modeling the atmospheric transport and deposition of mercury · 2c→hg0 t*e((31.971*t)-12595.0)/t)...
TRANSCRIPT
![Page 1: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/1.jpg)
Modeling the Atmospheric Transport and Deposition of Mercury
Materials assembled for“Mercury in Maryland” Meeting, Appalachian Lab, Univ. of Maryland Center for Environmental Science
301 Braddock Road, Frostburg MD, Nov 2-3, 2005
Dr. Mark CohenNOAA Air Resources Laboratory
1315 East West Highway, R/ARL, Room 3316
Silver Spring, Maryland, 20910301-713-0295 x122;
[email protected]://www.arl.noaa.gov/ss/transport/cohen.html
![Page 2: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/2.jpg)
1. Atmospheric mercury modeling
3. What do atmospheric mercury models need?
2. Why do we need atmospheric mercury models?
4. Some preliminary results:
Model evaluation
Source Receptor Information
2
![Page 3: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/3.jpg)
1. Atmospheric mercury modeling
3. What do atmospheric mercury models need?
2. Why do we need atmospheric mercury models?
4. Some preliminary results:
Model evaluation
Source Receptor Information
3
![Page 4: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/4.jpg)
CLOUD DROPLET
cloud
PrimaryAnthropogenic
Emissions
Hg(II), ionic mercury, RGMElemental Mercury [Hg(0)]
Particulate Mercury [Hg(p)]
Re-emission of previously deposited anthropogenic
and natural mercury
Hg(II) reduced to Hg(0) by SO2 and sunlight
Hg(0) oxidized to dissolved Hg(II) species by O3, OH,
HOCl, OCl-
Adsorption/desorptionof Hg(II) to/from soot
Naturalemissions
Upper atmospherichalogen-mediatedheterogeneous oxidation?
Polar sunrise“mercury depletion events”
Br
Dry deposition
Wet deposition
Hg(p)
Vapor phase:
Hg(0) oxidized to RGM and Hg(p) by O3, H202, Cl2, OH, HCl
Multi-media interface
Atmospheric Mercury Fate Processes
4
![Page 5: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/5.jpg)
NOAA HYSPLIT MODEL
5
![Page 6: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/6.jpg)
6
![Page 7: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/7.jpg)
1. Atmospheric mercury modeling
3. What do atmospheric mercury models need?
2. Why do we need atmospheric mercury models?
4. Some preliminary results:
Model evaluation
Source Receptor Information
7
![Page 8: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/8.jpg)
Why do we need atmospheric mercury models?
to get comprehensive source attribution information ---we don’t just want to know how much is depositing at any given location, we also want to know where it came from…
to estimate deposition over large regions, …because deposition fields are highly spatially variable, and one can’t measure everywhere all the time…
to estimate dry deposition
to evaluate potential consequences of alternative future emissions scenarios
![Page 9: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/9.jpg)
But modelsmust have measurements Modeling
needed to help interpret measurements and estimate source-receptor relationships
Monitoring required to develop models and to evaluate their accuracy
![Page 10: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/10.jpg)
1. Atmospheric mercury modeling
3. What do atmospheric mercury models need?
2. Why do we need atmospheric mercury models?
4. Some preliminary results:
Model evaluation
Source Receptor Information
10
![Page 11: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/11.jpg)
EmissionsInventories
MeteorologicalData
Scientific understanding ofphase partitioning, atmospheric chemistry, and deposition processes
Ambient data for comprehensive model evaluation and improvement
What do atmospheric mercury models need?
11
![Page 12: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/12.jpg)
• Mercury Deposition Network (MDN) is great, but:• also need RGM, Hg(p), and Hg(0) concentrations• also need data above the surface (e.g., from aircraft)• also need source-impacted sites (not just background)
ambient data for model evaluation
• what is RGM? what is Hg(p)?• accurate info for known reactions? • do we know all significant reactions?• natural emissions, re-emissions?
scientific understanding
• precipitation not well characterizedmeteorological data
• need all sources• accurately divided into different Hg forms• U.S. 1996, 1999, 2003 / CAN 1995, 2000, 2005• temporal variations (e.g. shut downs)
emissions inventories
some challenges facing mercury modeling
12
![Page 13: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/13.jpg)
0 - 15 15 - 30 30 - 60 60 - 120 120 - 250distance range from source (km)
0.001
0.01
0.1
1
10
100hy
poth
etic
al 1
kg/
day
sour
cede
posi
tion
flux
(ug/
m2-
yr) f
or
Hg(II) emitHg(p) emit
Hg(0) emit
Logarithmic
Why is emissions speciation information critical?
13Hypothesized rapid reduction of Hg(II) in plumes? If true, then dramatic impact on modeling results…
![Page 14: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/14.jpg)
• Mercury Deposition Network (MDN) is great, but:• also need RGM, Hg(p), and Hg(0) concentrations• also need data above the surface (e.g., from aircraft)• also need source-impacted sites (not just background)
ambient data for model evaluation
• what is RGM? what is Hg(p)?• accurate info for known reactions? • do we know all significant reactions?• natural emissions, re-emissions?
scientific understanding
• precipitation not well characterizedmeteorological data
• need all sources• accurately divided into different Hg forms• U.S. 1996, 1999, 2003 / CAN 1995, 2000, 2005• temporal variations (e.g. shut downs)
emissions inventories
some challenges facing mercury modeling
14
![Page 15: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/15.jpg)
• Mercury Deposition Network (MDN) is great, but:• also need RGM, Hg(p), and Hg(0) concentrations• also need data above the surface (e.g., from aircraft)• also need source-impacted sites (not just background)
ambient data for model evaluation
• what is RGM? what is Hg(p)?• accurate info for known reactions? • do we know all significant reactions?• natural emissions, re-emissions?
scientific understanding
• precipitation not well characterizedmeteorological data
• need all sources• accurately divided into different Hg forms• U.S. 1996, 1999, 2003 / CAN 1995, 2000, 2005• temporal variations (e.g. shut downs)
emissions inventories
some challenges facing mercury modeling
15
![Page 16: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/16.jpg)
GAS PHASE REACTIONS
AQUEOUS PHASE REACTIONS
ReferenceUnitsRateReaction
Xiao et al. (1994); Bullock and Brehme (2002)
(sec)-1 (maximum)6.0E-7Hg+2 + h<→ Hg0
eqlbrm: Seigneur et al. (1998)
rate: Bullock & Brehme (2002).
liters/gram;t = 1/hour
9.0E+2Hg(II) ↔ Hg(II) (soot)
Lin and Pehkonen(1998)(molar-sec)-12.0E+6Hg0 + OCl-1 → Hg+2
Lin and Pehkonen(1998)(molar-sec)-12.1E+6Hg0 + HOCl → Hg+2
Gardfeldt & Jonnson (2003)(molar-sec)-1~ 0Hg(II) + HO2C→ Hg0
Van Loon et al. (2002)T*e((31.971*T)-12595.0)/T) sec-1
[T = temperature (K)]HgSO3 → Hg0
Lin and Pehkonen(1997)(molar-sec)-12.0E+9Hg0 + OHC→ Hg+2
Munthe (1992)(molar-sec)-14.7E+7Hg0 + O3 → Hg+2
Sommar et al. (2001)cm3/molec-sec8.7E-14Hg0 +OHC→ Hg(p)
Calhoun and Prestbo (2001)cm3/molec-sec4.0E-18Hg0 + Cl2 → HgCl2
Tokos et al. (1998) (upper limit based on experiments)
cm3/molec-sec8.5E-19Hg0 + H2O2 → Hg(p)
Hall and Bloom (1993)cm3/molec-sec1.0E-19Hg0 + HCl → HgCl2
Hall (1995)cm3/molec-sec3.0E-20Hg0 + O3 → Hg(p)
Atmospheric Chemical Reaction Scheme for Mercury
16
![Page 17: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/17.jpg)
• Mercury Deposition Network (MDN) is great, but:• also need RGM, Hg(p), and Hg(0) concentrations• also need data above the surface (e.g., from aircraft)• also need source-impacted sites (not just background)
ambient data for model evaluation
• what is RGM? what is Hg(p)?• accurate info for known reactions? • do we know all significant reactions?• natural emissions, re-emissions?
scientific understanding
• precipitation not well characterizedmeteorological data
• need all sources• accurately divided into different Hg forms• U.S. 1996, 1999, 2003 / CAN 1995, 2000, 2005• temporal variations (e.g. shut downs)
emissions inventories
some challenges facing mercury modeling
17
![Page 18: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/18.jpg)
Some Additional Measurement Issues (from a modeler’s perspective)
• Data availability• Simple vs. Complex Measurements
![Page 19: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/19.jpg)
Some Additional Measurement Issues (from a modeler’s perspective)
• Data availability• Simple vs. Complex Measurements
![Page 20: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/20.jpg)
Data availabilityA major impediment to evaluating and improving atmospheric Hg models has been the lack of speciated Hg air concentration data
There have been very few measurements to date, and these data are rarely made available in a practical way (timely, complete, etc.)
The data being collected at Piney Reservoir could be extremely helpful!
![Page 21: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/21.jpg)
Some Additional Measurement Issues (from a modeler’s perspective)
• Data availability• Simple vs. Complex Measurements
![Page 22: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/22.jpg)
wet depmonitor
Simple vs. Complex Measurements: 1. Wet deposition is a very complicated phenomena...
many ways to get the “wrong” answer –incorrect emissions, incorrect transport, incorrect chemistry, incorrect 3-D precipitation, incorrect wet-deposition algorithms, etc..
ambient air monitor
models need ambient air concentrations first, and then if they can get those right, they can try to do wet deposition...
??
?
![Page 23: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/23.jpg)
monitor at ground
level
Simple vs. Complex Measurements: 2. Potential complication with ground-level monitors...
(“fumigation”, “filtration”, etc.)...
monitor abovethe canopy
atmospheric phenomena are complex and not well understood;models need “simple” measurements for diagnostic evaluations;ground-level data for rapidly depositing substances (e.g., RGM) hard to interpretelevated platforms might be more useful (at present level of understanding)
?
![Page 24: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/24.jpg)
Simple vs. Complex measurements - 3. Urban areas:a. Emissions inventory poorly knownb. Meteorology very complex (flow around buildings)c. So, measurements in urban areas not particularly useful
for current large-scale model evaluations
![Page 25: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/25.jpg)
• Sampling near intense sources?• Must get the fine-scale met “perfect”
Ok, if one wants to develop hypotheses regardingwhether or not this is actually a source of the pollutant (and you can’t do a stack test for some reason!).
Sampling site?
Simple vs. Complex Measurements –4: extreme near-field measurements
![Page 26: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/26.jpg)
Complex vs. Simple Measurements –5: Need some source impacted measurements
• Major questions regarding plume chemistry and near-field impacts (are there “hot spots”?)
• Most monitoring sites are designed to be “regional background” sites (e.g., most Mercury Deposition Network sites).
• We need some source-impacted sites as well to help resolve near-field questions
• But not too close – maybe 20-30 km is ideal (?)
![Page 27: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/27.jpg)
1. Atmospheric mercury modeling
3. What do atmospheric mercury models need?
2. Why do we need atmospheric mercury models?
4. Some preliminary results:
Model evaluation
Source Receptor Information
27
![Page 28: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/28.jpg)
EMEP Intercomparison Study of Numerical Models for Long-Range Atmospheric Transport of Mercury
BudgetsDry DepWet DepRGMHg(p)Hg0Chemistry
Conclu-sions
Stage IIIStage IIStage IIntro-duction
28
ParticipantsD. Syrakov …………………………….. Bulgaria….NIMHA. Dastoor, D. Davignon ……………… Canada...... MSC-CanJ. Christensen …………………………. Denmark…NERIG. Petersen, R. Ebinghaus …………...... Germany…GKSSJ. Pacyna ………………………………. Norway…..NILUJ. Munthe, I. Wängberg ……………….. Sweden….. IVLR. Bullock ………………………………USA………EPAM. Cohen, R. Artz, R. Draxler ………… USA………NOAAC. Seigneur, K. Lohman ………………..USA……... AER/EPRIA. Ryaboshapko, I. Ilyin, O.Travnikov…EMEP……MSC-E
![Page 29: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/29.jpg)
EMEP Intercomparison Study of Numerical Models for Long-Range Atmospheric Transport of Mercury
BudgetsDry DepWet DepRGMHg(p)Hg0Chemistry
Conclu-sions
Stage IIIStage IIStage IIntro-duction
29
Intercomparison Conducted in 3 Stages
I. Comparison of chemical schemes for a cloud environment
II. Air Concentrations in Short Term Episodes
III. Long-Term Deposition and Source-Receptor Budgets
![Page 30: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/30.jpg)
EMEP Intercomparison Study of Numerical Models for Long-Range Atmospheric Transport of Mercury
BudgetsDry DepWet DepRGMHg(p)Hg0Chemistry
Conclu-sions
Stage IIIStage IIStage IIntro-duction
30
Stage
Hybrid Single Particle Lagrangian Integrated Trajectory model, US NOAAHYSPLIT
MSC-E heavy metal hemispheric model, EMEP MSC-EMSCE-HM-Hem
Acid Deposition and Oxidants Model, GKSS Research Center, Germany ADOM
MSC-E heavy metal regional model, EMEP MSC-EMSCE-HM
Community Multi-Scale Air Quality model, US EPACMAQ
Eulerian Model for Air Pollution, Bulgarian Meteo-serviceEMAP
Chemistry of Atmos. Mercury model, Environmental Institute, SwedenCAM
Mercury Chemistry Model, Atmos. & Environmental Research, USA MCM
Danish Eulerian Hemispheric Model, National Environmental Institute DEHM
Global/Regional Atmospheric Heavy Metal model, Environment CanadaGRAHM
IIIIII
Model Name and InstitutionModel Acronym
Participating Models
![Page 31: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/31.jpg)
EMEP Intercomparison Study of Numerical Models for Long-Range Atmospheric Transport of Mercury
BudgetsDry DepWet DepRGMHg(p)Hg0Chemistry
Conclu-sions
Stage IIIStage IIStage IIntro-duction
31
Anthropogenic Mercury Emissions Inventoryand Monitoring Sites for Phase II
(note: only showing largest emitting grid cells)
Mace Head, Ireland grassland shore Rorvik, Sweden
forested shore
Aspvreten, Sweden forested shore
Zingst, Germanysandy shore
Neuglobsow, Germany forested area
![Page 32: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/32.jpg)
EMEP Intercomparison Study of Numerical Models for Long-Range Atmospheric Transport of Mercury
BudgetsDry DepWet DepRGMHg(p)Hg0Chemistry
Conclu-sions
Stage IIIStage IIStage IIntro-duction
32
Total Gaseous Mercury (ng/m3) at Neuglobsow: June 26 – July 6, 1995
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul01234 MEASURED
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul01234 MSCE
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul01234 CMAQ
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul01234 GRAHM
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul01234 EMAP
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul01234 DEHM
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul01234 ADOM
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul01234 HYSPLIT
![Page 33: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/33.jpg)
EMEP Intercomparison Study of Numerical Models for Long-Range Atmospheric Transport of Mercury
BudgetsDry DepWet DepRGMHg(p)Hg0Chemistry
Conclu-sions
Stage IIIStage IIStage IIntro-duction
33
Total Particulate Mercury (pg/m3) at Neuglobsow, Nov 1-14, 1999
02-Nov 04-Nov 06-Nov 08-Nov 10-Nov 12-Nov 14-Nov0
50
100
150MEASURED
02-Nov 04-Nov 06-Nov 08-Nov 10-Nov 12-Nov 14-Nov0
50
100
150CMAQ
02-Nov 04-Nov 06-Nov 08-Nov 10-Nov 12-Nov 14-Nov0
50
100
150GRAHM
02-Nov 04-Nov 06-Nov 08-Nov 10-Nov 12-Nov 14-Nov0
50
100
150EMAP
02-Nov 04-Nov 06-Nov 08-Nov 10-Nov 12-Nov 14-Nov0
50
100
150DEHM
02-Nov 04-Nov 06-Nov 08-Nov 10-Nov 12-Nov 14-Nov0
50
100
150ADOM
02-Nov 04-Nov 06-Nov 08-Nov 10-Nov 12-Nov 14-Nov0
50
100
150HYSPLIT
02-Nov 04-Nov 06-Nov 08-Nov 10-Nov 12-Nov 14-Nov0
50
100
150MSCE
![Page 34: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/34.jpg)
34
MSCE Neuglobsow RGM
0
10
20
30
40
50
60
9 9 9 9 9 9 9 9 9 9 9 9 9 9
pg/m
3
ObsCalc
CMAQ Neuglobsow RGM
010203040506070
pg/m
3
ObsCalc
ADOM Neuglobsow RGM
010203040506070
pg/m
3
ObsCalc
EMAP Neuglobsow RGM
0
5
10
15
20
25
pg/m
3
ObsCalc
GRAHM Neuglobsow RGM
0
35
70
105
140
pg/m
3
ObsCalc
HYSPLIT Neuglobsow RGM
0
10
20
30
40
50
60
pg/m
3
ObsCalc
EMEP Intercomparison Study of Numerical Models for Long-Range Atmospheric Transport of Mercury
BudgetsDry DepWet DepRGMHg(p)Hg0Chemistry
Conclu-sions
Stage IIIStage IIStage IIntro-duction
DEHM Neuglobsow RGM
0
6
12
18
24
30
pg/m
3
ObsCalc
Reactive Gaseous Mercury at Neuglobsow, Nov 1-14, 1999
![Page 35: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/35.jpg)
EMEP Intercomparison Study of Numerical Models for Long-Range Atmospheric Transport of Mercury
BudgetsDry DepWet DepRGMHg(p)Hg0Chemistry
Conclu-sions
Stage IIIStage IIStage IIntro-duction
35
DE01 DE09 NL91 NO99 SE02 SE11 SE12 SE05 FI96
Monitoring Station
0.0
0.5
1.0
1.5
2.0
2.5
3.0
wet
Hg
depo
sitio
n (g
/km
2-m
onth
)
Obs
MSCE-HM
MSCE-HM-Hem
HYSPLIT
DEHM
EMAP
CMAQ
August 1999 Mercury Wet Deposition
![Page 36: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/36.jpg)
1. Atmospheric mercury modeling
3. What do atmospheric mercury models need?
2. Why do we need atmospheric mercury models?
4. Some preliminary results:
Model evaluation
Source Receptor Information
36
![Page 37: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/37.jpg)
Example ofDetailed Results:1999 Results forChesapeake Bay
37
![Page 38: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/38.jpg)
Geographical Distributionof 1999 Direct Deposition
Contributions to the Chesapeake Bay (entire domain)
38
![Page 39: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/39.jpg)
Geographical Distribution of 1999 Direct Deposition Contributions to the Chesapeake Bay (regional close-up)
39
![Page 40: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/40.jpg)
Geographical Distribution of 1999 Direct Deposition Contributions to
the Chesapeake Bay (local close-up)
40
![Page 41: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/41.jpg)
Largest Regional Individual Sources Contributing to1999 Mercury Deposition Directly to the Chesapeake Bay
41
![Page 42: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/42.jpg)
Largest Local Individual Sources Contributing to1999 Mercury Deposition Directly to the Chesapeake Bay
42
![Page 43: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/43.jpg)
Emissions and Direct Deposition Contributions from Different Distance Ranges Away From the Chesapeake Bay
0 - 100100 - 200
200 - 400400 - 700
700 - 10001000 - 1500
1500 - 20002000 - 2500
> 2500
Distance Range from Chesapeake Bay (km)
0
20
40
60
80
Emis
sion
s (m
etric
tons
/yea
r)
0
2
4
6
8
Dep
ositi
on F
lux
(ug/
m2-
year
)
EmissionsDeposition Flux
43
![Page 44: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/44.jpg)
Top 25 Contributors to 1999 Hg Deposition Directly to the Chesapeake Bay
Phoenix ServicesBrandon Shores
Stericycle Inc. Morgantown
Chalk PointNASA Incinerator
H.A. WagnerNorfolk Navy Yard
Hampton/NASA Incin.Chesapeake Energy Ctr.Chesterfield Yorktown
INDIAN RIVER Roxboro
BALTIMORE RESCO Mt. Storm Homer City Keystone BMWNC
Possum Point Montour
Phoenix ServicesBelews CreekHarrisburg Incin.Harford Co. Incin.
MD MD
MD MD
MD VA MD VA VA VA VA VA DE NC MD WV PA PA NC VA PA MD NC PA MD
0% 20% 40% 60% 80% 100%Cumulative Fraction of Hg Deposition
0
5
10
15
20
25R
ank
coal-fired elec genother fuel combustionwaste incinerationmetallurgicalmanufacturing/other
44
![Page 45: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/45.jpg)
Preliminary Results for other Maryland
Receptors
45
![Page 46: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/46.jpg)
Maryland Receptors Included in Recent Preliminary HYSPLIT-Hg modeling (but modeling was not optimized for these receptors!)
46
![Page 47: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/47.jpg)
Largest Modeled Atmospheric Deposition Contributors Directly to Deep Creek Lake based on 1999 USEPA Emissions Inventory
(national view)
47
![Page 48: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/48.jpg)
Largest Modeled Atmospheric Deposition Contributors Directly to Deep Creek Lake based on 1999 USEPA Emissions Inventory
(regional view)
48
![Page 49: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/49.jpg)
Largest Modeled Atmospheric Deposition Contributors Directly to Deep Creek Lake based on 1999 USEPA Emissions Inventory
(close-up view)
49
![Page 50: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/50.jpg)
Some Next Steps
Expand model domain to include global sources
Additional model evaluation exercises ... more sites, more time periods, more variables
Sensitivity analyses and examination of atmospheric Hg chemistry(e.g. marine boundary layer, upper atmosphere)
Simulate natural emissions and re-emissions of previously deposited Hg
Use more highly resolved meteorological data grids
Dynamic linkage with ecosystem cycling models
50
![Page 51: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/51.jpg)
Conclusions
At present, many model uncertainties & data limitations
Models needed for source-receptor and other info
Monitoring data required to evaluate and improve models
For this, simple may be better than complex measurements
Some useful model results appear to be emerging
Future is much brighter because of this coordination!
51
![Page 52: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/52.jpg)
Thanks
52
![Page 53: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/53.jpg)
EXTRA SLIDES
53
![Page 54: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/54.jpg)
• Hg is present at extremely trace levels in the atmosphere
• Hg won’t affect meteorology (can simulate meteorology independently, and provide results to drive model)
• Most species that complex or react with Hg are generally present at much higher concentrations than Hg
• Other species (e.g. OH) generally react with many other compounds than Hg, so while present in trace quantities, their concentrations cannot be strongly influenced by Hg
•The current “consensus” chemical mechanism (equilibrium + reactions) does not contain any equations that are not 1st order in Hg
• Wet and dry deposition processes are generally 1st order with respect to Hg
Why might the atmospheric fate of mercury emissions be essentially linearly independent?
54
![Page 55: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/55.jpg)
Spatial interpolation
RECEPTOR
Impacts fromSources 1-3are ExplicitlyModeled
2
1
3
Impact of source 4 estimated fromweighted average of impacts of nearbyexplicitly modeled sources
4
55
![Page 56: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/56.jpg)
• Perform separate simulations at each location for emissions of pure Hg(0), Hg(II) and Hg(p)
[after emission, simulate transformations between Hg forms]
• Impact of emissions mixture taken as a linear combination of impacts of pure component runs on any given receptor
56
![Page 57: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/57.jpg)
“Chemical Interpolation”
Source
RECEPTOR
Impact of SourceEmitting30% Hg(0)50% Hg(II)20% Hg(p)
=
Impact of Source Emitting Pure Hg(0)0.3 x
Impact of Source Emitting Pure Hg(II)0.5 x
Impact of Source Emitting Pure Hg(p)0.2 x
++
57
![Page 58: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/58.jpg)
58
![Page 59: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/59.jpg)
Standard Source Locations in Maryland region during recent simulation
59
![Page 60: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/60.jpg)
0 50 100 150 200 250 300 350day of year
0102030405060708090
100
ug/m
2-ye
ar if
dai
ly d
ep c
ontin
uted
at s
ame
rate
daily valueweekly average
Illustrative example of total deposition at a location~40 km "downwind" of a 1 kg/day RGM source
60
![Page 61: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/61.jpg)
Eulerian grid models give
grid-averaged estimates –
…difficult to compare against
measurement at a single location
![Page 62: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/62.jpg)
Geographic Distribution of Largest Anthropogenic Mercury Emissions Sources in the U.S. (1999) and Canada (2000)
62
![Page 63: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/63.jpg)
63
![Page 64: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/64.jpg)
• In principle, we need do this for each source in the inventory
• But, since there are more than 100,000 sources in the U.S. and Canadian inventory, we need shortcuts…
• Shortcuts described in Cohen et al Environmental Research 95(3), 247-265, 2004
64
![Page 65: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/65.jpg)
Cohen, M., Artz, R., Draxler, R., Miller, P., Poissant, L., Niemi, D., Ratte, D., Deslauriers, M., Duval, R., Laurin, R., Slotnick, J., Nettesheim, T., McDonald, J.“Modeling the Atmospheric Transport and Deposition of Mercury to the Great Lakes.” Environmental Research95(3), 247-265, 2004.
Note: Volume 95(3) is a Special Issue: "An Ecosystem Approach toHealth Effects of Mercury in the St. Lawrence Great Lakes", edited by David O. Carpenter.
65
![Page 66: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/66.jpg)
• For each run, simulate fate and transport everywhere,but only keep track of impacts on each selected receptor(e.g., Great Lakes, Chesapeake Bay, etc.)
• Only run model for a limited number (~100) of hypothetical, individual unit-emissions sources throughout the domain
• Use spatial interpolation to estimate impacts from sources at locations not explicitly modeled
66
![Page 67: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/67.jpg)
0.1o x 0.1o
subgridfor near-field analysis
sourcelocation
67
![Page 68: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/68.jpg)
0.1o x 0.1o
subgridfor near-field analysis
sourcelocation
68
![Page 69: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/69.jpg)
69
![Page 70: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/70.jpg)
70
![Page 71: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/71.jpg)
71
![Page 72: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/72.jpg)
72
![Page 73: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/73.jpg)
0 - 15 15 - 30 30 - 60 60 - 120 120 - 250distance range from source (km)
0.001
0.01
0.1
1
10
100
depo
sitio
n flu
x (u
g/m
2-yr
)
Hg(II) emit, 50 mHg(II) emit, 250 mHg(II) emit, 500 mHg(p) emit; 250 mHg(0) emit, 250 m
Source at Lat = 42.5, Long = -97.5; simulation for entire year 1996 using archived NGM meteorological data
Deposition flux within different distance ranges from a hypothetical 1 kg/day source
Hypothesized rapid reduction of Hg(II) in plumes? If true, then dramatic impact on modeling results…
![Page 74: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/74.jpg)
0 - 15 15 - 30 30 - 60 60 - 120 120 - 250distance range from source (km)
0
10
20
30
40
hypo
thet
ical
1 k
g/da
y so
urce
depo
sitio
n flu
x (u
g/m
2-yr
) for
Hg(II) emitHg(p) emit
Hg(0) emit
Linear
Why is emissions speciation information critical?
74
![Page 75: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/75.jpg)
Why is emissions speciation information critical?
0 - 15 15 - 30 30 - 60 60 - 120 120 - 250distance range from source (km)
0
10
20
30
40
hypo
thet
ical
1 k
g/da
y so
urce
depo
sitio
n flu
x (u
g/m
2-yr
) for
Hg(II) emitHg(p) emit
Hg(0) emit
Linear
Logarithmic
0 - 15 15 - 30 30 - 60 60 - 120 120 - 250distance range from source (km)
0.001
0.01
0.1
1
10
100
hypo
thet
ical
1 k
g/da
y so
urce
depo
sitio
n flu
x (u
g/m
2-yr
) for
Hg(II) emitHg(p) emit
Hg(0) emit
75
![Page 76: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/76.jpg)
The form of mercury emissions (elemental, ionic, particulate) is often very poorly known, but is a dominant factor in estimating deposition(and associated source-receptor relationships)
Questions regarding atmospheric chemistry of mercury may also be very significant
The above may contribute more to the overall uncertainties in atmospheric mercury models than uncertainties in dry and wet deposition algorithms
Emissions and Chemistry
![Page 77: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/77.jpg)
EMEP Intercomparison Study of Numerical Models for Long-Range Atmospheric Transport of Mercury
BudgetsDry DepWet DepRGMHg(p)Hg0Chemistry
Conclu-sions
Stage IIIStage IIStage IIntro-duction
77
Neuglobsow
Zingst
AspvretenRorvik
Mace Head
![Page 78: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/78.jpg)
EMEP Intercomparison Study of Numerical Models for Long-Range Atmospheric Transport of Mercury
BudgetsDry DepWet DepRGMHg(p)Hg0Chemistry
Conclu-sions
Stage IIIStage IIStage IIntro-duction
78
Total Gaseous Mercury at Neuglobsow: June 26 – July 6, 1995
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul 00.0
1.0
2.0
3.0
4.0
Tota
l Gas
eous
Mer
cury
(ng/
m3)
MEASURED
NWNW
NW
N
N
S
SE
NW
Neuglobsow
![Page 79: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/79.jpg)
EMEP Intercomparison Study of Numerical Models for Long-Range Atmospheric Transport of Mercury
BudgetsDry DepWet DepRGMHg(p)Hg0Chemistry
Conclu-sions
Stage IIIStage IIStage IIntro-duction
79
Total Gaseous Mercury (ng/m3) at Neuglobsow: June 26 – July 6, 1995
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul01234 MEASURED
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul01234 MSCE
Using default emissions inventory
The emissions inventory is a critical input to the models…
26-Jun 28-Jun 30-Jun 02-Jul 04-Jul 06-Jul01234 MSCE - UBA
Using alternative emissions inventory
![Page 80: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/80.jpg)
Some Additional Measurement Issues (from a modeler’s perspective)
• Data availability• Simple vs. Complex Measurements• Process Information
![Page 81: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/81.jpg)
Process Information: 1. Dry Deposition - Resistance Formulation
1Vd = --------------------------------- + Vg
Ra + Rb + Rc + RaRbVg
in which
• Ra = aerodynamic resistance to mass transfer;
• Rb = resistance of the quasi-laminar sublayer;
• Rc = overall resistance of the canopy/surface (zero for particles)
• Vg = the gravitational settling velocity (zero for gases).
![Page 82: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/82.jpg)
Dry Depositiondepends intimately on vapor/particle partitioning and particle size distribution information
resistance formulation [Ra, Rb, Rc...]
for gases, key uncertainty often Rc (e.g., “reactivity factor” f0)
for particles, key uncertainty often Rb
How to evaluate algorithms when phenomena hard to measure?
![Page 83: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/83.jpg)
Atmosphere above the quasi-laminar sublayer
Quasi-laminar
Sublayer(~ 1 mm
thick)
Surface
Rb
Rc
Ra
Very small particles can
diffuse through the layer like a gas
Very large particles can just fall
through the layerIn-between particles can’t diffuse or fall easily so they have a harder time getting
across the layerWind speed = 0 (?)
Particle dry deposition phenomena
![Page 84: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/84.jpg)
0.0001 0.001 0.01 0.1 1 10 100
particle diameter (microns)
1E-5
0.0001
0.001
0.01
0.1
1
Dep
ositi
on V
eloc
ity (m
/sec
)
Rb assumed small ( = 10 sec/m) Slinn and Slinn
Typical Deposition Velocities Over Water with Different Rb Formulations
Diffusion high;Vd governed by Ra
Diffusion low; Settling velocity low;Vd governed by Rb
Vd = settling velocity
![Page 85: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/85.jpg)
Process information needed:
1. For particle dry deposition, must have particle size distributions!
![Page 86: Modeling the Atmospheric Transport and Deposition of Mercury · 2C→Hg0 T*e((31.971*T)-12595.0)/T) sec-1 Van Loon et al. (2002) [T = temperature (K)] HgSO3 →Hg0 Hg0 + OHC→Hg+2](https://reader036.vdocuments.net/reader036/viewer/2022071016/5fce8e3f34efaa0d106fc3ef/html5/thumbnails/86.jpg)
LAKE
ATMOSPHERE
Pollutant onSuspendedSediment
PollutantTrulyDissolvedin Water
PROCESS INFORMATION:
2. The gas-exchangeflux at a water surface depends on the concentration of pollutant in the gas-phase and the truly-dissolved phase(but these are rarely measured…)
Gas-PhasePollutant
Particle-PhasePollutant