model m26 manifold line for 266 pressure transmitters · m26 manifod ine for 266 pressre...
TRANSCRIPT
— ABB meAsurement & AnAlytics | dAtA sheet
Model M26 Manifold line for 266 pressure transmitters
2 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—Measurement made easyEngineered solutions for all applications
—
Comprehensive wetted material portfolio
—
Accessories available•Bolts and brackets allow multiple installations and grant full transmitter
support
—
Tee bars easily manoeuvrable
—
Tailored manifold to meet user’s needs
—
Perfect interface •between process and transmitter thanks to the most common connection
types
—
Colour coded functional identification
3M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—Functional specifications
Manifold pressure rating vs. process temperature:Standard PTFE packing and gaskets
PTFE propertiesMechanical properties
PtFe has good tensile properties different from other plastic materials as it may be used over a wide temperature range from – 250°c to +250°c ( -418°F to +482°F ) . PtFe shows the lowest friction values compared to other plastic materials. Furthermore, being the static friction values almost equal to the dynamic friction values, there is no tendency to seizure within a sliding system situation, and therefore no detachment friction.
Electrical propertiesPtFe has very good electrical properties. dielectric strength is excellent and remains unchanged even at high temperature, it only decreases depending on the material thickness and on the electrical frequency values. dielectric constant values and dissipation factor are among the lowest values and remain unchanged even at high temperatures and at a wide frequency range. Good resistance to arc and corona effect.
Other propertiesPtFe surfaces are highly anti adhesive and do not absorb moisture. PtFe is non-toxic and can be used in contact with food. there are some limitations only for some kinds of filled PtFe due to the toxicity of some filling elements ( i.e. heavy metals and its compounds ) .
External agents resistancePtFe is considered inert towards nearly all known chemical elements and it is insoluble in all solvents. it is only attached by elemental alkali metals, and by chlorine trifluoride and elemental Fluorine at high temperatures and pressures. Fluorinated hydrocarbons can have a swelling effect on PtFe but it is a reversible situation, while some fluorinated oils, around 300°c ( 5 72°F ) temperature, swell anddissolve PtFe. PtFe is completely untouched by light and atmospheric agents. its resistance to nuclear radiations is rather low, it is affected by it starting from 105 rad. with a lowering of the tensile properties.
Manifold pressure rating vs. process temperature:optional Graphoil packing and gaskets
Graphoil propertiesMechanical properties
Graphoil may be used over a wide temperature range from – 250°c to +600°c ( -400°F to +1112°F ) . it features high resistance to corrosion, heat and fire. Graphoil is generally used in high temperature processes where thermal and/or mechanical shocks can occur. it provides an excellent seal even with low torques or irregular flange surfaces.
Other propertiesGraphoil is a packing and gasket material made exclusively from natural graphite flake. its high degree of chemical compatibility makes Graphoil inert to most chemicals and gases with the exception of strong oxidizing agents.
4 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—...Functional specifications
Standard supplied partsm26 manifolds are always supplied with:• PtFe gaskets for transmitter connection (for
flanged models)• 1 or 2 Plugs 1/4“ nPt-m (according to the selected
model)• carbon steel bolts• certificate of compliance with the order
en10204-2.1• inspection certificate en 10204-3.1 of process
wetted parts.
ImportantPlease ask for a supplementary check if your application is close to the limits shown in the above picture (230°c and/or 6000 psi).
Importantthe maximum working temperature of the whole assembly (manifold and instrument) corresponds to the temperature limit of the pressure transmitter.
ImportantWhen the manifold is assembled to a 2600t pressure transmitter with nAce compliance A4-50 stainless steel bolts (available on request), please note that the maximum working pressure is limited to 210 bar (3045 psi).
5M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—
Specification – physical(refer to ordering information sheets for variant availability related to specific model or versions code)
MaterialsBody, bonnet and nut
Aisi 316 l ss; hastelloy c-276™; monel 400™; inconel 625
Mounting bracket (*)Zinc plated carbon steel; Aisi 316 l ss.
Gaskets PtFe, other available on request.
BoltsZinc plated carbon steel; Aisi 316 ss bolts and nuts class A4–50 per uni 7323 (isO 3506), in compliance with nAce mr0175 class ii (as option).
(*) The mounting bracket kit contains:
bracket, U-bolts, cap screws, nuts, lock washers, spacers and
assembling instruction.
6 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—Configuration
Two-valve manifold configurations(refer to ordering information sheets for options related to specific model or versions code)
M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connectionsinlet (process connection) 1/2in.-14NPTmaleOutlet (transmitter side) 1/2in.-14NPTfemale
drain 1/4in.-18NPTfemale
Packing PtFerating 690bar(69MPa,10000psi)included accessory 1plug1/4in.-18NPTmale
M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connections
inlet (process connection) 1/2in.-14NPTfemale
Outlet (transmitter side) 1/2in.-14NPTmale
drain 1/4in.-18NPTfemale
Packing PtFerating 690bar(69MPa,10000psi)included accessory 1plug1/4in.-18NPTmale
M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connections
inlet (process connection) 1/2in.-14NPTmale
Outlet (transmitter side) 1/2in.-14NPTfemale
drain 1/4in.-18NPTfemale
Packing PtFerating 690bar(69MPa,10000psi)included accessory 1plug1/4in.-18NPTmale
Note:
For details about the correct codification of each single model of
manifold, please refer to the ordering information at the end of this
document.
7M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
M26.P.A.S.2.V. - Two-valve bar stock manifold. Threaded connectionsinlet (process connection) 1/2in.-14NPTfemaleOutlet (transmitter side) 1/2in.-14NPTfemale
drain 1/4in.-18NPTfemale
Packing PtFerating 690bar(69MPa,10000psi)included accessory 1plug1/4in.-18NPTmale
M26.D.A.S.2.V. - Two-valve bar stock manifold for DP Style transmitters
Body configuration For standard flanges transmitters
inlet (process connection) 1/2in.-14NPTfemaleOutlet (transmitter side) FlangedaccordingIEC61518/B
drain 1/4in.-18NPTfemale
Packing PtFerating 413.3bar(41.37MPa,6000psi)
included accessory
1plug1/4in.-18NPTmale1PTFEgasketfortransmitterflangedside(IEC61518/B)2Carbonsteelscrews7/16in.UNF(length2in.)
M26.D.A.V.2.V. - Two-valve bar stock manifold for DP Style transmitters
Body configuration For vertical flanges transmitters
inlet (process connection) 1/2in.-14NPTfemaleOutlet (transmitter side) FlangedaccordingIEC61518/B
drain 1/4in.-18NPTfemale
Packing PtFerating 413.3bar(41.37MPa,6000psi)
included accessory
1plug1/4in.-18NPTmale1PTFEgasketfortransmitterflangedside(IEC61518/B)2Carbonsteelscrews7/16in.UNF(length13/4in.)
Note:
For details about the correct codification of each single model of
manifold, please refer to the ordering information at the end of this
document.
8 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—...Configuration
Three-valve manifold configurations(refer to ordering information sheets for options related to specific model or versions code)
M26.D.A.S.3.V. - Three-valve bar stock manifold for DP transmittersBody configuration For standard flanges transmittersinlet (process connection) 1/2in.-14NPTfemaleOutlet (transmitter side) FlangedaccordingIEC61518/B
drain 1/4in.-18NPTfemale
Packing PtFerating 413.3bar(41.37MPa,6000psi)
included accessories
2plug1/4in.-18NPTmale2PTFEgasketfortransmitterflangedside(IEC61518/B)4Carbonsteelscrews7/16in.UNF(length2in.)
M26.D.A.V.3.V. - Three-valve bar stock manifold for DP transmitters
Body configuration For vertical flanges transmitters
inlet (process connection) 1/2in.-14NPTfemaleOutlet (transmitter side) FlangedaccordingIEC61518/B
drain 1/4in.-18NPTfemale
Packing PtFerating 413.3bar(41.37MPa,6000psi)
included accessories
2plug1/4in.-18NPTmale
2PTFEgasketfortransmitterflangedside(IEC61518/B)4Carbonsteelscrews7/16in.UNF(length13/4in.)
Note:
For details about the correct codification of each single model of
manifold, please refer to the ordering information at the end of this
document.
9M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
Three-valve manifold configurations(refer to ordering information sheets for options related to specific model or versions code)
M26.D.A.S.5.V. - Five-valve bar stock manifold for DP transmittersBody configuration For standard flanges transmittersinlet (process connection) 1/2in.-14NPTfemaleOutlet (transmitter side) FlangedaccordingIEC61518/B
drain 1/4in.-18NPTfemale
Packing PtFerating 413.3bar(41.37MPa,6000psi)
included accessories
2plug1/4in.-18NPTmale2PTFEgasketfortransmitterflangedside(IEC61518/B)4Carbonsteelscrews7/16in.UNF(length2in.)
M26.D.A.V.5.V. - Five-valve bar stock manifold for DP transmitters
Body configuration For vertical flanges transmitters
inlet (process connection) 1/2in.-14NPTfemaleOutlet (transmitter side) FlangedaccordingIEC61518/B
drain 1/4in.-18NPTfemale
Packing PtFerating 413.3bar(41.37MPa,6000psi)
included accessories
2plug1/4in.-18NPTmale
2PTFEgasketfortransmitterflangedside(IEC61518/B)4Carbonsteelscrews7/16in.UNF(length13/4in.)
Note:
For details about the correct codification of each single model of
manifold, please refer to the ordering information at the end of this
document.
10 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT male inlet and 1/2 in. - 14 NPT female outlet);pressure rating 690 bar (69 MPa, 10000 psi)
M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT female inlet and 1/2 in. - 14 NPT male outlet);pressure rating 690 bar (69 MPa, 10000 psi)
22 (0.87)
148 (5.83)
VEN
T.
ISO
LATE
FULLY OPEN
57 (2
.24
)
30 (1
.18)
1/4" NPT-F DRAIN
30 (1.18)
IN
120
(4.7
2)
OU
T
30 (1.18)
56 (2
.20
)
30 (1
.18)
22 (0.87)
Ø5,5 (0.21)
148 (5.83)
VEN
T.
ISO
LAT
E
FULLY OPEN12
0 (4
.72)
OU
TIN
1/4" NPT-F DRAIN
11M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT male inlet and outlet);pressure rating 690 bar (69 MPa, 10000 psi)
Ø5,5 (0.22)
120 (4
.73)
34 (1.34
)30
(1.18)
143 (5.63)
22 (0.87)
FULLY OPEN
1/4" NPT-F DRAIN
ISOLATE
VENT
30 (1.18)
OU
TIN
12 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)M26.P.A.S.2.V. Two-valve manifold with threaded connection (1/2 in. - 14 NPT female inlet and female outlet);pressure rating 690 bar (69 MPa, 10000 psi)
VEN
T.
50 (1.97)
1/4" NPT-F DRAININ
OU
T
60 (2
.36)
168 (6.61)
30 (1
.18)
VEN
T.
ISO
LAT
EIS
OLA
TE
FULLY OPEN
N°2 FIXING HOLES Ø7 (0.27)
13M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
M26.D.A.V.2.V. Two-valve manifold for vertical flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet andflanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).
2x Ø12 (0.47)
1/4" NPT-F DRAIN
INLET SIDE1/2" NPT-F
INSTRUMENT SIDE(IEC 61518/B)
ISOLATE
VENT
32 (1.30)
108,
2 (4
.26)
20 (0.79)
75 (2.95)
131,4 (5.17)FULLY OPEN
FULL
Y O
PE
N
10 (0
.39)
42,5 (1.77)
14 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)M26.D.A.S.2.V. Two-valve manifold for standard flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inletand flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).
60 (2
.36) 89
(3.5
0)
40 (1.57)
71,4 (2.81)
41,
3 (1
.63)
18 (0.71)
75 (2.95)
131,4 (5.17)
35 (1.38)
11 (0
.43)
16 (0
.63)
61 (2.40)
M10 x 1.5
1/4" NPT-F DRAIN
2X Ø12 (0.47)
INSTRUMENT SIDE(IEC 61518/B)
FULLY OPENFULLY OPEN
INLET SIDE1/2" NPT-F
VENT
ISOLATE
FULL
Y O
PE
N
15M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
M26.D.A.S.3.V. Three-valve manifold for standard flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inletand flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).
105 (4.13)
217,8 (8.57)
54 (2.13)
41,
3 (1
.63)
4x Ø12
(0.47)
72,9 (2.87)
40 (1.57)
60 (2
.36)
88,1
(3.4
7)
INSTRUMENT SIDE(IEC 61518/B)
INLET SIDE2x 1/2" NPT-F
FULL
Y O
PE
N
FULLY OPEN
20 (0
.79)
30 (1.18)84 (3.30)
16 (0
.63)
EQUALISE
ISOLATEISOLATE
2x 1/4" NPT-F DRAIN2x M10x1.5
16 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)M26.D.A.V.3.V. Three-valve manifold for vertical flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inletand flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).
80 (3.15)
16 (0
.63)
41,
3 (1
.63)
54 (2.13)
150 (5.90)
258 (9.96)
Ø12
(0.4
7)
85 (3.35)
10 (0
.39)
2x 1/4" NPT-F DRAIN
ISOLATEISOLATE
EQUALISE
2x M10x1.5
70 (2
.75)
32 (1.26)
126,
3 (4
.97)
FULL
Y O
PE
N
INSTRUMENT SIDE(IEC 61518/B)
INLET SIDE
2x 1/2" NPT-F
17M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
M26.D.A.S.5.V. Five-valve manifold for standard flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inletand flanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).
Ø12
(0.4
7)
54 (2.13)
155 (6.10)
267,8 (10.54)
41,
3 (1
.63)
40 (1.57)
71,4 (2.81)
109
(4.2
9)
60 (2
.36)
30 (1.18)
115 (4.53)
30 (1
.18)
24 (0
.94
)
INLET SIDE
2x 1/2" NPT-F
INSTRUMENT SIDE
(IEC 61518/B)
EQUALISE
ISOLATEISOLATE
2x 1/4" NPT-F DRAIN
2x M10 FIXING HOLES
VENTVENT
18 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)M26.D.A.V.5.V. Five-valve manifold for vertical flanges DP Style transmitters; 1/2 in. - 14 NPT female threaded inlet andflanged outlet according to IEC 61518/B (transmitter side); pressure rating 413.7 bar (41.37 MPa, 6000 psi).
41,
3 (1
.63)
54 (2.13)
150 (5.90)
262,8 (10.35)
80 (3.15)
16 (0
.63)
70 (2
.75)12
6,3
(4.9
8)
32 (1.26)INSTRUMENT SIDE
(IEC 61518/B)
INLET SIDE
2x 1/2" NPT-F
VENT
ISOLATE
EQUALISE
ISOLATE
VENT
FULL
Y O
PE
N
85 (3.35) 2x 1/4" NPT-F DRAIN
FULLY OPEN
2x M10x1.5
19M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V.(1/2 in. - 14 NPT male inlet and 1/2 in. - 14 NPT female outlet threaded connection).
Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V.(1/2 in. - 14 NPT female inlet and 1/2 in. - 14 NPT male outlet threaded connection).
116 (4.57)
72 (2.83)
62 (2
.44
)
282
(11.
08)
224
(8.8
2)
105 (4.12)
18 (0.71)Space for
cover removal
58 (2.28)
9 (0.35)91 (3.58)16
2 (6
.37)
143 (5.63)
36 (1
.42)
49 (1.93)
1/2" - 14 NPT
162
(6.3
5)
18 (0.71)Space forcover removal
78 (3.04)55 (2.16)
116 (4.57)
72 (2.83)
62 (2
.44
)
282
(11.
08)
224
(8.8
2)
105 (4.12)
18 (0.71)Space for
cover removal
58 (2.28)
9 (0.35)91 (3.58)
148 (5.83)
36 (1
.42)
49 (1.93)
179
(7.0
2)
1/2" - 14 NPT
142
(5.5
7)Space forcover removal
18 (0.71)78 (3.04)55 (2.16)
20 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V.(1/2 in. - 14 NPT male inlet and outlet threaded connection).
Gauge or absolute pressure transmitter (266HSH, 266GSx, 266ASx) on its mounting bracket with M26.P.A.S.2.V.(1/2 in. - 14 NPT female inlet and outlet threaded connection).
116 (4.57)
72 (2.83)
62 (2
.44
)
282
(11.
08)
102
(3.9
9)
105 (4.12)
18 (0.71)Space for
cover removal
58 (2.28)
9 (0.35)91 (3.58)16
2 (6
.37)
168 (6.61)
36 (1
.42)
1/2" - 14 NPT
18 (0.71)Space forcover removal
78 (3.04)55 (2.16)
116 (4.57)
72 (2.83)
62 (2
.44
)
282
(11.
08)
102
(3.9
9)
105 (4.12)
18 (0.71)Space for
cover removal
58 (2.28)
9 (0.35)91 (3.58)
162
(6.3
7)
168 (6.61)
36 (1
.42)
1/2" - 14 NPT
18 (0.71)Space forcover removal
78 (3.04)55 (2.16)
21M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
Pressure transmitter DP-Style (266PSH, 266VSH, 266RSx) on manifold bracket with M26.D.A.S.2.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)
Pressure transmitter DP-Style (266PSH, 266VSH, 266RSx) with vertical flanges on manifold bracket with M26.D.A.V.2.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)
18 (0.71)91 (3.58) Space for
cover removal15
8 (6
.23)
179
(7.0
2)
58 (2.28)
9 (0.35)
88 (3.45)
208
(8.1
9)
18 (0.71)Space forcover removal
78 (3.04)55 (2.16)
88 (3.43)
104 (4.06)
71 (2.77)
18 (0.71)91 (3.58) Space for
cover removal
92 (3
.63)
243
(9.5
7)
50 (1.97)
48
(1.8
9)
58 (2.28)
9 (0.35)
118 (4.63)
18 (0.71)Space forcover removal
78 (3.04)55 (2.16)
144 (5.68)
217 (8.55)
22 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—...Mounting dimensions (not for construction unless certified) – dimensions in mm (inch)Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.S.3.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)
Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.V.3.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)
18 (0.71)91 (3.58) Space for
cover removal15
8 (6
.23)
179
(7.0
2)
54 (2.13)
58 (2.28)
9 (0.35)
217.8 (8.57)
208
(8.1
9)
18 (0.71)Space forcover removal
78 (3.04)55 (2.16)
88 (3.43)
11 (0
.43)
142 (5.59) 104 (4.06)
71 (2.77)
18 (0.71) 18 (0.71)91 (3.58) Space for
cover removal
92 (3
.63)
229
(9.0
1)
258 (9.96)
62 (2
.45)
78 (3.04)58 (2.28)
9 (0.35) Space forcover removal
55 (2.16)
144 (5.68)236 (9.28)
23M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.S.5.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)
Differential pressure transmitter (266DSH, 266MSH) on manifold bracket with M26.D.A.V.5.V.(1/2 in. - 14 NPT female threaded inlet and flanged outlet according to IEC 61518/B)
18 (0.71)91 (3.58) Space for
cover removal
158
(6.2
3)17
9 (7
.02)
54 (2.13)
58 (2.28)
9 (0.35)
267.8 (10.54)
208
(8.1
9)
18 (0.71)Space forcover removal
78 (3.04)55 (2.16)
88 (3.43)
11 (0
.43)
104 (4.06)
71 (2.77)
18 (0.71) 18 (0.71)91 (3.58) Space for
cover removalSpace forcover removal
92 (3
.63)
229
(9.0
1)
262.8 (10.35)
62 (2
.45)
78 (3.04)55 (2.16)
58 (2.28)
9 (0.35)
144 (5.68)
236 (9.28)
24 M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
—Ordering informationMain ordering information for model M26 manifold
select one character or set of characters from each category and specify complete catalogue number.refer to additional ordering information and specify one or more codes for each transmitter if additional options are required.
Base model - 1st to 3rd characters M 2 6 X X X X X X X X X X
Manifold model for pressure transmitter
Design - 4th character
manifold for dP style transmitters d
manifold for P style transmitters P
Revision - 5th character
revision A A
Body configuration - 6th character
standard construction s
For vertical-flange transmitter (Note:1) V
Valves - 7th character
two-valve manifold 2
three-valve manifold (Note:1) 3
Five-valve manifold (Note:1) 5
Valve Type - 8th character
standard V
Material (wetted parts) - 9th character
StainlesssteelAISI316L nAce s
Hastelloy®C-276 nAce h
Monel400 m
Inconel625 n
Packing material - 10th character
PtFe P
Graphoil G
Gasket material (wetted parts) - 11th character
none (Note:2) n
PtFe (Notes:1,5) P
Graphoil (Notes:1,6) G
Manifold process connection (INLET)- 12th character
Threaded1/2in.-14NPT-female F
Threaded1/2in.-14NPT-male (Note:2) m
Manifold transmitter connection (OUTLET)- 13th character
FlangedoutletaccordingtoIEC61518/B (Note:1) 1
Threaded1/2in.-14NPT-female (Note:2) F
Threaded1/2in.-14NPT-male (Note:2) m
25M26 Manifold line for 266 pressure transMit ters | ds/M26-en rev. H
M26 X X X X X X X X X X X X X X X X X
Rating - 14th character
413.7bar(41.37MPa,6000psi) (Note:1) 6
690bar(69MPa,10000psi) (Note:2) 1
Transmitter fixing bolts - 15th characters
none (Note:2) n
carbon steel (Note:1) c
StainlessSteelNACEcompliant(MWP=21MPa,210bar,3045psi) (Note:1) s
Bracket kit - 16th character
none n
carbon steel bracket kit for pipe mounting (Notes:1,3) c
stainless steel bracket kit for pipe mounting (Notes:1,4) s
Material traceability - 17th character
InspectioncertificateEN10204–3.1ofprocesswettedparts 2
note 1: not available with design code Pnote 2: not available with design code dnote 3: not available with bolts code snote 4: not available with bolts code cnote 5: not available with packing material code Gnote 6: not available with packing material code P
Standard delivery items (can be differently specified by ordering code)• PtFe gaskets for transmitter connection (for flanged models)• 1 or 2 Plugs 1/4“ nPt-m (according to the selected manifold model)• carbon steel bolts• certificate of compliance with the order en10204-2.1• inspection certificate en 10204-3.1 of process wetted parts.
nAce cOnFOrmity is AccOrdinG tO recommendations Per mr0175 2003 / isO 15156-3 FOr Aisi 316l,hAstellOy c-276, incOnel 625 And mOnel 400
3 and 5 valve m26 manifolds are in compliance with Asme B31.1 - Power Piping.
Trademarks ™ hastelloy c-276 is a cabot corporation trademark ™ monel is an international nickel co. trademark
manifold made in italy by sAmi instruments srl
DS
/M
26
-EN
RE
v.
H 1
1.20
18
—ABB Ltd. Measurement & AnalyticsHoward Road St. Neots Cambridgeshire PE19 8EU UK Tel: +44 (0)1480 475321 Fax: +44 (0)1480 217948
ABB Inc. Measurement & Analytics125 E. County Line Road Warminster PA 18974 USA Tel: +1 215 674 6000 Fax: +1 215 674 7183
abb.com/measurement
ABB S.p.A. Measurement & Analyticsvia Luigi vaccani 4 22016 Tremezzina Loc. Ossuccio (CO) Italy Tel: +39 0344 58111
We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.
We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents – in whole or in parts – is forbidden without prior written consent of ABB.
© Copyright 2018 ABBAll rights reserved 3KXP7200007R1001