modular manual scanning system - anasayfa · 2017. 4. 6. · e olympus epoch xt n olympus umb1...
TRANSCRIPT
Modular Manual Scanning System
Manual and Motorized Scanners for NDT
The Stix is a modular probe holding system that can be used to create a custom scanner for any type of inspection. The system employs modular “building blocks” that are interchange-able and can be used to assemble a variety of different probe configurations. The Stix is com-pletely configurable for both phased array and traditional UT with single or multiple probes.
Features ▪ Modular Design: Using components from various Jireh
product families, any STIX system can be quickly config-ured for many different scanning requirements.
▪ Brake system: A park brake is provided to hold the scan-ner in any desired location.
▪ Wheels: The magnetic wheels are coated with urethane to prevent foreign debris from hindering smooth rolling of the scanner. The magnetic attraction may be increased by adding additional wheels.
▪ Encoder: Each Stix system includes a spring loaded en-coder module to ensure accurate positioning. The encoder output is fully compatible with all standard instruments.
Specifications ▪ Pipe Range: 1.5” – Flat
▪ Encoder Resolution: 19.2 steps/mm (Encoder input compatible with all major UT instruments)
▪ Probe Holding Capacity: 4
▪ Umbilical Length: 5m
▪ Inspection Surface: Ferrous materials
▪ Slide bar Length: 30 - 45cm
www.jireh-industries.com
Standard Kits2 Probe (Small Probe Holders)
2 Probe (Standard Probe Holders)
BGG001
BGG002
BGG003 4 Probe
BGG004 4 Probe, Dual Y Axis Adjustment
Jireh Industries Ltd.53158 Range Road 224Ardrossan, AlbertaCanada T8E 2K4
ph: 780-922-4534 www.jireh-industries.com
Ordering Info
Umbilical Company/InstrumentA Flying Leads
B Olympus OmniScan
C Olympus Focus LT
E Olympus Epoch XT
N Olympus UMB1 Umbilical (single axis encoder output)
B Harfang X32
F AGR TD Focus Scan
F AGR TD Handy Scan
F AGR TD Scan
F AGR TD Pocket Scan
G Sonotron Isonic
J Jireh Breakout Bell
K AIS NP3 Nanopulser
L US Ultratek PCIUT3100T
M Scantech Analyst
Button Style Pivot Hole Size Hex Size01 8.0mm (0.315”) 9.53mm (3/8”)
02 5.0mm (0.197”) 9.53mm (3/8”)
03 2.7mm (0.106”) 9.53mm (3/8”)
04 9.5mm (0.375”) 11.1mm (7/16”)
06 3.0mm (0.118”) 9.53mm (3/8”)
07 2.3mm (0.090”) 9.53mm (3/8”)
Umbilical Style Pivot Button Style
© 2010 Jireh Industries. All specifications are subject to change without notice. All brands are trademarks or registered trademarks of their respective owners and third party entities.
BGG001 - a -
Probe Holder Pivot Button Style
Umbilcal Style
BGG002 - a -
Probe Holder Pivot Button Style
Umbilcal Style
BGG003 - a - K -
Primary Probe Holder Pivot Button Style (qty: 2)
Umbilcal Style
Secondary Probe Holder Pivot Button Style (qty: 2)
BGG004 - a - K -
Primary Probe Holder Pivot Button Style (qty: 2)
Umbilcal Style
Secondary Probe Holder Pivot Button Style (qty: 2)