5Ω,815W,3.4A) 240V(Quartz) 15.6

*=NotinterchangeableonHXTBunits

210HX&214HXSeriesElementChart

Rev.J1/27/2012

Unit Voltage/Type Units Amp