models rt60g, rt60gr, rt72g, rt72gr, rt84g, rt84gr … · 2020. 1. 28. · 2. if the unit has been...

RTG SERIESROTARY TILLERS

MODELS

RT60G, RT60GR, RT72G, RT72GR,

RT84G, RT84GRRevised 11/19

PARTS MANUALSECTION 42

Important Operatingand Safety Instructionsare found in the MowerSafety Video that canbe instantly accessedon the internet at:www.algqr.com/bve

An Operator’s Manual was shipped with the equipment. The Operator’s Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator’s Manual is not with the equipment, contact your dealer or Bush Hog to obtain a copy before operating the equipment.

© 2017 Alamo Group Inc.

To the Owner/Operator/Dealer

All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-mindedoperator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer hasdesigned this implement to be used with all its safety equipment properly attached to minimize the chance ofaccidents.

BEFORE YOU START! Read the safety messages on the implement and shown in your manual. Observe the rulesof safety and common sense!

WARRANTY INFORMATION:Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty RegistrationForm in full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on theWarranty Card and on the Warranty Form that you retain.

LIMITED WARRANTY

Bush Hog warrants to the original purchaser of any new Bush Hog equipment, purchased from an authorized BushHog dealer, that the equipment be free from defects in material and workmanship for a period of one (1) year fornon-commercial, state and municipalities’ use and ninety (90) days for commercial use from date of retail sale. Theobligation of Bush Hog to the purchaser under this warranty is limited to the repair or replacement of defectiveparts.

Replacement or repair parts installed in the equipment covered by this limited warranty are warranted for ninety(90) days from the date of purchase of such part or to the expiration of the applicable new equipment warrantyperiod, whichever occurs later. Warranted parts shall be provided at no cost to the user at an authorized Bush Hogdealer during regular working hours. Bush Hog reserves the right to inspect any equipment or parts which areclaimed to have been defective in material or workmanship.

DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGESBush Hog’s obligation under this limited warranty, to the extent allowed by law, is in lieu of all warranties, implied orexpressed, INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR APARTICULAR PURPOSE and any liability for incidental and consequential damages with respect to the sale oruse of the items warranted. Such incidental and consequential damages shall include but not be limited to:transportation charges other than normal freight charges; cost of installation other than cost approved by BushHog; duty; taxes; charges for normal service or adjustment; loss of crops or any other loss of income; rental ofsubstitute equipment, expenses due to loss, damage, detention or delay in the delivery of equipment or partsresulting from acts beyond the control of Bush Hog.

THIS LIMITED WARRANTY SHALL NOT APPLY:1. To vendor items which carry their own warranties, such as engines, tires, and tubes.

2. If the unit has been subjected to misapplication, abuse, misuse, negligence, fire or other accident.

3. If parts not made or supplied by Bush Hog have been used in connection with the unit, if, in the sole judgementof Bush Hog such use affects its performance, stability or reliability.

4. If the unit has been altered or repaired outside of an authorized Bush Hog dealership in a manner which, in thesole judgement of Bush Hog, affects its performance, stability or reliability.

5. To normal maintenance service and normal replacement items such as gearbox lubricant, hydraulic fluid, wornblades, or to normal deterioration of such things as belts and exterior finish due to use or exposure.

6. To expendable or wear items such as teeth, chains, sprockets, belts, springs and any other items that in thecompany’s sole judgement is a wear item.

NO EMPLOYEE OR REPRESENTATIVE OF BUSH HOG IS AUTHORIZED TO CHANGE THIS LIMITEDWARRANTY IN ANY WAY OR GRANT ANY OTHER WARRANTY UNLESS SUCH CHANGE IS MADE INWRITING AND SIGNED BY BUSH HOG’S SERVICE MANAGER, 2501 GRIFFIN AVE., SELMA, ALABAMA36703.

Record the model number, serial number and date

purchased. This information will be helpful to your

dealer if parts or service are required.

MAKE CERTAIN THE WARRANTY

HAS BEEN FILED WITH BUSH HOG

SELMA, ALABAMA

MODEL NUMBER ________________________________

SERIAL NUMBER ________________________________

DATE OF RETAIL SALE ___________________________

TABLE OF CONTENTS

RTG SERIES ROTARY TILLERSMODELS

RT60G, RT60GR, RT72G, RT72GR, RT84G, RT84GR

Skids, Tailgates And Front Covers .........................................................................42-1-1, 42-1-2

Top Deck And Related Parts RT60G,RT60GR, RT72G, RT72GR .....................................42-1-3

Top Deck And Related Parts RT84G, RT84GR S/N 1HDLR1171240096 and Below ........42-1-4

Top Deck And Related Parts RT84G, RT84GR S/N 1HDLR1171240097 and ABOVE......42-1-5

Drives, Driveline And Related Parts....................................................................................42-1-6

Driveshaft Assembly ...............................................................................................42-1-7, 42-1-8

Driveshaft Shielding RT84G, RT84GR ..............................................................................42-1-9

Center Gearbox Assembly ................................................................................................42-1-10

Side Gearbox Assembly .....................................................................................42-1-11, 42-1-12

Outboard Hub Assembly ...................................................................................................42-1-13

Five Foot Tine Bar Assembly ............................................................................................42-1-14

Six Foot Tine Bar Assembly..............................................................................................42-1-15

Seven Foot Tine Bar Assembly.........................................................................................42-1-16

Hitch Extension Kit (Optional) ...........................................................................................42-1-17

Decals.................................................................................................................42-1-18, 42-1-19


September, 2019

Material Handling Repair Parts Manual

42-1-1


Item Part Description Qty.No. No. Req’d.

1 50074817-10 Tailgate (Red) for 5’ Models 1

50074817-16 Tailgate (Green) for 5’ Models 1

50074817-23 Tailgate (Orange) for 5’ Models 1

50074817-28 Tailgate (Blue) for 5’ Models 1

50074818-10 Tailgate (Red) for 6’ Models 1

50074818-16 Tailgate (Green) for 6’ Models 1

50074818-23 Tailgate (Orange) for 6’ Models 1

50074818-28 Tailgate (Blue) for 6’ Models 1

2 50074125 Shackle, Anchor 1

3 50029803 Chain, 9 Link 1

4 50075127 Tailgate Rod, 5’ Models 1

50075097 Tailgate Rod, 6’ Models 1

5 50074827 Skid Weldment, LH 1

6 50074848 Skid Adjuster 2

7 50074825 Skid Weldment, RH 1

8 50074828 Kickstand 1

9 50075506 Shield for 5’ Reverse Rotation 1

50075093 Shield for 6’ Reverse Rotation 1

10 19487BH Capscrew 1/2” x 1-3/4” Gr.5 6

11 45111BH Lockwasher 1/2” 6

12 45070BH Hex Nut 1/2” 6

13 45307BH Cotter Pin 3/16” x 1-1/2” 1

14 45059BH Flatwasher 1/2” 1

15 1273BH Presto Pin 2

16 45086BH Capscrew 3/8” x 1” 6

17 45105BH Locknut 3/8” 6

18 45066BH Flatwasher, 5/8” 2

19 50075556 Side Plate 2

SKIDS, TAILGATES and FRONT COVERS

(RT60G, RT60GR, RT72G, RT72GR)

1)1)

1)

1!

1!

1@

1@

y

u

1% 1*

i

o1^

1&

rq

e

w

1(

1(t 1)

1@1!

1)

1)y

1$1#

1@1!


42-1-2



1 50074819-10 Tailgate (Red), for 7’ Models 1

50074819-16 Tailgate (Green), for 7’ Models 1

50074819-23 Tailgate (Orange), for 7’ Models 1

50074819-28 Tailgate (Blue), for 7’ Models 1

2 50074125 Shackle, Anchor 1

3 50029803 Chain, 9 Link 1

4 50075297 Tailgate Rod, 7’ Models 1

5 50074827 Skid Weldment, LH 1

6 50074848 Skid Adjuster 2

7 50074825 Skid Weldment, RH 1

8 50074828 Kickstand 1

9 50075507 Shield for 7’ Reverse Rotation 1

10 19487BH Capscrew 1/2” x 1-3/4” Gr.5 6

11 45111BH Lockwasher 1/2” 6

12 45070BH Hex Nut 1/2” 6

13 45307BH Cotter Pin 3/16” x 1-1/2” 1

14 45059BH Flatwasher 1/2” 1

15 1273BH Presto Pin 2

16 45086BH Capscrew 3/8” x 1” 6

17 45105BH Locknut 3/8” 6

18 45066BH Flatwasher, 5/8” 2

19 50075556 Side Plate 2

SKIDS, TAILGATES and FRONT COVERS

(RT84G, RT84GR)

q

w

er

o

1&

1^

u

1)

1) y1!1@

1%

i1*

1( 1! 1@

1$1#

y1)

1)1!1@

t1)1(

1@1!


42-1-3


TOP DECK AND RELATED PARTS


2@2#2$2% r

ry

t

io

1)i

oe

1*1(2)2! oi

1)

1*1(2)2!

u

1%

t

1!io

1!

io

1@

1#1$

1$1#

1@

io

1!

2#2$2%

1^1&

q

w

2^

2^


1 50075108-10 “A” Frame RH (Red) 150075108-16 “A” Frame RH (Green) 150075108-23 “A” Frame RH (Orange) 150075108-28 “A” Frame RH (Blue) 1

2 50075109-10 “A” Frame LH (Red) 150075109-16 “A” Frame LH (Green) 150075109-23 “A” Frame LH (Orange) 150075109-28 “A” Frame LH (Blue) 1

3 50075101-10 Cover, Red 150075101-16 Cover, Green 150075101-23 Cover, Orange 150075101-28 Cover, Blue 1

4 50075103 Mast Bar 25 50033665 Cat I Bushing 26 20508 Capscrew 5/8” x 4-1/2” Gr.5 17 15925 Flatwasher 5/8” 18 15805 Lockwasher 5/8” 79 45075BH Hex Nut 5/8” 710 20206 Capscrew 5/8” x 2” Gr.8 211 15165BH Capscrew 5/8” x 1-3/4” Gr.5 412 63765 Lift Pin Cat I 2


13 15824 Lockwasher 7/8” 214 44061BH Hex Nut 7/8”UNF 215 19043 Capscrew 3/4” x 3-3/4” Gr.5 116 45305BH Lockwasher 3/4” 117 45300BH Hex Nut 3/4” 118 45086BH Capscrew 3/8” x 1-3/4” 419 45063 Flatwasher 3/8” 420 45113 Lockwasher 3/8” 421 45073 Hex Nut 3/8” 422 50035829 Manual Tube 123 45160 Capscrew 1/4” x 1” 224 45112BH Lockwasher 1/4” 225 45071BH Hex Nut 1/4” 226 15907BH Flatwasher, 5/16” 2


42-1-4



(RT84G, RT84GR Serial Numbers 1HDLR1171240096 AND BELOW)

q

w

e

r

r

ty u

io

1)

1!

1!

1!1!

1@

1@

1#

1#

1$

1$

1%

1%

i

o

o

i

o

ioi

oi

1)

1(2)2!2@

1*

1&

1(2)

1^

2%2^

t2!2@

2#

2$

2&

oi





4 50075103 Mast Bar 25 50033665 Cat I Bushing 26 20508 Capscrew 5/8” x 4-1/2” Gr.5 17 15925 Flatwasher 5/8” 18 15805 Lockwasher 5/8” 79 45075BH Hex Nut 5/8” 710 20206 Capscrew 5/8” x 2” Gr.8 2


11 15165BH Capscrew 5/8” x 1-3/4” Gr.5 412 50075144 Pin Weldment, RT 213 2850005 Klik Pin, .44” x 1.75” 214 91062 Spacer, Cat 2 STD 215 91061 Spacer 216 19043 Capscrew, 5/8” x 2” Gr. 5 117 45305BH Lockwasher, 3/4” 118 45300BH Hex Nut, 3/4” 119 45086BH Capscrew 3/8” x 1-3/4” 420 45063 Flatwasher 3/8” 421 45113 Lockwasher 3/8” 422 45073 Hex Nut 3/8” 423 50035829 Manual Tube 124 45160 Capscrew 1/4” x 1” 225 45112BH Lockwasher 1/4” 226 45071BH Hex Nut 1/4” 227 15907BH Flatwasher, 5/16” 2

Marterial Handling Repair Parts Manual


42-1-5


(RT84G, RT84GR Serial Numbers 1HDLR1171240097 AND ABOVE)





4 50075103 Mast Bar 25 50033665 Cat I Bushing 26 20508 Capscrew 5/8” x 4-1/2” Gr.5 17 15925 Flatwasher 5/8” 18 15805 Lockwasher 5/8” 79 45075BH Hex Nut 5/8” 710 20206 Capscrew 5/8” x 2” Gr.8 2


11 15165BH Capscrew 5/8” x 1-3/4” Gr.5 412 50075144 Pin Weldment, RT 213 2850005 Klik Pin, .44” x 1.75” 214 91062 Spacer, Cat 2 STD 215 91061 Spacer 216 19043 Capscrew, 5/8” x 2” Gr. 5 117 45305BH Lockwasher, 3/4” 118 45300BH Hex Nut, 3/4” 119 45086BH Capscrew 3/8” x 1-3/4” 420 45063 Flatwasher 3/8” 421 45113 Lockwasher 3/8” 422 45073 Hex Nut 3/8” 423 50035829 Manual Tube 124 45160 Capscrew 1/4” x 1” 225 45112BH Lockwasher 1/4” 226 45071BH Hex Nut 1/4” 227 15907BH Flatwasher, 5/16” 2

q

w1)

1*

1&

1(2)

1^

t2!2@

ty u

io

1(2)2!2@

e

r

r

2%2^2#

2$

2&

1#1$

1%1@

oi

1@

1$1%

1!1!

1# i o

oi

1!

1!

o

ioi

oi

1)


42-1-6

DRIVES, DRIVELINE AND RELATED PARTS

(ALL MODELS)


2#

1(

io1)

r1!

o1@

o1^

qw

1#

1$1%

e

1@o

1*

1*

1*1*o

1@

o1@

1@o

1%1$

1&u

2)2!2@

1*

t

y

o1@

1)


1 50075156 Tubing, Cover for 5’ 150075151 Tubing, Cover for 6’ 150075157 Tubing, Cover for 7’ 1

2 50075148 Bracket, Tubing 23 50071676 Shaft, Hex for 5’ 1

50071701 Shaft, Hex for 6’ 150071706 Shaft, Hex for 7’ 1

4 50075098 Gearbox Plate 15 50075249 Gearbox Assy., Center 16 50075260 Gearbox Assy, Side 17 50071675 Hub Assy., Outboard 18 44094BH Capscrew 1/2” x 1-1/4” Gr.5 29 45111BH Lockwasher 1/2” 2010 45059BH Flatwasher 1/2” 411 44076BH Capscrew 1/2” x 1-1/2” Gr.5 2


12 45070BH Hex Nut 1/2” 1413 45086BH Capscrew 3/8” x 1” Gr.5 414 45113 Lockwasher 3/8” 1015 45073 Hex Nut 3/8” 1016 20961 Capscrew 1/2” x 1-3/4” Gr.5 417 45087BH Capscrew 3/8” x 1-3/4” 618 19487BH Capscrew 1/2” x 1-3/4” 1219 50075248 Shield Assy. (See Note Below) 1

(For Later Models RT84G & RT84GRSee pg 42-1-9 for Shielding)

20 1160806 Capscrew 1/4” x 3/4” Gr.5 421 45112BH Lockwasher 1/4” 422 15907BH Flatwasher, 5/16” 423 50071668 Driveshaft Assy (See Note Below) 1

50080581 Driveshaft Assy, 4 Plate Clutch 1(For Later Models RT84G & RT84GR)

Note: Used on RT60G, RT60GR, RT72G, RT72GRand Earlier Models RT84G, RT84GR


42-1-7

DRIVESHAFT ASSEMBLY

(Models: RT60G, RT60GR, RT72G & RT72GR &

Earlier Models RT84G, RT84GR)


Ref. Part Description Qty.

No. No. Req’d.

1 50072088 Push Pin End Yoke 1

2 50072089 Cross Bearing 2

3 50072090 Outer Triangle Yoke 1

4 50072091 Nylon Bearing 1

5 50072092 Inner Nylon Bearing 1

6 50072093 Inner Triangular Yoke 1

7 50072094 Friction Clutch Assy. 1

8 50072095 Push Pin 1

9 50072096 Push Pin Spring 1

10 50072097 Decal, Outer 1

11 50072098 Tension Pin M8 x 60 1

12 50072099 Tension Pin M8 x 55 1

13 50072101 Decal, Inner 1

14 50072102 Friction Disk 1


No. No. Req’d.

15 50078224 Hex Nut M10 8

16 50078225 Spring 8

17 50078226 Bolt M10 x 80 8

18 50078227 Flanged Yoke 1

19 50078228 Bushing 1

20 50078229 Hub 1

21 50078230 Bolt M12-1.25 x 65 1

22 50078231 Washer 1

23 50078232 Nut M12 1

24 50078541 Internal Disc 1

25 50078234 Outer Pressure Plate 1

26 50072103 Complete Shield Pk. 1

27 50071668 Driveshaft Assembly 1


42-1-8


DRIVESHAFT ASSEMBLY

(For Later Models: RT84G & RT84GR)


No. No. Req’d.

1 50072088 Push Pin End Yoke 1

2 50072089 Cross Bearing 2

3 50072090 Outer Triangle Yoke 1

4 -------- Outer Triangle Tube 1

5 50072091 Nylon Bearing 1

6 -------- Plastic Cone 1

7 -------- Outer Plastic Tube 1

8 -------- Inner Plastic Tube 1

9 -------- Plastic Cone 1

10 50072092 Inner Nylon Bearing 1

11 -------- Inner Triangle Tube 1

12 50072093 Inner Triangle Yoke 1

13 50080582 4FF3 Friction Yoke 1

14 50072095 Push Pin 1

15 50072096 Push Pin Spring 1

16 50072097 Outer Sticker 1

17 50072098 Tension Pin 08 x 60 1

18 50072099 Tension Pin 08 x 55 1


No. No. Req’d.

19 50072101 Inner Sticker 1

20 50078224 Hex Nut 8

21 50080583 Spring 8

22 50080584 Bolt 8

23 50080585 Flanged Yoke 1

24 50078228 Bushing 1

25 50080586 Friction Disc 4

26 50080587 Baffle 1

27 50080588 Internal Disc 2

28 50080589 Hub 1

29 50080590 Outer Pressure Plate 1

30 50080591 Bolt 2

31 50078231 Washer 2

32 50078232 Nut 2

33 50080581 Driveshaft Assembly 1


42-1-9

September, 2019

DRIVESHAFT SHIELDING

USED FOR DRIVELINE ASSEMBLY 50080581

(For Later Models: RT84G & RT84GR)



No. No. Req’d.

1 50081323 Cover 1

2 50081328 Cover Mount Assy 1

3 D546 Decal, Danger (Guard Missing) 1

4 1160806 Capscrew, 1/4” x 3/4” G5 ZP 7

5 45112BH Lockwasher, 1/4” YZ 7

6 45065BH Flatwasher, 5/16” YZ 4

1

23

4

4

4

45

55

5

6


42-1-10

CENTER GEARBOX ASSEMBLY



1 50072008 Shaft, Output 1

2 50072009 Key 1

3 50072010 Gear, Output 1

4 50075263 Housing, Gearbox 1

5 50072012 Cap, Input 1

6 50075262 Gear Shaft, Input 1

7 50072014 Seal 1

8 50075522 Retaining Ring 1

9 50072016 Screw 4

10 50072017 Washer 4

11 50072018 Gasket .3MM Thick 1

50072019 Gasket .5MM Thick 1

12 50075261 Bearing 1

13 50072021 Bearing 2


14 50072022 Bearing 2


16 50072024 Seal 2

17 50072025 Gasket, Rectangle 1

18 50072026 Cap 1

19 50072027 Washer 4

20 50072028 Screw 4

21 50072029 Pipe Plug - Inner 1

22 50072030 Pipe Plug, Sq. Head 1

23 50072031 Relief, Pressure 1


25 50072033 Washer 1

26 50075264 Snap Ring 2

27 50075249 Gearbox Assembly 1

27


42-1-11

SIDE GEARBOX ASSEMBLY


40


42-1-12

SIDE GEARBOX ASSEMBLY


Item Part Description Qty.

No. No. Req’d.

1 50075267 Plate, Side Housing 1

2 50072035 Saddle, Input Bearing 1

3 50072036 Spacer 1

4 50072037 Sealed Cap 1

5 50072038 Shaft, Input Gear 1

6 50072039 Gasket .5mm, Input *

7 50072066 Gasket .3mm, Input *

8 50071994 Washer 2

9 50072068 Pinion Gear 1

10 50072069 Gear, Output 1

11 50078223 Flange w/output Shaft 1

13 50072071 Bearing Saddle, Output 1

14 50072072 Spacer 1

15 50072073 Gasket .5mm, Output *

16 50072074 Gasket .3mm, Output *

17 50075517 Seal 1

18 50075268 Side Cover 1

19 50072077 Seal, Output 2

20 50072078 Bearing 1


22 50072028 Screw 7

23 50072027 Washer 29

24 50071998 Screw 2

25 50071999 Hub Washer 2

26 50072080 Ball Bearing 1

27 50072002 Seal 1


29 50072022 Bearing 2



32 50072083 Screw 17

33 50072087 Flatwasher 1

34 50072085 Screw , Inner Hex 6


36 50072031 Pressure Relief Plug 1

37 50075519 Seal Ring 10MM. 1


39 50077061 Snap Ring 1

40 50075260 Side Gearbox Assy. 1

*As Required


42-1-13

OUTBOARD HUB ASSEMBLY


1314

12

14

5

6710

3

89

11

2

15


No. No. Req’d.

1 50071992 Bearing Saddle 1

2 50071993 Hub Cap 1

3 50071994 Ring 1

4 50071995 Flange w/ Output Shaft 1

5 50071996 Hub Shaft 1

6 50071997 Hub Gasket *

7 50071997 Hub Gasket *

8 50071998 Screw 1

9 50071999 Hub Washer 1

10 50072000 Ball Bearing 1

11 50072001 Hub Nozzle 1

12 50072077 Seal 2

13 50072003 Screw 6

14 50072004 Hub Washer 6

15 50071675 Outboard Hub Assy. 1

* As Required


42-1-14

FIVE FOOT TINE BAR ASSEMBLY


1

2 3

4

5

6


No. No. Req’d.

50072005 5’ Tine Bar Assy. 1

1 50071671 Bolt 9/16” x 1-1/2” NF Gr. 5 84

2 08311800 Hex Nut 9/16” NF 84

3 50020933 Lockwasher 9/16” 84

4 50071677 5’ Bar 1

5 50071695 Tine RH 21

6 50071696 Tine LH 21


42-1-15


SIX FOOT TINE BAR ASSEMBLY

1

2 3

4

5

6


No. No. Req’d.

50072006 6’ Tine Bar Assy. 1

1 50071671 Bolt 9/16” x 1-1/2” NF Gr. 5 108

2 08311800 Hex Nut 9/16” NF 108

3 50020933 Lockwasher 9/16” 108

4 50071700 6’ Bar 1

5 50071695 Tine RH 27

6 50071696 Tine LH 27


42-1-16



No. No. Req’d.

50072007 7’ Tine Bar Assy. 1

1 50071671 Bolt 9/16” x 1-1/2” NF Gr. 5 132

2 08311800 Hex Nut 9/16” NF 132

3 50020933 Lockwasher 9/16” 132

4 50071707 7’ Bar 1

5 50071695 Tine RH 33

6 50071696 Tine LH 33

SEVEN FOOT TINE BAR ASSEMBLY

4

53 1

26


42-1-17

November, 2019



No. No. Req’d.

1 50081418 Lift Arm 2

2 ------- Capscrew, 5/8” x 2-1/2” Gr. 5 ZP 4

3 ------- Capscrew, 7/8” x 3” Gr. 5 ZP 2

4 15824 Lockwasher, 7/8” CP 2

5 19503 Hex Nut, 7/8”, CP 2

HITCH EXTENSION KIT (Optional)

50081431

1

1

2

2

3

3

4

4

5

Existing Nuts& Washers

Existing Pinsw/Nuts


42-1-18

DECALS



q

w

e

r

t

y

u

i

o

1)

1!

1!1@

1#

1$

1%

1^

ITEM PART NO. DESCRIPTION QTY.

1 N/A Serial No. Decal 1

2 50075239 Decal, Model Number RT60G 1

50075523 Decal, Model Number RT60GR 1

50075240 Decal, Model Number RT72G 1


3 50061049 Decal, Bush Hog Logo 1

4 50075245 Decal, Roto Hog Series 1

5 50076462 Decal, Gear Drive Logo 1

6 50074259 Decal, Made in USA 1

7 50035829 Storage Tube, Operators Manual 1

8 D859 Decal, Genuine Parts Warning 1


10 D547 Decal, Danger 1

11 50031214 Decal, Red Reflector 2

12 50031212 Decal, Amber Reflector 1

13 81067 Decal, Keep Away Rotating Tines 1

14 78413 Decal, Read Manual 1

15 D628 Decal, Crush Hazard / Pinch Points 1

16 D829 Decal, Danger Multilingual 1


42-1-19


DECALS

(RT84G, RT84GR)

q

w

1)

o

1@

t1^1%

1!

1$

e

yi

u

r1!

1#

ITEM PART NO. DESCRIPTION QTY.

1 N/A Serial No. Decal 1

2 50075241 Decal, Model Number RT84G 1


3 50061049 Decal, Bush Hog Logo 1

4 50075245 Decal, Roto Hog Series 1

5 50076462 Decal, Gear Drive Logo 1

6 50074259 Decal, Made in USA 1

7 50035829 Storage Tube, Operators Manual 1

8 D859 Decal, Genuine Parts Warning 1


10 D547 Decal, Danger 1

11 50031214 Decal, Red Reflector 2

12 50031212 Decal, Amber Reflector 1

13 81067 Decal, Keep Away Rotating Tines 1

14 78413 Decal, Read Manual 1

15 D628 Decal, Crush Hazard / Pinch Points 1

16 D829 Decal, Danger Multilingual 1

• SELMA, AL 3670WWW.BUSHHOG.COM

models rt60g, rt60gr, rt72g, rt72gr, rt84g, rt84gr … · 2020. 1. 28. · 2. if the unit has been...

Documents