mistral-2051 - cybel · 2017-12-28 · mistral-2051 2051nm, 1w cw fiber amplifier 1195 pennsylvania...
TRANSCRIPT
![Page 1: MISTRAL-2051 - Cybel · 2017-12-28 · MISTRAL-2051 2051nm, 1W CW Fiber Amplifier 1195 Pennsylvania Ave. Sales: contact@cybel-llc.com Bethlehem, PA 18018 Phone: 610-691-7012 Website:](https://reader033.vdocuments.net/reader033/viewer/2022043014/5fb2826781d2306ac024e594/html5/thumbnails/1.jpg)
MISTRAL-Amp 20W-2051nm
SCIROCCO –Amp 1W-1950nm
MAESTRO-Amp 20W-2000nm
MAGNI –Laser NL-1W 1950nm
VULCAN -Laser 10W-1950nm
HELIOS -Amp 5W- 2100nm
ASTROLIGTH- Laser 5W-1950nm
Output power 1W
Single frequency operation
Single mode, M² ≃ 1
Compact & rugged design
High Pol Ext. Ratio >20dB
RS232 or USB interface
Standard or All-PM version
Operation Temp: 10 to 40°C
Collimator option
Loss of Signal ( LOS ) protection
Applications CO2 monitoring, DIAL
Testing and Measurement
Preamplifier
LIDAR
Interferometry
Key Features
MISTRAL-2051 2051nm, 1W CW
Fiber Amplifier
1195 Pennsylvania Ave. Sales: [email protected] Bethlehem, PA 18018 Phone: 610-691-7012 Website: www.cybel-llc.com
The CYBEL MISTRAL is a line of thulium-doped fiber amplifiers de-
signed for amplification of eye-safe light in the wavelength range 1920
to 2055nm. Our model MISTRAL-2051 has been specifically de-
signed for operation around the important CO2 absorption near
2051nm. The amplifier can provide more than 1W of single transverse
mode output power for a 1mW, single frequency input at 2051nm.
The MISTRAL-2051 comes as either a standard or an all polarization
maintaining amplifier, that provides the user with stable and high per-
formance over a bandwidth from 2049nm to 2053nm. Output power
and monitoring of key operating parameters such as, automatic cur-
rent control ( ACC ) and automatic power control ( APC ) modes
are controlled from either an RS232 or USB port.
The SKYLINE is an efficient and compact all-fiber OEM unit specifi-
Cybel Thulium & Holmium
Amplifiers & Laser Products
![Page 2: MISTRAL-2051 - Cybel · 2017-12-28 · MISTRAL-2051 2051nm, 1W CW Fiber Amplifier 1195 Pennsylvania Ave. Sales: contact@cybel-llc.com Bethlehem, PA 18018 Phone: 610-691-7012 Website:](https://reader033.vdocuments.net/reader033/viewer/2022043014/5fb2826781d2306ac024e594/html5/thumbnails/2.jpg)
MISTRAL-2051 Specifications
1195 Pennsylvania Ave
Sales: [email protected] Bethlehem, PA 18018
CW-Single mode- Single Frequency- Standard or Linearly Polarized Fiber Amplifier
OPTICAL Unit Value Comments
Wavelength nm 2051 2049 to 2053nm
Input Signal Power mW 1 @2051nm
Input Signal Linewidth MHz < 3
Minimum Output Power W 1
ASE Output Power mW 20 @Pout=1W, Pin=3mW
Polarization Ext. Ratio dB ≥ 20 PM version
Beam Quality (M²) < 1.1
Output Isolator Optional
In/Out Fiber Length m 1 Armored cable, Optional
Fiber Single mode, low bend loss
Monitor Fiber Length m 1, Optional Armored cable, Optional
ELECTRICAL
Voltage V 18 to 30
Warm-up Time min 20
Power Consumption W 30 @Pout max=1W
Interface USB and RS 232
Control Mode
ACC Automatic shut-off with loss of signal
(LOS) or low preset input power
GENERAL
Dimensions mm 215 x 150 x 51 w/o heat sink
Storage Temperature °C -20 to 65
Operating Case Temp. °C 10 to 40
Humidity % 5 to 95 Non condensing
CUSTOMIZATION
The SKYLINE is an amplifier platform that can be customized to match the cus-
tomer ’ s specific requirements. Please contact the Cybel Team
COMPLIANCE with Regulatory Requirements: These OEM products are Class 4
lasers as designated by the Center for Device and Radiology Health( CDRH). As
such they are intended only ifor integration into other equipment and do not comply with CDRH requirements. It is the customer’s responsibility for CDRH certification of the full system that incorporates this industrial laser.